rt-thread-official/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Include/usb_std.h

217 lines
15 KiB
C

/*!
\file usb_std.h
\brief USB 2.0 standard defines
\version 2014-12-26, V1.0.0, firmware for GD32F10x
\version 2017-06-20, V2.0.0, firmware for GD32F10x
\version 2018-07-31, V2.1.0, firmware for GD32F10x
*/
/*
Copyright (c) 2018, GigaDevice Semiconductor Inc.
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors
may be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
*/
#ifndef USB_STD_H
#define USB_STD_H
#include "usb_conf.h"
/* constants definitions */
#define USB_DEV_QUALIFIER_DESC_LEN 0x0AU /*!< USB device qualifier descriptor length */
#define USB_DEV_DESC_LEN 0x12U /*!< USB device descriptor length */
#define USB_CFG_DESC_LEN 0x09U /*!< USB device configuration descriptor length */
#define USB_IF_DESC_LEN 0x09U /*!< USB device interface descriptor length */
#define USB_EP_DESC_LEN 0x07U /*!< USB device endpoint descriptor length */
#define USB_OTG_DESC_LEN 0x03U /*!< USB device OTG descriptor length */
/* bit 7 of bmRequestType: data phase transfer direction */
#define USB_DIR_MASK 0x80U /*!< USB transfer direction mask */
#define USB_DIR_OUT 0x00U /*!< USB transfer out direction */
#define USB_DIR_IN 0x80U /*!< USB transfer in direction */
/* bit 6..5 of bmRequestType: request type */
#define USB_STANDARD_REQ 0x00U /*!< USB standard request */
#define USB_CLASS_REQ 0x20U /*!< USB class request */
#define USB_VENDOR_REQ 0x40U /*!< USB vebdor request */
#define USB_REQ_MASK 0x60U /*!< USB request mask */
/* bit 4..0 of bmRequestType: recipient type */
#define USB_REQTYPE_DEVICE 0x00U /*!< USB device request type */
#define USB_REQTYPE_INTERFACE 0x01U /*!< USB interface request type*/
#define USB_REQTYPE_ENDPOINT 0x02U /*!< USB endpoint request type*/
#define USB_REQTYPE_MASK 0x03U /*!< USB request type mask*/
/* bRequest value */
#define USBREQ_GET_STATUS 0x00U /*!< USB get status request*/
#define USBREQ_CLEAR_FEATURE 0x01U /*!< USB clear feature request*/
#define USBREQ_SET_FEATURE 0x03U /*!< USB set feature request*/
#define USBREQ_SET_ADDRESS 0x05U /*!< USB set address request*/
#define USBREQ_GET_DESCRIPTOR 0x06U /*!< USB get descriptor request*/
#define USBREQ_SET_DESCRIPTOR 0x07U /*!< USB set descriptor request*/
#define USBREQ_GET_CONFIGURATION 0x08U /*!< USB get configuration request*/
#define USBREQ_SET_CONFIGURATION 0x09U /*!< USB set configuration request*/
#define USBREQ_GET_INTERFACE 0x0AU /*!< USB get interface request*/
#define USBREQ_SET_INTERFACE 0x0BU /*!< USB set interface request*/
#define USBREQ_SYNCH_FRAME 0x0CU /*!< USB synchronize frame request*/
/* descriptor types of usb specifications */
#define USB_DESCTYPE_DEVICE 0x01U /*!< USB device descriptor type*/
#define USB_DESCTYPE_CONFIGURATION 0x02U /*!< USB configuration descriptor type*/
#define USB_DESCTYPE_STRING 0x03U /*!< USB string descriptor type*/
#define USB_DESCTYPE_INTERFACE 0x04U /*!< USB interface descriptor type*/
#define USB_DESCTYPE_ENDPOINT 0x05U /*!< USB endpoint descriptor type*/
#define USB_DESCTYPE_DEVICE_QUALIFIER 0x06U /*!< USB device qualtfier descriptor type*/
#define USB_DESCTYPE_OTHER_SPEED_CONFIGURATION 0x07U /*!< USB other speed configuration descriptor type*/
#define USB_DESCTYPE_INTERFACE_POWER 0x08U /*!< USB interface power descriptor type*/
#define USB_DESCTYPE_HID 0x21U /*!< USB HID descriptor type*/
#define USB_DESCTYPE_HID_REPORT 0x22U /*!< USB HID report descriptor type*/
#define USB_DEVDESC_SIZE 18U /*!< USB device descriptor size*/
#define USB_CFGDESC_SIZE 9U /*!< USB configure descriptor size*/
#define USB_INTDESC_SIZE 9U /*!< USB interface descriptor size*/
#define USB_EPDESC_SIZE 7U /*!< USB endpoint descriptor size*/
/* descriptor type and descriptor index */
/* use the following values when USB host need to get descriptor */
#define USB_DEVDESC ((USB_DESCTYPE_DEVICE << 8U) & 0xFF00U) /*!< USB device operation marco */
#define USB_CFGDESC ((USB_DESCTYPE_CONFIGURATION << 8U) & 0xFF00U) /*!< USB configuration operation marco */
#define USB_STRDESC ((USB_DESCTYPE_STRING << 8U) & 0xFF00U) /*!< USB string operation marco */
#define USB_INTDESC ((USB_DESCTYPE_INTERFACE << 8U) & 0xFF00U) /*!< USB interface operation marco */
#define USB_EPDESC ((USB_DESCTYPE_INTERFACE << 8U) & 0xFF00U) /*!< USB endpoint operation marco */
#define USB_DEVQUADESC ((USB_DESCTYPE_DEVICE_QUALIFIER << 8U) & 0xFF00U) /*!< USB device qualifier operation marco */
#define USB_OSPCFGDESC ((USB_DESCTYPE_OTHER_SPEED_CONFIGURATION << 8U) & 0xFF00U) /*!< USB other speed configuration operation marco */
#define USB_INTPWRDESC ((USB_DESCTYPE_INTERFACE_POWER << 8U) & 0xFF00U) /*!< USB interface power operation marco */
#define USB_HIDREPDESC ((USB_DESCTYPE_HID_REPORT << 8U) & 0xFF00U) /*!< USB HID report operation marco */
#define USB_HIDDESC ((USB_DESCTYPE_HID << 8U) & 0xFF00U) /*!< USB HID operation marco */
#define SWAPBYTE(addr) (((uint16_t)(*((uint8_t *)(addr)))) + \
(uint16_t)(((uint16_t)(*(((uint8_t *)(addr)) + 1U))) << 8U))
/* supported classes */
#define USB_MSC_CLASS 0x08U /*!< USB MSC class*/
#define USB_HID_CLASS 0x03U /*!< USB HID class*/
/* interface descriptor field values for hid boot protocol */
#define HID_BOOT_CODE 0x01U /*!< USB HID boot code*/
#define HID_KEYBRD_BOOT_CODE 0x01U /*!< USB HID keyboard boot code*/
#define HID_MOUSE_BOOT_CODE 0x02U /*!< USB HID mouse boot code*/
/* as per usb specs 9.2.6.4 :standard request with data request timeout: 5sec
standard request with no data stage timeout : 50ms */
#define DATA_STAGE_TIMEOUT 5000U /*!< USB data stage timeout*/
#define NODATA_STAGE_TIMEOUT 50U /*!< USB no data stage timeout*/
#define USBH_CFG_DESC_SET_SIZE (USB_CFGDESC_SIZE + USB_INTDESC_SIZE \
+ (USBH_MAX_EP_NUM * USB_EPDESC_SIZE)) /*!< USB host set configuration descriptor size */
#pragma pack(1)
typedef union
{
uint8_t data[8];
struct _setup_packet_struct
{
uint8_t bmRequestType; /*!< type of request */
uint8_t bRequest; /*!< request of setup packet */
uint16_t wValue; /*!< value of setup packet */
uint16_t wIndex; /*!< index of setup packet */
uint16_t wLength; /*!< length of setup packet */
} b;
}usb_setup_union;
typedef struct
{
uint8_t bLength; /*!< size of the descriptor */
uint8_t bDescriptorType; /*!< type of the descriptor */
} usb_descriptor_header_struct;
typedef struct
{
usb_descriptor_header_struct Header; /*!< descriptor header, including type and size */
uint16_t bcdUSB; /*!< BCD of the supported USB specification */
uint8_t bDeviceClass; /*!< USB device class */
uint8_t bDeviceSubClass; /*!< USB device subclass */
uint8_t bDeviceProtocol; /*!< USB device protocol */
uint8_t bMaxPacketSize0; /*!< size of the control (address 0) endpoint's bank in bytes */
uint16_t idVendor; /*!< vendor ID for the USB product */
uint16_t idProduct; /*!< unique product ID for the USB product */
uint16_t bcdDevice; /*!< product release (version) number */
uint8_t iManufacturer; /*!< string index for the manufacturer's name */
uint8_t iProduct; /*!< string index for the product name/details */
uint8_t iSerialNumber; /*!< string index for the product's globally unique hexadecimal serial number */
uint8_t bNumberConfigurations; /*!< total number of configurations supported by the device */
} usb_descriptor_device_struct;
typedef struct
{
usb_descriptor_header_struct Header; /*!< descriptor header, including type and size */
uint16_t wTotalLength; /*!< size of the configuration descriptor header,and all sub descriptors inside the configuration */
uint8_t bNumInterfaces; /*!< total number of interfaces in the configuration */
uint8_t bConfigurationValue; /*!< configuration index of the current configuration */
uint8_t iConfiguration; /*!< index of a string descriptor describing the configuration */
uint8_t bmAttributes; /*!< configuration attributes */
uint8_t bMaxPower; /*!< maximum power consumption of the device while in the current configuration */
} usb_descriptor_configuration_struct;
typedef struct
{
usb_descriptor_header_struct Header; /*!< descriptor header, including type and size */
uint8_t bInterfaceNumber; /*!< index of the interface in the current configuration */
uint8_t bAlternateSetting; /*!< alternate setting for the interface number */
uint8_t bNumEndpoints; /*!< total number of endpoints in the interface */
uint8_t bInterfaceClass; /*!< interface class ID */
uint8_t bInterfaceSubClass; /*!< interface subclass ID */
uint8_t bInterfaceProtocol; /*!< interface protocol ID */
uint8_t iInterface; /*!< index of the string descriptor describing the interface */
} usb_descriptor_interface_struct;
typedef struct
{
usb_descriptor_header_struct Header; /*!< descriptor header, including type and size. */
uint8_t bEndpointAddress; /*!< logical address of the endpoint */
uint8_t bmAttributes; /*!< endpoint attributes */
uint16_t wMaxPacketSize; /*!< size of the endpoint bank, in bytes */
uint8_t bInterval; /*!< polling interval in milliseconds for the endpoint if it is an interrupt or isochrnous type */
} usb_descriptor_endpoint_struct;
typedef struct
{
usb_descriptor_header_struct Header; /*!< descriptor header, including type and size. */
uint16_t wLANGID; /*!< LANGID code */
}usb_descriptor_language_id_struct;
#pragma pack()
#endif /* USB_STD_H */