rt-thread-official/bsp/stm32/stm32f401-weact-blackpill/applications/arduino_pinout/pins_arduino.c

59 lines
2.1 KiB
C

/*
* Copyright (c) 2006-2023, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2023-03-25 Chushicheng first version
*/
#include <Arduino.h>
#include "pins_arduino.h"
#include <drv_gpio.h>
/*
* {Arduino Pin, RT-Thread Pin [, Device Name, Channel]}
* [] means optional
* Digital pins must NOT give the device name and channel.
* Analog pins MUST give the device name and channel(ADC, PWM or DAC).
* Arduino Pin must keep in sequence.
*/
const pin_map_t pin_map_table[]=
{
{D0, GET_PIN(C,13)}, /* LED_BUILTIN */
{D1, GET_PIN(C,14), "i2c1"}, /* I2C-SDA (Wire) */
{D2, GET_PIN(C,15), "i2c1"}, /* I2C-SCL (Wire) */
{D3, GET_PIN(A,2), "uart2"}, /* Serial2-TX */
{D4, GET_PIN(A,3), "uart2"}, /* Serial2-RX */
{D5, GET_PIN(B,2)},
{D6, GET_PIN(B,10)},
{D7, GET_PIN(B,9), "pwm4", 4}, /* PWM */
{D8, GET_PIN(B,8), "pwm4", 3}, /* PWM */
{D9, GET_PIN(B,7), "pwm4", 2}, /* PWM */
{D10, GET_PIN(B,6), "pwm4", 1}, /* PWM */
{D11, GET_PIN(B,5)},
{D12, GET_PIN(B,4)},
{D13, GET_PIN(B,3)},
{D14, GET_PIN(A,15)},
{D15, GET_PIN(A,12)},
{D16, GET_PIN(A,11)},
{D17, GET_PIN(A,10), "uart1"}, /* Serial-RX */
{D18, GET_PIN(A,9), "uart1"}, /* Serial-TX */
{D19, GET_PIN(A,8)},
{D20, GET_PIN(B,15), "pwm1", 3}, /* PWM */
{D21, GET_PIN(B,14), "pwm1", 2}, /* PWM */
{D22, GET_PIN(B,13), "pwm1", 1}, /* PWM */
{D23, GET_PIN(B,12)},
{A0, GET_PIN(A,0), "adc1", 0}, /* ADC */
{A1, GET_PIN(A,1), "adc1", 1}, /* ADC */
{A2, GET_PIN(A,4), "adc1", 4}, /* ADC */
{A3, GET_PIN(A,5), "adc1", 5}, /* ADC */
{A4, GET_PIN(A,6), "adc1", 6}, /* ADC */
{A5, GET_PIN(A,7), "adc1", 7}, /* ADC */
{A6, GET_PIN(B,0), "adc1", 8}, /* ADC */
{A7, GET_PIN(B,1), "adc1", 9}, /* ADC */
{A8, RT_NULL, "adc1", RT_ADC_INTERN_CH_VREF}, /* ADC, On-Chip: internal reference voltage */
{A9, RT_NULL, "adc1", RT_ADC_INTERN_CH_TEMPER}, /* ADC, On-Chip: internal temperature sensor */
};