362 lines
26 KiB
C
362 lines
26 KiB
C
/***********************************************************************************************************************
|
|
* Copyright [2020-2021] Renesas Electronics Corporation and/or its affiliates. All Rights Reserved.
|
|
*
|
|
* This software and documentation are supplied by Renesas Electronics America Inc. and may only be used with products
|
|
* of Renesas Electronics Corp. and its affiliates ("Renesas"). No other uses are authorized. Renesas products are
|
|
* sold pursuant to Renesas terms and conditions of sale. Purchasers are solely responsible for the selection and use
|
|
* of Renesas products and Renesas assumes no liability. No license, express or implied, to any intellectual property
|
|
* right is granted by Renesas. This software is protected under all applicable laws, including copyright laws. Renesas
|
|
* reserves the right to change or discontinue this software and/or this documentation. THE SOFTWARE AND DOCUMENTATION
|
|
* IS DELIVERED TO YOU "AS IS," AND RENESAS MAKES NO REPRESENTATIONS OR WARRANTIES, AND TO THE FULLEST EXTENT
|
|
* PERMISSIBLE UNDER APPLICABLE LAW, DISCLAIMS ALL WARRANTIES, WHETHER EXPLICITLY OR IMPLICITLY, INCLUDING WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NONINFRINGEMENT, WITH RESPECT TO THE SOFTWARE OR
|
|
* DOCUMENTATION. RENESAS SHALL HAVE NO LIABILITY ARISING OUT OF ANY SECURITY VULNERABILITY OR BREACH. TO THE MAXIMUM
|
|
* EXTENT PERMITTED BY LAW, IN NO EVENT WILL RENESAS BE LIABLE TO YOU IN CONNECTION WITH THE SOFTWARE OR DOCUMENTATION
|
|
* (OR ANY PERSON OR ENTITY CLAIMING RIGHTS DERIVED FROM YOU) FOR ANY LOSS, DAMAGES, OR CLAIMS WHATSOEVER, INCLUDING,
|
|
* WITHOUT LIMITATION, ANY DIRECT, CONSEQUENTIAL, SPECIAL, INDIRECT, PUNITIVE, OR INCIDENTAL DAMAGES; ANY LOST PROFITS,
|
|
* OTHER ECONOMIC DAMAGE, PROPERTY DAMAGE, OR PERSONAL INJURY; AND EVEN IF RENESAS HAS BEEN ADVISED OF THE POSSIBILITY
|
|
* OF SUCH LOSS, DAMAGES, CLAIMS OR COSTS.
|
|
**********************************************************************************************************************/
|
|
|
|
#ifndef FSP_COMMON_API_H
|
|
#define FSP_COMMON_API_H
|
|
|
|
/***********************************************************************************************************************
|
|
* Includes
|
|
**********************************************************************************************************************/
|
|
#include <assert.h>
|
|
#include <stdint.h>
|
|
|
|
/* Includes FSP version macros. */
|
|
#include "fsp_version.h"
|
|
|
|
/*******************************************************************************************************************//**
|
|
* @ingroup RENESAS_COMMON
|
|
* @defgroup RENESAS_ERROR_CODES Common Error Codes
|
|
* All FSP modules share these common error codes.
|
|
* @{
|
|
**********************************************************************************************************************/
|
|
|
|
/**********************************************************************************************************************
|
|
* Macro definitions
|
|
**********************************************************************************************************************/
|
|
|
|
/** This macro is used to suppress compiler messages about a parameter not being used in a function. The nice thing
|
|
* about using this implementation is that it does not take any extra RAM or ROM. */
|
|
|
|
#define FSP_PARAMETER_NOT_USED(p) (void) ((p))
|
|
|
|
/** Determine if a C++ compiler is being used.
|
|
* If so, ensure that standard C is used to process the API information. */
|
|
#if defined(__cplusplus)
|
|
#define FSP_CPP_HEADER extern "C" {
|
|
#define FSP_CPP_FOOTER }
|
|
#else
|
|
#define FSP_CPP_HEADER
|
|
#define FSP_CPP_FOOTER
|
|
#endif
|
|
|
|
/** FSP Header and Footer definitions */
|
|
#define FSP_HEADER FSP_CPP_HEADER
|
|
#define FSP_FOOTER FSP_CPP_FOOTER
|
|
|
|
/** Macro to be used when argument to function is ignored since function call is NSC and the parameter is statically
|
|
* defined on the Secure side. */
|
|
#define FSP_SECURE_ARGUMENT (NULL)
|
|
|
|
/**********************************************************************************************************************
|
|
* Typedef definitions
|
|
**********************************************************************************************************************/
|
|
|
|
/** Common error codes */
|
|
typedef enum e_fsp_err
|
|
{
|
|
FSP_SUCCESS = 0,
|
|
|
|
FSP_ERR_ASSERTION = 1, ///< A critical assertion has failed
|
|
FSP_ERR_INVALID_POINTER = 2, ///< Pointer points to invalid memory location
|
|
FSP_ERR_INVALID_ARGUMENT = 3, ///< Invalid input parameter
|
|
FSP_ERR_INVALID_CHANNEL = 4, ///< Selected channel does not exist
|
|
FSP_ERR_INVALID_MODE = 5, ///< Unsupported or incorrect mode
|
|
FSP_ERR_UNSUPPORTED = 6, ///< Selected mode not supported by this API
|
|
FSP_ERR_NOT_OPEN = 7, ///< Requested channel is not configured or API not open
|
|
FSP_ERR_IN_USE = 8, ///< Channel/peripheral is running/busy
|
|
FSP_ERR_OUT_OF_MEMORY = 9, ///< Allocate more memory in the driver's cfg.h
|
|
FSP_ERR_HW_LOCKED = 10, ///< Hardware is locked
|
|
FSP_ERR_IRQ_BSP_DISABLED = 11, ///< IRQ not enabled in BSP
|
|
FSP_ERR_OVERFLOW = 12, ///< Hardware overflow
|
|
FSP_ERR_UNDERFLOW = 13, ///< Hardware underflow
|
|
FSP_ERR_ALREADY_OPEN = 14, ///< Requested channel is already open in a different configuration
|
|
FSP_ERR_APPROXIMATION = 15, ///< Could not set value to exact result
|
|
FSP_ERR_CLAMPED = 16, ///< Value had to be limited for some reason
|
|
FSP_ERR_INVALID_RATE = 17, ///< Selected rate could not be met
|
|
FSP_ERR_ABORTED = 18, ///< An operation was aborted
|
|
FSP_ERR_NOT_ENABLED = 19, ///< Requested operation is not enabled
|
|
FSP_ERR_TIMEOUT = 20, ///< Timeout error
|
|
FSP_ERR_INVALID_BLOCKS = 21, ///< Invalid number of blocks supplied
|
|
FSP_ERR_INVALID_ADDRESS = 22, ///< Invalid address supplied
|
|
FSP_ERR_INVALID_SIZE = 23, ///< Invalid size/length supplied for operation
|
|
FSP_ERR_WRITE_FAILED = 24, ///< Write operation failed
|
|
FSP_ERR_ERASE_FAILED = 25, ///< Erase operation failed
|
|
FSP_ERR_INVALID_CALL = 26, ///< Invalid function call is made
|
|
FSP_ERR_INVALID_HW_CONDITION = 27, ///< Detected hardware is in invalid condition
|
|
FSP_ERR_INVALID_FACTORY_FLASH = 28, ///< Factory flash is not available on this MCU
|
|
FSP_ERR_INVALID_STATE = 30, ///< API or command not valid in the current state
|
|
FSP_ERR_NOT_ERASED = 31, ///< Erase verification failed
|
|
FSP_ERR_SECTOR_RELEASE_FAILED = 32, ///< Sector release failed
|
|
FSP_ERR_NOT_INITIALIZED = 33, ///< Required initialization not complete
|
|
FSP_ERR_NOT_FOUND = 34, ///< The requested item could not be found
|
|
FSP_ERR_NO_CALLBACK_MEMORY = 35, ///< Non-secure callback memory not provided for non-secure callback
|
|
FSP_ERR_BUFFER_EMPTY = 36, ///< No data available in buffer
|
|
|
|
/* Start of RTOS only error codes */
|
|
FSP_ERR_INTERNAL = 100, ///< Internal error
|
|
FSP_ERR_WAIT_ABORTED = 101, ///< Wait aborted
|
|
|
|
/* Start of UART specific */
|
|
FSP_ERR_FRAMING = 200, ///< Framing error occurs
|
|
FSP_ERR_BREAK_DETECT = 201, ///< Break signal detects
|
|
FSP_ERR_PARITY = 202, ///< Parity error occurs
|
|
FSP_ERR_RXBUF_OVERFLOW = 203, ///< Receive queue overflow
|
|
FSP_ERR_QUEUE_UNAVAILABLE = 204, ///< Can't open s/w queue
|
|
FSP_ERR_INSUFFICIENT_SPACE = 205, ///< Not enough space in transmission circular buffer
|
|
FSP_ERR_INSUFFICIENT_DATA = 206, ///< Not enough data in receive circular buffer
|
|
|
|
/* Start of SPI specific */
|
|
FSP_ERR_TRANSFER_ABORTED = 300, ///< The data transfer was aborted.
|
|
FSP_ERR_MODE_FAULT = 301, ///< Mode fault error.
|
|
FSP_ERR_READ_OVERFLOW = 302, ///< Read overflow.
|
|
FSP_ERR_SPI_PARITY = 303, ///< Parity error.
|
|
FSP_ERR_OVERRUN = 304, ///< Overrun error.
|
|
|
|
/* Start of CGC Specific */
|
|
FSP_ERR_CLOCK_INACTIVE = 400, ///< Inactive clock specified as system clock.
|
|
FSP_ERR_CLOCK_ACTIVE = 401, ///< Active clock source cannot be modified without stopping first.
|
|
FSP_ERR_NOT_STABILIZED = 403, ///< Clock has not stabilized after its been turned on/off
|
|
FSP_ERR_PLL_SRC_INACTIVE = 404, ///< PLL initialization attempted when PLL source is turned off
|
|
FSP_ERR_OSC_STOP_DET_ENABLED = 405, ///< Illegal attempt to stop LOCO when Oscillation stop is enabled
|
|
FSP_ERR_OSC_STOP_DETECTED = 406, ///< The Oscillation stop detection status flag is set
|
|
FSP_ERR_OSC_STOP_CLOCK_ACTIVE = 407, ///< Attempt to clear Oscillation Stop Detect Status with PLL/MAIN_OSC active
|
|
FSP_ERR_CLKOUT_EXCEEDED = 408, ///< Output on target output clock pin exceeds maximum supported limit
|
|
FSP_ERR_USB_MODULE_ENABLED = 409, ///< USB clock configure request with USB Module enabled
|
|
FSP_ERR_HARDWARE_TIMEOUT = 410, ///< A register read or write timed out
|
|
FSP_ERR_LOW_VOLTAGE_MODE = 411, ///< Invalid clock setting attempted in low voltage mode
|
|
|
|
/* Start of FLASH Specific */
|
|
FSP_ERR_PE_FAILURE = 500, ///< Unable to enter Programming mode.
|
|
FSP_ERR_CMD_LOCKED = 501, ///< Peripheral in command locked state
|
|
FSP_ERR_FCLK = 502, ///< FCLK must be >= 4 MHz
|
|
FSP_ERR_INVALID_LINKED_ADDRESS = 503, ///< Function or data are linked at an invalid region of memory
|
|
FSP_ERR_BLANK_CHECK_FAILED = 504, ///< Blank check operation failed
|
|
|
|
/* Start of CAC Specific */
|
|
FSP_ERR_INVALID_CAC_REF_CLOCK = 600, ///< Measured clock rate < reference clock rate
|
|
|
|
/* Start of GLCD Specific */
|
|
FSP_ERR_CLOCK_GENERATION = 1000, ///< Clock cannot be specified as system clock
|
|
FSP_ERR_INVALID_TIMING_SETTING = 1001, ///< Invalid timing parameter
|
|
FSP_ERR_INVALID_LAYER_SETTING = 1002, ///< Invalid layer parameter
|
|
FSP_ERR_INVALID_ALIGNMENT = 1003, ///< Invalid memory alignment found
|
|
FSP_ERR_INVALID_GAMMA_SETTING = 1004, ///< Invalid gamma correction parameter
|
|
FSP_ERR_INVALID_LAYER_FORMAT = 1005, ///< Invalid color format in layer
|
|
FSP_ERR_INVALID_UPDATE_TIMING = 1006, ///< Invalid timing for register update
|
|
FSP_ERR_INVALID_CLUT_ACCESS = 1007, ///< Invalid access to CLUT entry
|
|
FSP_ERR_INVALID_FADE_SETTING = 1008, ///< Invalid fade-in/fade-out setting
|
|
FSP_ERR_INVALID_BRIGHTNESS_SETTING = 1009, ///< Invalid gamma correction parameter
|
|
|
|
/* Start of JPEG Specific */
|
|
FSP_ERR_JPEG_ERR = 1100, ///< JPEG error
|
|
FSP_ERR_JPEG_SOI_NOT_DETECTED = 1101, ///< SOI not detected until EOI detected.
|
|
FSP_ERR_JPEG_SOF1_TO_SOFF_DETECTED = 1102, ///< SOF1 to SOFF detected.
|
|
FSP_ERR_JPEG_UNSUPPORTED_PIXEL_FORMAT = 1103, ///< Unprovided pixel format detected.
|
|
FSP_ERR_JPEG_SOF_ACCURACY_ERROR = 1104, ///< SOF accuracy error: other than 8 detected.
|
|
FSP_ERR_JPEG_DQT_ACCURACY_ERROR = 1105, ///< DQT accuracy error: other than 0 detected.
|
|
FSP_ERR_JPEG_COMPONENT_ERROR1 = 1106, ///< Component error 1: the number of SOF0 header components detected is other than 1, 3, or 4.
|
|
FSP_ERR_JPEG_COMPONENT_ERROR2 = 1107, ///< Component error 2: the number of components differs between SOF0 header and SOS.
|
|
FSP_ERR_JPEG_SOF0_DQT_DHT_NOT_DETECTED = 1108, ///< SOF0, DQT, and DHT not detected when SOS detected.
|
|
FSP_ERR_JPEG_SOS_NOT_DETECTED = 1109, ///< SOS not detected: SOS not detected until EOI detected.
|
|
FSP_ERR_JPEG_EOI_NOT_DETECTED = 1110, ///< EOI not detected (default)
|
|
FSP_ERR_JPEG_RESTART_INTERVAL_DATA_NUMBER_ERROR = 1111, ///< Restart interval data number error detected.
|
|
FSP_ERR_JPEG_IMAGE_SIZE_ERROR = 1112, ///< Image size error detected.
|
|
FSP_ERR_JPEG_LAST_MCU_DATA_NUMBER_ERROR = 1113, ///< Last MCU data number error detected.
|
|
FSP_ERR_JPEG_BLOCK_DATA_NUMBER_ERROR = 1114, ///< Block data number error detected.
|
|
FSP_ERR_JPEG_BUFFERSIZE_NOT_ENOUGH = 1115, ///< User provided buffer size not enough
|
|
FSP_ERR_JPEG_UNSUPPORTED_IMAGE_SIZE = 1116, ///< JPEG Image size is not aligned with MCU
|
|
|
|
/* Start of touch panel framework specific */
|
|
FSP_ERR_CALIBRATE_FAILED = 1200, ///< Calibration failed
|
|
|
|
/* Start of IP specific */
|
|
FSP_ERR_IP_HARDWARE_NOT_PRESENT = 1400, ///< Requested IP does not exist on this device
|
|
FSP_ERR_IP_UNIT_NOT_PRESENT = 1401, ///< Requested unit does not exist on this device
|
|
FSP_ERR_IP_CHANNEL_NOT_PRESENT = 1402, ///< Requested channel does not exist on this device
|
|
|
|
/* Start of USB specific */
|
|
FSP_ERR_USB_FAILED = 1500,
|
|
FSP_ERR_USB_BUSY = 1501,
|
|
FSP_ERR_USB_SIZE_SHORT = 1502,
|
|
FSP_ERR_USB_SIZE_OVER = 1503,
|
|
FSP_ERR_USB_NOT_OPEN = 1504,
|
|
FSP_ERR_USB_NOT_SUSPEND = 1505,
|
|
FSP_ERR_USB_PARAMETER = 1506,
|
|
|
|
/* Start of Message framework specific */
|
|
FSP_ERR_NO_MORE_BUFFER = 2000, ///< No more buffer found in the memory block pool
|
|
FSP_ERR_ILLEGAL_BUFFER_ADDRESS = 2001, ///< Buffer address is out of block memory pool
|
|
FSP_ERR_INVALID_WORKBUFFER_SIZE = 2002, ///< Work buffer size is invalid
|
|
FSP_ERR_INVALID_MSG_BUFFER_SIZE = 2003, ///< Message buffer size is invalid
|
|
FSP_ERR_TOO_MANY_BUFFERS = 2004, ///< Number of buffer is too many
|
|
FSP_ERR_NO_SUBSCRIBER_FOUND = 2005, ///< No message subscriber found
|
|
FSP_ERR_MESSAGE_QUEUE_EMPTY = 2006, ///< No message found in the message queue
|
|
FSP_ERR_MESSAGE_QUEUE_FULL = 2007, ///< No room for new message in the message queue
|
|
FSP_ERR_ILLEGAL_SUBSCRIBER_LISTS = 2008, ///< Message subscriber lists is illegal
|
|
FSP_ERR_BUFFER_RELEASED = 2009, ///< Buffer has been released
|
|
|
|
/* Start of 2DG Driver specific */
|
|
FSP_ERR_D2D_ERROR_INIT = 3000, ///< D/AVE 2D has an error in the initialization
|
|
FSP_ERR_D2D_ERROR_DEINIT = 3001, ///< D/AVE 2D has an error in the initialization
|
|
FSP_ERR_D2D_ERROR_RENDERING = 3002, ///< D/AVE 2D has an error in the rendering
|
|
FSP_ERR_D2D_ERROR_SIZE = 3003, ///< D/AVE 2D has an error in the rendering
|
|
|
|
/* Start of ETHER Driver specific */
|
|
FSP_ERR_ETHER_ERROR_NO_DATA = 4000, ///< No Data in Receive buffer.
|
|
FSP_ERR_ETHER_ERROR_LINK = 4001, ///< ETHERC/EDMAC has an error in the Auto-negotiation
|
|
FSP_ERR_ETHER_ERROR_MAGIC_PACKET_MODE = 4002, ///< As a Magic Packet is being detected, and transmission/reception is not enabled
|
|
FSP_ERR_ETHER_ERROR_TRANSMIT_BUFFER_FULL = 4003, ///< Transmit buffer is not empty
|
|
FSP_ERR_ETHER_ERROR_FILTERING = 4004, ///< Detect multicast frame when multicast frame filtering enable
|
|
FSP_ERR_ETHER_ERROR_PHY_COMMUNICATION = 4005, ///< ETHERC/EDMAC has an error in the phy communication
|
|
FSP_ERR_ETHER_RECEIVE_BUFFER_ACTIVE = 4006, ///< Receive buffer is active.
|
|
|
|
/* Start of ETHER_PHY Driver specific */
|
|
FSP_ERR_ETHER_PHY_ERROR_LINK = 5000, ///< PHY is not link up.
|
|
FSP_ERR_ETHER_PHY_NOT_READY = 5001, ///< PHY has an error in the Auto-negotiation
|
|
|
|
/* Start of BYTEQ library specific */
|
|
FSP_ERR_QUEUE_FULL = 10000, ///< Queue is full, cannot queue another data
|
|
FSP_ERR_QUEUE_EMPTY = 10001, ///< Queue is empty, no data to dequeue
|
|
|
|
/* Start of CTSU Driver specific */
|
|
FSP_ERR_CTSU_SCANNING = 6000, ///< Scanning.
|
|
FSP_ERR_CTSU_NOT_GET_DATA = 6001, ///< Not processed previous scan data.
|
|
FSP_ERR_CTSU_INCOMPLETE_TUNING = 6002, ///< Incomplete initial offset tuning.
|
|
FSP_ERR_CTSU_DIAG_NOT_YET = 6003, ///< Diagnosis of data collected no yet.
|
|
FSP_ERR_CTSU_DIAG_LDO_OVER_VOLTAGE = 6004, ///< Diagnosis of LDO over voltage failed.
|
|
FSP_ERR_CTSU_DIAG_CCO_HIGH = 6005, ///< Diagnosis of CCO into 19.2uA failed.
|
|
FSP_ERR_CTSU_DIAG_CCO_LOW = 6006, ///< Diagnosis of CCO into 2.4uA failed.
|
|
FSP_ERR_CTSU_DIAG_SSCG = 6007, ///< Diagnosis of SSCG frequency failed.
|
|
FSP_ERR_CTSU_DIAG_DAC = 6008, ///< Diagnosis of non-touch count value failed.
|
|
FSP_ERR_CTSU_DIAG_OUTPUT_VOLTAGE = 6009, ///< Diagnosis of LDO output voltage failed.
|
|
FSP_ERR_CTSU_DIAG_OVER_VOLTAGE = 6010, ///< Diagnosis of over voltage detection circuit failed.
|
|
FSP_ERR_CTSU_DIAG_OVER_CURRENT = 6011, ///< Diagnosis of over current detection circuit failed.
|
|
FSP_ERR_CTSU_DIAG_LOAD_RESISTANCE = 6012, ///< Diagnosis of LDO internal resistance value failed.
|
|
FSP_ERR_CTSU_DIAG_CURRENT_SOURCE = 6013, ///< Diagnosis of Current source value failed.
|
|
FSP_ERR_CTSU_DIAG_SENSCLK_GAIN = 6014, ///< Diagnosis of SENSCLK frequency gain failed.
|
|
FSP_ERR_CTSU_DIAG_SUCLK_GAIN = 6015, ///< Diagnosis of SUCLK frequency gain failed.
|
|
FSP_ERR_CTSU_DIAG_CLOCK_RECOVERY = 6016, ///< Diagnosis of SUCLK clock recovery function failed.
|
|
FSP_ERR_CTSU_DIAG_CFC_GAIN = 6017, ///< Diagnosis of CFC oscillator gain failed.
|
|
|
|
/* Start of SDMMC specific */
|
|
FSP_ERR_CARD_INIT_FAILED = 40000, ///< SD card or eMMC device failed to initialize.
|
|
FSP_ERR_CARD_NOT_INSERTED = 40001, ///< SD card not installed.
|
|
FSP_ERR_DEVICE_BUSY = 40002, ///< Device is holding DAT0 low or another operation is ongoing.
|
|
FSP_ERR_CARD_NOT_INITIALIZED = 40004, ///< SD card was removed.
|
|
FSP_ERR_CARD_WRITE_PROTECTED = 40005, ///< Media is write protected.
|
|
FSP_ERR_TRANSFER_BUSY = 40006, ///< Transfer in progress.
|
|
FSP_ERR_RESPONSE = 40007, ///< Card did not respond or responded with an error.
|
|
|
|
/* Start of FX_IO specific */
|
|
FSP_ERR_MEDIA_FORMAT_FAILED = 50000, ///< Media format failed.
|
|
FSP_ERR_MEDIA_OPEN_FAILED = 50001, ///< Media open failed.
|
|
|
|
/* Start of CAN specific */
|
|
FSP_ERR_CAN_DATA_UNAVAILABLE = 60000, ///< No data available.
|
|
FSP_ERR_CAN_MODE_SWITCH_FAILED = 60001, ///< Switching operation modes failed.
|
|
FSP_ERR_CAN_INIT_FAILED = 60002, ///< Hardware initialization failed.
|
|
FSP_ERR_CAN_TRANSMIT_NOT_READY = 60003, ///< Transmit in progress.
|
|
FSP_ERR_CAN_RECEIVE_MAILBOX = 60004, ///< Mailbox is setup as a receive mailbox.
|
|
FSP_ERR_CAN_TRANSMIT_MAILBOX = 60005, ///< Mailbox is setup as a transmit mailbox.
|
|
FSP_ERR_CAN_MESSAGE_LOST = 60006, ///< Receive message has been overwritten or overrun.
|
|
|
|
/* Start of SF_WIFI Specific */
|
|
FSP_ERR_WIFI_CONFIG_FAILED = 70000, ///< WiFi module Configuration failed.
|
|
FSP_ERR_WIFI_INIT_FAILED = 70001, ///< WiFi module initialization failed.
|
|
FSP_ERR_WIFI_TRANSMIT_FAILED = 70002, ///< Transmission failed
|
|
FSP_ERR_WIFI_INVALID_MODE = 70003, ///< API called when provisioned in client mode
|
|
FSP_ERR_WIFI_FAILED = 70004, ///< WiFi Failed.
|
|
FSP_ERR_WIFI_SCAN_COMPLETE = 70005, ///< Wifi scan has completed.
|
|
|
|
/* Start of SF_CELLULAR Specific */
|
|
FSP_ERR_CELLULAR_CONFIG_FAILED = 80000, ///< Cellular module Configuration failed.
|
|
FSP_ERR_CELLULAR_INIT_FAILED = 80001, ///< Cellular module initialization failed.
|
|
FSP_ERR_CELLULAR_TRANSMIT_FAILED = 80002, ///< Transmission failed
|
|
FSP_ERR_CELLULAR_FW_UPTODATE = 80003, ///< Firmware is uptodate
|
|
FSP_ERR_CELLULAR_FW_UPGRADE_FAILED = 80004, ///< Firmware upgrade failed
|
|
FSP_ERR_CELLULAR_FAILED = 80005, ///< Cellular Failed.
|
|
FSP_ERR_CELLULAR_INVALID_STATE = 80006, ///< API Called in invalid state.
|
|
FSP_ERR_CELLULAR_REGISTRATION_FAILED = 80007, ///< Cellular Network registration failed
|
|
|
|
/* Start of SF_BLE specific */
|
|
FSP_ERR_BLE_FAILED = 90001, ///< BLE operation failed
|
|
FSP_ERR_BLE_INIT_FAILED = 90002, ///< BLE device initialization failed
|
|
FSP_ERR_BLE_CONFIG_FAILED = 90003, ///< BLE device configuration failed
|
|
FSP_ERR_BLE_PRF_ALREADY_ENABLED = 90004, ///< BLE device Profile already enabled
|
|
FSP_ERR_BLE_PRF_NOT_ENABLED = 90005, ///< BLE device not enabled
|
|
|
|
/* Start of SF_BLE_ABS specific */
|
|
FSP_ERR_BLE_ABS_INVALID_OPERATION = 91001, ///< Invalid operation is executed.
|
|
FSP_ERR_BLE_ABS_NOT_FOUND = 91002, ///< Valid data or free space is not found.
|
|
|
|
/* Start of Crypto specific (0x10000) @note Refer to sf_cryoto_err.h for Crypto error code. */
|
|
FSP_ERR_CRYPTO_CONTINUE = 0x10000, ///< Continue executing function
|
|
FSP_ERR_CRYPTO_SCE_RESOURCE_CONFLICT = 0x10001, ///< Hardware resource busy
|
|
FSP_ERR_CRYPTO_SCE_FAIL = 0x10002, ///< Internal I/O buffer is not empty
|
|
FSP_ERR_CRYPTO_SCE_HRK_INVALID_INDEX = 0x10003, ///< Invalid index
|
|
FSP_ERR_CRYPTO_SCE_RETRY = 0x10004, ///< Retry
|
|
FSP_ERR_CRYPTO_SCE_VERIFY_FAIL = 0x10005, ///< Verify is failed
|
|
FSP_ERR_CRYPTO_SCE_ALREADY_OPEN = 0x10006, ///< HW SCE module is already opened
|
|
FSP_ERR_CRYPTO_NOT_OPEN = 0x10007, ///< Hardware module is not initialized
|
|
FSP_ERR_CRYPTO_UNKNOWN = 0x10008, ///< Some unknown error occurred
|
|
FSP_ERR_CRYPTO_NULL_POINTER = 0x10009, ///< Null pointer input as a parameter
|
|
FSP_ERR_CRYPTO_NOT_IMPLEMENTED = 0x1000a, ///< Algorithm/size not implemented
|
|
FSP_ERR_CRYPTO_RNG_INVALID_PARAM = 0x1000b, ///< An invalid parameter is specified
|
|
FSP_ERR_CRYPTO_RNG_FATAL_ERROR = 0x1000c, ///< A fatal error occurred
|
|
FSP_ERR_CRYPTO_INVALID_SIZE = 0x1000d, ///< Size specified is invalid
|
|
FSP_ERR_CRYPTO_INVALID_STATE = 0x1000e, ///< Function used in an valid state
|
|
FSP_ERR_CRYPTO_ALREADY_OPEN = 0x1000f, ///< control block is already opened
|
|
FSP_ERR_CRYPTO_INSTALL_KEY_FAILED = 0x10010, ///< Specified input key is invalid.
|
|
FSP_ERR_CRYPTO_AUTHENTICATION_FAILED = 0x10011, ///< Authentication failed
|
|
FSP_ERR_CRYPTO_SCE_KEY_SET_FAIL = 0x10012, ///< Failure to Init Cipher
|
|
FSP_ERR_CRYPTO_SCE_AUTHENTICATION = 0x10013, ///< Authentication failed
|
|
FSP_ERR_CRYPTO_SCE_PARAMETER = 0x10014, ///< Input date is illegal.
|
|
FSP_ERR_CRYPTO_SCE_PROHIBIT_FUNCTION = 0x10015, ///< An invalid function call occurred.
|
|
|
|
/* Start of SF_CRYPTO specific */
|
|
FSP_ERR_CRYPTO_COMMON_NOT_OPENED = 0x20000, ///< Crypto Framework Common is not opened
|
|
FSP_ERR_CRYPTO_HAL_ERROR = 0x20001, ///< Cryoto HAL module returned an error
|
|
FSP_ERR_CRYPTO_KEY_BUF_NOT_ENOUGH = 0x20002, ///< Key buffer size is not enough to generate a key
|
|
FSP_ERR_CRYPTO_BUF_OVERFLOW = 0x20003, ///< Attempt to write data larger than what the buffer can hold
|
|
FSP_ERR_CRYPTO_INVALID_OPERATION_MODE = 0x20004, ///< Invalid operation mode.
|
|
FSP_ERR_MESSAGE_TOO_LONG = 0x20005, ///< Message for RSA encryption is too long.
|
|
FSP_ERR_RSA_DECRYPTION_ERROR = 0x20006, ///< RSA Decryption error.
|
|
|
|
/** @note SF_CRYPTO APIs may return an error code starting from 0x10000 which is of Crypto module.
|
|
* Refer to sf_cryoto_err.h for Crypto error codes.
|
|
*/
|
|
|
|
/* Start of Sensor specific */
|
|
FSP_ERR_SENSOR_INVALID_DATA = 0x30000, ///< Data is invalid.
|
|
FSP_ERR_SENSOR_IN_STABILIZATION = 0x30001, ///< Sensor is stabilizing.
|
|
FSP_ERR_SENSOR_MEASUREMENT_NOT_FINISHED = 0x30002, ///< Measurement is not finished.
|
|
|
|
/* Start of COMMS specific */
|
|
FSP_ERR_COMMS_BUS_NOT_OPEN = 0x40000, ///< Bus is not open.
|
|
} fsp_err_t;
|
|
|
|
/** @} */
|
|
|
|
/***********************************************************************************************************************
|
|
* Function prototypes
|
|
**********************************************************************************************************************/
|
|
|
|
#endif
|