524 lines
19 KiB
C
524 lines
19 KiB
C
/**************************************************************************//**
|
|
* @file nu_timer.h
|
|
* @version V1.00
|
|
* @brief M480 series Timer Controller(Timer) driver header file
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
* @copyright (C) 2016-2020 Nuvoton Technology Corp. All rights reserved.
|
|
*****************************************************************************/
|
|
#ifndef __NU_TIMER_H__
|
|
#define __NU_TIMER_H__
|
|
|
|
#ifdef __cplusplus
|
|
extern "C"
|
|
{
|
|
#endif
|
|
|
|
|
|
/** @addtogroup Standard_Driver Standard Driver
|
|
@{
|
|
*/
|
|
|
|
/** @addtogroup TIMER_Driver TIMER Driver
|
|
@{
|
|
*/
|
|
|
|
/** @addtogroup TIMER_EXPORTED_CONSTANTS TIMER Exported Constants
|
|
@{
|
|
*/
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
/* TIMER Operation Mode, External Counter and Capture Mode Constant Definitions */
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
#define TIMER_ONESHOT_MODE (0UL << TIMER_CTL_OPMODE_Pos) /*!< Timer working in one-shot mode \hideinitializer */
|
|
#define TIMER_PERIODIC_MODE (1UL << TIMER_CTL_OPMODE_Pos) /*!< Timer working in periodic mode \hideinitializer */
|
|
#define TIMER_TOGGLE_MODE (2UL << TIMER_CTL_OPMODE_Pos) /*!< Timer working in toggle-output mode \hideinitializer */
|
|
#define TIMER_CONTINUOUS_MODE (3UL << TIMER_CTL_OPMODE_Pos) /*!< Timer working in continuous counting mode \hideinitializer */
|
|
#define TIMER_TOUT_PIN_FROM_TMX (0UL << TIMER_CTL_TGLPINSEL_Pos) /*!< Timer toggle-output pin is from TMx pin \hideinitializer */
|
|
#define TIMER_TOUT_PIN_FROM_TMX_EXT (1UL << TIMER_CTL_TGLPINSEL_Pos) /*!< Timer toggle-output pin is from TMx_EXT pin \hideinitializer */
|
|
|
|
#define TIMER_COUNTER_EVENT_FALLING (0UL << TIMER_EXTCTL_CNTPHASE_Pos) /*!< Counter increase on falling edge detection \hideinitializer */
|
|
#define TIMER_COUNTER_EVENT_RISING (1UL << TIMER_EXTCTL_CNTPHASE_Pos) /*!< Counter increase on rising edge detection \hideinitializer */
|
|
#define TIMER_CAPTURE_FREE_COUNTING_MODE (0UL << TIMER_EXTCTL_CAPFUNCS_Pos) /*!< Timer capture event to get timer counter value \hideinitializer */
|
|
#define TIMER_CAPTURE_COUNTER_RESET_MODE (1UL << TIMER_EXTCTL_CAPFUNCS_Pos) /*!< Timer capture event to reset timer counter \hideinitializer */
|
|
|
|
#define TIMER_CAPTURE_EVENT_FALLING (0UL << TIMER_EXTCTL_CAPEDGE_Pos) /*!< Falling edge detection to trigger capture event \hideinitializer */
|
|
#define TIMER_CAPTURE_EVENT_RISING (1UL << TIMER_EXTCTL_CAPEDGE_Pos) /*!< Rising edge detection to trigger capture event \hideinitializer */
|
|
#define TIMER_CAPTURE_EVENT_FALLING_RISING (2UL << TIMER_EXTCTL_CAPEDGE_Pos) /*!< Both falling and rising edge detection to trigger capture event, and first event at falling edge \hideinitializer */
|
|
#define TIMER_CAPTURE_EVENT_RISING_FALLING (3UL << TIMER_EXTCTL_CAPEDGE_Pos) /*!< Both rising and falling edge detection to trigger capture event, and first event at rising edge \hideinitializer */
|
|
#define TIMER_CAPTURE_EVENT_GET_LOW_PERIOD (6UL << TIMER_EXTCTL_CAPEDGE_Pos) /*!< First capture event is at falling edge, follows are at at rising edge \hideinitializer */
|
|
#define TIMER_CAPTURE_EVENT_GET_HIGH_PERIOD (7UL << TIMER_EXTCTL_CAPEDGE_Pos) /*!< First capture event is at rising edge, follows are at at falling edge \hideinitializer */
|
|
|
|
#define TIMER_TRGSRC_TIMEOUT_EVENT (0UL << TIMER_TRGCTL_TRGSSEL_Pos) /*!< Select internal trigger source from timer time-out event \hideinitializer */
|
|
#define TIMER_TRGSRC_CAPTURE_EVENT (1UL << TIMER_TRGCTL_TRGSSEL_Pos) /*!< Select internal trigger source from timer capture event \hideinitializer */
|
|
#define TIMER_TRG_TO_EPWM (TIMER_TRGCTL_TRGEPWM_Msk) /*!< Each timer event as EPWM counter clock source \hideinitializer */
|
|
#define TIMER_TRG_TO_EADC (TIMER_TRGCTL_TRGEADC_Msk) /*!< Each timer event to start ADC conversion \hideinitializer */
|
|
#define TIMER_TRG_TO_DAC (TIMER_TRGCTL_TRGDAC_Msk) /*!< Each timer event to start DAC conversion \hideinitializer */
|
|
#define TIMER_TRG_TO_PDMA (TIMER_TRGCTL_TRGPDMA_Msk) /*!< Each timer event to trigger PDMA transfer \hideinitializer */
|
|
|
|
/*@}*/ /* end of group TIMER_EXPORTED_CONSTANTS */
|
|
|
|
|
|
/** @addtogroup TIMER_EXPORTED_FUNCTIONS TIMER Exported Functions
|
|
@{
|
|
*/
|
|
|
|
/**
|
|
* @brief Set Timer Compared Value
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
* @param[in] u32Value Timer compare value. Valid values are between 2 to 0xFFFFFF.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro is used to set timer compared value to adjust timer time-out interval.
|
|
* @note 1. Never write 0x0 or 0x1 in this field, or the core will run into unknown state. \n
|
|
* 2. If update timer compared value in continuous counting mode, timer counter value will keep counting continuously. \n
|
|
* But if timer is operating at other modes, the timer up counter will restart counting and start from 0.
|
|
* \hideinitializer
|
|
*/
|
|
#define TIMER_SET_CMP_VALUE(timer, u32Value) ((timer)->CMP = (u32Value))
|
|
|
|
/**
|
|
* @brief Set Timer Prescale Value
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
* @param[in] u32Value Timer prescale value. Valid values are between 0 to 0xFF.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro is used to set timer prescale value and timer source clock will be divided by (prescale + 1) \n
|
|
* before it is fed into timer.
|
|
* \hideinitializer
|
|
*/
|
|
#define TIMER_SET_PRESCALE_VALUE(timer, u32Value) ((timer)->CTL = ((timer)->CTL & ~TIMER_CTL_PSC_Msk) | (u32Value))
|
|
|
|
/**
|
|
* @brief Check specify Timer Status
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @retval 0 Timer 24-bit up counter is inactive
|
|
* @retval 1 Timer 24-bit up counter is active
|
|
*
|
|
* @details This macro is used to check if specify Timer counter is inactive or active.
|
|
* \hideinitializer
|
|
*/
|
|
#define TIMER_IS_ACTIVE(timer) (((timer)->CTL & TIMER_CTL_ACTSTS_Msk)? 1 : 0)
|
|
|
|
/**
|
|
* @brief Select Toggle-output Pin
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
* @param[in] u32ToutSel Toggle-output pin selection, valid values are:
|
|
* - \ref TIMER_TOUT_PIN_FROM_TMX
|
|
* - \ref TIMER_TOUT_PIN_FROM_TMX_EXT
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro is used to select timer toggle-output pin is output on TMx or TMx_EXT pin.
|
|
* \hideinitializer
|
|
*/
|
|
#define TIMER_SELECT_TOUT_PIN(timer, u32ToutSel) ((timer)->CTL = ((timer)->CTL & ~TIMER_CTL_TGLPINSEL_Msk) | (u32ToutSel))
|
|
|
|
/**
|
|
* @brief Select Timer operating mode
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
* @param[in] u32OpMode Operation mode. Possible options are
|
|
* - \ref TIMER_ONESHOT_MODE
|
|
* - \ref TIMER_PERIODIC_MODE
|
|
* - \ref TIMER_TOGGLE_MODE
|
|
* - \ref TIMER_CONTINUOUS_MODE
|
|
*
|
|
* @return None
|
|
* \hideinitializer
|
|
*/
|
|
#define TIMER_SET_OPMODE(timer, u32OpMode) ((timer)->CTL = ((timer)->CTL & ~TIMER_CTL_OPMODE_Msk) | (u32OpMode))
|
|
|
|
/* Declare these inline functions here to avoid MISRA C 2004 rule 8.1 error */
|
|
__STATIC_INLINE void TIMER_Start(TIMER_T *timer);
|
|
__STATIC_INLINE void TIMER_Stop(TIMER_T *timer);
|
|
__STATIC_INLINE void TIMER_EnableWakeup(TIMER_T *timer);
|
|
__STATIC_INLINE void TIMER_DisableWakeup(TIMER_T *timer);
|
|
__STATIC_INLINE void TIMER_StartCapture(TIMER_T *timer);
|
|
__STATIC_INLINE void TIMER_StopCapture(TIMER_T *timer);
|
|
__STATIC_INLINE void TIMER_EnableCaptureDebounce(TIMER_T *timer);
|
|
__STATIC_INLINE void TIMER_DisableCaptureDebounce(TIMER_T *timer);
|
|
__STATIC_INLINE void TIMER_EnableEventCounterDebounce(TIMER_T *timer);
|
|
__STATIC_INLINE void TIMER_DisableEventCounterDebounce(TIMER_T *timer);
|
|
__STATIC_INLINE void TIMER_EnableInt(TIMER_T *timer);
|
|
__STATIC_INLINE void TIMER_DisableInt(TIMER_T *timer);
|
|
__STATIC_INLINE void TIMER_EnableCaptureInt(TIMER_T *timer);
|
|
__STATIC_INLINE void TIMER_DisableCaptureInt(TIMER_T *timer);
|
|
__STATIC_INLINE uint32_t TIMER_GetIntFlag(TIMER_T *timer);
|
|
__STATIC_INLINE void TIMER_ClearIntFlag(TIMER_T *timer);
|
|
__STATIC_INLINE uint32_t TIMER_GetCaptureIntFlag(TIMER_T *timer);
|
|
__STATIC_INLINE void TIMER_ClearCaptureIntFlag(TIMER_T *timer);
|
|
__STATIC_INLINE uint32_t TIMER_GetWakeupFlag(TIMER_T *timer);
|
|
__STATIC_INLINE void TIMER_ClearWakeupFlag(TIMER_T *timer);
|
|
__STATIC_INLINE uint32_t TIMER_GetCaptureData(TIMER_T *timer);
|
|
__STATIC_INLINE uint32_t TIMER_GetCounter(TIMER_T *timer);
|
|
__STATIC_INLINE void TIMER_ResetCounter(TIMER_T *timer);
|
|
|
|
/**
|
|
* @brief Start Timer Counting
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This function is used to start Timer counting.
|
|
*/
|
|
__STATIC_INLINE void TIMER_Start(TIMER_T *timer)
|
|
{
|
|
timer->CTL |= TIMER_CTL_CNTEN_Msk;
|
|
}
|
|
|
|
/**
|
|
* @brief Stop Timer Counting
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This function is used to stop/suspend Timer counting.
|
|
*/
|
|
__STATIC_INLINE void TIMER_Stop(TIMER_T *timer)
|
|
{
|
|
timer->CTL &= ~TIMER_CTL_CNTEN_Msk;
|
|
}
|
|
|
|
/**
|
|
* @brief Enable Timer Interrupt Wake-up Function
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This function is used to enable the timer interrupt wake-up function and interrupt source could be time-out interrupt, \n
|
|
* counter event interrupt or capture trigger interrupt.
|
|
* @note To wake the system from Power-down mode, timer clock source must be ether LXT or LIRC.
|
|
*/
|
|
__STATIC_INLINE void TIMER_EnableWakeup(TIMER_T *timer)
|
|
{
|
|
timer->CTL |= TIMER_CTL_WKEN_Msk;
|
|
}
|
|
|
|
/**
|
|
* @brief Disable Timer Wake-up Function
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This function is used to disable the timer interrupt wake-up function.
|
|
*/
|
|
__STATIC_INLINE void TIMER_DisableWakeup(TIMER_T *timer)
|
|
{
|
|
timer->CTL &= ~TIMER_CTL_WKEN_Msk;
|
|
}
|
|
|
|
/**
|
|
* @brief Start Timer Capture Function
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This function is used to start Timer capture function.
|
|
*/
|
|
__STATIC_INLINE void TIMER_StartCapture(TIMER_T *timer)
|
|
{
|
|
timer->EXTCTL |= TIMER_EXTCTL_CAPEN_Msk;
|
|
}
|
|
|
|
/**
|
|
* @brief Stop Timer Capture Function
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This function is used to stop Timer capture function.
|
|
*/
|
|
__STATIC_INLINE void TIMER_StopCapture(TIMER_T *timer)
|
|
{
|
|
timer->EXTCTL &= ~TIMER_EXTCTL_CAPEN_Msk;
|
|
}
|
|
|
|
/**
|
|
* @brief Enable Capture Pin De-bounce
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This function is used to enable the detect de-bounce function of capture pin.
|
|
*/
|
|
__STATIC_INLINE void TIMER_EnableCaptureDebounce(TIMER_T *timer)
|
|
{
|
|
timer->EXTCTL |= TIMER_EXTCTL_CAPDBEN_Msk;
|
|
}
|
|
|
|
/**
|
|
* @brief Disable Capture Pin De-bounce
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This function is used to disable the detect de-bounce function of capture pin.
|
|
*/
|
|
__STATIC_INLINE void TIMER_DisableCaptureDebounce(TIMER_T *timer)
|
|
{
|
|
timer->EXTCTL &= ~TIMER_EXTCTL_CAPDBEN_Msk;
|
|
}
|
|
|
|
/**
|
|
* @brief Enable Counter Pin De-bounce
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This function is used to enable the detect de-bounce function of counter pin.
|
|
*/
|
|
__STATIC_INLINE void TIMER_EnableEventCounterDebounce(TIMER_T *timer)
|
|
{
|
|
timer->EXTCTL |= TIMER_EXTCTL_CNTDBEN_Msk;
|
|
}
|
|
|
|
/**
|
|
* @brief Disable Counter Pin De-bounce
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This function is used to disable the detect de-bounce function of counter pin.
|
|
*/
|
|
__STATIC_INLINE void TIMER_DisableEventCounterDebounce(TIMER_T *timer)
|
|
{
|
|
timer->EXTCTL &= ~TIMER_EXTCTL_CNTDBEN_Msk;
|
|
}
|
|
|
|
/**
|
|
* @brief Enable Timer Time-out Interrupt
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This function is used to enable the timer time-out interrupt function.
|
|
*/
|
|
__STATIC_INLINE void TIMER_EnableInt(TIMER_T *timer)
|
|
{
|
|
timer->CTL |= TIMER_CTL_INTEN_Msk;
|
|
}
|
|
|
|
/**
|
|
* @brief Disable Timer Time-out Interrupt
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This function is used to disable the timer time-out interrupt function.
|
|
*/
|
|
__STATIC_INLINE void TIMER_DisableInt(TIMER_T *timer)
|
|
{
|
|
timer->CTL &= ~TIMER_CTL_INTEN_Msk;
|
|
}
|
|
|
|
/**
|
|
* @brief Enable Capture Trigger Interrupt
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This function is used to enable the timer capture trigger interrupt function.
|
|
*/
|
|
__STATIC_INLINE void TIMER_EnableCaptureInt(TIMER_T *timer)
|
|
{
|
|
timer->EXTCTL |= TIMER_EXTCTL_CAPIEN_Msk;
|
|
}
|
|
|
|
/**
|
|
* @brief Disable Capture Trigger Interrupt
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This function is used to disable the timer capture trigger interrupt function.
|
|
*/
|
|
__STATIC_INLINE void TIMER_DisableCaptureInt(TIMER_T *timer)
|
|
{
|
|
timer->EXTCTL &= ~TIMER_EXTCTL_CAPIEN_Msk;
|
|
}
|
|
|
|
/**
|
|
* @brief Get Timer Time-out Interrupt Flag
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @retval 0 Timer time-out interrupt did not occur
|
|
* @retval 1 Timer time-out interrupt occurred
|
|
*
|
|
* @details This function indicates timer time-out interrupt occurred or not.
|
|
*/
|
|
__STATIC_INLINE uint32_t TIMER_GetIntFlag(TIMER_T *timer)
|
|
{
|
|
return ((timer->INTSTS & TIMER_INTSTS_TIF_Msk) ? 1UL : 0UL);
|
|
}
|
|
|
|
/**
|
|
* @brief Clear Timer Time-out Interrupt Flag
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This function clears timer time-out interrupt flag to 0.
|
|
*/
|
|
__STATIC_INLINE void TIMER_ClearIntFlag(TIMER_T *timer)
|
|
{
|
|
timer->INTSTS = TIMER_INTSTS_TIF_Msk;
|
|
}
|
|
|
|
/**
|
|
* @brief Get Timer Capture Interrupt Flag
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @retval 0 Timer capture interrupt did not occur
|
|
* @retval 1 Timer capture interrupt occurred
|
|
*
|
|
* @details This function indicates timer capture trigger interrupt occurred or not.
|
|
*/
|
|
__STATIC_INLINE uint32_t TIMER_GetCaptureIntFlag(TIMER_T *timer)
|
|
{
|
|
return timer->EINTSTS;
|
|
}
|
|
|
|
/**
|
|
* @brief Clear Timer Capture Interrupt Flag
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This function clears timer capture trigger interrupt flag to 0.
|
|
*/
|
|
__STATIC_INLINE void TIMER_ClearCaptureIntFlag(TIMER_T *timer)
|
|
{
|
|
timer->EINTSTS = TIMER_EINTSTS_CAPIF_Msk;
|
|
}
|
|
|
|
/**
|
|
* @brief Get Timer Wake-up Flag
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @retval 0 Timer does not cause CPU wake-up
|
|
* @retval 1 Timer interrupt event cause CPU wake-up
|
|
*
|
|
* @details This function indicates timer interrupt event has waked up system or not.
|
|
*/
|
|
__STATIC_INLINE uint32_t TIMER_GetWakeupFlag(TIMER_T *timer)
|
|
{
|
|
return (timer->INTSTS & TIMER_INTSTS_TWKF_Msk ? 1UL : 0UL);
|
|
}
|
|
|
|
/**
|
|
* @brief Clear Timer Wake-up Flag
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This function clears the timer wake-up system flag to 0.
|
|
*/
|
|
__STATIC_INLINE void TIMER_ClearWakeupFlag(TIMER_T *timer)
|
|
{
|
|
timer->INTSTS = TIMER_INTSTS_TWKF_Msk;
|
|
}
|
|
|
|
/**
|
|
* @brief Get Capture value
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @return 24-bit Capture Value
|
|
*
|
|
* @details This function reports the current 24-bit timer capture value.
|
|
*/
|
|
__STATIC_INLINE uint32_t TIMER_GetCaptureData(TIMER_T *timer)
|
|
{
|
|
return timer->CAP;
|
|
}
|
|
|
|
/**
|
|
* @brief Get Counter value
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @return 24-bit Counter Value
|
|
*
|
|
* @details This function reports the current 24-bit timer counter value.
|
|
*/
|
|
__STATIC_INLINE uint32_t TIMER_GetCounter(TIMER_T *timer)
|
|
{
|
|
return timer->CNT;
|
|
}
|
|
|
|
/**
|
|
* @brief Reset Counter
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This function is used to reset current counter value and internal prescale counter value.
|
|
*/
|
|
__STATIC_INLINE void TIMER_ResetCounter(TIMER_T *timer)
|
|
{
|
|
timer->CNT = 0UL;
|
|
while((timer->CNT&TIMER_CNT_RSTACT_Msk) == TIMER_CNT_RSTACT_Msk)
|
|
{
|
|
;
|
|
}
|
|
}
|
|
|
|
|
|
uint32_t TIMER_Open(TIMER_T *timer, uint32_t u32Mode, uint32_t u32Freq);
|
|
void TIMER_Close(TIMER_T *timer);
|
|
void TIMER_Delay(TIMER_T *timer, uint32_t u32Usec);
|
|
void TIMER_EnableCapture(TIMER_T *timer, uint32_t u32CapMode, uint32_t u32Edge);
|
|
void TIMER_DisableCapture(TIMER_T *timer);
|
|
void TIMER_EnableEventCounter(TIMER_T *timer, uint32_t u32Edge);
|
|
void TIMER_DisableEventCounter(TIMER_T *timer);
|
|
uint32_t TIMER_GetModuleClock(TIMER_T *timer);
|
|
void TIMER_EnableFreqCounter(TIMER_T *timer,
|
|
uint32_t u32DropCount,
|
|
uint32_t u32Timeout,
|
|
uint32_t u32EnableInt);
|
|
void TIMER_DisableFreqCounter(TIMER_T *timer);
|
|
void TIMER_SetTriggerSource(TIMER_T *timer, uint32_t u32Src);
|
|
void TIMER_SetTriggerTarget(TIMER_T *timer, uint32_t u32Mask);
|
|
|
|
/*@}*/ /* end of group TIMER_EXPORTED_FUNCTIONS */
|
|
|
|
/*@}*/ /* end of group TIMER_Driver */
|
|
|
|
/*@}*/ /* end of group Standard_Driver */
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __NU_TIMER_H__ */
|
|
|
|
|