rt-thread-official/bsp/gd32450z-eval/Libraries/GD32F4xx_standard_peripheral/Source/gd32f4xx_tli.c

599 lines
24 KiB
C

/*!
\file gd32f4xx_tli.c
\brief TLI driver
\version 2016-08-15, V1.0.0, firmware for GD32F4xx
\version 2018-12-12, V2.0.0, firmware for GD32F4xx
\version 2020-09-30, V2.1.0, firmware for GD32F4xx
*/
/*
Copyright (c) 2020, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors
may be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
*/
#include "gd32f4xx_tli.h"
#define TLI_DEFAULT_VALUE 0x00000000U
#define TLI_OPAQUE_VALUE 0x000000FFU
/*!
\brief deinitialize TLI registers
\param[in] none
\param[out] none
\retval none
*/
void tli_deinit(void)
{
rcu_periph_reset_enable(RCU_TLIRST);
rcu_periph_reset_disable(RCU_TLIRST);
}
/*!
\brief initialize the parameters of TLI parameter structure with the default values, it is suggested
that call this function after a tli_parameter_struct structure is defined
\param[in] none
\param[out] tli_struct: the data needed to initialize TLI
synpsz_vpsz: size of the vertical synchronous pulse
synpsz_hpsz: size of the horizontal synchronous pulse
backpsz_vbpsz: size of the vertical back porch plus synchronous pulse
backpsz_hbpsz: size of the horizontal back porch plus synchronous pulse
activesz_vasz: size of the vertical active area width plus back porch and synchronous pulse
activesz_hasz: size of the horizontal active area width plus back porch and synchronous pulse
totalsz_vtsz: vertical total size of the display, including active area, back porch, synchronous
totalsz_htsz: vorizontal total size of the display, including active area, back porch, synchronous
backcolor_red: background value red
backcolor_green: background value green
backcolor_blue: background value blue
signalpolarity_hs: TLI_HSYN_ACTLIVE_LOW,TLI_HSYN_ACTLIVE_HIGHT
signalpolarity_vs: TLI_VSYN_ACTLIVE_LOW,TLI_VSYN_ACTLIVE_HIGHT
signalpolarity_de: TLI_DE_ACTLIVE_LOW,TLI_DE_ACTLIVE_HIGHT
signalpolarity_pixelck: TLI_PIXEL_CLOCK_TLI,TLI_PIXEL_CLOCK_INVERTEDTLI
\retval none
*/
void tli_struct_para_init(tli_parameter_struct *tli_struct)
{
/* initialize the struct parameters with default values */
tli_struct->synpsz_vpsz = TLI_DEFAULT_VALUE;
tli_struct->synpsz_hpsz = TLI_DEFAULT_VALUE;
tli_struct->backpsz_vbpsz = TLI_DEFAULT_VALUE;
tli_struct->backpsz_hbpsz = TLI_DEFAULT_VALUE;
tli_struct->activesz_vasz = TLI_DEFAULT_VALUE;
tli_struct->activesz_hasz = TLI_DEFAULT_VALUE;
tli_struct->totalsz_vtsz = TLI_DEFAULT_VALUE;
tli_struct->totalsz_htsz = TLI_DEFAULT_VALUE;
tli_struct->backcolor_red = TLI_DEFAULT_VALUE;
tli_struct->backcolor_green = TLI_DEFAULT_VALUE;
tli_struct->backcolor_blue = TLI_DEFAULT_VALUE;
tli_struct->signalpolarity_hs = TLI_HSYN_ACTLIVE_LOW;
tli_struct->signalpolarity_vs = TLI_VSYN_ACTLIVE_LOW;
tli_struct->signalpolarity_de = TLI_DE_ACTLIVE_LOW;
tli_struct->signalpolarity_pixelck = TLI_PIXEL_CLOCK_TLI;
}
/*!
\brief initialize TLI display timing parameters
\param[in] tli_struct: the data needed to initialize TLI
synpsz_vpsz: size of the vertical synchronous pulse
synpsz_hpsz: size of the horizontal synchronous pulse
backpsz_vbpsz: size of the vertical back porch plus synchronous pulse
backpsz_hbpsz: size of the horizontal back porch plus synchronous pulse
activesz_vasz: size of the vertical active area width plus back porch and synchronous pulse
activesz_hasz: size of the horizontal active area width plus back porch and synchronous pulse
totalsz_vtsz: vertical total size of the display, including active area, back porch, synchronous
totalsz_htsz: vorizontal total size of the display, including active area, back porch, synchronous
backcolor_red: background value red
backcolor_green: background value green
backcolor_blue: background value blue
signalpolarity_hs: TLI_HSYN_ACTLIVE_LOW,TLI_HSYN_ACTLIVE_HIGHT
signalpolarity_vs: TLI_VSYN_ACTLIVE_LOW,TLI_VSYN_ACTLIVE_HIGHT
signalpolarity_de: TLI_DE_ACTLIVE_LOW,TLI_DE_ACTLIVE_HIGHT
signalpolarity_pixelck: TLI_PIXEL_CLOCK_TLI,TLI_PIXEL_CLOCK_INVERTEDTLI
\param[out] none
\retval none
*/
void tli_init(tli_parameter_struct *tli_struct)
{
/* synchronous pulse size configuration */
TLI_SPSZ &= ~(TLI_SPSZ_VPSZ|TLI_SPSZ_HPSZ);
TLI_SPSZ = (uint32_t)((uint32_t)tli_struct->synpsz_vpsz|((uint32_t)tli_struct->synpsz_hpsz<<16U));
/* back-porch size configuration */
TLI_BPSZ &= ~(TLI_BPSZ_VBPSZ|TLI_BPSZ_HBPSZ);
TLI_BPSZ = (uint32_t)((uint32_t)tli_struct->backpsz_vbpsz|((uint32_t)tli_struct->backpsz_hbpsz<<16U));
/* active size configuration */
TLI_ASZ &= ~(TLI_ASZ_VASZ|TLI_ASZ_HASZ);
TLI_ASZ = (tli_struct->activesz_vasz|(tli_struct->activesz_hasz<<16U));
/* total size configuration */
TLI_TSZ &= ~(TLI_TSZ_VTSZ|TLI_TSZ_HTSZ);
TLI_TSZ = (tli_struct->totalsz_vtsz|(tli_struct->totalsz_htsz<<16U));
/* background color configuration */
TLI_BGC &= ~(TLI_BGC_BVB|(TLI_BGC_BVG)|(TLI_BGC_BVR));
TLI_BGC = (tli_struct->backcolor_blue|(tli_struct->backcolor_green<<8U)|(tli_struct->backcolor_red<<16U));
TLI_CTL &= ~(TLI_CTL_HPPS|TLI_CTL_VPPS|TLI_CTL_DEPS|TLI_CTL_CLKPS);
TLI_CTL |= (tli_struct->signalpolarity_hs|tli_struct->signalpolarity_vs|\
tli_struct->signalpolarity_de|tli_struct->signalpolarity_pixelck);
}
/*!
\brief configure TLI dither function
\param[in] dither_stat
only one parameter can be selected which is shown as below:
\arg TLI_DITHER_ENABLE
\arg TLI_DITHER_DISABLE
\param[out] none
\retval none
*/
void tli_dither_config(uint8_t dither_stat)
{
if(TLI_DITHER_ENABLE == dither_stat){
TLI_CTL |= TLI_CTL_DFEN;
}else{
TLI_CTL &= ~(TLI_CTL_DFEN);
}
}
/*!
\brief enable TLI
\param[in] none
\param[out] none
\retval none
*/
void tli_enable(void)
{
TLI_CTL |= TLI_CTL_TLIEN;
}
/*!
\brief disable TLI
\param[in] none
\param[out] none
\retval none
*/
void tli_disable(void)
{
TLI_CTL &= ~(TLI_CTL_TLIEN);
}
/*!
\brief configure TLI reload mode
\param[in] reload_mod
only one parameter can be selected which is shown as below:
\arg TLI_FRAME_BLANK_RELOAD_EN
\arg TLI_REQUEST_RELOAD_EN
\param[out] none
\retval none
*/
void tli_reload_config(uint8_t reload_mod)
{
if(TLI_FRAME_BLANK_RELOAD_EN == reload_mod){
/* the layer configuration will be reloaded at frame blank */
TLI_RL |= TLI_RL_FBR;
}else{
/* the layer configuration will be reloaded after this bit sets */
TLI_RL |= TLI_RL_RQR;
}
}
/*!
\brief initialize the parameters of TLI layer structure with the default values, it is suggested
that call this function after a tli_layer_parameter_struct structure is defined
\param[in] none
\param[out] layer_struct: TLI Layer parameter struct
layer_window_rightpos: window right position
layer_window_leftpos: window left position
layer_window_bottompos: window bottom position
layer_window_toppos: window top position
layer_ppf: LAYER_PPF_ARGB8888,LAYER_PPF_RGB888,LAYER_PPF_RGB565,
LAYER_PPF_ARG1555,LAYER_PPF_ARGB4444,LAYER_PPF_L8,
LAYER_PPF_AL44,LAYER_PPF_AL88
layer_sa: specified alpha
layer_default_alpha: the default color alpha
layer_default_red: the default color red
layer_default_green: the default color green
layer_default_blue: the default color blue
layer_acf1: LAYER_ACF1_SA,LAYER_ACF1_PASA
layer_acf2: LAYER_ACF2_SA,LAYER_ACF2_PASA
layer_frame_bufaddr: frame buffer base address
layer_frame_buf_stride_offset: frame buffer stride offset
layer_frame_line_length: frame line length
layer_frame_total_line_number: frame total line number
\retval none
*/
void tli_layer_struct_para_init(tli_layer_parameter_struct *layer_struct)
{
/* initialize the struct parameters with default values */
layer_struct->layer_window_rightpos = TLI_DEFAULT_VALUE;
layer_struct->layer_window_leftpos = TLI_DEFAULT_VALUE;
layer_struct->layer_window_bottompos = TLI_DEFAULT_VALUE;
layer_struct->layer_window_toppos = TLI_DEFAULT_VALUE;
layer_struct->layer_ppf = LAYER_PPF_ARGB8888;
layer_struct->layer_sa = TLI_OPAQUE_VALUE;
layer_struct->layer_default_alpha = TLI_DEFAULT_VALUE;
layer_struct->layer_default_red = TLI_DEFAULT_VALUE;
layer_struct->layer_default_green = TLI_DEFAULT_VALUE;
layer_struct->layer_default_blue = TLI_DEFAULT_VALUE;
layer_struct->layer_acf1 = LAYER_ACF1_PASA;
layer_struct->layer_acf2 = LAYER_ACF2_PASA;
layer_struct->layer_frame_bufaddr = TLI_DEFAULT_VALUE;
layer_struct->layer_frame_buf_stride_offset = TLI_DEFAULT_VALUE;
layer_struct->layer_frame_line_length = TLI_DEFAULT_VALUE;
layer_struct->layer_frame_total_line_number = TLI_DEFAULT_VALUE;
}
/*!
\brief initialize TLI layer
\param[in] layerx: LAYERx(x=0,1)
\param[in] layer_struct: TLI Layer parameter struct
layer_window_rightpos: window right position
layer_window_leftpos: window left position
layer_window_bottompos: window bottom position
layer_window_toppos: window top position
layer_ppf: LAYER_PPF_ARGB8888,LAYER_PPF_RGB888,LAYER_PPF_RGB565,
LAYER_PPF_ARG1555,LAYER_PPF_ARGB4444,LAYER_PPF_L8,
LAYER_PPF_AL44,LAYER_PPF_AL88
layer_sa: specified alpha
layer_default_alpha: the default color alpha
layer_default_red: the default color red
layer_default_green: the default color green
layer_default_blue: the default color blue
layer_acf1: LAYER_ACF1_SA,LAYER_ACF1_PASA
layer_acf2: LAYER_ACF2_SA,LAYER_ACF2_PASA
layer_frame_bufaddr: frame buffer base address
layer_frame_buf_stride_offset: frame buffer stride offset
layer_frame_line_length: frame line length
layer_frame_total_line_number: frame total line number
\param[out] none
\retval none
*/
void tli_layer_init(uint32_t layerx,tli_layer_parameter_struct *layer_struct)
{
/* configure layer window horizontal position */
TLI_LxHPOS(layerx) &= ~(TLI_LxHPOS_WLP|(TLI_LxHPOS_WRP));
TLI_LxHPOS(layerx) = (uint32_t)((uint32_t)layer_struct->layer_window_leftpos|((uint32_t)layer_struct->layer_window_rightpos<<16U));
/* configure layer window vertical position */
TLI_LxVPOS(layerx) &= ~(TLI_LxVPOS_WTP|(TLI_LxVPOS_WBP));
TLI_LxVPOS(layerx) = (uint32_t)((uint32_t)layer_struct->layer_window_toppos|((uint32_t)layer_struct->layer_window_bottompos<<16U));
/* configure layer packeted pixel format */
TLI_LxPPF(layerx) &= ~(TLI_LxPPF_PPF);
TLI_LxPPF(layerx) = layer_struct->layer_ppf;
/* configure layer specified alpha */
TLI_LxSA(layerx) &= ~(TLI_LxSA_SA);
TLI_LxSA(layerx) = layer_struct->layer_sa;
/* configure layer default color */
TLI_LxDC(layerx) &= ~(TLI_LxDC_DCB|(TLI_LxDC_DCG)|(TLI_LxDC_DCR)|(TLI_LxDC_DCA));
TLI_LxDC(layerx) = (uint32_t)((uint32_t)layer_struct->layer_default_blue|((uint32_t)layer_struct->layer_default_green<<8U)
|((uint32_t)layer_struct->layer_default_red<<16U)
|((uint32_t)layer_struct->layer_default_alpha<<24U));
/* configure layer alpha calculation factors */
TLI_LxBLEND(layerx) &= ~(TLI_LxBLEND_ACF2|(TLI_LxBLEND_ACF1));
TLI_LxBLEND(layerx) = ((layer_struct->layer_acf2)|(layer_struct->layer_acf1));
/* configure layer frame buffer base address */
TLI_LxFBADDR(layerx) &= ~(TLI_LxFBADDR_FBADD);
TLI_LxFBADDR(layerx) = (layer_struct->layer_frame_bufaddr);
/* configure layer frame line length */
TLI_LxFLLEN(layerx) &= ~(TLI_LxFLLEN_FLL|(TLI_LxFLLEN_STDOFF));
TLI_LxFLLEN(layerx) = (uint32_t)((uint32_t)layer_struct->layer_frame_line_length|((uint32_t)layer_struct->layer_frame_buf_stride_offset<<16U));
/* configure layer frame total line number */
TLI_LxFTLN(layerx) &= ~(TLI_LxFTLN_FTLN);
TLI_LxFTLN(layerx) = (uint32_t)(layer_struct->layer_frame_total_line_number);
}
/*!
\brief reconfigure window position
\param[in] layerx: LAYERx(x=0,1)
\param[in] offset_x: new horizontal offset
\param[in] offset_y: new vertical offset
\param[out] none
\retval none
*/
void tli_layer_window_offset_modify(uint32_t layerx,uint16_t offset_x,uint16_t offset_y)
{
/* configure window start position */
uint32_t layer_ppf, line_num, hstart, vstart;
uint32_t line_length = 0U;
TLI_LxHPOS(layerx) &= ~(TLI_LxHPOS_WLP|(TLI_LxHPOS_WRP));
TLI_LxVPOS(layerx) &= ~(TLI_LxVPOS_WTP|(TLI_LxVPOS_WBP));
hstart = (uint32_t)offset_x+(((TLI_BPSZ & TLI_BPSZ_HBPSZ)>>16U)+1U);
vstart = (uint32_t)offset_y+((TLI_BPSZ & TLI_BPSZ_VBPSZ)+1U);
line_num = (TLI_LxFTLN(layerx) & TLI_LxFTLN_FTLN);
layer_ppf = (TLI_LxPPF(layerx) & TLI_LxPPF_PPF);
/* the bytes of a line equal TLI_LxFLLEN_FLL bits value minus 3 */
switch(layer_ppf){
case LAYER_PPF_ARGB8888:
/* each pixel includes 4bytes, when pixel format is ARGB8888 */
line_length = (((TLI_LxFLLEN(layerx) & TLI_LxFLLEN_FLL)-3U)/4U);
break;
case LAYER_PPF_RGB888:
/* each pixel includes 3bytes, when pixel format is RGB888 */
line_length = (((TLI_LxFLLEN(layerx) & TLI_LxFLLEN_FLL)-3U)/3U);
break;
case LAYER_PPF_RGB565:
case LAYER_PPF_ARGB1555:
case LAYER_PPF_ARGB4444:
case LAYER_PPF_AL88:
/* each pixel includes 2bytes, when pixel format is RGB565,ARG1555,ARGB4444 or AL88 */
line_length = (((TLI_LxFLLEN(layerx) & TLI_LxFLLEN_FLL)-3U)/2U);
break;
case LAYER_PPF_L8:
case LAYER_PPF_AL44:
/* each pixel includes 1byte, when pixel format is L8 or AL44 */
line_length = (((TLI_LxFLLEN(layerx) & TLI_LxFLLEN_FLL)-3U));
break;
default:
break;
}
/* reconfigure window position */
TLI_LxHPOS(layerx) = (hstart|((hstart+line_length-1U)<<16U));
TLI_LxVPOS(layerx) = (vstart|((vstart+line_num-1U)<<16U));
}
/*!
\brief initialize the parameters of TLI layer LUT structure with the default values, it is suggested
that call this function after a tli_layer_lut_parameter_struct structure is defined
\param[in] none
\param[out] lut_struct: TLI layer LUT parameter struct
layer_table_addr: look up table write address
layer_lut_channel_red: red channel of a LUT entry
layer_lut_channel_green: green channel of a LUT entry
layer_lut_channel_blue: blue channel of a LUT entry
\retval none
*/
void tli_lut_struct_para_init(tli_layer_lut_parameter_struct *lut_struct)
{
/* initialize the struct parameters with default values */
lut_struct->layer_table_addr = TLI_DEFAULT_VALUE;
lut_struct->layer_lut_channel_red = TLI_DEFAULT_VALUE;
lut_struct->layer_lut_channel_green = TLI_DEFAULT_VALUE;
lut_struct->layer_lut_channel_blue = TLI_DEFAULT_VALUE;
}
/*!
\brief initialize TLI layer LUT
\param[in] layerx: LAYERx(x=0,1)
\param[in] lut_struct: TLI layer LUT parameter struct
layer_table_addr: look up table write address
layer_lut_channel_red: red channel of a LUT entry
layer_lut_channel_green: green channel of a LUT entry
layer_lut_channel_blue: blue channel of a LUT entry
\param[out] none
\retval none
*/
void tli_lut_init(uint32_t layerx,tli_layer_lut_parameter_struct *lut_struct)
{
TLI_LxLUT(layerx) &= ~(TLI_LxLUT_TB|TLI_LxLUT_TG|TLI_LxLUT_TR|TLI_LxLUT_TADD);
TLI_LxLUT(layerx) = (uint32_t)(((uint32_t)lut_struct->layer_lut_channel_blue)|((uint32_t)lut_struct->layer_lut_channel_green<<8U)
|((uint32_t)lut_struct->layer_lut_channel_red<<16U
|((uint32_t)lut_struct->layer_table_addr<<24U)));
}
/*!
\brief initialize TLI layer color key
\param[in] layerx: LAYERx(x=0,1)
\param[in] redkey: color key red
\param[in] greenkey: color key green
\param[in] bluekey: color key blue
\param[out] none
\retval none
*/
void tli_color_key_init(uint32_t layerx,uint8_t redkey,uint8_t greenkey,uint8_t bluekey)
{
TLI_LxCKEY(layerx) = (((uint32_t)bluekey)|((uint32_t)greenkey<<8U)|((uint32_t)redkey<<16U));
}
/*!
\brief enable TLI layer
\param[in] layerx: LAYERx(x=0,1)
\param[out] none
\retval none
*/
void tli_layer_enable(uint32_t layerx)
{
TLI_LxCTL(layerx) |= TLI_LxCTL_LEN;
}
/*!
\brief disable TLI layer
\param[in] layerx: LAYERx(x=0,1)
\param[out] none
\retval none
*/
void tli_layer_disable(uint32_t layerx)
{
TLI_LxCTL(layerx) &= ~(TLI_LxCTL_LEN);
}
/*!
\brief enable TLI layer color keying
\param[in] layerx: LAYERx(x=0,1)
\param[out] none
\retval none
*/
void tli_color_key_enable(uint32_t layerx)
{
TLI_LxCTL(layerx) |= TLI_LxCTL_CKEYEN;
}
/*!
\brief disable TLI layer color keying
\param[in] layerx: LAYERx(x=0,1)
\param[out] none
\retval none
*/
void tli_color_key_disable(uint32_t layerx)
{
TLI_LxCTL(layerx) &= ~(TLI_LxCTL_CKEYEN);
}
/*!
\brief enable TLI layer LUT
\param[in] layerx: LAYERx(x=0,1)
\param[out] none
\retval none
*/
void tli_lut_enable(uint32_t layerx)
{
TLI_LxCTL(layerx) |= TLI_LxCTL_LUTEN;
}
/*!
\brief disable TLI layer LUT
\param[in] layerx: LAYERx(x=0,1)
\param[out] none
\retval none
*/
void tli_lut_disable(uint32_t layerx)
{
TLI_LxCTL(layerx) &= ~(TLI_LxCTL_LUTEN);
}
/*!
\brief set line mark value
\param[in] line_num: line number
\param[out] none
\retval none
*/
void tli_line_mark_set(uint16_t line_num)
{
TLI_LM &= ~(TLI_LM_LM);
TLI_LM = (uint32_t)line_num;
}
/*!
\brief get current displayed position
\param[in] none
\param[out] none
\retval position of current pixel
*/
uint32_t tli_current_pos_get(void)
{
return TLI_CPPOS;
}
/*!
\brief enable TLI interrupt
\param[in] int_flag: TLI interrupt flags
one or more parameters can be selected which are shown as below:
\arg TLI_INT_LM: line mark interrupt
\arg TLI_INT_FE: FIFO error interrupt
\arg TLI_INT_TE: transaction error interrupt
\arg TLI_INT_LCR: layer configuration reloaded interrupt
\param[out] none
\retval none
*/
void tli_interrupt_enable(uint32_t int_flag)
{
TLI_INTEN |= (int_flag);
}
/*!
\brief disable TLI interrupt
\param[in] int_flag: TLI interrupt flags
one or more parameters can be selected which are shown as below:
\arg TLI_INT_LM: line mark interrupt
\arg TLI_INT_FE: FIFO error interrupt
\arg TLI_INT_TE: transaction error interrupt
\arg TLI_INT_LCR: layer configuration reloaded interrupt
\param[out] none
\retval none
*/
void tli_interrupt_disable(uint32_t int_flag)
{
TLI_INTEN &= ~(int_flag);
}
/*!
\brief get TLI interrupt flag
\param[in] int_flag: TLI interrupt flags
one or more parameters can be selected which are shown as below:
\arg TLI_INT_FLAG_LM: line mark interrupt flag
\arg TLI_INT_FLAG_FE: FIFO error interrupt flag
\arg TLI_INT_FLAG_TE: transaction error interrupt flag
\arg TLI_INT_FLAG_LCR: layer configuration reloaded interrupt flag
\param[out] none
\retval FlagStatus: SET or RESET
*/
FlagStatus tli_interrupt_flag_get(uint32_t int_flag)
{
uint32_t state;
state = TLI_INTF;
if(state & int_flag){
state = TLI_INTEN;
if(state & int_flag){
return SET;
}
}
return RESET;
}
/*!
\brief clear TLI interrupt flag
\param[in] int_flag: TLI interrupt flags
one or more parameters can be selected which are shown as below:
\arg TLI_INT_FLAG_LM: line mark interrupt flag
\arg TLI_INT_FLAG_FE: FIFO error interrupt flag
\arg TLI_INT_FLAG_TE: transaction error interrupt flag
\arg TLI_INT_FLAG_LCR: layer configuration reloaded interrupt flag
\param[out] none
\retval none
*/
void tli_interrupt_flag_clear(uint32_t int_flag)
{
TLI_INTC |= (int_flag);
}
/*!
\brief get TLI flag or state in TLI_INTF register or TLI_STAT register
\param[in] flag: TLI flags or states
only one parameter can be selected which is shown as below:
\arg TLI_FLAG_VDE: current VDE state
\arg TLI_FLAG_HDE: current HDE state
\arg TLI_FLAG_VS: current VS status of the TLI
\arg TLI_FLAG_HS: current HS status of the TLI
\arg TLI_FLAG_LM: line mark interrupt flag
\arg TLI_FLAG_FE: FIFO error interrupt flag
\arg TLI_FLAG_TE: transaction error interrupt flag
\arg TLI_FLAG_LCR: layer configuration reloaded interrupt flag
\param[out] none
\retval FlagStatus: SET or RESET
*/
FlagStatus tli_flag_get(uint32_t flag)
{
uint32_t stat;
/* choose which register to get flag or state */
if(flag >> 31U){
stat = TLI_INTF;
}else{
stat = TLI_STAT;
}
if(flag & stat){
return SET;
}else{
return RESET;
}
}