libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity
rt-thread-official/bsp/frdm-k64f/device/MK64F12/MK64F12_mcm.h

1165 lines
40 KiB
C
Raw Blame History

/*
* Copyright (c) 2014, Freescale Semiconductor, Inc.
* All rights reserved.
*
* THIS SOFTWARE IS PROVIDED BY FREESCALE "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
* SHALL FREESCALE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
* OF SUCH DAMAGE.
*/
/*
* WARNING! DO NOT EDIT THIS FILE DIRECTLY!
*
* This file was generated automatically and any changes may be lost.
*/
#ifndef __HW_MCM_REGISTERS_H__
#define __HW_MCM_REGISTERS_H__
#include "regs.h"
/*
* MK64F12 MCM
*
* Core Platform Miscellaneous Control Module
*
* Registers defined in this header file:
* - HW_MCM_PLASC - Crossbar Switch (AXBS) Slave Configuration
* - HW_MCM_PLAMC - Crossbar Switch (AXBS) Master Configuration
* - HW_MCM_CR - Control Register
* - HW_MCM_ISR - Interrupt Status Register
* - HW_MCM_ETBCC - ETB Counter Control register
* - HW_MCM_ETBRL - ETB Reload register
* - HW_MCM_ETBCNT - ETB Counter Value register
* - HW_MCM_PID - Process ID register
*
* - hw_mcm_t - Struct containing all module registers.
*/
//! @name Module base addresses
//@{
#ifndef REGS_MCM_BASE
#define HW_MCM_INSTANCE_COUNT (1U) //!< Number of instances of the MCM module.
#define REGS_MCM_BASE (0xE0080000U) //!< Base address for MCM.
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_MCM_PLASC - Crossbar Switch (AXBS) Slave Configuration
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_MCM_PLASC - Crossbar Switch (AXBS) Slave Configuration (RO)
*
* Reset value: 0x001FU
*
* PLASC is a 16-bit read-only register identifying the presence/absence of bus
* slave connections to the device's crossbar switch.
*/
typedef union _hw_mcm_plasc
{
uint16_t U;
struct _hw_mcm_plasc_bitfields
{
uint16_t ASC : 8; //!< [7:0] Each bit in the ASC field indicates
//! whether there is a corresponding connection to the crossbar switch's slave
//! input port.
uint16_t RESERVED0 : 8; //!< [15:8]
} B;
} hw_mcm_plasc_t;
#endif
/*!
* @name Constants and macros for entire MCM_PLASC register
*/
//@{
#define HW_MCM_PLASC_ADDR (REGS_MCM_BASE + 0x8U)
#ifndef __LANGUAGE_ASM__
#define HW_MCM_PLASC (*(__I hw_mcm_plasc_t *) HW_MCM_PLASC_ADDR)
#define HW_MCM_PLASC_RD() (HW_MCM_PLASC.U)
#endif
//@}
/*
* Constants & macros for individual MCM_PLASC bitfields
*/
/*!
* @name Register MCM_PLASC, field ASC[7:0] (RO)
*
* Values:
* - 0 - A bus slave connection to AXBS input port n is absent
* - 1 - A bus slave connection to AXBS input port n is present
*/
//@{
#define BP_MCM_PLASC_ASC (0U) //!< Bit position for MCM_PLASC_ASC.
#define BM_MCM_PLASC_ASC (0x00FFU) //!< Bit mask for MCM_PLASC_ASC.
#define BS_MCM_PLASC_ASC (8U) //!< Bit field size in bits for MCM_PLASC_ASC.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_PLASC_ASC field.
#define BR_MCM_PLASC_ASC (HW_MCM_PLASC.B.ASC)
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_MCM_PLAMC - Crossbar Switch (AXBS) Master Configuration
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_MCM_PLAMC - Crossbar Switch (AXBS) Master Configuration (RO)
*
* Reset value: 0x0037U
*
* PLAMC is a 16-bit read-only register identifying the presence/absence of bus
* master connections to the device's crossbar switch.
*/
typedef union _hw_mcm_plamc
{
uint16_t U;
struct _hw_mcm_plamc_bitfields
{
uint16_t AMC : 8; //!< [7:0] Each bit in the AMC field indicates
//! whether there is a corresponding connection to the AXBS master input port.
uint16_t RESERVED0 : 8; //!< [15:8]
} B;
} hw_mcm_plamc_t;
#endif
/*!
* @name Constants and macros for entire MCM_PLAMC register
*/
//@{
#define HW_MCM_PLAMC_ADDR (REGS_MCM_BASE + 0xAU)
#ifndef __LANGUAGE_ASM__
#define HW_MCM_PLAMC (*(__I hw_mcm_plamc_t *) HW_MCM_PLAMC_ADDR)
#define HW_MCM_PLAMC_RD() (HW_MCM_PLAMC.U)
#endif
//@}
/*
* Constants & macros for individual MCM_PLAMC bitfields
*/
/*!
* @name Register MCM_PLAMC, field AMC[7:0] (RO)
*
* Values:
* - 0 - A bus master connection to AXBS input port n is absent
* - 1 - A bus master connection to AXBS input port n is present
*/
//@{
#define BP_MCM_PLAMC_AMC (0U) //!< Bit position for MCM_PLAMC_AMC.
#define BM_MCM_PLAMC_AMC (0x00FFU) //!< Bit mask for MCM_PLAMC_AMC.
#define BS_MCM_PLAMC_AMC (8U) //!< Bit field size in bits for MCM_PLAMC_AMC.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_PLAMC_AMC field.
#define BR_MCM_PLAMC_AMC (HW_MCM_PLAMC.B.AMC)
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_MCM_CR - Control Register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_MCM_CR - Control Register (RW)
*
* Reset value: 0x00000000U
*
* CR defines the arbitration and protection schemes for the two system RAM
* arrays.
*/
typedef union _hw_mcm_cr
{
uint32_t U;
struct _hw_mcm_cr_bitfields
{
uint32_t RESERVED0 : 24; //!< [23:0]
uint32_t SRAMUAP : 2; //!< [25:24] SRAM_U arbitration priority
uint32_t SRAMUWP : 1; //!< [26] SRAM_U write protect
uint32_t RESERVED1 : 1; //!< [27]
uint32_t SRAMLAP : 2; //!< [29:28] SRAM_L arbitration priority
uint32_t SRAMLWP : 1; //!< [30] SRAM_L Write Protect
uint32_t RESERVED2 : 1; //!< [31]
} B;
} hw_mcm_cr_t;
#endif
/*!
* @name Constants and macros for entire MCM_CR register
*/
//@{
#define HW_MCM_CR_ADDR (REGS_MCM_BASE + 0xCU)
#ifndef __LANGUAGE_ASM__
#define HW_MCM_CR (*(__IO hw_mcm_cr_t *) HW_MCM_CR_ADDR)
#define HW_MCM_CR_RD() (HW_MCM_CR.U)
#define HW_MCM_CR_WR(v) (HW_MCM_CR.U = (v))
#define HW_MCM_CR_SET(v) (HW_MCM_CR_WR(HW_MCM_CR_RD() | (v)))
#define HW_MCM_CR_CLR(v) (HW_MCM_CR_WR(HW_MCM_CR_RD() & ~(v)))
#define HW_MCM_CR_TOG(v) (HW_MCM_CR_WR(HW_MCM_CR_RD() ^ (v)))
#endif
//@}
/*
* Constants & macros for individual MCM_CR bitfields
*/
/*!
* @name Register MCM_CR, field SRAMUAP[25:24] (RW)
*
* Defines the arbitration scheme and priority for the processor and SRAM
* backdoor accesses to the SRAM_U array.
*
* Values:
* - 00 - Round robin
* - 01 - Special round robin (favors SRAM backoor accesses over the processor)
* - 10 - Fixed priority. Processor has highest, backdoor has lowest
* - 11 - Fixed priority. Backdoor has highest, processor has lowest
*/
//@{
#define BP_MCM_CR_SRAMUAP (24U) //!< Bit position for MCM_CR_SRAMUAP.
#define BM_MCM_CR_SRAMUAP (0x03000000U) //!< Bit mask for MCM_CR_SRAMUAP.
#define BS_MCM_CR_SRAMUAP (2U) //!< Bit field size in bits for MCM_CR_SRAMUAP.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_CR_SRAMUAP field.
#define BR_MCM_CR_SRAMUAP (HW_MCM_CR.B.SRAMUAP)
#endif
//! @brief Format value for bitfield MCM_CR_SRAMUAP.
#define BF_MCM_CR_SRAMUAP(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MCM_CR_SRAMUAP), uint32_t) & BM_MCM_CR_SRAMUAP)
#ifndef __LANGUAGE_ASM__
//! @brief Set the SRAMUAP field to a new value.
#define BW_MCM_CR_SRAMUAP(v) (HW_MCM_CR_WR((HW_MCM_CR_RD() & ~BM_MCM_CR_SRAMUAP) | BF_MCM_CR_SRAMUAP(v)))
#endif
//@}
/*!
* @name Register MCM_CR, field SRAMUWP[26] (RW)
*
* When this bit is set, writes to SRAM_U array generates a bus error.
*/
//@{
#define BP_MCM_CR_SRAMUWP (26U) //!< Bit position for MCM_CR_SRAMUWP.
#define BM_MCM_CR_SRAMUWP (0x04000000U) //!< Bit mask for MCM_CR_SRAMUWP.
#define BS_MCM_CR_SRAMUWP (1U) //!< Bit field size in bits for MCM_CR_SRAMUWP.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_CR_SRAMUWP field.
#define BR_MCM_CR_SRAMUWP (BITBAND_ACCESS32(HW_MCM_CR_ADDR, BP_MCM_CR_SRAMUWP))
#endif
//! @brief Format value for bitfield MCM_CR_SRAMUWP.
#define BF_MCM_CR_SRAMUWP(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MCM_CR_SRAMUWP), uint32_t) & BM_MCM_CR_SRAMUWP)
#ifndef __LANGUAGE_ASM__
//! @brief Set the SRAMUWP field to a new value.
#define BW_MCM_CR_SRAMUWP(v) (BITBAND_ACCESS32(HW_MCM_CR_ADDR, BP_MCM_CR_SRAMUWP) = (v))
#endif
//@}
/*!
* @name Register MCM_CR, field SRAMLAP[29:28] (RW)
*
* Defines the arbitration scheme and priority for the processor and SRAM
* backdoor accesses to the SRAM_L array.
*
* Values:
* - 00 - Round robin
* - 01 - Special round robin (favors SRAM backoor accesses over the processor)
* - 10 - Fixed priority. Processor has highest, backdoor has lowest
* - 11 - Fixed priority. Backdoor has highest, processor has lowest
*/
//@{
#define BP_MCM_CR_SRAMLAP (28U) //!< Bit position for MCM_CR_SRAMLAP.
#define BM_MCM_CR_SRAMLAP (0x30000000U) //!< Bit mask for MCM_CR_SRAMLAP.
#define BS_MCM_CR_SRAMLAP (2U) //!< Bit field size in bits for MCM_CR_SRAMLAP.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_CR_SRAMLAP field.
#define BR_MCM_CR_SRAMLAP (HW_MCM_CR.B.SRAMLAP)
#endif
//! @brief Format value for bitfield MCM_CR_SRAMLAP.
#define BF_MCM_CR_SRAMLAP(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MCM_CR_SRAMLAP), uint32_t) & BM_MCM_CR_SRAMLAP)
#ifndef __LANGUAGE_ASM__
//! @brief Set the SRAMLAP field to a new value.
#define BW_MCM_CR_SRAMLAP(v) (HW_MCM_CR_WR((HW_MCM_CR_RD() & ~BM_MCM_CR_SRAMLAP) | BF_MCM_CR_SRAMLAP(v)))
#endif
//@}
/*!
* @name Register MCM_CR, field SRAMLWP[30] (RW)
*
* When this bit is set, writes to SRAM_L array generates a bus error.
*/
//@{
#define BP_MCM_CR_SRAMLWP (30U) //!< Bit position for MCM_CR_SRAMLWP.
#define BM_MCM_CR_SRAMLWP (0x40000000U) //!< Bit mask for MCM_CR_SRAMLWP.
#define BS_MCM_CR_SRAMLWP (1U) //!< Bit field size in bits for MCM_CR_SRAMLWP.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_CR_SRAMLWP field.
#define BR_MCM_CR_SRAMLWP (BITBAND_ACCESS32(HW_MCM_CR_ADDR, BP_MCM_CR_SRAMLWP))
#endif
//! @brief Format value for bitfield MCM_CR_SRAMLWP.
#define BF_MCM_CR_SRAMLWP(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MCM_CR_SRAMLWP), uint32_t) & BM_MCM_CR_SRAMLWP)
#ifndef __LANGUAGE_ASM__
//! @brief Set the SRAMLWP field to a new value.
#define BW_MCM_CR_SRAMLWP(v) (BITBAND_ACCESS32(HW_MCM_CR_ADDR, BP_MCM_CR_SRAMLWP) = (v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_MCM_ISR - Interrupt Status Register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_MCM_ISR - Interrupt Status Register (RW)
*
* Reset value: 0x00000000U
*/
typedef union _hw_mcm_isr
{
uint32_t U;
struct _hw_mcm_isr_bitfields
{
uint32_t RESERVED0 : 1; //!< [0]
uint32_t IRQ : 1; //!< [1] Normal Interrupt Pending
uint32_t NMI : 1; //!< [2] Non-maskable Interrupt Pending
uint32_t DHREQ : 1; //!< [3] Debug Halt Request Indicator
uint32_t RESERVED1 : 4; //!< [7:4]
uint32_t FIOC : 1; //!< [8] FPU invalid operation interrupt status
uint32_t FDZC : 1; //!< [9] FPU divide-by-zero interrupt status
uint32_t FOFC : 1; //!< [10] FPU overflow interrupt status
uint32_t FUFC : 1; //!< [11] FPU underflow interrupt status
uint32_t FIXC : 1; //!< [12] FPU inexact interrupt status
uint32_t RESERVED2 : 2; //!< [14:13]
uint32_t FIDC : 1; //!< [15] FPU input denormal interrupt status
uint32_t RESERVED3 : 8; //!< [23:16]
uint32_t FIOCE : 1; //!< [24] FPU invalid operation interrupt enable
uint32_t FDZCE : 1; //!< [25] FPU divide-by-zero interrupt enable
uint32_t FOFCE : 1; //!< [26] FPU overflow interrupt enable
uint32_t FUFCE : 1; //!< [27] FPU underflow interrupt enable
uint32_t FIXCE : 1; //!< [28] FPU inexact interrupt enable
uint32_t RESERVED4 : 2; //!< [30:29]
uint32_t FIDCE : 1; //!< [31] FPU input denormal interrupt enable
} B;
} hw_mcm_isr_t;
#endif
/*!
* @name Constants and macros for entire MCM_ISR register
*/
//@{
#define HW_MCM_ISR_ADDR (REGS_MCM_BASE + 0x10U)
#ifndef __LANGUAGE_ASM__
#define HW_MCM_ISR (*(__IO hw_mcm_isr_t *) HW_MCM_ISR_ADDR)
#define HW_MCM_ISR_RD() (HW_MCM_ISR.U)
#define HW_MCM_ISR_WR(v) (HW_MCM_ISR.U = (v))
#define HW_MCM_ISR_SET(v) (HW_MCM_ISR_WR(HW_MCM_ISR_RD() | (v)))
#define HW_MCM_ISR_CLR(v) (HW_MCM_ISR_WR(HW_MCM_ISR_RD() & ~(v)))
#define HW_MCM_ISR_TOG(v) (HW_MCM_ISR_WR(HW_MCM_ISR_RD() ^ (v)))
#endif
//@}
/*
* Constants & macros for individual MCM_ISR bitfields
*/
/*!
* @name Register MCM_ISR, field IRQ[1] (W1C)
*
* If ETBCC[RSPT] is set to 01b, this bit is set when the ETB counter expires.
*
* Values:
* - 0 - No pending interrupt
* - 1 - Due to the ETB counter expiring, a normal interrupt is pending
*/
//@{
#define BP_MCM_ISR_IRQ (1U) //!< Bit position for MCM_ISR_IRQ.
#define BM_MCM_ISR_IRQ (0x00000002U) //!< Bit mask for MCM_ISR_IRQ.
#define BS_MCM_ISR_IRQ (1U) //!< Bit field size in bits for MCM_ISR_IRQ.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ISR_IRQ field.
#define BR_MCM_ISR_IRQ (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_IRQ))
#endif
//! @brief Format value for bitfield MCM_ISR_IRQ.
#define BF_MCM_ISR_IRQ(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MCM_ISR_IRQ), uint32_t) & BM_MCM_ISR_IRQ)
#ifndef __LANGUAGE_ASM__
//! @brief Set the IRQ field to a new value.
#define BW_MCM_ISR_IRQ(v) (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_IRQ) = (v))
#endif
//@}
/*!
* @name Register MCM_ISR, field NMI[2] (W1C)
*
* If ETBCC[RSPT] is set to 10b, this bit is set when the ETB counter expires.
*
* Values:
* - 0 - No pending NMI
* - 1 - Due to the ETB counter expiring, an NMI is pending
*/
//@{
#define BP_MCM_ISR_NMI (2U) //!< Bit position for MCM_ISR_NMI.
#define BM_MCM_ISR_NMI (0x00000004U) //!< Bit mask for MCM_ISR_NMI.
#define BS_MCM_ISR_NMI (1U) //!< Bit field size in bits for MCM_ISR_NMI.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ISR_NMI field.
#define BR_MCM_ISR_NMI (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_NMI))
#endif
//! @brief Format value for bitfield MCM_ISR_NMI.
#define BF_MCM_ISR_NMI(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MCM_ISR_NMI), uint32_t) & BM_MCM_ISR_NMI)
#ifndef __LANGUAGE_ASM__
//! @brief Set the NMI field to a new value.
#define BW_MCM_ISR_NMI(v) (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_NMI) = (v))
#endif
//@}
/*!
* @name Register MCM_ISR, field DHREQ[3] (RO)
*
* Indicates that a debug halt request is initiated due to a ETB counter
* expiration, ETBCC[2:0] = 3b111 & ETBCV[10:0] = 11h0. This bit is cleared when the
* counter is disabled or when the ETB counter is reloaded.
*
* Values:
* - 0 - No debug halt request
* - 1 - Debug halt request initiated
*/
//@{
#define BP_MCM_ISR_DHREQ (3U) //!< Bit position for MCM_ISR_DHREQ.
#define BM_MCM_ISR_DHREQ (0x00000008U) //!< Bit mask for MCM_ISR_DHREQ.
#define BS_MCM_ISR_DHREQ (1U) //!< Bit field size in bits for MCM_ISR_DHREQ.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ISR_DHREQ field.
#define BR_MCM_ISR_DHREQ (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_DHREQ))
#endif
//@}
/*!
* @name Register MCM_ISR, field FIOC[8] (RO)
*
* This read-only bit is a copy of the core's FPSCR[IOC] bit and signals an
* illegal operation has been detected in the processor's FPU. Once set, this bit
* remains set until software clears the FPSCR[IOC] bit.
*
* Values:
* - 0 - No interrupt
* - 1 - Interrupt occurred
*/
//@{
#define BP_MCM_ISR_FIOC (8U) //!< Bit position for MCM_ISR_FIOC.
#define BM_MCM_ISR_FIOC (0x00000100U) //!< Bit mask for MCM_ISR_FIOC.
#define BS_MCM_ISR_FIOC (1U) //!< Bit field size in bits for MCM_ISR_FIOC.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ISR_FIOC field.
#define BR_MCM_ISR_FIOC (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_FIOC))
#endif
//@}
/*!
* @name Register MCM_ISR, field FDZC[9] (RO)
*
* This read-only bit is a copy of the core's FPSCR[DZC] bit and signals a
* divide by zero has been detected in the processor's FPU. Once set, this bit remains
* set until software clears the FPSCR[DZC] bit.
*
* Values:
* - 0 - No interrupt
* - 1 - Interrupt occurred
*/
//@{
#define BP_MCM_ISR_FDZC (9U) //!< Bit position for MCM_ISR_FDZC.
#define BM_MCM_ISR_FDZC (0x00000200U) //!< Bit mask for MCM_ISR_FDZC.
#define BS_MCM_ISR_FDZC (1U) //!< Bit field size in bits for MCM_ISR_FDZC.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ISR_FDZC field.
#define BR_MCM_ISR_FDZC (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_FDZC))
#endif
//@}
/*!
* @name Register MCM_ISR, field FOFC[10] (RO)
*
* This read-only bit is a copy of the core's FPSCR[OFC] bit and signals an
* overflow has been detected in the processor's FPU. Once set, this bit remains set
* until software clears the FPSCR[OFC] bit.
*
* Values:
* - 0 - No interrupt
* - 1 - Interrupt occurred
*/
//@{
#define BP_MCM_ISR_FOFC (10U) //!< Bit position for MCM_ISR_FOFC.
#define BM_MCM_ISR_FOFC (0x00000400U) //!< Bit mask for MCM_ISR_FOFC.
#define BS_MCM_ISR_FOFC (1U) //!< Bit field size in bits for MCM_ISR_FOFC.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ISR_FOFC field.
#define BR_MCM_ISR_FOFC (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_FOFC))
#endif
//@}
/*!
* @name Register MCM_ISR, field FUFC[11] (RO)
*
* This read-only bit is a copy of the core's FPSCR[UFC] bit and signals an
* underflow has been detected in the processor's FPU. Once set, this bit remains set
* until software clears the FPSCR[UFC] bit.
*
* Values:
* - 0 - No interrupt
* - 1 - Interrupt occurred
*/
//@{
#define BP_MCM_ISR_FUFC (11U) //!< Bit position for MCM_ISR_FUFC.
#define BM_MCM_ISR_FUFC (0x00000800U) //!< Bit mask for MCM_ISR_FUFC.
#define BS_MCM_ISR_FUFC (1U) //!< Bit field size in bits for MCM_ISR_FUFC.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ISR_FUFC field.
#define BR_MCM_ISR_FUFC (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_FUFC))
#endif
//@}
/*!
* @name Register MCM_ISR, field FIXC[12] (RO)
*
* This read-only bit is a copy of the core's FPSCR[IXC] bit and signals an
* inexact number has been detected in the processor's FPU. Once set, this bit
* remains set until software clears the FPSCR[IXC] bit.
*
* Values:
* - 0 - No interrupt
* - 1 - Interrupt occurred
*/
//@{
#define BP_MCM_ISR_FIXC (12U) //!< Bit position for MCM_ISR_FIXC.
#define BM_MCM_ISR_FIXC (0x00001000U) //!< Bit mask for MCM_ISR_FIXC.
#define BS_MCM_ISR_FIXC (1U) //!< Bit field size in bits for MCM_ISR_FIXC.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ISR_FIXC field.
#define BR_MCM_ISR_FIXC (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_FIXC))
#endif
//@}
/*!
* @name Register MCM_ISR, field FIDC[15] (RO)
*
* This read-only bit is a copy of the core's FPSCR[IDC] bit and signals input
* denormalized number has been detected in the processor's FPU. Once set, this
* bit remains set until software clears the FPSCR[IDC] bit.
*
* Values:
* - 0 - No interrupt
* - 1 - Interrupt occurred
*/
//@{
#define BP_MCM_ISR_FIDC (15U) //!< Bit position for MCM_ISR_FIDC.
#define BM_MCM_ISR_FIDC (0x00008000U) //!< Bit mask for MCM_ISR_FIDC.
#define BS_MCM_ISR_FIDC (1U) //!< Bit field size in bits for MCM_ISR_FIDC.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ISR_FIDC field.
#define BR_MCM_ISR_FIDC (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_FIDC))
#endif
//@}
/*!
* @name Register MCM_ISR, field FIOCE[24] (RW)
*
* Values:
* - 0 - Disable interrupt
* - 1 - Enable interrupt
*/
//@{
#define BP_MCM_ISR_FIOCE (24U) //!< Bit position for MCM_ISR_FIOCE.
#define BM_MCM_ISR_FIOCE (0x01000000U) //!< Bit mask for MCM_ISR_FIOCE.
#define BS_MCM_ISR_FIOCE (1U) //!< Bit field size in bits for MCM_ISR_FIOCE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ISR_FIOCE field.
#define BR_MCM_ISR_FIOCE (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_FIOCE))
#endif
//! @brief Format value for bitfield MCM_ISR_FIOCE.
#define BF_MCM_ISR_FIOCE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MCM_ISR_FIOCE), uint32_t) & BM_MCM_ISR_FIOCE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the FIOCE field to a new value.
#define BW_MCM_ISR_FIOCE(v) (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_FIOCE) = (v))
#endif
//@}
/*!
* @name Register MCM_ISR, field FDZCE[25] (RW)
*
* Values:
* - 0 - Disable interrupt
* - 1 - Enable interrupt
*/
//@{
#define BP_MCM_ISR_FDZCE (25U) //!< Bit position for MCM_ISR_FDZCE.
#define BM_MCM_ISR_FDZCE (0x02000000U) //!< Bit mask for MCM_ISR_FDZCE.
#define BS_MCM_ISR_FDZCE (1U) //!< Bit field size in bits for MCM_ISR_FDZCE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ISR_FDZCE field.
#define BR_MCM_ISR_FDZCE (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_FDZCE))
#endif
//! @brief Format value for bitfield MCM_ISR_FDZCE.
#define BF_MCM_ISR_FDZCE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MCM_ISR_FDZCE), uint32_t) & BM_MCM_ISR_FDZCE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the FDZCE field to a new value.
#define BW_MCM_ISR_FDZCE(v) (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_FDZCE) = (v))
#endif
//@}
/*!
* @name Register MCM_ISR, field FOFCE[26] (RW)
*
* Values:
* - 0 - Disable interrupt
* - 1 - Enable interrupt
*/
//@{
#define BP_MCM_ISR_FOFCE (26U) //!< Bit position for MCM_ISR_FOFCE.
#define BM_MCM_ISR_FOFCE (0x04000000U) //!< Bit mask for MCM_ISR_FOFCE.
#define BS_MCM_ISR_FOFCE (1U) //!< Bit field size in bits for MCM_ISR_FOFCE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ISR_FOFCE field.
#define BR_MCM_ISR_FOFCE (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_FOFCE))
#endif
//! @brief Format value for bitfield MCM_ISR_FOFCE.
#define BF_MCM_ISR_FOFCE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MCM_ISR_FOFCE), uint32_t) & BM_MCM_ISR_FOFCE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the FOFCE field to a new value.
#define BW_MCM_ISR_FOFCE(v) (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_FOFCE) = (v))
#endif
//@}
/*!
* @name Register MCM_ISR, field FUFCE[27] (RW)
*
* Values:
* - 0 - Disable interrupt
* - 1 - Enable interrupt
*/
//@{
#define BP_MCM_ISR_FUFCE (27U) //!< Bit position for MCM_ISR_FUFCE.
#define BM_MCM_ISR_FUFCE (0x08000000U) //!< Bit mask for MCM_ISR_FUFCE.
#define BS_MCM_ISR_FUFCE (1U) //!< Bit field size in bits for MCM_ISR_FUFCE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ISR_FUFCE field.
#define BR_MCM_ISR_FUFCE (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_FUFCE))
#endif
//! @brief Format value for bitfield MCM_ISR_FUFCE.
#define BF_MCM_ISR_FUFCE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MCM_ISR_FUFCE), uint32_t) & BM_MCM_ISR_FUFCE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the FUFCE field to a new value.
#define BW_MCM_ISR_FUFCE(v) (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_FUFCE) = (v))
#endif
//@}
/*!
* @name Register MCM_ISR, field FIXCE[28] (RW)
*
* Values:
* - 0 - Disable interrupt
* - 1 - Enable interrupt
*/
//@{
#define BP_MCM_ISR_FIXCE (28U) //!< Bit position for MCM_ISR_FIXCE.
#define BM_MCM_ISR_FIXCE (0x10000000U) //!< Bit mask for MCM_ISR_FIXCE.
#define BS_MCM_ISR_FIXCE (1U) //!< Bit field size in bits for MCM_ISR_FIXCE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ISR_FIXCE field.
#define BR_MCM_ISR_FIXCE (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_FIXCE))
#endif
//! @brief Format value for bitfield MCM_ISR_FIXCE.
#define BF_MCM_ISR_FIXCE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MCM_ISR_FIXCE), uint32_t) & BM_MCM_ISR_FIXCE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the FIXCE field to a new value.
#define BW_MCM_ISR_FIXCE(v) (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_FIXCE) = (v))
#endif
//@}
/*!
* @name Register MCM_ISR, field FIDCE[31] (RW)
*
* Values:
* - 0 - Disable interrupt
* - 1 - Enable interrupt
*/
//@{
#define BP_MCM_ISR_FIDCE (31U) //!< Bit position for MCM_ISR_FIDCE.
#define BM_MCM_ISR_FIDCE (0x80000000U) //!< Bit mask for MCM_ISR_FIDCE.
#define BS_MCM_ISR_FIDCE (1U) //!< Bit field size in bits for MCM_ISR_FIDCE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ISR_FIDCE field.
#define BR_MCM_ISR_FIDCE (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_FIDCE))
#endif
//! @brief Format value for bitfield MCM_ISR_FIDCE.
#define BF_MCM_ISR_FIDCE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MCM_ISR_FIDCE), uint32_t) & BM_MCM_ISR_FIDCE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the FIDCE field to a new value.
#define BW_MCM_ISR_FIDCE(v) (BITBAND_ACCESS32(HW_MCM_ISR_ADDR, BP_MCM_ISR_FIDCE) = (v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_MCM_ETBCC - ETB Counter Control register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_MCM_ETBCC - ETB Counter Control register (RW)
*
* Reset value: 0x00000000U
*/
typedef union _hw_mcm_etbcc
{
uint32_t U;
struct _hw_mcm_etbcc_bitfields
{
uint32_t CNTEN : 1; //!< [0] Counter Enable
uint32_t RSPT : 2; //!< [2:1] Response Type
uint32_t RLRQ : 1; //!< [3] Reload Request
uint32_t ETDIS : 1; //!< [4] ETM-To-TPIU Disable
uint32_t ITDIS : 1; //!< [5] ITM-To-TPIU Disable
uint32_t RESERVED0 : 26; //!< [31:6]
} B;
} hw_mcm_etbcc_t;
#endif
/*!
* @name Constants and macros for entire MCM_ETBCC register
*/
//@{
#define HW_MCM_ETBCC_ADDR (REGS_MCM_BASE + 0x14U)
#ifndef __LANGUAGE_ASM__
#define HW_MCM_ETBCC (*(__IO hw_mcm_etbcc_t *) HW_MCM_ETBCC_ADDR)
#define HW_MCM_ETBCC_RD() (HW_MCM_ETBCC.U)
#define HW_MCM_ETBCC_WR(v) (HW_MCM_ETBCC.U = (v))
#define HW_MCM_ETBCC_SET(v) (HW_MCM_ETBCC_WR(HW_MCM_ETBCC_RD() | (v)))
#define HW_MCM_ETBCC_CLR(v) (HW_MCM_ETBCC_WR(HW_MCM_ETBCC_RD() & ~(v)))
#define HW_MCM_ETBCC_TOG(v) (HW_MCM_ETBCC_WR(HW_MCM_ETBCC_RD() ^ (v)))
#endif
//@}
/*
* Constants & macros for individual MCM_ETBCC bitfields
*/
/*!
* @name Register MCM_ETBCC, field CNTEN[0] (RW)
*
* Enables the ETB counter.
*
* Values:
* - 0 - ETB counter disabled
* - 1 - ETB counter enabled
*/
//@{
#define BP_MCM_ETBCC_CNTEN (0U) //!< Bit position for MCM_ETBCC_CNTEN.
#define BM_MCM_ETBCC_CNTEN (0x00000001U) //!< Bit mask for MCM_ETBCC_CNTEN.
#define BS_MCM_ETBCC_CNTEN (1U) //!< Bit field size in bits for MCM_ETBCC_CNTEN.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ETBCC_CNTEN field.
#define BR_MCM_ETBCC_CNTEN (BITBAND_ACCESS32(HW_MCM_ETBCC_ADDR, BP_MCM_ETBCC_CNTEN))
#endif
//! @brief Format value for bitfield MCM_ETBCC_CNTEN.
#define BF_MCM_ETBCC_CNTEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MCM_ETBCC_CNTEN), uint32_t) & BM_MCM_ETBCC_CNTEN)
#ifndef __LANGUAGE_ASM__
//! @brief Set the CNTEN field to a new value.
#define BW_MCM_ETBCC_CNTEN(v) (BITBAND_ACCESS32(HW_MCM_ETBCC_ADDR, BP_MCM_ETBCC_CNTEN) = (v))
#endif
//@}
/*!
* @name Register MCM_ETBCC, field RSPT[2:1] (RW)
*
* Values:
* - 00 - No response when the ETB count expires
* - 01 - Generate a normal interrupt when the ETB count expires
* - 10 - Generate an NMI when the ETB count expires
* - 11 - Generate a debug halt when the ETB count expires
*/
//@{
#define BP_MCM_ETBCC_RSPT (1U) //!< Bit position for MCM_ETBCC_RSPT.
#define BM_MCM_ETBCC_RSPT (0x00000006U) //!< Bit mask for MCM_ETBCC_RSPT.
#define BS_MCM_ETBCC_RSPT (2U) //!< Bit field size in bits for MCM_ETBCC_RSPT.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ETBCC_RSPT field.
#define BR_MCM_ETBCC_RSPT (HW_MCM_ETBCC.B.RSPT)
#endif
//! @brief Format value for bitfield MCM_ETBCC_RSPT.
#define BF_MCM_ETBCC_RSPT(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MCM_ETBCC_RSPT), uint32_t) & BM_MCM_ETBCC_RSPT)
#ifndef __LANGUAGE_ASM__
//! @brief Set the RSPT field to a new value.
#define BW_MCM_ETBCC_RSPT(v) (HW_MCM_ETBCC_WR((HW_MCM_ETBCC_RD() & ~BM_MCM_ETBCC_RSPT) | BF_MCM_ETBCC_RSPT(v)))
#endif
//@}
/*!
* @name Register MCM_ETBCC, field RLRQ[3] (RW)
*
* Reloads the ETB packet counter with the MCM_ETBRL RELOAD value. If IRQ or NMI
* interrupts were enabled and an NMI or IRQ interrupt was generated on counter
* expiration, setting this bit clears the pending NMI or IRQ interrupt request.
* If debug halt was enabled and a debug halt request was asserted on counter
* expiration, setting this bit clears the debug halt request.
*
* Values:
* - 0 - No effect
* - 1 - Clears pending debug halt, NMI, or IRQ interrupt requests
*/
//@{
#define BP_MCM_ETBCC_RLRQ (3U) //!< Bit position for MCM_ETBCC_RLRQ.
#define BM_MCM_ETBCC_RLRQ (0x00000008U) //!< Bit mask for MCM_ETBCC_RLRQ.
#define BS_MCM_ETBCC_RLRQ (1U) //!< Bit field size in bits for MCM_ETBCC_RLRQ.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ETBCC_RLRQ field.
#define BR_MCM_ETBCC_RLRQ (BITBAND_ACCESS32(HW_MCM_ETBCC_ADDR, BP_MCM_ETBCC_RLRQ))
#endif
//! @brief Format value for bitfield MCM_ETBCC_RLRQ.
#define BF_MCM_ETBCC_RLRQ(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MCM_ETBCC_RLRQ), uint32_t) & BM_MCM_ETBCC_RLRQ)
#ifndef __LANGUAGE_ASM__
//! @brief Set the RLRQ field to a new value.
#define BW_MCM_ETBCC_RLRQ(v) (BITBAND_ACCESS32(HW_MCM_ETBCC_ADDR, BP_MCM_ETBCC_RLRQ) = (v))
#endif
//@}
/*!
* @name Register MCM_ETBCC, field ETDIS[4] (RW)
*
* Disables the trace path from ETM to TPIU.
*
* Values:
* - 0 - ETM-to-TPIU trace path enabled
* - 1 - ETM-to-TPIU trace path disabled
*/
//@{
#define BP_MCM_ETBCC_ETDIS (4U) //!< Bit position for MCM_ETBCC_ETDIS.
#define BM_MCM_ETBCC_ETDIS (0x00000010U) //!< Bit mask for MCM_ETBCC_ETDIS.
#define BS_MCM_ETBCC_ETDIS (1U) //!< Bit field size in bits for MCM_ETBCC_ETDIS.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ETBCC_ETDIS field.
#define BR_MCM_ETBCC_ETDIS (BITBAND_ACCESS32(HW_MCM_ETBCC_ADDR, BP_MCM_ETBCC_ETDIS))
#endif
//! @brief Format value for bitfield MCM_ETBCC_ETDIS.
#define BF_MCM_ETBCC_ETDIS(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MCM_ETBCC_ETDIS), uint32_t) & BM_MCM_ETBCC_ETDIS)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ETDIS field to a new value.
#define BW_MCM_ETBCC_ETDIS(v) (BITBAND_ACCESS32(HW_MCM_ETBCC_ADDR, BP_MCM_ETBCC_ETDIS) = (v))
#endif
//@}
/*!
* @name Register MCM_ETBCC, field ITDIS[5] (RW)
*
* Disables the trace path from ITM to TPIU.
*
* Values:
* - 0 - ITM-to-TPIU trace path enabled
* - 1 - ITM-to-TPIU trace path disabled
*/
//@{
#define BP_MCM_ETBCC_ITDIS (5U) //!< Bit position for MCM_ETBCC_ITDIS.
#define BM_MCM_ETBCC_ITDIS (0x00000020U) //!< Bit mask for MCM_ETBCC_ITDIS.
#define BS_MCM_ETBCC_ITDIS (1U) //!< Bit field size in bits for MCM_ETBCC_ITDIS.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ETBCC_ITDIS field.
#define BR_MCM_ETBCC_ITDIS (BITBAND_ACCESS32(HW_MCM_ETBCC_ADDR, BP_MCM_ETBCC_ITDIS))
#endif
//! @brief Format value for bitfield MCM_ETBCC_ITDIS.
#define BF_MCM_ETBCC_ITDIS(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MCM_ETBCC_ITDIS), uint32_t) & BM_MCM_ETBCC_ITDIS)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ITDIS field to a new value.
#define BW_MCM_ETBCC_ITDIS(v) (BITBAND_ACCESS32(HW_MCM_ETBCC_ADDR, BP_MCM_ETBCC_ITDIS) = (v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_MCM_ETBRL - ETB Reload register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_MCM_ETBRL - ETB Reload register (RW)
*
* Reset value: 0x00000000U
*/
typedef union _hw_mcm_etbrl
{
uint32_t U;
struct _hw_mcm_etbrl_bitfields
{
uint32_t RELOAD : 11; //!< [10:0] Byte Count Reload Value
uint32_t RESERVED0 : 21; //!< [31:11]
} B;
} hw_mcm_etbrl_t;
#endif
/*!
* @name Constants and macros for entire MCM_ETBRL register
*/
//@{
#define HW_MCM_ETBRL_ADDR (REGS_MCM_BASE + 0x18U)
#ifndef __LANGUAGE_ASM__
#define HW_MCM_ETBRL (*(__IO hw_mcm_etbrl_t *) HW_MCM_ETBRL_ADDR)
#define HW_MCM_ETBRL_RD() (HW_MCM_ETBRL.U)
#define HW_MCM_ETBRL_WR(v) (HW_MCM_ETBRL.U = (v))
#define HW_MCM_ETBRL_SET(v) (HW_MCM_ETBRL_WR(HW_MCM_ETBRL_RD() | (v)))
#define HW_MCM_ETBRL_CLR(v) (HW_MCM_ETBRL_WR(HW_MCM_ETBRL_RD() & ~(v)))
#define HW_MCM_ETBRL_TOG(v) (HW_MCM_ETBRL_WR(HW_MCM_ETBRL_RD() ^ (v)))
#endif
//@}
/*
* Constants & macros for individual MCM_ETBRL bitfields
*/
/*!
* @name Register MCM_ETBRL, field RELOAD[10:0] (RW)
*
* Indicates the 0-mod-4 value the counter reloads to. Writing a non-0-mod-4
* value to this field results in a bus error.
*/
//@{
#define BP_MCM_ETBRL_RELOAD (0U) //!< Bit position for MCM_ETBRL_RELOAD.
#define BM_MCM_ETBRL_RELOAD (0x000007FFU) //!< Bit mask for MCM_ETBRL_RELOAD.
#define BS_MCM_ETBRL_RELOAD (11U) //!< Bit field size in bits for MCM_ETBRL_RELOAD.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ETBRL_RELOAD field.
#define BR_MCM_ETBRL_RELOAD (HW_MCM_ETBRL.B.RELOAD)
#endif
//! @brief Format value for bitfield MCM_ETBRL_RELOAD.
#define BF_MCM_ETBRL_RELOAD(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MCM_ETBRL_RELOAD), uint32_t) & BM_MCM_ETBRL_RELOAD)
#ifndef __LANGUAGE_ASM__
//! @brief Set the RELOAD field to a new value.
#define BW_MCM_ETBRL_RELOAD(v) (HW_MCM_ETBRL_WR((HW_MCM_ETBRL_RD() & ~BM_MCM_ETBRL_RELOAD) | BF_MCM_ETBRL_RELOAD(v)))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_MCM_ETBCNT - ETB Counter Value register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_MCM_ETBCNT - ETB Counter Value register (RO)
*
* Reset value: 0x00000000U
*/
typedef union _hw_mcm_etbcnt
{
uint32_t U;
struct _hw_mcm_etbcnt_bitfields
{
uint32_t COUNTER : 11; //!< [10:0] Byte Count Counter Value
uint32_t RESERVED0 : 21; //!< [31:11]
} B;
} hw_mcm_etbcnt_t;
#endif
/*!
* @name Constants and macros for entire MCM_ETBCNT register
*/
//@{
#define HW_MCM_ETBCNT_ADDR (REGS_MCM_BASE + 0x1CU)
#ifndef __LANGUAGE_ASM__
#define HW_MCM_ETBCNT (*(__I hw_mcm_etbcnt_t *) HW_MCM_ETBCNT_ADDR)
#define HW_MCM_ETBCNT_RD() (HW_MCM_ETBCNT.U)
#endif
//@}
/*
* Constants & macros for individual MCM_ETBCNT bitfields
*/
/*!
* @name Register MCM_ETBCNT, field COUNTER[10:0] (RO)
*
* Indicates the current 0-mod-4 value of the counter.
*/
//@{
#define BP_MCM_ETBCNT_COUNTER (0U) //!< Bit position for MCM_ETBCNT_COUNTER.
#define BM_MCM_ETBCNT_COUNTER (0x000007FFU) //!< Bit mask for MCM_ETBCNT_COUNTER.
#define BS_MCM_ETBCNT_COUNTER (11U) //!< Bit field size in bits for MCM_ETBCNT_COUNTER.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_ETBCNT_COUNTER field.
#define BR_MCM_ETBCNT_COUNTER (HW_MCM_ETBCNT.B.COUNTER)
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_MCM_PID - Process ID register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_MCM_PID - Process ID register (RW)
*
* Reset value: 0x00000000U
*
* This register drives the M0_PID and M1_PID values in the Memory Protection
* Unit(MPU). System software loads this register before passing control to a given
* user mode process. If the PID of the process does not match the value in this
* register, a bus error occurs. See the MPU chapter for more details.
*/
typedef union _hw_mcm_pid
{
uint32_t U;
struct _hw_mcm_pid_bitfields
{
uint32_t PID : 8; //!< [7:0] M0_PID And M1_PID For MPU
uint32_t RESERVED0 : 24; //!< [31:8]
} B;
} hw_mcm_pid_t;
#endif
/*!
* @name Constants and macros for entire MCM_PID register
*/
//@{
#define HW_MCM_PID_ADDR (REGS_MCM_BASE + 0x30U)
#ifndef __LANGUAGE_ASM__
#define HW_MCM_PID (*(__IO hw_mcm_pid_t *) HW_MCM_PID_ADDR)
#define HW_MCM_PID_RD() (HW_MCM_PID.U)
#define HW_MCM_PID_WR(v) (HW_MCM_PID.U = (v))
#define HW_MCM_PID_SET(v) (HW_MCM_PID_WR(HW_MCM_PID_RD() | (v)))
#define HW_MCM_PID_CLR(v) (HW_MCM_PID_WR(HW_MCM_PID_RD() & ~(v)))
#define HW_MCM_PID_TOG(v) (HW_MCM_PID_WR(HW_MCM_PID_RD() ^ (v)))
#endif
//@}
/*
* Constants & macros for individual MCM_PID bitfields
*/
/*!
* @name Register MCM_PID, field PID[7:0] (RW)
*
* Drives the M0_PID and M1_PID values in the MPU.
*/
//@{
#define BP_MCM_PID_PID (0U) //!< Bit position for MCM_PID_PID.
#define BM_MCM_PID_PID (0x000000FFU) //!< Bit mask for MCM_PID_PID.
#define BS_MCM_PID_PID (8U) //!< Bit field size in bits for MCM_PID_PID.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the MCM_PID_PID field.
#define BR_MCM_PID_PID (HW_MCM_PID.B.PID)
#endif
//! @brief Format value for bitfield MCM_PID_PID.
#define BF_MCM_PID_PID(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_MCM_PID_PID), uint32_t) & BM_MCM_PID_PID)
#ifndef __LANGUAGE_ASM__
//! @brief Set the PID field to a new value.
#define BW_MCM_PID_PID(v) (HW_MCM_PID_WR((HW_MCM_PID_RD() & ~BM_MCM_PID_PID) | BF_MCM_PID_PID(v)))
#endif
//@}
//-------------------------------------------------------------------------------------------
// hw_mcm_t - module struct
//-------------------------------------------------------------------------------------------
/*!
* @brief All MCM module registers.
*/
#ifndef __LANGUAGE_ASM__
#pragma pack(1)
typedef struct _hw_mcm
{
uint8_t _reserved0[8];
__I hw_mcm_plasc_t PLASC; //!< [0x8] Crossbar Switch (AXBS) Slave Configuration
__I hw_mcm_plamc_t PLAMC; //!< [0xA] Crossbar Switch (AXBS) Master Configuration
__IO hw_mcm_cr_t CR; //!< [0xC] Control Register
__IO hw_mcm_isr_t ISR; //!< [0x10] Interrupt Status Register
__IO hw_mcm_etbcc_t ETBCC; //!< [0x14] ETB Counter Control register
__IO hw_mcm_etbrl_t ETBRL; //!< [0x18] ETB Reload register
__I hw_mcm_etbcnt_t ETBCNT; //!< [0x1C] ETB Counter Value register
uint8_t _reserved1[16];
__IO hw_mcm_pid_t PID; //!< [0x30] Process ID register
} hw_mcm_t;
#pragma pack()
//! @brief Macro to access all MCM registers.
//! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct,
//! use the '&' operator, like <code>&HW_MCM</code>.
#define HW_MCM (*(hw_mcm_t *) REGS_MCM_BASE)
#endif
#endif // __HW_MCM_REGISTERS_H__
// v22/130726/0.9
// EOF
View Git Blame Copy Permalink