rt-thread-official/bsp/xplorer4330/libraries/lpc_ip/qei_001.h

91 lines
3.6 KiB
C

/*
* @brief Quadrature Encoder Interface Registers and control functions
*
* @note
* Copyright(C) NXP Semiconductors, 2012
* All rights reserved.
*
* @par
* Software that is described herein is for illustrative purposes only
* which provides customers with programming information regarding the
* LPC products. This software is supplied "AS IS" without any warranties of
* any kind, and NXP Semiconductors and its licensor disclaim any and
* all warranties, express or implied, including all implied warranties of
* merchantability, fitness for a particular purpose and non-infringement of
* intellectual property rights. NXP Semiconductors assumes no responsibility
* or liability for the use of the software, conveys no license or rights under any
* patent, copyright, mask work right, or any other intellectual property rights in
* or to any products. NXP Semiconductors reserves the right to make changes
* in the software without notification. NXP Semiconductors also makes no
* representation or warranty that such application will be suitable for the
* specified use without further testing or modification.
*
* @par
* Permission to use, copy, modify, and distribute this software and its
* documentation is hereby granted, under NXP Semiconductors' and its
* licensor's relevant copyrights in the software, without fee, provided that it
* is used in conjunction with NXP Semiconductors microcontrollers. This
* copyright, permission, and disclaimer notice must appear in all copies of
* this code.
*/
#ifndef __QEI_001_H_
#define __QEI_001_H_
#include "sys_config.h"
#include "cmsis.h"
#ifdef __cplusplus
extern "C" {
#endif
/** @defgroup IP_QEI_001 IP: QEI register block and driver
* @ingroup IP_Drivers
* Quadrature Encoder Interface
* @{
*/
/**
* @brief Quadrature Encoder Interface register block structure
*/
typedef struct { /*!< QEI Structure */
__O uint32_t CON; /*!< Control register */
__I uint32_t STAT; /*!< Encoder status register */
__IO uint32_t CONF; /*!< Configuration register */
__I uint32_t POS; /*!< Position register */
__IO uint32_t MAXPOS; /*!< Maximum position register */
__IO uint32_t CMPOS0; /*!< position compare register 0 */
__IO uint32_t CMPOS1; /*!< position compare register 1 */
__IO uint32_t CMPOS2; /*!< position compare register 2 */
__I uint32_t INXCNT; /*!< Index count register */
__IO uint32_t INXCMP0; /*!< Index compare register 0 */
__IO uint32_t LOAD; /*!< Velocity timer reload register */
__I uint32_t TIME; /*!< Velocity timer register */
__I uint32_t VEL; /*!< Velocity counter register */
__I uint32_t CAP; /*!< Velocity capture register */
__IO uint32_t VELCOMP; /*!< Velocity compare register */
__IO uint32_t FILTERPHA; /*!< Digital filter register on input phase A (QEI_A) */
__IO uint32_t FILTERPHB; /*!< Digital filter register on input phase B (QEI_B) */
__IO uint32_t FILTERINX; /*!< Digital filter register on input index (QEI_IDX) */
__IO uint32_t WINDOW; /*!< Index acceptance window register */
__IO uint32_t INXCMP1; /*!< Index compare register 1 */
__IO uint32_t INXCMP2; /*!< Index compare register 2 */
__I uint32_t RESERVED0[993];
__O uint32_t IEC; /*!< Interrupt enable clear register */
__O uint32_t IES; /*!< Interrupt enable set register */
__I uint32_t INTSTAT; /*!< Interrupt status register */
__I uint32_t IE; /*!< Interrupt enable register */
__O uint32_t CLR; /*!< Interrupt status clear register */
__O uint32_t SET; /*!< Interrupt status set register */
} IP_QEI_001_Type;
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __QEI_001_H_ */