rt-thread-official/bsp/bluetrum/libraries/hal_drivers/drv_sdio.h

141 lines
5.4 KiB
C

/*
* Copyright (c) 2020-2021, Bluetrum Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2020-11-30 greedyhao first version
*/
#ifndef DEV_SDIO_H__
#define DEV_SDIO_H__
#include "drv_common.h"
#include "board.h"
#include "drivers/mmcsd_core.h"
#include "drivers/sdio.h"
#define SDIO_BUFF_SIZE 1024
#define SDIO_ALIGN_LEN 32
#ifndef SDIO_MAX_FREQ
#define SDIO_MAX_FREQ (1000000)
#endif
#ifndef SDIO_BASE_ADDRESS
#define SDIO_BASE_ADDRESS (0x40012800U)
#endif
#ifndef SDIO_CLOCK_FREQ
#define SDIO_CLOCK_FREQ (48U * 1000 * 1000)
#endif
#ifndef SDIO_BUFF_SIZE
#define SDIO_BUFF_SIZE (4096)
#endif
#ifndef SDIO_ALIGN_LEN
#define SDIO_ALIGN_LEN (32)
#endif
#ifndef SDIO_MAX_FREQ
#define SDIO_MAX_FREQ (24 * 1000 * 1000)
#endif
#define HW_SDIO_CON_
#define HW_SDIO_CON_CFLAG (0x01u << 12) /*!< 0:send command or received response not finish \
1:send command or received response finish */
#define HW_SDIO_CON_DFLAG (0x01u << 13) /*!< 0:send or received data not finish \
1:send or received data finish */
#define HW_SDIO_CON_CCRCE (0x01u << 14) /*!< 0:command crc no error \
1:command crc error detected */
#define HW_SDIO_CON_NRPS (0x01u << 15) /*!< 0:response received 1:no response received */
#define HW_SDIO_CON_DCRCE (0x01u << 16) /*!< 0:read data crc no error \
1:read data crc error detected */
#define HW_SDIO_CON_CRCS (0x07u << 17) /*!< 101:error transmission \
010:non-erroneous transmission \
111:flash error */
#define HW_SDIO_CON_BUSY (0x01u << 20) /*!< 0:device busy 1:device not busy */
#define HW_SDIO_ERRORS \
(0)
#define HW_SDIO_POWER_OFF (0x00U)
#define HW_SDIO_POWER_UP (0x02U)
#define HW_SDIO_POWER_ON (0x03U)
#define HW_SDIO_FLOW_ENABLE (0x01U << 14)
#define HW_SDIO_BUSWIDE_1B (0x00U << 11)
#define HW_SDIO_BUSWIDE_4B (0x01U << 11)
#define HW_SDIO_BUSWIDE_8B (0x02U << 11)
#define HW_SDIO_BYPASS_ENABLE (0x01U << 10)
#define HW_SDIO_IDLE_ENABLE (0x01U << 9)
#define HW_SDIO_CLK_ENABLE (0x01U << 8)
#define HW_SDIO_SUSPEND_CMD (0x01U << 11)
#define HW_SDIO_CPSM_ENABLE (0x01U << 10)
#define HW_SDIO_WAIT_END (0x01U << 9)
#define HW_SDIO_WAIT_INT (0x01U << 8)
#define HW_SDIO_RESPONSE_NO (0x00U << 6)
#define HW_SDIO_RESPONSE_SHORT (0x01U << 6)
#define HW_SDIO_RESPONSE_LONG (0x03U << 6)
#define HW_SDIO_DATA_LEN_MASK (0x01FFFFFFU)
#define HW_SDIO_IO_ENABLE (0x01U << 11)
#define HW_SDIO_RWMOD_CK (0x01U << 10)
#define HW_SDIO_RWSTOP_ENABLE (0x01U << 9)
#define HW_SDIO_RWSTART_ENABLE (0x01U << 8)
#define HW_SDIO_DBLOCKSIZE_1 (0x00U << 4)
#define HW_SDIO_DBLOCKSIZE_2 (0x01U << 4)
#define HW_SDIO_DBLOCKSIZE_4 (0x02U << 4)
#define HW_SDIO_DBLOCKSIZE_8 (0x03U << 4)
#define HW_SDIO_DBLOCKSIZE_16 (0x04U << 4)
#define HW_SDIO_DBLOCKSIZE_32 (0x05U << 4)
#define HW_SDIO_DBLOCKSIZE_64 (0x06U << 4)
#define HW_SDIO_DBLOCKSIZE_128 (0x07U << 4)
#define HW_SDIO_DBLOCKSIZE_256 (0x08U << 4)
#define HW_SDIO_DBLOCKSIZE_512 (0x09U << 4)
#define HW_SDIO_DBLOCKSIZE_1024 (0x0AU << 4)
#define HW_SDIO_DBLOCKSIZE_2048 (0x0BU << 4)
#define HW_SDIO_DBLOCKSIZE_4096 (0x0CU << 4)
#define HW_SDIO_DBLOCKSIZE_8192 (0x0DU << 4)
#define HW_SDIO_DBLOCKSIZE_16384 (0x0EU << 4)
#define HW_SDIO_DMA_ENABLE (0x01U << 3)
#define HW_SDIO_STREAM_ENABLE (0x01U << 2)
#define HW_SDIO_TO_HOST (0x01U << 1)
#define HW_SDIO_DPSM_ENABLE (0x01U << 0)
#define HW_SDIO_DATATIMEOUT (0xF0000000U)
// struct ab32_sdio
// {};
typedef rt_err_t (*dma_txconfig)(rt_uint32_t *src, int size);
typedef rt_err_t (*dma_rxconfig)(rt_uint32_t *dst, int size);
typedef rt_uint32_t (*sdio_clk_get)(hal_sfr_t hw_sdio);
struct ab32_sdio_des
{
hal_sfr_t hw_sdio;
dma_txconfig txconfig;
dma_rxconfig rxconfig;
sdio_clk_get clk_get;
};
struct ab32_sdio_config
{
hal_sfr_t instance;
// struct dma_config dma_rx, dma_tx;
};
struct ab32_sdio_class
{
const struct ab32_sdio_config *cfg;
struct rt_mmcsd_host host;
};
#endif