1755 lines
50 KiB
C
1755 lines
50 KiB
C
/*
|
|
* Copyright (c) 2015, Freescale Semiconductor, Inc.
|
|
* Copyright 2016-2017 NXP
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
*
|
|
* o Redistributions of source code must retain the above copyright notice, this list
|
|
* of conditions and the following disclaimer.
|
|
*
|
|
* o Redistributions in binary form must reproduce the above copyright notice, this
|
|
* list of conditions and the following disclaimer in the documentation and/or
|
|
* other materials provided with the distribution.
|
|
*
|
|
* o Neither the name of the copyright holder nor the names of its
|
|
* contributors may be used to endorse or promote products derived from this
|
|
* software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
|
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
|
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include "fsl_edma.h"
|
|
|
|
/*******************************************************************************
|
|
* Definitions
|
|
******************************************************************************/
|
|
|
|
#define EDMA_TRANSFER_ENABLED_MASK 0x80U
|
|
|
|
/*******************************************************************************
|
|
* Prototypes
|
|
******************************************************************************/
|
|
|
|
/*!
|
|
* @brief Get instance number for EDMA.
|
|
*
|
|
* @param base EDMA peripheral base address.
|
|
*/
|
|
static uint32_t EDMA_GetInstance(DMA_Type *base);
|
|
|
|
/*!
|
|
* @brief Push content of TCD structure into hardware TCD register.
|
|
*
|
|
* @param base EDMA peripheral base address.
|
|
* @param channel EDMA channel number.
|
|
* @param tcd Point to TCD structure.
|
|
*/
|
|
static void EDMA_InstallTCD(DMA_Type *base, uint32_t channel, edma_tcd_t *tcd);
|
|
|
|
/*******************************************************************************
|
|
* Variables
|
|
******************************************************************************/
|
|
|
|
/*! @brief Array to map EDMA instance number to base pointer. */
|
|
static DMA_Type *const s_edmaBases[] = DMA_BASE_PTRS;
|
|
|
|
#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
|
|
/*! @brief Array to map EDMA instance number to clock name. */
|
|
static const clock_ip_name_t s_edmaClockName[] = EDMA_CLOCKS;
|
|
#endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */
|
|
|
|
/*! @brief Array to map EDMA instance number to IRQ number. */
|
|
static const IRQn_Type s_edmaIRQNumber[][FSL_FEATURE_EDMA_MODULE_CHANNEL] = DMA_CHN_IRQS;
|
|
|
|
/*! @brief Pointers to transfer handle for each EDMA channel. */
|
|
static edma_handle_t *s_EDMAHandle[FSL_FEATURE_EDMA_MODULE_CHANNEL * FSL_FEATURE_SOC_EDMA_COUNT];
|
|
|
|
/*******************************************************************************
|
|
* Code
|
|
******************************************************************************/
|
|
|
|
static uint32_t EDMA_GetInstance(DMA_Type *base)
|
|
{
|
|
uint32_t instance;
|
|
|
|
/* Find the instance index from base address mappings. */
|
|
for (instance = 0; instance < ARRAY_SIZE(s_edmaBases); instance++)
|
|
{
|
|
if (s_edmaBases[instance] == base)
|
|
{
|
|
break;
|
|
}
|
|
}
|
|
|
|
assert(instance < ARRAY_SIZE(s_edmaBases));
|
|
|
|
return instance;
|
|
}
|
|
|
|
static void EDMA_InstallTCD(DMA_Type *base, uint32_t channel, edma_tcd_t *tcd)
|
|
{
|
|
assert(channel < FSL_FEATURE_EDMA_MODULE_CHANNEL);
|
|
assert(tcd != NULL);
|
|
assert(((uint32_t)tcd & 0x1FU) == 0);
|
|
|
|
/* Push tcd into hardware TCD register */
|
|
base->TCD[channel].SADDR = tcd->SADDR;
|
|
base->TCD[channel].SOFF = tcd->SOFF;
|
|
base->TCD[channel].ATTR = tcd->ATTR;
|
|
base->TCD[channel].NBYTES_MLNO = tcd->NBYTES;
|
|
base->TCD[channel].SLAST = tcd->SLAST;
|
|
base->TCD[channel].DADDR = tcd->DADDR;
|
|
base->TCD[channel].DOFF = tcd->DOFF;
|
|
base->TCD[channel].CITER_ELINKNO = tcd->CITER;
|
|
base->TCD[channel].DLAST_SGA = tcd->DLAST_SGA;
|
|
/* Clear DONE bit first, otherwise ESG cannot be set */
|
|
base->TCD[channel].CSR = 0;
|
|
base->TCD[channel].CSR = tcd->CSR;
|
|
base->TCD[channel].BITER_ELINKNO = tcd->BITER;
|
|
}
|
|
|
|
void EDMA_Init(DMA_Type *base, const edma_config_t *config)
|
|
{
|
|
assert(config != NULL);
|
|
|
|
uint32_t tmpreg;
|
|
|
|
#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
|
|
/* Ungate EDMA periphral clock */
|
|
CLOCK_EnableClock(s_edmaClockName[EDMA_GetInstance(base)]);
|
|
#endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */
|
|
/* Configure EDMA peripheral according to the configuration structure. */
|
|
tmpreg = base->CR;
|
|
tmpreg &= ~(DMA_CR_ERCA_MASK | DMA_CR_HOE_MASK | DMA_CR_CLM_MASK | DMA_CR_EDBG_MASK);
|
|
tmpreg |= (DMA_CR_ERCA(config->enableRoundRobinArbitration) | DMA_CR_HOE(config->enableHaltOnError) |
|
|
DMA_CR_CLM(config->enableContinuousLinkMode) | DMA_CR_EDBG(config->enableDebugMode) | DMA_CR_EMLM(true));
|
|
base->CR = tmpreg;
|
|
}
|
|
|
|
void EDMA_Deinit(DMA_Type *base)
|
|
{
|
|
#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
|
|
/* Gate EDMA periphral clock */
|
|
CLOCK_DisableClock(s_edmaClockName[EDMA_GetInstance(base)]);
|
|
#endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */
|
|
}
|
|
|
|
void EDMA_GetDefaultConfig(edma_config_t *config)
|
|
{
|
|
assert(config != NULL);
|
|
|
|
config->enableRoundRobinArbitration = false;
|
|
config->enableHaltOnError = true;
|
|
config->enableContinuousLinkMode = false;
|
|
config->enableDebugMode = false;
|
|
}
|
|
|
|
void EDMA_ResetChannel(DMA_Type *base, uint32_t channel)
|
|
{
|
|
assert(channel < FSL_FEATURE_EDMA_MODULE_CHANNEL);
|
|
|
|
EDMA_TcdReset((edma_tcd_t *)&base->TCD[channel]);
|
|
}
|
|
|
|
void EDMA_SetTransferConfig(DMA_Type *base, uint32_t channel, const edma_transfer_config_t *config, edma_tcd_t *nextTcd)
|
|
{
|
|
assert(channel < FSL_FEATURE_EDMA_MODULE_CHANNEL);
|
|
assert(config != NULL);
|
|
assert(((uint32_t)nextTcd & 0x1FU) == 0);
|
|
|
|
EDMA_TcdSetTransferConfig((edma_tcd_t *)&base->TCD[channel], config, nextTcd);
|
|
}
|
|
|
|
void EDMA_SetMinorOffsetConfig(DMA_Type *base, uint32_t channel, const edma_minor_offset_config_t *config)
|
|
{
|
|
assert(channel < FSL_FEATURE_EDMA_MODULE_CHANNEL);
|
|
assert(config != NULL);
|
|
|
|
uint32_t tmpreg;
|
|
|
|
tmpreg = base->TCD[channel].NBYTES_MLOFFYES;
|
|
tmpreg &= ~(DMA_NBYTES_MLOFFYES_SMLOE_MASK | DMA_NBYTES_MLOFFYES_DMLOE_MASK | DMA_NBYTES_MLOFFYES_MLOFF_MASK);
|
|
tmpreg |=
|
|
(DMA_NBYTES_MLOFFYES_SMLOE(config->enableSrcMinorOffset) |
|
|
DMA_NBYTES_MLOFFYES_DMLOE(config->enableDestMinorOffset) | DMA_NBYTES_MLOFFYES_MLOFF(config->minorOffset));
|
|
base->TCD[channel].NBYTES_MLOFFYES = tmpreg;
|
|
}
|
|
|
|
void EDMA_SetChannelLink(DMA_Type *base, uint32_t channel, edma_channel_link_type_t type, uint32_t linkedChannel)
|
|
{
|
|
assert(channel < FSL_FEATURE_EDMA_MODULE_CHANNEL);
|
|
assert(linkedChannel < FSL_FEATURE_EDMA_MODULE_CHANNEL);
|
|
|
|
EDMA_TcdSetChannelLink((edma_tcd_t *)&base->TCD[channel], type, linkedChannel);
|
|
}
|
|
|
|
void EDMA_SetBandWidth(DMA_Type *base, uint32_t channel, edma_bandwidth_t bandWidth)
|
|
{
|
|
assert(channel < FSL_FEATURE_EDMA_MODULE_CHANNEL);
|
|
|
|
base->TCD[channel].CSR = (base->TCD[channel].CSR & (~DMA_CSR_BWC_MASK)) | DMA_CSR_BWC(bandWidth);
|
|
}
|
|
|
|
void EDMA_SetModulo(DMA_Type *base, uint32_t channel, edma_modulo_t srcModulo, edma_modulo_t destModulo)
|
|
{
|
|
assert(channel < FSL_FEATURE_EDMA_MODULE_CHANNEL);
|
|
|
|
uint32_t tmpreg;
|
|
|
|
tmpreg = base->TCD[channel].ATTR & (~(DMA_ATTR_SMOD_MASK | DMA_ATTR_DMOD_MASK));
|
|
base->TCD[channel].ATTR = tmpreg | DMA_ATTR_DMOD(destModulo) | DMA_ATTR_SMOD(srcModulo);
|
|
}
|
|
|
|
void EDMA_EnableChannelInterrupts(DMA_Type *base, uint32_t channel, uint32_t mask)
|
|
{
|
|
assert(channel < FSL_FEATURE_EDMA_MODULE_CHANNEL);
|
|
|
|
/* Enable error interrupt */
|
|
if (mask & kEDMA_ErrorInterruptEnable)
|
|
{
|
|
base->EEI |= (0x1U << channel);
|
|
}
|
|
|
|
/* Enable Major interrupt */
|
|
if (mask & kEDMA_MajorInterruptEnable)
|
|
{
|
|
base->TCD[channel].CSR |= DMA_CSR_INTMAJOR_MASK;
|
|
}
|
|
|
|
/* Enable Half major interrupt */
|
|
if (mask & kEDMA_HalfInterruptEnable)
|
|
{
|
|
base->TCD[channel].CSR |= DMA_CSR_INTHALF_MASK;
|
|
}
|
|
}
|
|
|
|
void EDMA_DisableChannelInterrupts(DMA_Type *base, uint32_t channel, uint32_t mask)
|
|
{
|
|
assert(channel < FSL_FEATURE_EDMA_MODULE_CHANNEL);
|
|
|
|
/* Disable error interrupt */
|
|
if (mask & kEDMA_ErrorInterruptEnable)
|
|
{
|
|
base->EEI &= ~(0x1U << channel);
|
|
}
|
|
|
|
/* Disable Major interrupt */
|
|
if (mask & kEDMA_MajorInterruptEnable)
|
|
{
|
|
base->TCD[channel].CSR &= ~DMA_CSR_INTMAJOR_MASK;
|
|
}
|
|
|
|
/* Disable Half major interrupt */
|
|
if (mask & kEDMA_HalfInterruptEnable)
|
|
{
|
|
base->TCD[channel].CSR &= ~DMA_CSR_INTHALF_MASK;
|
|
}
|
|
}
|
|
|
|
void EDMA_TcdReset(edma_tcd_t *tcd)
|
|
{
|
|
assert(tcd != NULL);
|
|
assert(((uint32_t)tcd & 0x1FU) == 0);
|
|
|
|
/* Reset channel TCD */
|
|
tcd->SADDR = 0U;
|
|
tcd->SOFF = 0U;
|
|
tcd->ATTR = 0U;
|
|
tcd->NBYTES = 0U;
|
|
tcd->SLAST = 0U;
|
|
tcd->DADDR = 0U;
|
|
tcd->DOFF = 0U;
|
|
tcd->CITER = 0U;
|
|
tcd->DLAST_SGA = 0U;
|
|
/* Enable auto disable request feature */
|
|
tcd->CSR = DMA_CSR_DREQ(true);
|
|
tcd->BITER = 0U;
|
|
}
|
|
|
|
void EDMA_TcdSetTransferConfig(edma_tcd_t *tcd, const edma_transfer_config_t *config, edma_tcd_t *nextTcd)
|
|
{
|
|
assert(tcd != NULL);
|
|
assert(((uint32_t)tcd & 0x1FU) == 0);
|
|
assert(config != NULL);
|
|
assert(((uint32_t)nextTcd & 0x1FU) == 0);
|
|
|
|
/* source address */
|
|
tcd->SADDR = config->srcAddr;
|
|
/* destination address */
|
|
tcd->DADDR = config->destAddr;
|
|
/* Source data and destination data transfer size */
|
|
tcd->ATTR = DMA_ATTR_SSIZE(config->srcTransferSize) | DMA_ATTR_DSIZE(config->destTransferSize);
|
|
/* Source address signed offset */
|
|
tcd->SOFF = config->srcOffset;
|
|
/* Destination address signed offset */
|
|
tcd->DOFF = config->destOffset;
|
|
/* Minor byte transfer count */
|
|
tcd->NBYTES = config->minorLoopBytes;
|
|
/* Current major iteration count */
|
|
tcd->CITER = config->majorLoopCounts;
|
|
/* Starting major iteration count */
|
|
tcd->BITER = config->majorLoopCounts;
|
|
/* Enable scatter/gather processing */
|
|
if (nextTcd != NULL)
|
|
{
|
|
tcd->DLAST_SGA = (uint32_t)nextTcd;
|
|
/*
|
|
Before call EDMA_TcdSetTransferConfig or EDMA_SetTransferConfig,
|
|
user must call EDMA_TcdReset or EDMA_ResetChannel which will set
|
|
DREQ, so must use "|" or "&" rather than "=".
|
|
|
|
Clear the DREQ bit because scatter gather has been enabled, so the
|
|
previous transfer is not the last transfer, and channel request should
|
|
be enabled at the next transfer(the next TCD).
|
|
*/
|
|
tcd->CSR = (tcd->CSR | DMA_CSR_ESG_MASK) & ~DMA_CSR_DREQ_MASK;
|
|
}
|
|
}
|
|
|
|
void EDMA_TcdSetMinorOffsetConfig(edma_tcd_t *tcd, const edma_minor_offset_config_t *config)
|
|
{
|
|
assert(tcd != NULL);
|
|
assert(((uint32_t)tcd & 0x1FU) == 0);
|
|
|
|
uint32_t tmpreg;
|
|
|
|
tmpreg = tcd->NBYTES &
|
|
~(DMA_NBYTES_MLOFFYES_SMLOE_MASK | DMA_NBYTES_MLOFFYES_DMLOE_MASK | DMA_NBYTES_MLOFFYES_MLOFF_MASK);
|
|
tmpreg |=
|
|
(DMA_NBYTES_MLOFFYES_SMLOE(config->enableSrcMinorOffset) |
|
|
DMA_NBYTES_MLOFFYES_DMLOE(config->enableDestMinorOffset) | DMA_NBYTES_MLOFFYES_MLOFF(config->minorOffset));
|
|
tcd->NBYTES = tmpreg;
|
|
}
|
|
|
|
void EDMA_TcdSetChannelLink(edma_tcd_t *tcd, edma_channel_link_type_t type, uint32_t linkedChannel)
|
|
{
|
|
assert(tcd != NULL);
|
|
assert(((uint32_t)tcd & 0x1FU) == 0);
|
|
assert(linkedChannel < FSL_FEATURE_EDMA_MODULE_CHANNEL);
|
|
|
|
if (type == kEDMA_MinorLink) /* Minor link config */
|
|
{
|
|
uint32_t tmpreg;
|
|
|
|
/* Enable minor link */
|
|
tcd->CITER |= DMA_CITER_ELINKYES_ELINK_MASK;
|
|
tcd->BITER |= DMA_BITER_ELINKYES_ELINK_MASK;
|
|
/* Set likned channel */
|
|
tmpreg = tcd->CITER & (~DMA_CITER_ELINKYES_LINKCH_MASK);
|
|
tmpreg |= DMA_CITER_ELINKYES_LINKCH(linkedChannel);
|
|
tcd->CITER = tmpreg;
|
|
tmpreg = tcd->BITER & (~DMA_BITER_ELINKYES_LINKCH_MASK);
|
|
tmpreg |= DMA_BITER_ELINKYES_LINKCH(linkedChannel);
|
|
tcd->BITER = tmpreg;
|
|
}
|
|
else if (type == kEDMA_MajorLink) /* Major link config */
|
|
{
|
|
uint32_t tmpreg;
|
|
|
|
/* Enable major link */
|
|
tcd->CSR |= DMA_CSR_MAJORELINK_MASK;
|
|
/* Set major linked channel */
|
|
tmpreg = tcd->CSR & (~DMA_CSR_MAJORLINKCH_MASK);
|
|
tcd->CSR = tmpreg | DMA_CSR_MAJORLINKCH(linkedChannel);
|
|
}
|
|
else /* Link none */
|
|
{
|
|
tcd->CITER &= ~DMA_CITER_ELINKYES_ELINK_MASK;
|
|
tcd->BITER &= ~DMA_BITER_ELINKYES_ELINK_MASK;
|
|
tcd->CSR &= ~DMA_CSR_MAJORELINK_MASK;
|
|
}
|
|
}
|
|
|
|
void EDMA_TcdSetModulo(edma_tcd_t *tcd, edma_modulo_t srcModulo, edma_modulo_t destModulo)
|
|
{
|
|
assert(tcd != NULL);
|
|
assert(((uint32_t)tcd & 0x1FU) == 0);
|
|
|
|
uint32_t tmpreg;
|
|
|
|
tmpreg = tcd->ATTR & (~(DMA_ATTR_SMOD_MASK | DMA_ATTR_DMOD_MASK));
|
|
tcd->ATTR = tmpreg | DMA_ATTR_DMOD(destModulo) | DMA_ATTR_SMOD(srcModulo);
|
|
}
|
|
|
|
void EDMA_TcdEnableInterrupts(edma_tcd_t *tcd, uint32_t mask)
|
|
{
|
|
assert(tcd != NULL);
|
|
|
|
/* Enable Major interrupt */
|
|
if (mask & kEDMA_MajorInterruptEnable)
|
|
{
|
|
tcd->CSR |= DMA_CSR_INTMAJOR_MASK;
|
|
}
|
|
|
|
/* Enable Half major interrupt */
|
|
if (mask & kEDMA_HalfInterruptEnable)
|
|
{
|
|
tcd->CSR |= DMA_CSR_INTHALF_MASK;
|
|
}
|
|
}
|
|
|
|
void EDMA_TcdDisableInterrupts(edma_tcd_t *tcd, uint32_t mask)
|
|
{
|
|
assert(tcd != NULL);
|
|
|
|
/* Disable Major interrupt */
|
|
if (mask & kEDMA_MajorInterruptEnable)
|
|
{
|
|
tcd->CSR &= ~DMA_CSR_INTMAJOR_MASK;
|
|
}
|
|
|
|
/* Disable Half major interrupt */
|
|
if (mask & kEDMA_HalfInterruptEnable)
|
|
{
|
|
tcd->CSR &= ~DMA_CSR_INTHALF_MASK;
|
|
}
|
|
}
|
|
|
|
uint32_t EDMA_GetRemainingMajorLoopCount(DMA_Type *base, uint32_t channel)
|
|
{
|
|
assert(channel < FSL_FEATURE_EDMA_MODULE_CHANNEL);
|
|
|
|
uint32_t remainingCount = 0;
|
|
|
|
if (DMA_CSR_DONE_MASK & base->TCD[channel].CSR)
|
|
{
|
|
remainingCount = 0;
|
|
}
|
|
else
|
|
{
|
|
/* Calculate the unfinished bytes */
|
|
if (base->TCD[channel].CITER_ELINKNO & DMA_CITER_ELINKNO_ELINK_MASK)
|
|
{
|
|
remainingCount =
|
|
(base->TCD[channel].CITER_ELINKYES & DMA_CITER_ELINKYES_CITER_MASK) >> DMA_CITER_ELINKYES_CITER_SHIFT;
|
|
}
|
|
else
|
|
{
|
|
remainingCount =
|
|
(base->TCD[channel].CITER_ELINKNO & DMA_CITER_ELINKNO_CITER_MASK) >> DMA_CITER_ELINKNO_CITER_SHIFT;
|
|
}
|
|
}
|
|
|
|
return remainingCount;
|
|
}
|
|
|
|
uint32_t EDMA_GetChannelStatusFlags(DMA_Type *base, uint32_t channel)
|
|
{
|
|
assert(channel < FSL_FEATURE_EDMA_MODULE_CHANNEL);
|
|
|
|
uint32_t retval = 0;
|
|
|
|
/* Get DONE bit flag */
|
|
retval |= ((base->TCD[channel].CSR & DMA_CSR_DONE_MASK) >> DMA_CSR_DONE_SHIFT);
|
|
/* Get ERROR bit flag */
|
|
retval |= (((base->ERR >> channel) & 0x1U) << 1U);
|
|
/* Get INT bit flag */
|
|
retval |= (((base->INT >> channel) & 0x1U) << 2U);
|
|
|
|
return retval;
|
|
}
|
|
|
|
void EDMA_ClearChannelStatusFlags(DMA_Type *base, uint32_t channel, uint32_t mask)
|
|
{
|
|
assert(channel < FSL_FEATURE_EDMA_MODULE_CHANNEL);
|
|
|
|
/* Clear DONE bit flag */
|
|
if (mask & kEDMA_DoneFlag)
|
|
{
|
|
base->CDNE = channel;
|
|
}
|
|
/* Clear ERROR bit flag */
|
|
if (mask & kEDMA_ErrorFlag)
|
|
{
|
|
base->CERR = channel;
|
|
}
|
|
/* Clear INT bit flag */
|
|
if (mask & kEDMA_InterruptFlag)
|
|
{
|
|
base->CINT = channel;
|
|
}
|
|
}
|
|
|
|
void EDMA_CreateHandle(edma_handle_t *handle, DMA_Type *base, uint32_t channel)
|
|
{
|
|
assert(handle != NULL);
|
|
assert(channel < FSL_FEATURE_EDMA_MODULE_CHANNEL);
|
|
|
|
uint32_t edmaInstance;
|
|
uint32_t channelIndex;
|
|
edma_tcd_t *tcdRegs;
|
|
|
|
/* Zero the handle */
|
|
memset(handle, 0, sizeof(*handle));
|
|
|
|
handle->base = base;
|
|
handle->channel = channel;
|
|
/* Get the DMA instance number */
|
|
edmaInstance = EDMA_GetInstance(base);
|
|
channelIndex = (edmaInstance * FSL_FEATURE_EDMA_MODULE_CHANNEL) + channel;
|
|
s_EDMAHandle[channelIndex] = handle;
|
|
|
|
/* Enable NVIC interrupt */
|
|
EnableIRQ(s_edmaIRQNumber[edmaInstance][channel]);
|
|
|
|
/*
|
|
Reset TCD registers to zero. Unlike the EDMA_TcdReset(DREQ will be set),
|
|
CSR will be 0. Because in order to suit EDMA busy check mechanism in
|
|
EDMA_SubmitTransfer, CSR must be set 0.
|
|
*/
|
|
tcdRegs = (edma_tcd_t *)&handle->base->TCD[handle->channel];
|
|
tcdRegs->SADDR = 0;
|
|
tcdRegs->SOFF = 0;
|
|
tcdRegs->ATTR = 0;
|
|
tcdRegs->NBYTES = 0;
|
|
tcdRegs->SLAST = 0;
|
|
tcdRegs->DADDR = 0;
|
|
tcdRegs->DOFF = 0;
|
|
tcdRegs->CITER = 0;
|
|
tcdRegs->DLAST_SGA = 0;
|
|
tcdRegs->CSR = 0;
|
|
tcdRegs->BITER = 0;
|
|
}
|
|
|
|
void EDMA_InstallTCDMemory(edma_handle_t *handle, edma_tcd_t *tcdPool, uint32_t tcdSize)
|
|
{
|
|
assert(handle != NULL);
|
|
assert(((uint32_t)tcdPool & 0x1FU) == 0);
|
|
|
|
/* Initialize tcd queue attibute. */
|
|
handle->header = 0;
|
|
handle->tail = 0;
|
|
handle->tcdUsed = 0;
|
|
handle->tcdSize = tcdSize;
|
|
handle->flags = 0;
|
|
handle->tcdPool = tcdPool;
|
|
}
|
|
|
|
void EDMA_SetCallback(edma_handle_t *handle, edma_callback callback, void *userData)
|
|
{
|
|
assert(handle != NULL);
|
|
|
|
handle->callback = callback;
|
|
handle->userData = userData;
|
|
}
|
|
|
|
void EDMA_PrepareTransfer(edma_transfer_config_t *config,
|
|
void *srcAddr,
|
|
uint32_t srcWidth,
|
|
void *destAddr,
|
|
uint32_t destWidth,
|
|
uint32_t bytesEachRequest,
|
|
uint32_t transferBytes,
|
|
edma_transfer_type_t type)
|
|
{
|
|
assert(config != NULL);
|
|
assert(srcAddr != NULL);
|
|
assert(destAddr != NULL);
|
|
assert((srcWidth == 1U) || (srcWidth == 2U) || (srcWidth == 4U) || (srcWidth == 16U) || (srcWidth == 32U));
|
|
assert((destWidth == 1U) || (destWidth == 2U) || (destWidth == 4U) || (destWidth == 16U) || (destWidth == 32U));
|
|
assert(transferBytes % bytesEachRequest == 0);
|
|
|
|
config->destAddr = (uint32_t)destAddr;
|
|
config->srcAddr = (uint32_t)srcAddr;
|
|
config->minorLoopBytes = bytesEachRequest;
|
|
config->majorLoopCounts = transferBytes / bytesEachRequest;
|
|
switch (srcWidth)
|
|
{
|
|
case 1U:
|
|
config->srcTransferSize = kEDMA_TransferSize1Bytes;
|
|
break;
|
|
case 2U:
|
|
config->srcTransferSize = kEDMA_TransferSize2Bytes;
|
|
break;
|
|
case 4U:
|
|
config->srcTransferSize = kEDMA_TransferSize4Bytes;
|
|
break;
|
|
case 16U:
|
|
config->srcTransferSize = kEDMA_TransferSize16Bytes;
|
|
break;
|
|
case 32U:
|
|
config->srcTransferSize = kEDMA_TransferSize32Bytes;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
switch (destWidth)
|
|
{
|
|
case 1U:
|
|
config->destTransferSize = kEDMA_TransferSize1Bytes;
|
|
break;
|
|
case 2U:
|
|
config->destTransferSize = kEDMA_TransferSize2Bytes;
|
|
break;
|
|
case 4U:
|
|
config->destTransferSize = kEDMA_TransferSize4Bytes;
|
|
break;
|
|
case 16U:
|
|
config->destTransferSize = kEDMA_TransferSize16Bytes;
|
|
break;
|
|
case 32U:
|
|
config->destTransferSize = kEDMA_TransferSize32Bytes;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
switch (type)
|
|
{
|
|
case kEDMA_MemoryToMemory:
|
|
config->destOffset = destWidth;
|
|
config->srcOffset = srcWidth;
|
|
break;
|
|
case kEDMA_MemoryToPeripheral:
|
|
config->destOffset = 0U;
|
|
config->srcOffset = srcWidth;
|
|
break;
|
|
case kEDMA_PeripheralToMemory:
|
|
config->destOffset = destWidth;
|
|
config->srcOffset = 0U;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
status_t EDMA_SubmitTransfer(edma_handle_t *handle, const edma_transfer_config_t *config)
|
|
{
|
|
assert(handle != NULL);
|
|
assert(config != NULL);
|
|
|
|
edma_tcd_t *tcdRegs = (edma_tcd_t *)&handle->base->TCD[handle->channel];
|
|
|
|
if (handle->tcdPool == NULL)
|
|
{
|
|
/*
|
|
Check if EDMA is busy: if the given channel started transfer, CSR will be not zero. Because
|
|
if it is the last transfer, DREQ will be set. If not, ESG will be set. So in order to suit
|
|
this check mechanism, EDMA_CreatHandle will clear CSR register.
|
|
*/
|
|
if ((tcdRegs->CSR != 0) && ((tcdRegs->CSR & DMA_CSR_DONE_MASK) == 0))
|
|
{
|
|
return kStatus_EDMA_Busy;
|
|
}
|
|
else
|
|
{
|
|
EDMA_SetTransferConfig(handle->base, handle->channel, config, NULL);
|
|
/* Enable auto disable request feature */
|
|
handle->base->TCD[handle->channel].CSR |= DMA_CSR_DREQ_MASK;
|
|
/* Enable major interrupt */
|
|
handle->base->TCD[handle->channel].CSR |= DMA_CSR_INTMAJOR_MASK;
|
|
|
|
return kStatus_Success;
|
|
}
|
|
}
|
|
else /* Use the TCD queue. */
|
|
{
|
|
uint32_t primask;
|
|
uint32_t csr;
|
|
int8_t currentTcd;
|
|
int8_t previousTcd;
|
|
int8_t nextTcd;
|
|
|
|
/* Check if tcd pool is full. */
|
|
primask = DisableGlobalIRQ();
|
|
if (handle->tcdUsed >= handle->tcdSize)
|
|
{
|
|
EnableGlobalIRQ(primask);
|
|
|
|
return kStatus_EDMA_QueueFull;
|
|
}
|
|
currentTcd = handle->tail;
|
|
handle->tcdUsed++;
|
|
/* Calculate index of next TCD */
|
|
nextTcd = currentTcd + 1U;
|
|
if (nextTcd == handle->tcdSize)
|
|
{
|
|
nextTcd = 0U;
|
|
}
|
|
/* Advance queue tail index */
|
|
handle->tail = nextTcd;
|
|
EnableGlobalIRQ(primask);
|
|
/* Calculate index of previous TCD */
|
|
previousTcd = currentTcd ? currentTcd - 1U : handle->tcdSize - 1U;
|
|
/* Configure current TCD block. */
|
|
EDMA_TcdReset(&handle->tcdPool[currentTcd]);
|
|
EDMA_TcdSetTransferConfig(&handle->tcdPool[currentTcd], config, NULL);
|
|
/* Enable major interrupt */
|
|
handle->tcdPool[currentTcd].CSR |= DMA_CSR_INTMAJOR_MASK;
|
|
/* Link current TCD with next TCD for identification of current TCD */
|
|
handle->tcdPool[currentTcd].DLAST_SGA = (uint32_t)&handle->tcdPool[nextTcd];
|
|
/* Chain from previous descriptor unless tcd pool size is 1(this descriptor is its own predecessor). */
|
|
if (currentTcd != previousTcd)
|
|
{
|
|
/* Enable scatter/gather feature in the previous TCD block. */
|
|
csr = (handle->tcdPool[previousTcd].CSR | DMA_CSR_ESG_MASK) & ~DMA_CSR_DREQ_MASK;
|
|
handle->tcdPool[previousTcd].CSR = csr;
|
|
/*
|
|
Check if the TCD blcok in the registers is the previous one (points to current TCD block). It
|
|
is used to check if the previous TCD linked has been loaded in TCD register. If so, it need to
|
|
link the TCD register in case link the current TCD with the dead chain when TCD loading occurs
|
|
before link the previous TCD block.
|
|
*/
|
|
if (tcdRegs->DLAST_SGA == (uint32_t)&handle->tcdPool[currentTcd])
|
|
{
|
|
/* Enable scatter/gather also in the TCD registers. */
|
|
csr = (tcdRegs->CSR | DMA_CSR_ESG_MASK) & ~DMA_CSR_DREQ_MASK;
|
|
/* Must write the CSR register one-time, because the transfer maybe finished anytime. */
|
|
tcdRegs->CSR = csr;
|
|
/*
|
|
It is very important to check the ESG bit!
|
|
Because this hardware design: if DONE bit is set, the ESG bit can not be set. So it can
|
|
be used to check if the dynamic TCD link operation is successful. If ESG bit is not set
|
|
and the DLAST_SGA is not the next TCD address(it means the dynamic TCD link succeed and
|
|
the current TCD block has been loaded into TCD registers), it means transfer finished
|
|
and TCD link operation fail, so must install TCD content into TCD registers and enable
|
|
transfer again. And if ESG is set, it means transfer has notfinished, so TCD dynamic
|
|
link succeed.
|
|
*/
|
|
if (tcdRegs->CSR & DMA_CSR_ESG_MASK)
|
|
{
|
|
return kStatus_Success;
|
|
}
|
|
/*
|
|
Check whether the current TCD block is already loaded in the TCD registers. It is another
|
|
condition when ESG bit is not set: it means the dynamic TCD link succeed and the current
|
|
TCD block has been loaded into TCD registers.
|
|
*/
|
|
if (tcdRegs->DLAST_SGA == (uint32_t)&handle->tcdPool[nextTcd])
|
|
{
|
|
return kStatus_Success;
|
|
}
|
|
/*
|
|
If go to this, means the previous transfer finished, and the DONE bit is set.
|
|
So shall configure TCD registers.
|
|
*/
|
|
}
|
|
else if (tcdRegs->DLAST_SGA != 0)
|
|
{
|
|
/* The current TCD block has been linked successfully. */
|
|
return kStatus_Success;
|
|
}
|
|
else
|
|
{
|
|
/*
|
|
DLAST_SGA is 0 and it means the first submit transfer, so shall configure
|
|
TCD registers.
|
|
*/
|
|
}
|
|
}
|
|
/* There is no live chain, TCD block need to be installed in TCD registers. */
|
|
EDMA_InstallTCD(handle->base, handle->channel, &handle->tcdPool[currentTcd]);
|
|
/* Enable channel request again. */
|
|
if (handle->flags & EDMA_TRANSFER_ENABLED_MASK)
|
|
{
|
|
handle->base->SERQ = DMA_SERQ_SERQ(handle->channel);
|
|
}
|
|
|
|
return kStatus_Success;
|
|
}
|
|
}
|
|
|
|
void EDMA_StartTransfer(edma_handle_t *handle)
|
|
{
|
|
assert(handle != NULL);
|
|
|
|
if (handle->tcdPool == NULL)
|
|
{
|
|
handle->base->SERQ = DMA_SERQ_SERQ(handle->channel);
|
|
}
|
|
else /* Use the TCD queue. */
|
|
{
|
|
uint32_t primask;
|
|
edma_tcd_t *tcdRegs = (edma_tcd_t *)&handle->base->TCD[handle->channel];
|
|
|
|
handle->flags |= EDMA_TRANSFER_ENABLED_MASK;
|
|
|
|
/* Check if there was at least one descriptor submitted since reset (TCD in registers is valid) */
|
|
if (tcdRegs->DLAST_SGA != 0U)
|
|
{
|
|
primask = DisableGlobalIRQ();
|
|
/* Check if channel request is actually disable. */
|
|
if ((handle->base->ERQ & (1U << handle->channel)) == 0U)
|
|
{
|
|
/* Check if transfer is paused. */
|
|
if ((!(tcdRegs->CSR & DMA_CSR_DONE_MASK)) || (tcdRegs->CSR & DMA_CSR_ESG_MASK))
|
|
{
|
|
/*
|
|
Re-enable channel request must be as soon as possible, so must put it into
|
|
critical section to avoid task switching or interrupt service routine.
|
|
*/
|
|
handle->base->SERQ = DMA_SERQ_SERQ(handle->channel);
|
|
}
|
|
}
|
|
EnableGlobalIRQ(primask);
|
|
}
|
|
}
|
|
}
|
|
|
|
void EDMA_StopTransfer(edma_handle_t *handle)
|
|
{
|
|
assert(handle != NULL);
|
|
|
|
handle->flags &= (~EDMA_TRANSFER_ENABLED_MASK);
|
|
handle->base->CERQ = DMA_CERQ_CERQ(handle->channel);
|
|
}
|
|
|
|
void EDMA_AbortTransfer(edma_handle_t *handle)
|
|
{
|
|
handle->base->CERQ = DMA_CERQ_CERQ(handle->channel);
|
|
/*
|
|
Clear CSR to release channel. Because if the given channel started transfer,
|
|
CSR will be not zero. Because if it is the last transfer, DREQ will be set.
|
|
If not, ESG will be set.
|
|
*/
|
|
handle->base->TCD[handle->channel].CSR = 0;
|
|
/* Cancel all next TCD transfer. */
|
|
handle->base->TCD[handle->channel].DLAST_SGA = 0;
|
|
}
|
|
|
|
void EDMA_HandleIRQ(edma_handle_t *handle)
|
|
{
|
|
assert(handle != NULL);
|
|
|
|
/* Clear EDMA interrupt flag */
|
|
handle->base->CINT = handle->channel;
|
|
if ((handle->tcdPool == NULL) && (handle->callback != NULL))
|
|
{
|
|
(handle->callback)(handle, handle->userData, true, 0);
|
|
}
|
|
else /* Use the TCD queue. Please refer to the API descriptions in the eDMA header file for detailed information. */
|
|
{
|
|
uint32_t sga = handle->base->TCD[handle->channel].DLAST_SGA;
|
|
uint32_t sga_index;
|
|
int32_t tcds_done;
|
|
uint8_t new_header;
|
|
bool transfer_done;
|
|
|
|
/* Check if transfer is already finished. */
|
|
transfer_done = ((handle->base->TCD[handle->channel].CSR & DMA_CSR_DONE_MASK) != 0);
|
|
/* Get the offset of the next transfer TCD blcoks to be loaded into the eDMA engine. */
|
|
sga -= (uint32_t)handle->tcdPool;
|
|
/* Get the index of the next transfer TCD blcoks to be loaded into the eDMA engine. */
|
|
sga_index = sga / sizeof(edma_tcd_t);
|
|
/* Adjust header positions. */
|
|
if (transfer_done)
|
|
{
|
|
/* New header shall point to the next TCD to be loaded (current one is already finished) */
|
|
new_header = sga_index;
|
|
}
|
|
else
|
|
{
|
|
/* New header shall point to this descriptor currently loaded (not finished yet) */
|
|
new_header = sga_index ? sga_index - 1U : handle->tcdSize - 1U;
|
|
}
|
|
/* Calculate the number of finished TCDs */
|
|
if (new_header == handle->header)
|
|
{
|
|
if (handle->tcdUsed == handle->tcdSize)
|
|
{
|
|
tcds_done = handle->tcdUsed;
|
|
}
|
|
else
|
|
{
|
|
/* No TCD in the memory are going to be loaded or internal error occurs. */
|
|
tcds_done = 0;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
tcds_done = new_header - handle->header;
|
|
if (tcds_done < 0)
|
|
{
|
|
tcds_done += handle->tcdSize;
|
|
}
|
|
}
|
|
/* Advance header which points to the TCD to be loaded into the eDMA engine from memory. */
|
|
handle->header = new_header;
|
|
/* Release TCD blocks. tcdUsed is the TCD number which can be used/loaded in the memory pool. */
|
|
handle->tcdUsed -= tcds_done;
|
|
/* Invoke callback function. */
|
|
if (handle->callback)
|
|
{
|
|
(handle->callback)(handle, handle->userData, transfer_done, tcds_done);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* 8 channels (Shared): kl28 */
|
|
#if defined(FSL_FEATURE_EDMA_MODULE_CHANNEL) && FSL_FEATURE_EDMA_MODULE_CHANNEL == 8U
|
|
|
|
void DMA0_04_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 0U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[0]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 4U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[4]);
|
|
}
|
|
}
|
|
|
|
void DMA0_15_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 1U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[1]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 5U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[5]);
|
|
}
|
|
}
|
|
|
|
void DMA0_26_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 2U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[2]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 6U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[6]);
|
|
}
|
|
}
|
|
|
|
void DMA0_37_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 3U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[3]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 7U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[7]);
|
|
}
|
|
}
|
|
|
|
#if defined(DMA1)
|
|
void DMA1_04_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA1, 0U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[8]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA1, 4U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[12]);
|
|
}
|
|
}
|
|
|
|
void DMA1_15_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA1, 1U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[9]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA1, 5U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[13]);
|
|
}
|
|
}
|
|
|
|
void DMA1_26_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA1, 2U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[10]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA1, 6U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[14]);
|
|
}
|
|
}
|
|
|
|
void DMA1_37_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA1, 3U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[11]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA1, 7U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[15]);
|
|
}
|
|
}
|
|
#endif
|
|
#endif /* 8 channels (Shared) */
|
|
|
|
/* 16 channels (Shared): K32H844P */
|
|
#if defined(FSL_FEATURE_EDMA_MODULE_CHANNEL) && FSL_FEATURE_EDMA_MODULE_CHANNEL == 16U
|
|
|
|
void DMA0_08_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 0U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[0]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 8U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[8]);
|
|
}
|
|
}
|
|
|
|
void DMA0_19_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 1U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[1]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 9U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[9]);
|
|
}
|
|
}
|
|
|
|
void DMA0_210_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 2U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[2]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 10U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[10]);
|
|
}
|
|
}
|
|
|
|
void DMA0_311_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 3U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[3]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 11U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[11]);
|
|
}
|
|
}
|
|
|
|
void DMA0_412_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 4U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[4]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 12U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[12]);
|
|
}
|
|
}
|
|
|
|
void DMA0_513_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 5U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[5]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 13U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[13]);
|
|
}
|
|
}
|
|
|
|
void DMA0_614_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 6U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[6]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 14U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[14]);
|
|
}
|
|
}
|
|
|
|
void DMA0_715_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 7U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[7]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 15U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[15]);
|
|
}
|
|
}
|
|
|
|
#if defined(DMA1)
|
|
void DMA1_08_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA1, 0U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[16]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA1, 8U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[24]);
|
|
}
|
|
}
|
|
|
|
void DMA1_19_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA1, 1U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[17]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA1, 9U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[25]);
|
|
}
|
|
}
|
|
|
|
void DMA1_210_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA1, 2U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[18]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA1, 10U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[26]);
|
|
}
|
|
}
|
|
|
|
void DMA1_311_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA1, 3U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[19]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA1, 11U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[27]);
|
|
}
|
|
}
|
|
|
|
void DMA1_412_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA1, 4U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[20]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA1, 12U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[28]);
|
|
}
|
|
}
|
|
|
|
void DMA1_513_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA1, 5U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[21]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA1, 13U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[29]);
|
|
}
|
|
}
|
|
|
|
void DMA1_614_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA1, 6U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[22]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA1, 14U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[30]);
|
|
}
|
|
}
|
|
|
|
void DMA1_715_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA1, 7U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[23]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA1, 15U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[31]);
|
|
}
|
|
}
|
|
#endif
|
|
#endif /* 16 channels (Shared) */
|
|
|
|
/* 32 channels (Shared): k80 */
|
|
#if defined(FSL_FEATURE_EDMA_MODULE_CHANNEL) && FSL_FEATURE_EDMA_MODULE_CHANNEL == 32U
|
|
|
|
void DMA0_DMA16_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 0U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[0]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 16U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[16]);
|
|
}
|
|
}
|
|
|
|
void DMA1_DMA17_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 1U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[1]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 17U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[17]);
|
|
}
|
|
}
|
|
|
|
void DMA2_DMA18_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 2U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[2]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 18U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[18]);
|
|
}
|
|
}
|
|
|
|
void DMA3_DMA19_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 3U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[3]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 19U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[19]);
|
|
}
|
|
}
|
|
|
|
void DMA4_DMA20_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 4U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[4]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 20U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[20]);
|
|
}
|
|
}
|
|
|
|
void DMA5_DMA21_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 5U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[5]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 21U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[21]);
|
|
}
|
|
}
|
|
|
|
void DMA6_DMA22_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 6U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[6]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 22U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[22]);
|
|
}
|
|
}
|
|
|
|
void DMA7_DMA23_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 7U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[7]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 23U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[23]);
|
|
}
|
|
}
|
|
|
|
void DMA8_DMA24_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 8U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[8]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 24U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[24]);
|
|
}
|
|
}
|
|
|
|
void DMA9_DMA25_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 9U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[9]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 25U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[25]);
|
|
}
|
|
}
|
|
|
|
void DMA10_DMA26_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 10U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[10]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 26U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[26]);
|
|
}
|
|
}
|
|
|
|
void DMA11_DMA27_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 11U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[11]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 27U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[27]);
|
|
}
|
|
}
|
|
|
|
void DMA12_DMA28_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 12U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[12]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 28U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[28]);
|
|
}
|
|
}
|
|
|
|
void DMA13_DMA29_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 13U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[13]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 29U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[29]);
|
|
}
|
|
}
|
|
|
|
void DMA14_DMA30_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 14U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[14]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 30U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[30]);
|
|
}
|
|
}
|
|
|
|
void DMA15_DMA31_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 15U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[15]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 31U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[31]);
|
|
}
|
|
}
|
|
#endif /* 32 channels (Shared) */
|
|
|
|
/* 32 channels (Shared): MCIMX7U5_M4 */
|
|
#if defined(FSL_FEATURE_EDMA_MODULE_CHANNEL) && FSL_FEATURE_EDMA_MODULE_CHANNEL == 32U
|
|
|
|
void DMA0_0_4_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 0U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[0]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 4U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[4]);
|
|
}
|
|
}
|
|
|
|
void DMA0_1_5_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 1U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[1]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 5U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[5]);
|
|
}
|
|
}
|
|
|
|
void DMA0_2_6_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 2U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[2]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 6U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[6]);
|
|
}
|
|
}
|
|
|
|
void DMA0_3_7_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 3U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[3]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 7U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[7]);
|
|
}
|
|
}
|
|
|
|
void DMA0_8_12_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 8U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[8]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 12U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[12]);
|
|
}
|
|
}
|
|
|
|
void DMA0_9_13_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 9U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[9]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 13U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[13]);
|
|
}
|
|
}
|
|
|
|
void DMA0_10_14_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 10U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[10]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 14U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[14]);
|
|
}
|
|
}
|
|
|
|
void DMA0_11_15_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 11U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[11]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 15U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[15]);
|
|
}
|
|
}
|
|
|
|
void DMA0_16_20_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 16U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[16]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 20U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[20]);
|
|
}
|
|
}
|
|
|
|
void DMA0_17_21_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 17U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[17]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 21U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[21]);
|
|
}
|
|
}
|
|
|
|
void DMA0_18_22_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 18U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[18]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 22U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[22]);
|
|
}
|
|
}
|
|
|
|
void DMA0_19_23_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 19U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[19]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 23U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[23]);
|
|
}
|
|
}
|
|
|
|
void DMA0_24_28_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 24U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[24]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 28U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[28]);
|
|
}
|
|
}
|
|
|
|
void DMA0_25_29_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 25U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[25]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 29U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[29]);
|
|
}
|
|
}
|
|
|
|
void DMA0_26_30_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 26U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[26]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 30U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[30]);
|
|
}
|
|
}
|
|
|
|
void DMA0_27_31_DriverIRQHandler(void)
|
|
{
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 27U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[27]);
|
|
}
|
|
if ((EDMA_GetChannelStatusFlags(DMA0, 31U) & kEDMA_InterruptFlag) != 0U)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[31]);
|
|
}
|
|
}
|
|
#endif /* 32 channels (Shared): MCIMX7U5 */
|
|
|
|
/* 4 channels (No Shared): kv10 */
|
|
#if defined(FSL_FEATURE_EDMA_MODULE_CHANNEL) && FSL_FEATURE_EDMA_MODULE_CHANNEL > 0
|
|
|
|
void DMA0_DriverIRQHandler(void)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[0]);
|
|
}
|
|
|
|
void DMA1_DriverIRQHandler(void)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[1]);
|
|
}
|
|
|
|
void DMA2_DriverIRQHandler(void)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[2]);
|
|
}
|
|
|
|
void DMA3_DriverIRQHandler(void)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[3]);
|
|
}
|
|
|
|
/* 8 channels (No Shared) */
|
|
#if defined(FSL_FEATURE_EDMA_MODULE_CHANNEL) && FSL_FEATURE_EDMA_MODULE_CHANNEL > 4U
|
|
|
|
void DMA4_DriverIRQHandler(void)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[4]);
|
|
}
|
|
|
|
void DMA5_DriverIRQHandler(void)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[5]);
|
|
}
|
|
|
|
void DMA6_DriverIRQHandler(void)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[6]);
|
|
}
|
|
|
|
void DMA7_DriverIRQHandler(void)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[7]);
|
|
}
|
|
#endif /* FSL_FEATURE_EDMA_MODULE_CHANNEL == 8 */
|
|
|
|
/* 16 channels (No Shared) */
|
|
#if defined(FSL_FEATURE_EDMA_MODULE_CHANNEL) && FSL_FEATURE_EDMA_MODULE_CHANNEL > 8U
|
|
|
|
void DMA8_DriverIRQHandler(void)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[8]);
|
|
}
|
|
|
|
void DMA9_DriverIRQHandler(void)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[9]);
|
|
}
|
|
|
|
void DMA10_DriverIRQHandler(void)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[10]);
|
|
}
|
|
|
|
void DMA11_DriverIRQHandler(void)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[11]);
|
|
}
|
|
|
|
void DMA12_DriverIRQHandler(void)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[12]);
|
|
}
|
|
|
|
void DMA13_DriverIRQHandler(void)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[13]);
|
|
}
|
|
|
|
void DMA14_DriverIRQHandler(void)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[14]);
|
|
}
|
|
|
|
void DMA15_DriverIRQHandler(void)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[15]);
|
|
}
|
|
#endif /* FSL_FEATURE_EDMA_MODULE_CHANNEL == 16 */
|
|
|
|
/* 32 channels (No Shared) */
|
|
#if defined(FSL_FEATURE_EDMA_MODULE_CHANNEL) && FSL_FEATURE_EDMA_MODULE_CHANNEL > 16U
|
|
|
|
void DMA16_DriverIRQHandler(void)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[16]);
|
|
}
|
|
|
|
void DMA17_DriverIRQHandler(void)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[17]);
|
|
}
|
|
|
|
void DMA18_DriverIRQHandler(void)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[18]);
|
|
}
|
|
|
|
void DMA19_DriverIRQHandler(void)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[19]);
|
|
}
|
|
|
|
void DMA20_DriverIRQHandler(void)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[20]);
|
|
}
|
|
|
|
void DMA21_DriverIRQHandler(void)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[21]);
|
|
}
|
|
|
|
void DMA22_DriverIRQHandler(void)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[22]);
|
|
}
|
|
|
|
void DMA23_DriverIRQHandler(void)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[23]);
|
|
}
|
|
|
|
void DMA24_DriverIRQHandler(void)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[24]);
|
|
}
|
|
|
|
void DMA25_DriverIRQHandler(void)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[25]);
|
|
}
|
|
|
|
void DMA26_DriverIRQHandler(void)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[26]);
|
|
}
|
|
|
|
void DMA27_DriverIRQHandler(void)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[27]);
|
|
}
|
|
|
|
void DMA28_DriverIRQHandler(void)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[28]);
|
|
}
|
|
|
|
void DMA29_DriverIRQHandler(void)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[29]);
|
|
}
|
|
|
|
void DMA30_DriverIRQHandler(void)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[30]);
|
|
}
|
|
|
|
void DMA31_DriverIRQHandler(void)
|
|
{
|
|
EDMA_HandleIRQ(s_EDMAHandle[31]);
|
|
}
|
|
#endif /* FSL_FEATURE_EDMA_MODULE_CHANNEL == 32 */
|
|
|
|
#endif /* 4/8/16/32 channels (No Shared) */
|