293 lines
9.4 KiB
C
293 lines
9.4 KiB
C
//*****************************************************************************
|
|
//
|
|
// am_hal_mcuctrl.c
|
|
//! @file
|
|
//!
|
|
//! @brief Functions for interfacing with the MCUCTRL.
|
|
//!
|
|
//! @addtogroup mcuctrl2 MCU Control (MCUCTRL)
|
|
//! @ingroup apollo2hal
|
|
//! @{
|
|
//
|
|
//*****************************************************************************
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Copyright (c) 2017, Ambiq Micro
|
|
// All rights reserved.
|
|
//
|
|
// Redistribution and use in source and binary forms, with or without
|
|
// modification, are permitted provided that the following conditions are met:
|
|
//
|
|
// 1. Redistributions of source code must retain the above copyright notice,
|
|
// this list of conditions and the following disclaimer.
|
|
//
|
|
// 2. Redistributions in binary form must reproduce the above copyright
|
|
// notice, this list of conditions and the following disclaimer in the
|
|
// documentation and/or other materials provided with the distribution.
|
|
//
|
|
// 3. Neither the name of the copyright holder nor the names of its
|
|
// contributors may be used to endorse or promote products derived from this
|
|
// software without specific prior written permission.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
|
|
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
// POSSIBILITY OF SUCH DAMAGE.
|
|
//
|
|
// This is part of revision 1.2.11 of the AmbiqSuite Development Package.
|
|
//
|
|
//*****************************************************************************
|
|
|
|
#include <stdint.h>
|
|
#include <stdbool.h>
|
|
#include "am_mcu_apollo.h"
|
|
|
|
#define LDO_TRIM_REG_ADDR (0x50023004)
|
|
#define BUCK_TRIM_REG_ADDR (0x50023000)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Global Variables.
|
|
//
|
|
//*****************************************************************************
|
|
//
|
|
// Define the flash sizes from CHIP_INFO.
|
|
//
|
|
const uint32_t g_am_hal_mcuctrl_flash_size[16] =
|
|
{
|
|
16 * 1024, /* 0x0 0x00004000 16 KB */
|
|
32 * 1024, /* 0x1 0x00008000 32 KB */
|
|
64 * 1024, /* 0x2 0x00010000 64 KB */
|
|
128 * 1024, /* 0x3 0x00020000 128 KB */
|
|
256 * 1024, /* 0x4 0x00040000 256 KB */
|
|
512 * 1024, /* 0x5 0x00080000 512 KB */
|
|
1 * 1024 * 1024, /* 0x6 0x00100000 1 MB */
|
|
2 * 1024 * 1024, /* 0x7 0x00200000 2 MB */
|
|
4 * 1024 * 1024, /* 0x8 0x00400000 4 MB */
|
|
8 * 1024 * 1024, /* 0x9 0x00800000 8 MB */
|
|
16 * 1024 * 1024, /* 0xA 0x01000000 16 MB */
|
|
32 * 1024 * 1024, /* 0xB 0x02000000 32 MB */
|
|
64 * 1024 * 1024, /* 0xC 0x04000000 64 MB */
|
|
128 * 1024 * 1024, /* 0xD 0x08000000 128 MB */
|
|
256 * 1024 * 1024, /* 0xE 0x10000000 256 MB */
|
|
512 * 1024 * 1024 /* 0xF 0x20000000 512 MB */
|
|
};
|
|
|
|
//
|
|
// Define the SRAM sizes from CHIP_INFO.
|
|
// For Apollo2, the SRAM sizes are defined exactly the same as the flash sizes.
|
|
//
|
|
#define g_am_hal_mcuctrl_sram_size g_am_hal_mcuctrl_flash_size
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Gets all relevant device information.
|
|
//!
|
|
//! @param psDevice is a pointer to a structure that will be used to store all
|
|
//! device info.
|
|
//!
|
|
//! This function gets the device part number, chip IDs, and revision and
|
|
//! stores them in the passed structure.
|
|
//!
|
|
//! @return None
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_mcuctrl_device_info_get(am_hal_mcuctrl_device_t *psDevice)
|
|
{
|
|
//
|
|
// Read the Part Number.
|
|
//
|
|
psDevice->ui32ChipPN = AM_REG(MCUCTRL, CHIP_INFO);
|
|
|
|
//
|
|
// Read the Chip ID0.
|
|
//
|
|
psDevice->ui32ChipID0 = AM_REG(MCUCTRL, CHIPID0);
|
|
|
|
//
|
|
// Read the Chip ID1.
|
|
//
|
|
psDevice->ui32ChipID1 = AM_REG(MCUCTRL, CHIPID1);
|
|
|
|
//
|
|
// Read the Chip Revision.
|
|
//
|
|
psDevice->ui32ChipRev = AM_REG(MCUCTRL, CHIPREV);
|
|
|
|
//
|
|
// Read the Part Number.
|
|
//
|
|
psDevice->ui32ChipPN = AM_REG(MCUCTRL, CHIP_INFO);
|
|
|
|
//
|
|
// Read the Chip ID0.
|
|
//
|
|
psDevice->ui32ChipID0 = AM_REG(MCUCTRL, CHIPID0);
|
|
|
|
//
|
|
// Read the Chip ID1.
|
|
//
|
|
psDevice->ui32ChipID1 = AM_REG(MCUCTRL, CHIPID1);
|
|
|
|
//
|
|
// Read the Chip Revision.
|
|
//
|
|
psDevice->ui32ChipRev = AM_REG(MCUCTRL, CHIPREV);
|
|
|
|
//
|
|
// Read the Chip VENDOR ID.
|
|
//
|
|
psDevice->ui32VendorID = AM_REG(MCUCTRL, VENDORID);
|
|
|
|
//
|
|
// Qualified from Part Number.
|
|
//
|
|
psDevice->ui32Qualified =
|
|
(psDevice->ui32ChipPN & AM_HAL_MCUCTRL_CHIP_INFO_QUAL_M) >>
|
|
AM_HAL_MCUCTRL_CHIP_INFO_QUAL_S;
|
|
|
|
//
|
|
// Flash size from Part Number.
|
|
//
|
|
psDevice->ui32FlashSize =
|
|
g_am_hal_mcuctrl_flash_size[
|
|
(psDevice->ui32ChipPN & AM_HAL_MCUCTRL_CHIP_INFO_FLASH_SIZE_M) >>
|
|
AM_HAL_MCUCTRL_CHIP_INFO_FLASH_SIZE_S];
|
|
|
|
//
|
|
// SRAM size from Part Number.
|
|
//
|
|
psDevice->ui32SRAMSize =
|
|
g_am_hal_mcuctrl_flash_size[
|
|
(psDevice->ui32ChipPN & AM_HAL_MCUCTRL_CHIP_INFO_SRAM_SIZE_M) >>
|
|
AM_HAL_MCUCTRL_CHIP_INFO_SRAM_SIZE_S];
|
|
|
|
//
|
|
// Now, let's look at the JEDEC info.
|
|
// The full partnumber is 12 bits total, but is scattered across 2 registers.
|
|
// Bits [11:8] are 0xE.
|
|
// Bits [7:4] are 0xE for Apollo, 0xD for Apollo2.
|
|
// Bits [3:0] are defined differently for Apollo and Apollo2.
|
|
// For Apollo, the low nibble is 0x0.
|
|
// For Apollo2, the low nibble indicates flash and SRAM size.
|
|
//
|
|
psDevice->ui32JedecPN = (AM_BFR(JEDEC, PID0, PNL8) << 0);
|
|
psDevice->ui32JedecPN |= (AM_BFR(JEDEC, PID1, PNH4) << 8);
|
|
|
|
//
|
|
// JEPID is the JEP-106 Manufacturer ID Code, which is assigned to Ambiq as
|
|
// 0x1B, with parity bit is 0x9B. It is 8 bits located across 2 registers.
|
|
//
|
|
psDevice->ui32JedecJEPID = (AM_BFR(JEDEC, PID1, JEPIDL) << 0);
|
|
psDevice->ui32JedecJEPID |= (AM_BFR(JEDEC, PID2, JEPIDH) << 4);
|
|
|
|
//
|
|
// CHIPREV is 8 bits located across 2 registers.
|
|
//
|
|
psDevice->ui32JedecCHIPREV = (AM_BFR(JEDEC, PID2, CHIPREVH4) << 4);
|
|
psDevice->ui32JedecCHIPREV |= (AM_BFR(JEDEC, PID3, CHIPREVL4) << 0);
|
|
|
|
//
|
|
// Let's get the Coresight ID (32-bits across 4 registers)
|
|
// For Apollo and Apollo2, it's expected to be 0xB105100D.
|
|
//
|
|
psDevice->ui32JedecCID = (AM_BFR(JEDEC, CID3, CID) << 24);
|
|
psDevice->ui32JedecCID |= (AM_BFR(JEDEC, CID2, CID) << 16);
|
|
psDevice->ui32JedecCID |= (AM_BFR(JEDEC, CID1, CID) << 8);
|
|
psDevice->ui32JedecCID |= (AM_BFR(JEDEC, CID0, CID) << 0);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Enables the fault capture registers.
|
|
//!
|
|
//! This function enables the DCODEFAULTADDR and ICODEFAULTADDR registers.
|
|
//!
|
|
//! @return None
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_mcuctrl_fault_capture_enable(void)
|
|
{
|
|
//
|
|
// Enable the Fault Capture registers.
|
|
//
|
|
AM_BFW(MCUCTRL, FAULTCAPTUREEN, ENABLE, 1);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Disables the fault capture registers.
|
|
//!
|
|
//! This function disables the DCODEFAULTADDR and ICODEFAULTADDR registers.
|
|
//!
|
|
//! @return None
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_mcuctrl_fault_capture_disable(void)
|
|
{
|
|
//
|
|
// Disable the Fault Capture registers.
|
|
//
|
|
AM_BFW(MCUCTRL, FAULTCAPTUREEN, ENABLE, 0);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Gets the fault status and capture registers.
|
|
//!
|
|
//! @param psFault is a pointer to a structure that will be used to store all
|
|
//! fault info.
|
|
//!
|
|
//! This function gets the status of the ICODE, DCODE, and SYS bus faults and
|
|
//! the addresses associated with the fault.
|
|
//!
|
|
//! @return None
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_mcuctrl_fault_status(am_hal_mcuctrl_fault_t *psFault)
|
|
{
|
|
uint32_t ui32FaultStat;
|
|
|
|
//
|
|
// Read the Fault Status Register.
|
|
//
|
|
ui32FaultStat = AM_REG(MCUCTRL, FAULTSTATUS);
|
|
psFault->bICODE = (ui32FaultStat & AM_REG_MCUCTRL_FAULTSTATUS_ICODE_M);
|
|
psFault->bDCODE = (ui32FaultStat & AM_REG_MCUCTRL_FAULTSTATUS_DCODE_M);
|
|
psFault->bSYS = (ui32FaultStat & AM_REG_MCUCTRL_FAULTSTATUS_SYS_M);
|
|
|
|
//
|
|
// Read the DCODE fault capture address register.
|
|
//
|
|
psFault->ui32DCODE = AM_REG(MCUCTRL, DCODEFAULTADDR);
|
|
|
|
//
|
|
// Read the ICODE fault capture address register.
|
|
//
|
|
psFault->ui32ICODE |= AM_REG(MCUCTRL, ICODEFAULTADDR);
|
|
|
|
//
|
|
// Read the ICODE fault capture address register.
|
|
//
|
|
psFault->ui32SYS |= AM_REG(MCUCTRL, SYSFAULTADDR);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// End Doxygen group.
|
|
//! @}
|
|
//
|
|
//*****************************************************************************
|