libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity
rt-thread-official/bsp/nuvoton/libraries/m2354/StdDriver/inc/nu_usci_spi.h

421 lines
17 KiB
C
Raw Blame History

/****************************************************************************//**
* @file nu_usci_spi.h
* @version V3.00
* @brief M2354 series USCI_SPI driver header file
*
* @copyright SPDX-License-Identifier: Apache-2.0
* @copyright Copyright (C) 2020 Nuvoton Technology Corp. All rights reserved.
*****************************************************************************/
#ifndef __NU_USCI_SPI_H__
#define __NU_USCI_SPI_H__
#ifdef __cplusplus
extern "C"
{
#endif
/** @addtogroup Standard_Driver Standard Driver
@{
*/
/** @addtogroup USCI_SPI_Driver USCI_SPI Driver
@{
*/
/** @addtogroup USCI_SPI_EXPORTED_CONSTANTS USCI_SPI Exported Constants
@{
*/
#define USPI_MODE_0 (0x0UL << USPI_PROTCTL_SCLKMODE_Pos) /*!< SCLK idle low; data transmit with falling edge and receive with rising edge */
#define USPI_MODE_1 (0x1UL << USPI_PROTCTL_SCLKMODE_Pos) /*!< SCLK idle low; data transmit with rising edge and receive with falling edge */
#define USPI_MODE_2 (0x2UL << USPI_PROTCTL_SCLKMODE_Pos) /*!< SCLK idle high; data transmit with rising edge and receive with falling edge */
#define USPI_MODE_3 (0x3UL << USPI_PROTCTL_SCLKMODE_Pos) /*!< SCLK idle high; data transmit with falling edge and receive with rising edge */
#define USPI_SLAVE (USPI_PROTCTL_SLAVE_Msk) /*!< Set as slave */
#define USPI_MASTER (0x0UL) /*!< Set as master */
#define USPI_SS (USPI_PROTCTL_SS_Msk) /*!< Set SS */
#define USPI_SS_ACTIVE_HIGH (0x0UL) /*!< SS active high */
#define USPI_SS_ACTIVE_LOW (USPI_LINECTL_CTLOINV_Msk) /*!< SS active low */
/* USCI_SPI Interrupt Mask */
#define USPI_SSINACT_INT_MASK (0x001UL) /*!< Slave Slave Inactive interrupt mask */
#define USPI_SSACT_INT_MASK (0x002UL) /*!< Slave Slave Active interrupt mask */
#define USPI_SLVTO_INT_MASK (0x004UL) /*!< Slave Mode Time-out interrupt mask */
#define USPI_SLVBE_INT_MASK (0x008UL) /*!< Slave Mode Bit Count Error interrupt mask */
#define USPI_TXUDR_INT_MASK (0x010UL) /*!< Slave Transmit Under Run interrupt mask */
#define USPI_RXOV_INT_MASK (0x020UL) /*!< Receive Buffer Overrun interrupt mask */
#define USPI_TXST_INT_MASK (0x040UL) /*!< Transmit Start interrupt mask */
#define USPI_TXEND_INT_MASK (0x080UL) /*!< Transmit End interrupt mask */
#define USPI_RXST_INT_MASK (0x100UL) /*!< Receive Start interrupt mask */
#define USPI_RXEND_INT_MASK (0x200UL) /*!< Receive End interrupt mask */
/* USCI_SPI Status Mask */
#define USPI_BUSY_MASK (0x01UL) /*!< Busy status mask */
#define USPI_RX_EMPTY_MASK (0x02UL) /*!< RX empty status mask */
#define USPI_RX_FULL_MASK (0x04UL) /*!< RX full status mask */
#define USPI_TX_EMPTY_MASK (0x08UL) /*!< TX empty status mask */
#define USPI_TX_FULL_MASK (0x10UL) /*!< TX full status mask */
#define USPI_SSLINE_STS_MASK (0x20UL) /*!< USCI_SPI_SS line status mask */
/**@}*/ /* end of group USCI_SPI_EXPORTED_CONSTANTS */
/** @addtogroup USCI_SPI_EXPORTED_FUNCTIONS USCI_SPI Exported Functions
@{
*/
/**
* @brief Disable slave 3-wire mode.
* @param[in] uspi The pointer of the specified USCI_SPI module.
* @return None
* \hideinitializer
*/
#define USPI_DISABLE_3WIRE_MODE(uspi) ( (uspi)->PROTCTL &= ~USPI_PROTCTL_SLV3WIRE_Msk )
/**
* @brief Enable slave 3-wire mode.
* @param[in] uspi The pointer of the specified USCI_SPI module.
* @return None
* \hideinitializer
*/
#define USPI_ENABLE_3WIRE_MODE(uspi) ( (uspi)->PROTCTL |= USPI_PROTCTL_SLV3WIRE_Msk )
/**
* @brief Get the Rx buffer empty flag.
* @param[in] uspi The pointer of the specified USCI_SPI module.
* @return Rx buffer flag
* @retval 0: Rx buffer is not empty
* @retval 1: Rx buffer is empty
* \hideinitializer
*/
#define USPI_GET_RX_EMPTY_FLAG(uspi) ( ((uspi)->BUFSTS & USPI_BUFSTS_RXEMPTY_Msk) == USPI_BUFSTS_RXEMPTY_Msk ? 1:0 )
/**
* @brief Get the Tx buffer empty flag.
* @param[in] uspi The pointer of the specified USCI_SPI module.
* @return Tx buffer flag
* @retval 0: Tx buffer is not empty
* @retval 1: Tx buffer is empty
* \hideinitializer
*/
#define USPI_GET_TX_EMPTY_FLAG(uspi) ( ((uspi)->BUFSTS & USPI_BUFSTS_TXEMPTY_Msk) == USPI_BUFSTS_TXEMPTY_Msk ? 1:0 )
/**
* @brief Get the Tx buffer full flag.
* @param[in] uspi The pointer of the specified USCI_SPI module.
* @return Tx buffer flag
* @retval 0: Tx buffer is not full
* @retval 1: Tx buffer is full
* \hideinitializer
*/
#define USPI_GET_TX_FULL_FLAG(uspi) ( ((uspi)->BUFSTS & USPI_BUFSTS_TXFULL_Msk) == USPI_BUFSTS_TXFULL_Msk ? 1:0 )
/**
* @brief Get the datum read from RX register.
* @param[in] uspi The pointer of the specified USCI_SPI module.
* @return data in Rx register
* \hideinitializer
*/
#define USPI_READ_RX(uspi) ( (uspi)->RXDAT )
/**
* @brief Write datum to TX register.
* @param[in] uspi The pointer of the specified USCI_SPI module.
* @param[in] u32TxData The datum which user attempt to transfer through USCI_SPI bus.
* @return None
* \hideinitializer
*/
#define USPI_WRITE_TX(uspi, u32TxData) ( (uspi)->TXDAT = (u32TxData) )
/**
* @brief Set USCI_SPI_SS pin to high state.
* @param[in] uspi The pointer of the specified USCI_SPI module.
* @return None.
* @details Disable automatic slave selection function and set USCI_SPI_SS pin to high state. Only available in Master mode.
* \hideinitializer
*/
#define USPI_SET_SS_HIGH(uspi) \
do{ \
(uspi)->LINECTL &= ~USPI_LINECTL_CTLOINV_Msk; \
(uspi)->PROTCTL = (((uspi)->PROTCTL & ~USPI_PROTCTL_AUTOSS_Msk) | USPI_PROTCTL_SS_Msk); \
}while(0)
/**
* @brief Set USCI_SPI_SS pin to low state.
* @param[in] uspi The pointer of the specified USCI_SPI module.
* @return None.
* @details Disable automatic slave selection function and set USCI_SPI_SS pin to low state. Only available in Master mode.
* \hideinitializer
*/
#define USPI_SET_SS_LOW(uspi) \
do{ \
(uspi)->LINECTL |= USPI_LINECTL_CTLOINV_Msk; \
(uspi)->PROTCTL = (((uspi)->PROTCTL & ~USPI_PROTCTL_AUTOSS_Msk) | USPI_PROTCTL_SS_Msk); \
}while(0)
/**
* @brief Set the length of suspend interval.
* @param[in] uspi The pointer of the specified USCI_SPI module.
* @param[in] u32SuspCycle Decide the length of suspend interval.
* @return None
* \hideinitializer
*/
#define USPI_SET_SUSPEND_CYCLE(uspi, u32SuspCycle) ( (uspi)->PROTCTL = ((uspi)->PROTCTL & ~USPI_PROTCTL_SUSPITV_Msk) | ((u32SuspCycle) << USPI_PROTCTL_SUSPITV_Pos) )
/**
* @brief Set the USCI_SPI transfer sequence with LSB first.
* @param[in] uspi The pointer of the specified USCI_SPI module.
* @return None
* \hideinitializer
*/
#define USPI_SET_LSB_FIRST(uspi) ( (uspi)->LINECTL |= USPI_LINECTL_LSB_Msk )
/**
* @brief Set the USCI_SPI transfer sequence with MSB first.
* @param[in] uspi The pointer of the specified USCI_SPI module.
* @return None
* \hideinitializer
*/
#define USPI_SET_MSB_FIRST(uspi) ( (uspi)->LINECTL &= ~USPI_LINECTL_LSB_Msk )
/**
* @brief Set the data width of a USCI_SPI transaction.
* @param[in] uspi The pointer of the specified USCI_SPI module.
* @param[in] u32Width The data width
* @return None
* \hideinitializer
*/
#define USPI_SET_DATA_WIDTH(uspi, u32Width) \
do{ \
if((u32Width) == 16ul){ \
(uspi)->LINECTL = ((uspi)->LINECTL & ~USPI_LINECTL_DWIDTH_Msk) | (0 << USPI_LINECTL_DWIDTH_Pos); \
}else { \
(uspi)->LINECTL = ((uspi)->LINECTL & ~USPI_LINECTL_DWIDTH_Msk) | ((u32Width) << USPI_LINECTL_DWIDTH_Pos); \
} \
}while(0)
/**
* @brief Get the USCI_SPI busy state.
* @param[in] uspi The pointer of the specified USCI_SPI module.
* @return USCI_SPI busy status
* @retval 0: USCI_SPI module is not busy
* @retval 1: USCI_SPI module is busy
* \hideinitializer
*/
#define USPI_IS_BUSY(uspi) ( ((uspi)->PROTSTS & USPI_PROTSTS_BUSY_Msk) == USPI_PROTSTS_BUSY_Msk ? 1:0 )
/**
* @brief Get the USCI_SPI wakeup flag.
* @param[in] uspi The pointer of the specified USCI_SPI module.
* @return Wakeup status.
* @retval 0 Flag is not set.
* @retval 1 Flag is set.
* \hideinitializer
*/
#define USPI_GET_WAKEUP_FLAG(uspi) ( ((uspi)->WKSTS & USPI_WKSTS_WKF_Msk) == USPI_WKSTS_WKF_Msk ? 1:0 )
/**
* @brief Clear the USCI_SPI wakeup flag.
* @param[in] uspi The pointer of the specified USCI_SPI module.
* @return None
* \hideinitializer
*/
#define USPI_CLR_WAKEUP_FLAG(uspi) ( (uspi)->WKSTS |= USPI_WKSTS_WKF_Msk )
/**
* @brief Get protocol interrupt flag/status.
* @param[in] uspi The pointer of the specified USCI_SPI module.
* @return The interrupt flag/status of protocol status register.
* \hideinitializer
*/
#define USPI_GET_PROT_STATUS(uspi) ( (uspi)->PROTSTS )
/**
* @brief Clear specified protocol interrupt flag.
* @param[in] uspi The pointer of the specified USCI_SPI module.
* @param[in] u32IntTypeFlag Interrupt Type Flag, should be
* - \ref USPI_PROTSTS_SSACTIF_Msk
* - \ref USPI_PROTSTS_SSINAIF_Msk
* - \ref USPI_PROTSTS_SLVBEIF_Msk
* - \ref USPI_PROTSTS_SLVTOIF_Msk
* - \ref USPI_PROTSTS_RXENDIF_Msk
* - \ref USPI_PROTSTS_RXSTIF_Msk
* - \ref USPI_PROTSTS_TXENDIF_Msk
* - \ref USPI_PROTSTS_TXSTIF_Msk
* @return None
* \hideinitializer
*/
#define USPI_CLR_PROT_INT_FLAG(uspi, u32IntTypeFlag) ( (uspi)->PROTSTS = (u32IntTypeFlag) )
/**
* @brief Get buffer interrupt flag/status.
* @param[in] uspi The pointer of the specified USCI_SPI module.
* @return The interrupt flag/status of buffer status register.
* \hideinitializer
*/
#define USPI_GET_BUF_STATUS(uspi) ( (uspi)->BUFSTS )
/**
* @brief Clear specified buffer interrupt flag.
* @param[in] uspi The pointer of the specified USCI_SPI module.
* @param[in] u32IntTypeFlag Interrupt Type Flag, should be
* - \ref USPI_BUFSTS_TXUDRIF_Msk
* - \ref USPI_BUFSTS_RXOVIF_Msk
* @return None
* \hideinitializer
*/
#define USPI_CLR_BUF_INT_FLAG(uspi, u32IntTypeFlag) ( (uspi)->BUFSTS = (u32IntTypeFlag) )
/**
* @brief Enable specified protocol interrupt.
* @param[in] uspi The pointer of the specified USCI_SPI module.
* @param[in] u32IntSel Interrupt Type, should be
* - \ref USPI_PROTIEN_SLVBEIEN_Msk
* - \ref USPI_PROTIEN_SLVTOIEN_Msk
* - \ref USPI_PROTIEN_SSACTIEN_Msk
* - \ref USPI_PROTIEN_SSINAIEN_Msk
* @return None
* \hideinitializer
*/
#define USPI_ENABLE_PROT_INT(uspi, u32IntSel) ( (uspi)->PROTIEN |= (u32IntSel) )
/**
* @brief Disable specified protocol interrupt.
* @param[in] uspi The pointer of the specified USCI_SPI module.
* @param[in] u32IntSel Interrupt Type, should be
* - \ref USPI_PROTIEN_SLVBEIEN_Msk
* - \ref USPI_PROTIEN_SLVTOIEN_Msk
* - \ref USPI_PROTIEN_SSACTIEN_Msk
* - \ref USPI_PROTIEN_SSINAIEN_Msk
* @return None
* \hideinitializer
*/
#define USPI_DISABLE_PROT_INT(uspi, u32IntSel) ( (uspi)->PROTIEN &= ~ (u32IntSel) )
/**
* @brief Enable specified buffer interrupt.
* @param[in] uspi The pointer of the specified USCI_SPI module.
* @param[in] u32IntSel Interrupt Type, should be
* - \ref USPI_BUFCTL_RXOVIEN_Msk
* - \ref USPI_BUFCTL_TXUDRIEN_Msk
* @return None
* \hideinitializer
*/
#define USPI_ENABLE_BUF_INT(uspi, u32IntSel) ( (uspi)->BUFCTL |= (u32IntSel) )
/**
* @brief Disable specified buffer interrupt.
* @param[in] uspi The pointer of the specified USCI_SPI module.
* @param[in] u32IntSel Interrupt Type, should be
* - \ref USPI_BUFCTL_RXOVIEN_Msk
* - \ref USPI_BUFCTL_TXUDRIEN_Msk
* @return None
* \hideinitializer
*/
#define USPI_DISABLE_BUF_INT(uspi, u32IntSel) ( (uspi)->BUFCTL &= ~ (u32IntSel) )
/**
* @brief Enable specified transfer interrupt.
* @param[in] uspi The pointer of the specified USCI_SPI module.
* @param[in] u32IntSel Interrupt Type, should be
* - \ref USPI_INTEN_RXENDIEN_Msk
* - \ref USPI_INTEN_RXSTIEN_Msk
* - \ref USPI_INTEN_TXENDIEN_Msk
* - \ref USPI_INTEN_TXSTIEN_Msk
* @return None
* \hideinitializer
*/
#define USPI_ENABLE_TRANS_INT(uspi, u32IntSel) ( (uspi)->INTEN |= (u32IntSel) )
/**
* @brief Disable specified transfer interrupt.
* @param[in] uspi The pointer of the specified USCI_SPI module.
* @param[in] u32IntSel Interrupt Type, should be
* - \ref USPI_INTEN_RXENDIEN_Msk
* - \ref USPI_INTEN_RXSTIEN_Msk
* - \ref USPI_INTEN_TXENDIEN_Msk
* - \ref USPI_INTEN_TXSTIEN_Msk
* @return None
* \hideinitializer
*/
#define USPI_DISABLE_TRANS_INT(uspi, u32IntSel) ( (uspi)->INTEN &= ~ (u32IntSel) )
/**
* @brief Trigger RX PDMA function.
* @param[in] uspi The pointer of the specified USCI_SPI module.
* @return None.
* @details Set RXPDMAEN bit of USPI_PDMACTL register to enable RX PDMA transfer function.
*/
#define USPI_TRIGGER_RX_PDMA(uspi) ( (uspi)->PDMACTL |= USPI_PDMACTL_RXPDMAEN_Msk | USPI_PDMACTL_PDMAEN_Msk )
/**
* @brief Trigger TX PDMA function.
* @param[in] uspi The pointer of the specified USCI_SPI module.
* @return None.
* @details Set TXPDMAEN bit of USPI_PDMACTL register to enable TX PDMA transfer function.
*/
#define USPI_TRIGGER_TX_PDMA(uspi) ( (uspi)->PDMACTL |= USPI_PDMACTL_TXPDMAEN_Msk | USPI_PDMACTL_PDMAEN_Msk )
/**
* @brief Trigger TX and RX PDMA function.
* @param[in] uspi The pointer of the specified USCI_SPI module.
* @return None.
* @details Set TXPDMAEN bit and RXPDMAEN bit of USPI_PDMACTL register to enable TX and RX PDMA transfer function.
*/
#define USPI_TRIGGER_TX_RX_PDMA(uspi) ( (uspi)->PDMACTL |= USPI_PDMACTL_TXPDMAEN_Msk | USPI_PDMACTL_RXPDMAEN_Msk | USPI_PDMACTL_PDMAEN_Msk )
/**
* @brief Disable RX PDMA transfer.
* @param[in] uspi The pointer of the specified USCI_SPI module.
* @return None.
* @details Clear RXPDMAEN bit of USPI_PDMACTL register to disable RX PDMA transfer function.
*/
#define USPI_DISABLE_RX_PDMA(uspi) ( (uspi)->PDMACTL &= ~USPI_PDMACTL_RXPDMAEN_Msk )
/**
* @brief Disable TX PDMA transfer.
* @param[in] uspi The pointer of the specified USCI_SPI module.
* @return None.
* @details Clear TXPDMAEN bit of USPI_PDMACTL register to disable TX PDMA transfer function.
*/
#define USPI_DISABLE_TX_PDMA(uspi) ( (uspi)->PDMACTL &= ~USPI_PDMACTL_TXPDMAEN_Msk )
/**
* @brief Disable TX and RX PDMA transfer.
* @param[in] uspi The pointer of the specified USCI_SPI module.
* @return None.
* @details Clear TXPDMAEN bit and RXPDMAEN bit of USPI_PDMACTL register to disable TX and RX PDMA transfer function.
*/
#define USPI_DISABLE_TX_RX_PDMA(uspi) ( (uspi)->PDMACTL &= ~(USPI_PDMACTL_TXPDMAEN_Msk | USPI_PDMACTL_RXPDMAEN_Msk) )
uint32_t USPI_Open(USPI_T *uspi, uint32_t u32MasterSlave, uint32_t u32SPIMode, uint32_t u32DataWidth, uint32_t u32BusClock);
void USPI_Close(USPI_T *uspi);
void USPI_ClearRxBuf(USPI_T *uspi);
void USPI_ClearTxBuf(USPI_T *uspi);
void USPI_DisableAutoSS(USPI_T *uspi);
void USPI_EnableAutoSS(USPI_T *uspi, uint32_t u32SSPinMask, uint32_t u32ActiveLevel);
uint32_t USPI_SetBusClock(USPI_T *uspi, uint32_t u32BusClock);
uint32_t USPI_GetBusClock(USPI_T *uspi);
void USPI_EnableInt(USPI_T *uspi, uint32_t u32Mask);
void USPI_DisableInt(USPI_T *uspi, uint32_t u32Mask);
uint32_t USPI_GetIntFlag(USPI_T *uspi, uint32_t u32Mask);
void USPI_ClearIntFlag(USPI_T *uspi, uint32_t u32Mask);
uint32_t USPI_GetStatus(USPI_T *uspi, uint32_t u32Mask);
void USPI_EnableWakeup(USPI_T *uspi);
void USPI_DisableWakeup(USPI_T *uspi);
/**@}*/ /* end of group USCI_SPI_EXPORTED_FUNCTIONS */
/**@}*/ /* end of group USCI_SPI_Driver */
/**@}*/ /* end of group Standard_Driver */
#ifdef __cplusplus
}
#endif
#endif /* __NU_USCI_SPI_H__ */
View Git Blame Copy Permalink