rt-thread-official/bsp/imxrt1052-evk/drivers/usb/device/usb_device.h

645 lines
29 KiB
C

/*
* Copyright (c) 2015 - 2016, Freescale Semiconductor, Inc.
* Copyright 2016 NXP
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* o Redistributions of source code must retain the above copyright notice, this list
* of conditions and the following disclaimer.
*
* o Redistributions in binary form must reproduce the above copyright notice, this
* list of conditions and the following disclaimer in the documentation and/or
* other materials provided with the distribution.
*
* o Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef __FSL_USB_DEVICE_H__
#define __FSL_USB_DEVICE_H__
/*!
* @addtogroup usb_device_driver
* @{
*/
/*******************************************************************************
* Definitions
******************************************************************************/
/*! @brief Defines Get/Set status Types */
typedef enum _usb_device_status
{
kUSB_DeviceStatusTestMode = 1U, /*!< Test mode */
kUSB_DeviceStatusSpeed, /*!< Current speed */
kUSB_DeviceStatusOtg, /*!< OTG status */
kUSB_DeviceStatusDevice, /*!< Device status */
kUSB_DeviceStatusEndpoint, /*!< Endpoint state usb_device_endpoint_status_t */
kUSB_DeviceStatusDeviceState, /*!< Device state */
kUSB_DeviceStatusAddress, /*!< Device address */
kUSB_DeviceStatusSynchFrame, /*!< Current frame */
kUSB_DeviceStatusBus, /*!< Bus status */
kUSB_DeviceStatusBusSuspend, /*!< Bus suspend */
kUSB_DeviceStatusBusSleep, /*!< Bus suspend */
kUSB_DeviceStatusBusResume, /*!< Bus resume */
kUSB_DeviceStatusRemoteWakeup, /*!< Remote wakeup state */
kUSB_DeviceStatusBusSleepResume, /*!< Bus resume */
} usb_device_status_t;
/*! @brief Defines USB 2.0 device state */
typedef enum _usb_device_state
{
kUSB_DeviceStateConfigured = 0U, /*!< Device state, Configured*/
kUSB_DeviceStateAddress, /*!< Device state, Address*/
kUSB_DeviceStateDefault, /*!< Device state, Default*/
kUSB_DeviceStateAddressing, /*!< Device state, Address setting*/
kUSB_DeviceStateTestMode, /*!< Device state, Test mode*/
} usb_device_state_t;
#if (defined(USB_DEVICE_CHARGER_DETECT_ENABLE) && (USB_DEVICE_CHARGER_DETECT_ENABLE > 0U))
typedef enum _usb_dcd_detection_sequence_status
{
kUSB_DcdDetectionNotEnabled = 0x0U,
kUSB_DcdDataPinDetectionCompleted = 0x01U,
kUSB_DcdChargingPortDetectionCompleted = 0x02U,
kUSB_DcdChargerTypeDetectionCompleted = 0x03U,
} usb_dcd_detection_sequence_status_t;
typedef enum _usb_dcd_detection_sequence_results
{
kUSB_DcdDetectionNoResults = 0x0U,
kUSB_DcdDetectionStandardHost = 0x01U,
kUSB_DcdDetectionChargingPort = 0x02U,
kUSB_DcdDetectionDedicatedCharger = 0x03U,
} usb_dcd_detection_sequence_results_t;
#endif
/*! @brief Defines endpoint state */
typedef enum _usb_endpoint_status
{
kUSB_DeviceEndpointStateIdle = 0U, /*!< Endpoint state, idle*/
kUSB_DeviceEndpointStateStalled, /*!< Endpoint state, stalled*/
} usb_device_endpoint_status_t;
/*! @brief Control endpoint index */
#define USB_CONTROL_ENDPOINT (0U)
/*! @brief Control endpoint maxPacketSize */
#define USB_CONTROL_MAX_PACKET_SIZE (64U)
#if (USB_DEVICE_CONFIG_EHCI && (USB_CONTROL_MAX_PACKET_SIZE != (64U)))
#error For high speed, USB_CONTROL_MAX_PACKET_SIZE must be 64!!!
#endif
/*! @brief The setup packet size of USB control transfer. */
#define USB_SETUP_PACKET_SIZE (8U)
/*! @brief USB endpoint mask */
#define USB_ENDPOINT_NUMBER_MASK (0x0FU)
/*! @brief Default invalid value or the endpoint callback length of cancelled transfer */
#define USB_UNINITIALIZED_VAL_32 (0xFFFFFFFFU)
/*! @brief Available common EVENT types in device callback */
typedef enum _usb_device_event
{
kUSB_DeviceEventBusReset = 1U, /*!< USB bus reset signal detected */
kUSB_DeviceEventSuspend, /*!< USB bus suspend signal detected */
kUSB_DeviceEventResume, /*!< USB bus resume signal detected. The resume signal is driven by itself or a host */
kUSB_DeviceEventSleeped, /*!< USB bus LPM suspend signal detected */
kUSB_DeviceEventLPMResume, /*!< USB bus LPM resume signal detected. The resume signal is driven by itself or a host
*/
kUSB_DeviceEventError, /*!< An error is happened in the bus. */
kUSB_DeviceEventDetach, /*!< USB device is disconnected from a host. */
kUSB_DeviceEventAttach, /*!< USB device is connected to a host. */
kUSB_DeviceEventSetConfiguration, /*!< Set configuration. */
kUSB_DeviceEventSetInterface, /*!< Set interface. */
kUSB_DeviceEventGetDeviceDescriptor, /*!< Get device descriptor. */
kUSB_DeviceEventGetConfigurationDescriptor, /*!< Get configuration descriptor. */
kUSB_DeviceEventGetStringDescriptor, /*!< Get string descriptor. */
kUSB_DeviceEventGetHidDescriptor, /*!< Get HID descriptor. */
kUSB_DeviceEventGetHidReportDescriptor, /*!< Get HID report descriptor. */
kUSB_DeviceEventGetHidPhysicalDescriptor, /*!< Get HID physical descriptor. */
kUSB_DeviceEventGetBOSDescriptor, /*!< Get configuration descriptor. */
kUSB_DeviceEventGetDeviceQualifierDescriptor, /*!< Get device qualifier descriptor. */
kUSB_DeviceEventVendorRequest, /*!< Vendor request. */
kUSB_DeviceEventSetRemoteWakeup, /*!< Enable or disable remote wakeup function. */
kUSB_DeviceEventGetConfiguration, /*!< Get current configuration index */
kUSB_DeviceEventGetInterface, /*!< Get current interface alternate setting value */
kUSB_DeviceEventSetBHNPEnable,
#if (defined(USB_DEVICE_CHARGER_DETECT_ENABLE) && (USB_DEVICE_CHARGER_DETECT_ENABLE > 0U))
kUSB_DeviceEventDcdTimeOut, /*!< Dcd detect result is timeout */
kUSB_DeviceEventDcdUnknownType, /*!< Dcd detect result is unknown type */
kUSB_DeviceEventSDPDetected, /*!< The SDP facility is detected */
kUSB_DeviceEventChargingPortDetected, /*!< The charging port is detected */
kUSB_DeviceEventChargingHostDetected, /*!< The CDP facility is detected */
kUSB_DeviceEventDedicatedChargerDetected, /*!< The DCP facility is detected */
#endif
} usb_device_event_t;
/*! @brief Endpoint callback message structure */
typedef struct _usb_device_endpoint_callback_message_struct
{
uint8_t *buffer; /*!< Transferred buffer */
uint32_t length; /*!< Transferred data length */
uint8_t isSetup; /*!< Is in a setup phase */
} usb_device_endpoint_callback_message_struct_t;
/*!
* @brief Endpoint callback function typedef.
*
* This callback function is used to notify the upper layer what the transfer result is.
* This callback pointer is passed when a specified endpoint is initialized by calling API #USB_DeviceInitEndpoint.
*
* @param handle The device handle. It equals to the value returned from #USB_DeviceInit.
* @param message The result of a transfer, which includes transfer buffer, transfer length, and whether is in a
* setup phase.
* phase for control pipe.
* @param callbackParam The parameter for this callback. It is same with
* usb_device_endpoint_callback_struct_t::callbackParam.
*
* @return A USB error code or kStatus_USB_Success.
*/
typedef usb_status_t (*usb_device_endpoint_callback_t)(usb_device_handle handle,
usb_device_endpoint_callback_message_struct_t *message,
void *callbackParam);
/*!
* @brief Device callback function typedef.
*
* This callback function is used to notify the upper layer that the device status has changed.
* This callback pointer is passed by calling API #USB_DeviceInit.
*
* @param handle The device handle. It equals the value returned from #USB_DeviceInit.
* @param callbackEvent The callback event type. See enumeration #usb_device_event_t.
* @param eventParam The event parameter for this callback. The parameter type is determined by the callback event.
*
* @return A USB error code or kStatus_USB_Success.
*/
typedef usb_status_t (*usb_device_callback_t)(usb_device_handle handle, uint32_t callbackEvent, void *eventParam);
/*! @brief Endpoint callback structure */
typedef struct _usb_device_endpoint_callback_struct
{
usb_device_endpoint_callback_t callbackFn; /*!< Endpoint callback function*/
void *callbackParam; /*!< Parameter for callback function*/
uint8_t isBusy;
} usb_device_endpoint_callback_struct_t;
/*! @brief Endpoint initialization structure */
typedef struct _usb_device_endpoint_init_struct
{
uint16_t maxPacketSize; /*!< Endpoint maximum packet size */
uint8_t endpointAddress; /*!< Endpoint address*/
uint8_t transferType; /*!< Endpoint transfer type*/
uint8_t zlt; /*!< ZLT flag*/
} usb_device_endpoint_init_struct_t;
/*! @brief Endpoint status structure */
typedef struct _usb_device_endpoint_status_struct
{
uint8_t endpointAddress; /*!< Endpoint address */
uint16_t endpointStatus; /*!< Endpoint status : idle or stalled */
} usb_device_endpoint_status_struct_t;
#if (defined(USB_DEVICE_CHARGER_DETECT_ENABLE) && (USB_DEVICE_CHARGER_DETECT_ENABLE > 0U))
/*! @brief USB DCD charge timing specification structure */
typedef struct _usb_device_dcd_charging_time
{
uint16_t dcdSeqInitTime; /*!< The dcd sequence init time */
uint16_t dcdDbncTime; /*!< The debounce time period on DP signal */
uint16_t dcdDpSrcOnTime; /*!< The time period comparator enabled */
uint16_t dcdTimeWaitAfterPrD; /*!< The time period between primary and secondary detection */
uint8_t dcdTimeDMSrcOn; /*!< The amount of time that the modules enable the Vdm_src */
} usb_device_dcd_charging_time_t;
#endif
#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus*/
/*!
* @name USB device APIs
* @{
*/
/*******************************************************************************
* API
******************************************************************************/
/*!
* @brief Initializes the USB device stack.
*
* This function initializes the USB device module specified by the controllerId.
*
* @param[in] controllerId The controller ID of the USB IP. See the enumeration #usb_controller_index_t.
* @param[in] deviceCallback Function pointer of the device callback.
* @param[out] handle It is an out parameter used to return the pointer of the device handle to the caller.
*
* @retval kStatus_USB_Success The device is initialized successfully.
* @retval kStatus_USB_InvalidHandle The handle is a NULL pointer.
* @retval kStatus_USB_Busy Cannot allocate a device handle.
* @retval kStatus_USB_ControllerNotFound Cannot find the controller according to the controller id.
* @retval kStatus_USB_InvalidControllerInterface The controller driver interfaces is invalid. There is an empty
* interface entity.
* @retval kStatus_USB_Error The macro USB_DEVICE_CONFIG_ENDPOINTS is more than the IP's endpoint number.
* Or, the device has been initialized.
* Or, the mutex or message queue is created failed.
*/
extern usb_status_t USB_DeviceInit(uint8_t controllerId,
usb_device_callback_t deviceCallback,
usb_device_handle *handle);
/*!
* @brief Enables the device functionality.
*
* The function enables the device functionality, so that the device can be recognized by the host when the device
* detects that it has been connected to a host.
*
* @param[in] handle The device handle got from #USB_DeviceInit.
*
* @retval kStatus_USB_Success The device is run successfully.
* @retval kStatus_USB_ControllerNotFound Cannot find the controller.
* @retval kStatus_USB_InvalidHandle The device handle is a NULL pointer. Or the controller handle is invalid.
*
*/
extern usb_status_t USB_DeviceRun(usb_device_handle handle);
/*!
* @brief Disables the device functionality.
*
* The function disables the device functionality. After this function called, even if the device is detached to the
* host,
* it can't work.
*
* @param[in] handle The device handle received from #USB_DeviceInit.
*
* @retval kStatus_USB_Success The device is stopped successfully.
* @retval kStatus_USB_ControllerNotFound Cannot find the controller.
* @retval kStatus_USB_InvalidHandle The device handle is a NULL pointer or the controller handle is invalid.
*/
extern usb_status_t USB_DeviceStop(usb_device_handle handle);
/*!
* @brief De-initializes the device controller.
*
* The function de-initializes the device controller specified by the handle.
*
* @param[in] handle The device handle got from #USB_DeviceInit.
*
* @retval kStatus_USB_Success The device is stopped successfully.
* @retval kStatus_USB_InvalidHandle The device handle is a NULL pointer or the controller handle is invalid.
*/
extern usb_status_t USB_DeviceDeinit(usb_device_handle handle);
/*!
* @brief Sends data through a specified endpoint.
*
* The function is used to send data through a specified endpoint.
*
* @param[in] handle The device handle got from #USB_DeviceInit.
* @param[in] endpointAddress Endpoint index.
* @param[in] buffer The memory address to hold the data need to be sent. The function is not reentrant.
* @param[in] length The data length need to be sent.
*
* @retval kStatus_USB_Success The send request is sent successfully.
* @retval kStatus_USB_InvalidHandle The handle is a NULL pointer. Or the controller handle is invalid.
* @retval kStatus_USB_Busy Cannot allocate DTDS for current transfer in EHCI driver.
* @retval kStatus_USB_ControllerNotFound Cannot find the controller.
* @retval kStatus_USB_Error The device is doing reset.
*
* @note The return value indicates whether the sending request is successful or not. The transfer done is notified by
* the
* corresponding callback function.
* Currently, only one transfer request can be supported for one specific endpoint.
* If there is a specific requirement to support multiple transfer requests for one specific endpoint, the application
* should implement a queue on the application level.
* The subsequent transfer can begin only when the previous transfer is done (get notification through the endpoint
* callback).
*/
extern usb_status_t USB_DeviceSendRequest(usb_device_handle handle,
uint8_t endpointAddress,
uint8_t *buffer,
uint32_t length);
/*!
* @brief Receives data through a specified endpoint.
*
* The function is used to receive data through a specified endpoint. The function is not reentrant.
*
* @param[in] handle The device handle got from #USB_DeviceInit.
* @param[in] endpointAddress Endpoint index.
* @param[in] buffer The memory address to save the received data.
* @param[in] length The data length want to be received.
*
* @retval kStatus_USB_Success The receive request is sent successfully.
* @retval kStatus_USB_InvalidHandle The handle is a NULL pointer. Or the controller handle is invalid.
* @retval kStatus_USB_Busy Cannot allocate DTDS for current transfer in EHCI driver.
* @retval kStatus_USB_ControllerNotFound Cannot find the controller.
* @retval kStatus_USB_Error The device is doing reset.
*
* @note The return value indicates whether the receiving request is successful or not. The transfer done is notified by
* the
* corresponding callback function.
* Currently, only one transfer request can be supported for one specific endpoint.
* If there is a specific requirement to support multiple transfer requests for one specific endpoint, the application
* should implement a queue on the application level.
* The subsequent transfer can begin only when the previous transfer is done (get notification through the endpoint
* callback).
*/
extern usb_status_t USB_DeviceRecvRequest(usb_device_handle handle,
uint8_t endpointAddress,
uint8_t *buffer,
uint32_t length);
/*!
* @brief Cancels the pending transfer in a specified endpoint.
*
* The function is used to cancel the pending transfer in a specified endpoint.
*
* @param[in] handle The device handle got from #USB_DeviceInit.
* @param[in] endpointAddress Endpoint address, bit7 is the direction of endpoint, 1U - IN, and 0U - OUT.
*
* @retval kStatus_USB_Success The transfer is cancelled.
* @retval kStatus_USB_InvalidHandle The handle is a NULL pointer or the controller handle is invalid.
* @retval kStatus_USB_ControllerNotFound Cannot find the controller.
*/
extern usb_status_t USB_DeviceCancel(usb_device_handle handle, uint8_t endpointAddress);
/*!
* @brief Initializes a specified endpoint.
*
* The function is used to initialize a specified endpoint. The corresponding endpoint callback is also initialized.
*
* @param[in] handle The device handle received from #USB_DeviceInit.
* @param[in] epInit Endpoint initialization structure. See the structure usb_device_endpoint_init_struct_t.
* @param[in] epCallback Endpoint callback structure. See the structure
* usb_device_endpoint_callback_struct_t.
*
* @retval kStatus_USB_Success The endpoint is initialized successfully.
* @retval kStatus_USB_InvalidHandle The handle is a NULL pointer. Or the controller handle is invalid.
* @retval kStatus_USB_InvalidParameter The epInit or epCallback is NULL pointer. Or the endpoint number is
* more than USB_DEVICE_CONFIG_ENDPOINTS.
* @retval kStatus_USB_Busy The endpoint is busy in EHCI driver.
* @retval kStatus_USB_ControllerNotFound Cannot find the controller.
*/
extern usb_status_t USB_DeviceInitEndpoint(usb_device_handle handle,
usb_device_endpoint_init_struct_t *epInit,
usb_device_endpoint_callback_struct_t *epCallback);
/*!
* @brief Deinitializes a specified endpoint.
*
* The function is used to deinitializes a specified endpoint.
*
* @param[in] handle The device handle got from #USB_DeviceInit.
* @param[in] endpointAddress Endpoint address, bit7 is the direction of endpoint, 1U - IN, and 0U - OUT.
*
* @retval kStatus_USB_Success The endpoint is de-initialized successfully.
* @retval kStatus_USB_InvalidHandle The handle is a NULL pointer. Or the controller handle is invalid.
* @retval kStatus_USB_InvalidParameter The endpoint number is more than USB_DEVICE_CONFIG_ENDPOINTS.
* @retval kStatus_USB_Busy The endpoint is busy in EHCI driver.
* @retval kStatus_USB_ControllerNotFound Cannot find the controller.
*/
extern usb_status_t USB_DeviceDeinitEndpoint(usb_device_handle handle, uint8_t endpointAddress);
/*!
* @brief Stalls a specified endpoint.
*
* The function is used to stall a specified endpoint.
*
* @param[in] handle The device handle received from #USB_DeviceInit.
* @param[in] endpointAddress Endpoint address, bit7 is the direction of endpoint, 1U - IN, and 0U - OUT.
*
* @retval kStatus_USB_Success The endpoint is stalled successfully.
* @retval kStatus_USB_InvalidHandle The handle is a NULL pointer. Or the controller handle is invalid.
* @retval kStatus_USB_InvalidParameter The endpoint number is more than USB_DEVICE_CONFIG_ENDPOINTS.
* @retval kStatus_USB_ControllerNotFound Cannot find the controller.
*/
extern usb_status_t USB_DeviceStallEndpoint(usb_device_handle handle, uint8_t endpointAddress);
/*!
* @brief Unstalls a specified endpoint.
*
* The function is used to unstall a specified endpoint.
*
* @param[in] handle The device handle received from #USB_DeviceInit.
* @param[in] endpointAddress Endpoint address, bit7 is the direction of endpoint, 1U - IN, and 0U - OUT.
*
* @retval kStatus_USB_Success The endpoint is unstalled successfully.
* @retval kStatus_USB_InvalidHandle The handle is a NULL pointer. Or the controller handle is invalid.
* @retval kStatus_USB_InvalidParameter The endpoint number is more than USB_DEVICE_CONFIG_ENDPOINTS.
* @retval kStatus_USB_ControllerNotFound Cannot find the controller.
*/
extern usb_status_t USB_DeviceUnstallEndpoint(usb_device_handle handle, uint8_t endpointAddress);
/*!
* @brief Gets the status of the selected item.
*
* The function is used to get the status of the selected item.
*
* @param[in] handle The device handle got from #USB_DeviceInit.
* @param[in] type The selected item. See the structure #usb_device_status_t.
* @param[out] param The parameter type is determined by the selected item.
*
* @retval kStatus_USB_Success Get status successfully.
* @retval kStatus_USB_InvalidHandle The handle is a NULL pointer. Or the controller handle is invalid.
* @retval kStatus_USB_InvalidParameter The parameter is NULL pointer.
* @retval kStatus_USB_ControllerNotFound Cannot find the controller.
* @retval kStatus_USB_Error Unsupported type.
*/
extern usb_status_t USB_DeviceGetStatus(usb_device_handle handle, usb_device_status_t type, void *param);
/*!
* @brief Sets the status of the selected item.
*
* The function is used to set the status of the selected item.
*
* @param[in] handle The device handle got from #USB_DeviceInit.
* @param[in] type The selected item. See the structure #usb_device_status_t.
* @param[in] param The parameter type is determined by the selected item.
*
* @retval kStatus_USB_Success Set status successfully.
* @retval kStatus_USB_InvalidHandle The handle is a NULL pointer. Or the controller handle is invalid.
* @retval kStatus_USB_ControllerNotFound Cannot find the controller.
* @retval kStatus_USB_Error Unsupported type or the parameter is NULL pointer.
*/
extern usb_status_t USB_DeviceSetStatus(usb_device_handle handle, usb_device_status_t type, void *param);
#if (defined(USB_DEVICE_CHARGER_DETECT_ENABLE) && (USB_DEVICE_CHARGER_DETECT_ENABLE > 0U))
/*!
* @brief Initializes the device dcd module.
*
* The function initializes the device dcd module.
*
* @param[in] handle The device handle got from #USB_DeviceInit.
* @param[in] time_param The time parameter used to config the dcd timing registers.
*
* @retval kStatus_USB_Success The device is run successfully.
* @retval kStatus_USB_ControllerNotFound Cannot find the controller.
* @retval kStatus_USB_InvalidHandle The device handle is a NULL pointer. Or the controller handle is invalid.
*
*/
extern usb_status_t USB_DeviceDcdInitModule(usb_device_handle handle, void *time_param);
/*!
* @brief De-initializes the device dcd module.
*
* The function de-initializes the device dcd module specified by the handle.
*
* @param[in] handle The device handle got from #USB_DeviceInit.
*
* @retval kStatus_USB_Success The device is stopped successfully.
* @retval kStatus_USB_InvalidHandle The device handle is a NULL pointer or the controller handle is invalid.
*/
extern usb_status_t USB_DeviceDcdDeinitModule(usb_device_handle handle);
#endif
/*!
* @brief Device task function.
*
* The function is used to handle the controller message.
* This function should not be called in the application directly.
*
* @param[in] deviceHandle The device handle got from #USB_DeviceInit.
*/
extern void USB_DeviceTaskFunction(void *deviceHandle);
#if ((defined(USB_DEVICE_CONFIG_KHCI)) && (USB_DEVICE_CONFIG_KHCI > 0U))
/*!
* @brief Device KHCI task function.
*
* The function is used to handle the KHCI controller message.
* In the bare metal environment, this function should be called periodically in the main function.
* In the RTOS environment, this function should be used as a function entry to create a task.
*
* @param[in] deviceHandle The device handle got from #USB_DeviceInit.
*/
#define USB_DeviceKhciTaskFunction(deviceHandle) USB_DeviceTaskFunction(deviceHandle)
#endif
#if ((defined(USB_DEVICE_CONFIG_EHCI)) && (USB_DEVICE_CONFIG_EHCI > 0U))
/*!
* @brief Device EHCI task function.
*
* The function is used to handle the EHCI controller message.
* In the bare metal environment, this function should be called periodically in the main function.
* In the RTOS environment, this function should be used as a function entry to create a task.
*
* @param[in] deviceHandle The device handle got from #USB_DeviceInit.
*/
#define USB_DeviceEhciTaskFunction(deviceHandle) USB_DeviceTaskFunction(deviceHandle)
#if (defined(USB_DEVICE_CHARGER_DETECT_ENABLE) && (USB_DEVICE_CHARGER_DETECT_ENABLE > 0U))
/*!
* @brief Device EHCI DCD ISR function.
*
* The function is the EHCI DCD interrupt service routine.
*
* @param[in] deviceHandle The device handle got from #USB_DeviceInit.
*/
extern void USB_DeviceDcdHSIsrFunction(void *deviceHandle);
#endif
#endif
#if (((defined(USB_DEVICE_CONFIG_LPCIP3511FS)) && (USB_DEVICE_CONFIG_LPCIP3511FS > 0U)) || \
((defined(USB_DEVICE_CONFIG_LPCIP3511HS)) && (USB_DEVICE_CONFIG_LPCIP3511HS > 0U)))
/*!
* @brief Device LPC ip3511 controller task function.
*
* The function is used to handle the LPC ip3511 controller message.
* In the bare metal environment, this function should be called periodically in the main function.
* In the RTOS environment, this function should be used as a function entry to create a task.
*
* @param[in] deviceHandle The device handle got from #USB_DeviceInit.
*/
#define USB_DeviceLpcIp3511TaskFunction(deviceHandle) USB_DeviceTaskFunction(deviceHandle)
#endif
#if ((defined(USB_DEVICE_CONFIG_KHCI)) && (USB_DEVICE_CONFIG_KHCI > 0U))
/*!
* @brief Device KHCI ISR function.
*
* The function is the KHCI interrupt service routine.
*
* @param[in] deviceHandle The device handle got from #USB_DeviceInit.
*/
extern void USB_DeviceKhciIsrFunction(void *deviceHandle);
#if (defined(USB_DEVICE_CHARGER_DETECT_ENABLE) && (USB_DEVICE_CHARGER_DETECT_ENABLE > 0U))
/*!
* @brief Device KHCI DCD ISR function.
*
* The function is the KHCI DCD interrupt service routine.
*
* @param[in] deviceHandle The device handle got from #USB_DeviceInit.
*/
extern void USB_DeviceDcdIsrFunction(void *deviceHandle);
#endif
#endif
#if ((defined(USB_DEVICE_CONFIG_EHCI)) && (USB_DEVICE_CONFIG_EHCI > 0U))
/*!
* @brief Device EHCI ISR function.
*
* The function is the EHCI interrupt service routine.
*
* @param[in] deviceHandle The device handle got from #USB_DeviceInit.
*/
extern void USB_DeviceEhciIsrFunction(void *deviceHandle);
#endif
#if (((defined(USB_DEVICE_CONFIG_LPCIP3511FS)) && (USB_DEVICE_CONFIG_LPCIP3511FS > 0U)) || \
((defined(USB_DEVICE_CONFIG_LPCIP3511HS)) && (USB_DEVICE_CONFIG_LPCIP3511HS > 0U)))
/*!
* @brief Device LPC USB ISR function.
*
* The function is the LPC USB interrupt service routine.
*
* @param[in] deviceHandle The device handle got from #USB_DeviceInit.
*/
extern void USB_DeviceLpcIp3511IsrFunction(void *deviceHandle);
#endif
/*!
* @brief Gets the device stack version function.
*
* The function is used to get the device stack version.
*
* @param[out] version The version structure pointer to keep the device stack version.
*
*/
extern void USB_DeviceGetVersion(uint32_t *version);
#if ((defined(USB_DEVICE_CONFIG_REMOTE_WAKEUP)) && (USB_DEVICE_CONFIG_REMOTE_WAKEUP > 0U))
/*!
* @brief Update the hardware tick.
*
* The function is used to update the hardware tick.
*
* @param[in] handle The device handle got from #USB_DeviceInit.
* @param[in] tick Current hardware tick(uint is ms).
*
*/
extern usb_status_t USB_DeviceUpdateHwTick(usb_device_handle handle, uint64_t tick);
#endif
/*! @}*/
#if defined(__cplusplus)
}
#endif /* __cplusplus*/
/*! @}*/
#endif /* __USB_DEVICE_H__ */