rt-thread-official/bsp/acm32f4xx-nucleo/libraries/HAL_Driver/Inc/HAL_I2S.h

249 lines
9.3 KiB
C

/*
******************************************************************************
* @file HAL_I2S.h
* @version V1.0.0
* @date 2020
* @brief Header file of I2S HAL module.
******************************************************************************
*/
#ifndef __HAL_I2S_H__
#define __HAL_I2S_H__
#include "ACM32Fxx_HAL.h"
/************************************************************************************/
/* Registers Bits Definition */
/************************************************************************************/
/**************** Bit definition for I2S CTL Register ***********************/
#define I2S_CTL_I2SEN (BIT10)
#define I2S_CTL_I2SOPMOD (BIT9|BIT8)
#define I2S_CTL_PCMSMOD (BIT7)
#define I2S_CTL_I2SSTD (BIT5|BIT4)
#define I2S_CTL_CKPL (BIT3)
#define I2S_CTL_DTLEN (BIT2|BIT1)
#define I2S_CTL_CHLEN (BIT0)
/**************** Bit definition for I2S PSC Register ***********************/
#define I2S_PSC_MCKOEN (BIT10)
#define I2S_PSC_OF (BIT9)
#define I2S_PSC_DIV (0x1FF)
/**************** Bit definition for I2S DIE Register ***********************/
#define I2S_DIE_TBEIE (BIT7)
#define I2S_DIE_RBNEIE (BIT6)
#define I2S_DIE_ERRIE (BIT5)
#define I2S_DIE_DMATEN (BIT1)
#define I2S_DIE_DMAREN (BIT0)
/**************** Bit definition for I2S STATUS Register ***********************/
#define I2S_STATUS_FERR (BIT8)
#define I2S_STATUS_TRANS (BIT7)
#define I2S_STATUS_RXORERR (BIT6)
#define I2S_STATUS_TXURERR (BIT3)
#define I2S_STATUS_I2SCH (BIT2)
#define I2S_STATUS_TXBE (BIT1)
#define I2S_STATUS_RXBNE (BIT0)
/** @defgroup I2S_Mode I2S Mode
* @{
*/
#define I2S_MODE_SLAVE_TX (0x00000000)
#define I2S_MODE_SLAVE_RX (0x00000100)
#define I2S_MODE_MASTER_TX (0x00000200)
#define I2S_MODE_MASTER_RX (I2S_CTL_I2SOPMOD)
/**
* @}
*/
/** @defgroup I2S_Standard I2S Standard
* @{
*/
#define I2S_STANDARD_PHILIPS (0x00000000U)
#define I2S_STANDARD_MSB (0x00000010U)
#define I2S_STANDARD_LSB (0x00000020U)
#define I2S_STANDARD_PCM_SHORT (I2S_CTL_I2SSTD)
#define I2S_STANDARD_PCM_LONG (I2S_CTL_I2SSTD | I2S_CTL_PCMSMOD)
/**
* @}
*/
/** @defgroup I2S_Data_Format I2S Data Format
* @{
*/
#define I2S_DATAFORMAT_16B (0x00000000U)
#define I2S_DATAFORMAT_16B_EXTENDED (I2S_CTL_CHLEN)
#define I2S_DATAFORMAT_24B (I2S_CTL_CHLEN | 0x02)
#define I2S_DATAFORMAT_32B (I2S_CTL_CHLEN | 0x04)
/**
* @}
*/
/** @defgroup I2S_MCLK_Output I2S MCLK Output
* @{
*/
#define I2S_MCLKOUTPUT_ENABLE (I2S_PSC_MCKOEN)
#define I2S_MCLKOUTPUT_DISABLE (0x00000000U)
/**
* @}
*/
/** @defgroup I2S_Clock_Polarity I2S Clock Polarity
* @{
*/
#define I2S_CPOL_LOW (0x00000000U)
#define I2S_CPOL_HIGH (I2S_CTL_CKPL)
/**
* @}
*/
/** @defgroup I2S_Audio_FrequencyOF I2S Clock Frequency OF
* @{
*/
#define I2S_FREQ_OF_DISABLE (0x00000000U)
#define I2S_FREQ_OF_ENABLE (I2S_PSC_OF)
/**
* @}
*/
/**
* @brief HAL State structures definition
*/
typedef enum
{
HAL_I2S_STATE_RESET = 0x00U, /*!< I2S not yet initialized or disabled */
HAL_I2S_STATE_READY = 0x01U, /*!< I2S initialized and ready for use */
HAL_I2S_STATE_BUSY = 0x02U, /*!< I2S internal process is ongoing */
HAL_I2S_STATE_BUSY_TX = 0x03U, /*!< Data Transmission process is ongoing */
HAL_I2S_STATE_BUSY_RX = 0x04U, /*!< Data Reception process is ongoing */
HAL_I2S_STATE_TIMEOUT = 0x06U, /*!< I2S timeout state */
HAL_I2S_STATE_ERROR = 0x07U /*!< I2S error state */
}enum_I2S_State;
/**
* @brief I2S Init structure definition
*/
typedef struct
{
uint32_t u32_Mode; /*!< Specifies the I2S operating mode.
This parameter can be a value of @ref I2S_Mode */
uint32_t u32_Standard; /*!< Specifies the standard used for the I2S communication.
This parameter can be a value of @ref I2S_Standard */
uint32_t u32_DataFormat; /*!< Specifies the data format for the I2S communication.
This parameter can be a value of @ref I2S_Data_Format */
uint32_t u32_MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not.
This parameter can be a value of @ref I2S_MCLK_Output */
uint32_t u32_CPOL; /*!< Specifies the idle state of the I2S clock.
This parameter can be a value of @ref I2S_Clock_Polarity */
uint32_t u32_FreqOF; /*!< Specifies the frequency selected for the I2S communication.
This parameter can be a value of @ref I2S_Audio_FrequencyFO */
uint32_t u32_FreqDIV; /*!< Specifies the frequency selected for the I2S communication.
This parameter must be a number between Min_Data = 0x001 and Max_Data = 0x1FF */
}I2S_InitTypeDef;
/**
* @brief I2S handle Structure definition
*/
typedef struct
{
I2S_TypeDef *Instance; /*!< I2S registers base address */
I2S_InitTypeDef Init; /*!< I2S communication parameters */
enum_I2S_State I2S_Status;
uint32_t *u32_Rx_Buffer; /* I2S Rx Buffer */
uint32_t *u32_Tx_Buffer; /* I2S Tx Buffer */
uint32_t u32_Rx_Size; /* I2S Rx Size */
uint32_t u32_Tx_Size; /* I2S Tx Size */
uint32_t u32_Rx_Count; /* I2S RX Count */
uint32_t u32_Tx_Count; /* I2S TX Count */
DMA_HandleTypeDef *HDMA_Rx; /* SPI Rx DMA handle parameters */
DMA_HandleTypeDef *HDMA_Tx; /* SPI Tx DMA handle parameters */
}I2S_HandleTypeDef;
/** @defgroup RTC Private Macros
* @{
*/
#define IS_I2S_MODE(__MODE__) (((__MODE__) == I2S_MODE_SLAVE_TX) || \
((__MODE__) == I2S_MODE_SLAVE_RX) || \
((__MODE__) == I2S_MODE_MASTER_TX) || \
((__MODE__) == I2S_MODE_MASTER_RX))
#define IS_I2S_STANDARD(__STANDARD__) (((__STANDARD__) == I2S_STANDARD_PHILIPS) || \
((__STANDARD__) == I2S_STANDARD_MSB) || \
((__STANDARD__) == I2S_STANDARD_LSB) || \
((__STANDARD__) == I2S_STANDARD_PCM_SHORT) || \
((__STANDARD__) == I2S_STANDARD_PCM_LONG))
#define IS_I2S_DATAFORMAT(__DATAFORMAT__) (((__DATAFORMAT__) == I2S_DATAFORMAT_16B) || \
((__DATAFORMAT__) == I2S_DATAFORMAT_16B_EXTENDED) || \
((__DATAFORMAT__) == I2S_DATAFORMAT_24B) || \
((__DATAFORMAT__) == I2S_DATAFORMAT_32B))
#define IS_I2S_MCLK_OUTPUT(__MCLK_OUTPUT__) (((__MCLK_OUTPUT__) == I2S_MCLKOUTPUT_ENABLE) || \
((__MCLK_OUTPUT__) == I2S_MCLKOUTPUT_DISABLE))
#define IS_I2S_MCLK_CPOL(__CPOL__) (((__CPOL__) == I2S_CPOL_LOW) || \
((__CPOL__) == I2S_CPOL_HIGH))
#define IS_I2S_OF(__OF__) (((__OF__) == I2S_FREQ_OF_DISABLE) || \
((__OF__) == I2S_FREQ_OF_ENABLE))
#define IS_I2S_DIV(__DIV__) ((__DIV__) >= 0x001 && (__DIV__) <= 0x1FF)
/**
* @}
*/
/* HAL_I2S_IRQHandler */
void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s);
/* HAL_I2S_MspInit */
void HAL_I2S_MspInit(I2S_HandleTypeDef *hspi);
/* HAL_I2S_Init */
HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s);
/* HAL_I2S_Transmit */
HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint32_t *fp32_Data, uint32_t fu32_Size, uint32_t fu32_Timeout);
/* HAL_I2S_Receive */
HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint32_t *fp32_Data, uint32_t fu32_Size, uint32_t fu32_Timeout);
/* HAL_I2S_Transmit_IT */
HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint32_t *fp32_Data, uint32_t fu32_Size);
/* HAL_I2S_Receive_IT */
HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint32_t *fp32_Data, uint32_t fu32_Size);
/* HAL_I2S_Transmit_DMA */
HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint32_t *fp32_Data, uint32_t fu32_Size);
/* HAL_I2S_Receive_DMA */
HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint32_t *fp32_Data, uint32_t fu32_Size);
#endif