bb1084556f
* [console] 解决在没有定义RT_USING_DEVICE的情况下使用device报错的问题 * format codes * [libc] 整理格式 * refresh projects |
||
|---|---|---|
| .. | ||
| applications | ||
| board | ||
| libraries | ||
| .config | ||
| Kconfig | ||
| README.md | ||
| SConscript | ||
| SConstruct | ||
| apollo2 evaluation board skt.jpg | ||
| project.uvoptx | ||
| project.uvprojx | ||
| rtconfig.h | ||
| rtconfig.py | ||
| rtthread.sct | ||
| rtthread_link.ld | ||
| template.uvoptx | ||
| template.uvprojx | ||
README.md
Apollo2 MCU是基于Ambiq Micro的Apollo MCU产品系列的第二代控制器。
Ambiq使用专利亚阈值功率优化技术（Subthreshold Power Optimized Technology， SPOT）平台来实现惊人的功耗降低，其功耗通常比性能相近的其它MCU产品降低5至10倍。
Apollo2 MCU采用32位ARM Cortex-M4F微控制器，集成了高达1 MB的闪存和256 KB的RAM，以适应无线电和传感器开销，同时仍留有足够的应用代码空间。该微控制器还包括串行主机和UART端口，用于与无线电和传感器通信，包括加速度计，陀螺仪和磁力计。
Features
Ultra-low supply current
10 μA/MHz executing from flash at 3.3 V
10 μA/MHz executing from RAM at 3.3 V
High-performance ARM Cortex-M4 Processor
Up to 48 MHz clock frequency
Floating point unit
Memory protection unit
Wake-up interrupt controller with 32 interrupts
Ultra-low power memory:
Up to 1 MB of flash memory for code/data
Up to 256 KB of low leakage RAM for code/data
16kB 1 or 2-way Associative Cache
Ultra-low power interface for off-chip sensors:
14 bit, 15-channel, up to 1.2 MS/s ADC
Voltage Comparator
Temperature sensor with +/-2C accuracy
Flexible serial peripherals:
6x I2C/SPI master for communication with sensors,?radios, and other peripherals
1x I2C/SPI slave for host communications
2x UART for communication with peripherals and?legacy devices
PDM for mono and stereo audio microphone
Rich set of clock sources:
32.768 kHz XTAL oscillator
Low frequency RC oscillator – 1.024 kHz
High frequency RC oscillator – 48 MHz
RTC based on Ambiq’s AM08X5/18X5 families
Wide operating range: 1.8-3.6 V, –40 to 85°C
Compact package options:
2.5 x 2.5 mm 49-pin CSP with 34 GPIO
4.5 x 4.5 mm 64-pin BGA with 50 GPIO
Board info
Apollo2 Evaluation Board（http://ambiqmicro.com/apollo-ultra-low-power-mcu/apollo2-mcu-20170703/）