344 lines
11 KiB
C
344 lines
11 KiB
C
/*
|
|
* Copyright (c) 2015, Freescale Semiconductor, Inc.
|
|
* Copyright 2016-2017 NXP
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
*
|
|
* o Redistributions of source code must retain the above copyright notice, this list
|
|
* of conditions and the following disclaimer.
|
|
*
|
|
* o Redistributions in binary form must reproduce the above copyright notice, this
|
|
* list of conditions and the following disclaimer in the documentation and/or
|
|
* other materials provided with the distribution.
|
|
*
|
|
* o Neither the name of the copyright holder nor the names of its
|
|
* contributors may be used to endorse or promote products derived from this
|
|
* software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
|
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
|
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#ifndef _FSL_CMP_H_
|
|
#define _FSL_CMP_H_
|
|
|
|
#include "fsl_common.h"
|
|
|
|
/*!
|
|
* @addtogroup cmp
|
|
* @{
|
|
*/
|
|
|
|
|
|
/*******************************************************************************
|
|
* Definitions
|
|
******************************************************************************/
|
|
|
|
/*! @name Driver version */
|
|
/*@{*/
|
|
/*! @brief CMP driver version 2.0.0. */
|
|
#define FSL_CMP_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
|
|
/*@}*/
|
|
|
|
/*!
|
|
* @brief Interrupt enable/disable mask.
|
|
*/
|
|
enum _cmp_interrupt_enable
|
|
{
|
|
kCMP_OutputRisingInterruptEnable = CMP_SCR_IER_MASK, /*!< Comparator interrupt enable rising. */
|
|
kCMP_OutputFallingInterruptEnable = CMP_SCR_IEF_MASK, /*!< Comparator interrupt enable falling. */
|
|
};
|
|
|
|
/*!
|
|
* @brief Status flags' mask.
|
|
*/
|
|
enum _cmp_status_flags
|
|
{
|
|
kCMP_OutputRisingEventFlag = CMP_SCR_CFR_MASK, /*!< Rising-edge on the comparison output has occurred. */
|
|
kCMP_OutputFallingEventFlag = CMP_SCR_CFF_MASK, /*!< Falling-edge on the comparison output has occurred. */
|
|
kCMP_OutputAssertEventFlag = CMP_SCR_COUT_MASK, /*!< Return the current value of the analog comparator output. */
|
|
};
|
|
|
|
/*!
|
|
* @brief CMP Hysteresis mode.
|
|
*/
|
|
typedef enum _cmp_hysteresis_mode
|
|
{
|
|
kCMP_HysteresisLevel0 = 0U, /*!< Hysteresis level 0. */
|
|
kCMP_HysteresisLevel1 = 1U, /*!< Hysteresis level 1. */
|
|
kCMP_HysteresisLevel2 = 2U, /*!< Hysteresis level 2. */
|
|
kCMP_HysteresisLevel3 = 3U, /*!< Hysteresis level 3. */
|
|
} cmp_hysteresis_mode_t;
|
|
|
|
/*!
|
|
* @brief CMP Voltage Reference source.
|
|
*/
|
|
typedef enum _cmp_reference_voltage_source
|
|
{
|
|
kCMP_VrefSourceVin1 = 0U, /*!< Vin1 is selected as a resistor ladder network supply reference Vin. */
|
|
kCMP_VrefSourceVin2 = 1U, /*!< Vin2 is selected as a resistor ladder network supply reference Vin. */
|
|
} cmp_reference_voltage_source_t;
|
|
|
|
/*!
|
|
* @brief Configures the comparator.
|
|
*/
|
|
typedef struct _cmp_config
|
|
{
|
|
bool enableCmp; /*!< Enable the CMP module. */
|
|
cmp_hysteresis_mode_t hysteresisMode; /*!< CMP Hysteresis mode. */
|
|
bool enableHighSpeed; /*!< Enable High-speed (HS) comparison mode. */
|
|
bool enableInvertOutput; /*!< Enable the inverted comparator output. */
|
|
bool useUnfilteredOutput; /*!< Set the compare output(COUT) to equal COUTA(true) or COUT(false). */
|
|
bool enablePinOut; /*!< The comparator output is available on the associated pin. */
|
|
#if defined(FSL_FEATURE_CMP_HAS_TRIGGER_MODE) && FSL_FEATURE_CMP_HAS_TRIGGER_MODE
|
|
bool enableTriggerMode; /*!< Enable the trigger mode. */
|
|
#endif /* FSL_FEATURE_CMP_HAS_TRIGGER_MODE */
|
|
} cmp_config_t;
|
|
|
|
/*!
|
|
* @brief Configures the filter.
|
|
*/
|
|
typedef struct _cmp_filter_config
|
|
{
|
|
#if defined(FSL_FEATURE_CMP_HAS_EXTERNAL_SAMPLE_SUPPORT) && FSL_FEATURE_CMP_HAS_EXTERNAL_SAMPLE_SUPPORT
|
|
bool enableSample; /*!< Using the external SAMPLE as a sampling clock input or using a divided bus clock. */
|
|
#endif /* FSL_FEATURE_CMP_HAS_EXTERNAL_SAMPLE_SUPPORT */
|
|
uint8_t filterCount; /*!< Filter Sample Count. Available range is 1-7; 0 disables the filter.*/
|
|
uint8_t filterPeriod; /*!< Filter Sample Period. The divider to the bus clock. Available range is 0-255. */
|
|
} cmp_filter_config_t;
|
|
|
|
/*!
|
|
* @brief Configures the internal DAC.
|
|
*/
|
|
typedef struct _cmp_dac_config
|
|
{
|
|
cmp_reference_voltage_source_t referenceVoltageSource; /*!< Supply voltage reference source. */
|
|
uint8_t DACValue; /*!< Value for the DAC Output Voltage. Available range is 0-63.*/
|
|
} cmp_dac_config_t;
|
|
|
|
#if defined(__cplusplus)
|
|
extern "C" {
|
|
#endif
|
|
|
|
/*******************************************************************************
|
|
* API
|
|
******************************************************************************/
|
|
|
|
/*!
|
|
* @name Initialization
|
|
* @{
|
|
*/
|
|
|
|
/*!
|
|
* @brief Initializes the CMP.
|
|
*
|
|
* This function initializes the CMP module. The operations included are as follows.
|
|
* - Enabling the clock for CMP module.
|
|
* - Configuring the comparator.
|
|
* - Enabling the CMP module.
|
|
* Note that for some devices, multiple CMP instances share the same clock gate. In this case, to enable the clock for
|
|
* any instance enables all CMPs. See the appropriate MCU reference manual for the clock assignment of the CMP.
|
|
*
|
|
* @param base CMP peripheral base address.
|
|
* @param config Pointer to the configuration structure.
|
|
*/
|
|
void CMP_Init(CMP_Type *base, const cmp_config_t *config);
|
|
|
|
/*!
|
|
* @brief De-initializes the CMP module.
|
|
*
|
|
* This function de-initializes the CMP module. The operations included are as follows.
|
|
* - Disabling the CMP module.
|
|
* - Disabling the clock for CMP module.
|
|
*
|
|
* This function disables the clock for the CMP.
|
|
* Note that for some devices, multiple CMP instances share the same clock gate. In this case, before disabling the
|
|
* clock for the CMP, ensure that all the CMP instances are not used.
|
|
*
|
|
* @param base CMP peripheral base address.
|
|
*/
|
|
void CMP_Deinit(CMP_Type *base);
|
|
|
|
/*!
|
|
* @brief Enables/disables the CMP module.
|
|
*
|
|
* @param base CMP peripheral base address.
|
|
* @param enable Enables or disables the module.
|
|
*/
|
|
static inline void CMP_Enable(CMP_Type *base, bool enable)
|
|
{
|
|
if (enable)
|
|
{
|
|
base->CR1 |= CMP_CR1_EN_MASK;
|
|
}
|
|
else
|
|
{
|
|
base->CR1 &= ~CMP_CR1_EN_MASK;
|
|
}
|
|
}
|
|
|
|
/*!
|
|
* @brief Initializes the CMP user configuration structure.
|
|
*
|
|
* This function initializes the user configuration structure to these default values.
|
|
* @code
|
|
* config->enableCmp = true;
|
|
* config->hysteresisMode = kCMP_HysteresisLevel0;
|
|
* config->enableHighSpeed = false;
|
|
* config->enableInvertOutput = false;
|
|
* config->useUnfilteredOutput = false;
|
|
* config->enablePinOut = false;
|
|
* config->enableTriggerMode = false;
|
|
* @endcode
|
|
* @param config Pointer to the configuration structure.
|
|
*/
|
|
void CMP_GetDefaultConfig(cmp_config_t *config);
|
|
|
|
/*!
|
|
* @brief Sets the input channels for the comparator.
|
|
*
|
|
* This function sets the input channels for the comparator.
|
|
* Note that two input channels cannot be set the same way in the application. When the user selects the same input
|
|
* from the analog mux to the positive and negative port, the comparator is disabled automatically.
|
|
*
|
|
* @param base CMP peripheral base address.
|
|
* @param positiveChannel Positive side input channel number. Available range is 0-7.
|
|
* @param negativeChannel Negative side input channel number. Available range is 0-7.
|
|
*/
|
|
void CMP_SetInputChannels(CMP_Type *base, uint8_t positiveChannel, uint8_t negativeChannel);
|
|
|
|
/* @} */
|
|
|
|
/*!
|
|
* @name Advanced Features
|
|
* @{
|
|
*/
|
|
|
|
#if defined(FSL_FEATURE_CMP_HAS_DMA) && FSL_FEATURE_CMP_HAS_DMA
|
|
/*!
|
|
* @brief Enables/disables the DMA request for rising/falling events.
|
|
*
|
|
* This function enables/disables the DMA request for rising/falling events. Either event triggers the generation of
|
|
* the DMA request from CMP if the DMA feature is enabled. Both events are ignored for generating the DMA request from the CMP
|
|
* if the DMA is disabled.
|
|
*
|
|
* @param base CMP peripheral base address.
|
|
* @param enable Enables or disables the feature.
|
|
*/
|
|
void CMP_EnableDMA(CMP_Type *base, bool enable);
|
|
#endif /* FSL_FEATURE_CMP_HAS_DMA */
|
|
|
|
#if defined(FSL_FEATURE_CMP_HAS_WINDOW_MODE) && FSL_FEATURE_CMP_HAS_WINDOW_MODE
|
|
/*!
|
|
* @brief Enables/disables the window mode.
|
|
*
|
|
* @param base CMP peripheral base address.
|
|
* @param enable Enables or disables the feature.
|
|
*/
|
|
static inline void CMP_EnableWindowMode(CMP_Type *base, bool enable)
|
|
{
|
|
if (enable)
|
|
{
|
|
base->CR1 |= CMP_CR1_WE_MASK;
|
|
}
|
|
else
|
|
{
|
|
base->CR1 &= ~CMP_CR1_WE_MASK;
|
|
}
|
|
}
|
|
#endif /* FSL_FEATURE_CMP_HAS_WINDOW_MODE */
|
|
|
|
#if defined(FSL_FEATURE_CMP_HAS_PASS_THROUGH_MODE) && FSL_FEATURE_CMP_HAS_PASS_THROUGH_MODE
|
|
/*!
|
|
* @brief Enables/disables the pass through mode.
|
|
*
|
|
* @param base CMP peripheral base address.
|
|
* @param enable Enables or disables the feature.
|
|
*/
|
|
static inline void CMP_EnablePassThroughMode(CMP_Type *base, bool enable)
|
|
{
|
|
if (enable)
|
|
{
|
|
base->MUXCR |= CMP_MUXCR_PSTM_MASK;
|
|
}
|
|
else
|
|
{
|
|
base->MUXCR &= ~CMP_MUXCR_PSTM_MASK;
|
|
}
|
|
}
|
|
#endif /* FSL_FEATURE_CMP_HAS_PASS_THROUGH_MODE */
|
|
|
|
/*!
|
|
* @brief Configures the filter.
|
|
*
|
|
* @param base CMP peripheral base address.
|
|
* @param config Pointer to the configuration structure.
|
|
*/
|
|
void CMP_SetFilterConfig(CMP_Type *base, const cmp_filter_config_t *config);
|
|
|
|
/*!
|
|
* @brief Configures the internal DAC.
|
|
*
|
|
* @param base CMP peripheral base address.
|
|
* @param config Pointer to the configuration structure. "NULL" disables the feature.
|
|
*/
|
|
void CMP_SetDACConfig(CMP_Type *base, const cmp_dac_config_t *config);
|
|
|
|
/*!
|
|
* @brief Enables the interrupts.
|
|
*
|
|
* @param base CMP peripheral base address.
|
|
* @param mask Mask value for interrupts. See "_cmp_interrupt_enable".
|
|
*/
|
|
void CMP_EnableInterrupts(CMP_Type *base, uint32_t mask);
|
|
|
|
/*!
|
|
* @brief Disables the interrupts.
|
|
*
|
|
* @param base CMP peripheral base address.
|
|
* @param mask Mask value for interrupts. See "_cmp_interrupt_enable".
|
|
*/
|
|
void CMP_DisableInterrupts(CMP_Type *base, uint32_t mask);
|
|
|
|
/* @} */
|
|
|
|
/*!
|
|
* @name Results
|
|
* @{
|
|
*/
|
|
|
|
/*!
|
|
* @brief Gets the status flags.
|
|
*
|
|
* @param base CMP peripheral base address.
|
|
*
|
|
* @return Mask value for the asserted flags. See "_cmp_status_flags".
|
|
*/
|
|
uint32_t CMP_GetStatusFlags(CMP_Type *base);
|
|
|
|
/*!
|
|
* @brief Clears the status flags.
|
|
*
|
|
* @param base CMP peripheral base address.
|
|
* @param mask Mask value for the flags. See "_cmp_status_flags".
|
|
*/
|
|
void CMP_ClearStatusFlags(CMP_Type *base, uint32_t mask);
|
|
|
|
/* @} */
|
|
#if defined(__cplusplus)
|
|
}
|
|
#endif
|
|
/*!
|
|
* @}
|
|
*/
|
|
#endif /* _FSL_CMP_H_ */
|