rt-thread-official/bsp/apollo2/libraries/drivers/hal/am_hal_ttp.c

206 lines
6.0 KiB
C

//*****************************************************************************
//
// am_hal_ttp.c
//! @file
//!
//! @brief Functions for handling the "two time program" interface.
//!
//
//*****************************************************************************
//*****************************************************************************
//
// Copyright (c) 2017, Ambiq Micro
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are met:
//
// 1. Redistributions of source code must retain the above copyright notice,
// this list of conditions and the following disclaimer.
//
// 2. Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
//
// 3. Neither the name of the copyright holder nor the names of its
// contributors may be used to endorse or promote products derived from this
// software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
// POSSIBILITY OF SUCH DAMAGE.
//
// This is part of revision 1.2.11 of the AmbiqSuite Development Package.
//
//*****************************************************************************
#include "am_mcu_apollo.h"
#include "am_hal_ttp.h"
//*****************************************************************************
//
// Local constants
//
//*****************************************************************************
#define TTP_ADDR 0x50020000
//*****************************************************************************
//
// Local prototypes
//
//*****************************************************************************
#if !defined(__GNUC__)
void __breakpoint(int val);
#endif
//*****************************************************************************
//
// A function to verify that the TTP was saved and/or restored properly.
//
//*****************************************************************************
int
verifyTTPSaved(uint32_t *pSaveArray, int iNumWords)
{
int ix, iErrCnt = 0;
uint32_t *pDataSpace = (uint32_t*)TTP_ADDR;
for (ix = 0; ix<iNumWords; ix++)
{
if ( *pSaveArray != am_hal_flash_load_ui32((uint32_t)pDataSpace) )
{
iErrCnt++;
}
pSaveArray++;
pDataSpace++;
}
//
// Hopefully returning 0.
//
return iErrCnt;
}
//*****************************************************************************
//
//! @brief TTP unlock.
//!
//! @param ui32Keyval - The key value to unlock the interface.
//! @param pui8_1024Bytes - A pointer to a 1024 bytes array, used for
//! temporary data storage.
//! WARNING This area must be 32-bit aligned and at
//! least 1024 bytes long.
//!
//! This function is used to unlock the TTP ability.
//!
//! @return None.
//
//*****************************************************************************
int
am_hal_ttp_unlock(uint32_t ui32Keyval, uint8_t *pui8_1024Bytes)
{
int iErrCnt = 0;
int ix, iRet;
int iNumWords = 1024 / 4;
uint32_t *pSaveArray, *pDataSpace;
int (*pTTPClear)(uint32_t, uint32_t) = (int (*)(uint32_t, uint32_t))0x080002EF;
int (*pTTPSet)(uint32_t, uint32_t, uint32_t*, uint32_t, uint32_t) =
(int (*)(uint32_t, uint32_t, uint32_t*, uint32_t, uint32_t))0x080006FF;
//
// Save off the data.
//
pSaveArray = (uint32_t*)pui8_1024Bytes;
pDataSpace = (uint32_t*)TTP_ADDR;
for (ix = 0; ix < iNumWords; ix++)
{
*pSaveArray = am_hal_flash_load_ui32((uint32_t)pDataSpace);
pSaveArray++;
pDataSpace++;
}
//
// Before proceeding, make sure that we captured the data correctly.
//
iErrCnt += verifyTTPSaved((uint32_t*)pui8_1024Bytes, iNumWords);
if ( iErrCnt )
{
return 0x10000001;
}
//
// Erase the TTP area.
//
iRet = (*pTTPClear)(0, ui32Keyval);
if ( iRet != 0 )
{
iErrCnt++;
return 0x10000002;
}
//
// The point of no return! The TTP space is successfully erased.
// Let's make sure.
//
pDataSpace = (uint32_t*)TTP_ADDR;
for (ix = 0; ix < iNumWords; ix++)
{
if ( am_hal_flash_load_ui32((uint32_t)pDataSpace) != 0xffffffff )
{
iErrCnt++;
}
pDataSpace++;
}
if ( iErrCnt )
{
return 0x10000003;
}
//
// Restore the TTP block from the saved data.
//
iRet = (*pTTPSet)(ui32Keyval, 0, (uint32_t*)pui8_1024Bytes, 0, iNumWords);
if ( iRet != 0 )
{
iErrCnt++;
return 0x10000004;
}
//
// Now, check the restored INFO data.
//
iRet = verifyTTPSaved((uint32_t*)pui8_1024Bytes, iNumWords);
if ( iRet )
{
iErrCnt++;
return 0x10000005;
}
else
{
//
// All good. The device was successfully recovered.
//
}
//
// Return with error count (hopefully 0).
//
return iErrCnt;
}
//*****************************************************************************
//
// End Doxygen group.
//! @}
//
//*****************************************************************************