408 lines
13 KiB
C
408 lines
13 KiB
C
//*****************************************************************************
|
|
//
|
|
// am_hal_interrupt.c
|
|
//! @file
|
|
//!
|
|
//! @brief Helper functions supporting interrupts and NVIC operation.
|
|
//!
|
|
//! These functions may be used for NVIC-level interrupt configuration.
|
|
//!
|
|
//! @addtogroup interrupt2 Interrupt (ARM NVIC support functions)
|
|
//! @ingroup apollo2hal
|
|
//! @{
|
|
//
|
|
//*****************************************************************************
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Copyright (c) 2017, Ambiq Micro
|
|
// All rights reserved.
|
|
//
|
|
// Redistribution and use in source and binary forms, with or without
|
|
// modification, are permitted provided that the following conditions are met:
|
|
//
|
|
// 1. Redistributions of source code must retain the above copyright notice,
|
|
// this list of conditions and the following disclaimer.
|
|
//
|
|
// 2. Redistributions in binary form must reproduce the above copyright
|
|
// notice, this list of conditions and the following disclaimer in the
|
|
// documentation and/or other materials provided with the distribution.
|
|
//
|
|
// 3. Neither the name of the copyright holder nor the names of its
|
|
// contributors may be used to endorse or promote products derived from this
|
|
// software without specific prior written permission.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
|
|
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
// POSSIBILITY OF SUCH DAMAGE.
|
|
//
|
|
// This is part of revision 1.2.11 of the AmbiqSuite Development Package.
|
|
//
|
|
//*****************************************************************************
|
|
|
|
#include <stdint.h>
|
|
#include <stdbool.h>
|
|
#include "am_mcu_apollo.h"
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Enable an interrupt.
|
|
//!
|
|
//! @param ui32Interrupt The ISR number of the interrupt to be enabled.
|
|
//!
|
|
//! This function enables an interrupt signal to the NVIC based on the provided
|
|
//! ISR number.
|
|
//!
|
|
//! @return None
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_interrupt_enable(uint32_t ui32Interrupt)
|
|
{
|
|
//
|
|
// Check to see what type of interrupt this is.
|
|
//
|
|
if ( ui32Interrupt > 15 )
|
|
{
|
|
//
|
|
// If this ISR number corresponds to a "normal" peripheral interrupt,
|
|
// enable it using the NVIC register.
|
|
//
|
|
AM_REG(NVIC, ISER0) = 0x1 << ((ui32Interrupt - 16) & 0x1F);
|
|
}
|
|
else
|
|
{
|
|
//
|
|
// If this is an ARM internal interrupt number, route it to the
|
|
// appropriate enable register.
|
|
//
|
|
switch(ui32Interrupt)
|
|
{
|
|
case AM_HAL_INTERRUPT_BUSFAULT:
|
|
AM_BFW(SYSCTRL, SHCSR, BUSFAULTENA, 1);
|
|
break;
|
|
|
|
case AM_HAL_INTERRUPT_USAGEFAULT:
|
|
AM_BFW(SYSCTRL, SHCSR, USAGEFAULTENA, 1);
|
|
break;
|
|
|
|
case AM_HAL_INTERRUPT_MPUFAULT:
|
|
AM_BFW(SYSCTRL, SHCSR, MEMFAULTENA, 1);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Disable an interrupt.
|
|
//!
|
|
//! @param ui32Interrupt The ISR number of the interrupt to be disabled.
|
|
//!
|
|
//! This function disables an interrupt signal to the NVIC based on the
|
|
//! provided ISR number.
|
|
//!
|
|
//! @return None
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_interrupt_disable(uint32_t ui32Interrupt)
|
|
{
|
|
//
|
|
// Check to see what type of interrupt this is.
|
|
//
|
|
if ( ui32Interrupt > 15 )
|
|
{
|
|
//
|
|
// If this ISR number corresponds to a "normal" peripheral interrupt,
|
|
// disable it using the NVIC register.
|
|
//
|
|
AM_REG(NVIC, ICER0) = 0x1 << ((ui32Interrupt - 16) & 0x1F);
|
|
}
|
|
else
|
|
{
|
|
//
|
|
// If this is an ARM internal interrupt number, route it to the
|
|
// appropriate enable register.
|
|
//
|
|
switch(ui32Interrupt)
|
|
{
|
|
case AM_HAL_INTERRUPT_BUSFAULT:
|
|
AM_BFW(SYSCTRL, SHCSR, BUSFAULTENA, 0);
|
|
break;
|
|
|
|
case AM_HAL_INTERRUPT_USAGEFAULT:
|
|
AM_BFW(SYSCTRL, SHCSR, USAGEFAULTENA, 0);
|
|
break;
|
|
|
|
case AM_HAL_INTERRUPT_MPUFAULT:
|
|
AM_BFW(SYSCTRL, SHCSR, MEMFAULTENA, 0);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Set the priority of an interrupt vector.
|
|
//!
|
|
//! @param ui32Interrupt is the ISR number of the interrupt to change.
|
|
//! @param ui32Priority is the new ISR priority value.
|
|
//!
|
|
//! This function changes the priority value in the NVIC for the given
|
|
//! interrupt vector number.
|
|
//!
|
|
//! @return None
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_interrupt_priority_set(uint32_t ui32Interrupt, uint32_t ui32Priority)
|
|
{
|
|
volatile uint32_t *pui32PriorityReg;
|
|
volatile uint32_t ui32OldPriority;
|
|
uint32_t ui32Shift;
|
|
|
|
//
|
|
// Find the correct priority register.
|
|
//
|
|
pui32PriorityReg = (volatile uint32_t *) AM_REG_NVIC_IPR0_O;
|
|
pui32PriorityReg += ((ui32Interrupt - 16) >> 2);
|
|
|
|
//
|
|
// Find the correct shift value.
|
|
//
|
|
ui32Shift = (((ui32Interrupt - 16) & 0x3) * 8);
|
|
|
|
//
|
|
// Mask out the old priority.
|
|
//
|
|
ui32OldPriority = *pui32PriorityReg;
|
|
ui32OldPriority &= ~(0xFF << ui32Shift);
|
|
|
|
//
|
|
// OR in the new priority.
|
|
//
|
|
*pui32PriorityReg = ui32OldPriority | (ui32Priority << ui32Shift);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Set a pending interrupt bit in the NVIC (Software Interrupt)
|
|
//!
|
|
//! @param ui32Interrupt is the ISR number of the interrupt to change.
|
|
//!
|
|
//! This function sets the specified bit in the Interrupt Set Pending (ISPR0)
|
|
//! register. For future MCUs there may be more than one ISPR.
|
|
//!
|
|
//! @return None
|
|
//
|
|
//*****************************************************************************
|
|
void am_hal_interrupt_pend_set(uint32_t ui32Interrupt)
|
|
{
|
|
//
|
|
// Check to see if the specified interrupt is valid for this MCU
|
|
//
|
|
if ( ui32Interrupt > AM_HAL_INTERRUPT_MAX )
|
|
{
|
|
return;
|
|
}
|
|
|
|
//
|
|
// Check to see what type of interrupt this is.
|
|
//
|
|
if ( ui32Interrupt > 15 )
|
|
{
|
|
//
|
|
// If this ISR number corresponds to a "normal" peripheral interrupt,
|
|
// disable it using the NVIC register.
|
|
//
|
|
AM_REG(NVIC, ISPR0) = 0x1 << ((ui32Interrupt - 16) & 0x1F);
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Clear a pending interrupt bit in the NVIC without servicing it
|
|
//!
|
|
//! @param ui32Interrupt is the ISR number of the interrupt to change.
|
|
//!
|
|
//! This function clears the specified bit in the Interrupt Clear Pending
|
|
//! (ICPR0) register. For future MCUs there may be more than one ICPR. This
|
|
//! function is useful immediately following a WFI before interrupts are
|
|
//! re-enabled.
|
|
//!
|
|
//! @return None
|
|
//
|
|
//*****************************************************************************
|
|
void am_hal_interrupt_pend_clear(uint32_t ui32Interrupt)
|
|
{
|
|
//
|
|
// Check to see if the specified interrupt is valid for this MCU
|
|
//
|
|
if ( ui32Interrupt > AM_HAL_INTERRUPT_MAX )
|
|
{
|
|
return;
|
|
}
|
|
|
|
//
|
|
// Check to see what type of interrupt this is.
|
|
//
|
|
if ( ui32Interrupt > 15 )
|
|
{
|
|
//
|
|
// If this ISR number corresponds to a "normal" peripheral interrupt,
|
|
// disable it using the NVIC register.
|
|
//
|
|
AM_REG(NVIC, ICPR0) = 0x1 << ((ui32Interrupt - 16) & 0x1F);
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Globally enable interrupt service routines
|
|
//!
|
|
//! This function allows interrupt signals from the NVIC to trigger ISR entry
|
|
//! in the CPU. This function must be called if interrupts are to be serviced
|
|
//! in software.
|
|
//!
|
|
//! @return 1 if interrupts were previously disabled, 0 otherwise.
|
|
//
|
|
//*****************************************************************************
|
|
#if defined(__GNUC_STDC_INLINE__)
|
|
uint32_t __attribute__((naked))
|
|
am_hal_interrupt_master_enable(void)
|
|
{
|
|
__asm(" mrs r0, PRIMASK");
|
|
__asm(" cpsie i");
|
|
__asm(" bx lr");
|
|
}
|
|
#elif defined(__ARMCC_VERSION)
|
|
__asm uint32_t
|
|
am_hal_interrupt_master_enable(void)
|
|
{
|
|
mrs r0, PRIMASK
|
|
cpsie i
|
|
bx lr
|
|
}
|
|
#elif defined(__IAR_SYSTEMS_ICC__)
|
|
#pragma diag_suppress = Pe940 // Suppress IAR compiler warning about missing
|
|
// return statement on a non-void function
|
|
__stackless uint32_t
|
|
am_hal_interrupt_master_enable(void)
|
|
{
|
|
__asm(" mrs r0, PRIMASK");
|
|
__asm(" cpsie i");
|
|
__asm(" bx lr");
|
|
}
|
|
#pragma diag_default = Pe940 // Restore IAR compiler warning
|
|
#endif
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Globally disable interrupt service routines
|
|
//!
|
|
//! This function prevents interrupt signals from the NVIC from triggering ISR
|
|
//! entry in the CPU. This will effectively stop incoming interrupt sources
|
|
//! from triggering their corresponding ISRs.
|
|
//!
|
|
//! @note Any external interrupt signal that occurs while the master interrupt
|
|
//! disable is active will still reach the "pending" state in the NVIC, but it
|
|
//! will not be allowed to reach the "active" state or trigger the
|
|
//! corresponding ISR. Instead, these interrupts are essentially "queued" until
|
|
//! the next time the master interrupt enable instruction is executed. At that
|
|
//! time, the interrupt handlers will be executed in order of decreasing
|
|
//! priority.
|
|
//!
|
|
//! @return 1 if interrupts were previously disabled, 0 otherwise.
|
|
//
|
|
//*****************************************************************************
|
|
#if defined(__GNUC_STDC_INLINE__)
|
|
uint32_t __attribute__((naked))
|
|
am_hal_interrupt_master_disable(void)
|
|
{
|
|
__asm(" mrs r0, PRIMASK");
|
|
__asm(" cpsid i");
|
|
__asm(" bx lr");
|
|
}
|
|
#elif defined(__ARMCC_VERSION)
|
|
__asm uint32_t
|
|
am_hal_interrupt_master_disable(void)
|
|
{
|
|
mrs r0, PRIMASK
|
|
cpsid i
|
|
bx lr
|
|
}
|
|
#elif defined(__IAR_SYSTEMS_ICC__)
|
|
#pragma diag_suppress = Pe940 // Suppress IAR compiler warning about missing
|
|
// return statement on a non-void function
|
|
__stackless uint32_t
|
|
am_hal_interrupt_master_disable(void)
|
|
{
|
|
__asm(" mrs r0, PRIMASK");
|
|
__asm(" cpsid i");
|
|
__asm(" bx lr");
|
|
}
|
|
#pragma diag_default = Pe940 // Restore IAR compiler warning
|
|
#endif
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Sets the master interrupt state based on the input.
|
|
//!
|
|
//! @param ui32InterruptState - Desired PRIMASK value.
|
|
//!
|
|
//! This function directly writes the PRIMASK register in the ARM core. A value
|
|
//! of 1 will disable interrupts, while a value of zero will enable them.
|
|
//!
|
|
//! This function may be used along with am_hal_interrupt_master_disable() to
|
|
//! implement a nesting critical section. To do this, call
|
|
//! am_hal_interrupt_master_disable() to start the critical section, and save
|
|
//! its return value. To complete the critical section, call
|
|
//! am_hal_interrupt_master_set() using the saved return value as \e
|
|
//! ui32InterruptState. This will safely restore PRIMASK to the value it
|
|
//! contained just before the start of the critical section.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
#if defined(__GNUC_STDC_INLINE__)
|
|
void __attribute__((naked))
|
|
am_hal_interrupt_master_set(uint32_t ui32InterruptState)
|
|
{
|
|
__asm(" msr PRIMASK, r0");
|
|
__asm(" bx lr");
|
|
}
|
|
#elif defined(__ARMCC_VERSION)
|
|
__asm void
|
|
am_hal_interrupt_master_set(uint32_t ui32InterruptState)
|
|
{
|
|
msr PRIMASK, r0
|
|
bx lr
|
|
}
|
|
#elif defined(__IAR_SYSTEMS_ICC__)
|
|
#pragma diag_suppress = Pe940 // Suppress IAR compiler warning about missing
|
|
// return statement on a non-void function
|
|
__stackless void
|
|
am_hal_interrupt_master_set(uint32_t ui32InterruptState)
|
|
{
|
|
__asm(" msr PRIMASK, r0");
|
|
__asm(" bx lr");
|
|
}
|
|
#pragma diag_default = Pe940 // Restore IAR compiler warning
|
|
#endif
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// End Doxygen group.
|
|
//! @}
|
|
//
|
|
//*****************************************************************************
|