786 lines
43 KiB
C
786 lines
43 KiB
C
//*****************************************************************************
|
|
//
|
|
// hw_pwm.h - Defines and Macros for Pulse Width Modulation (PWM) ports.
|
|
//
|
|
// Copyright (c) 2005-2011 Texas Instruments Incorporated. All rights reserved.
|
|
// Software License Agreement
|
|
//
|
|
// Texas Instruments (TI) is supplying this software for use solely and
|
|
// exclusively on TI's microcontroller products. The software is owned by
|
|
// TI and/or its suppliers, and is protected under applicable copyright
|
|
// laws. You may not combine this software with "viral" open-source
|
|
// software in order to form a larger program.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
|
|
// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
|
|
// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
|
|
// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
|
|
// DAMAGES, FOR ANY REASON WHATSOEVER.
|
|
//
|
|
// This is part of revision 8264 of the Stellaris Firmware Development Package.
|
|
//
|
|
//*****************************************************************************
|
|
|
|
#ifndef __HW_PWM_H__
|
|
#define __HW_PWM_H__
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the PWM register offsets.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_O_CTL 0x00000000 // PWM Master Control
|
|
#define PWM_O_SYNC 0x00000004 // PWM Time Base Sync
|
|
#define PWM_O_ENABLE 0x00000008 // PWM Output Enable
|
|
#define PWM_O_INVERT 0x0000000C // PWM Output Inversion
|
|
#define PWM_O_FAULT 0x00000010 // PWM Output Fault
|
|
#define PWM_O_INTEN 0x00000014 // PWM Interrupt Enable
|
|
#define PWM_O_RIS 0x00000018 // PWM Raw Interrupt Status
|
|
#define PWM_O_ISC 0x0000001C // PWM Interrupt Status and Clear
|
|
#define PWM_O_STATUS 0x00000020 // PWM Status
|
|
#define PWM_O_FAULTVAL 0x00000024 // PWM Fault Condition Value
|
|
#define PWM_O_ENUPD 0x00000028 // PWM Enable Update
|
|
#define PWM_O_0_CTL 0x00000040 // PWM0 Control
|
|
#define PWM_O_0_INTEN 0x00000044 // PWM0 Interrupt and Trigger
|
|
// Enable
|
|
#define PWM_O_0_RIS 0x00000048 // PWM0 Raw Interrupt Status
|
|
#define PWM_O_0_ISC 0x0000004C // PWM0 Interrupt Status and Clear
|
|
#define PWM_O_0_LOAD 0x00000050 // PWM0 Load
|
|
#define PWM_O_0_COUNT 0x00000054 // PWM0 Counter
|
|
#define PWM_O_0_CMPA 0x00000058 // PWM0 Compare A
|
|
#define PWM_O_0_CMPB 0x0000005C // PWM0 Compare B
|
|
#define PWM_O_0_GENA 0x00000060 // PWM0 Generator A Control
|
|
#define PWM_O_0_GENB 0x00000064 // PWM0 Generator B Control
|
|
#define PWM_O_0_DBCTL 0x00000068 // PWM0 Dead-Band Control
|
|
#define PWM_O_0_DBRISE 0x0000006C // PWM0 Dead-Band Rising-Edge Delay
|
|
#define PWM_O_0_DBFALL 0x00000070 // PWM0 Dead-Band
|
|
// Falling-Edge-Delay
|
|
#define PWM_O_0_FLTSRC0 0x00000074 // PWM0 Fault Source 0
|
|
#define PWM_O_0_FLTSRC1 0x00000078 // PWM0 Fault Source 1
|
|
#define PWM_O_0_MINFLTPER 0x0000007C // PWM0 Minimum Fault Period
|
|
#define PWM_O_1_CTL 0x00000080 // PWM1 Control
|
|
#define PWM_O_1_INTEN 0x00000084 // PWM1 Interrupt and Trigger
|
|
// Enable
|
|
#define PWM_O_1_RIS 0x00000088 // PWM1 Raw Interrupt Status
|
|
#define PWM_O_1_ISC 0x0000008C // PWM1 Interrupt Status and Clear
|
|
#define PWM_O_1_LOAD 0x00000090 // PWM1 Load
|
|
#define PWM_O_1_COUNT 0x00000094 // PWM1 Counter
|
|
#define PWM_O_1_CMPA 0x00000098 // PWM1 Compare A
|
|
#define PWM_O_1_CMPB 0x0000009C // PWM1 Compare B
|
|
#define PWM_O_1_GENA 0x000000A0 // PWM1 Generator A Control
|
|
#define PWM_O_1_GENB 0x000000A4 // PWM1 Generator B Control
|
|
#define PWM_O_1_DBCTL 0x000000A8 // PWM1 Dead-Band Control
|
|
#define PWM_O_1_DBRISE 0x000000AC // PWM1 Dead-Band Rising-Edge Delay
|
|
#define PWM_O_1_DBFALL 0x000000B0 // PWM1 Dead-Band
|
|
// Falling-Edge-Delay
|
|
#define PWM_O_1_FLTSRC0 0x000000B4 // PWM1 Fault Source 0
|
|
#define PWM_O_1_FLTSRC1 0x000000B8 // PWM1 Fault Source 1
|
|
#define PWM_O_1_MINFLTPER 0x000000BC // PWM1 Minimum Fault Period
|
|
#define PWM_O_2_CTL 0x000000C0 // PWM2 Control
|
|
#define PWM_O_2_INTEN 0x000000C4 // PWM2 Interrupt and Trigger
|
|
// Enable
|
|
#define PWM_O_2_RIS 0x000000C8 // PWM2 Raw Interrupt Status
|
|
#define PWM_O_2_ISC 0x000000CC // PWM2 Interrupt Status and Clear
|
|
#define PWM_O_2_LOAD 0x000000D0 // PWM2 Load
|
|
#define PWM_O_2_COUNT 0x000000D4 // PWM2 Counter
|
|
#define PWM_O_2_CMPA 0x000000D8 // PWM2 Compare A
|
|
#define PWM_O_2_CMPB 0x000000DC // PWM2 Compare B
|
|
#define PWM_O_2_GENA 0x000000E0 // PWM2 Generator A Control
|
|
#define PWM_O_2_GENB 0x000000E4 // PWM2 Generator B Control
|
|
#define PWM_O_2_DBCTL 0x000000E8 // PWM2 Dead-Band Control
|
|
#define PWM_O_2_DBRISE 0x000000EC // PWM2 Dead-Band Rising-Edge Delay
|
|
#define PWM_O_2_DBFALL 0x000000F0 // PWM2 Dead-Band
|
|
// Falling-Edge-Delay
|
|
#define PWM_O_2_FLTSRC0 0x000000F4 // PWM2 Fault Source 0
|
|
#define PWM_O_2_FLTSRC1 0x000000F8 // PWM2 Fault Source 1
|
|
#define PWM_O_2_MINFLTPER 0x000000FC // PWM2 Minimum Fault Period
|
|
#define PWM_O_3_CTL 0x00000100 // PWM3 Control
|
|
#define PWM_O_3_INTEN 0x00000104 // PWM3 Interrupt and Trigger
|
|
// Enable
|
|
#define PWM_O_3_RIS 0x00000108 // PWM3 Raw Interrupt Status
|
|
#define PWM_O_3_ISC 0x0000010C // PWM3 Interrupt Status and Clear
|
|
#define PWM_O_3_LOAD 0x00000110 // PWM3 Load
|
|
#define PWM_O_3_COUNT 0x00000114 // PWM3 Counter
|
|
#define PWM_O_3_CMPA 0x00000118 // PWM3 Compare A
|
|
#define PWM_O_3_CMPB 0x0000011C // PWM3 Compare B
|
|
#define PWM_O_3_GENA 0x00000120 // PWM3 Generator A Control
|
|
#define PWM_O_3_GENB 0x00000124 // PWM3 Generator B Control
|
|
#define PWM_O_3_DBCTL 0x00000128 // PWM3 Dead-Band Control
|
|
#define PWM_O_3_DBRISE 0x0000012C // PWM3 Dead-Band Rising-Edge Delay
|
|
#define PWM_O_3_DBFALL 0x00000130 // PWM3 Dead-Band
|
|
// Falling-Edge-Delay
|
|
#define PWM_O_3_FLTSRC0 0x00000134 // PWM3 Fault Source 0
|
|
#define PWM_O_3_FLTSRC1 0x00000138 // PWM3 Fault Source 1
|
|
#define PWM_O_3_MINFLTPER 0x0000013C // PWM3 Minimum Fault Period
|
|
#define PWM_O_0_FLTSEN 0x00000800 // PWM0 Fault Pin Logic Sense
|
|
#define PWM_O_0_FLTSTAT0 0x00000804 // PWM0 Fault Status 0
|
|
#define PWM_O_0_FLTSTAT1 0x00000808 // PWM0 Fault Status 1
|
|
#define PWM_O_1_FLTSEN 0x00000880 // PWM1 Fault Pin Logic Sense
|
|
#define PWM_O_1_FLTSTAT0 0x00000884 // PWM1 Fault Status 0
|
|
#define PWM_O_1_FLTSTAT1 0x00000888 // PWM1 Fault Status 1
|
|
#define PWM_O_2_FLTSEN 0x00000900 // PWM2 Fault Pin Logic Sense
|
|
#define PWM_O_2_FLTSTAT0 0x00000904 // PWM2 Fault Status 0
|
|
#define PWM_O_2_FLTSTAT1 0x00000908 // PWM2 Fault Status 1
|
|
#define PWM_O_3_FLTSEN 0x00000980 // PWM3 Fault Pin Logic Sense
|
|
#define PWM_O_3_FLTSTAT0 0x00000984 // PWM3 Fault Status 0
|
|
#define PWM_O_3_FLTSTAT1 0x00000988 // PWM3 Fault Status 1
|
|
#define PWM_O_PP 0x00000FC0 // PWM Peripheral Properties
|
|
#define PWM_O_PC 0x00000FC4 // PWM Peripheral Configuration
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the PWM_O_CTL register.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_CTL_GLOBALSYNC3 0x00000008 // Update PWM Generator 3
|
|
#define PWM_CTL_GLOBALSYNC2 0x00000004 // Update PWM Generator 2
|
|
#define PWM_CTL_GLOBALSYNC1 0x00000002 // Update PWM Generator 1
|
|
#define PWM_CTL_GLOBALSYNC0 0x00000001 // Update PWM Generator 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the PWM_O_SYNC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_SYNC_SYNC3 0x00000008 // Reset Generator 3 Counter
|
|
#define PWM_SYNC_SYNC2 0x00000004 // Reset Generator 2 Counter
|
|
#define PWM_SYNC_SYNC1 0x00000002 // Reset Generator 1 Counter
|
|
#define PWM_SYNC_SYNC0 0x00000001 // Reset Generator 0 Counter
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the PWM_O_ENABLE register.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_ENABLE_PWM7EN 0x00000080 // PWM7 Output Enable
|
|
#define PWM_ENABLE_PWM6EN 0x00000040 // PWM6 Output Enable
|
|
#define PWM_ENABLE_PWM5EN 0x00000020 // PWM5 Output Enable
|
|
#define PWM_ENABLE_PWM4EN 0x00000010 // PWM4 Output Enable
|
|
#define PWM_ENABLE_PWM3EN 0x00000008 // PWM3 Output Enable
|
|
#define PWM_ENABLE_PWM2EN 0x00000004 // PWM2 Output Enable
|
|
#define PWM_ENABLE_PWM1EN 0x00000002 // PWM1 Output Enable
|
|
#define PWM_ENABLE_PWM0EN 0x00000001 // PWM0 Output Enable
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the PWM_O_INVERT register.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_INVERT_PWM7INV 0x00000080 // Invert PWM7 Signal
|
|
#define PWM_INVERT_PWM6INV 0x00000040 // Invert PWM6 Signal
|
|
#define PWM_INVERT_PWM5INV 0x00000020 // Invert PWM5 Signal
|
|
#define PWM_INVERT_PWM4INV 0x00000010 // Invert PWM4 Signal
|
|
#define PWM_INVERT_PWM3INV 0x00000008 // Invert PWM3 Signal
|
|
#define PWM_INVERT_PWM2INV 0x00000004 // Invert PWM2 Signal
|
|
#define PWM_INVERT_PWM1INV 0x00000002 // Invert PWM1 Signal
|
|
#define PWM_INVERT_PWM0INV 0x00000001 // Invert PWM0 Signal
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the PWM_O_FAULT register.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_FAULT_FAULT7 0x00000080 // PWM7 Fault
|
|
#define PWM_FAULT_FAULT6 0x00000040 // PWM6 Fault
|
|
#define PWM_FAULT_FAULT5 0x00000020 // PWM5 Fault
|
|
#define PWM_FAULT_FAULT4 0x00000010 // PWM4 Fault
|
|
#define PWM_FAULT_FAULT3 0x00000008 // PWM3 Fault
|
|
#define PWM_FAULT_FAULT2 0x00000004 // PWM2 Fault
|
|
#define PWM_FAULT_FAULT1 0x00000002 // PWM1 Fault
|
|
#define PWM_FAULT_FAULT0 0x00000001 // PWM0 Fault
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the PWM_O_INTEN register.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_INTEN_INTFAULT3 0x00080000 // Interrupt Fault 3
|
|
#define PWM_INTEN_INTFAULT2 0x00040000 // Interrupt Fault 2
|
|
#define PWM_INTEN_INTFAULT1 0x00020000 // Interrupt Fault 1
|
|
#define PWM_INTEN_INTFAULT 0x00010000 // Fault Interrupt Enable
|
|
#define PWM_INTEN_INTFAULT0 0x00010000 // Interrupt Fault 0
|
|
#define PWM_INTEN_INTPWM3 0x00000008 // PWM3 Interrupt Enable
|
|
#define PWM_INTEN_INTPWM2 0x00000004 // PWM2 Interrupt Enable
|
|
#define PWM_INTEN_INTPWM1 0x00000002 // PWM1 Interrupt Enable
|
|
#define PWM_INTEN_INTPWM0 0x00000001 // PWM0 Interrupt Enable
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the PWM_O_RIS register.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_RIS_INTFAULT3 0x00080000 // Interrupt Fault PWM 3
|
|
#define PWM_RIS_INTFAULT2 0x00040000 // Interrupt Fault PWM 2
|
|
#define PWM_RIS_INTFAULT1 0x00020000 // Interrupt Fault PWM 1
|
|
#define PWM_RIS_INTFAULT0 0x00010000 // Interrupt Fault PWM 0
|
|
#define PWM_RIS_INTFAULT 0x00010000 // Fault Interrupt Asserted
|
|
#define PWM_RIS_INTPWM3 0x00000008 // PWM3 Interrupt Asserted
|
|
#define PWM_RIS_INTPWM2 0x00000004 // PWM2 Interrupt Asserted
|
|
#define PWM_RIS_INTPWM1 0x00000002 // PWM1 Interrupt Asserted
|
|
#define PWM_RIS_INTPWM0 0x00000001 // PWM0 Interrupt Asserted
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the PWM_O_ISC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_ISC_INTFAULT3 0x00080000 // FAULT3 Interrupt Asserted
|
|
#define PWM_ISC_INTFAULT2 0x00040000 // FAULT2 Interrupt Asserted
|
|
#define PWM_ISC_INTFAULT1 0x00020000 // FAULT1 Interrupt Asserted
|
|
#define PWM_ISC_INTFAULT 0x00010000 // Fault Interrupt Asserted
|
|
#define PWM_ISC_INTFAULT0 0x00010000 // FAULT0 Interrupt Asserted
|
|
#define PWM_ISC_INTPWM3 0x00000008 // PWM3 Interrupt Status
|
|
#define PWM_ISC_INTPWM2 0x00000004 // PWM2 Interrupt Status
|
|
#define PWM_ISC_INTPWM1 0x00000002 // PWM1 Interrupt Status
|
|
#define PWM_ISC_INTPWM0 0x00000001 // PWM0 Interrupt Status
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the PWM_O_STATUS register.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_STATUS_FAULT3 0x00000008 // Generator 3 Fault Status
|
|
#define PWM_STATUS_FAULT2 0x00000004 // Generator 2 Fault Status
|
|
#define PWM_STATUS_FAULT1 0x00000002 // Generator 1 Fault Status
|
|
#define PWM_STATUS_FAULT0 0x00000001 // Generator 0 Fault Status
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the PWM_O_FAULTVAL register.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_FAULTVAL_PWM7 0x00000080 // PWM7 Fault Value
|
|
#define PWM_FAULTVAL_PWM6 0x00000040 // PWM6 Fault Value
|
|
#define PWM_FAULTVAL_PWM5 0x00000020 // PWM5 Fault Value
|
|
#define PWM_FAULTVAL_PWM4 0x00000010 // PWM4 Fault Value
|
|
#define PWM_FAULTVAL_PWM3 0x00000008 // PWM3 Fault Value
|
|
#define PWM_FAULTVAL_PWM2 0x00000004 // PWM2 Fault Value
|
|
#define PWM_FAULTVAL_PWM1 0x00000002 // PWM1 Fault Value
|
|
#define PWM_FAULTVAL_PWM0 0x00000001 // PWM0 Fault Value
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the PWM_O_ENUPD register.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_ENUPD_ENUPD7_M 0x0000C000 // PWM7 Enable Update Mode
|
|
#define PWM_ENUPD_ENUPD7_IMM 0x00000000 // Immediate
|
|
#define PWM_ENUPD_ENUPD7_LSYNC 0x00008000 // Locally Synchronized
|
|
#define PWM_ENUPD_ENUPD7_GSYNC 0x0000C000 // Globally Synchronized
|
|
#define PWM_ENUPD_ENUPD6_M 0x00003000 // PWM6 Enable Update Mode
|
|
#define PWM_ENUPD_ENUPD6_IMM 0x00000000 // Immediate
|
|
#define PWM_ENUPD_ENUPD6_LSYNC 0x00002000 // Locally Synchronized
|
|
#define PWM_ENUPD_ENUPD6_GSYNC 0x00003000 // Globally Synchronized
|
|
#define PWM_ENUPD_ENUPD5_M 0x00000C00 // PWM5 Enable Update Mode
|
|
#define PWM_ENUPD_ENUPD5_IMM 0x00000000 // Immediate
|
|
#define PWM_ENUPD_ENUPD5_LSYNC 0x00000800 // Locally Synchronized
|
|
#define PWM_ENUPD_ENUPD5_GSYNC 0x00000C00 // Globally Synchronized
|
|
#define PWM_ENUPD_ENUPD4_M 0x00000300 // PWM4 Enable Update Mode
|
|
#define PWM_ENUPD_ENUPD4_IMM 0x00000000 // Immediate
|
|
#define PWM_ENUPD_ENUPD4_LSYNC 0x00000200 // Locally Synchronized
|
|
#define PWM_ENUPD_ENUPD4_GSYNC 0x00000300 // Globally Synchronized
|
|
#define PWM_ENUPD_ENUPD3_M 0x000000C0 // PWM3 Enable Update Mode
|
|
#define PWM_ENUPD_ENUPD3_IMM 0x00000000 // Immediate
|
|
#define PWM_ENUPD_ENUPD3_LSYNC 0x00000080 // Locally Synchronized
|
|
#define PWM_ENUPD_ENUPD3_GSYNC 0x000000C0 // Globally Synchronized
|
|
#define PWM_ENUPD_ENUPD2_M 0x00000030 // PWM2 Enable Update Mode
|
|
#define PWM_ENUPD_ENUPD2_IMM 0x00000000 // Immediate
|
|
#define PWM_ENUPD_ENUPD2_LSYNC 0x00000020 // Locally Synchronized
|
|
#define PWM_ENUPD_ENUPD2_GSYNC 0x00000030 // Globally Synchronized
|
|
#define PWM_ENUPD_ENUPD1_M 0x0000000C // PWM1 Enable Update Mode
|
|
#define PWM_ENUPD_ENUPD1_IMM 0x00000000 // Immediate
|
|
#define PWM_ENUPD_ENUPD1_LSYNC 0x00000008 // Locally Synchronized
|
|
#define PWM_ENUPD_ENUPD1_GSYNC 0x0000000C // Globally Synchronized
|
|
#define PWM_ENUPD_ENUPD0_M 0x00000003 // PWM0 Enable Update Mode
|
|
#define PWM_ENUPD_ENUPD0_IMM 0x00000000 // Immediate
|
|
#define PWM_ENUPD_ENUPD0_LSYNC 0x00000002 // Locally Synchronized
|
|
#define PWM_ENUPD_ENUPD0_GSYNC 0x00000003 // Globally Synchronized
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the PWM_O_X_CTL register.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_X_CTL_LATCH 0x00040000 // Latch Fault Input
|
|
#define PWM_X_CTL_MINFLTPER 0x00020000 // Minimum Fault Period
|
|
#define PWM_X_CTL_FLTSRC 0x00010000 // Fault Condition Source
|
|
#define PWM_X_CTL_DBFALLUPD_M 0x0000C000 // PWMnDBFALL Update Mode
|
|
#define PWM_X_CTL_DBFALLUPD_I 0x00000000 // Immediate
|
|
#define PWM_X_CTL_DBFALLUPD_LS 0x00008000 // Locally Synchronized
|
|
#define PWM_X_CTL_DBFALLUPD_GS 0x0000C000 // Globally Synchronized
|
|
#define PWM_X_CTL_DBRISEUPD_M 0x00003000 // PWMnDBRISE Update Mode
|
|
#define PWM_X_CTL_DBRISEUPD_I 0x00000000 // Immediate
|
|
#define PWM_X_CTL_DBRISEUPD_LS 0x00002000 // Locally Synchronized
|
|
#define PWM_X_CTL_DBRISEUPD_GS 0x00003000 // Globally Synchronized
|
|
#define PWM_X_CTL_DBCTLUPD_M 0x00000C00 // PWMnDBCTL Update Mode
|
|
#define PWM_X_CTL_DBCTLUPD_I 0x00000000 // Immediate
|
|
#define PWM_X_CTL_DBCTLUPD_LS 0x00000800 // Locally Synchronized
|
|
#define PWM_X_CTL_DBCTLUPD_GS 0x00000C00 // Globally Synchronized
|
|
#define PWM_X_CTL_GENBUPD_M 0x00000300 // PWMnGENB Update Mode
|
|
#define PWM_X_CTL_GENBUPD_I 0x00000000 // Immediate
|
|
#define PWM_X_CTL_GENBUPD_LS 0x00000200 // Locally Synchronized
|
|
#define PWM_X_CTL_GENBUPD_GS 0x00000300 // Globally Synchronized
|
|
#define PWM_X_CTL_GENAUPD_M 0x000000C0 // PWMnGENA Update Mode
|
|
#define PWM_X_CTL_GENAUPD_I 0x00000000 // Immediate
|
|
#define PWM_X_CTL_GENAUPD_LS 0x00000080 // Locally Synchronized
|
|
#define PWM_X_CTL_GENAUPD_GS 0x000000C0 // Globally Synchronized
|
|
#define PWM_X_CTL_CMPBUPD 0x00000020 // Comparator B Update Mode
|
|
#define PWM_X_CTL_CMPAUPD 0x00000010 // Comparator A Update Mode
|
|
#define PWM_X_CTL_LOADUPD 0x00000008 // Load Register Update Mode
|
|
#define PWM_X_CTL_DEBUG 0x00000004 // Debug Mode
|
|
#define PWM_X_CTL_MODE 0x00000002 // Counter Mode
|
|
#define PWM_X_CTL_ENABLE 0x00000001 // PWM Block Enable
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the PWM_O_X_INTEN register.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_X_INTEN_TRCMPBD 0x00002000 // Trigger for Counter=PWMnCMPB
|
|
// Down
|
|
#define PWM_X_INTEN_TRCMPBU 0x00001000 // Trigger for Counter=PWMnCMPB Up
|
|
#define PWM_X_INTEN_TRCMPAD 0x00000800 // Trigger for Counter=PWMnCMPA
|
|
// Down
|
|
#define PWM_X_INTEN_TRCMPAU 0x00000400 // Trigger for Counter=PWMnCMPA Up
|
|
#define PWM_X_INTEN_TRCNTLOAD 0x00000200 // Trigger for Counter=PWMnLOAD
|
|
#define PWM_X_INTEN_TRCNTZERO 0x00000100 // Trigger for Counter=0
|
|
#define PWM_X_INTEN_INTCMPBD 0x00000020 // Interrupt for Counter=PWMnCMPB
|
|
// Down
|
|
#define PWM_X_INTEN_INTCMPBU 0x00000010 // Interrupt for Counter=PWMnCMPB
|
|
// Up
|
|
#define PWM_X_INTEN_INTCMPAD 0x00000008 // Interrupt for Counter=PWMnCMPA
|
|
// Down
|
|
#define PWM_X_INTEN_INTCMPAU 0x00000004 // Interrupt for Counter=PWMnCMPA
|
|
// Up
|
|
#define PWM_X_INTEN_INTCNTLOAD 0x00000002 // Interrupt for Counter=PWMnLOAD
|
|
#define PWM_X_INTEN_INTCNTZERO 0x00000001 // Interrupt for Counter=0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the PWM_O_X_RIS register.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_X_RIS_INTCMPBD 0x00000020 // Comparator B Down Interrupt
|
|
// Status
|
|
#define PWM_X_RIS_INTCMPBU 0x00000010 // Comparator B Up Interrupt Status
|
|
#define PWM_X_RIS_INTCMPAD 0x00000008 // Comparator A Down Interrupt
|
|
// Status
|
|
#define PWM_X_RIS_INTCMPAU 0x00000004 // Comparator A Up Interrupt Status
|
|
#define PWM_X_RIS_INTCNTLOAD 0x00000002 // Counter=Load Interrupt Status
|
|
#define PWM_X_RIS_INTCNTZERO 0x00000001 // Counter=0 Interrupt Status
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the PWM_O_X_ISC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_X_ISC_INTCMPBD 0x00000020 // Comparator B Down Interrupt
|
|
#define PWM_X_ISC_INTCMPBU 0x00000010 // Comparator B Up Interrupt
|
|
#define PWM_X_ISC_INTCMPAD 0x00000008 // Comparator A Down Interrupt
|
|
#define PWM_X_ISC_INTCMPAU 0x00000004 // Comparator A Up Interrupt
|
|
#define PWM_X_ISC_INTCNTLOAD 0x00000002 // Counter=Load Interrupt
|
|
#define PWM_X_ISC_INTCNTZERO 0x00000001 // Counter=0 Interrupt
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the PWM_O_X_LOAD register.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_X_LOAD_M 0x0000FFFF // Counter Load Value
|
|
#define PWM_X_LOAD_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the PWM_O_X_COUNT register.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_X_COUNT_M 0x0000FFFF // Counter Value
|
|
#define PWM_X_COUNT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the PWM_O_X_CMPA register.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_X_CMPA_M 0x0000FFFF // Comparator A Value
|
|
#define PWM_X_CMPA_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the PWM_O_X_CMPB register.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_X_CMPB_M 0x0000FFFF // Comparator B Value
|
|
#define PWM_X_CMPB_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the PWM_O_X_GENA register.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_X_GENA_ACTCMPBD_M 0x00000C00 // Action for Comparator B Down
|
|
#define PWM_X_GENA_ACTCMPBD_NONE \
|
|
0x00000000 // Do nothing
|
|
#define PWM_X_GENA_ACTCMPBD_INV 0x00000400 // Invert pwmA
|
|
#define PWM_X_GENA_ACTCMPBD_ZERO \
|
|
0x00000800 // Drive pwmA Low
|
|
#define PWM_X_GENA_ACTCMPBD_ONE 0x00000C00 // Drive pwmA High
|
|
#define PWM_X_GENA_ACTCMPBU_M 0x00000300 // Action for Comparator B Up
|
|
#define PWM_X_GENA_ACTCMPBU_NONE \
|
|
0x00000000 // Do nothing
|
|
#define PWM_X_GENA_ACTCMPBU_INV 0x00000100 // Invert pwmA
|
|
#define PWM_X_GENA_ACTCMPBU_ZERO \
|
|
0x00000200 // Drive pwmA Low
|
|
#define PWM_X_GENA_ACTCMPBU_ONE 0x00000300 // Drive pwmA High
|
|
#define PWM_X_GENA_ACTCMPAD_M 0x000000C0 // Action for Comparator A Down
|
|
#define PWM_X_GENA_ACTCMPAD_NONE \
|
|
0x00000000 // Do nothing
|
|
#define PWM_X_GENA_ACTCMPAD_INV 0x00000040 // Invert pwmA
|
|
#define PWM_X_GENA_ACTCMPAD_ZERO \
|
|
0x00000080 // Drive pwmA Low
|
|
#define PWM_X_GENA_ACTCMPAD_ONE 0x000000C0 // Drive pwmA High
|
|
#define PWM_X_GENA_ACTCMPAU_M 0x00000030 // Action for Comparator A Up
|
|
#define PWM_X_GENA_ACTCMPAU_NONE \
|
|
0x00000000 // Do nothing
|
|
#define PWM_X_GENA_ACTCMPAU_INV 0x00000010 // Invert pwmA
|
|
#define PWM_X_GENA_ACTCMPAU_ZERO \
|
|
0x00000020 // Drive pwmA Low
|
|
#define PWM_X_GENA_ACTCMPAU_ONE 0x00000030 // Drive pwmA High
|
|
#define PWM_X_GENA_ACTLOAD_M 0x0000000C // Action for Counter=LOAD
|
|
#define PWM_X_GENA_ACTLOAD_NONE 0x00000000 // Do nothing
|
|
#define PWM_X_GENA_ACTLOAD_INV 0x00000004 // Invert pwmA
|
|
#define PWM_X_GENA_ACTLOAD_ZERO 0x00000008 // Drive pwmA Low
|
|
#define PWM_X_GENA_ACTLOAD_ONE 0x0000000C // Drive pwmA High
|
|
#define PWM_X_GENA_ACTZERO_M 0x00000003 // Action for Counter=0
|
|
#define PWM_X_GENA_ACTZERO_NONE 0x00000000 // Do nothing
|
|
#define PWM_X_GENA_ACTZERO_INV 0x00000001 // Invert pwmA
|
|
#define PWM_X_GENA_ACTZERO_ZERO 0x00000002 // Drive pwmA Low
|
|
#define PWM_X_GENA_ACTZERO_ONE 0x00000003 // Drive pwmA High
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the PWM_O_X_GENB register.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_X_GENB_ACTCMPBD_M 0x00000C00 // Action for Comparator B Down
|
|
#define PWM_X_GENB_ACTCMPBD_NONE \
|
|
0x00000000 // Do nothing
|
|
#define PWM_X_GENB_ACTCMPBD_INV 0x00000400 // Invert pwmB
|
|
#define PWM_X_GENB_ACTCMPBD_ZERO \
|
|
0x00000800 // Drive pwmB Low
|
|
#define PWM_X_GENB_ACTCMPBD_ONE 0x00000C00 // Drive pwmB High
|
|
#define PWM_X_GENB_ACTCMPBU_M 0x00000300 // Action for Comparator B Up
|
|
#define PWM_X_GENB_ACTCMPBU_NONE \
|
|
0x00000000 // Do nothing
|
|
#define PWM_X_GENB_ACTCMPBU_INV 0x00000100 // Invert pwmB
|
|
#define PWM_X_GENB_ACTCMPBU_ZERO \
|
|
0x00000200 // Drive pwmB Low
|
|
#define PWM_X_GENB_ACTCMPBU_ONE 0x00000300 // Drive pwmB High
|
|
#define PWM_X_GENB_ACTCMPAD_M 0x000000C0 // Action for Comparator A Down
|
|
#define PWM_X_GENB_ACTCMPAD_NONE \
|
|
0x00000000 // Do nothing
|
|
#define PWM_X_GENB_ACTCMPAD_INV 0x00000040 // Invert pwmB
|
|
#define PWM_X_GENB_ACTCMPAD_ZERO \
|
|
0x00000080 // Drive pwmB Low
|
|
#define PWM_X_GENB_ACTCMPAD_ONE 0x000000C0 // Drive pwmB High
|
|
#define PWM_X_GENB_ACTCMPAU_M 0x00000030 // Action for Comparator A Up
|
|
#define PWM_X_GENB_ACTCMPAU_NONE \
|
|
0x00000000 // Do nothing
|
|
#define PWM_X_GENB_ACTCMPAU_INV 0x00000010 // Invert pwmB
|
|
#define PWM_X_GENB_ACTCMPAU_ZERO \
|
|
0x00000020 // Drive pwmB Low
|
|
#define PWM_X_GENB_ACTCMPAU_ONE 0x00000030 // Drive pwmB High
|
|
#define PWM_X_GENB_ACTLOAD_M 0x0000000C // Action for Counter=LOAD
|
|
#define PWM_X_GENB_ACTLOAD_NONE 0x00000000 // Do nothing
|
|
#define PWM_X_GENB_ACTLOAD_INV 0x00000004 // Invert pwmB
|
|
#define PWM_X_GENB_ACTLOAD_ZERO 0x00000008 // Drive pwmB Low
|
|
#define PWM_X_GENB_ACTLOAD_ONE 0x0000000C // Drive pwmB High
|
|
#define PWM_X_GENB_ACTZERO_M 0x00000003 // Action for Counter=0
|
|
#define PWM_X_GENB_ACTZERO_NONE 0x00000000 // Do nothing
|
|
#define PWM_X_GENB_ACTZERO_INV 0x00000001 // Invert pwmB
|
|
#define PWM_X_GENB_ACTZERO_ZERO 0x00000002 // Drive pwmB Low
|
|
#define PWM_X_GENB_ACTZERO_ONE 0x00000003 // Drive pwmB High
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the PWM_O_X_DBCTL register.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_X_DBCTL_ENABLE 0x00000001 // Dead-Band Generator Enable
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the PWM_O_X_DBRISE register.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_X_DBRISE_DELAY_M 0x00000FFF // Dead-Band Rise Delay
|
|
#define PWM_X_DBRISE_DELAY_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the PWM_O_X_DBFALL register.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_X_DBFALL_DELAY_M 0x00000FFF // Dead-Band Fall Delay
|
|
#define PWM_X_DBFALL_DELAY_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the PWM_O_X_FLTSRC0
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_X_FLTSRC0_FAULT3 0x00000008 // Fault3 Input
|
|
#define PWM_X_FLTSRC0_FAULT2 0x00000004 // Fault2 Input
|
|
#define PWM_X_FLTSRC0_FAULT1 0x00000002 // Fault1 Input
|
|
#define PWM_X_FLTSRC0_FAULT0 0x00000001 // Fault0 Input
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the PWM_O_X_FLTSRC1
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_X_FLTSRC1_DCMP7 0x00000080 // Digital Comparator 7
|
|
#define PWM_X_FLTSRC1_DCMP6 0x00000040 // Digital Comparator 6
|
|
#define PWM_X_FLTSRC1_DCMP5 0x00000020 // Digital Comparator 5
|
|
#define PWM_X_FLTSRC1_DCMP4 0x00000010 // Digital Comparator 4
|
|
#define PWM_X_FLTSRC1_DCMP3 0x00000008 // Digital Comparator 3
|
|
#define PWM_X_FLTSRC1_DCMP2 0x00000004 // Digital Comparator 2
|
|
#define PWM_X_FLTSRC1_DCMP1 0x00000002 // Digital Comparator 1
|
|
#define PWM_X_FLTSRC1_DCMP0 0x00000001 // Digital Comparator 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the PWM_O_X_MINFLTPER
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_X_MINFLTPER_M 0x0000FFFF // Minimum Fault Period
|
|
#define PWM_X_MINFLTPER_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the PWM_O_X_FLTSEN register.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_X_FLTSEN_FAULT3 0x00000008 // Fault3 Sense
|
|
#define PWM_X_FLTSEN_FAULT2 0x00000004 // Fault2 Sense
|
|
#define PWM_X_FLTSEN_FAULT1 0x00000002 // Fault1 Sense
|
|
#define PWM_X_FLTSEN_FAULT0 0x00000001 // Fault0 Sense
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the PWM_O_X_FLTSTAT0
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_X_FLTSTAT0_FAULT3 0x00000008 // Fault Input 3
|
|
#define PWM_X_FLTSTAT0_FAULT2 0x00000004 // Fault Input 2
|
|
#define PWM_X_FLTSTAT0_FAULT1 0x00000002 // Fault Input 1
|
|
#define PWM_X_FLTSTAT0_FAULT0 0x00000001 // Fault Input 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the PWM_O_X_FLTSTAT1
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_X_FLTSTAT1_DCMP7 0x00000080 // Digital Comparator 7 Trigger
|
|
#define PWM_X_FLTSTAT1_DCMP6 0x00000040 // Digital Comparator 6 Trigger
|
|
#define PWM_X_FLTSTAT1_DCMP5 0x00000020 // Digital Comparator 5 Trigger
|
|
#define PWM_X_FLTSTAT1_DCMP4 0x00000010 // Digital Comparator 4 Trigger
|
|
#define PWM_X_FLTSTAT1_DCMP3 0x00000008 // Digital Comparator 3 Trigger
|
|
#define PWM_X_FLTSTAT1_DCMP2 0x00000004 // Digital Comparator 2 Trigger
|
|
#define PWM_X_FLTSTAT1_DCMP1 0x00000002 // Digital Comparator 1 Trigger
|
|
#define PWM_X_FLTSTAT1_DCMP0 0x00000001 // Digital Comparator 0 Trigger
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the PWM_O_PP register.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_PP_GCNT_M 0x0000000F // Generators
|
|
#define PWM_PP_FCNT_M 0x000000F0 // Fault Inputs
|
|
#define PWM_PP_ESYNC 0x00000100 // Extended Synchronization
|
|
#define PWM_PP_EFAULT 0x00000200 // Extended Fault
|
|
#define PWM_PP_ONE 0x00000400 // One-Shot Mode
|
|
#define PWM_PP_GCNT_S 0
|
|
#define PWM_PP_FCNT_S 4
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the PWM_O_PC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_PC_PWMDIV_M 0x000000FF // PWM Clock Divisor
|
|
#define PWM_PC_PWMDIV_2 0x00000000 // /2
|
|
#define PWM_PC_PWMDIV_4 0x00000001 // /4
|
|
#define PWM_PC_PWMDIV_8 0x00000002 // /8
|
|
#define PWM_PC_PWMDIV_16 0x00000003 // /16
|
|
#define PWM_PC_PWMDIV_32 0x00000004 // /32
|
|
#define PWM_PC_PWMDIV_64 0x00000007 // /64 (default)
|
|
#define PWM_PC_USEOPWMDIV 0x00000100 // Enable PWM Clock Divisor
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the PWM Generator standard offsets.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_O_X_CTL 0x00000000 // Gen Control Reg
|
|
#define PWM_O_X_INTEN 0x00000004 // Gen Int/Trig Enable Reg
|
|
#define PWM_O_X_RIS 0x00000008 // Gen Raw Int Status Reg
|
|
#define PWM_O_X_ISC 0x0000000C // Gen Int Status Reg
|
|
#define PWM_O_X_LOAD 0x00000010 // Gen Load Reg
|
|
#define PWM_O_X_COUNT 0x00000014 // Gen Counter Reg
|
|
#define PWM_O_X_CMPA 0x00000018 // Gen Compare A Reg
|
|
#define PWM_O_X_CMPB 0x0000001C // Gen Compare B Reg
|
|
#define PWM_O_X_GENA 0x00000020 // Gen Generator A Ctrl Reg
|
|
#define PWM_O_X_GENB 0x00000024 // Gen Generator B Ctrl Reg
|
|
#define PWM_O_X_DBCTL 0x00000028 // Gen Dead Band Ctrl Reg
|
|
#define PWM_O_X_DBRISE 0x0000002C // Gen DB Rising Edge Delay Reg
|
|
#define PWM_O_X_DBFALL 0x00000030 // Gen DB Falling Edge Delay Reg
|
|
#define PWM_O_X_FLTSRC0 0x00000034 // Fault pin, comparator condition
|
|
#define PWM_O_X_FLTSRC1 0x00000038 // Digital comparator condition
|
|
#define PWM_O_X_MINFLTPER 0x0000003C // Fault minimum period extension
|
|
#define PWM_GEN_0_OFFSET 0x00000040 // PWM0 base
|
|
#define PWM_GEN_1_OFFSET 0x00000080 // PWM1 base
|
|
#define PWM_GEN_2_OFFSET 0x000000C0 // PWM2 base
|
|
#define PWM_GEN_3_OFFSET 0x00000100 // PWM3 base
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the PWM Generator extended offsets.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_O_X_FLTSEN 0x00000000 // Fault logic sense
|
|
#define PWM_O_X_FLTSTAT0 0x00000004 // Pin and comparator status
|
|
#define PWM_O_X_FLTSTAT1 0x00000008 // Digital comparator status
|
|
#define PWM_EXT_0_OFFSET 0x00000800 // PWM0 extended base
|
|
#define PWM_EXT_1_OFFSET 0x00000880 // PWM1 extended base
|
|
#define PWM_EXT_2_OFFSET 0x00000900 // PWM2 extended base
|
|
#define PWM_EXT_3_OFFSET 0x00000980 // PWM3 extended base
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following definitions are deprecated.
|
|
//
|
|
//*****************************************************************************
|
|
#ifndef DEPRECATED
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the bit fields in the PWM_O_CTL
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_CTL_GLOBAL_SYNC2 0x00000004 // Global sync generator 2
|
|
#define PWM_CTL_GLOBAL_SYNC1 0x00000002 // Global sync generator 1
|
|
#define PWM_CTL_GLOBAL_SYNC0 0x00000001 // Global sync generator 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the bit fields in the PWM_O_STATUS
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_STATUS_FAULT 0x00000001 // Fault Interrupt Status
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the PWM Interrupt Register bit
|
|
// definitions.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_INT_INTFAULT 0x00010000 // Fault interrupt pending
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the PWM_X Interrupt Status Register
|
|
// bit definitions.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_X_INT_INTCMPBD 0x00000020 // PWM_X_COUNT = PWM_X_CMPB D rcvd
|
|
#define PWM_X_INT_INTCMPBU 0x00000010 // PWM_X_COUNT = PWM_X_CMPB U rcvd
|
|
#define PWM_X_INT_INTCMPAD 0x00000008 // PWM_X_COUNT = PWM_X_CMPA D rcvd
|
|
#define PWM_X_INT_INTCMPAU 0x00000004 // PWM_X_COUNT = PWM_X_CMPA U rcvd
|
|
#define PWM_X_INT_INTCNTLOAD 0x00000002 // PWM_X_COUNT = PWM_X_LOAD rcvd
|
|
#define PWM_X_INT_INTCNTZERO 0x00000001 // PWM_X_COUNT = 0 received
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the PWM_X Generator A/B Control
|
|
// Register bit definitions.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_X_GEN_Y_ACTCMPBD 0x00000C00 // Act PWM_X_COUNT = PWM_X_CMPB D
|
|
#define PWM_X_GEN_Y_ACTCMPBU 0x00000300 // Act PWM_X_COUNT = PWM_X_CMPB U
|
|
#define PWM_X_GEN_Y_ACTCMPAD 0x000000C0 // Act PWM_X_COUNT = PWM_X_CMPA D
|
|
#define PWM_X_GEN_Y_ACTCMPAU 0x00000030 // Act PWM_X_COUNT = PWM_X_CMPA U
|
|
#define PWM_X_GEN_Y_ACTLOAD 0x0000000C // Act PWM_X_COUNT = PWM_X_LOAD
|
|
#define PWM_X_GEN_Y_ACTZERO 0x00000003 // Act PWM_X_COUNT = 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the PWM_X Generator A/B Control
|
|
// Register action definitions.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_GEN_ACT_ONE 0x00000003 // Set the output signal to one
|
|
#define PWM_GEN_ACT_ZERO 0x00000002 // Set the output signal to zero
|
|
#define PWM_GEN_ACT_INV 0x00000001 // Invert the output signal
|
|
#define PWM_GEN_ACT_NONE 0x00000000 // Do nothing
|
|
#define PWM_GEN_ACT_B_DN_SHIFT 10 // Shift amount for the B dn action
|
|
#define PWM_GEN_ACT_B_UP_SHIFT 8 // Shift amount for the B up action
|
|
#define PWM_GEN_ACT_A_DN_SHIFT 6 // Shift amount for the A dn action
|
|
#define PWM_GEN_ACT_A_UP_SHIFT 4 // Shift amount for the A up action
|
|
#define PWM_GEN_ACT_LOAD_SHIFT 2 // Shift amount for the load action
|
|
#define PWM_GEN_ACT_ZERO_SHIFT 0 // Shift amount for the zero action
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the PWM_X Dead Band Control
|
|
// Register bit definitions.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_DBCTL_ENABLE 0x00000001 // Enable dead band insertion
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the PWM Register reset values.
|
|
//
|
|
//*****************************************************************************
|
|
#define PWM_RV_X_DBCTL 0x00000000 // Control the dead band generator
|
|
#define PWM_RV_STATUS 0x00000000 // Status
|
|
#define PWM_RV_X_ISC 0x00000000 // Interrupt status and clearing
|
|
#define PWM_RV_X_RIS 0x00000000 // Raw interrupt status
|
|
#define PWM_RV_X_CTL 0x00000000 // Master control of the PWM
|
|
// generator block
|
|
#define PWM_RV_SYNC 0x00000000 // Counter synch for PWM generators
|
|
#define PWM_RV_X_DBFALL 0x00000000 // The dead band falling edge delay
|
|
// count
|
|
#define PWM_RV_X_INTEN 0x00000000 // Interrupt and trigger enable
|
|
#define PWM_RV_X_LOAD 0x00000000 // The load value for the counter
|
|
#define PWM_RV_X_GENA 0x00000000 // Controls PWM generator A
|
|
#define PWM_RV_CTL 0x00000000 // Master control of the PWM module
|
|
#define PWM_RV_FAULT 0x00000000 // Fault handling for the PWM
|
|
// output pins
|
|
#define PWM_RV_RIS 0x00000000 // Raw interrupt status
|
|
#define PWM_RV_X_CMPA 0x00000000 // The comparator A value
|
|
#define PWM_RV_INVERT 0x00000000 // Inversion control for PWM output
|
|
// pins
|
|
#define PWM_RV_X_DBRISE 0x00000000 // The dead band rising edge delay
|
|
// count
|
|
#define PWM_RV_ENABLE 0x00000000 // Master enable for the PWM output
|
|
// pins
|
|
#define PWM_RV_X_GENB 0x00000000 // Controls PWM generator B
|
|
#define PWM_RV_X_CMPB 0x00000000 // The comparator B value
|
|
#define PWM_RV_ISC 0x00000000 // Interrupt status and clearing
|
|
#define PWM_RV_INTEN 0x00000000 // Interrupt enable
|
|
#define PWM_RV_X_COUNT 0x00000000 // The current counter value
|
|
|
|
#endif
|
|
|
|
#endif // __HW_PWM_H__
|