wdfk-prog 431579a166

[stm32][adc]更改配置通道与校准函数顺序 (#6758) ...

* [stm32][adc]更改配置通道与校准函数顺序
* 添加16位与14位分辨率配置
* 添加内部参考电压与温度,电池电压通道配置

* [stm32][adc]修改返回参考电压函数
* 返回准确的参考电压值
* 通过该值在使用__HAL_ADC_CALC_DATA_TO_VOLTAGE宏计算的电压值更为准确

* 删除多余代码

* 规划代码格式

* 更新支持其余芯片
* 已测试F429

2023-01-02 01:47:58 -05:00

..

CMSIS/Include

[stm32] move CMSIS hearder files to common folder (#5998)

2022-06-04 17:05:37 +08:00

config

[RTduino][STM32]为stm32l431-BearPi开发板对接RTduino软件包 (#6688)

2022-12-04 20:28:15 -05:00

drv_flash

[bsp/stm32] upgrade to rt-thread 5.0

2022-10-20 11:44:34 +08:00

drv_adc.c

[stm32][adc]更改配置通道与校准函数顺序 (#6758)

2023-01-02 01:47:58 -05:00

drv_can.c

[CAN]update struct can_filter_item and rt_can_msg (#6556)

2022-11-21 21:45:51 -05:00

drv_can.h

[stm32][driver] auto formatted

2021-03-08 22:40:39 +08:00

drv_common.c

[STM32][common]更新rt_hw_us_delay函数,以支持设置更高延时

2022-12-22 21:18:29 -05:00

drv_common.h

Merge branch 'fudfe' into gitee_master

2021-04-08 21:19:30 +08:00

drv_config.h

[update] add stm32u575-st-nucleo bsp.

2021-11-15 11:23:12 +08:00

drv_crypto.c

[bsp][stm32][drv_crypto] Enable RNG Clock

2022-05-09 11:13:01 +08:00

drv_crypto.h

[drivers][crypto]add device CRC/RNG

2019-07-18 10:26:31 +08:00

drv_dac.c

[stm32][dac] add comment

2022-05-25 10:04:33 +08:00

drv_dma.h

[update] ignore_format.yml

2021-11-15 15:31:51 +08:00

drv_eth.c

[phy] fix the PHY_FULL_DUPLEX conflicts

2022-08-03 22:45:27 -04:00

drv_eth.h

Merge pull request #4910 from Ouxiaolong/master

2021-08-17 12:54:03 +08:00

drv_gpio.c

将驱动文件中判断RT_USING_XXX改为BSP_USING_XXX,解决了部分框架层与驱动层的混用

2022-10-27 18:30:08 -04:00

drv_gpio.h

[stm32][driver] auto formatted

2021-03-08 22:40:39 +08:00

drv_lcd_mipi.c

[rtdef] use lower-case to define attributes (#6728)

2022-12-11 13:12:03 -05:00

drv_lcd.c

[qmeu] chore

2022-01-16 18:54:24 +08:00

drv_log.h

[stm32][driver] auto formatted

2021-03-08 22:40:39 +08:00

drv_lptim.c

[stm32][driver] auto formatted

2021-03-08 22:40:39 +08:00

drv_lptim.h

[stm32][driver] auto formatted

2021-03-08 22:40:39 +08:00

drv_nand.c

[stm32f103-fire-arbitrary] support nandflash K9F1G08U0E && LPM init && partition create && partition read/write

2022-10-20 00:28:52 -04:00

drv_nand.h

[stm32f103-fire-arbitrary] support nandflash K9F1G08U0E && LPM init && partition create && partition read/write

2022-10-20 00:28:52 -04:00

drv_pm.c

[stm32][driver] auto formatted

2021-03-08 22:40:39 +08:00

drv_pulse_encoder.c

FIX: [bsp][stm32] pulse_encoder driver did not handle TIM overflow

2022-10-08 22:32:45 -04:00

drv_pwm.c

添加判断当前使用定时器是否可配置为主从定时器模式

2022-12-06 00:07:57 -05:00

drv_qspi.c

[stm32][driver] auto formatted

2021-03-08 22:40:39 +08:00

drv_qspi.h

[stm32][driver] auto formatted

2021-03-08 22:40:39 +08:00

drv_rtc.c

[stm32f1] 对于RTC-Alarm进行添加STM32F1宏控制 (#6765)

2022-12-21 20:33:54 -05:00

drv_sdio.c

[rtdef] use lower-case to define attributes (#6728)

2022-12-11 13:12:03 -05:00

drv_sdio.h

[stm32][driver] auto formatted

2021-03-08 22:40:39 +08:00

drv_sdram.c

完善ART-PI BSP

2021-09-27 17:42:30 +08:00

drv_soft_i2c.c

Fix some compilation warning (#5744)

2022-08-02 12:09:49 -04:00

drv_soft_i2c.h

[stm32][driver] auto formatted

2021-03-08 22:40:39 +08:00

drv_soft_spi.c

[stm32][soft spi] implement soft spi (#6078)

2022-06-16 10:54:30 +08:00

drv_soft_spi.h

[stm32][soft spi] implement soft spi (#6078)

2022-06-16 10:54:30 +08:00

drv_spi.c

[stm32][spic]修改SPI TX DMA中断优先级

2022-12-24 15:12:30 -05:00

drv_spi.h

[bsp/stm32] 将spi DMA传输更改为阻塞线程方式 (#6513)

2022-10-17 15:52:03 -04:00

drv_tim.c

[bug] fix tim bug

2022-12-09 23:19:18 -05:00

drv_tim.h

[stm32][tim/pwm] 抽出公共代码，防止日后演进出现分歧 (#6575)

2022-11-06 22:58:39 -05:00

drv_usart_v2.c

修改串口V2的putc顺序

2022-12-06 10:37:35 +08:00

drv_usart_v2.h

修复STM32串口mask问题

2021-10-14 10:15:55 +08:00

drv_usart.c

Update drv_usart.c

2022-10-22 15:11:46 -04:00

drv_usart.h

[stm32][tim/pwm] 抽出公共代码，防止日后演进出现分歧 (#6575)

2022-11-06 22:58:39 -05:00

drv_usbd.c

Modified bsp/stm32/libraries/HAL_Drivers/drv_usbd.c

2022-11-14 23:47:49 -05:00

drv_usbh.c

修改bsp的usb host 驅動 (#4379)

2022-01-26 10:46:57 +08:00

drv_usbh.h

[stm32][driver] auto formatted

2021-03-08 22:40:39 +08:00

drv_wdt.c

[bsp/stm32/libraries/HAL_Drivers/drv_wdt.c]: add SOC_SERIES_STM32G0 to use "stm32_wdt.hiwdg.Init.Window = 0x00000FFF", otherwise the watchdog always reset.

2021-11-02 14:37:42 +08:00

Kconfig

[add] crc, rng, hash and cryp driver for smt32mp1.

2020-11-26 14:31:08 +08:00

SConscript

[stm32][tim/pwm] 抽出公共代码，防止日后演进出现分歧 (#6575)

2022-11-06 22:58:39 -05:00