256 lines
7.5 KiB
C
256 lines
7.5 KiB
C
/*
|
||
* File : lcd_x35.c
|
||
* This file is part of RT-Thread RTOS
|
||
* COPYRIGHT (C) 2010, RT-Thread Develop Team
|
||
*
|
||
* The license and distribution terms for this file may be
|
||
* found in the file LICENSE in this distribution or at
|
||
* http://www.rt-thread.org/license/LICENSE
|
||
*
|
||
* Change Logs:
|
||
* Date Author Notes
|
||
* 2010-01-01 bernard first version from QiuYi's driver
|
||
* 2011-07-13 Manoel Modifications on lcd_n35.c to support X35 LCD
|
||
* ACX502BMU - 7522J16D SONY
|
||
*/
|
||
|
||
#include <rtthread.h>
|
||
#include <s3c24x0.h>
|
||
|
||
#include "lcd.h"
|
||
|
||
/* LCD driver for X3'5 */
|
||
#define LCD_WIDTH 240 // xres
|
||
#define LCD_HEIGHT 320 // yres
|
||
#define LCD_PIXCLOCK 7 // clock
|
||
|
||
#define LCD_RIGHT_MARGIN 23 // margin_right
|
||
#define LCD_LEFT_MARGIN 0 // margin_left
|
||
#define LCD_HSYNC_LEN 5 // hsync
|
||
|
||
#define LCD_UPPER_MARGIN 1 // margin_top
|
||
#define LCD_LOWER_MARGIN 3 // margin_botton
|
||
#define LCD_VSYNC_LEN 9 // vsync
|
||
|
||
#define LCD_XSIZE LCD_WIDTH
|
||
#define LCD_YSIZE LCD_HEIGHT
|
||
#define SCR_XSIZE LCD_WIDTH
|
||
#define SCR_YSIZE LCD_HEIGHT
|
||
|
||
#define RT_HW_LCD_WIDTH LCD_WIDTH
|
||
#define RT_HW_LCD_HEIGHT LCD_HEIGHT
|
||
|
||
#define MVAL (13)
|
||
#define MVAL_USED (0) //0=each frame 1=rate by MVAL
|
||
#define INVVDEN (1) //0=normal 1=inverted
|
||
#define BSWP (0) //Byte swap control
|
||
#define HWSWP (1) //Half word swap control
|
||
|
||
#define GPB1_TO_OUT() (GPBUP &= 0xfffd, GPBCON &= 0xfffffff3, GPBCON |= 0x00000004)
|
||
#define GPB1_TO_1() (GPBDAT |= 0x0002)
|
||
#define GPB1_TO_0() (GPBDAT &= 0xfffd)
|
||
|
||
#define S3C2410_LCDCON1_CLKVAL(x) ((x) << 8)
|
||
#define S3C2410_LCDCON1_MMODE (1<<7)
|
||
#define S3C2410_LCDCON1_DSCAN4 (0<<5)
|
||
#define S3C2410_LCDCON1_STN4 (1<<5)
|
||
#define S3C2410_LCDCON1_STN8 (2<<5)
|
||
#define S3C2410_LCDCON1_TFT (3<<5)
|
||
|
||
#define S3C2410_LCDCON1_STN1BPP (0<<1)
|
||
#define S3C2410_LCDCON1_STN2GREY (1<<1)
|
||
#define S3C2410_LCDCON1_STN4GREY (2<<1)
|
||
#define S3C2410_LCDCON1_STN8BPP (3<<1)
|
||
#define S3C2410_LCDCON1_STN12BPP (4<<1)
|
||
|
||
#define S3C2410_LCDCON1_TFT1BPP (8<<1)
|
||
#define S3C2410_LCDCON1_TFT2BPP (9<<1)
|
||
#define S3C2410_LCDCON1_TFT4BPP (10<<1)
|
||
#define S3C2410_LCDCON1_TFT8BPP (11<<1)
|
||
#define S3C2410_LCDCON1_TFT16BPP (12<<1)
|
||
#define S3C2410_LCDCON1_TFT24BPP (13<<1)
|
||
|
||
#define S3C2410_LCDCON1_ENVID (1)
|
||
|
||
#define S3C2410_LCDCON1_MODEMASK 0x1E
|
||
|
||
#define S3C2410_LCDCON2_VBPD(x) ((x) << 24)
|
||
#define S3C2410_LCDCON2_LINEVAL(x) ((x) << 14)
|
||
#define S3C2410_LCDCON2_VFPD(x) ((x) << 6)
|
||
#define S3C2410_LCDCON2_VSPW(x) ((x) << 0)
|
||
|
||
#define S3C2410_LCDCON2_GET_VBPD(x) ( ((x) >> 24) & 0xFF)
|
||
#define S3C2410_LCDCON2_GET_VFPD(x) ( ((x) >> 6) & 0xFF)
|
||
#define S3C2410_LCDCON2_GET_VSPW(x) ( ((x) >> 0) & 0x3F)
|
||
|
||
#define S3C2410_LCDCON3_HBPD(x) ((x) << 19)
|
||
#define S3C2410_LCDCON3_WDLY(x) ((x) << 19)
|
||
#define S3C2410_LCDCON3_HOZVAL(x) ((x) << 8)
|
||
#define S3C2410_LCDCON3_HFPD(x) ((x) << 0)
|
||
#define S3C2410_LCDCON3_LINEBLANK(x)((x) << 0)
|
||
|
||
#define S3C2410_LCDCON3_GET_HBPD(x) ( ((x) >> 19) & 0x7F)
|
||
#define S3C2410_LCDCON3_GET_HFPD(x) ( ((x) >> 0) & 0xFF)
|
||
|
||
#define S3C2410_LCDCON4_MVAL(x) ((x) << 8)
|
||
#define S3C2410_LCDCON4_HSPW(x) ((x) << 0)
|
||
#define S3C2410_LCDCON4_WLH(x) ((x) << 0)
|
||
|
||
#define S3C2410_LCDCON4_GET_HSPW(x) ( ((x) >> 0) & 0xFF)
|
||
|
||
#define S3C2410_LCDCON5_BPP24BL (1<<12)
|
||
#define S3C2410_LCDCON5_FRM565 (1<<11)
|
||
#define S3C2410_LCDCON5_INVVCLK (1<<10)
|
||
#define S3C2410_LCDCON5_INVVLINE (1<<9)
|
||
#define S3C2410_LCDCON5_INVVFRAME (1<<8)
|
||
#define S3C2410_LCDCON5_INVVD (1<<7)
|
||
#define S3C2410_LCDCON5_INVVDEN (1<<6)
|
||
#define S3C2410_LCDCON5_INVPWREN (1<<5)
|
||
#define S3C2410_LCDCON5_INVLEND (1<<4)
|
||
#define S3C2410_LCDCON5_PWREN (1<<3)
|
||
#define S3C2410_LCDCON5_ENLEND (1<<2)
|
||
#define S3C2410_LCDCON5_BSWP (1<<1)
|
||
#define S3C2410_LCDCON5_HWSWP (1<<0)
|
||
|
||
#define S3C2410_LCDINT_FRSYNC (1<<1)
|
||
|
||
static volatile rt_uint16_t _rt_framebuffer[RT_HW_LCD_HEIGHT][RT_HW_LCD_WIDTH];
|
||
//static volatile rt_uint16_t _rt_hw_framebuffer[RT_HW_LCD_HEIGHT][RT_HW_LCD_WIDTH];
|
||
static struct rt_device_graphic_info _lcd_info;
|
||
|
||
static void lcd_power_enable(int invpwren, int pwren)
|
||
{
|
||
//GPG4 is setted as LCD_PWREN
|
||
GPGUP = GPGUP | (1<<4); // Pull-up disable
|
||
GPGCON = GPGCON | (3<<8); //GPG4=LCD_PWREN
|
||
|
||
//Enable LCD POWER ENABLE Function
|
||
LCDCON5 = LCDCON5&(~(1<<3))|(pwren<<3); // PWREN
|
||
LCDCON5 = LCDCON5&(~(1<<5))|(invpwren<<5); // INVPWREN
|
||
}
|
||
|
||
static void lcd_envid_on_off(int onoff)
|
||
{
|
||
if(onoff==1)
|
||
/*ENVID=ON*/
|
||
LCDCON1|=1;
|
||
else
|
||
/*ENVID Off*/
|
||
LCDCON1 =LCDCON1 & 0x3fffe;
|
||
}
|
||
|
||
//********************** BOARD LCD backlight ****************************
|
||
static void LcdBkLtSet(rt_uint32_t HiRatio)
|
||
{
|
||
#define FREQ_PWM1 1000
|
||
if(!HiRatio)
|
||
{
|
||
GPBCON = GPBCON & (~(3<<2)) | (1<<2) ; //GPB1<42><31><EFBFBD><EFBFBD>Ϊoutput
|
||
GPBDAT &= ~(1<<1);
|
||
return;
|
||
}
|
||
GPBCON = GPBCON & (~(3<<2)) | (2<<2) ;
|
||
|
||
if( HiRatio > 100 ) HiRatio = 100 ;
|
||
|
||
TCON = TCON & (~(0xf<<8)) ; // clear manual update bit, stop Timer1
|
||
|
||
TCFG0 &= 0xffffff00; // set Timer 0&1 prescaler 0
|
||
TCFG0 |= 15; //prescaler = 15+1
|
||
|
||
TCFG1 &= 0xffffff0f; // set Timer 1 MUX 1/16
|
||
TCFG1 |= 0x00000030; // set Timer 1 MUX 1/16
|
||
|
||
TCNTB1 = ( 100000000>>8 )/FREQ_PWM1; //if set inverter off, when TCNT2<=TCMP2, TOUT is high, TCNT2>TCMP2, TOUT is low
|
||
TCMPB1 = ( TCNTB1*(100-HiRatio))/100 ; //if set inverter on, when TCNT2<=TCMP2, TOUT is low, TCNT2>TCMP2, TOUT is high
|
||
|
||
TCON = TCON & (~(0xf<<8)) | (0x0e<<8) ;
|
||
TCON = TCON & (~(0xf<<8)) | (0x0d<<8) ;
|
||
}
|
||
|
||
/* RT-Thread Device Interface */
|
||
static rt_err_t rt_lcd_init (rt_device_t dev)
|
||
{
|
||
GPB1_TO_OUT();
|
||
GPB1_TO_1();
|
||
|
||
GPCUP = 0x00000000;
|
||
GPCCON = 0xaaaa02a9;
|
||
|
||
GPDUP = 0x00000000;
|
||
GPDCON = 0xaaaaaaaa;
|
||
|
||
#define M5D(n) ((n)&0x1fffff)
|
||
#define LCD_ADDR ((rt_uint32_t)_rt_framebuffer)
|
||
LCDCON1 = (LCD_PIXCLOCK << 8) | (3 << 5) | (12 << 1);
|
||
LCDCON2 = (LCD_UPPER_MARGIN << 24) | ((LCD_HEIGHT - 1) << 14) | (LCD_LOWER_MARGIN << 6) | (LCD_VSYNC_LEN << 0);
|
||
LCDCON3 = (LCD_RIGHT_MARGIN << 19) | ((LCD_WIDTH - 1) << 8) | (LCD_LEFT_MARGIN << 0);
|
||
LCDCON4 = (13 << 8) | (LCD_HSYNC_LEN << 0);
|
||
|
||
#define LCD_CON5 (S3C2410_LCDCON5_FRM565 | S3C2410_LCDCON5_INVVDEN | S3C2410_LCDCON5_INVVFRAME | \
|
||
S3C2410_LCDCON5_INVVLINE | S3C2410_LCDCON5_INVVCLK | S3C2410_LCDCON5_PWREN| S3C2410_LCDCON5_HWSWP)
|
||
|
||
#if !defined(LCD_CON5)
|
||
#define LCD_CON5 ((1<<11) | (1 << 9) | (1 << 8) | (1 << 3) | (1 << 0))
|
||
#endif
|
||
LCDCON5 = LCD_CON5;
|
||
|
||
LCDSADDR1 = ((LCD_ADDR >> 22) << 21) | ((M5D(LCD_ADDR >> 1)) << 0);
|
||
LCDSADDR2 = M5D((LCD_ADDR + LCD_WIDTH * LCD_HEIGHT * 2) >> 1);
|
||
LCDSADDR3 = LCD_WIDTH;
|
||
|
||
LCDINTMSK |= (3);
|
||
LPCSEL &= (~7) ;
|
||
TPAL=0;
|
||
|
||
LcdBkLtSet(70) ;
|
||
lcd_power_enable(0, 1);
|
||
lcd_envid_on_off(1);
|
||
|
||
return RT_EOK;
|
||
}
|
||
|
||
static rt_err_t rt_lcd_control (rt_device_t dev, rt_uint8_t cmd, void *args)
|
||
{
|
||
switch (cmd)
|
||
{
|
||
case RTGRAPHIC_CTRL_RECT_UPDATE:
|
||
break;
|
||
case RTGRAPHIC_CTRL_POWERON:
|
||
break;
|
||
case RTGRAPHIC_CTRL_POWEROFF:
|
||
break;
|
||
case RTGRAPHIC_CTRL_GET_INFO:
|
||
rt_memcpy(args, &_lcd_info, sizeof(_lcd_info));
|
||
break;
|
||
case RTGRAPHIC_CTRL_SET_MODE:
|
||
break;
|
||
}
|
||
|
||
return RT_EOK;
|
||
}
|
||
|
||
void rt_hw_lcd_init(void)
|
||
{
|
||
rt_device_t lcd = rt_malloc(sizeof(struct rt_device));
|
||
if (lcd == RT_NULL) return; /* no memory yet */
|
||
|
||
_lcd_info.bits_per_pixel = 16;
|
||
_lcd_info.pixel_format = RTGRAPHIC_PIXEL_FORMAT_RGB565P;
|
||
_lcd_info.framebuffer = (void*)_rt_framebuffer;
|
||
_lcd_info.width = LCD_WIDTH;
|
||
_lcd_info.height = LCD_HEIGHT;
|
||
|
||
/* init device structure */
|
||
lcd->type = RT_Device_Class_Unknown;
|
||
lcd->init = rt_lcd_init;
|
||
lcd->open = RT_NULL;
|
||
lcd->close = RT_NULL;
|
||
lcd->control = rt_lcd_control;
|
||
lcd->user_data = (void*)&_lcd_info;
|
||
|
||
/* register lcd device to RT-Thread */
|
||
rt_device_register(lcd, "lcd", RT_DEVICE_FLAG_RDWR);
|
||
}
|
||
|