82 lines
4.6 KiB
Markdown
82 lines
4.6 KiB
Markdown
# STM32F411-Nucleo BSP Introduction
|
||
|
||
[中文](README_zh.md)
|
||
|
||
## MCU: STM32F411RE @100MHz, 512KB FLASH, 128KB RAM
|
||
|
||
The STM32F411xC/xE devices are based on the high-performance Arm® Cortex® -M4 32-bit RISC core operating at a frequency of up to 100 MHz. The Cortex®-M4 core features a Floating point unit (FPU) single precision which supports all Arm single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security.
|
||
|
||
The STM32F411xC/xE belongs to the STM32 Dynamic Efficiency™ product line (with products combining power efficiency, performance and integration) while adding a new innovative feature called Batch Acquisition Mode (BAM) allowing to save even more power consumption during data batching.
|
||
The STM32F411xC/xE incorporate high-speed embedded memories (up to 512 Kbytes of Flash memory, 128 Kbytes of SRAM), and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB bus and a 32-bit multi-AHB bus matrix.
|
||
All devices offer one 12-bit ADC, a low-power RTC, six general-purpose 16-bit timers including one PWM timer for motor control, two general-purpose 32-bit timers. They also feature standard and advanced communication interfaces.
|
||
The STM32F411xC/xE operate in the - 40 to + 125 °C temperature range from a 1.7 (PDR OFF) to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.
|
||
These features make the STM32F411xC/xE microcontrollers suitable for a wide range of applications.
|
||
|
||
#### KEY FEATURES
|
||
|
||
- Dynamic Efficiency Line with BAM (Batch Acquisition Mode)
|
||
- 1.7 V to 3.6 V power supply
|
||
- 40°C to 85/105/125 °C temperature range
|
||
- Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory, frequency up to 100 MHz, memory protection unit, 125 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions
|
||
- Memories
|
||
- Up to 512 Kbytes of Flash memory
|
||
- 128 Kbytes of SRAM
|
||
- Clock, reset and supply management
|
||
- 1.7 V to 3.6 V application supply and I/Os
|
||
- POR, PDR, PVD and BOR
|
||
- 4-to-26 MHz crystal oscillator
|
||
- Internal 16 MHz factory-trimmed RC
|
||
- 32 kHz oscillator for RTC with calibration
|
||
- Internal 32 kHz RC with calibration
|
||
- Power consumption
|
||
- Run: 100 μA/MHz (peripheral off)
|
||
- Stop (Flash in Stop mode, fast wakeup time): 42 μA Typ @ 25C; 65 μA max @25 °C
|
||
- Stop (Flash in Deep power down mode, slow wakeup time): down to 9 μA @ 25 °C; 28 μA max @25 °C
|
||
- Standby: 1.8 μA @25 °C / 1.7 V without RTC; 11 μA @85 °C @1.7 V
|
||
- VBAT supply for RTC: 1 μA @25 °C
|
||
- 1×12-bit, 2.4 MSPS A/D converter: up to 16 channels
|
||
- General-purpose DMA: 16-stream DMA controllers with FIFOs and burst support
|
||
- Up to 11 timers: up to six 16-bit, two 32-bit timers up to 100 MHz, each with up to four IC/OC/PWM or pulse counter and quadrature (incremental) encoder input, two watchdog timers (independent and window) and a SysTick timer
|
||
- Debug mode
|
||
- Serial wire debug (SWD) & JTAG interfaces
|
||
- Cortex®-M4 Embedded Trace Macrocell™
|
||
- Up to 81 I/O ports with interrupt capability
|
||
- Up to 78 fast I/Os up to 100 MHz
|
||
- Up to 77 5 V-tolerant I/Os
|
||
- Up to 13 communication interfaces
|
||
- Up to 3 x I2C interfaces (SMBus/PMBus)
|
||
- Up to 3 USARTs (2 x 12.5 Mbit/s, 1 x 6.25 Mbit/s), ISO 7816 interface, LIN, IrDA, modem control)
|
||
- Up to 5 SPI/I2Ss (up to 50 Mbit/s, SPI or I2S audio protocol), SPI2 and SPI3 with muxed full-duplex I2S to achieve audio class accuracy via internal audio PLL or external clock
|
||
- SDIO interface (SD/MMC/eMMC)
|
||
- Advanced connectivity: USB 2.0 full-speed device/host/OTG controller with on-chip PHY
|
||
- CRC calculation unit
|
||
- 96-bit unique ID
|
||
- RTC: subsecond accuracy, hardware calendar
|
||
- All packages (WLCSP49, LQFP64/100, UFQFPN48, UFBGA100) are ECOPACK®2
|
||
|
||
|
||
|
||
## Read more
|
||
|
||
| Documents | Description |
|
||
| :----------------------------------------------------------: | :----------------------------------------------------------: |
|
||
| [STM32_Nucleo-64_BSP_Introduction](../docs/STM32_Nucleo-64_BSP_Introduction.md) | How to run RT-Thread on STM32 Nucleo-64 boards (**Must-Read**) |
|
||
| [STM32F411RE ST Official Website](https://www.st.com/en/microcontrollers-microprocessors/stm32f411re.html#documentation) | STM32F411RE datasheet and other resources |
|
||
|
||
|
||
|
||
## Maintained By
|
||
|
||
[misonyo](https://github.com/misonyo)
|
||
|
||
misonyo@foxmail.com
|
||
|
||
|
||
|
||
## Translated By
|
||
|
||
Meco Man @ RT-Thread Community
|
||
|
||
> jiantingman@foxmail.com
|
||
>
|
||
> https://github.com/mysterywolf |