243 lines
7.8 KiB
C
243 lines
7.8 KiB
C
/**************************************************************************//**
|
|
* @file scuart.c
|
|
* @brief NUC980 series Smartcard UART mode (SCUART) driver source file
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
* @copyright (C) 2018 Nuvoton Technology Corp. All rights reserved.
|
|
*****************************************************************************/
|
|
#include "nu_scuart.h"
|
|
|
|
/** @addtogroup Standard_Driver Standard Driver
|
|
@{
|
|
*/
|
|
|
|
/** @addtogroup SCUART_Driver SCUART Driver
|
|
@{
|
|
*/
|
|
|
|
|
|
/** @addtogroup SCUART_EXPORTED_FUNCTIONS SCUART Exported Functions
|
|
@{
|
|
*/
|
|
|
|
/**
|
|
* @brief Disable smartcard uart interface.
|
|
* @param sc Smartcard module number
|
|
* @return None
|
|
* @details The function is used to disable smartcard interface UART mode.
|
|
*/
|
|
void SCUART_Close(UINT sc)
|
|
{
|
|
if (sc == 0)
|
|
{
|
|
outpw(REG_SC0_INTEN, 0);
|
|
outpw(REG_SC0_UARTCTL, 0);
|
|
outpw(REG_SC0_CTL, 0);
|
|
}
|
|
else
|
|
{
|
|
outpw(REG_SC1_INTEN, 0);
|
|
outpw(REG_SC1_UARTCTL, 0);
|
|
outpw(REG_SC1_CTL, 0);
|
|
}
|
|
}
|
|
|
|
/// @cond HIDDEN_SYMBOLS
|
|
/**
|
|
* @brief This function returns module clock of specified SC interface
|
|
* @param[in] sc Smartcard module number
|
|
* @return Module clock of specified SC interface
|
|
*/
|
|
static uint32_t SCUART_GetClock(UINT sc)
|
|
{
|
|
uint32_t u32Div;
|
|
|
|
if (sc == 0)
|
|
u32Div = ((inpw(REG_CLK_DIVCTL6) >> 24) & 0xF) + 1;
|
|
else
|
|
u32Div = ((inpw(REG_CLK_DIVCTL6) >> 28) & 0xF) + 1;
|
|
|
|
return 12000000 / u32Div;
|
|
}
|
|
/// @endcond HIDDEN_SYMBOLS
|
|
|
|
/**
|
|
* @brief Enable smartcard uart interface.
|
|
* @param[in] sc Smartcard module number
|
|
* @param[in] u32baudrate Target baudrate of smartcard module.
|
|
* @return Actual baudrate of smartcard mode.
|
|
* @details This function use to enable smartcard module UART mode and set baudrate.
|
|
* @note This function configures character width to 8 bits, 1 stop bit, and no parity.
|
|
* And can use \ref SCUART_SetLineConfig function to update these settings.
|
|
*/
|
|
UINT SCUART_Open(UINT sc, UINT u32baudrate)
|
|
{
|
|
uint32_t u32Clk = SCUART_GetClock(sc), u32Div;
|
|
|
|
// Calculate divider for target baudrate
|
|
u32Div = (u32Clk + (u32baudrate >> 1) - 1) / u32baudrate - 1;
|
|
|
|
if (sc == 0)
|
|
{
|
|
outpw(REG_SC0_CTL, SC_CTL_SCEN_Msk | SC_CTL_NSB_Msk); // Enable smartcard interface and stop bit = 1
|
|
outpw(REG_SC0_UARTCTL, SCUART_CHAR_LEN_8 | SCUART_PARITY_NONE | SC_UARTCTL_UARTEN_Msk); // Enable UART mode, disable parity and 8 bit per character
|
|
outpw(REG_SC0_ETUCTL, u32Div);
|
|
}
|
|
else
|
|
{
|
|
outpw(REG_SC1_CTL, SC_CTL_SCEN_Msk | SC_CTL_NSB_Msk); // Enable smartcard interface and stop bit = 1
|
|
outpw(REG_SC1_UARTCTL, SCUART_CHAR_LEN_8 | SCUART_PARITY_NONE | SC_UARTCTL_UARTEN_Msk); // Enable UART mode, disable parity and 8 bit per character
|
|
outpw(REG_SC1_ETUCTL, u32Div);
|
|
}
|
|
|
|
return (u32Clk / (u32Div + 1));
|
|
}
|
|
|
|
/**
|
|
* @brief Read data from smartcard UART interface.
|
|
* @param[in] sc Smartcard module number
|
|
* @param[in] pu8RxBuf The buffer to store receive the data.
|
|
* @param[in] u32ReadBytes Target number of characters to receive.
|
|
* @return Actual character number reads to buffer.
|
|
* @details The function is used to read Rx data from RX FIFO.
|
|
* @note This function does not block and return immediately if there's no data available.
|
|
*/
|
|
UINT SCUART_Read(UINT sc, char *pu8RxBuf, UINT u32ReadBytes)
|
|
{
|
|
uint32_t u32Count;
|
|
|
|
if (sc == 0)
|
|
{
|
|
for (u32Count = 0; u32Count < u32ReadBytes; u32Count++)
|
|
{
|
|
if (inpw(REG_SC0_STATUS) & SC_STATUS_RXEMPTY_Msk) // no data available
|
|
{
|
|
break;
|
|
}
|
|
pu8RxBuf[u32Count] = inpw(REG_SC0_DAT); // get data from FIFO
|
|
}
|
|
}
|
|
else
|
|
{
|
|
for (u32Count = 0; u32Count < u32ReadBytes; u32Count++)
|
|
{
|
|
if (inpw(REG_SC1_STATUS) & SC_STATUS_RXEMPTY_Msk) // no data available
|
|
{
|
|
break;
|
|
}
|
|
pu8RxBuf[u32Count] = inpw(REG_SC1_DAT); // get data from FIFO
|
|
}
|
|
|
|
}
|
|
|
|
return u32Count;
|
|
}
|
|
|
|
/**
|
|
* @brief This function use to config smartcard UART mode line setting.
|
|
* @param[in] sc Smartcard module number
|
|
* @param[in] u32Baudrate Target baudrate of smartcard module. If this value is 0, UART baudrate will not change.
|
|
* @param[in] u32DataWidth The data length, could be:
|
|
* - \ref SCUART_CHAR_LEN_5
|
|
* - \ref SCUART_CHAR_LEN_6
|
|
* - \ref SCUART_CHAR_LEN_7
|
|
* - \ref SCUART_CHAR_LEN_8
|
|
* @param[in] u32Parity The parity setting, could be:
|
|
* - \ref SCUART_PARITY_NONE
|
|
* - \ref SCUART_PARITY_ODD
|
|
* - \ref SCUART_PARITY_EVEN
|
|
* @param[in] u32StopBits The stop bit length, could be:
|
|
* - \ref SCUART_STOP_BIT_1
|
|
* - \ref SCUART_STOP_BIT_2
|
|
* @return Actual baudrate of smartcard.
|
|
* @details Smartcard UART mode is operated in LIN data frame.
|
|
*/
|
|
UINT SCUART_SetLineConfig(UINT sc, UINT u32Baudrate, UINT u32DataWidth, UINT u32Parity, UINT u32StopBits)
|
|
{
|
|
|
|
uint32_t u32Clk = SCUART_GetClock(sc), u32Div;
|
|
|
|
if (u32Baudrate == 0) // keep original baudrate setting
|
|
{
|
|
u32Div = (sc == 0) ? inpw(REG_SC0_ETUCTL) & 0xFFF : inpw(REG_SC1_ETUCTL) & 0xFFF;
|
|
}
|
|
else
|
|
{
|
|
// Calculate divider for target baudrate
|
|
u32Div = (u32Clk + (u32Baudrate >> 1) - 1) / u32Baudrate - 1;
|
|
if (sc == 0)
|
|
outpw(REG_SC0_ETUCTL, u32Div);
|
|
else
|
|
outpw(REG_SC1_ETUCTL, u32Div);
|
|
}
|
|
|
|
if (sc == 0)
|
|
{
|
|
outpw(REG_SC0_CTL, u32StopBits | SC_CTL_SCEN_Msk); // Set stop bit
|
|
outpw(REG_SC0_UARTCTL, u32Parity | u32DataWidth | SC_UARTCTL_UARTEN_Msk); // Set character width and parity
|
|
}
|
|
else
|
|
{
|
|
outpw(REG_SC1_CTL, u32StopBits | SC_CTL_SCEN_Msk); // Set stop bit
|
|
outpw(REG_SC1_UARTCTL, u32Parity | u32DataWidth | SC_UARTCTL_UARTEN_Msk); // Set character width and parity
|
|
}
|
|
return (u32Clk / (u32Div + 1));
|
|
}
|
|
|
|
/**
|
|
* @brief This function use to set receive timeout count.
|
|
* @param[in] sc Smartcard module number
|
|
* @param[in] u32TOC Rx timeout counter, using baudrate as counter unit. Valid range are 0~0x1FF,
|
|
* set this value to 0 will disable timeout counter.
|
|
* @return None
|
|
* @details The time-out counter resets and starts counting whenever the RX buffer received a
|
|
* new data word. Once the counter decrease to 1 and no new data is received or CPU
|
|
* does not read any data from FIFO, a receiver time-out interrupt will be generated.
|
|
*/
|
|
void SCUART_SetTimeoutCnt(UINT sc, UINT u32TOC)
|
|
{
|
|
if (sc == 0)
|
|
outpw(REG_SC0_RXTOUT, u32TOC);
|
|
else
|
|
outpw(REG_SC1_RXTOUT, u32TOC);
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief Write data to smartcard UART interface.
|
|
* @param[in] sc Smartcard module number
|
|
* @param[in] pu8TxBuf The buffer containing data to send to transmit FIFO.
|
|
* @param[in] u32WriteBytes Number of data to send.
|
|
* @return None
|
|
* @details This function is to write data into transmit FIFO to send data out.
|
|
* @note This function blocks until all data write into FIFO.
|
|
*/
|
|
void SCUART_Write(UINT sc, char *pu8TxBuf, UINT u32WriteBytes)
|
|
{
|
|
uint32_t u32Count;
|
|
|
|
if (sc == 0)
|
|
{
|
|
for (u32Count = 0; u32Count != u32WriteBytes; u32Count++)
|
|
{
|
|
while (inpw(REG_SC0_STATUS) & SC_STATUS_TXFULL_Msk); // Wait 'til FIFO not full
|
|
outpw(REG_SC0_DAT, pu8TxBuf[u32Count]); // Write 1 byte to FIFO
|
|
}
|
|
}
|
|
else
|
|
{
|
|
for (u32Count = 0; u32Count != u32WriteBytes; u32Count++)
|
|
{
|
|
while (inpw(REG_SC0_STATUS) & SC_STATUS_TXFULL_Msk); // Wait 'til FIFO not full
|
|
outpw(REG_SC1_DAT, pu8TxBuf[u32Count]); // Write 1 byte to FIFO
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/*@}*/ /* end of group SCUART_EXPORTED_FUNCTIONS */
|
|
|
|
/*@}*/ /* end of group SCUART_Driver */
|
|
|
|
/*@}*/ /* end of group Standard_Driver */
|