libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity
rt-thread-official/bsp/frdm-k64f/device/MK64F12/MK64F12_llwu.h

2253 lines
84 KiB
C
Raw Blame History

/*
* Copyright (c) 2014, Freescale Semiconductor, Inc.
* All rights reserved.
*
* THIS SOFTWARE IS PROVIDED BY FREESCALE "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
* SHALL FREESCALE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
* OF SUCH DAMAGE.
*/
/*
* WARNING! DO NOT EDIT THIS FILE DIRECTLY!
*
* This file was generated automatically and any changes may be lost.
*/
#ifndef __HW_LLWU_REGISTERS_H__
#define __HW_LLWU_REGISTERS_H__
#include "regs.h"
/*
* MK64F12 LLWU
*
* Low leakage wakeup unit
*
* Registers defined in this header file:
* - HW_LLWU_PE1 - LLWU Pin Enable 1 register
* - HW_LLWU_PE2 - LLWU Pin Enable 2 register
* - HW_LLWU_PE3 - LLWU Pin Enable 3 register
* - HW_LLWU_PE4 - LLWU Pin Enable 4 register
* - HW_LLWU_ME - LLWU Module Enable register
* - HW_LLWU_F1 - LLWU Flag 1 register
* - HW_LLWU_F2 - LLWU Flag 2 register
* - HW_LLWU_F3 - LLWU Flag 3 register
* - HW_LLWU_FILT1 - LLWU Pin Filter 1 register
* - HW_LLWU_FILT2 - LLWU Pin Filter 2 register
* - HW_LLWU_RST - LLWU Reset Enable register
*
* - hw_llwu_t - Struct containing all module registers.
*/
//! @name Module base addresses
//@{
#ifndef REGS_LLWU_BASE
#define HW_LLWU_INSTANCE_COUNT (1U) //!< Number of instances of the LLWU module.
#define REGS_LLWU_BASE (0x4007C000U) //!< Base address for LLWU.
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_LLWU_PE1 - LLWU Pin Enable 1 register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_LLWU_PE1 - LLWU Pin Enable 1 register (RW)
*
* Reset value: 0x00U
*
* LLWU_PE1 contains the field to enable and select the edge detect type for the
* external wakeup input pins LLWU_P3-LLWU_P0. This register is reset on Chip
* Reset not VLLS and by reset types that trigger Chip Reset not VLLS. It is
* unaffected by reset types that do not trigger Chip Reset not VLLS. See the
* IntroductionInformation found here describes the registers of the Reset Control Module
* (RCM). The RCM implements many of the reset functions for the chip. See the
* chip's reset chapter for more information. details for more information.
*/
typedef union _hw_llwu_pe1
{
uint8_t U;
struct _hw_llwu_pe1_bitfields
{
uint8_t WUPE0 : 2; //!< [1:0] Wakeup Pin Enable For LLWU_P0
uint8_t WUPE1 : 2; //!< [3:2] Wakeup Pin Enable For LLWU_P1
uint8_t WUPE2 : 2; //!< [5:4] Wakeup Pin Enable For LLWU_P2
uint8_t WUPE3 : 2; //!< [7:6] Wakeup Pin Enable For LLWU_P3
} B;
} hw_llwu_pe1_t;
#endif
/*!
* @name Constants and macros for entire LLWU_PE1 register
*/
//@{
#define HW_LLWU_PE1_ADDR (REGS_LLWU_BASE + 0x0U)
#ifndef __LANGUAGE_ASM__
#define HW_LLWU_PE1 (*(__IO hw_llwu_pe1_t *) HW_LLWU_PE1_ADDR)
#define HW_LLWU_PE1_RD() (HW_LLWU_PE1.U)
#define HW_LLWU_PE1_WR(v) (HW_LLWU_PE1.U = (v))
#define HW_LLWU_PE1_SET(v) (HW_LLWU_PE1_WR(HW_LLWU_PE1_RD() | (v)))
#define HW_LLWU_PE1_CLR(v) (HW_LLWU_PE1_WR(HW_LLWU_PE1_RD() & ~(v)))
#define HW_LLWU_PE1_TOG(v) (HW_LLWU_PE1_WR(HW_LLWU_PE1_RD() ^ (v)))
#endif
//@}
/*
* Constants & macros for individual LLWU_PE1 bitfields
*/
/*!
* @name Register LLWU_PE1, field WUPE0[1:0] (RW)
*
* Enables and configures the edge detection for the wakeup pin.
*
* Values:
* - 00 - External input pin disabled as wakeup input
* - 01 - External input pin enabled with rising edge detection
* - 10 - External input pin enabled with falling edge detection
* - 11 - External input pin enabled with any change detection
*/
//@{
#define BP_LLWU_PE1_WUPE0 (0U) //!< Bit position for LLWU_PE1_WUPE0.
#define BM_LLWU_PE1_WUPE0 (0x03U) //!< Bit mask for LLWU_PE1_WUPE0.
#define BS_LLWU_PE1_WUPE0 (2U) //!< Bit field size in bits for LLWU_PE1_WUPE0.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_PE1_WUPE0 field.
#define BR_LLWU_PE1_WUPE0 (HW_LLWU_PE1.B.WUPE0)
#endif
//! @brief Format value for bitfield LLWU_PE1_WUPE0.
#define BF_LLWU_PE1_WUPE0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_PE1_WUPE0), uint8_t) & BM_LLWU_PE1_WUPE0)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUPE0 field to a new value.
#define BW_LLWU_PE1_WUPE0(v) (HW_LLWU_PE1_WR((HW_LLWU_PE1_RD() & ~BM_LLWU_PE1_WUPE0) | BF_LLWU_PE1_WUPE0(v)))
#endif
//@}
/*!
* @name Register LLWU_PE1, field WUPE1[3:2] (RW)
*
* Enables and configures the edge detection for the wakeup pin.
*
* Values:
* - 00 - External input pin disabled as wakeup input
* - 01 - External input pin enabled with rising edge detection
* - 10 - External input pin enabled with falling edge detection
* - 11 - External input pin enabled with any change detection
*/
//@{
#define BP_LLWU_PE1_WUPE1 (2U) //!< Bit position for LLWU_PE1_WUPE1.
#define BM_LLWU_PE1_WUPE1 (0x0CU) //!< Bit mask for LLWU_PE1_WUPE1.
#define BS_LLWU_PE1_WUPE1 (2U) //!< Bit field size in bits for LLWU_PE1_WUPE1.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_PE1_WUPE1 field.
#define BR_LLWU_PE1_WUPE1 (HW_LLWU_PE1.B.WUPE1)
#endif
//! @brief Format value for bitfield LLWU_PE1_WUPE1.
#define BF_LLWU_PE1_WUPE1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_PE1_WUPE1), uint8_t) & BM_LLWU_PE1_WUPE1)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUPE1 field to a new value.
#define BW_LLWU_PE1_WUPE1(v) (HW_LLWU_PE1_WR((HW_LLWU_PE1_RD() & ~BM_LLWU_PE1_WUPE1) | BF_LLWU_PE1_WUPE1(v)))
#endif
//@}
/*!
* @name Register LLWU_PE1, field WUPE2[5:4] (RW)
*
* Enables and configures the edge detection for the wakeup pin.
*
* Values:
* - 00 - External input pin disabled as wakeup input
* - 01 - External input pin enabled with rising edge detection
* - 10 - External input pin enabled with falling edge detection
* - 11 - External input pin enabled with any change detection
*/
//@{
#define BP_LLWU_PE1_WUPE2 (4U) //!< Bit position for LLWU_PE1_WUPE2.
#define BM_LLWU_PE1_WUPE2 (0x30U) //!< Bit mask for LLWU_PE1_WUPE2.
#define BS_LLWU_PE1_WUPE2 (2U) //!< Bit field size in bits for LLWU_PE1_WUPE2.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_PE1_WUPE2 field.
#define BR_LLWU_PE1_WUPE2 (HW_LLWU_PE1.B.WUPE2)
#endif
//! @brief Format value for bitfield LLWU_PE1_WUPE2.
#define BF_LLWU_PE1_WUPE2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_PE1_WUPE2), uint8_t) & BM_LLWU_PE1_WUPE2)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUPE2 field to a new value.
#define BW_LLWU_PE1_WUPE2(v) (HW_LLWU_PE1_WR((HW_LLWU_PE1_RD() & ~BM_LLWU_PE1_WUPE2) | BF_LLWU_PE1_WUPE2(v)))
#endif
//@}
/*!
* @name Register LLWU_PE1, field WUPE3[7:6] (RW)
*
* Enables and configures the edge detection for the wakeup pin.
*
* Values:
* - 00 - External input pin disabled as wakeup input
* - 01 - External input pin enabled with rising edge detection
* - 10 - External input pin enabled with falling edge detection
* - 11 - External input pin enabled with any change detection
*/
//@{
#define BP_LLWU_PE1_WUPE3 (6U) //!< Bit position for LLWU_PE1_WUPE3.
#define BM_LLWU_PE1_WUPE3 (0xC0U) //!< Bit mask for LLWU_PE1_WUPE3.
#define BS_LLWU_PE1_WUPE3 (2U) //!< Bit field size in bits for LLWU_PE1_WUPE3.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_PE1_WUPE3 field.
#define BR_LLWU_PE1_WUPE3 (HW_LLWU_PE1.B.WUPE3)
#endif
//! @brief Format value for bitfield LLWU_PE1_WUPE3.
#define BF_LLWU_PE1_WUPE3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_PE1_WUPE3), uint8_t) & BM_LLWU_PE1_WUPE3)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUPE3 field to a new value.
#define BW_LLWU_PE1_WUPE3(v) (HW_LLWU_PE1_WR((HW_LLWU_PE1_RD() & ~BM_LLWU_PE1_WUPE3) | BF_LLWU_PE1_WUPE3(v)))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_LLWU_PE2 - LLWU Pin Enable 2 register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_LLWU_PE2 - LLWU Pin Enable 2 register (RW)
*
* Reset value: 0x00U
*
* LLWU_PE2 contains the field to enable and select the edge detect type for the
* external wakeup input pins LLWU_P7-LLWU_P4. This register is reset on Chip
* Reset not VLLS and by reset types that trigger Chip Reset not VLLS. It is
* unaffected by reset types that do not trigger Chip Reset not VLLS. See the
* IntroductionInformation found here describes the registers of the Reset Control Module
* (RCM). The RCM implements many of the reset functions for the chip. See the
* chip's reset chapter for more information. details for more information.
*/
typedef union _hw_llwu_pe2
{
uint8_t U;
struct _hw_llwu_pe2_bitfields
{
uint8_t WUPE4 : 2; //!< [1:0] Wakeup Pin Enable For LLWU_P4
uint8_t WUPE5 : 2; //!< [3:2] Wakeup Pin Enable For LLWU_P5
uint8_t WUPE6 : 2; //!< [5:4] Wakeup Pin Enable For LLWU_P6
uint8_t WUPE7 : 2; //!< [7:6] Wakeup Pin Enable For LLWU_P7
} B;
} hw_llwu_pe2_t;
#endif
/*!
* @name Constants and macros for entire LLWU_PE2 register
*/
//@{
#define HW_LLWU_PE2_ADDR (REGS_LLWU_BASE + 0x1U)
#ifndef __LANGUAGE_ASM__
#define HW_LLWU_PE2 (*(__IO hw_llwu_pe2_t *) HW_LLWU_PE2_ADDR)
#define HW_LLWU_PE2_RD() (HW_LLWU_PE2.U)
#define HW_LLWU_PE2_WR(v) (HW_LLWU_PE2.U = (v))
#define HW_LLWU_PE2_SET(v) (HW_LLWU_PE2_WR(HW_LLWU_PE2_RD() | (v)))
#define HW_LLWU_PE2_CLR(v) (HW_LLWU_PE2_WR(HW_LLWU_PE2_RD() & ~(v)))
#define HW_LLWU_PE2_TOG(v) (HW_LLWU_PE2_WR(HW_LLWU_PE2_RD() ^ (v)))
#endif
//@}
/*
* Constants & macros for individual LLWU_PE2 bitfields
*/
/*!
* @name Register LLWU_PE2, field WUPE4[1:0] (RW)
*
* Enables and configures the edge detection for the wakeup pin.
*
* Values:
* - 00 - External input pin disabled as wakeup input
* - 01 - External input pin enabled with rising edge detection
* - 10 - External input pin enabled with falling edge detection
* - 11 - External input pin enabled with any change detection
*/
//@{
#define BP_LLWU_PE2_WUPE4 (0U) //!< Bit position for LLWU_PE2_WUPE4.
#define BM_LLWU_PE2_WUPE4 (0x03U) //!< Bit mask for LLWU_PE2_WUPE4.
#define BS_LLWU_PE2_WUPE4 (2U) //!< Bit field size in bits for LLWU_PE2_WUPE4.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_PE2_WUPE4 field.
#define BR_LLWU_PE2_WUPE4 (HW_LLWU_PE2.B.WUPE4)
#endif
//! @brief Format value for bitfield LLWU_PE2_WUPE4.
#define BF_LLWU_PE2_WUPE4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_PE2_WUPE4), uint8_t) & BM_LLWU_PE2_WUPE4)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUPE4 field to a new value.
#define BW_LLWU_PE2_WUPE4(v) (HW_LLWU_PE2_WR((HW_LLWU_PE2_RD() & ~BM_LLWU_PE2_WUPE4) | BF_LLWU_PE2_WUPE4(v)))
#endif
//@}
/*!
* @name Register LLWU_PE2, field WUPE5[3:2] (RW)
*
* Enables and configures the edge detection for the wakeup pin.
*
* Values:
* - 00 - External input pin disabled as wakeup input
* - 01 - External input pin enabled with rising edge detection
* - 10 - External input pin enabled with falling edge detection
* - 11 - External input pin enabled with any change detection
*/
//@{
#define BP_LLWU_PE2_WUPE5 (2U) //!< Bit position for LLWU_PE2_WUPE5.
#define BM_LLWU_PE2_WUPE5 (0x0CU) //!< Bit mask for LLWU_PE2_WUPE5.
#define BS_LLWU_PE2_WUPE5 (2U) //!< Bit field size in bits for LLWU_PE2_WUPE5.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_PE2_WUPE5 field.
#define BR_LLWU_PE2_WUPE5 (HW_LLWU_PE2.B.WUPE5)
#endif
//! @brief Format value for bitfield LLWU_PE2_WUPE5.
#define BF_LLWU_PE2_WUPE5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_PE2_WUPE5), uint8_t) & BM_LLWU_PE2_WUPE5)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUPE5 field to a new value.
#define BW_LLWU_PE2_WUPE5(v) (HW_LLWU_PE2_WR((HW_LLWU_PE2_RD() & ~BM_LLWU_PE2_WUPE5) | BF_LLWU_PE2_WUPE5(v)))
#endif
//@}
/*!
* @name Register LLWU_PE2, field WUPE6[5:4] (RW)
*
* Enables and configures the edge detection for the wakeup pin.
*
* Values:
* - 00 - External input pin disabled as wakeup input
* - 01 - External input pin enabled with rising edge detection
* - 10 - External input pin enabled with falling edge detection
* - 11 - External input pin enabled with any change detection
*/
//@{
#define BP_LLWU_PE2_WUPE6 (4U) //!< Bit position for LLWU_PE2_WUPE6.
#define BM_LLWU_PE2_WUPE6 (0x30U) //!< Bit mask for LLWU_PE2_WUPE6.
#define BS_LLWU_PE2_WUPE6 (2U) //!< Bit field size in bits for LLWU_PE2_WUPE6.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_PE2_WUPE6 field.
#define BR_LLWU_PE2_WUPE6 (HW_LLWU_PE2.B.WUPE6)
#endif
//! @brief Format value for bitfield LLWU_PE2_WUPE6.
#define BF_LLWU_PE2_WUPE6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_PE2_WUPE6), uint8_t) & BM_LLWU_PE2_WUPE6)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUPE6 field to a new value.
#define BW_LLWU_PE2_WUPE6(v) (HW_LLWU_PE2_WR((HW_LLWU_PE2_RD() & ~BM_LLWU_PE2_WUPE6) | BF_LLWU_PE2_WUPE6(v)))
#endif
//@}
/*!
* @name Register LLWU_PE2, field WUPE7[7:6] (RW)
*
* Enables and configures the edge detection for the wakeup pin.
*
* Values:
* - 00 - External input pin disabled as wakeup input
* - 01 - External input pin enabled with rising edge detection
* - 10 - External input pin enabled with falling edge detection
* - 11 - External input pin enabled with any change detection
*/
//@{
#define BP_LLWU_PE2_WUPE7 (6U) //!< Bit position for LLWU_PE2_WUPE7.
#define BM_LLWU_PE2_WUPE7 (0xC0U) //!< Bit mask for LLWU_PE2_WUPE7.
#define BS_LLWU_PE2_WUPE7 (2U) //!< Bit field size in bits for LLWU_PE2_WUPE7.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_PE2_WUPE7 field.
#define BR_LLWU_PE2_WUPE7 (HW_LLWU_PE2.B.WUPE7)
#endif
//! @brief Format value for bitfield LLWU_PE2_WUPE7.
#define BF_LLWU_PE2_WUPE7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_PE2_WUPE7), uint8_t) & BM_LLWU_PE2_WUPE7)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUPE7 field to a new value.
#define BW_LLWU_PE2_WUPE7(v) (HW_LLWU_PE2_WR((HW_LLWU_PE2_RD() & ~BM_LLWU_PE2_WUPE7) | BF_LLWU_PE2_WUPE7(v)))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_LLWU_PE3 - LLWU Pin Enable 3 register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_LLWU_PE3 - LLWU Pin Enable 3 register (RW)
*
* Reset value: 0x00U
*
* LLWU_PE3 contains the field to enable and select the edge detect type for the
* external wakeup input pins LLWU_P11-LLWU_P8. This register is reset on Chip
* Reset not VLLS and by reset types that trigger Chip Reset not VLLS. It is
* unaffected by reset types that do not trigger Chip Reset not VLLS. See the
* IntroductionInformation found here describes the registers of the Reset Control Module
* (RCM). The RCM implements many of the reset functions for the chip. See the
* chip's reset chapter for more information. details for more information.
*/
typedef union _hw_llwu_pe3
{
uint8_t U;
struct _hw_llwu_pe3_bitfields
{
uint8_t WUPE8 : 2; //!< [1:0] Wakeup Pin Enable For LLWU_P8
uint8_t WUPE9 : 2; //!< [3:2] Wakeup Pin Enable For LLWU_P9
uint8_t WUPE10 : 2; //!< [5:4] Wakeup Pin Enable For LLWU_P10
uint8_t WUPE11 : 2; //!< [7:6] Wakeup Pin Enable For LLWU_P11
} B;
} hw_llwu_pe3_t;
#endif
/*!
* @name Constants and macros for entire LLWU_PE3 register
*/
//@{
#define HW_LLWU_PE3_ADDR (REGS_LLWU_BASE + 0x2U)
#ifndef __LANGUAGE_ASM__
#define HW_LLWU_PE3 (*(__IO hw_llwu_pe3_t *) HW_LLWU_PE3_ADDR)
#define HW_LLWU_PE3_RD() (HW_LLWU_PE3.U)
#define HW_LLWU_PE3_WR(v) (HW_LLWU_PE3.U = (v))
#define HW_LLWU_PE3_SET(v) (HW_LLWU_PE3_WR(HW_LLWU_PE3_RD() | (v)))
#define HW_LLWU_PE3_CLR(v) (HW_LLWU_PE3_WR(HW_LLWU_PE3_RD() & ~(v)))
#define HW_LLWU_PE3_TOG(v) (HW_LLWU_PE3_WR(HW_LLWU_PE3_RD() ^ (v)))
#endif
//@}
/*
* Constants & macros for individual LLWU_PE3 bitfields
*/
/*!
* @name Register LLWU_PE3, field WUPE8[1:0] (RW)
*
* Enables and configures the edge detection for the wakeup pin.
*
* Values:
* - 00 - External input pin disabled as wakeup input
* - 01 - External input pin enabled with rising edge detection
* - 10 - External input pin enabled with falling edge detection
* - 11 - External input pin enabled with any change detection
*/
//@{
#define BP_LLWU_PE3_WUPE8 (0U) //!< Bit position for LLWU_PE3_WUPE8.
#define BM_LLWU_PE3_WUPE8 (0x03U) //!< Bit mask for LLWU_PE3_WUPE8.
#define BS_LLWU_PE3_WUPE8 (2U) //!< Bit field size in bits for LLWU_PE3_WUPE8.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_PE3_WUPE8 field.
#define BR_LLWU_PE3_WUPE8 (HW_LLWU_PE3.B.WUPE8)
#endif
//! @brief Format value for bitfield LLWU_PE3_WUPE8.
#define BF_LLWU_PE3_WUPE8(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_PE3_WUPE8), uint8_t) & BM_LLWU_PE3_WUPE8)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUPE8 field to a new value.
#define BW_LLWU_PE3_WUPE8(v) (HW_LLWU_PE3_WR((HW_LLWU_PE3_RD() & ~BM_LLWU_PE3_WUPE8) | BF_LLWU_PE3_WUPE8(v)))
#endif
//@}
/*!
* @name Register LLWU_PE3, field WUPE9[3:2] (RW)
*
* Enables and configures the edge detection for the wakeup pin.
*
* Values:
* - 00 - External input pin disabled as wakeup input
* - 01 - External input pin enabled with rising edge detection
* - 10 - External input pin enabled with falling edge detection
* - 11 - External input pin enabled with any change detection
*/
//@{
#define BP_LLWU_PE3_WUPE9 (2U) //!< Bit position for LLWU_PE3_WUPE9.
#define BM_LLWU_PE3_WUPE9 (0x0CU) //!< Bit mask for LLWU_PE3_WUPE9.
#define BS_LLWU_PE3_WUPE9 (2U) //!< Bit field size in bits for LLWU_PE3_WUPE9.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_PE3_WUPE9 field.
#define BR_LLWU_PE3_WUPE9 (HW_LLWU_PE3.B.WUPE9)
#endif
//! @brief Format value for bitfield LLWU_PE3_WUPE9.
#define BF_LLWU_PE3_WUPE9(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_PE3_WUPE9), uint8_t) & BM_LLWU_PE3_WUPE9)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUPE9 field to a new value.
#define BW_LLWU_PE3_WUPE9(v) (HW_LLWU_PE3_WR((HW_LLWU_PE3_RD() & ~BM_LLWU_PE3_WUPE9) | BF_LLWU_PE3_WUPE9(v)))
#endif
//@}
/*!
* @name Register LLWU_PE3, field WUPE10[5:4] (RW)
*
* Enables and configures the edge detection for the wakeup pin.
*
* Values:
* - 00 - External input pin disabled as wakeup input
* - 01 - External input pin enabled with rising edge detection
* - 10 - External input pin enabled with falling edge detection
* - 11 - External input pin enabled with any change detection
*/
//@{
#define BP_LLWU_PE3_WUPE10 (4U) //!< Bit position for LLWU_PE3_WUPE10.
#define BM_LLWU_PE3_WUPE10 (0x30U) //!< Bit mask for LLWU_PE3_WUPE10.
#define BS_LLWU_PE3_WUPE10 (2U) //!< Bit field size in bits for LLWU_PE3_WUPE10.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_PE3_WUPE10 field.
#define BR_LLWU_PE3_WUPE10 (HW_LLWU_PE3.B.WUPE10)
#endif
//! @brief Format value for bitfield LLWU_PE3_WUPE10.
#define BF_LLWU_PE3_WUPE10(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_PE3_WUPE10), uint8_t) & BM_LLWU_PE3_WUPE10)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUPE10 field to a new value.
#define BW_LLWU_PE3_WUPE10(v) (HW_LLWU_PE3_WR((HW_LLWU_PE3_RD() & ~BM_LLWU_PE3_WUPE10) | BF_LLWU_PE3_WUPE10(v)))
#endif
//@}
/*!
* @name Register LLWU_PE3, field WUPE11[7:6] (RW)
*
* Enables and configures the edge detection for the wakeup pin.
*
* Values:
* - 00 - External input pin disabled as wakeup input
* - 01 - External input pin enabled with rising edge detection
* - 10 - External input pin enabled with falling edge detection
* - 11 - External input pin enabled with any change detection
*/
//@{
#define BP_LLWU_PE3_WUPE11 (6U) //!< Bit position for LLWU_PE3_WUPE11.
#define BM_LLWU_PE3_WUPE11 (0xC0U) //!< Bit mask for LLWU_PE3_WUPE11.
#define BS_LLWU_PE3_WUPE11 (2U) //!< Bit field size in bits for LLWU_PE3_WUPE11.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_PE3_WUPE11 field.
#define BR_LLWU_PE3_WUPE11 (HW_LLWU_PE3.B.WUPE11)
#endif
//! @brief Format value for bitfield LLWU_PE3_WUPE11.
#define BF_LLWU_PE3_WUPE11(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_PE3_WUPE11), uint8_t) & BM_LLWU_PE3_WUPE11)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUPE11 field to a new value.
#define BW_LLWU_PE3_WUPE11(v) (HW_LLWU_PE3_WR((HW_LLWU_PE3_RD() & ~BM_LLWU_PE3_WUPE11) | BF_LLWU_PE3_WUPE11(v)))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_LLWU_PE4 - LLWU Pin Enable 4 register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_LLWU_PE4 - LLWU Pin Enable 4 register (RW)
*
* Reset value: 0x00U
*
* LLWU_PE4 contains the field to enable and select the edge detect type for the
* external wakeup input pins LLWU_P15-LLWU_P12. This register is reset on Chip
* Reset not VLLS and by reset types that trigger Chip Reset not VLLS. It is
* unaffected by reset types that do not trigger Chip Reset not VLLS. See the
* IntroductionInformation found here describes the registers of the Reset Control
* Module (RCM). The RCM implements many of the reset functions for the chip. See the
* chip's reset chapter for more information. details for more information.
*/
typedef union _hw_llwu_pe4
{
uint8_t U;
struct _hw_llwu_pe4_bitfields
{
uint8_t WUPE12 : 2; //!< [1:0] Wakeup Pin Enable For LLWU_P12
uint8_t WUPE13 : 2; //!< [3:2] Wakeup Pin Enable For LLWU_P13
uint8_t WUPE14 : 2; //!< [5:4] Wakeup Pin Enable For LLWU_P14
uint8_t WUPE15 : 2; //!< [7:6] Wakeup Pin Enable For LLWU_P15
} B;
} hw_llwu_pe4_t;
#endif
/*!
* @name Constants and macros for entire LLWU_PE4 register
*/
//@{
#define HW_LLWU_PE4_ADDR (REGS_LLWU_BASE + 0x3U)
#ifndef __LANGUAGE_ASM__
#define HW_LLWU_PE4 (*(__IO hw_llwu_pe4_t *) HW_LLWU_PE4_ADDR)
#define HW_LLWU_PE4_RD() (HW_LLWU_PE4.U)
#define HW_LLWU_PE4_WR(v) (HW_LLWU_PE4.U = (v))
#define HW_LLWU_PE4_SET(v) (HW_LLWU_PE4_WR(HW_LLWU_PE4_RD() | (v)))
#define HW_LLWU_PE4_CLR(v) (HW_LLWU_PE4_WR(HW_LLWU_PE4_RD() & ~(v)))
#define HW_LLWU_PE4_TOG(v) (HW_LLWU_PE4_WR(HW_LLWU_PE4_RD() ^ (v)))
#endif
//@}
/*
* Constants & macros for individual LLWU_PE4 bitfields
*/
/*!
* @name Register LLWU_PE4, field WUPE12[1:0] (RW)
*
* Enables and configures the edge detection for the wakeup pin.
*
* Values:
* - 00 - External input pin disabled as wakeup input
* - 01 - External input pin enabled with rising edge detection
* - 10 - External input pin enabled with falling edge detection
* - 11 - External input pin enabled with any change detection
*/
//@{
#define BP_LLWU_PE4_WUPE12 (0U) //!< Bit position for LLWU_PE4_WUPE12.
#define BM_LLWU_PE4_WUPE12 (0x03U) //!< Bit mask for LLWU_PE4_WUPE12.
#define BS_LLWU_PE4_WUPE12 (2U) //!< Bit field size in bits for LLWU_PE4_WUPE12.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_PE4_WUPE12 field.
#define BR_LLWU_PE4_WUPE12 (HW_LLWU_PE4.B.WUPE12)
#endif
//! @brief Format value for bitfield LLWU_PE4_WUPE12.
#define BF_LLWU_PE4_WUPE12(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_PE4_WUPE12), uint8_t) & BM_LLWU_PE4_WUPE12)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUPE12 field to a new value.
#define BW_LLWU_PE4_WUPE12(v) (HW_LLWU_PE4_WR((HW_LLWU_PE4_RD() & ~BM_LLWU_PE4_WUPE12) | BF_LLWU_PE4_WUPE12(v)))
#endif
//@}
/*!
* @name Register LLWU_PE4, field WUPE13[3:2] (RW)
*
* Enables and configures the edge detection for the wakeup pin.
*
* Values:
* - 00 - External input pin disabled as wakeup input
* - 01 - External input pin enabled with rising edge detection
* - 10 - External input pin enabled with falling edge detection
* - 11 - External input pin enabled with any change detection
*/
//@{
#define BP_LLWU_PE4_WUPE13 (2U) //!< Bit position for LLWU_PE4_WUPE13.
#define BM_LLWU_PE4_WUPE13 (0x0CU) //!< Bit mask for LLWU_PE4_WUPE13.
#define BS_LLWU_PE4_WUPE13 (2U) //!< Bit field size in bits for LLWU_PE4_WUPE13.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_PE4_WUPE13 field.
#define BR_LLWU_PE4_WUPE13 (HW_LLWU_PE4.B.WUPE13)
#endif
//! @brief Format value for bitfield LLWU_PE4_WUPE13.
#define BF_LLWU_PE4_WUPE13(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_PE4_WUPE13), uint8_t) & BM_LLWU_PE4_WUPE13)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUPE13 field to a new value.
#define BW_LLWU_PE4_WUPE13(v) (HW_LLWU_PE4_WR((HW_LLWU_PE4_RD() & ~BM_LLWU_PE4_WUPE13) | BF_LLWU_PE4_WUPE13(v)))
#endif
//@}
/*!
* @name Register LLWU_PE4, field WUPE14[5:4] (RW)
*
* Enables and configures the edge detection for the wakeup pin.
*
* Values:
* - 00 - External input pin disabled as wakeup input
* - 01 - External input pin enabled with rising edge detection
* - 10 - External input pin enabled with falling edge detection
* - 11 - External input pin enabled with any change detection
*/
//@{
#define BP_LLWU_PE4_WUPE14 (4U) //!< Bit position for LLWU_PE4_WUPE14.
#define BM_LLWU_PE4_WUPE14 (0x30U) //!< Bit mask for LLWU_PE4_WUPE14.
#define BS_LLWU_PE4_WUPE14 (2U) //!< Bit field size in bits for LLWU_PE4_WUPE14.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_PE4_WUPE14 field.
#define BR_LLWU_PE4_WUPE14 (HW_LLWU_PE4.B.WUPE14)
#endif
//! @brief Format value for bitfield LLWU_PE4_WUPE14.
#define BF_LLWU_PE4_WUPE14(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_PE4_WUPE14), uint8_t) & BM_LLWU_PE4_WUPE14)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUPE14 field to a new value.
#define BW_LLWU_PE4_WUPE14(v) (HW_LLWU_PE4_WR((HW_LLWU_PE4_RD() & ~BM_LLWU_PE4_WUPE14) | BF_LLWU_PE4_WUPE14(v)))
#endif
//@}
/*!
* @name Register LLWU_PE4, field WUPE15[7:6] (RW)
*
* Enables and configures the edge detection for the wakeup pin.
*
* Values:
* - 00 - External input pin disabled as wakeup input
* - 01 - External input pin enabled with rising edge detection
* - 10 - External input pin enabled with falling edge detection
* - 11 - External input pin enabled with any change detection
*/
//@{
#define BP_LLWU_PE4_WUPE15 (6U) //!< Bit position for LLWU_PE4_WUPE15.
#define BM_LLWU_PE4_WUPE15 (0xC0U) //!< Bit mask for LLWU_PE4_WUPE15.
#define BS_LLWU_PE4_WUPE15 (2U) //!< Bit field size in bits for LLWU_PE4_WUPE15.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_PE4_WUPE15 field.
#define BR_LLWU_PE4_WUPE15 (HW_LLWU_PE4.B.WUPE15)
#endif
//! @brief Format value for bitfield LLWU_PE4_WUPE15.
#define BF_LLWU_PE4_WUPE15(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_PE4_WUPE15), uint8_t) & BM_LLWU_PE4_WUPE15)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUPE15 field to a new value.
#define BW_LLWU_PE4_WUPE15(v) (HW_LLWU_PE4_WR((HW_LLWU_PE4_RD() & ~BM_LLWU_PE4_WUPE15) | BF_LLWU_PE4_WUPE15(v)))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_LLWU_ME - LLWU Module Enable register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_LLWU_ME - LLWU Module Enable register (RW)
*
* Reset value: 0x00U
*
* LLWU_ME contains the bits to enable the internal module flag as a wakeup
* input source for inputs MWUF7-MWUF0. This register is reset on Chip Reset not VLLS
* and by reset types that trigger Chip Reset not VLLS. It is unaffected by
* reset types that do not trigger Chip Reset not VLLS. See the
* IntroductionInformation found here describes the registers of the Reset Control Module (RCM). The
* RCM implements many of the reset functions for the chip. See the chip's reset
* chapter for more information. details for more information.
*/
typedef union _hw_llwu_me
{
uint8_t U;
struct _hw_llwu_me_bitfields
{
uint8_t WUME0 : 1; //!< [0] Wakeup Module Enable For Module 0
uint8_t WUME1 : 1; //!< [1] Wakeup Module Enable for Module 1
uint8_t WUME2 : 1; //!< [2] Wakeup Module Enable For Module 2
uint8_t WUME3 : 1; //!< [3] Wakeup Module Enable For Module 3
uint8_t WUME4 : 1; //!< [4] Wakeup Module Enable For Module 4
uint8_t WUME5 : 1; //!< [5] Wakeup Module Enable For Module 5
uint8_t WUME6 : 1; //!< [6] Wakeup Module Enable For Module 6
uint8_t WUME7 : 1; //!< [7] Wakeup Module Enable For Module 7
} B;
} hw_llwu_me_t;
#endif
/*!
* @name Constants and macros for entire LLWU_ME register
*/
//@{
#define HW_LLWU_ME_ADDR (REGS_LLWU_BASE + 0x4U)
#ifndef __LANGUAGE_ASM__
#define HW_LLWU_ME (*(__IO hw_llwu_me_t *) HW_LLWU_ME_ADDR)
#define HW_LLWU_ME_RD() (HW_LLWU_ME.U)
#define HW_LLWU_ME_WR(v) (HW_LLWU_ME.U = (v))
#define HW_LLWU_ME_SET(v) (HW_LLWU_ME_WR(HW_LLWU_ME_RD() | (v)))
#define HW_LLWU_ME_CLR(v) (HW_LLWU_ME_WR(HW_LLWU_ME_RD() & ~(v)))
#define HW_LLWU_ME_TOG(v) (HW_LLWU_ME_WR(HW_LLWU_ME_RD() ^ (v)))
#endif
//@}
/*
* Constants & macros for individual LLWU_ME bitfields
*/
/*!
* @name Register LLWU_ME, field WUME0[0] (RW)
*
* Enables an internal module as a wakeup source input.
*
* Values:
* - 0 - Internal module flag not used as wakeup source
* - 1 - Internal module flag used as wakeup source
*/
//@{
#define BP_LLWU_ME_WUME0 (0U) //!< Bit position for LLWU_ME_WUME0.
#define BM_LLWU_ME_WUME0 (0x01U) //!< Bit mask for LLWU_ME_WUME0.
#define BS_LLWU_ME_WUME0 (1U) //!< Bit field size in bits for LLWU_ME_WUME0.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_ME_WUME0 field.
#define BR_LLWU_ME_WUME0 (BITBAND_ACCESS8(HW_LLWU_ME_ADDR, BP_LLWU_ME_WUME0))
#endif
//! @brief Format value for bitfield LLWU_ME_WUME0.
#define BF_LLWU_ME_WUME0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_ME_WUME0), uint8_t) & BM_LLWU_ME_WUME0)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUME0 field to a new value.
#define BW_LLWU_ME_WUME0(v) (BITBAND_ACCESS8(HW_LLWU_ME_ADDR, BP_LLWU_ME_WUME0) = (v))
#endif
//@}
/*!
* @name Register LLWU_ME, field WUME1[1] (RW)
*
* Enables an internal module as a wakeup source input.
*
* Values:
* - 0 - Internal module flag not used as wakeup source
* - 1 - Internal module flag used as wakeup source
*/
//@{
#define BP_LLWU_ME_WUME1 (1U) //!< Bit position for LLWU_ME_WUME1.
#define BM_LLWU_ME_WUME1 (0x02U) //!< Bit mask for LLWU_ME_WUME1.
#define BS_LLWU_ME_WUME1 (1U) //!< Bit field size in bits for LLWU_ME_WUME1.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_ME_WUME1 field.
#define BR_LLWU_ME_WUME1 (BITBAND_ACCESS8(HW_LLWU_ME_ADDR, BP_LLWU_ME_WUME1))
#endif
//! @brief Format value for bitfield LLWU_ME_WUME1.
#define BF_LLWU_ME_WUME1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_ME_WUME1), uint8_t) & BM_LLWU_ME_WUME1)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUME1 field to a new value.
#define BW_LLWU_ME_WUME1(v) (BITBAND_ACCESS8(HW_LLWU_ME_ADDR, BP_LLWU_ME_WUME1) = (v))
#endif
//@}
/*!
* @name Register LLWU_ME, field WUME2[2] (RW)
*
* Enables an internal module as a wakeup source input.
*
* Values:
* - 0 - Internal module flag not used as wakeup source
* - 1 - Internal module flag used as wakeup source
*/
//@{
#define BP_LLWU_ME_WUME2 (2U) //!< Bit position for LLWU_ME_WUME2.
#define BM_LLWU_ME_WUME2 (0x04U) //!< Bit mask for LLWU_ME_WUME2.
#define BS_LLWU_ME_WUME2 (1U) //!< Bit field size in bits for LLWU_ME_WUME2.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_ME_WUME2 field.
#define BR_LLWU_ME_WUME2 (BITBAND_ACCESS8(HW_LLWU_ME_ADDR, BP_LLWU_ME_WUME2))
#endif
//! @brief Format value for bitfield LLWU_ME_WUME2.
#define BF_LLWU_ME_WUME2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_ME_WUME2), uint8_t) & BM_LLWU_ME_WUME2)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUME2 field to a new value.
#define BW_LLWU_ME_WUME2(v) (BITBAND_ACCESS8(HW_LLWU_ME_ADDR, BP_LLWU_ME_WUME2) = (v))
#endif
//@}
/*!
* @name Register LLWU_ME, field WUME3[3] (RW)
*
* Enables an internal module as a wakeup source input.
*
* Values:
* - 0 - Internal module flag not used as wakeup source
* - 1 - Internal module flag used as wakeup source
*/
//@{
#define BP_LLWU_ME_WUME3 (3U) //!< Bit position for LLWU_ME_WUME3.
#define BM_LLWU_ME_WUME3 (0x08U) //!< Bit mask for LLWU_ME_WUME3.
#define BS_LLWU_ME_WUME3 (1U) //!< Bit field size in bits for LLWU_ME_WUME3.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_ME_WUME3 field.
#define BR_LLWU_ME_WUME3 (BITBAND_ACCESS8(HW_LLWU_ME_ADDR, BP_LLWU_ME_WUME3))
#endif
//! @brief Format value for bitfield LLWU_ME_WUME3.
#define BF_LLWU_ME_WUME3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_ME_WUME3), uint8_t) & BM_LLWU_ME_WUME3)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUME3 field to a new value.
#define BW_LLWU_ME_WUME3(v) (BITBAND_ACCESS8(HW_LLWU_ME_ADDR, BP_LLWU_ME_WUME3) = (v))
#endif
//@}
/*!
* @name Register LLWU_ME, field WUME4[4] (RW)
*
* Enables an internal module as a wakeup source input.
*
* Values:
* - 0 - Internal module flag not used as wakeup source
* - 1 - Internal module flag used as wakeup source
*/
//@{
#define BP_LLWU_ME_WUME4 (4U) //!< Bit position for LLWU_ME_WUME4.
#define BM_LLWU_ME_WUME4 (0x10U) //!< Bit mask for LLWU_ME_WUME4.
#define BS_LLWU_ME_WUME4 (1U) //!< Bit field size in bits for LLWU_ME_WUME4.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_ME_WUME4 field.
#define BR_LLWU_ME_WUME4 (BITBAND_ACCESS8(HW_LLWU_ME_ADDR, BP_LLWU_ME_WUME4))
#endif
//! @brief Format value for bitfield LLWU_ME_WUME4.
#define BF_LLWU_ME_WUME4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_ME_WUME4), uint8_t) & BM_LLWU_ME_WUME4)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUME4 field to a new value.
#define BW_LLWU_ME_WUME4(v) (BITBAND_ACCESS8(HW_LLWU_ME_ADDR, BP_LLWU_ME_WUME4) = (v))
#endif
//@}
/*!
* @name Register LLWU_ME, field WUME5[5] (RW)
*
* Enables an internal module as a wakeup source input.
*
* Values:
* - 0 - Internal module flag not used as wakeup source
* - 1 - Internal module flag used as wakeup source
*/
//@{
#define BP_LLWU_ME_WUME5 (5U) //!< Bit position for LLWU_ME_WUME5.
#define BM_LLWU_ME_WUME5 (0x20U) //!< Bit mask for LLWU_ME_WUME5.
#define BS_LLWU_ME_WUME5 (1U) //!< Bit field size in bits for LLWU_ME_WUME5.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_ME_WUME5 field.
#define BR_LLWU_ME_WUME5 (BITBAND_ACCESS8(HW_LLWU_ME_ADDR, BP_LLWU_ME_WUME5))
#endif
//! @brief Format value for bitfield LLWU_ME_WUME5.
#define BF_LLWU_ME_WUME5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_ME_WUME5), uint8_t) & BM_LLWU_ME_WUME5)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUME5 field to a new value.
#define BW_LLWU_ME_WUME5(v) (BITBAND_ACCESS8(HW_LLWU_ME_ADDR, BP_LLWU_ME_WUME5) = (v))
#endif
//@}
/*!
* @name Register LLWU_ME, field WUME6[6] (RW)
*
* Enables an internal module as a wakeup source input.
*
* Values:
* - 0 - Internal module flag not used as wakeup source
* - 1 - Internal module flag used as wakeup source
*/
//@{
#define BP_LLWU_ME_WUME6 (6U) //!< Bit position for LLWU_ME_WUME6.
#define BM_LLWU_ME_WUME6 (0x40U) //!< Bit mask for LLWU_ME_WUME6.
#define BS_LLWU_ME_WUME6 (1U) //!< Bit field size in bits for LLWU_ME_WUME6.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_ME_WUME6 field.
#define BR_LLWU_ME_WUME6 (BITBAND_ACCESS8(HW_LLWU_ME_ADDR, BP_LLWU_ME_WUME6))
#endif
//! @brief Format value for bitfield LLWU_ME_WUME6.
#define BF_LLWU_ME_WUME6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_ME_WUME6), uint8_t) & BM_LLWU_ME_WUME6)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUME6 field to a new value.
#define BW_LLWU_ME_WUME6(v) (BITBAND_ACCESS8(HW_LLWU_ME_ADDR, BP_LLWU_ME_WUME6) = (v))
#endif
//@}
/*!
* @name Register LLWU_ME, field WUME7[7] (RW)
*
* Enables an internal module as a wakeup source input.
*
* Values:
* - 0 - Internal module flag not used as wakeup source
* - 1 - Internal module flag used as wakeup source
*/
//@{
#define BP_LLWU_ME_WUME7 (7U) //!< Bit position for LLWU_ME_WUME7.
#define BM_LLWU_ME_WUME7 (0x80U) //!< Bit mask for LLWU_ME_WUME7.
#define BS_LLWU_ME_WUME7 (1U) //!< Bit field size in bits for LLWU_ME_WUME7.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_ME_WUME7 field.
#define BR_LLWU_ME_WUME7 (BITBAND_ACCESS8(HW_LLWU_ME_ADDR, BP_LLWU_ME_WUME7))
#endif
//! @brief Format value for bitfield LLWU_ME_WUME7.
#define BF_LLWU_ME_WUME7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_ME_WUME7), uint8_t) & BM_LLWU_ME_WUME7)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUME7 field to a new value.
#define BW_LLWU_ME_WUME7(v) (BITBAND_ACCESS8(HW_LLWU_ME_ADDR, BP_LLWU_ME_WUME7) = (v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_LLWU_F1 - LLWU Flag 1 register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_LLWU_F1 - LLWU Flag 1 register (W1C)
*
* Reset value: 0x00U
*
* LLWU_F1 contains the wakeup flags indicating which wakeup source caused the
* MCU to exit LLS or VLLS mode. For LLS, this is the source causing the CPU
* interrupt flow. For VLLS, this is the source causing the MCU reset flow. The
* external wakeup flags are read-only and clearing a flag is accomplished by a write
* of a 1 to the corresponding WUFx bit. The wakeup flag (WUFx), if set, will
* remain set if the associated WUPEx bit is cleared. This register is reset on Chip
* Reset not VLLS and by reset types that trigger Chip Reset not VLLS. It is
* unaffected by reset types that do not trigger Chip Reset not VLLS. See the
* IntroductionInformation found here describes the registers of the Reset Control
* Module (RCM). The RCM implements many of the reset functions for the chip. See the
* chip's reset chapter for more information. details for more information.
*/
typedef union _hw_llwu_f1
{
uint8_t U;
struct _hw_llwu_f1_bitfields
{
uint8_t WUF0 : 1; //!< [0] Wakeup Flag For LLWU_P0
uint8_t WUF1 : 1; //!< [1] Wakeup Flag For LLWU_P1
uint8_t WUF2 : 1; //!< [2] Wakeup Flag For LLWU_P2
uint8_t WUF3 : 1; //!< [3] Wakeup Flag For LLWU_P3
uint8_t WUF4 : 1; //!< [4] Wakeup Flag For LLWU_P4
uint8_t WUF5 : 1; //!< [5] Wakeup Flag For LLWU_P5
uint8_t WUF6 : 1; //!< [6] Wakeup Flag For LLWU_P6
uint8_t WUF7 : 1; //!< [7] Wakeup Flag For LLWU_P7
} B;
} hw_llwu_f1_t;
#endif
/*!
* @name Constants and macros for entire LLWU_F1 register
*/
//@{
#define HW_LLWU_F1_ADDR (REGS_LLWU_BASE + 0x5U)
#ifndef __LANGUAGE_ASM__
#define HW_LLWU_F1 (*(__IO hw_llwu_f1_t *) HW_LLWU_F1_ADDR)
#define HW_LLWU_F1_RD() (HW_LLWU_F1.U)
#define HW_LLWU_F1_WR(v) (HW_LLWU_F1.U = (v))
#define HW_LLWU_F1_SET(v) (HW_LLWU_F1_WR(HW_LLWU_F1_RD() | (v)))
#define HW_LLWU_F1_CLR(v) (HW_LLWU_F1_WR(HW_LLWU_F1_RD() & ~(v)))
#define HW_LLWU_F1_TOG(v) (HW_LLWU_F1_WR(HW_LLWU_F1_RD() ^ (v)))
#endif
//@}
/*
* Constants & macros for individual LLWU_F1 bitfields
*/
/*!
* @name Register LLWU_F1, field WUF0[0] (W1C)
*
* Indicates that an enabled external wake-up pin was a source of exiting a
* low-leakage power mode. To clear the flag, write a 1 to WUF0.
*
* Values:
* - 0 - LLWU_P0 input was not a wakeup source
* - 1 - LLWU_P0 input was a wakeup source
*/
//@{
#define BP_LLWU_F1_WUF0 (0U) //!< Bit position for LLWU_F1_WUF0.
#define BM_LLWU_F1_WUF0 (0x01U) //!< Bit mask for LLWU_F1_WUF0.
#define BS_LLWU_F1_WUF0 (1U) //!< Bit field size in bits for LLWU_F1_WUF0.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_F1_WUF0 field.
#define BR_LLWU_F1_WUF0 (BITBAND_ACCESS8(HW_LLWU_F1_ADDR, BP_LLWU_F1_WUF0))
#endif
//! @brief Format value for bitfield LLWU_F1_WUF0.
#define BF_LLWU_F1_WUF0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_F1_WUF0), uint8_t) & BM_LLWU_F1_WUF0)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUF0 field to a new value.
#define BW_LLWU_F1_WUF0(v) (BITBAND_ACCESS8(HW_LLWU_F1_ADDR, BP_LLWU_F1_WUF0) = (v))
#endif
//@}
/*!
* @name Register LLWU_F1, field WUF1[1] (W1C)
*
* Indicates that an enabled external wakeup pin was a source of exiting a
* low-leakage power mode. To clear the flag, write a 1 to WUF1.
*
* Values:
* - 0 - LLWU_P1 input was not a wakeup source
* - 1 - LLWU_P1 input was a wakeup source
*/
//@{
#define BP_LLWU_F1_WUF1 (1U) //!< Bit position for LLWU_F1_WUF1.
#define BM_LLWU_F1_WUF1 (0x02U) //!< Bit mask for LLWU_F1_WUF1.
#define BS_LLWU_F1_WUF1 (1U) //!< Bit field size in bits for LLWU_F1_WUF1.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_F1_WUF1 field.
#define BR_LLWU_F1_WUF1 (BITBAND_ACCESS8(HW_LLWU_F1_ADDR, BP_LLWU_F1_WUF1))
#endif
//! @brief Format value for bitfield LLWU_F1_WUF1.
#define BF_LLWU_F1_WUF1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_F1_WUF1), uint8_t) & BM_LLWU_F1_WUF1)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUF1 field to a new value.
#define BW_LLWU_F1_WUF1(v) (BITBAND_ACCESS8(HW_LLWU_F1_ADDR, BP_LLWU_F1_WUF1) = (v))
#endif
//@}
/*!
* @name Register LLWU_F1, field WUF2[2] (W1C)
*
* Indicates that an enabled external wakeup pin was a source of exiting a
* low-leakage power mode. To clear the flag, write a 1 to WUF2.
*
* Values:
* - 0 - LLWU_P2 input was not a wakeup source
* - 1 - LLWU_P2 input was a wakeup source
*/
//@{
#define BP_LLWU_F1_WUF2 (2U) //!< Bit position for LLWU_F1_WUF2.
#define BM_LLWU_F1_WUF2 (0x04U) //!< Bit mask for LLWU_F1_WUF2.
#define BS_LLWU_F1_WUF2 (1U) //!< Bit field size in bits for LLWU_F1_WUF2.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_F1_WUF2 field.
#define BR_LLWU_F1_WUF2 (BITBAND_ACCESS8(HW_LLWU_F1_ADDR, BP_LLWU_F1_WUF2))
#endif
//! @brief Format value for bitfield LLWU_F1_WUF2.
#define BF_LLWU_F1_WUF2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_F1_WUF2), uint8_t) & BM_LLWU_F1_WUF2)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUF2 field to a new value.
#define BW_LLWU_F1_WUF2(v) (BITBAND_ACCESS8(HW_LLWU_F1_ADDR, BP_LLWU_F1_WUF2) = (v))
#endif
//@}
/*!
* @name Register LLWU_F1, field WUF3[3] (W1C)
*
* Indicates that an enabled external wakeup pin was a source of exiting a
* low-leakage power mode. To clear the flag, write a 1 to WUF3.
*
* Values:
* - 0 - LLWU_P3 input was not a wake-up source
* - 1 - LLWU_P3 input was a wake-up source
*/
//@{
#define BP_LLWU_F1_WUF3 (3U) //!< Bit position for LLWU_F1_WUF3.
#define BM_LLWU_F1_WUF3 (0x08U) //!< Bit mask for LLWU_F1_WUF3.
#define BS_LLWU_F1_WUF3 (1U) //!< Bit field size in bits for LLWU_F1_WUF3.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_F1_WUF3 field.
#define BR_LLWU_F1_WUF3 (BITBAND_ACCESS8(HW_LLWU_F1_ADDR, BP_LLWU_F1_WUF3))
#endif
//! @brief Format value for bitfield LLWU_F1_WUF3.
#define BF_LLWU_F1_WUF3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_F1_WUF3), uint8_t) & BM_LLWU_F1_WUF3)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUF3 field to a new value.
#define BW_LLWU_F1_WUF3(v) (BITBAND_ACCESS8(HW_LLWU_F1_ADDR, BP_LLWU_F1_WUF3) = (v))
#endif
//@}
/*!
* @name Register LLWU_F1, field WUF4[4] (W1C)
*
* Indicates that an enabled external wake-up pin was a source of exiting a
* low-leakage power mode. To clear the flag, write a 1 to WUF4.
*
* Values:
* - 0 - LLWU_P4 input was not a wakeup source
* - 1 - LLWU_P4 input was a wakeup source
*/
//@{
#define BP_LLWU_F1_WUF4 (4U) //!< Bit position for LLWU_F1_WUF4.
#define BM_LLWU_F1_WUF4 (0x10U) //!< Bit mask for LLWU_F1_WUF4.
#define BS_LLWU_F1_WUF4 (1U) //!< Bit field size in bits for LLWU_F1_WUF4.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_F1_WUF4 field.
#define BR_LLWU_F1_WUF4 (BITBAND_ACCESS8(HW_LLWU_F1_ADDR, BP_LLWU_F1_WUF4))
#endif
//! @brief Format value for bitfield LLWU_F1_WUF4.
#define BF_LLWU_F1_WUF4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_F1_WUF4), uint8_t) & BM_LLWU_F1_WUF4)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUF4 field to a new value.
#define BW_LLWU_F1_WUF4(v) (BITBAND_ACCESS8(HW_LLWU_F1_ADDR, BP_LLWU_F1_WUF4) = (v))
#endif
//@}
/*!
* @name Register LLWU_F1, field WUF5[5] (W1C)
*
* Indicates that an enabled external wakeup pin was a source of exiting a
* low-leakage power mode. To clear the flag, write a 1 to WUF5.
*
* Values:
* - 0 - LLWU_P5 input was not a wakeup source
* - 1 - LLWU_P5 input was a wakeup source
*/
//@{
#define BP_LLWU_F1_WUF5 (5U) //!< Bit position for LLWU_F1_WUF5.
#define BM_LLWU_F1_WUF5 (0x20U) //!< Bit mask for LLWU_F1_WUF5.
#define BS_LLWU_F1_WUF5 (1U) //!< Bit field size in bits for LLWU_F1_WUF5.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_F1_WUF5 field.
#define BR_LLWU_F1_WUF5 (BITBAND_ACCESS8(HW_LLWU_F1_ADDR, BP_LLWU_F1_WUF5))
#endif
//! @brief Format value for bitfield LLWU_F1_WUF5.
#define BF_LLWU_F1_WUF5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_F1_WUF5), uint8_t) & BM_LLWU_F1_WUF5)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUF5 field to a new value.
#define BW_LLWU_F1_WUF5(v) (BITBAND_ACCESS8(HW_LLWU_F1_ADDR, BP_LLWU_F1_WUF5) = (v))
#endif
//@}
/*!
* @name Register LLWU_F1, field WUF6[6] (W1C)
*
* Indicates that an enabled external wakeup pin was a source of exiting a
* low-leakage power mode. To clear the flag, write a 1 to WUF6.
*
* Values:
* - 0 - LLWU_P6 input was not a wakeup source
* - 1 - LLWU_P6 input was a wakeup source
*/
//@{
#define BP_LLWU_F1_WUF6 (6U) //!< Bit position for LLWU_F1_WUF6.
#define BM_LLWU_F1_WUF6 (0x40U) //!< Bit mask for LLWU_F1_WUF6.
#define BS_LLWU_F1_WUF6 (1U) //!< Bit field size in bits for LLWU_F1_WUF6.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_F1_WUF6 field.
#define BR_LLWU_F1_WUF6 (BITBAND_ACCESS8(HW_LLWU_F1_ADDR, BP_LLWU_F1_WUF6))
#endif
//! @brief Format value for bitfield LLWU_F1_WUF6.
#define BF_LLWU_F1_WUF6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_F1_WUF6), uint8_t) & BM_LLWU_F1_WUF6)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUF6 field to a new value.
#define BW_LLWU_F1_WUF6(v) (BITBAND_ACCESS8(HW_LLWU_F1_ADDR, BP_LLWU_F1_WUF6) = (v))
#endif
//@}
/*!
* @name Register LLWU_F1, field WUF7[7] (W1C)
*
* Indicates that an enabled external wakeup pin was a source of exiting a
* low-leakage power mode. To clear the flag, write a 1 to WUF7.
*
* Values:
* - 0 - LLWU_P7 input was not a wakeup source
* - 1 - LLWU_P7 input was a wakeup source
*/
//@{
#define BP_LLWU_F1_WUF7 (7U) //!< Bit position for LLWU_F1_WUF7.
#define BM_LLWU_F1_WUF7 (0x80U) //!< Bit mask for LLWU_F1_WUF7.
#define BS_LLWU_F1_WUF7 (1U) //!< Bit field size in bits for LLWU_F1_WUF7.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_F1_WUF7 field.
#define BR_LLWU_F1_WUF7 (BITBAND_ACCESS8(HW_LLWU_F1_ADDR, BP_LLWU_F1_WUF7))
#endif
//! @brief Format value for bitfield LLWU_F1_WUF7.
#define BF_LLWU_F1_WUF7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_F1_WUF7), uint8_t) & BM_LLWU_F1_WUF7)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUF7 field to a new value.
#define BW_LLWU_F1_WUF7(v) (BITBAND_ACCESS8(HW_LLWU_F1_ADDR, BP_LLWU_F1_WUF7) = (v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_LLWU_F2 - LLWU Flag 2 register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_LLWU_F2 - LLWU Flag 2 register (W1C)
*
* Reset value: 0x00U
*
* LLWU_F2 contains the wakeup flags indicating which wakeup source caused the
* MCU to exit LLS or VLLS mode. For LLS, this is the source causing the CPU
* interrupt flow. For VLLS, this is the source causing the MCU reset flow. The
* external wakeup flags are read-only and clearing a flag is accomplished by a write
* of a 1 to the corresponding WUFx bit. The wakeup flag (WUFx), if set, will
* remain set if the associated WUPEx bit is cleared. This register is reset on Chip
* Reset not VLLS and by reset types that trigger Chip Reset not VLLS. It is
* unaffected by reset types that do not trigger Chip Reset not VLLS. See the
* IntroductionInformation found here describes the registers of the Reset Control
* Module (RCM). The RCM implements many of the reset functions for the chip. See the
* chip's reset chapter for more information. details for more information.
*/
typedef union _hw_llwu_f2
{
uint8_t U;
struct _hw_llwu_f2_bitfields
{
uint8_t WUF8 : 1; //!< [0] Wakeup Flag For LLWU_P8
uint8_t WUF9 : 1; //!< [1] Wakeup Flag For LLWU_P9
uint8_t WUF10 : 1; //!< [2] Wakeup Flag For LLWU_P10
uint8_t WUF11 : 1; //!< [3] Wakeup Flag For LLWU_P11
uint8_t WUF12 : 1; //!< [4] Wakeup Flag For LLWU_P12
uint8_t WUF13 : 1; //!< [5] Wakeup Flag For LLWU_P13
uint8_t WUF14 : 1; //!< [6] Wakeup Flag For LLWU_P14
uint8_t WUF15 : 1; //!< [7] Wakeup Flag For LLWU_P15
} B;
} hw_llwu_f2_t;
#endif
/*!
* @name Constants and macros for entire LLWU_F2 register
*/
//@{
#define HW_LLWU_F2_ADDR (REGS_LLWU_BASE + 0x6U)
#ifndef __LANGUAGE_ASM__
#define HW_LLWU_F2 (*(__IO hw_llwu_f2_t *) HW_LLWU_F2_ADDR)
#define HW_LLWU_F2_RD() (HW_LLWU_F2.U)
#define HW_LLWU_F2_WR(v) (HW_LLWU_F2.U = (v))
#define HW_LLWU_F2_SET(v) (HW_LLWU_F2_WR(HW_LLWU_F2_RD() | (v)))
#define HW_LLWU_F2_CLR(v) (HW_LLWU_F2_WR(HW_LLWU_F2_RD() & ~(v)))
#define HW_LLWU_F2_TOG(v) (HW_LLWU_F2_WR(HW_LLWU_F2_RD() ^ (v)))
#endif
//@}
/*
* Constants & macros for individual LLWU_F2 bitfields
*/
/*!
* @name Register LLWU_F2, field WUF8[0] (W1C)
*
* Indicates that an enabled external wakeup pin was a source of exiting a
* low-leakage power mode. To clear the flag, write a 1 to WUF8.
*
* Values:
* - 0 - LLWU_P8 input was not a wakeup source
* - 1 - LLWU_P8 input was a wakeup source
*/
//@{
#define BP_LLWU_F2_WUF8 (0U) //!< Bit position for LLWU_F2_WUF8.
#define BM_LLWU_F2_WUF8 (0x01U) //!< Bit mask for LLWU_F2_WUF8.
#define BS_LLWU_F2_WUF8 (1U) //!< Bit field size in bits for LLWU_F2_WUF8.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_F2_WUF8 field.
#define BR_LLWU_F2_WUF8 (BITBAND_ACCESS8(HW_LLWU_F2_ADDR, BP_LLWU_F2_WUF8))
#endif
//! @brief Format value for bitfield LLWU_F2_WUF8.
#define BF_LLWU_F2_WUF8(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_F2_WUF8), uint8_t) & BM_LLWU_F2_WUF8)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUF8 field to a new value.
#define BW_LLWU_F2_WUF8(v) (BITBAND_ACCESS8(HW_LLWU_F2_ADDR, BP_LLWU_F2_WUF8) = (v))
#endif
//@}
/*!
* @name Register LLWU_F2, field WUF9[1] (W1C)
*
* Indicates that an enabled external wakeup pin was a source of exiting a
* low-leakage power mode. To clear the flag, write a 1 to WUF9.
*
* Values:
* - 0 - LLWU_P9 input was not a wakeup source
* - 1 - LLWU_P9 input was a wakeup source
*/
//@{
#define BP_LLWU_F2_WUF9 (1U) //!< Bit position for LLWU_F2_WUF9.
#define BM_LLWU_F2_WUF9 (0x02U) //!< Bit mask for LLWU_F2_WUF9.
#define BS_LLWU_F2_WUF9 (1U) //!< Bit field size in bits for LLWU_F2_WUF9.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_F2_WUF9 field.
#define BR_LLWU_F2_WUF9 (BITBAND_ACCESS8(HW_LLWU_F2_ADDR, BP_LLWU_F2_WUF9))
#endif
//! @brief Format value for bitfield LLWU_F2_WUF9.
#define BF_LLWU_F2_WUF9(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_F2_WUF9), uint8_t) & BM_LLWU_F2_WUF9)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUF9 field to a new value.
#define BW_LLWU_F2_WUF9(v) (BITBAND_ACCESS8(HW_LLWU_F2_ADDR, BP_LLWU_F2_WUF9) = (v))
#endif
//@}
/*!
* @name Register LLWU_F2, field WUF10[2] (W1C)
*
* Indicates that an enabled external wakeup pin was a source of exiting a
* low-leakage power mode. To clear the flag, write a 1 to WUF10.
*
* Values:
* - 0 - LLWU_P10 input was not a wakeup source
* - 1 - LLWU_P10 input was a wakeup source
*/
//@{
#define BP_LLWU_F2_WUF10 (2U) //!< Bit position for LLWU_F2_WUF10.
#define BM_LLWU_F2_WUF10 (0x04U) //!< Bit mask for LLWU_F2_WUF10.
#define BS_LLWU_F2_WUF10 (1U) //!< Bit field size in bits for LLWU_F2_WUF10.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_F2_WUF10 field.
#define BR_LLWU_F2_WUF10 (BITBAND_ACCESS8(HW_LLWU_F2_ADDR, BP_LLWU_F2_WUF10))
#endif
//! @brief Format value for bitfield LLWU_F2_WUF10.
#define BF_LLWU_F2_WUF10(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_F2_WUF10), uint8_t) & BM_LLWU_F2_WUF10)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUF10 field to a new value.
#define BW_LLWU_F2_WUF10(v) (BITBAND_ACCESS8(HW_LLWU_F2_ADDR, BP_LLWU_F2_WUF10) = (v))
#endif
//@}
/*!
* @name Register LLWU_F2, field WUF11[3] (W1C)
*
* Indicates that an enabled external wakeup pin was a source of exiting a
* low-leakage power mode. To clear the flag, write a 1 to WUF11.
*
* Values:
* - 0 - LLWU_P11 input was not a wakeup source
* - 1 - LLWU_P11 input was a wakeup source
*/
//@{
#define BP_LLWU_F2_WUF11 (3U) //!< Bit position for LLWU_F2_WUF11.
#define BM_LLWU_F2_WUF11 (0x08U) //!< Bit mask for LLWU_F2_WUF11.
#define BS_LLWU_F2_WUF11 (1U) //!< Bit field size in bits for LLWU_F2_WUF11.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_F2_WUF11 field.
#define BR_LLWU_F2_WUF11 (BITBAND_ACCESS8(HW_LLWU_F2_ADDR, BP_LLWU_F2_WUF11))
#endif
//! @brief Format value for bitfield LLWU_F2_WUF11.
#define BF_LLWU_F2_WUF11(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_F2_WUF11), uint8_t) & BM_LLWU_F2_WUF11)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUF11 field to a new value.
#define BW_LLWU_F2_WUF11(v) (BITBAND_ACCESS8(HW_LLWU_F2_ADDR, BP_LLWU_F2_WUF11) = (v))
#endif
//@}
/*!
* @name Register LLWU_F2, field WUF12[4] (W1C)
*
* Indicates that an enabled external wakeup pin was a source of exiting a
* low-leakage power mode. To clear the flag, write a 1 to WUF12.
*
* Values:
* - 0 - LLWU_P12 input was not a wakeup source
* - 1 - LLWU_P12 input was a wakeup source
*/
//@{
#define BP_LLWU_F2_WUF12 (4U) //!< Bit position for LLWU_F2_WUF12.
#define BM_LLWU_F2_WUF12 (0x10U) //!< Bit mask for LLWU_F2_WUF12.
#define BS_LLWU_F2_WUF12 (1U) //!< Bit field size in bits for LLWU_F2_WUF12.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_F2_WUF12 field.
#define BR_LLWU_F2_WUF12 (BITBAND_ACCESS8(HW_LLWU_F2_ADDR, BP_LLWU_F2_WUF12))
#endif
//! @brief Format value for bitfield LLWU_F2_WUF12.
#define BF_LLWU_F2_WUF12(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_F2_WUF12), uint8_t) & BM_LLWU_F2_WUF12)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUF12 field to a new value.
#define BW_LLWU_F2_WUF12(v) (BITBAND_ACCESS8(HW_LLWU_F2_ADDR, BP_LLWU_F2_WUF12) = (v))
#endif
//@}
/*!
* @name Register LLWU_F2, field WUF13[5] (W1C)
*
* Indicates that an enabled external wakeup pin was a source of exiting a
* low-leakage power mode. To clear the flag, write a 1 to WUF13.
*
* Values:
* - 0 - LLWU_P13 input was not a wakeup source
* - 1 - LLWU_P13 input was a wakeup source
*/
//@{
#define BP_LLWU_F2_WUF13 (5U) //!< Bit position for LLWU_F2_WUF13.
#define BM_LLWU_F2_WUF13 (0x20U) //!< Bit mask for LLWU_F2_WUF13.
#define BS_LLWU_F2_WUF13 (1U) //!< Bit field size in bits for LLWU_F2_WUF13.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_F2_WUF13 field.
#define BR_LLWU_F2_WUF13 (BITBAND_ACCESS8(HW_LLWU_F2_ADDR, BP_LLWU_F2_WUF13))
#endif
//! @brief Format value for bitfield LLWU_F2_WUF13.
#define BF_LLWU_F2_WUF13(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_F2_WUF13), uint8_t) & BM_LLWU_F2_WUF13)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUF13 field to a new value.
#define BW_LLWU_F2_WUF13(v) (BITBAND_ACCESS8(HW_LLWU_F2_ADDR, BP_LLWU_F2_WUF13) = (v))
#endif
//@}
/*!
* @name Register LLWU_F2, field WUF14[6] (W1C)
*
* Indicates that an enabled external wakeup pin was a source of exiting a
* low-leakage power mode. To clear the flag, write a 1 to WUF14.
*
* Values:
* - 0 - LLWU_P14 input was not a wakeup source
* - 1 - LLWU_P14 input was a wakeup source
*/
//@{
#define BP_LLWU_F2_WUF14 (6U) //!< Bit position for LLWU_F2_WUF14.
#define BM_LLWU_F2_WUF14 (0x40U) //!< Bit mask for LLWU_F2_WUF14.
#define BS_LLWU_F2_WUF14 (1U) //!< Bit field size in bits for LLWU_F2_WUF14.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_F2_WUF14 field.
#define BR_LLWU_F2_WUF14 (BITBAND_ACCESS8(HW_LLWU_F2_ADDR, BP_LLWU_F2_WUF14))
#endif
//! @brief Format value for bitfield LLWU_F2_WUF14.
#define BF_LLWU_F2_WUF14(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_F2_WUF14), uint8_t) & BM_LLWU_F2_WUF14)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUF14 field to a new value.
#define BW_LLWU_F2_WUF14(v) (BITBAND_ACCESS8(HW_LLWU_F2_ADDR, BP_LLWU_F2_WUF14) = (v))
#endif
//@}
/*!
* @name Register LLWU_F2, field WUF15[7] (W1C)
*
* Indicates that an enabled external wakeup pin was a source of exiting a
* low-leakage power mode. To clear the flag, write a 1 to WUF15.
*
* Values:
* - 0 - LLWU_P15 input was not a wakeup source
* - 1 - LLWU_P15 input was a wakeup source
*/
//@{
#define BP_LLWU_F2_WUF15 (7U) //!< Bit position for LLWU_F2_WUF15.
#define BM_LLWU_F2_WUF15 (0x80U) //!< Bit mask for LLWU_F2_WUF15.
#define BS_LLWU_F2_WUF15 (1U) //!< Bit field size in bits for LLWU_F2_WUF15.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_F2_WUF15 field.
#define BR_LLWU_F2_WUF15 (BITBAND_ACCESS8(HW_LLWU_F2_ADDR, BP_LLWU_F2_WUF15))
#endif
//! @brief Format value for bitfield LLWU_F2_WUF15.
#define BF_LLWU_F2_WUF15(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_F2_WUF15), uint8_t) & BM_LLWU_F2_WUF15)
#ifndef __LANGUAGE_ASM__
//! @brief Set the WUF15 field to a new value.
#define BW_LLWU_F2_WUF15(v) (BITBAND_ACCESS8(HW_LLWU_F2_ADDR, BP_LLWU_F2_WUF15) = (v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_LLWU_F3 - LLWU Flag 3 register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_LLWU_F3 - LLWU Flag 3 register (RO)
*
* Reset value: 0x00U
*
* LLWU_F3 contains the wakeup flags indicating which internal wakeup source
* caused the MCU to exit LLS or VLLS mode. For LLS, this is the source causing the
* CPU interrupt flow. For VLLS, this is the source causing the MCU reset flow.
* For internal peripherals that are capable of running in a low-leakage power
* mode, such as a real time clock module or CMP module, the flag from the
* associated peripheral is accessible as the MWUFx bit. The flag will need to be cleared
* in the peripheral instead of writing a 1 to the MWUFx bit. This register is
* reset on Chip Reset not VLLS and by reset types that trigger Chip Reset not
* VLLS. It is unaffected by reset types that do not trigger Chip Reset not VLLS. See
* the IntroductionInformation found here describes the registers of the Reset
* Control Module (RCM). The RCM implements many of the reset functions for the
* chip. See the chip's reset chapter for more information. details for more
* information.
*/
typedef union _hw_llwu_f3
{
uint8_t U;
struct _hw_llwu_f3_bitfields
{
uint8_t MWUF0 : 1; //!< [0] Wakeup flag For module 0
uint8_t MWUF1 : 1; //!< [1] Wakeup flag For module 1
uint8_t MWUF2 : 1; //!< [2] Wakeup flag For module 2
uint8_t MWUF3 : 1; //!< [3] Wakeup flag For module 3
uint8_t MWUF4 : 1; //!< [4] Wakeup flag For module 4
uint8_t MWUF5 : 1; //!< [5] Wakeup flag For module 5
uint8_t MWUF6 : 1; //!< [6] Wakeup flag For module 6
uint8_t MWUF7 : 1; //!< [7] Wakeup flag For module 7
} B;
} hw_llwu_f3_t;
#endif
/*!
* @name Constants and macros for entire LLWU_F3 register
*/
//@{
#define HW_LLWU_F3_ADDR (REGS_LLWU_BASE + 0x7U)
#ifndef __LANGUAGE_ASM__
#define HW_LLWU_F3 (*(__I hw_llwu_f3_t *) HW_LLWU_F3_ADDR)
#define HW_LLWU_F3_RD() (HW_LLWU_F3.U)
#endif
//@}
/*
* Constants & macros for individual LLWU_F3 bitfields
*/
/*!
* @name Register LLWU_F3, field MWUF0[0] (RO)
*
* Indicates that an enabled internal peripheral was a source of exiting a
* low-leakage power mode. To clear the flag, follow the internal peripheral flag
* clearing mechanism.
*
* Values:
* - 0 - Module 0 input was not a wakeup source
* - 1 - Module 0 input was a wakeup source
*/
//@{
#define BP_LLWU_F3_MWUF0 (0U) //!< Bit position for LLWU_F3_MWUF0.
#define BM_LLWU_F3_MWUF0 (0x01U) //!< Bit mask for LLWU_F3_MWUF0.
#define BS_LLWU_F3_MWUF0 (1U) //!< Bit field size in bits for LLWU_F3_MWUF0.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_F3_MWUF0 field.
#define BR_LLWU_F3_MWUF0 (BITBAND_ACCESS8(HW_LLWU_F3_ADDR, BP_LLWU_F3_MWUF0))
#endif
//@}
/*!
* @name Register LLWU_F3, field MWUF1[1] (RO)
*
* Indicates that an enabled internal peripheral was a source of exiting a
* low-leakage power mode. To clear the flag, follow the internal peripheral flag
* clearing mechanism.
*
* Values:
* - 0 - Module 1 input was not a wakeup source
* - 1 - Module 1 input was a wakeup source
*/
//@{
#define BP_LLWU_F3_MWUF1 (1U) //!< Bit position for LLWU_F3_MWUF1.
#define BM_LLWU_F3_MWUF1 (0x02U) //!< Bit mask for LLWU_F3_MWUF1.
#define BS_LLWU_F3_MWUF1 (1U) //!< Bit field size in bits for LLWU_F3_MWUF1.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_F3_MWUF1 field.
#define BR_LLWU_F3_MWUF1 (BITBAND_ACCESS8(HW_LLWU_F3_ADDR, BP_LLWU_F3_MWUF1))
#endif
//@}
/*!
* @name Register LLWU_F3, field MWUF2[2] (RO)
*
* Indicates that an enabled internal peripheral was a source of exiting a
* low-leakage power mode. To clear the flag, follow the internal peripheral flag
* clearing mechanism.
*
* Values:
* - 0 - Module 2 input was not a wakeup source
* - 1 - Module 2 input was a wakeup source
*/
//@{
#define BP_LLWU_F3_MWUF2 (2U) //!< Bit position for LLWU_F3_MWUF2.
#define BM_LLWU_F3_MWUF2 (0x04U) //!< Bit mask for LLWU_F3_MWUF2.
#define BS_LLWU_F3_MWUF2 (1U) //!< Bit field size in bits for LLWU_F3_MWUF2.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_F3_MWUF2 field.
#define BR_LLWU_F3_MWUF2 (BITBAND_ACCESS8(HW_LLWU_F3_ADDR, BP_LLWU_F3_MWUF2))
#endif
//@}
/*!
* @name Register LLWU_F3, field MWUF3[3] (RO)
*
* Indicates that an enabled internal peripheral was a source of exiting a
* low-leakage power mode. To clear the flag, follow the internal peripheral flag
* clearing mechanism.
*
* Values:
* - 0 - Module 3 input was not a wakeup source
* - 1 - Module 3 input was a wakeup source
*/
//@{
#define BP_LLWU_F3_MWUF3 (3U) //!< Bit position for LLWU_F3_MWUF3.
#define BM_LLWU_F3_MWUF3 (0x08U) //!< Bit mask for LLWU_F3_MWUF3.
#define BS_LLWU_F3_MWUF3 (1U) //!< Bit field size in bits for LLWU_F3_MWUF3.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_F3_MWUF3 field.
#define BR_LLWU_F3_MWUF3 (BITBAND_ACCESS8(HW_LLWU_F3_ADDR, BP_LLWU_F3_MWUF3))
#endif
//@}
/*!
* @name Register LLWU_F3, field MWUF4[4] (RO)
*
* Indicates that an enabled internal peripheral was a source of exiting a
* low-leakage power mode. To clear the flag, follow the internal peripheral flag
* clearing mechanism.
*
* Values:
* - 0 - Module 4 input was not a wakeup source
* - 1 - Module 4 input was a wakeup source
*/
//@{
#define BP_LLWU_F3_MWUF4 (4U) //!< Bit position for LLWU_F3_MWUF4.
#define BM_LLWU_F3_MWUF4 (0x10U) //!< Bit mask for LLWU_F3_MWUF4.
#define BS_LLWU_F3_MWUF4 (1U) //!< Bit field size in bits for LLWU_F3_MWUF4.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_F3_MWUF4 field.
#define BR_LLWU_F3_MWUF4 (BITBAND_ACCESS8(HW_LLWU_F3_ADDR, BP_LLWU_F3_MWUF4))
#endif
//@}
/*!
* @name Register LLWU_F3, field MWUF5[5] (RO)
*
* Indicates that an enabled internal peripheral was a source of exiting a
* low-leakage power mode. To clear the flag, follow the internal peripheral flag
* clearing mechanism.
*
* Values:
* - 0 - Module 5 input was not a wakeup source
* - 1 - Module 5 input was a wakeup source
*/
//@{
#define BP_LLWU_F3_MWUF5 (5U) //!< Bit position for LLWU_F3_MWUF5.
#define BM_LLWU_F3_MWUF5 (0x20U) //!< Bit mask for LLWU_F3_MWUF5.
#define BS_LLWU_F3_MWUF5 (1U) //!< Bit field size in bits for LLWU_F3_MWUF5.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_F3_MWUF5 field.
#define BR_LLWU_F3_MWUF5 (BITBAND_ACCESS8(HW_LLWU_F3_ADDR, BP_LLWU_F3_MWUF5))
#endif
//@}
/*!
* @name Register LLWU_F3, field MWUF6[6] (RO)
*
* Indicates that an enabled internal peripheral was a source of exiting a
* low-leakage power mode. To clear the flag, follow the internal peripheral flag
* clearing mechanism.
*
* Values:
* - 0 - Module 6 input was not a wakeup source
* - 1 - Module 6 input was a wakeup source
*/
//@{
#define BP_LLWU_F3_MWUF6 (6U) //!< Bit position for LLWU_F3_MWUF6.
#define BM_LLWU_F3_MWUF6 (0x40U) //!< Bit mask for LLWU_F3_MWUF6.
#define BS_LLWU_F3_MWUF6 (1U) //!< Bit field size in bits for LLWU_F3_MWUF6.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_F3_MWUF6 field.
#define BR_LLWU_F3_MWUF6 (BITBAND_ACCESS8(HW_LLWU_F3_ADDR, BP_LLWU_F3_MWUF6))
#endif
//@}
/*!
* @name Register LLWU_F3, field MWUF7[7] (RO)
*
* Indicates that an enabled internal peripheral was a source of exiting a
* low-leakage power mode. To clear the flag, follow the internal peripheral flag
* clearing mechanism.
*
* Values:
* - 0 - Module 7 input was not a wakeup source
* - 1 - Module 7 input was a wakeup source
*/
//@{
#define BP_LLWU_F3_MWUF7 (7U) //!< Bit position for LLWU_F3_MWUF7.
#define BM_LLWU_F3_MWUF7 (0x80U) //!< Bit mask for LLWU_F3_MWUF7.
#define BS_LLWU_F3_MWUF7 (1U) //!< Bit field size in bits for LLWU_F3_MWUF7.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_F3_MWUF7 field.
#define BR_LLWU_F3_MWUF7 (BITBAND_ACCESS8(HW_LLWU_F3_ADDR, BP_LLWU_F3_MWUF7))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_LLWU_FILT1 - LLWU Pin Filter 1 register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_LLWU_FILT1 - LLWU Pin Filter 1 register (RW)
*
* Reset value: 0x00U
*
* LLWU_FILT1 is a control and status register that is used to enable/disable
* the digital filter 1 features for an external pin. This register is reset on
* Chip Reset not VLLS and by reset types that trigger Chip Reset not VLLS. It is
* unaffected by reset types that do not trigger Chip Reset not VLLS. See the
* IntroductionInformation found here describes the registers of the Reset Control
* Module (RCM). The RCM implements many of the reset functions for the chip. See
* the chip's reset chapter for more information. details for more information.
*/
typedef union _hw_llwu_filt1
{
uint8_t U;
struct _hw_llwu_filt1_bitfields
{
uint8_t FILTSEL : 4; //!< [3:0] Filter Pin Select
uint8_t RESERVED0 : 1; //!< [4]
uint8_t FILTE : 2; //!< [6:5] Digital Filter On External Pin
uint8_t FILTF : 1; //!< [7] Filter Detect Flag
} B;
} hw_llwu_filt1_t;
#endif
/*!
* @name Constants and macros for entire LLWU_FILT1 register
*/
//@{
#define HW_LLWU_FILT1_ADDR (REGS_LLWU_BASE + 0x8U)
#ifndef __LANGUAGE_ASM__
#define HW_LLWU_FILT1 (*(__IO hw_llwu_filt1_t *) HW_LLWU_FILT1_ADDR)
#define HW_LLWU_FILT1_RD() (HW_LLWU_FILT1.U)
#define HW_LLWU_FILT1_WR(v) (HW_LLWU_FILT1.U = (v))
#define HW_LLWU_FILT1_SET(v) (HW_LLWU_FILT1_WR(HW_LLWU_FILT1_RD() | (v)))
#define HW_LLWU_FILT1_CLR(v) (HW_LLWU_FILT1_WR(HW_LLWU_FILT1_RD() & ~(v)))
#define HW_LLWU_FILT1_TOG(v) (HW_LLWU_FILT1_WR(HW_LLWU_FILT1_RD() ^ (v)))
#endif
//@}
/*
* Constants & macros for individual LLWU_FILT1 bitfields
*/
/*!
* @name Register LLWU_FILT1, field FILTSEL[3:0] (RW)
*
* Selects 1 out of the 16 wakeup pins to be muxed into the filter.
*
* Values:
* - 0000 - Select LLWU_P0 for filter
* - 1111 - Select LLWU_P15 for filter
*/
//@{
#define BP_LLWU_FILT1_FILTSEL (0U) //!< Bit position for LLWU_FILT1_FILTSEL.
#define BM_LLWU_FILT1_FILTSEL (0x0FU) //!< Bit mask for LLWU_FILT1_FILTSEL.
#define BS_LLWU_FILT1_FILTSEL (4U) //!< Bit field size in bits for LLWU_FILT1_FILTSEL.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_FILT1_FILTSEL field.
#define BR_LLWU_FILT1_FILTSEL (HW_LLWU_FILT1.B.FILTSEL)
#endif
//! @brief Format value for bitfield LLWU_FILT1_FILTSEL.
#define BF_LLWU_FILT1_FILTSEL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_FILT1_FILTSEL), uint8_t) & BM_LLWU_FILT1_FILTSEL)
#ifndef __LANGUAGE_ASM__
//! @brief Set the FILTSEL field to a new value.
#define BW_LLWU_FILT1_FILTSEL(v) (HW_LLWU_FILT1_WR((HW_LLWU_FILT1_RD() & ~BM_LLWU_FILT1_FILTSEL) | BF_LLWU_FILT1_FILTSEL(v)))
#endif
//@}
/*!
* @name Register LLWU_FILT1, field FILTE[6:5] (RW)
*
* Controls the digital filter options for the external pin detect.
*
* Values:
* - 00 - Filter disabled
* - 01 - Filter posedge detect enabled
* - 10 - Filter negedge detect enabled
* - 11 - Filter any edge detect enabled
*/
//@{
#define BP_LLWU_FILT1_FILTE (5U) //!< Bit position for LLWU_FILT1_FILTE.
#define BM_LLWU_FILT1_FILTE (0x60U) //!< Bit mask for LLWU_FILT1_FILTE.
#define BS_LLWU_FILT1_FILTE (2U) //!< Bit field size in bits for LLWU_FILT1_FILTE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_FILT1_FILTE field.
#define BR_LLWU_FILT1_FILTE (HW_LLWU_FILT1.B.FILTE)
#endif
//! @brief Format value for bitfield LLWU_FILT1_FILTE.
#define BF_LLWU_FILT1_FILTE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_FILT1_FILTE), uint8_t) & BM_LLWU_FILT1_FILTE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the FILTE field to a new value.
#define BW_LLWU_FILT1_FILTE(v) (HW_LLWU_FILT1_WR((HW_LLWU_FILT1_RD() & ~BM_LLWU_FILT1_FILTE) | BF_LLWU_FILT1_FILTE(v)))
#endif
//@}
/*!
* @name Register LLWU_FILT1, field FILTF[7] (W1C)
*
* Indicates that the filtered external wakeup pin, selected by FILTSEL, was a
* source of exiting a low-leakage power mode. To clear the flag write a one to
* FILTF.
*
* Values:
* - 0 - Pin Filter 1 was not a wakeup source
* - 1 - Pin Filter 1 was a wakeup source
*/
//@{
#define BP_LLWU_FILT1_FILTF (7U) //!< Bit position for LLWU_FILT1_FILTF.
#define BM_LLWU_FILT1_FILTF (0x80U) //!< Bit mask for LLWU_FILT1_FILTF.
#define BS_LLWU_FILT1_FILTF (1U) //!< Bit field size in bits for LLWU_FILT1_FILTF.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_FILT1_FILTF field.
#define BR_LLWU_FILT1_FILTF (BITBAND_ACCESS8(HW_LLWU_FILT1_ADDR, BP_LLWU_FILT1_FILTF))
#endif
//! @brief Format value for bitfield LLWU_FILT1_FILTF.
#define BF_LLWU_FILT1_FILTF(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_FILT1_FILTF), uint8_t) & BM_LLWU_FILT1_FILTF)
#ifndef __LANGUAGE_ASM__
//! @brief Set the FILTF field to a new value.
#define BW_LLWU_FILT1_FILTF(v) (BITBAND_ACCESS8(HW_LLWU_FILT1_ADDR, BP_LLWU_FILT1_FILTF) = (v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_LLWU_FILT2 - LLWU Pin Filter 2 register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_LLWU_FILT2 - LLWU Pin Filter 2 register (RW)
*
* Reset value: 0x00U
*
* LLWU_FILT2 is a control and status register that is used to enable/disable
* the digital filter 2 features for an external pin. This register is reset on
* Chip Reset not VLLS and by reset types that trigger Chip Reset not VLLS. It is
* unaffected by reset types that do not trigger Chip Reset not VLLS. See the
* IntroductionInformation found here describes the registers of the Reset Control
* Module (RCM). The RCM implements many of the reset functions for the chip. See
* the chip's reset chapter for more information. details for more information.
*/
typedef union _hw_llwu_filt2
{
uint8_t U;
struct _hw_llwu_filt2_bitfields
{
uint8_t FILTSEL : 4; //!< [3:0] Filter Pin Select
uint8_t RESERVED0 : 1; //!< [4]
uint8_t FILTE : 2; //!< [6:5] Digital Filter On External Pin
uint8_t FILTF : 1; //!< [7] Filter Detect Flag
} B;
} hw_llwu_filt2_t;
#endif
/*!
* @name Constants and macros for entire LLWU_FILT2 register
*/
//@{
#define HW_LLWU_FILT2_ADDR (REGS_LLWU_BASE + 0x9U)
#ifndef __LANGUAGE_ASM__
#define HW_LLWU_FILT2 (*(__IO hw_llwu_filt2_t *) HW_LLWU_FILT2_ADDR)
#define HW_LLWU_FILT2_RD() (HW_LLWU_FILT2.U)
#define HW_LLWU_FILT2_WR(v) (HW_LLWU_FILT2.U = (v))
#define HW_LLWU_FILT2_SET(v) (HW_LLWU_FILT2_WR(HW_LLWU_FILT2_RD() | (v)))
#define HW_LLWU_FILT2_CLR(v) (HW_LLWU_FILT2_WR(HW_LLWU_FILT2_RD() & ~(v)))
#define HW_LLWU_FILT2_TOG(v) (HW_LLWU_FILT2_WR(HW_LLWU_FILT2_RD() ^ (v)))
#endif
//@}
/*
* Constants & macros for individual LLWU_FILT2 bitfields
*/
/*!
* @name Register LLWU_FILT2, field FILTSEL[3:0] (RW)
*
* Selects 1 out of the 16 wakeup pins to be muxed into the filter.
*
* Values:
* - 0000 - Select LLWU_P0 for filter
* - 1111 - Select LLWU_P15 for filter
*/
//@{
#define BP_LLWU_FILT2_FILTSEL (0U) //!< Bit position for LLWU_FILT2_FILTSEL.
#define BM_LLWU_FILT2_FILTSEL (0x0FU) //!< Bit mask for LLWU_FILT2_FILTSEL.
#define BS_LLWU_FILT2_FILTSEL (4U) //!< Bit field size in bits for LLWU_FILT2_FILTSEL.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_FILT2_FILTSEL field.
#define BR_LLWU_FILT2_FILTSEL (HW_LLWU_FILT2.B.FILTSEL)
#endif
//! @brief Format value for bitfield LLWU_FILT2_FILTSEL.
#define BF_LLWU_FILT2_FILTSEL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_FILT2_FILTSEL), uint8_t) & BM_LLWU_FILT2_FILTSEL)
#ifndef __LANGUAGE_ASM__
//! @brief Set the FILTSEL field to a new value.
#define BW_LLWU_FILT2_FILTSEL(v) (HW_LLWU_FILT2_WR((HW_LLWU_FILT2_RD() & ~BM_LLWU_FILT2_FILTSEL) | BF_LLWU_FILT2_FILTSEL(v)))
#endif
//@}
/*!
* @name Register LLWU_FILT2, field FILTE[6:5] (RW)
*
* Controls the digital filter options for the external pin detect.
*
* Values:
* - 00 - Filter disabled
* - 01 - Filter posedge detect enabled
* - 10 - Filter negedge detect enabled
* - 11 - Filter any edge detect enabled
*/
//@{
#define BP_LLWU_FILT2_FILTE (5U) //!< Bit position for LLWU_FILT2_FILTE.
#define BM_LLWU_FILT2_FILTE (0x60U) //!< Bit mask for LLWU_FILT2_FILTE.
#define BS_LLWU_FILT2_FILTE (2U) //!< Bit field size in bits for LLWU_FILT2_FILTE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_FILT2_FILTE field.
#define BR_LLWU_FILT2_FILTE (HW_LLWU_FILT2.B.FILTE)
#endif
//! @brief Format value for bitfield LLWU_FILT2_FILTE.
#define BF_LLWU_FILT2_FILTE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_FILT2_FILTE), uint8_t) & BM_LLWU_FILT2_FILTE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the FILTE field to a new value.
#define BW_LLWU_FILT2_FILTE(v) (HW_LLWU_FILT2_WR((HW_LLWU_FILT2_RD() & ~BM_LLWU_FILT2_FILTE) | BF_LLWU_FILT2_FILTE(v)))
#endif
//@}
/*!
* @name Register LLWU_FILT2, field FILTF[7] (W1C)
*
* Indicates that the filtered external wakeup pin, selected by FILTSEL, was a
* source of exiting a low-leakage power mode. To clear the flag write a one to
* FILTF.
*
* Values:
* - 0 - Pin Filter 2 was not a wakeup source
* - 1 - Pin Filter 2 was a wakeup source
*/
//@{
#define BP_LLWU_FILT2_FILTF (7U) //!< Bit position for LLWU_FILT2_FILTF.
#define BM_LLWU_FILT2_FILTF (0x80U) //!< Bit mask for LLWU_FILT2_FILTF.
#define BS_LLWU_FILT2_FILTF (1U) //!< Bit field size in bits for LLWU_FILT2_FILTF.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_FILT2_FILTF field.
#define BR_LLWU_FILT2_FILTF (BITBAND_ACCESS8(HW_LLWU_FILT2_ADDR, BP_LLWU_FILT2_FILTF))
#endif
//! @brief Format value for bitfield LLWU_FILT2_FILTF.
#define BF_LLWU_FILT2_FILTF(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_FILT2_FILTF), uint8_t) & BM_LLWU_FILT2_FILTF)
#ifndef __LANGUAGE_ASM__
//! @brief Set the FILTF field to a new value.
#define BW_LLWU_FILT2_FILTF(v) (BITBAND_ACCESS8(HW_LLWU_FILT2_ADDR, BP_LLWU_FILT2_FILTF) = (v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_LLWU_RST - LLWU Reset Enable register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_LLWU_RST - LLWU Reset Enable register (RW)
*
* Reset value: 0x02U
*
* LLWU_RST is a control register that is used to enable/disable the digital
* filter for the external pin detect and RESET pin. This register is reset on Chip
* Reset not VLLS and by reset types that trigger Chip Reset not VLLS. It is
* unaffected by reset types that do not trigger Chip Reset not VLLS. See the
* IntroductionInformation found here describes the registers of the Reset Control
* Module (RCM). The RCM implements many of the reset functions for the chip. See the
* chip's reset chapter for more information. details for more information.
*/
typedef union _hw_llwu_rst
{
uint8_t U;
struct _hw_llwu_rst_bitfields
{
uint8_t RSTFILT : 1; //!< [0] Digital Filter On RESET Pin
uint8_t LLRSTE : 1; //!< [1] Low-Leakage Mode RESET Enable
uint8_t RESERVED0 : 6; //!< [7:2]
} B;
} hw_llwu_rst_t;
#endif
/*!
* @name Constants and macros for entire LLWU_RST register
*/
//@{
#define HW_LLWU_RST_ADDR (REGS_LLWU_BASE + 0xAU)
#ifndef __LANGUAGE_ASM__
#define HW_LLWU_RST (*(__IO hw_llwu_rst_t *) HW_LLWU_RST_ADDR)
#define HW_LLWU_RST_RD() (HW_LLWU_RST.U)
#define HW_LLWU_RST_WR(v) (HW_LLWU_RST.U = (v))
#define HW_LLWU_RST_SET(v) (HW_LLWU_RST_WR(HW_LLWU_RST_RD() | (v)))
#define HW_LLWU_RST_CLR(v) (HW_LLWU_RST_WR(HW_LLWU_RST_RD() & ~(v)))
#define HW_LLWU_RST_TOG(v) (HW_LLWU_RST_WR(HW_LLWU_RST_RD() ^ (v)))
#endif
//@}
/*
* Constants & macros for individual LLWU_RST bitfields
*/
/*!
* @name Register LLWU_RST, field RSTFILT[0] (RW)
*
* Enables the digital filter for the RESET pin during LLS, VLLS3, VLLS2, or
* VLLS1 modes.
*
* Values:
* - 0 - Filter not enabled
* - 1 - Filter enabled
*/
//@{
#define BP_LLWU_RST_RSTFILT (0U) //!< Bit position for LLWU_RST_RSTFILT.
#define BM_LLWU_RST_RSTFILT (0x01U) //!< Bit mask for LLWU_RST_RSTFILT.
#define BS_LLWU_RST_RSTFILT (1U) //!< Bit field size in bits for LLWU_RST_RSTFILT.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_RST_RSTFILT field.
#define BR_LLWU_RST_RSTFILT (BITBAND_ACCESS8(HW_LLWU_RST_ADDR, BP_LLWU_RST_RSTFILT))
#endif
//! @brief Format value for bitfield LLWU_RST_RSTFILT.
#define BF_LLWU_RST_RSTFILT(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_RST_RSTFILT), uint8_t) & BM_LLWU_RST_RSTFILT)
#ifndef __LANGUAGE_ASM__
//! @brief Set the RSTFILT field to a new value.
#define BW_LLWU_RST_RSTFILT(v) (BITBAND_ACCESS8(HW_LLWU_RST_ADDR, BP_LLWU_RST_RSTFILT) = (v))
#endif
//@}
/*!
* @name Register LLWU_RST, field LLRSTE[1] (RW)
*
* This bit must be set to allow the device to be reset while in a low-leakage
* power mode. On devices where Reset is not a dedicated pin, the RESET pin must
* also be enabled in the explicit port mux control.
*
* Values:
* - 0 - RESET pin not enabled as a leakage mode exit source
* - 1 - RESET pin enabled as a low leakage mode exit source
*/
//@{
#define BP_LLWU_RST_LLRSTE (1U) //!< Bit position for LLWU_RST_LLRSTE.
#define BM_LLWU_RST_LLRSTE (0x02U) //!< Bit mask for LLWU_RST_LLRSTE.
#define BS_LLWU_RST_LLRSTE (1U) //!< Bit field size in bits for LLWU_RST_LLRSTE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the LLWU_RST_LLRSTE field.
#define BR_LLWU_RST_LLRSTE (BITBAND_ACCESS8(HW_LLWU_RST_ADDR, BP_LLWU_RST_LLRSTE))
#endif
//! @brief Format value for bitfield LLWU_RST_LLRSTE.
#define BF_LLWU_RST_LLRSTE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_LLWU_RST_LLRSTE), uint8_t) & BM_LLWU_RST_LLRSTE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the LLRSTE field to a new value.
#define BW_LLWU_RST_LLRSTE(v) (BITBAND_ACCESS8(HW_LLWU_RST_ADDR, BP_LLWU_RST_LLRSTE) = (v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// hw_llwu_t - module struct
//-------------------------------------------------------------------------------------------
/*!
* @brief All LLWU module registers.
*/
#ifndef __LANGUAGE_ASM__
#pragma pack(1)
typedef struct _hw_llwu
{
__IO hw_llwu_pe1_t PE1; //!< [0x0] LLWU Pin Enable 1 register
__IO hw_llwu_pe2_t PE2; //!< [0x1] LLWU Pin Enable 2 register
__IO hw_llwu_pe3_t PE3; //!< [0x2] LLWU Pin Enable 3 register
__IO hw_llwu_pe4_t PE4; //!< [0x3] LLWU Pin Enable 4 register
__IO hw_llwu_me_t ME; //!< [0x4] LLWU Module Enable register
__IO hw_llwu_f1_t F1; //!< [0x5] LLWU Flag 1 register
__IO hw_llwu_f2_t F2; //!< [0x6] LLWU Flag 2 register
__I hw_llwu_f3_t F3; //!< [0x7] LLWU Flag 3 register
__IO hw_llwu_filt1_t FILT1; //!< [0x8] LLWU Pin Filter 1 register
__IO hw_llwu_filt2_t FILT2; //!< [0x9] LLWU Pin Filter 2 register
__IO hw_llwu_rst_t RST; //!< [0xA] LLWU Reset Enable register
} hw_llwu_t;
#pragma pack()
//! @brief Macro to access all LLWU registers.
//! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct,
//! use the '&' operator, like <code>&HW_LLWU</code>.
#define HW_LLWU (*(hw_llwu_t *) REGS_LLWU_BASE)
#endif
#endif // __HW_LLWU_REGISTERS_H__
// v22/130726/0.9
// EOF
View Git Blame Copy Permalink