rt-thread-official/bsp/swm320/libraries/SWM320_StdPeriph_Driver/SWM320_pwm.h

58 lines
2.8 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

#ifndef __SWM320_PWM_H__
#define __SWM320_PWM_H__
typedef struct
{
uint8_t clk_div; //PWM_CLKDIV_1、PWM_CLKDIV_8
uint8_t mode; //PWM_MODE_INDEP、PWM_MODE_COMPL、PWM_MODE_INDEP_CALIGN、PWM_MODE_COMPL_CALIGN
uint16_t cycleA; //A路周期
uint16_t hdutyA; //A路占空比
uint16_t deadzoneA; //A路死区时长取值0--1023
uint8_t initLevelA; //A路初始输出电平0 低电平 1 高电平
uint16_t cycleB; //B路周期
uint16_t hdutyB; //B路占空比
uint16_t deadzoneB; //B路死区时长取值0--1023
uint8_t initLevelB; //B路初始输出电平0 低电平 1 高电平
uint8_t HEndAIEn; //A路高电平结束中断使能
uint8_t NCycleAIEn; //A路新周期开始中断使能
uint8_t HEndBIEn; //B路高电平结束中断使能
uint8_t NCycleBIEn; //B路新周期开始中断使能
} PWM_InitStructure;
#define PWM_CLKDIV_1 0
#define PWM_CLKDIV_8 1
#define PWM_MODE_INDEP 0 //A路和B路为两路独立输出
#define PWM_MODE_COMPL 1 //A路和B路为一路互补输出
#define PWM_MODE_INDEP_CALIGN 3 //A路和B路为两路独立输出中心对齐
#define PWM_MODE_COMPL_CALIGN 4 //A路和B路为一路互补输出中心对齐
#define PWM_CH_A 0
#define PWM_CH_B 1
void PWM_Init(PWM_TypeDef *PWMx, PWM_InitStructure *initStruct); //PWM初始化
void PWM_Start(PWM_TypeDef *PWMx, uint32_t chA, uint32_t chB); //启动PWM开始PWM输出
void PWM_Stop(PWM_TypeDef *PWMx, uint32_t chA, uint32_t chB); //关闭PWM停止PWM输出
void PWM_SetCycle(PWM_TypeDef *PWMx, uint32_t chn, uint16_t cycle); //设置周期
uint16_t PWM_GetCycle(PWM_TypeDef *PWMx, uint32_t chn); //获取周期
void PWM_SetHDuty(PWM_TypeDef *PWMx, uint32_t chn, uint16_t hduty); //设置高电平时长
uint16_t PWM_GetHDuty(PWM_TypeDef *PWMx, uint32_t chn); //获取高电平时长
void PWM_SetDeadzone(PWM_TypeDef *PWMx, uint32_t chn, uint8_t deadzone); //设置死区时长
uint8_t PWM_GetDeadzone(PWM_TypeDef *PWMx, uint32_t chn); //获取死区时长
void PWM_IntNCycleEn(PWM_TypeDef *PWMx, uint32_t chn); //新周期开始中断使能
void PWM_IntNCycleDis(PWM_TypeDef *PWMx, uint32_t chn); //新周期开始中断禁能
void PWM_IntNCycleClr(PWM_TypeDef *PWMx, uint32_t chn); //新周期开始中断标志清除
uint32_t PWM_IntNCycleStat(PWM_TypeDef *PWMx, uint32_t chn); //新周期开始中断是否发生
void PWM_IntHEndEn(PWM_TypeDef *PWMx, uint32_t chn); //高电平结束中断使能
void PWM_IntHEndDis(PWM_TypeDef *PWMx, uint32_t chn); //高电平结束中断禁能
void PWM_IntHEndClr(PWM_TypeDef *PWMx, uint32_t chn); //高电平结束中断标志清除
uint32_t PWM_IntHEndStat(PWM_TypeDef *PWMx, uint32_t chn); //高电平结束中断是否发生
#endif //__SWM320_PWM_H__