247 lines
6.9 KiB
C
247 lines
6.9 KiB
C
/*
|
|
* Copyright (c) 2006-2021, RT-Thread Development Team
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2019-07-23 tyustli first version
|
|
*/
|
|
|
|
#include <drv_usart.h>
|
|
|
|
#ifdef RT_USING_SERIAL
|
|
|
|
#if !defined(BSP_USING_UART0) && !defined(BSP_USING_UART1) && !defined(BSP_USING_UART2) \
|
|
&& !defined(BSP_USING_UART3) && !defined(BSP_USING_UART4) && !defined(BSP_USING_UART5)
|
|
#error "Please define at least one BSP_USING_UARTx"
|
|
/* this driver can be disabled at menuconfig -> RT-Thread Components -> Device Drivers */
|
|
#endif
|
|
|
|
struct gd32_usart {
|
|
char *name;
|
|
rt_uint32_t usart_base;
|
|
rt_uint32_t usart_clk;
|
|
rt_uint32_t gpio_clk;
|
|
rt_uint32_t gpio_port;
|
|
rt_uint32_t tx_pin;
|
|
rt_uint32_t rx_pin;
|
|
IRQn_Type irqn;
|
|
struct rt_serial_device serial;
|
|
};
|
|
|
|
enum {
|
|
#ifdef BSP_USING_UART0
|
|
GDUSART0_INDEX,
|
|
#endif
|
|
};
|
|
|
|
static struct gd32_usart usart_config[] = {
|
|
#ifdef BSP_USING_UART0
|
|
{ "uart0",
|
|
USART0,
|
|
RCU_USART0,
|
|
RCU_GPIOA,
|
|
GPIOA,
|
|
GPIO_PIN_9,
|
|
GPIO_PIN_10,
|
|
USART0_IRQn, },
|
|
#endif
|
|
};
|
|
|
|
static rt_err_t gd32_configure(struct rt_serial_device *serial,
|
|
struct serial_configure *cfg) {
|
|
struct gd32_usart *usart;
|
|
RT_ASSERT(serial != RT_NULL);
|
|
RT_ASSERT(cfg != RT_NULL);
|
|
|
|
usart = (struct gd32_usart *) serial->parent.user_data;
|
|
RT_ASSERT(usart != RT_NULL);
|
|
|
|
/* enable GPIO clock */
|
|
rcu_periph_clock_enable(usart->gpio_clk);
|
|
/* enable USART clock */
|
|
rcu_periph_clock_enable(usart->usart_clk);
|
|
/* connect port to USARTx_Tx */
|
|
gpio_init(usart->gpio_port, GPIO_MODE_AF_PP, GPIO_OSPEED_50MHZ,
|
|
usart->tx_pin);
|
|
/* connect port to USARTx_Rx */
|
|
gpio_init(usart->gpio_port, GPIO_MODE_IN_FLOATING, GPIO_OSPEED_50MHZ,
|
|
usart->rx_pin);
|
|
|
|
usart_deinit(usart->usart_base);
|
|
usart_baudrate_set(usart->usart_base, cfg->baud_rate);
|
|
|
|
switch (cfg->data_bits) {
|
|
case DATA_BITS_8:
|
|
usart_word_length_set(usart->usart_base, USART_WL_8BIT);
|
|
break;
|
|
|
|
case DATA_BITS_9:
|
|
usart_word_length_set(usart->usart_base, USART_WL_9BIT);
|
|
break;
|
|
default:
|
|
usart_word_length_set(usart->usart_base, USART_WL_8BIT);
|
|
break;
|
|
}
|
|
|
|
switch (cfg->stop_bits) {
|
|
case STOP_BITS_1:
|
|
usart_stop_bit_set(usart->usart_base, USART_STB_1BIT);
|
|
break;
|
|
case STOP_BITS_2:
|
|
usart_stop_bit_set(usart->usart_base, USART_STB_2BIT);
|
|
break;
|
|
default:
|
|
usart_stop_bit_set(usart->usart_base, USART_STB_1BIT);
|
|
break;
|
|
}
|
|
|
|
switch (cfg->parity) {
|
|
case PARITY_NONE:
|
|
usart_parity_config(usart->usart_base, USART_PM_NONE);
|
|
break;
|
|
case PARITY_ODD:
|
|
usart_parity_config(usart->usart_base, USART_PM_ODD);
|
|
break;
|
|
case PARITY_EVEN:
|
|
usart_parity_config(usart->usart_base, USART_PM_EVEN);
|
|
break;
|
|
default:
|
|
usart_parity_config(usart->usart_base, USART_PM_NONE);
|
|
break;
|
|
}
|
|
usart_hardware_flow_rts_config(usart->usart_base, USART_RTS_DISABLE);
|
|
usart_hardware_flow_cts_config(usart->usart_base, USART_RTS_DISABLE);
|
|
usart_receive_config(usart->usart_base, USART_RECEIVE_ENABLE);
|
|
usart_transmit_config(usart->usart_base, USART_TRANSMIT_ENABLE);
|
|
usart_enable(usart->usart_base);
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
static rt_err_t gd32_control(struct rt_serial_device *serial, int cmd,
|
|
void *arg) {
|
|
struct gd32_usart *usart;
|
|
|
|
RT_ASSERT(serial != RT_NULL);
|
|
usart = (struct gd32_usart *) serial->parent.user_data;
|
|
RT_ASSERT(usart != RT_NULL);
|
|
|
|
switch (cmd) {
|
|
case RT_DEVICE_CTRL_CLR_INT:
|
|
eclic_irq_disable(usart->usart_base);
|
|
usart_interrupt_disable(usart->usart_base, USART_INT_RBNE);
|
|
break;
|
|
case RT_DEVICE_CTRL_SET_INT:
|
|
// eclic_set_nlbits(3);
|
|
eclic_irq_enable(usart->irqn, 1, 0);
|
|
/* enable USART0 receive interrupt */
|
|
usart_interrupt_enable(usart->usart_base, USART_INT_RBNE);
|
|
break;
|
|
}
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
static int gd32_putc(struct rt_serial_device *serial, char ch) {
|
|
struct gd32_usart *usart;
|
|
|
|
RT_ASSERT(serial != RT_NULL);
|
|
usart = (struct gd32_usart *) serial->parent.user_data;
|
|
RT_ASSERT(usart != RT_NULL);
|
|
|
|
usart_data_transmit(usart->usart_base, (uint8_t) ch);
|
|
while (usart_flag_get(usart->usart_base, USART_FLAG_TBE) == RESET)
|
|
;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int gd32_getc(struct rt_serial_device *serial) {
|
|
int ch;
|
|
struct gd32_usart *usart;
|
|
|
|
RT_ASSERT(serial != RT_NULL);
|
|
usart = (struct gd32_usart *) serial->parent.user_data;
|
|
RT_ASSERT(usart != RT_NULL);
|
|
|
|
ch = -1;
|
|
if (RESET != usart_flag_get(usart->usart_base, USART_FLAG_RBNE)) {
|
|
ch = usart_data_receive(usart->usart_base) & 0xff;
|
|
}
|
|
|
|
return ch;
|
|
}
|
|
|
|
static const struct rt_uart_ops gd32_usart_ops = { gd32_configure, gd32_control,
|
|
gd32_putc, gd32_getc,
|
|
RT_NULL };
|
|
|
|
static void usart_isr(struct rt_serial_device *serial) {
|
|
struct gd32_usart *usart;
|
|
|
|
RT_ASSERT(serial != RT_NULL);
|
|
|
|
usart = (struct gd32_usart *) serial->parent.user_data;
|
|
RT_ASSERT(usart != RT_NULL);
|
|
|
|
if ((usart_interrupt_flag_get(usart->usart_base, USART_INT_FLAG_RBNE)
|
|
!= RESET)
|
|
&& (RESET != usart_flag_get(usart->usart_base, USART_FLAG_RBNE))) {
|
|
rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
|
|
usart_interrupt_flag_clear(usart->usart_base, USART_INT_FLAG_RBNE);
|
|
usart_flag_clear(usart->usart_base, USART_FLAG_RBNE);
|
|
} else {
|
|
if (usart_flag_get(usart->usart_base, USART_FLAG_CTSF) != RESET) {
|
|
usart_flag_clear(usart->usart_base, USART_FLAG_CTSF);
|
|
}
|
|
|
|
if (usart_flag_get(usart->usart_base, USART_FLAG_LBDF) != RESET) {
|
|
usart_flag_clear(usart->usart_base, USART_FLAG_LBDF);
|
|
}
|
|
|
|
if (usart_flag_get(usart->usart_base, USART_FLAG_TC) != RESET) {
|
|
usart_flag_clear(usart->usart_base, USART_FLAG_TC);
|
|
}
|
|
}
|
|
}
|
|
#ifdef BSP_USING_UART0
|
|
|
|
void USART0_IRQHandler(void) {
|
|
rt_interrupt_enter();
|
|
|
|
usart_isr(&usart_config[GDUSART0_INDEX].serial);
|
|
|
|
rt_interrupt_leave();
|
|
}
|
|
|
|
#endif
|
|
|
|
int rt_hw_usart_init(void) {
|
|
rt_size_t obj_num;
|
|
int index;
|
|
|
|
obj_num = sizeof(usart_config) / sizeof(struct gd32_usart);
|
|
struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
|
|
rt_err_t result = 0;
|
|
|
|
for (index = 0; index < obj_num; index++) {
|
|
usart_config[index].serial.ops = &gd32_usart_ops;
|
|
usart_config[index].serial.config = config;
|
|
|
|
/* register UART device */
|
|
result = rt_hw_serial_register(&usart_config[index].serial,
|
|
usart_config[index].name,
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX
|
|
| RT_DEVICE_FLAG_INT_TX, &usart_config[index]);
|
|
RT_ASSERT(result == RT_EOK);
|
|
}
|
|
|
|
return result;
|
|
}
|
|
|
|
#endif /* RT_USING_SERIAL */
|
|
|
|
/******************** end of file *******************/
|