rt-thread-official/bsp/tkm32F499/drivers/lcd/lcd.h

76 lines
2.9 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
* Copyright (c) 2006-2021, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2021-10-14 spaceman first version
*/
#include <board.h>
// #define XSIZE_PHYS 800
// #define YSIZE_PHYS 480
// extern __align(256) rt_uint32_t LTDC_Buf[XSIZE_PHYS*YSIZE_PHYS];
#define LCD_SPI_CS(a) \
if (a) \
GPIOB->BSRR = GPIO_Pin_11; \
else \
GPIOB->BRR = GPIO_Pin_11;
#define SPI_DCLK(a) \
if (a) \
GPIOB->BSRR = GPIO_Pin_9; \
else \
GPIOB->BRR = GPIO_Pin_9;
#define SPI_SDA(a) \
if (a) \
GPIOB->BSRR = GPIO_Pin_0; \
else \
GPIOB->BRR = GPIO_Pin_0;
#define LCD_RST(a) \
if (a) \
GPIOD->BSRR = GPIO_Pin_6; \
else \
GPIOD->BRR = GPIO_Pin_6;
#define Set_Rst GPIOD->BSRR = GPIO_Pin_6
#define Clr_Rst GPIOD->BRR = GPIO_Pin_6
#define Lcd_Light_ON GPIOD->BSRR = GPIO_Pin_8 //PD8为高电平 背光打开
#define Lcd_Light_OFF GPIOD->BRR = GPIO_Pin_8 //PD8为低电平 背光关闭
//************* 24位色1600万色定义 *************//
#define White 0xFFFFFF
#define Black 0x000000
#define Blue 0xFF0000
#define Blue2 0xFF3F3F
#define Red 0x0000FF
#define Magenta 0xFF00FF
#define Green 0x00FF00
#define Cyan 0xFFFF00
#define Yellow 0x00FFFF
//************* 16位色定义 *************//
//#define White 0xFFFF
//#define Black 0x0000
//#define Blue 0x001F
//#define Blue2 0x051F
//#define Red 0xF800
//#define Magenta 0xF81F
//#define Green 0x07E0
//#define Cyan 0x7FFF
//#define Yellow 0xFFE0
void LCD_Initial(rt_uint32_t LTDC_Buf1, rt_uint32_t LTDC_Buf2); //LCD初始化函数
// volatile void LCD_delay(volatile int time);
// void WriteComm(unsigned char CMD);
// void WriteData(rt_uint32_t dat);
// void LCD_WR_REG(rt_uint16_t Index,rt_uint16_t CongfigTemp);
// void Lcd_ColorBox(rt_uint16_t xStart,rt_uint16_t yStart,rt_uint16_t xLong,rt_uint16_t yLong,rt_uint32_t Color);
//void SPILCD_DrawLine(unsigned short x1,unsigned short y1,unsigned short x2,unsigned short y2,unsigned short color);
//void SPILCD_ShowChar(unsigned short x,unsigned short y,unsigned char num, unsigned int fColor, unsigned int bColor,unsigned char flag) ;
// void LCD_PutString(unsigned short x, unsigned short y, char *s, unsigned int fColor, unsigned int bColor,unsigned char flag);
// void LCD_Fill_Pic(rt_uint16_t x, rt_uint16_t y,rt_uint16_t pic_H, rt_uint16_t pic_V, rt_uint32_t* pic);