rt-thread-official/bsp/nuvoton/libraries/m480/StdDriver/inc/nu_hsusbd.h

383 lines
15 KiB
C

/**************************************************************************//**
* @file nu_hsusbd.h
* @version V1.00
* @brief M480 HSUSBD driver header file
*
* SPDX-License-Identifier: Apache-2.0
* @copyright (C) 2016-2020 Nuvoton Technology Corp. All rights reserved.
*****************************************************************************/
#ifndef __NU_HSUSBD_H__
#define __NU_HSUSBD_H__
#ifdef __cplusplus
extern "C"
{
#endif
/** @addtogroup Standard_Driver Standard Driver
@{
*/
/** @addtogroup HSUSBD_Driver HSUSBD Driver
@{
*/
/** @addtogroup HSUSBD_EXPORTED_CONSTANTS HSUSBD Exported Constants
@{
*/
/** @cond HIDDEN_SYMBOLS */
#define HSUSBD_MAX_EP 12ul
#define Maximum(a,b) (a)>(b) ? (a) : (b)
#define Minimum(a,b) (((a)<(b)) ? (a) : (b))
#define CEP 0xfful /*!< Control Endpoint \hideinitializer */
#define EPA 0ul /*!< Endpoint A \hideinitializer */
#define EPB 1ul /*!< Endpoint B \hideinitializer */
#define EPC 2ul /*!< Endpoint C \hideinitializer */
#define EPD 3ul /*!< Endpoint D \hideinitializer */
#define EPE 4ul /*!< Endpoint E \hideinitializer */
#define EPF 5ul /*!< Endpoint F \hideinitializer */
#define EPG 6ul /*!< Endpoint G \hideinitializer */
#define EPH 7ul /*!< Endpoint H \hideinitializer */
#define EPI 8ul /*!< Endpoint I \hideinitializer */
#define EPJ 9ul /*!< Endpoint J \hideinitializer */
#define EPK 10ul /*!< Endpoint K \hideinitializer */
#define EPL 11ul /*!< Endpoint L \hideinitializer */
/** @endcond HIDDEN_SYMBOLS */
/********************* Bit definition of CEPCTL register **********************/
#define HSUSBD_CEPCTL_NAKCLR ((uint32_t)0x00000000ul) /*!<NAK clear \hideinitializer */
#define HSUSBD_CEPCTL_STALL ((uint32_t)0x00000002ul) /*!<Stall \hideinitializer */
#define HSUSBD_CEPCTL_ZEROLEN ((uint32_t)0x00000004ul) /*!<Zero length packet \hideinitializer */
#define HSUSBD_CEPCTL_FLUSH ((uint32_t)0x00000008ul) /*!<CEP flush \hideinitializer */
/********************* Bit definition of EPxRSPCTL register **********************/
#define HSUSBD_EP_RSPCTL_FLUSH ((uint32_t)0x00000001ul) /*!<Buffer Flush \hideinitializer */
#define HSUSBD_EP_RSPCTL_MODE_AUTO ((uint32_t)0x00000000ul) /*!<Auto-Validate Mode \hideinitializer */
#define HSUSBD_EP_RSPCTL_MODE_MANUAL ((uint32_t)0x00000002ul) /*!<Manual-Validate Mode \hideinitializer */
#define HSUSBD_EP_RSPCTL_MODE_FLY ((uint32_t)0x00000004ul) /*!<Fly Mode \hideinitializer */
#define HSUSBD_EP_RSPCTL_MODE_MASK ((uint32_t)0x00000006ul) /*!<Mode Mask \hideinitializer */
#define HSUSBD_EP_RSPCTL_TOGGLE ((uint32_t)0x00000008ul) /*!<Clear Toggle bit \hideinitializer */
#define HSUSBD_EP_RSPCTL_HALT ((uint32_t)0x00000010ul) /*!<Endpoint halt \hideinitializer */
#define HSUSBD_EP_RSPCTL_ZEROLEN ((uint32_t)0x00000020ul) /*!<Zero length packet IN \hideinitializer */
#define HSUSBD_EP_RSPCTL_SHORTTXEN ((uint32_t)0x00000040ul) /*!<Packet end \hideinitializer */
#define HSUSBD_EP_RSPCTL_DISBUF ((uint32_t)0x00000080ul) /*!<Disable buffer \hideinitializer */
/********************* Bit definition of EPxCFG register **********************/
#define HSUSBD_EP_CFG_VALID ((uint32_t)0x00000001ul) /*!<Endpoint Valid \hideinitializer */
#define HSUSBD_EP_CFG_TYPE_BULK ((uint32_t)0x00000002ul) /*!<Endpoint type - bulk \hideinitializer */
#define HSUSBD_EP_CFG_TYPE_INT ((uint32_t)0x00000004ul) /*!<Endpoint type - interrupt \hideinitializer */
#define HSUSBD_EP_CFG_TYPE_ISO ((uint32_t)0x00000006ul) /*!<Endpoint type - isochronous \hideinitializer */
#define HSUSBD_EP_CFG_TYPE_MASK ((uint32_t)0x00000006ul) /*!<Endpoint type mask \hideinitializer */
#define HSUSBD_EP_CFG_DIR_OUT ((uint32_t)0x00000000ul) /*!<OUT endpoint \hideinitializer */
#define HSUSBD_EP_CFG_DIR_IN ((uint32_t)0x00000008ul) /*!<IN endpoint \hideinitializer */
/*@}*/ /* end of group HSUSBD_EXPORTED_CONSTANTS */
/** @addtogroup HSUSBD_EXPORTED_STRUCT HSUSBD Exported Struct
@{
*/
typedef struct HSUSBD_CMD_STRUCT
{
uint8_t bmRequestType;
uint8_t bRequest;
uint16_t wValue;
uint16_t wIndex;
uint16_t wLength;
} S_HSUSBD_CMD_T; /*!<USB Setup Packet Structure */
typedef struct s_hsusbd_info
{
uint8_t *gu8DevDesc; /*!< Device descriptor */
uint8_t *gu8ConfigDesc; /*!< Config descriptor */
uint8_t **gu8StringDesc; /*!< Pointer for USB String Descriptor pointers */
uint8_t *gu8QualDesc; /*!< Qualifier descriptor */
uint8_t *gu8FullConfigDesc; /*!< Full Speed Config descriptor */
uint8_t *gu8HSOtherConfigDesc; /*!< Other Speed Config descriptor */
uint8_t *gu8FSOtherConfigDesc; /*!< Other Speed Config descriptor */
uint8_t **gu8HidReportDesc; /*!< Pointer for HID Report descriptor */
uint32_t *gu32HidReportSize; /*!< Pointer for HID Report descriptor Size */
uint32_t *gu32ConfigHidDescIdx; /*!< Pointer for HID Descriptor start index */
} S_HSUSBD_INFO_T; /*!<USB Information Structure */
/*@}*/ /* end of group HSUSBD_EXPORTED_STRUCT */
/** @cond HIDDEN_SYMBOLS */
extern uint32_t g_u32HsEpStallLock;
extern uint8_t volatile g_hsusbd_Configured;
extern uint8_t g_hsusbd_ShortPacket;
extern uint8_t g_hsusbd_CtrlZero;
extern uint8_t g_hsusbd_UsbAddr;
extern uint32_t volatile g_hsusbd_DmaDone;
extern uint32_t g_hsusbd_CtrlInSize;
extern S_HSUSBD_INFO_T gsHSInfo;
extern S_HSUSBD_CMD_T gUsbCmd;
/** @endcond HIDDEN_SYMBOLS */
/** @addtogroup HSUSBD_EXPORTED_FUNCTIONS HSUSBD Exported Functions
@{
*/
#define HSUSBD_ENABLE_USB() ((uint32_t)(HSUSBD->PHYCTL |= (HSUSBD_PHYCTL_PHYEN_Msk|HSUSBD_PHYCTL_DPPUEN_Msk))) /*!<Enable USB \hideinitializer */
#define HSUSBD_DISABLE_USB() ((uint32_t)(HSUSBD->PHYCTL &= ~HSUSBD_PHYCTL_DPPUEN_Msk)) /*!<Disable USB \hideinitializer */
#define HSUSBD_ENABLE_PHY() ((uint32_t)(HSUSBD->PHYCTL |= HSUSBD_PHYCTL_PHYEN_Msk)) /*!<Enable PHY \hideinitializer */
#define HSUSBD_DISABLE_PHY() ((uint32_t)(HSUSBD->PHYCTL &= ~HSUSBD_PHYCTL_PHYEN_Msk)) /*!<Disable PHY \hideinitializer */
#define HSUSBD_SET_SE0() ((uint32_t)(HSUSBD->PHYCTL &= ~HSUSBD_PHYCTL_DPPUEN_Msk)) /*!<Enable SE0, Force USB PHY Transceiver to Drive SE0 \hideinitializer */
#define HSUSBD_CLR_SE0() ((uint32_t)(HSUSBD->PHYCTL |= HSUSBD_PHYCTL_DPPUEN_Msk)) /*!<Disable SE0 \hideinitializer */
#define HSUSBD_SET_ADDR(addr) (HSUSBD->FADDR = (addr)) /*!<Set USB address \hideinitializer */
#define HSUSBD_GET_ADDR() ((uint32_t)(HSUSBD->FADDR)) /*!<Get USB address \hideinitializer */
#define HSUSBD_ENABLE_USB_INT(intr) (HSUSBD->GINTEN = (intr)) /*!<Enable USB Interrupt \hideinitializer */
#define HSUSBD_ENABLE_BUS_INT(intr) (HSUSBD->BUSINTEN = (intr)) /*!<Enable BUS Interrupt \hideinitializer */
#define HSUSBD_GET_BUS_INT_FLAG() (HSUSBD->BUSINTSTS) /*!<Get Bus interrupt flag \hideinitializer */
#define HSUSBD_CLR_BUS_INT_FLAG(flag) (HSUSBD->BUSINTSTS = (flag)) /*!<Clear Bus interrupt flag \hideinitializer */
#define HSUSBD_ENABLE_CEP_INT(intr) (HSUSBD->CEPINTEN = (intr)) /*!<Enable CEP Interrupt \hideinitializer */
#define HSUSBD_CLR_CEP_INT_FLAG(flag) (HSUSBD->CEPINTSTS = (flag)) /*!<Clear CEP interrupt flag \hideinitializer */
#define HSUSBD_SET_CEP_STATE(flag) (HSUSBD->CEPCTL = (flag)) /*!<Set CEP state \hideinitializer */
#define HSUSBD_START_CEP_IN(size) (HSUSBD->CEPTXCNT = (size)) /*!<Start CEP IN Transfer \hideinitializer */
#define HSUSBD_SET_MAX_PAYLOAD(ep, size) (HSUSBD->EP[(ep)].EPMPS = (size)) /*!<Set EPx Maximum Packet Size \hideinitializer */
#define HSUSBD_ENABLE_EP_INT(ep, intr) (HSUSBD->EP[(ep)].EPINTEN = (intr)) /*!<Enable EPx Interrupt \hideinitializer */
#define HSUSBD_GET_EP_INT_FLAG(ep) (HSUSBD->EP[(ep)].EPINTSTS) /*!<Get EPx interrupt flag \hideinitializer */
#define HSUSBD_CLR_EP_INT_FLAG(ep, flag) (HSUSBD->EP[(ep)].EPINTSTS = (flag)) /*!<Clear EPx interrupt flag \hideinitializer */
#define HSUSBD_SET_DMA_LEN(len) (HSUSBD->DMACNT = (len)) /*!<Set DMA transfer length \hideinitializer */
#define HSUSBD_SET_DMA_ADDR(addr) (HSUSBD->DMAADDR = (addr)) /*!<Set DMA transfer address \hideinitializer */
#define HSUSBD_SET_DMA_READ(epnum) (HSUSBD->DMACTL = (HSUSBD->DMACTL & ~HSUSBD_DMACTL_EPNUM_Msk) | HSUSBD_DMACTL_DMARD_Msk | (epnum) | 0x100) /*!<Set DMA transfer type to read \hideinitializer */
#define HSUSBD_SET_DMA_WRITE(epnum) (HSUSBD->DMACTL = (HSUSBD->DMACTL & ~(HSUSBD_DMACTL_EPNUM_Msk | HSUSBD_DMACTL_DMARD_Msk | 0x100)) | (epnum)) /*!<Set DMA transfer type to write \hideinitializer */
#define HSUSBD_ENABLE_DMA() (HSUSBD->DMACTL |= HSUSBD_DMACTL_DMAEN_Msk) /*!<Enable DMA transfer \hideinitializer */
#define HSUSBD_IS_ATTACHED() ((uint32_t)(HSUSBD->PHYCTL & HSUSBD_PHYCTL_VBUSDET_Msk)) /*!<Check cable connect state \hideinitializer */
/**
* @brief HSUSBD_memcpy, Copy bytes hardware limitation
* @param[in] u8Dst Destination pointer.
* @param[in] u8Src Source pointer.
* @param[in] u32Size Copy size.
* @retval None.
*/
__STATIC_INLINE void HSUSBD_MemCopy(uint8_t u8Dst[], uint8_t u8Src[], uint32_t u32Size)
{
uint32_t i = 0ul;
while (u32Size--)
{
u8Dst[i] = u8Src[i];
i++;
}
}
/**
* @brief HSUSBD_ResetDMA
* @param None
* @retval None.
*/
__STATIC_INLINE void HSUSBD_ResetDMA(void)
{
HSUSBD->DMACNT = 0ul;
HSUSBD->DMACTL = 0x80ul;
HSUSBD->DMACTL = 0x00ul;
}
/**
* @brief HSUSBD_SetEpBufAddr, Set Endpoint buffer address
* @param[in] u32Ep Endpoint Number
* @param[in] u32Base Buffer Start Address
* @param[in] u32Len Buffer length
* @retval None.
*/
__STATIC_INLINE void HSUSBD_SetEpBufAddr(uint32_t u32Ep, uint32_t u32Base, uint32_t u32Len)
{
if (u32Ep == CEP)
{
HSUSBD->CEPBUFST = u32Base;
HSUSBD->CEPBUFEND = u32Base + u32Len - 1ul;
}
else
{
HSUSBD->EP[u32Ep].EPBUFST = u32Base;
HSUSBD->EP[u32Ep].EPBUFEND = u32Base + u32Len - 1ul;
}
}
/**
* @brief HSUSBD_ConfigEp, Config Endpoint
* @param[in] u32Ep USB endpoint
* @param[in] u32EpNum Endpoint number
* @param[in] u32EpType Endpoint type
* @param[in] u32EpDir Endpoint direction
* @retval None.
*/
__STATIC_INLINE void HSUSBD_ConfigEp(uint32_t u32Ep, uint32_t u32EpNum, uint32_t u32EpType, uint32_t u32EpDir)
{
if (u32EpType == HSUSBD_EP_CFG_TYPE_BULK)
{
HSUSBD->EP[u32Ep].EPRSPCTL = (HSUSBD_EP_RSPCTL_FLUSH|HSUSBD_EP_RSPCTL_MODE_AUTO);
}
else if (u32EpType == HSUSBD_EP_CFG_TYPE_INT)
{
HSUSBD->EP[u32Ep].EPRSPCTL = (HSUSBD_EP_RSPCTL_FLUSH|HSUSBD_EP_RSPCTL_MODE_MANUAL);
}
else if (u32EpType == HSUSBD_EP_CFG_TYPE_ISO)
{
HSUSBD->EP[u32Ep].EPRSPCTL = (HSUSBD_EP_RSPCTL_FLUSH|HSUSBD_EP_RSPCTL_MODE_FLY);
}
HSUSBD->EP[u32Ep].EPCFG = (u32EpType|u32EpDir|HSUSBD_EP_CFG_VALID|(u32EpNum << 4));
}
/**
* @brief Set USB endpoint stall state
* @param[in] u32Ep The USB endpoint ID.
* @return None
* @details Set USB endpoint stall state for the specified endpoint ID. Endpoint will respond STALL token automatically.
*/
__STATIC_INLINE void HSUSBD_SetEpStall(uint32_t u32Ep)
{
if (u32Ep == CEP)
{
HSUSBD_SET_CEP_STATE(HSUSBD_CEPCTL_STALL);
}
else
{
HSUSBD->EP[u32Ep].EPRSPCTL = (HSUSBD->EP[u32Ep].EPRSPCTL & 0xf7ul) | HSUSBD_EP_RSPCTL_HALT;
}
}
/**
* @brief Set USB endpoint stall state
*
* @param[in] u32EpNum USB endpoint
* @return None
*
* @details Set USB endpoint stall state, endpoint will return STALL token.
*/
__STATIC_INLINE void HSUSBD_SetStall(uint32_t u32EpNum)
{
uint32_t i;
if (u32EpNum == 0ul)
{
HSUSBD_SET_CEP_STATE(HSUSBD_CEPCTL_STALL);
}
else
{
for (i=0ul; i<HSUSBD_MAX_EP; i++)
{
if (((HSUSBD->EP[i].EPCFG & 0xf0ul) >> 4) == u32EpNum)
{
HSUSBD->EP[i].EPRSPCTL = (HSUSBD->EP[i].EPRSPCTL & 0xf7ul) | HSUSBD_EP_RSPCTL_HALT;
}
}
}
}
/**
* @brief Clear USB endpoint stall state
* @param[in] u32Ep The USB endpoint ID.
* @return None
* @details Clear USB endpoint stall state for the specified endpoint ID. Endpoint will respond ACK/NAK token.
*/
__STATIC_INLINE void HSUSBD_ClearEpStall(uint32_t u32Ep)
{
HSUSBD->EP[u32Ep].EPRSPCTL = HSUSBD_EP_RSPCTL_TOGGLE;
}
/**
* @brief Clear USB endpoint stall state
*
* @param[in] u32EpNum USB endpoint
* @return None
*
* @details Clear USB endpoint stall state, endpoint will return ACK/NAK token.
*/
__STATIC_INLINE void HSUSBD_ClearStall(uint32_t u32EpNum)
{
uint32_t i;
for (i=0ul; i<HSUSBD_MAX_EP; i++)
{
if (((HSUSBD->EP[i].EPCFG & 0xf0ul) >> 4) == u32EpNum)
{
HSUSBD->EP[i].EPRSPCTL = HSUSBD_EP_RSPCTL_TOGGLE;
}
}
}
/**
* @brief Get USB endpoint stall state
* @param[in] u32Ep The USB endpoint ID.
* @retval 0 USB endpoint is not stalled.
* @retval Others USB endpoint is stalled.
* @details Get USB endpoint stall state of the specified endpoint ID.
*/
__STATIC_INLINE uint32_t HSUSBD_GetEpStall(uint32_t u32Ep)
{
return (HSUSBD->EP[u32Ep].EPRSPCTL & HSUSBD_EP_RSPCTL_HALT);
}
/**
* @brief Get USB endpoint stall state
*
* @param[in] u32EpNum USB endpoint
* @retval 0: USB endpoint is not stalled.
* @retval non-0: USB endpoint is stalled.
*
* @details Get USB endpoint stall state.
*/
__STATIC_INLINE uint32_t HSUSBD_GetStall(uint32_t u32EpNum)
{
uint32_t i;
uint32_t val = 0ul;
for (i=0ul; i<HSUSBD_MAX_EP; i++)
{
if (((HSUSBD->EP[i].EPCFG & 0xf0ul) >> 4) == u32EpNum)
{
val = (HSUSBD->EP[i].EPRSPCTL & HSUSBD_EP_RSPCTL_HALT);
break;
}
}
return val;
}
/*-------------------------------------------------------------------------------------------*/
typedef void (*HSUSBD_VENDOR_REQ)(void); /*!<USB Vendor request callback function */
typedef void (*HSUSBD_CLASS_REQ)(void); /*!<USB Class request callback function */
typedef void (*HSUSBD_SET_INTERFACE_REQ)(uint32_t u32AltInterface); /*!<USB Standard request "Set Interface" callback function */
void HSUSBD_Open(S_HSUSBD_INFO_T *param, HSUSBD_CLASS_REQ pfnClassReq, HSUSBD_SET_INTERFACE_REQ pfnSetInterface);
void HSUSBD_Start(void);
void HSUSBD_ProcessSetupPacket(void);
void HSUSBD_StandardRequest(void);
void HSUSBD_UpdateDeviceState(void);
void HSUSBD_PrepareCtrlIn(uint8_t pu8Buf[], uint32_t u32Size);
void HSUSBD_CtrlIn(void);
void HSUSBD_CtrlOut(uint8_t pu8Buf[], uint32_t u32Size);
void HSUSBD_SwReset(void);
void HSUSBD_SetVendorRequest(HSUSBD_VENDOR_REQ pfnVendorReq);
/*@}*/ /* end of group HSUSBD_EXPORTED_FUNCTIONS */
/*@}*/ /* end of group HSUSBD_Driver */
/*@}*/ /* end of group Standard_Driver */
#ifdef __cplusplus
}
#endif
#endif /*__NU_HSUSBD_H__ */
/*** (C) COPYRIGHT 2016 Nuvoton Technology Corp. ***/