rt-thread-official/bsp/renesas/ra6m3-hmi-board/board/rtduino/arduino_pinout
kurisaW 91aace98b6 [rtduino][renesas] fix the pwm channel config 2023-12-01 19:36:40 +08:00
..
README.md [bsp][rtduino] 新增HMI-Board对RTduino支持、HMI-Board支持C++特性、修复一些驱动问题 (#8205) 2023-11-01 06:07:46 +08:00
README_zh.md [bsp][rtduino] 新增HMI-Board对RTduino支持、HMI-Board支持C++特性、修复一些驱动问题 (#8205) 2023-11-01 06:07:46 +08:00
SConscript [bsp][rtduino] 新增HMI-Board对RTduino支持、HMI-Board支持C++特性、修复一些驱动问题 (#8205) 2023-11-01 06:07:46 +08:00
pins_arduino.c [rtduino][renesas] fix the pwm channel config 2023-12-01 19:36:40 +08:00
pins_arduino.h [bsp][rtduino] 新增HMI-Board对RTduino支持、HMI-Board支持C++特性、修复一些驱动问题 (#8205) 2023-11-01 06:07:46 +08:00
ra6m3-hmi-board-pinout-figure.jpg [bsp][rtduino] 新增HMI-Board对RTduino支持、HMI-Board支持C++特性、修复一些驱动问题 (#8205) 2023-11-01 06:07:46 +08:00

README.md

ra6m3-hmi-board Arduino Eco-compatibility Guide

中文 | English

1 RTduino - Arduino Eco-compatibility Layer for RT-Thread

The ra6m3-hmi-board development board has been fully adapted to the RTduino software package, which is an Arduino eco-compatibility layer for RT-Thread. Users can program this BSP in accordance with Arduino coding conventions and can utilize a wide range of libraries from the Arduino community, significantly enhancing the RT-Thread ecosystem. For more information, please refer to the RTduino software package documentation.

1.1 Enabling the Arduino Eco-compatibility Layer for this BSP

In the Env tool, enter the "menuconfig" command, or in the RT-Thread Studio IDE, select "RT-Thread Settings":

Hardware Drivers Config --->
    Onboard Peripheral Drivers --->
        [*] Compatible with Arduino Ecosystem (RTduino)

2 Arduino Pin Layout

For more information about pin layout, please see pins_arduino.c and pins_arduino.h.

ra6m3-hmi-board-pinout-figure

Arduino Pin Number STM32 Pin Number 5V Tolerance Remarks
0 (D0) P206 Yes Serial4-RX, managed by RT-Thread's UART device framework uart4 by default
1 (D1) P205 Yes Serial4-TX, managed by RT-Thread's UART device framework uart4 by default
2 (D2) P008 Yes
3 (D3) P506 Yes
4 (D4) P603 Yes
5 (D5) P604 Yes
6 (D6) P605 Yes
7 (D7) P208 Yes
8 (D8) P207 Yes
9 (D9) P009 Yes
10 (D10) P712 Yes PWM2-CH2, managed by RT-Thread's PWM device framework pwm2's channel2 by default
11 (D11) P512 Yes I2C2-SCL, managed by RT-Thread's I2C device framework i2c2 by default
12 (D12) P511 Yes I2C2-SDA, managed by RT-Thread's I2C device framework i2c2 by default
13 (D13) P204 Yes
14 (D14) P203 Yes
15 (D15) P202 Yes
16 (A0) P000 Yes ADC1-CH0-EXTVOL (external voltage), managed by RT-Thread's ADC device framework adc0's channel0 by default
17 (A1) P001 Yes ADC1-CH1-EXTVOL (external voltage), managed by RT-Thread's ADC device framework adc0's channel1 by default
18 (A2) P002 Yes ADC1-CH2-EXTVOL (external voltage), managed by RT-Thread's ADC device framework adc0's channel2 by default
19 (A3) P003 Yes ADC1-CH7-EXTVOL (external voltage), managed by RT-Thread's ADC device framework adc0's channel7 by default
20 (A4) P508 Yes ADC1-CH19-EXTVOL (external voltage), managed by RT-Thread's ADC device framework adc0's channel20 by default
21 (A5) P014 Yes ADC1-CH5-EXTVOL (external voltage), managed by RT-Thread's ADC device framework adc0's channel5 by default

Note: RTduino does not currently support MDK. It is recommended to use the GNU GCC toolchain for compilation.