666 lines
18 KiB
C
666 lines
18 KiB
C
/*
|
|
* Copyright (c) 2006-2023, RT-Thread Development Team
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2018-11-19 SummerGift first version
|
|
* 2018-12-25 zylx fix some bugs
|
|
* 2019-06-10 SummerGift optimize PHY state detection process
|
|
* 2019-09-03 xiaofan optimize link change detection process
|
|
*/
|
|
|
|
#include "drv_config.h"
|
|
#include "drv_eth.h"
|
|
#include <netif/ethernetif.h>
|
|
#include <lwipopts.h>
|
|
|
|
/*
|
|
* Emac driver uses CubeMX tool to generate emac and phy's configuration,
|
|
* the configuration files can be found in CubeMX_Config folder.
|
|
*/
|
|
|
|
/* debug option */
|
|
//#define ETH_RX_DUMP
|
|
//#define ETH_TX_DUMP
|
|
//#define DRV_DEBUG
|
|
#define LOG_TAG "drv.emac"
|
|
#include <drv_log.h>
|
|
|
|
#define MAX_ADDR_LEN 6
|
|
|
|
#undef PHY_FULL_DUPLEX
|
|
#define PHY_LINK (1 << 0)
|
|
#define PHY_100M (1 << 1)
|
|
#define PHY_FULL_DUPLEX (1 << 2)
|
|
|
|
struct rt_stm32_eth
|
|
{
|
|
/* inherit from ethernet device */
|
|
struct eth_device parent;
|
|
#ifndef PHY_USING_INTERRUPT_MODE
|
|
rt_timer_t poll_link_timer;
|
|
#endif
|
|
|
|
/* interface address info, hw address */
|
|
rt_uint8_t dev_addr[MAX_ADDR_LEN];
|
|
/* ETH_Speed */
|
|
rt_uint32_t ETH_Speed;
|
|
/* ETH_Duplex_Mode */
|
|
rt_uint32_t ETH_Mode;
|
|
};
|
|
|
|
static ETH_DMADescTypeDef *DMARxDscrTab, *DMATxDscrTab;
|
|
static rt_uint8_t *Rx_Buff, *Tx_Buff;
|
|
static ETH_HandleTypeDef EthHandle;
|
|
static struct rt_stm32_eth stm32_eth_device;
|
|
|
|
#if defined(ETH_RX_DUMP) || defined(ETH_TX_DUMP)
|
|
#define __is_print(ch) ((unsigned int)((ch) - ' ') < 127u - ' ')
|
|
static void dump_hex(const rt_uint8_t *ptr, rt_size_t buflen)
|
|
{
|
|
unsigned char *buf = (unsigned char *)ptr;
|
|
int i, j;
|
|
|
|
for (i = 0; i < buflen; i += 16)
|
|
{
|
|
rt_kprintf("%08X: ", i);
|
|
|
|
for (j = 0; j < 16; j++)
|
|
if (i + j < buflen)
|
|
rt_kprintf("%02X ", buf[i + j]);
|
|
else
|
|
rt_kprintf(" ");
|
|
rt_kprintf(" ");
|
|
|
|
for (j = 0; j < 16; j++)
|
|
if (i + j < buflen)
|
|
rt_kprintf("%c", __is_print(buf[i + j]) ? buf[i + j] : '.');
|
|
rt_kprintf("\n");
|
|
}
|
|
}
|
|
#endif
|
|
|
|
extern void phy_reset(void);
|
|
/* EMAC initialization function */
|
|
static rt_err_t rt_stm32_eth_init(rt_device_t dev)
|
|
{
|
|
__HAL_RCC_ETH_CLK_ENABLE();
|
|
|
|
phy_reset();
|
|
|
|
/* ETHERNET Configuration */
|
|
EthHandle.Instance = ETH;
|
|
EthHandle.Init.MACAddr = (rt_uint8_t *)&stm32_eth_device.dev_addr[0];
|
|
EthHandle.Init.AutoNegotiation = ETH_AUTONEGOTIATION_DISABLE;
|
|
EthHandle.Init.Speed = ETH_SPEED_100M;
|
|
EthHandle.Init.DuplexMode = ETH_MODE_FULLDUPLEX;
|
|
EthHandle.Init.MediaInterface = ETH_MEDIA_INTERFACE_RMII;
|
|
EthHandle.Init.RxMode = ETH_RXINTERRUPT_MODE;
|
|
#ifdef RT_LWIP_USING_HW_CHECKSUM
|
|
EthHandle.Init.ChecksumMode = ETH_CHECKSUM_BY_HARDWARE;
|
|
#else
|
|
EthHandle.Init.ChecksumMode = ETH_CHECKSUM_BY_SOFTWARE;
|
|
#endif
|
|
|
|
HAL_ETH_DeInit(&EthHandle);
|
|
|
|
/* configure ethernet peripheral (GPIOs, clocks, MAC, DMA) */
|
|
if (HAL_ETH_Init(&EthHandle) != HAL_OK)
|
|
{
|
|
LOG_E("eth hardware init failed");
|
|
}
|
|
else
|
|
{
|
|
LOG_D("eth hardware init success");
|
|
}
|
|
|
|
/* Initialize Tx Descriptors list: Chain Mode */
|
|
HAL_ETH_DMATxDescListInit(&EthHandle, DMATxDscrTab, Tx_Buff, ETH_TXBUFNB);
|
|
|
|
/* Initialize Rx Descriptors list: Chain Mode */
|
|
HAL_ETH_DMARxDescListInit(&EthHandle, DMARxDscrTab, Rx_Buff, ETH_RXBUFNB);
|
|
|
|
/* ETH interrupt Init */
|
|
HAL_NVIC_SetPriority(ETH_IRQn, 0x07, 0);
|
|
HAL_NVIC_EnableIRQ(ETH_IRQn);
|
|
|
|
/* Enable MAC and DMA transmission and reception */
|
|
if (HAL_ETH_Start(&EthHandle) == HAL_OK)
|
|
{
|
|
LOG_D("emac hardware start");
|
|
}
|
|
else
|
|
{
|
|
LOG_E("emac hardware start faild");
|
|
return -RT_ERROR;
|
|
}
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
static rt_err_t rt_stm32_eth_open(rt_device_t dev, rt_uint16_t oflag)
|
|
{
|
|
LOG_D("emac open");
|
|
return RT_EOK;
|
|
}
|
|
|
|
static rt_err_t rt_stm32_eth_close(rt_device_t dev)
|
|
{
|
|
LOG_D("emac close");
|
|
return RT_EOK;
|
|
}
|
|
|
|
static rt_ssize_t rt_stm32_eth_read(rt_device_t dev, rt_off_t pos, void *buffer, rt_size_t size)
|
|
{
|
|
LOG_D("emac read");
|
|
rt_set_errno(-RT_ENOSYS);
|
|
return 0;
|
|
}
|
|
|
|
static rt_ssize_t rt_stm32_eth_write(rt_device_t dev, rt_off_t pos, const void *buffer, rt_size_t size)
|
|
{
|
|
LOG_D("emac write");
|
|
rt_set_errno(-RT_ENOSYS);
|
|
return 0;
|
|
}
|
|
|
|
static rt_err_t rt_stm32_eth_control(rt_device_t dev, int cmd, void *args)
|
|
{
|
|
switch (cmd)
|
|
{
|
|
case NIOCTL_GADDR:
|
|
/* get mac address */
|
|
if (args)
|
|
{
|
|
SMEMCPY(args, stm32_eth_device.dev_addr, 6);
|
|
}
|
|
else
|
|
{
|
|
return -RT_ERROR;
|
|
}
|
|
break;
|
|
|
|
default :
|
|
break;
|
|
}
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
/* ethernet device interface */
|
|
/* transmit data*/
|
|
rt_err_t rt_stm32_eth_tx(rt_device_t dev, struct pbuf *p)
|
|
{
|
|
rt_err_t ret = -RT_ERROR;
|
|
HAL_StatusTypeDef state;
|
|
struct pbuf *q;
|
|
uint8_t *buffer = (uint8_t *)(EthHandle.TxDesc->Buffer1Addr);
|
|
__IO ETH_DMADescTypeDef *DmaTxDesc;
|
|
uint32_t framelength = 0;
|
|
uint32_t bufferoffset = 0;
|
|
uint32_t byteslefttocopy = 0;
|
|
uint32_t payloadoffset = 0;
|
|
|
|
DmaTxDesc = EthHandle.TxDesc;
|
|
bufferoffset = 0;
|
|
|
|
/* copy frame from pbufs to driver buffers */
|
|
for (q = p; q != NULL; q = q->next)
|
|
{
|
|
/* Is this buffer available? If not, goto error */
|
|
if ((DmaTxDesc->Status & ETH_DMATXDESC_OWN) != (uint32_t)RESET)
|
|
{
|
|
LOG_D("buffer not valid");
|
|
ret = ERR_USE;
|
|
goto error;
|
|
}
|
|
|
|
/* Get bytes in current lwIP buffer */
|
|
byteslefttocopy = q->len;
|
|
payloadoffset = 0;
|
|
|
|
/* Check if the length of data to copy is bigger than Tx buffer size*/
|
|
while ((byteslefttocopy + bufferoffset) > ETH_TX_BUF_SIZE)
|
|
{
|
|
/* Copy data to Tx buffer*/
|
|
SMEMCPY((uint8_t *)((uint8_t *)buffer + bufferoffset), (uint8_t *)((uint8_t *)q->payload + payloadoffset), (ETH_TX_BUF_SIZE - bufferoffset));
|
|
|
|
/* Point to next descriptor */
|
|
DmaTxDesc = (ETH_DMADescTypeDef *)(DmaTxDesc->Buffer2NextDescAddr);
|
|
|
|
/* Check if the buffer is available */
|
|
if ((DmaTxDesc->Status & ETH_DMATXDESC_OWN) != (uint32_t)RESET)
|
|
{
|
|
LOG_E("dma tx desc buffer is not valid");
|
|
ret = ERR_USE;
|
|
goto error;
|
|
}
|
|
|
|
buffer = (uint8_t *)(DmaTxDesc->Buffer1Addr);
|
|
|
|
byteslefttocopy = byteslefttocopy - (ETH_TX_BUF_SIZE - bufferoffset);
|
|
payloadoffset = payloadoffset + (ETH_TX_BUF_SIZE - bufferoffset);
|
|
framelength = framelength + (ETH_TX_BUF_SIZE - bufferoffset);
|
|
bufferoffset = 0;
|
|
}
|
|
|
|
/* Copy the remaining bytes */
|
|
SMEMCPY((uint8_t *)((uint8_t *)buffer + bufferoffset), (uint8_t *)((uint8_t *)q->payload + payloadoffset), byteslefttocopy);
|
|
bufferoffset = bufferoffset + byteslefttocopy;
|
|
framelength = framelength + byteslefttocopy;
|
|
}
|
|
|
|
#ifdef ETH_TX_DUMP
|
|
dump_hex(buffer, p->tot_len);
|
|
#endif
|
|
|
|
/* Prepare transmit descriptors to give to DMA */
|
|
/* TODO Optimize data send speed*/
|
|
LOG_D("transmit frame length :%d", framelength);
|
|
|
|
/* wait for unlocked */
|
|
while (EthHandle.Lock == HAL_LOCKED);
|
|
|
|
state = HAL_ETH_TransmitFrame(&EthHandle, framelength);
|
|
if (state != HAL_OK)
|
|
{
|
|
LOG_E("eth transmit frame faild: %d", state);
|
|
}
|
|
|
|
ret = ERR_OK;
|
|
|
|
error:
|
|
|
|
/* When Transmit Underflow flag is set, clear it and issue a Transmit Poll Demand to resume transmission */
|
|
if ((EthHandle.Instance->DMASR & ETH_DMASR_TUS) != (uint32_t)RESET)
|
|
{
|
|
/* Clear TUS ETHERNET DMA flag */
|
|
EthHandle.Instance->DMASR = ETH_DMASR_TUS;
|
|
|
|
/* Resume DMA transmission*/
|
|
EthHandle.Instance->DMATPDR = 0;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* receive data*/
|
|
struct pbuf *rt_stm32_eth_rx(rt_device_t dev)
|
|
{
|
|
|
|
struct pbuf *p = NULL;
|
|
struct pbuf *q = NULL;
|
|
HAL_StatusTypeDef state;
|
|
uint16_t len = 0;
|
|
uint8_t *buffer;
|
|
__IO ETH_DMADescTypeDef *dmarxdesc;
|
|
uint32_t bufferoffset = 0;
|
|
uint32_t payloadoffset = 0;
|
|
uint32_t byteslefttocopy = 0;
|
|
uint32_t i = 0;
|
|
|
|
/* Get received frame */
|
|
state = HAL_ETH_GetReceivedFrame_IT(&EthHandle);
|
|
if (state != HAL_OK)
|
|
{
|
|
LOG_D("receive frame faild");
|
|
return NULL;
|
|
}
|
|
|
|
/* Obtain the size of the packet and put it into the "len" variable. */
|
|
len = EthHandle.RxFrameInfos.length;
|
|
buffer = (uint8_t *)EthHandle.RxFrameInfos.buffer;
|
|
|
|
LOG_D("receive frame len : %d", len);
|
|
|
|
if (len > 0)
|
|
{
|
|
/* We allocate a pbuf chain of pbufs from the Lwip buffer pool */
|
|
p = pbuf_alloc(PBUF_RAW, len, PBUF_POOL);
|
|
}
|
|
|
|
#ifdef ETH_RX_DUMP
|
|
dump_hex(buffer, p->tot_len);
|
|
#endif
|
|
|
|
if (p != NULL)
|
|
{
|
|
dmarxdesc = EthHandle.RxFrameInfos.FSRxDesc;
|
|
bufferoffset = 0;
|
|
for (q = p; q != NULL; q = q->next)
|
|
{
|
|
byteslefttocopy = q->len;
|
|
payloadoffset = 0;
|
|
|
|
/* Check if the length of bytes to copy in current pbuf is bigger than Rx buffer size*/
|
|
while ((byteslefttocopy + bufferoffset) > ETH_RX_BUF_SIZE)
|
|
{
|
|
/* Copy data to pbuf */
|
|
SMEMCPY((uint8_t *)((uint8_t *)q->payload + payloadoffset), (uint8_t *)((uint8_t *)buffer + bufferoffset), (ETH_RX_BUF_SIZE - bufferoffset));
|
|
|
|
/* Point to next descriptor */
|
|
dmarxdesc = (ETH_DMADescTypeDef *)(dmarxdesc->Buffer2NextDescAddr);
|
|
buffer = (uint8_t *)(dmarxdesc->Buffer1Addr);
|
|
|
|
byteslefttocopy = byteslefttocopy - (ETH_RX_BUF_SIZE - bufferoffset);
|
|
payloadoffset = payloadoffset + (ETH_RX_BUF_SIZE - bufferoffset);
|
|
bufferoffset = 0;
|
|
}
|
|
/* Copy remaining data in pbuf */
|
|
SMEMCPY((uint8_t *)((uint8_t *)q->payload + payloadoffset), (uint8_t *)((uint8_t *)buffer + bufferoffset), byteslefttocopy);
|
|
bufferoffset = bufferoffset + byteslefttocopy;
|
|
}
|
|
}
|
|
|
|
/* Release descriptors to DMA */
|
|
/* Point to first descriptor */
|
|
dmarxdesc = EthHandle.RxFrameInfos.FSRxDesc;
|
|
/* Set Own bit in Rx descriptors: gives the buffers back to DMA */
|
|
for (i = 0; i < EthHandle.RxFrameInfos.SegCount; i++)
|
|
{
|
|
dmarxdesc->Status |= ETH_DMARXDESC_OWN;
|
|
dmarxdesc = (ETH_DMADescTypeDef *)(dmarxdesc->Buffer2NextDescAddr);
|
|
}
|
|
|
|
/* Clear Segment_Count */
|
|
EthHandle.RxFrameInfos.SegCount = 0;
|
|
|
|
/* When Rx Buffer unavailable flag is set: clear it and resume reception */
|
|
if ((EthHandle.Instance->DMASR & ETH_DMASR_RBUS) != (uint32_t)RESET)
|
|
{
|
|
/* Clear RBUS ETHERNET DMA flag */
|
|
EthHandle.Instance->DMASR = ETH_DMASR_RBUS;
|
|
/* Resume DMA reception */
|
|
EthHandle.Instance->DMARPDR = 0;
|
|
}
|
|
|
|
return p;
|
|
}
|
|
|
|
/* interrupt service routine */
|
|
void ETH_IRQHandler(void)
|
|
{
|
|
/* enter interrupt */
|
|
rt_interrupt_enter();
|
|
|
|
HAL_ETH_IRQHandler(&EthHandle);
|
|
|
|
/* leave interrupt */
|
|
rt_interrupt_leave();
|
|
}
|
|
|
|
void HAL_ETH_RxCpltCallback(ETH_HandleTypeDef *heth)
|
|
{
|
|
rt_err_t result;
|
|
result = eth_device_ready(&(stm32_eth_device.parent));
|
|
if (result != RT_EOK)
|
|
{
|
|
LOG_I("RxCpltCallback err = %d", result);
|
|
}
|
|
}
|
|
|
|
void HAL_ETH_ErrorCallback(ETH_HandleTypeDef *heth)
|
|
{
|
|
LOG_E("eth err");
|
|
}
|
|
|
|
static void phy_linkchange()
|
|
{
|
|
static rt_uint8_t phy_speed = 0;
|
|
rt_uint8_t phy_speed_new = 0;
|
|
rt_uint32_t status;
|
|
|
|
HAL_ETH_ReadPHYRegister(&EthHandle, PHY_BASIC_STATUS_REG, (uint32_t *)&status);
|
|
LOG_D("phy basic status reg is 0x%X", status);
|
|
|
|
if (status & (PHY_AUTONEGO_COMPLETE_MASK | PHY_LINKED_STATUS_MASK))
|
|
{
|
|
rt_uint32_t SR = 0;
|
|
|
|
phy_speed_new |= PHY_LINK;
|
|
|
|
HAL_ETH_ReadPHYRegister(&EthHandle, PHY_Status_REG, (uint32_t *)&SR);
|
|
LOG_D("phy control status reg is 0x%X", SR);
|
|
|
|
if (PHY_Status_SPEED_100M(SR))
|
|
{
|
|
phy_speed_new |= PHY_100M;
|
|
}
|
|
|
|
if (PHY_Status_FULL_DUPLEX(SR))
|
|
{
|
|
phy_speed_new |= PHY_FULL_DUPLEX;
|
|
}
|
|
}
|
|
|
|
if (phy_speed != phy_speed_new)
|
|
{
|
|
phy_speed = phy_speed_new;
|
|
if (phy_speed & PHY_LINK)
|
|
{
|
|
LOG_D("link up");
|
|
if (phy_speed & PHY_100M)
|
|
{
|
|
LOG_D("100Mbps");
|
|
stm32_eth_device.ETH_Speed = ETH_SPEED_100M;
|
|
}
|
|
else
|
|
{
|
|
stm32_eth_device.ETH_Speed = ETH_SPEED_10M;
|
|
LOG_D("10Mbps");
|
|
}
|
|
|
|
if (phy_speed & PHY_FULL_DUPLEX)
|
|
{
|
|
LOG_D("full-duplex");
|
|
stm32_eth_device.ETH_Mode = ETH_MODE_FULLDUPLEX;
|
|
}
|
|
else
|
|
{
|
|
LOG_D("half-duplex");
|
|
stm32_eth_device.ETH_Mode = ETH_MODE_HALFDUPLEX;
|
|
}
|
|
|
|
/* send link up. */
|
|
eth_device_linkchange(&stm32_eth_device.parent, RT_TRUE);
|
|
}
|
|
else
|
|
{
|
|
LOG_I("link down");
|
|
eth_device_linkchange(&stm32_eth_device.parent, RT_FALSE);
|
|
}
|
|
}
|
|
}
|
|
|
|
#ifdef PHY_USING_INTERRUPT_MODE
|
|
static void eth_phy_isr(void *args)
|
|
{
|
|
rt_uint32_t status = 0;
|
|
|
|
HAL_ETH_ReadPHYRegister(&EthHandle, PHY_INTERRUPT_FLAG_REG, (uint32_t *)&status);
|
|
LOG_D("phy interrupt status reg is 0x%X", status);
|
|
|
|
phy_linkchange();
|
|
}
|
|
#endif /* PHY_USING_INTERRUPT_MODE */
|
|
|
|
static void phy_monitor_thread_entry(void *parameter)
|
|
{
|
|
uint8_t phy_addr = 0xFF;
|
|
uint8_t detected_count = 0;
|
|
|
|
while(phy_addr == 0xFF)
|
|
{
|
|
/* phy search */
|
|
rt_uint32_t i, temp;
|
|
for (i = 0; i <= 0x1F; i++)
|
|
{
|
|
EthHandle.Init.PhyAddress = i;
|
|
HAL_ETH_ReadPHYRegister(&EthHandle, PHY_ID1_REG, (uint32_t *)&temp);
|
|
|
|
if (temp != 0xFFFF && temp != 0x00)
|
|
{
|
|
phy_addr = i;
|
|
break;
|
|
}
|
|
}
|
|
|
|
detected_count++;
|
|
rt_thread_mdelay(1000);
|
|
|
|
if (detected_count > 10)
|
|
{
|
|
LOG_E("No PHY device was detected, please check hardware!");
|
|
}
|
|
}
|
|
|
|
LOG_D("Found a phy, address:0x%02X", phy_addr);
|
|
|
|
/* RESET PHY */
|
|
LOG_D("RESET PHY!");
|
|
HAL_ETH_WritePHYRegister(&EthHandle, PHY_BASIC_CONTROL_REG, PHY_RESET_MASK);
|
|
rt_thread_mdelay(2000);
|
|
HAL_ETH_WritePHYRegister(&EthHandle, PHY_BASIC_CONTROL_REG, PHY_AUTO_NEGOTIATION_MASK);
|
|
|
|
phy_linkchange();
|
|
#ifdef PHY_USING_INTERRUPT_MODE
|
|
/* configuration intterrupt pin */
|
|
rt_pin_mode(PHY_INT_PIN, PIN_MODE_INPUT_PULLUP);
|
|
rt_pin_attach_irq(PHY_INT_PIN, PIN_IRQ_MODE_FALLING, eth_phy_isr, (void *)"callbackargs");
|
|
rt_pin_irq_enable(PHY_INT_PIN, PIN_IRQ_ENABLE);
|
|
|
|
/* enable phy interrupt */
|
|
HAL_ETH_WritePHYRegister(&EthHandle, PHY_INTERRUPT_MASK_REG, PHY_INT_MASK);
|
|
#if defined(PHY_INTERRUPT_CTRL_REG)
|
|
HAL_ETH_WritePHYRegister(&EthHandle, PHY_INTERRUPT_CTRL_REG, PHY_INTERRUPT_EN);
|
|
#endif
|
|
#else /* PHY_USING_INTERRUPT_MODE */
|
|
stm32_eth_device.poll_link_timer = rt_timer_create("phylnk", (void (*)(void*))phy_linkchange,
|
|
NULL, RT_TICK_PER_SECOND, RT_TIMER_FLAG_PERIODIC);
|
|
if (!stm32_eth_device.poll_link_timer || rt_timer_start(stm32_eth_device.poll_link_timer) != RT_EOK)
|
|
{
|
|
LOG_E("Start link change detection timer failed");
|
|
}
|
|
#endif /* PHY_USING_INTERRUPT_MODE */
|
|
}
|
|
|
|
/* Register the EMAC device */
|
|
static int rt_hw_stm32_eth_init(void)
|
|
{
|
|
rt_err_t state = RT_EOK;
|
|
|
|
/* Prepare receive and send buffers */
|
|
Rx_Buff = (rt_uint8_t *)rt_calloc(ETH_RXBUFNB, ETH_MAX_PACKET_SIZE);
|
|
if (Rx_Buff == RT_NULL)
|
|
{
|
|
LOG_E("No memory");
|
|
state = -RT_ENOMEM;
|
|
goto __exit;
|
|
}
|
|
|
|
Tx_Buff = (rt_uint8_t *)rt_calloc(ETH_TXBUFNB, ETH_MAX_PACKET_SIZE);
|
|
if (Tx_Buff == RT_NULL)
|
|
{
|
|
LOG_E("No memory");
|
|
state = -RT_ENOMEM;
|
|
goto __exit;
|
|
}
|
|
|
|
DMARxDscrTab = (ETH_DMADescTypeDef *)rt_calloc(ETH_RXBUFNB, sizeof(ETH_DMADescTypeDef));
|
|
if (DMARxDscrTab == RT_NULL)
|
|
{
|
|
LOG_E("No memory");
|
|
state = -RT_ENOMEM;
|
|
goto __exit;
|
|
}
|
|
|
|
DMATxDscrTab = (ETH_DMADescTypeDef *)rt_calloc(ETH_TXBUFNB, sizeof(ETH_DMADescTypeDef));
|
|
if (DMATxDscrTab == RT_NULL)
|
|
{
|
|
LOG_E("No memory");
|
|
state = -RT_ENOMEM;
|
|
goto __exit;
|
|
}
|
|
|
|
stm32_eth_device.ETH_Speed = ETH_SPEED_100M;
|
|
stm32_eth_device.ETH_Mode = ETH_MODE_FULLDUPLEX;
|
|
|
|
/* OUI 00-80-E1 STMICROELECTRONICS. */
|
|
stm32_eth_device.dev_addr[0] = 0x00;
|
|
stm32_eth_device.dev_addr[1] = 0x80;
|
|
stm32_eth_device.dev_addr[2] = 0xE1;
|
|
/* generate MAC addr from 96bit unique ID (only for test). */
|
|
stm32_eth_device.dev_addr[3] = *(rt_uint8_t *)(UID_BASE + 4);
|
|
stm32_eth_device.dev_addr[4] = *(rt_uint8_t *)(UID_BASE + 2);
|
|
stm32_eth_device.dev_addr[5] = *(rt_uint8_t *)(UID_BASE + 0);
|
|
|
|
stm32_eth_device.parent.parent.init = rt_stm32_eth_init;
|
|
stm32_eth_device.parent.parent.open = rt_stm32_eth_open;
|
|
stm32_eth_device.parent.parent.close = rt_stm32_eth_close;
|
|
stm32_eth_device.parent.parent.read = rt_stm32_eth_read;
|
|
stm32_eth_device.parent.parent.write = rt_stm32_eth_write;
|
|
stm32_eth_device.parent.parent.control = rt_stm32_eth_control;
|
|
stm32_eth_device.parent.parent.user_data = RT_NULL;
|
|
|
|
stm32_eth_device.parent.eth_rx = rt_stm32_eth_rx;
|
|
stm32_eth_device.parent.eth_tx = rt_stm32_eth_tx;
|
|
|
|
/* register eth device */
|
|
state = eth_device_init(&(stm32_eth_device.parent), "e0");
|
|
if (RT_EOK == state)
|
|
{
|
|
LOG_D("emac device init success");
|
|
}
|
|
else
|
|
{
|
|
LOG_E("emac device init faild: %d", state);
|
|
state = -RT_ERROR;
|
|
goto __exit;
|
|
}
|
|
|
|
/* start phy monitor */
|
|
rt_thread_t tid;
|
|
tid = rt_thread_create("phy",
|
|
phy_monitor_thread_entry,
|
|
RT_NULL,
|
|
1024,
|
|
RT_THREAD_PRIORITY_MAX - 2,
|
|
2);
|
|
if (tid != RT_NULL)
|
|
{
|
|
rt_thread_startup(tid);
|
|
}
|
|
else
|
|
{
|
|
state = -RT_ERROR;
|
|
}
|
|
__exit:
|
|
if (state != RT_EOK)
|
|
{
|
|
if (Rx_Buff)
|
|
{
|
|
rt_free(Rx_Buff);
|
|
}
|
|
|
|
if (Tx_Buff)
|
|
{
|
|
rt_free(Tx_Buff);
|
|
}
|
|
|
|
if (DMARxDscrTab)
|
|
{
|
|
rt_free(DMARxDscrTab);
|
|
}
|
|
|
|
if (DMATxDscrTab)
|
|
{
|
|
rt_free(DMATxDscrTab);
|
|
}
|
|
}
|
|
|
|
return state;
|
|
}
|
|
INIT_DEVICE_EXPORT(rt_hw_stm32_eth_init);
|