rt-thread-official/bsp/nuvoton/libraries/m480/StdDriver/inc/nu_usci_uart.h

521 lines
19 KiB
C

/**************************************************************************//**
* @file nu_usci_uart.h
* @version V3.00
* @brief M480 series USCI UART (UUART) driver header file
*
* SPDX-License-Identifier: Apache-2.0
* @copyright (C) 2016-2020 Nuvoton Technology Corp. All rights reserved.
*****************************************************************************/
#ifndef __NU_USCI_UART_H__
#define __NU_USCI_UART_H__
#ifdef __cplusplus
extern "C"
{
#endif
/** @addtogroup Standard_Driver Standard Driver
@{
*/
/** @addtogroup USCI_UART_Driver USCI_UART Driver
@{
*/
/** @addtogroup USCI_UART_EXPORTED_CONSTANTS USCI_UART Exported Constants
@{
*/
/*---------------------------------------------------------------------------------------------------------*/
/* UUART_LINECTL constants definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define UUART_WORD_LEN_6 (6ul << UUART_LINECTL_DWIDTH_Pos) /*!< UUART_LINECTL setting to set UART word length to 6 bits \hideinitializer */
#define UUART_WORD_LEN_7 (7ul << UUART_LINECTL_DWIDTH_Pos) /*!< UUART_LINECTL setting to set UART word length to 7 bits \hideinitializer */
#define UUART_WORD_LEN_8 (8ul << UUART_LINECTL_DWIDTH_Pos) /*!< UUART_LINECTL setting to set UART word length to 8 bits \hideinitializer */
#define UUART_WORD_LEN_9 (9ul << UUART_LINECTL_DWIDTH_Pos) /*!< UUART_LINECTL setting to set UART word length to 9 bits \hideinitializer */
/*---------------------------------------------------------------------------------------------------------*/
/* UUART_PROTCTL constants definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define UUART_PARITY_NONE (0x0ul << UUART_PROTCTL_PARITYEN_Pos) /*!< UUART_PROTCTL setting to set UART as no parity \hideinitializer */
#define UUART_PARITY_ODD (0x1ul << UUART_PROTCTL_PARITYEN_Pos) /*!< UUART_PROTCTL setting to set UART as odd parity \hideinitializer */
#define UUART_PARITY_EVEN (0x3ul << UUART_PROTCTL_PARITYEN_Pos) /*!< UUART_PROTCTL setting to set UART as even parity \hideinitializer */
#define UUART_STOP_BIT_1 (0x0ul) /*!< UUART_PROTCTL setting for one stop bit \hideinitializer */
#define UUART_STOP_BIT_2 (0x1ul) /*!< UUART_PROTCTL setting for two stop bit \hideinitializer */
/*---------------------------------------------------------------------------------------------------------*/
/* USCI UART interrupt mask definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define UUART_ABR_INT_MASK (0x002ul) /*!< Auto-baud rate interrupt mask \hideinitializer */
#define UUART_RLS_INT_MASK (0x004ul) /*!< Receive line status interrupt mask \hideinitializer */
#define UUART_BUF_RXOV_INT_MASK (0x008ul) /*!< Buffer RX overrun interrupt mask \hideinitializer */
#define UUART_TXST_INT_MASK (0x010ul) /*!< TX start interrupt mask \hideinitializer */
#define UUART_TXEND_INT_MASK (0x020ul) /*!< Tx end interrupt mask \hideinitializer */
#define UUART_RXST_INT_MASK (0x040ul) /*!< RX start interrupt mask \hideinitializer */
#define UUART_RXEND_INT_MASK (0x080ul) /*!< RX end interrupt mask \hideinitializer */
/*@}*/ /* end of group USCI_UART_EXPORTED_CONSTANTS */
/** @addtogroup USCI_UART_EXPORTED_FUNCTIONS USCI_UART Exported Functions
@{
*/
/**
* @brief Write USCI_UART data
*
* @param[in] uuart The pointer of the specified USCI_UART module
* @param[in] u8Data Data byte to transmit.
*
* @return None
*
* @details This macro write Data to Tx data register.
* \hideinitializer
*/
#define UUART_WRITE(uuart, u8Data) ((uuart)->TXDAT = (u8Data))
/**
* @brief Read USCI_UART data
*
* @param[in] uuart The pointer of the specified USCI_UART module
*
* @return The oldest data byte in RX buffer.
*
* @details This macro read Rx data register.
* \hideinitializer
*/
#define UUART_READ(uuart) ((uuart)->RXDAT)
/**
* @brief Get Tx empty
*
* @param[in] uuart The pointer of the specified USCI_UART module
*
* @retval 0 Tx buffer is not empty
* @retval >=1 Tx buffer is empty
*
* @details This macro get Transmitter buffer empty register value.
* \hideinitializer
*/
#define UUART_GET_TX_EMPTY(uuart) ((uuart)->BUFSTS & UUART_BUFSTS_TXEMPTY_Msk)
/**
* @brief Get Rx empty
*
* @param[in] uuart The pointer of the specified USCI_UART module
*
* @retval 0 Rx buffer is not empty
* @retval >=1 Rx buffer is empty
*
* @details This macro get Receiver buffer empty register value.
* \hideinitializer
*/
#define UUART_GET_RX_EMPTY(uuart) ((uuart)->BUFSTS & UUART_BUFSTS_RXEMPTY_Msk)
/**
* @brief Check specified usci_uart port transmission is over.
*
* @param[in] uuart The pointer of the specified USCI_UART module
*
* @retval 0 Tx transmission is not over
* @retval 1 Tx transmission is over
*
* @details This macro return Transmitter Empty Flag register bit value. \n
* It indicates if specified usci_uart port transmission is over nor not.
* \hideinitializer
*/
#define UUART_IS_TX_EMPTY(uuart) (((uuart)->BUFSTS & UUART_BUFSTS_TXEMPTY_Msk) >> UUART_BUFSTS_TXEMPTY_Pos)
/**
* @brief Check specified usci_uart port receiver is empty.
*
* @param[in] uuart The pointer of the specified USCI_UART module
*
* @retval 0 Rx receiver is not empty
* @retval 1 Rx receiver is empty
*
* @details This macro return Receive Empty Flag register bit value. \n
* It indicates if specified usci_uart port receiver is empty nor not.
* \hideinitializer
*/
#define UUART_IS_RX_EMPTY(uuart) (((uuart)->BUFSTS & UUART_BUFSTS_RXEMPTY_Msk) >> UUART_BUFSTS_RXEMPTY_Pos)
/**
* @brief Wait specified usci_uart port transmission is over
*
* @param[in] uuart The pointer of the specified USCI_UART module
*
* @return None
*
* @details This macro wait specified usci_uart port transmission is over.
* \hideinitializer
*/
#define UUART_WAIT_TX_EMPTY(uuart) while(!((((uuart)->BUFSTS) & UUART_BUFSTS_TXEMPTY_Msk) >> UUART_BUFSTS_TXEMPTY_Pos))
/**
* @brief Check TX buffer is full or not
*
* @param[in] uuart The pointer of the specified USCI_UART module
*
* @retval 1 TX buffer is full
* @retval 0 TX buffer is not full
*
* @details This macro check TX buffer is full or not.
* \hideinitializer
*/
#define UUART_IS_TX_FULL(uuart) (((uuart)->BUFSTS & UUART_BUFSTS_TXFULL_Msk)>>UUART_BUFSTS_TXFULL_Pos)
/**
* @brief Check RX buffer is full or not
*
* @param[in] uuart The pointer of the specified USCI_UART module
*
* @retval 1 RX buffer is full
* @retval 0 RX buffer is not full
*
* @details This macro check RX buffer is full or not.
* \hideinitializer
*/
#define UUART_IS_RX_FULL(uuart) (((uuart)->BUFSTS & UUART_BUFSTS_RXFULL_Msk)>>UUART_BUFSTS_RXFULL_Pos)
/**
* @brief Get Tx full register value
*
* @param[in] uuart The pointer of the specified USCI_UART module
*
* @retval 0 Tx buffer is not full.
* @retval >=1 Tx buffer is full.
*
* @details This macro get Tx full register value.
* \hideinitializer
*/
#define UUART_GET_TX_FULL(uuart) ((uuart)->BUFSTS & UUART_BUFSTS_TXFULL_Msk)
/**
* @brief Get Rx full register value
*
* @param[in] uuart The pointer of the specified USCI_UART module
*
* @retval 0 Rx buffer is not full.
* @retval >=1 Rx buffer is full.
*
* @details This macro get Rx full register value.
* \hideinitializer
*/
#define UUART_GET_RX_FULL(uuart) ((uuart)->BUFSTS & UUART_BUFSTS_RXFULL_Msk)
/**
* @brief Enable specified USCI_UART protocol interrupt
*
* @param[in] uuart The pointer of the specified USCI_UART module
* @param[in] u32IntSel Interrupt type select
* - \ref UUART_PROTIEN_RLSIEN_Msk : Rx Line status interrupt
* - \ref UUART_PROTIEN_ABRIEN_Msk : Auto-baud rate interrupt
*
* @return None
*
* @details This macro enable specified USCI_UART protocol interrupt.
* \hideinitializer
*/
#define UUART_ENABLE_PROT_INT(uuart, u32IntSel) ((uuart)->PROTIEN |= (u32IntSel))
/**
* @brief Disable specified USCI_UART protocol interrupt
*
* @param[in] uuart The pointer of the specified USCI_UART module
* @param[in] u32IntSel Interrupt type select
* - \ref UUART_PROTIEN_RLSIEN_Msk : Rx Line status interrupt
* - \ref UUART_PROTIEN_ABRIEN_Msk : Auto-baud rate interrupt
*
* @return None
*
* @details This macro disable specified USCI_UART protocol interrupt.
* \hideinitializer
*/
#define UUART_DISABLE_PROT_INT(uuart, u32IntSel) ((uuart)->PROTIEN &= ~(u32IntSel))
/**
* @brief Enable specified USCI_UART buffer interrupt
*
* @param[in] uuart The pointer of the specified USCI_UART module
* @param[in] u32IntSel Interrupt type select
* - \ref UUART_BUFCTL_RXOVIEN_Msk : Receive buffer overrun error interrupt
*
* @return None
*
* @details This macro enable specified USCI_UART buffer interrupt.
* \hideinitializer
*/
#define UUART_ENABLE_BUF_INT(uuart, u32IntSel) ((uuart)->BUFCTL |= (u32IntSel))
/**
* @brief Disable specified USCI_UART buffer interrupt
*
* @param[in] uuart The pointer of the specified USCI_UART module
* @param[in] u32IntSel Interrupt type select
* - \ref UUART_BUFCTL_RXOVIEN_Msk : Receive buffer overrun error interrupt
*
* @return None
*
* @details This macro disable specified USCI_UART buffer interrupt.
* \hideinitializer
*/
#define UUART_DISABLE_BUF_INT(uuart, u32IntSel) ((uuart)->BUFCTL &= ~ (u32IntSel))
/**
* @brief Enable specified USCI_UART transfer interrupt
*
* @param[in] uuart The pointer of the specified USCI_UART module
* @param[in] u32IntSel Interrupt type select
* - \ref UUART_INTEN_RXENDIEN_Msk : Receive end interrupt
* - \ref UUART_INTEN_RXSTIEN_Msk : Receive start interrupt
* - \ref UUART_INTEN_TXENDIEN_Msk : Transmit end interrupt
* - \ref UUART_INTEN_TXSTIEN_Msk : Transmit start interrupt
*
* @return None
*
* @details This macro enable specified USCI_UART transfer interrupt.
* \hideinitializer
*/
#define UUART_ENABLE_TRANS_INT(uuart, u32IntSel) ((uuart)->INTEN |= (u32IntSel))
/**
* @brief Disable specified USCI_UART transfer interrupt
*
* @param[in] uuart The pointer of the specified USCI_UART module
* @param[in] u32IntSel Interrupt type select
* - \ref UUART_INTEN_RXENDIEN_Msk : Receive end interrupt
* - \ref UUART_INTEN_RXSTIEN_Msk : Receive start interrupt
* - \ref UUART_INTEN_TXENDIEN_Msk : Transmit end interrupt
* - \ref UUART_INTEN_TXSTIEN_Msk : Transmit start interrupt
*
* @return None
*
* @details This macro disable specified USCI_UART transfer interrupt.
* \hideinitializer
*/
#define UUART_DISABLE_TRANS_INT(uuart, u32IntSel) ((uuart)->INTEN &= ~(u32IntSel))
/**
* @brief Get protocol interrupt flag/status
*
* @param[in] uuart The pointer of the specified USCI_UART module
*
* @return The interrupt flag/status of protocol status register.
*
* @details This macro get protocol status register value.
* \hideinitializer
*/
#define UUART_GET_PROT_STATUS(uuart) ((uuart)->PROTSTS)
/**
* @brief Clear specified protocol interrupt flag
*
* @param[in] uuart The pointer of the specified USCI_UART module
* @param[in] u32IntTypeFlag Interrupt Type Flag, should be
* - \ref UUART_PROTSTS_ABERRSTS_Msk : Auto-baud Rate Error Interrupt Indicator
* - \ref UUART_PROTSTS_ABRDETIF_Msk : Auto-baud Rate Detected Interrupt Flag
* - \ref UUART_PROTSTS_BREAK_Msk : Break Flag
* - \ref UUART_PROTSTS_FRMERR_Msk : Framing Error Flag
* - \ref UUART_PROTSTS_PARITYERR_Msk : Parity Error Flag
* - \ref UUART_PROTSTS_RXENDIF_Msk : Receive End Interrupt Flag
* - \ref UUART_PROTSTS_RXSTIF_Msk : Receive Start Interrupt Flag
* - \ref UUART_PROTSTS_TXENDIF_Msk : Transmit End Interrupt Flag
* - \ref UUART_PROTSTS_TXSTIF_Msk : Transmit Start Interrupt Flag
*
* @return None
*
* @details This macro clear specified protocol interrupt flag.
* \hideinitializer
*/
#define UUART_CLR_PROT_INT_FLAG(uuart,u32IntTypeFlag) ((uuart)->PROTSTS = (u32IntTypeFlag))
/**
* @brief Get transmit/receive buffer interrupt flag/status
*
* @param[in] uuart The pointer of the specified USCI_UART module
*
* @return The interrupt flag/status of buffer status register.
*
* @details This macro get buffer status register value.
* \hideinitializer
*/
#define UUART_GET_BUF_STATUS(uuart) ((uuart)->BUFSTS)
/**
* @brief Clear specified buffer interrupt flag
*
* @param[in] uuart The pointer of the specified USCI_UART module
* @param[in] u32IntTypeFlag Interrupt Type Flag, should be
* - \ref UUART_BUFSTS_RXOVIF_Msk : Receive Buffer Over-run Error Interrupt Indicator
*
* @return None
*
* @details This macro clear specified buffer interrupt flag.
* \hideinitializer
*/
#define UUART_CLR_BUF_INT_FLAG(uuart,u32IntTypeFlag) ((uuart)->BUFSTS = (u32IntTypeFlag))
/**
* @brief Get wakeup flag
*
* @param[in] uuart The pointer of the specified USCI_UART module
*
* @retval 0 Chip did not wake up from power-down mode.
* @retval 1 Chip waked up from power-down mode.
*
* @details This macro get wakeup flag.
* \hideinitializer
*/
#define UUART_GET_WAKEUP_FLAG(uuart) ((uuart)->WKSTS & UUART_WKSTS_WKF_Msk ? 1: 0 )
/**
* @brief Clear wakeup flag
*
* @param[in] uuart The pointer of the specified USCI_UART module
*
* @return None
*
* @details This macro clear wakeup flag.
* \hideinitializer
*/
#define UUART_CLR_WAKEUP_FLAG(uuart) ((uuart)->WKSTS = UUART_WKSTS_WKF_Msk)
/**
* @brief Trigger RX PDMA function.
*
* @param[in] uuart The pointer of the specified USCI_UART module.
*
* @return None.
*
* @details Set RXPDMAEN bit of UUART_PDMACTL register to enable RX PDMA transfer function.
* \hideinitializer
*/
#define UUART_TRIGGER_RX_PDMA(uuart) ((uuart)->PDMACTL |= UUART_PDMACTL_RXPDMAEN_Msk|UUART_PDMACTL_PDMAEN_Msk)
/**
* @brief Trigger TX PDMA function.
*
* @param[in] uuart The pointer of the specified USCI_UART module.
*
* @return None.
*
* @details Set TXPDMAEN bit of UUART_PDMACTL register to enable TX PDMA transfer function.
* \hideinitializer
*/
#define UUART_TRIGGER_TX_PDMA(uuart) ((uuart)->PDMACTL |= UUART_PDMACTL_TXPDMAEN_Msk|UUART_PDMACTL_PDMAEN_Msk)
/**
* @brief Disable RX PDMA transfer.
*
* @param[in] uuart The pointer of the specified USCI_UART module.
*
* @return None.
*
* @details Clear RXPDMAEN bit of UUART_PDMACTL register to disable RX PDMA transfer function.
* \hideinitializer
*/
#define UUART_DISABLE_RX_PDMA(uuart) ( (uuart)->PDMACTL &= ~UUART_PDMACTL_RXPDMAEN_Msk )
/**
* @brief Disable TX PDMA transfer.
*
* @param[in] uuart The pointer of the specified USCI_UART module.
*
* @return None.
*
* @details Clear TXPDMAEN bit of UUART_PDMACTL register to disable TX PDMA transfer function.
* \hideinitializer
*/
#define UUART_DISABLE_TX_PDMA(uuart) ( (uuart)->PDMACTL &= ~UUART_PDMACTL_TXPDMAEN_Msk )
/**
* @brief Enable specified USCI_UART PDMA function
*
* @param[in] uuart The pointer of the specified USCI_UART module
* @param[in] u32FuncSel Combination of following functions
* - \ref UUART_PDMACTL_TXPDMAEN_Msk
* - \ref UUART_PDMACTL_RXPDMAEN_Msk
* - \ref UUART_PDMACTL_PDMAEN_Msk
*
* @return None
*
* \hideinitializer
*/
#define UUART_PDMA_ENABLE(uuart, u32FuncSel) ((uuart)->PDMACTL |= (u32FuncSel))
/**
* @brief Disable specified USCI_UART PDMA function
*
* @param[in] uuart The pointer of the specified USCI_UART module
* @param[in] u32FuncSel Combination of following functions
* - \ref UUART_PDMACTL_TXPDMAEN_Msk
* - \ref UUART_PDMACTL_RXPDMAEN_Msk
* - \ref UUART_PDMACTL_PDMAEN_Msk
*
* @return None
*
* \hideinitializer
*/
#define UUART_PDMA_DISABLE(uuart, u32FuncSel) ((uuart)->PDMACTL &= ~(u32FuncSel))
void UUART_ClearIntFlag(UUART_T* uuart, uint32_t u32Mask);
uint32_t UUART_GetIntFlag(UUART_T* uuart, uint32_t u32Mask);
void UUART_Close(UUART_T* uuart);
void UUART_DisableInt(UUART_T* uuart, uint32_t u32Mask);
void UUART_EnableInt(UUART_T* uuart, uint32_t u32Mask);
uint32_t UUART_Open(UUART_T* uuart, uint32_t u32baudrate);
uint32_t UUART_Read(UUART_T* uuart, uint8_t pu8RxBuf[], uint32_t u32ReadBytes);
uint32_t UUART_SetLine_Config(UUART_T* uuart, uint32_t u32baudrate, uint32_t u32data_width, uint32_t u32parity, uint32_t u32stop_bits);
uint32_t UUART_Write(UUART_T* uuart, uint8_t pu8TxBuf[], uint32_t u32WriteBytes);
void UUART_EnableWakeup(UUART_T* uuart, uint32_t u32WakeupMode);
void UUART_DisableWakeup(UUART_T* uuart);
void UUART_EnableFlowCtrl(UUART_T* uuart);
void UUART_DisableFlowCtrl(UUART_T* uuart);
/*@}*/ /* end of group USCI_UART_EXPORTED_FUNCTIONS */
/*@}*/ /* end of group USCI_UART_Driver */
/*@}*/ /* end of group Standard_Driver */
#ifdef __cplusplus
}
#endif
#endif /* __NU_USCI_UART_H__ */
/*** (C) COPYRIGHT 2016 Nuvoton Technology Corp. ***/