161 lines
8.3 KiB
C
161 lines
8.3 KiB
C
/*!
|
|
\file gd32f30x_pmu.h
|
|
\brief definitions for the PMU
|
|
*/
|
|
|
|
/*
|
|
Copyright (C) 2017 GigaDevice
|
|
|
|
2017-02-10, V1.0.0, firmware for GD32F30x
|
|
*/
|
|
|
|
#ifndef GD32F30X_PMU_H
|
|
#define GD32F30X_PMU_H
|
|
|
|
#include "gd32f30x.h"
|
|
|
|
/* PMU definitions */
|
|
#define PMU PMU_BASE /*!< PMU base address */
|
|
|
|
/* registers definitions */
|
|
#define PMU_CTL REG32((PMU) + 0x00U) /*!< PMU control register */
|
|
#define PMU_CS REG32((PMU) + 0x04U) /*!< PMU control and status register */
|
|
|
|
/* bits definitions */
|
|
/* PMU_CTL */
|
|
#define PMU_CTL_LDOLP BIT(0) /*!< LDO low power mode */
|
|
#define PMU_CTL_STBMOD BIT(1) /*!< standby mode */
|
|
#define PMU_CTL_WURST BIT(2) /*!< wakeup flag reset */
|
|
#define PMU_CTL_STBRST BIT(3) /*!< standby flag reset */
|
|
#define PMU_CTL_LVDEN BIT(4) /*!< low voltage detector enable */
|
|
#define PMU_CTL_LVDT BITS(5,7) /*!< low voltage detector threshold */
|
|
#define PMU_CTL_BKPWEN BIT(8) /*!< backup domain write enable */
|
|
#define PMU_CTL_LDLP BIT(10) /*!< low-driver mode when use low power LDO */
|
|
#define PMU_CTL_LDNP BIT(11) /*!< low-driver mode when use normal power LDO */
|
|
#define PMU_CTL_LDOVS BITS(14,15) /*!< LDO output voltage select */
|
|
#define PMU_CTL_HDEN BIT(16) /*!< high-driver mode enable */
|
|
#define PMU_CTL_HDS BIT(17) /*!< high-driver mode switch */
|
|
#define PMU_CTL_LDEN BITS(18,19) /*!< low-driver mode enable in deep-sleep mode */
|
|
|
|
/* PMU_CS */
|
|
#define PMU_CS_WUF BIT(0) /*!< wakeup flag */
|
|
#define PMU_CS_STBF BIT(1) /*!< standby flag */
|
|
#define PMU_CS_LVDF BIT(2) /*!< low voltage detector status flag */
|
|
#define PMU_CS_WUPEN BIT(8) /*!< wakeup pin enable */
|
|
#define PMU_CS_LDOVSRF BIT(14) /*!< LDO voltage select ready flag */
|
|
#define PMU_CS_HDRF BIT(16) /*!< high-driver ready flag */
|
|
#define PMU_CS_HDSRF BIT(17) /*!< high-driver switch ready flag */
|
|
#define PMU_CS_LDRF BITS(18,19) /*!< Low-driver mode ready flag */
|
|
|
|
/* constants definitions */
|
|
/* PMU low voltage detector threshold definitions */
|
|
#define CTL_LVDT(regval) (BITS(5,7)&((uint32_t)(regval)<<5))
|
|
#define PMU_LVDT_0 CTL_LVDT(0) /*!< voltage threshold is 2.1V */
|
|
#define PMU_LVDT_1 CTL_LVDT(1) /*!< voltage threshold is 2.3V */
|
|
#define PMU_LVDT_2 CTL_LVDT(2) /*!< voltage threshold is 2.4V */
|
|
#define PMU_LVDT_3 CTL_LVDT(3) /*!< voltage threshold is 2.6V */
|
|
#define PMU_LVDT_4 CTL_LVDT(4) /*!< voltage threshold is 2.7V */
|
|
#define PMU_LVDT_5 CTL_LVDT(5) /*!< voltage threshold is 2.9V */
|
|
#define PMU_LVDT_6 CTL_LVDT(6) /*!< voltage threshold is 3.0V */
|
|
#define PMU_LVDT_7 CTL_LVDT(7) /*!< voltage threshold is 3.1V */
|
|
|
|
/* PMU LDO output voltage select definitions */
|
|
#define CTL_LDOVS(regval) (BITS(14,15)&((uint32_t)(regval)<<14))
|
|
#define PMU_LDOVS_LOW CTL_LDOVS(1) /*!< LDO output voltage low mode */
|
|
#define PMU_LDOVS_MID CTL_LDOVS(2) /*!< LDO output voltage mid mode */
|
|
#define PMU_LDOVS_HIGH CTL_LDOVS(3) /*!< LDO output voltage high mode */
|
|
|
|
/* PMU high-driver mode switch */
|
|
#define CTL_HDS(regval) (BIT(17)&((uint32_t)(regval)<<17))
|
|
#define PMU_HIGHDR_SWITCH_NONE CTL_HDS(0) /*!< no high-driver mode switch */
|
|
#define PMU_HIGHDR_SWITCH_EN CTL_HDS(1) /*!< high-driver mode switch */
|
|
|
|
/* PMU low-driver mode when use low power LDO */
|
|
#define CTL_LDLP(regval) (BIT(10)&((uint32_t)(regval)<<10))
|
|
#define PMU_NORMALDR_LOWPWR CTL_LDLP(0) /*!< normal driver when use low power LDO */
|
|
#define PMU_LOWDR_LOWPWR CTL_LDLP(1) /*!< low-driver mode enabled when LDEN is 11 and use low power LDO */
|
|
|
|
/* PMU low-driver mode when use normal power LDO */
|
|
#define CTL_LDNP(regval) (BIT(11)&((uint32_t)(regval)<<11))
|
|
#define PMU_NORMALDR_NORMALPWR CTL_LDNP(0) /*!< normal driver when use normal power LDO */
|
|
#define PMU_LOWDR_NORMALPWR CTL_LDNP(1) /*!< low-driver mode enabled when LDEN is 11 and use normal power LDO */
|
|
|
|
/* PMU low power mode ready flag definitions */
|
|
#define CS_LDRF(regval) (BITS(18,19)&((uint32_t)(regval)<<18))
|
|
#define PMU_LDRF_NORMAL CS_LDRF(0) /*!< normal driver in deep-sleep mode */
|
|
#define PMU_LDRF_LOWDRIVER CS_LDRF(3) /*!< low-driver mode in deep-sleep mode */
|
|
|
|
/* PMU flag definitions */
|
|
#define PMU_FLAG_WAKEUP PMU_CS_WUF /*!< wakeup flag status */
|
|
#define PMU_FLAG_STANDBY PMU_CS_STBF /*!< standby flag status */
|
|
#define PMU_FLAG_LVD PMU_CS_LVDF /*!< lvd flag status */
|
|
#define PMU_FLAG_LDOVSRF PMU_CS_LDOVSRF /*!< LDO voltage select ready flag */
|
|
#define PMU_FLAG_HDRF PMU_CS_HDRF /*!< high-driver ready flag */
|
|
#define PMU_FLAG_HDSRF PMU_CS_HDSRF /*!< high-driver switch ready flag */
|
|
#define PMU_FLAG_LDRF PMU_CS_LDRF /*!< low-driver mode ready flag */
|
|
|
|
/* PMU ldo definitions */
|
|
#define PMU_LDO_NORMAL ((uint32_t)0x00000000U) /*!< LDO normal work when PMU enter deepsleep mode */
|
|
#define PMU_LDO_LOWPOWER PMU_CTL_LDOLP /*!< LDO work at low power status when PMU enter deepsleep mode */
|
|
|
|
/* PMU flag reset definitions */
|
|
#define PMU_FLAG_RESET_WAKEUP ((uint8_t)0x00U) /*!< wakeup flag reset */
|
|
#define PMU_FLAG_RESET_STANDBY ((uint8_t)0x01U) /*!< standby flag reset */
|
|
|
|
/* PMU command constants definitions */
|
|
#define WFI_CMD ((uint8_t)0x00U) /*!< use WFI command */
|
|
#define WFE_CMD ((uint8_t)0x01U) /*!< use WFE command */
|
|
|
|
/* function declarations */
|
|
/* reset PMU registers */
|
|
void pmu_deinit(void);
|
|
|
|
/* select low voltage detector threshold */
|
|
void pmu_lvd_select(uint32_t lvdt_n);
|
|
/* select LDO output voltage */
|
|
void pmu_ldo_output_select(uint32_t ldo_output);
|
|
/* disable PMU lvd */
|
|
void pmu_lvd_disable(void);
|
|
|
|
/* functions of low-driver mode and high-driver mode in deep-sleep mode */
|
|
/* switch high-driver mode */
|
|
void pmu_highdriver_switch_select(uint32_t highdr_switch);
|
|
/* enable high-driver mode */
|
|
void pmu_highdriver_mode_enable(void);
|
|
/* disable high-driver mode */
|
|
void pmu_highdriver_mode_disable(void);
|
|
/* enable low-driver mode in deep-sleep mode */
|
|
void pmu_lowdriver_mode_enable(void);
|
|
/* disable low-driver mode in deep-sleep mode */
|
|
void pmu_lowdriver_mode_disable(void);
|
|
/* in deep-sleep mode, driver mode when use low power LDO */
|
|
void pmu_lowpower_driver_config(uint32_t mode);
|
|
/* in deep-sleep mode, driver mode when use normal power LDO */
|
|
void pmu_normalpower_driver_config(uint32_t mode);
|
|
|
|
/* set PMU mode */
|
|
/* PMU work at sleep mode */
|
|
void pmu_to_sleepmode(uint8_t sleepmodecmd);
|
|
/* PMU work at deepsleep mode */
|
|
void pmu_to_deepsleepmode(uint32_t ldo, uint8_t deepsleepmodecmd);
|
|
/* PMU work at standby mode */
|
|
void pmu_to_standbymode(uint8_t standbymodecmd);
|
|
/* enable PMU wakeup pin */
|
|
void pmu_wakeup_pin_enable(void);
|
|
/* disable PMU wakeup pin */
|
|
void pmu_wakeup_pin_disable(void);
|
|
|
|
/* backup related functions */
|
|
/* enable backup domain write */
|
|
void pmu_backup_write_enable(void);
|
|
/* disable backup domain write */
|
|
void pmu_backup_write_disable(void);
|
|
|
|
/* flag functions */
|
|
/* clear flag bit */
|
|
void pmu_flag_clear(uint32_t flag_reset);
|
|
/* get flag state */
|
|
FlagStatus pmu_flag_get(uint32_t flag);
|
|
|
|
#endif /* GD32F30X_PMU_H */
|