libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity
rt-thread-official/bsp/wch/risc-v/Libraries/ch56x_drivers/ch56x_spi.c

320 lines
8.1 KiB
C
Raw Blame History

/*
* Copyright (c) 2006-2023, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2022-07-30 Emuzit first version
*/
#include <rthw.h>
#include "drivers/dev_spi.h"
#include <drivers/dev_pin.h>
#include "ch56x_spi.h"
#include "ch56x_sys.h"
#if !defined(BSP_USING_SPI0) && !defined(BSP_USING_SPI1)
#error "Please define at least one SPIx"
#endif
struct spi_bus
{
struct rt_spi_bus parent;
volatile struct spi_registers *reg_base;
irq_number_t irqn;
char *name;
rt_base_t sck_pin;
rt_base_t mosi_pin;
rt_base_t miso_pin;
};
#ifdef BSP_USING_SPI0
static struct spi_bus spi_bus_0 =
{
.reg_base = (struct spi_registers *)SPI0_REG_BASE,
.irqn = SPI0_IRQn,
.name = SPI0_BUS_NAME,
.sck_pin = SPI0_SCK_PIN,
.mosi_pin = SPI0_MOSI_PIN,
.miso_pin = SPI0_MISO_PIN,
};
#endif
#ifdef BSP_USING_SPI1
static struct spi_bus spi_bus_1 =
{
.reg_base = (struct spi_registers *)SPI1_REG_BASE,
.irqn = SPI1_IRQn,
.name = SPI1_BUS_NAME,
.sck_pin = SPI1_SCK_PIN,
.mosi_pin = SPI1_MOSI_PIN,
.miso_pin = SPI1_MISO_PIN,
};
#endif
static uint8_t _spi_pin_config(struct rt_spi_device *device, struct rt_spi_configuration *config)
{
struct spi_bus *spi_bus = (struct spi_bus *)device->bus;
uint8_t mode;
/* RT_SPI_3WIRE means SI/SO pin shared */
mode = config->mode & (RT_SPI_MASTER | RT_SPI_SLAVE | RT_SPI_3WIRE);
if (mode == RT_SPI_MASTER)
{
mode = RB_SPI_MOSI_OE | RB_SPI_SCK_OE;
rt_pin_mode(spi_bus->mosi_pin, PIN_MODE_OUTPUT);
rt_pin_mode(spi_bus->sck_pin, PIN_MODE_OUTPUT);
}
else if (mode == RT_SPI_SLAVE)
{
mode = RB_SPI_MISO_OE | RB_SPI_MODE_SLAVE;
rt_pin_mode(spi_bus->miso_pin, PIN_MODE_OUTPUT);
}
else if (mode == RT_SPI_MASTER | RT_SPI_3WIRE)
{
mode = RB_SPI_2WIRE_MOD | RB_SPI_MISO_OE | RB_SPI_SCK_OE;
rt_pin_mode(spi_bus->miso_pin, PIN_MODE_INPUT);
rt_pin_mode(spi_bus->sck_pin, PIN_MODE_OUTPUT);
}
else
{
mode = RB_SPI_2WIRE_MOD | RB_SPI_MISO_OE | RB_SPI_MODE_SLAVE;
rt_pin_mode(spi_bus->miso_pin, PIN_MODE_INPUT);
}
return mode;
}
static rt_err_t spi_configure(struct rt_spi_device *device, struct rt_spi_configuration *config)
{
volatile struct spi_registers *sxreg;
struct rt_spi_device *owner;
union _spi_ctrl_mod ctrl_mod;
uint8_t mode;
uint32_t Fsys;
uint32_t div;
rt_base_t cs_pin;
int inactive;
RT_ASSERT(device != RT_NULL);
/* ch56x SPI supports only 8-bit data */
if (config->data_width != 8)
return -RT_EINVAL;
ctrl_mod.reg = _spi_pin_config(device, config);
/* ch56x SPI supports only mode 0 & mode 3 */
mode = config->mode & (RT_SPI_CPOL | RT_SPI_CPHA);
if (mode == RT_SPI_MODE_0)
ctrl_mod.mst_sck_mod = MST_SCK_MOD_0;
else if (mode == RT_SPI_MODE_3)
ctrl_mod.mst_sck_mod = MST_SCK_MOD_3;
else
return -RT_EINVAL;
/* CLOCK_DIV is 8-bit, reject excessively low max_hz */
Fsys = sys_hclk_get();
if (config->max_hz < Fsys / 255)
return -RT_EINVAL;
/* minimum allowable CLOCK_DIV is 2 */
div = (Fsys + config->max_hz - 1) / config->max_hz;
if (div < 2)
div = 2;
sxreg = ((struct spi_bus *)device->bus)->reg_base;
sxreg->CLOCK_DIV = div;
mode = config->mode & (RT_SPI_MSB | RT_SPI_LSB);
sxreg->CTRL_CFG.reg = (mode == RT_SPI_MSB) ? 0 : RB_SPI_BIT_ORDER;
sxreg->INTER_EN.reg = 0;
ctrl_mod.all_clear = 1;
sxreg->CTRL_MOD.reg = ctrl_mod.reg;
ctrl_mod.all_clear = 0;
sxreg->CTRL_MOD.reg = ctrl_mod.reg;
mode = config->mode & (RT_SPI_MASTER | RT_SPI_SLAVE);
if (mode == RT_SPI_MASTER)
{
/* get bus owner before this configure */
owner = device->bus->owner;
if (owner && owner != device)
{
/* make sure predecessor's CS is deactived */
inactive = (owner->config.mode & RT_SPI_CS_HIGH) ? PIN_LOW : PIN_HIGH;
cs_pin = (rt_base_t)owner->parent.user_data;
rt_pin_write(cs_pin, inactive);
}
/* bus owner is maintained by upper layer, do not update here */
inactive = (config->mode & RT_SPI_CS_HIGH) ? PIN_LOW : PIN_HIGH;
cs_pin = (rt_base_t)device->parent.user_data;
rt_pin_write(cs_pin, inactive);
rt_pin_mode(cs_pin, PIN_MODE_OUTPUT);
}
/* `config` is actually `device->config` : spi_core.c */
//device->config = *config;
return RT_EOK;
}
/**
* @brief Transfer SPI data for single message.
* Message traversing is done by rt_spi_message().
*
* @param device is pointer to the rt_spi_device device.
*
* @param message is a link list for data/control information,
* only the first entry is processed.
* Note: ch56x can't do SPI send & recv at the same time.
*
* @return `message->length1 if successful, 0 otherwise.
*/
static rt_uint32_t spi_xfer(struct rt_spi_device *device, struct rt_spi_message *message)
{
struct spi_bus *spi_bus = (struct spi_bus *)device->bus;
volatile struct spi_registers *sxreg = spi_bus->reg_base;
union _spi_ctrl_mod ctrl_mod;
uint8_t *data;
uint32_t size;
rt_base_t cs_pin;
int cs_high;
size = message->length;
if (size == 0 || size > 4095)
return 0;
ctrl_mod.reg = sxreg->CTRL_MOD.reg | RB_SPI_ALL_CLEAR;
/* ch56x can't do SPI send & recv at the same time */
if (message->send_buf && !message->recv_buf)
{
data = (uint8_t *)message->send_buf;
ctrl_mod.fifo_dir = SPI_FIFO_DIR_OUTPUT;
}
else if (!message->send_buf && message->recv_buf)
{
data = (uint8_t *)message->recv_buf;
ctrl_mod.fifo_dir = SPI_FIFO_DIR_INPUT;
}
else
{
return 0;
}
sxreg->CTRL_MOD.reg = ctrl_mod.reg;
ctrl_mod.all_clear = 0;
sxreg->CTRL_MOD.reg = ctrl_mod.reg;
/* set MISO pin direction to match xfer if shared SI/SO pin */
if (device->config.mode & RT_SPI_3WIRE)
{
rt_base_t mode = message->send_buf ? PIN_MODE_OUTPUT : PIN_MODE_INPUT;
rt_pin_mode(spi_bus->miso_pin, mode);
}
cs_pin = (rt_base_t)device->parent.user_data;
cs_high = device->config.mode & RT_SPI_CS_HIGH;
if (message->cs_take)
{
/* take/activate CS */
rt_pin_write(cs_pin, cs_high ? PIN_HIGH : PIN_LOW);
}
sxreg->TOTAL_COUNT = size;
if (size > SPI_FIFO_SIZE)
{
sxreg->DMA_BIG = (uint32_t)data;
sxreg->DMA_END = (uint32_t)(data + size);
sxreg->CTRL_CFG.dma_enable = 1;
/* mark no need to read FIFO */
size = 0;
}
else
{
if (message->send_buf)
{
/* keep sending, won't overflow */
while (size)
{
sxreg->FIFO = *data++;
size--;
}
}
}
/* wait for transfer done */
while (sxreg->TOTAL_COUNT > 0);
/* disable DMA, anyway */
sxreg->CTRL_CFG.dma_enable = 0;
/* non-DMA recv => read data from FIFO */
if (size > 0)
{
while (size--)
*data++ = sxreg->FIFO;
}
/* set MISO as input after xfer if shared SI/SO pin */
if (device->config.mode & RT_SPI_3WIRE)
{
rt_pin_mode(spi_bus->miso_pin, PIN_MODE_INPUT);
}
if (message->cs_release)
{
/* release/deactivate CS */
rt_pin_write(cs_pin, cs_high ? PIN_LOW : PIN_HIGH);
}
return message->length;
}
static const struct rt_spi_ops spi_ops =
{
.configure = spi_configure,
.xfer = spi_xfer,
};
static int rt_hw_spi_init(void)
{
struct spi_bus *devices[2];
rt_err_t res, ret = RT_EOK;
int n = 0;
#ifdef BSP_USING_SPI1
devices[n++] = &spi_bus_1;
#endif
#ifdef BSP_USING_SPI0
devices[n++] = &spi_bus_0;
#endif
while (--n >= 0)
{
struct spi_bus *spi_bus = devices[n];
sys_clk_off_by_irqn(spi_bus->irqn, SYS_SLP_CLK_ON);
res = rt_spi_bus_register(&spi_bus->parent, spi_bus->name, &spi_ops);
if (res != RT_EOK)
{
ret = res;
}
};
return ret;
}
INIT_DEVICE_EXPORT(rt_hw_spi_init);
View Git Blame Copy Permalink