libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity
rt-thread-official/bsp/msp432e401y-LaunchPad/libraries/msp432e4/inc/msp432e411y.h

18251 lines
976 KiB
C
Raw Blame History

/******************************************************************************
*
* Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the
* distribution.
*
* Neither the name of Texas Instruments Incorporated nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* MSP432E411Y Register Definitions
*
* This file includes CMSIS compliant component and register definitions
*
*
* With CMSIS definitions, the register defines have been reformatted:
* ModuleName[ModuleInstance]->RegisterName
*
* Writing to CMSIS bit fields can be done through register level
* or via bitband area access:
* - ADC14->CTL0 |= ADC14_CTL0_ENC;
* - BITBAND_PERI(ADC14->CTL0, ADC14_CTL0_ENC_OFS) = 1;
*
* File creation date: 2018-09-17
*
******************************************************************************/
#ifndef __MSP432E411Y_H__
#define __MSP432E411Y_H__
#ifdef __cplusplus
extern "C" {
#endif
#define __MSP432_HEADER_VERSION__ 3260
/* ------------------------- Interrupt Number Definition ------------------------ */
typedef enum
{
/* ------------------- Cortex-M4 Processor Exceptions Numbers ------------------- */
Reset_IRQn = -15, /*!< 1 Reset Vector, invoked on Power up and warm reset */
NonMaskableInt_IRQn = -14, /*!< 2 Non maskable Interrupt, cannot be stopped or preempted */
HardFault_IRQn = -13, /*!< 3 Hard Fault, all classes of Fault */
MemoryManagement_IRQn = -12, /*!< 4 Memory Management, MPU mismatch, including Access Violation
and No Match */
BusFault_IRQn = -11, /*!< 5 Bus Fault, Pre-Fetch-, Memory Access Fault, other address/memory
related Fault */
UsageFault_IRQn = -10, /*!< 6 Usage Fault, i.e. Undef Instruction, Illegal State Transition */
SVCall_IRQn = -5, /*!< 11 System Service Call via SVC instruction */
DebugMonitor_IRQn = -4, /*!< 12 Debug Monitor */
PendSV_IRQn = -2, /*!< 14 Pendable request for system service */
SysTick_IRQn = -1, /*!< 15 System Tick Timer */
/* ------------------ MSP432E411Y Specific Interrupt Numbers ------------------ */
GPIOA_IRQn = 0, /*!< 0 GPIOA */
GPIOB_IRQn = 1, /*!< 1 GPIOB */
GPIOC_IRQn = 2, /*!< 2 GPIOC */
GPIOD_IRQn = 3, /*!< 3 GPIOD */
GPIOE_IRQn = 4, /*!< 4 GPIOE */
UART0_IRQn = 5, /*!< 5 UART0 */
UART1_IRQn = 6, /*!< 6 UART1 */
SSI0_IRQn = 7, /*!< 7 SSI0 */
I2C0_IRQn = 8, /*!< 8 I2C0 */
PWM0_FAULT_IRQn = 9, /*!< 9 PWM0_FAULT */
PWM0_0_IRQn = 10, /*!< 10 PWM0_0 */
PWM0_1_IRQn = 11, /*!< 11 PWM0_1 */
PWM0_2_IRQn = 12, /*!< 12 PWM0_2 */
QEI0_IRQn = 13, /*!< 13 QEI0 */
ADC0SS0_IRQn = 14, /*!< 14 ADC0SS0 */
ADC0SS1_IRQn = 15, /*!< 15 ADC0SS1 */
ADC0SS2_IRQn = 16, /*!< 16 ADC0SS2 */
ADC0SS3_IRQn = 17, /*!< 17 ADC0SS3 */
WATCHDOG0_IRQn = 18, /*!< 18 WATCHDOG0 */
TIMER0A_IRQn = 19, /*!< 19 TIMER0A */
TIMER0B_IRQn = 20, /*!< 20 TIMER0B */
TIMER1A_IRQn = 21, /*!< 21 TIMER1A */
TIMER1B_IRQn = 22, /*!< 22 TIMER1B */
TIMER2A_IRQn = 23, /*!< 23 TIMER2A */
TIMER2B_IRQn = 24, /*!< 24 TIMER2B */
COMP0_IRQn = 25, /*!< 25 COMP0 */
COMP1_IRQn = 26, /*!< 26 COMP1 */
COMP2_IRQn = 27, /*!< 27 COMP2 */
SYSCTL_IRQn = 28, /*!< 28 SYSCTL */
FLASH_CTRL_IRQn = 29, /*!< 29 FLASH_CTRL */
GPIOF_IRQn = 30, /*!< 30 GPIOF */
GPIOG_IRQn = 31, /*!< 31 GPIOG */
GPIOH_IRQn = 32, /*!< 32 GPIOH */
UART2_IRQn = 33, /*!< 33 UART2 */
SSI1_IRQn = 34, /*!< 34 SSI1 */
TIMER3A_IRQn = 35, /*!< 35 TIMER3A */
TIMER3B_IRQn = 36, /*!< 36 TIMER3B */
I2C1_IRQn = 37, /*!< 37 I2C1 */
CAN0_IRQn = 38, /*!< 38 CAN0 */
CAN1_IRQn = 39, /*!< 39 CAN1 */
EMAC0_IRQn = 40, /*!< 40 EMAC0 */
HIB_IRQn = 41, /*!< 41 HIB */
USB0_IRQn = 42, /*!< 42 USB0 */
PWM0_3_IRQn = 43, /*!< 43 PWM0_3 */
UDMA_IRQn = 44, /*!< 44 UDMA */
UDMAERR_IRQn = 45, /*!< 45 UDMAERR */
ADC1SS0_IRQn = 46, /*!< 46 ADC1SS0 */
ADC1SS1_IRQn = 47, /*!< 47 ADC1SS1 */
ADC1SS2_IRQn = 48, /*!< 48 ADC1SS2 */
ADC1SS3_IRQn = 49, /*!< 49 ADC1SS3 */
EPI0_IRQn = 50, /*!< 50 EPI0 */
GPIOJ_IRQn = 51, /*!< 51 GPIOJ */
GPIOK_IRQn = 52, /*!< 52 GPIOK */
GPIOL_IRQn = 53, /*!< 53 GPIOL */
SSI2_IRQn = 54, /*!< 54 SSI2 */
SSI3_IRQn = 55, /*!< 55 SSI3 */
UART3_IRQn = 56, /*!< 56 UART3 */
UART4_IRQn = 57, /*!< 57 UART4 */
UART5_IRQn = 58, /*!< 58 UART5 */
UART6_IRQn = 59, /*!< 59 UART6 */
UART7_IRQn = 60, /*!< 60 UART7 */
I2C2_IRQn = 61, /*!< 61 I2C2 */
I2C3_IRQn = 62, /*!< 62 I2C3 */
TIMER4A_IRQn = 63, /*!< 63 TIMER4A */
TIMER4B_IRQn = 64, /*!< 64 TIMER4B */
TIMER5A_IRQn = 65, /*!< 65 TIMER5A */
TIMER5B_IRQn = 66, /*!< 66 TIMER5B */
SYSEXC_IRQn = 67, /*!< 67 Floating-Point Exception (imprecise) */
I2C4_IRQn = 70, /*!< 70 I2C4 */
I2C5_IRQn = 71, /*!< 71 I2C5 */
GPIOM_IRQn = 72, /*!< 72 GPIOM */
GPION_IRQn = 73, /*!< 73 GPION */
GPIOP0_IRQn = 76, /*!< 76 GPIOP0 */
GPIOP1_IRQn = 77, /*!< 77 GPIOP1 */
GPIOP2_IRQn = 78, /*!< 78 GPIOP2 */
GPIOP3_IRQn = 79, /*!< 79 GPIOP3 */
GPIOP4_IRQn = 80, /*!< 80 GPIOP4 */
GPIOP5_IRQn = 81, /*!< 81 GPIOP5 */
GPIOP6_IRQn = 82, /*!< 82 GPIOP6 */
GPIOP7_IRQn = 83, /*!< 83 GPIOP7 */
GPIOQ0_IRQn = 84, /*!< 84 GPIOQ0 */
GPIOQ1_IRQn = 85, /*!< 85 GPIOQ1 */
GPIOQ2_IRQn = 86, /*!< 86 GPIOQ2 */
GPIOQ3_IRQn = 87, /*!< 87 GPIOQ3 */
GPIOQ4_IRQn = 88, /*!< 88 GPIOQ4 */
GPIOQ5_IRQn = 89, /*!< 89 GPIOQ5 */
GPIOQ6_IRQn = 90, /*!< 90 GPIOQ6 */
GPIOQ7_IRQn = 91, /*!< 91 GPIOQ7 */
GPIOR_IRQn = 92, /*!< 92 GPIOR */
GPIOS_IRQn = 93, /*!< 93 GPIOS */
SHA_MD5_IRQn = 94, /*!< 94 SHA/MD5 */
AES_IRQn = 95, /*!< 95 AES */
DES_IRQn = 96, /*!< 96 DES */
LCD0_IRQn = 97, /*!< 97 LCD0 */
TIMER6A_IRQn = 98, /*!< 98 TIMER6A */
TIMER6B_IRQn = 99, /*!< 99 TIMER6B */
TIMER7A_IRQn = 100, /*!< 100 TIMER7A */
TIMER7B_IRQn = 101, /*!< 101 TIMER7B */
I2C6_IRQn = 102, /*!< 102 I2C6 */
I2C7_IRQn = 103, /*!< 103 I2C7 */
ONEWIRE0_IRQn = 105, /*!< 105 ONEWIRE0 */
I2C8_IRQn = 109, /*!< 109 I2C8 */
I2C9_IRQn = 110, /*!< 110 I2C9 */
GPIOT_IRQn = 111 /*!< 111 GPIOT */
} IRQn_Type;
/** @addtogroup Configuration_of_CMSIS
* @{
*/
/* ================================================================================ */
/* ================ Processor and Core Peripheral Section ================ */
/* ================================================================================ */
/* ----------------Configuration of the Cortex-M4 Processor and Core Peripherals---------------- */
#define __CM4_REV 0x0102 /*!< Cortex-M4 Core Revision */
#define __MPU_PRESENT 1 /*!< MPU present or not */
#define __NVIC_PRIO_BITS 3 /*!< Number of Bits used for Priority Levels */
#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
#define __FPU_PRESENT 1 /*!< FPU present or not */
/** @} */ /* End of group Configuration_of_CMSIS */
#include "core_cm4.h" /*!< Cortex-M4 processor and core peripherals */
#include "system_msp432e411y.h" /*!< MSP432E411Y System */
/******************************************************************************
* Definition of standard bits *
******************************************************************************/
#define BIT0 (uint16_t)(0x0001)
#define BIT1 (uint16_t)(0x0002)
#define BIT2 (uint16_t)(0x0004)
#define BIT3 (uint16_t)(0x0008)
#define BIT4 (uint16_t)(0x0010)
#define BIT5 (uint16_t)(0x0020)
#define BIT6 (uint16_t)(0x0040)
#define BIT7 (uint16_t)(0x0080)
#define BIT8 (uint16_t)(0x0100)
#define BIT9 (uint16_t)(0x0200)
#define BITA (uint16_t)(0x0400)
#define BITB (uint16_t)(0x0800)
#define BITC (uint16_t)(0x1000)
#define BITD (uint16_t)(0x2000)
#define BITE (uint16_t)(0x4000)
#define BITF (uint16_t)(0x8000)
#define BIT(x) ((uint16_t)1 << (x))
/* ================================================================================ */
/* ================ Available Peripherals ================ */
/* ================================================================================ */
#define __MCU_HAS_ADC0__ /*!< Module ADC0 is available */
#define __MCU_HAS_ADC1__ /*!< Module ADC1 is available */
#define __MCU_HAS_AES0__ /*!< Module AES is available */
#define __MCU_HAS_CAN0__ /*!< Module CAN 0 is available */
#define __MCU_HAS_CAN1__ /*!< Module CAN 1 is available */
#define __MCU_HAS_CCM0__ /*!< Module EC is available */
#define __MCU_HAS_COMP0__ /*!< Module Analog Comparator 0 is available */
#define __MCU_HAS_COMP1__ /*!< Module Analog Comparator 1 is available */
#define __MCU_HAS_COMP2__ /*!< Module Analog Comparator 2 is available */
#define __MCU_HAS_DES0__ /*!< Module DES is available */
#define __MCU_HAS_EEPROM__ /*!< Module EEPROM is available */
#define __MCU_HAS_EMAC0__ /*!< Module Ethernet MAC 0 is available */
#define __MCU_HAS_EPI0__ /*!< Module EPI 0 is available */
#define __MCU_HAS_FLASH_CTRL__ /*!< Module Flash Memory Control is available */
#define __MCU_HAS_GPIOA__ /*!< Module GPIO Port A is available */
#define __MCU_HAS_GPIOB__ /*!< Module GPIO Port A is available */
#define __MCU_HAS_GPIOC__ /*!< Module GPIO Port C is available */
#define __MCU_HAS_GPIOD__ /*!< Module GPIO Port D is available */
#define __MCU_HAS_GPIOE__ /*!< Module GPIO Port E is available */
#define __MCU_HAS_GPIOF__ /*!< Module GPIO Port F is available */
#define __MCU_HAS_GPIOG__ /*!< Module GPIO Port G is available */
#define __MCU_HAS_GPIOH__ /*!< Module GPIO Port H is available */
#define __MCU_HAS_GPIOJ__ /*!< Module GPIO Port J is available */
#define __MCU_HAS_GPIOK__ /*!< Module GPIO Port K is available */
#define __MCU_HAS_GPIOL__ /*!< Module GPIO Port L is available */
#define __MCU_HAS_GPIOM__ /*!< Module GPIO Port M is available */
#define __MCU_HAS_GPION__ /*!< Module GPIO Port N is available */
#define __MCU_HAS_GPIOP__ /*!< Module GPIO Port P is available */
#define __MCU_HAS_GPIOQ__ /*!< Module GPIO Port Q is available */
#define __MCU_HAS_GPIOR__ /*!< Module GPIO Port R is available */
#define __MCU_HAS_GPIOS__ /*!< Module GPIO Port S is available */
#define __MCU_HAS_GPIOT__ /*!< Module GPIO Port T is available */
#define __MCU_HAS_HIBERNATE__ /*!< Module HIB is available */
#define __MCU_HAS_I2C0__ /*!< Module I2C0 is available */
#define __MCU_HAS_I2C1__ /*!< Module I2C1 is available */
#define __MCU_HAS_I2C2__ /*!< Module I2C2 is available */
#define __MCU_HAS_I2C3__ /*!< Module I2C3 is available */
#define __MCU_HAS_I2C4__ /*!< Module I2C4 is available */
#define __MCU_HAS_I2C5__ /*!< Module I2C5 is available */
#define __MCU_HAS_I2C6__ /*!< Module I2C6 is available */
#define __MCU_HAS_I2C7__ /*!< Module I2C7 is available */
#define __MCU_HAS_I2C8__ /*!< Module I2C8 is available */
#define __MCU_HAS_I2C9__ /*!< Module I2C9 is available */
#define __MCU_HAS_LCD0__ /*!< Module LCD is available */
#define __MCU_HAS_ONEWIRE0__ /*!< Module 1-Wire is available */
#define __MCU_HAS_PWM0__ /*!< Module PWM0 is available */
#define __MCU_HAS_QEI0__ /*!< Module QEI0 is available */
#define __MCU_HAS_SHA0__ /*!< Module SHA/MD5 is available */
#define __MCU_HAS_SSI0__ /*!< Module SSI0 is available */
#define __MCU_HAS_SSI1__ /*!< Module SSI1 is available */
#define __MCU_HAS_SSI2__ /*!< Module SSI2 is available */
#define __MCU_HAS_SSI3__ /*!< Module SSI3 is available */
#define __MCU_HAS_SYSCTL__ /*!< Module System Control is available */
#define __MCU_HAS_SYSEXC__ /*!< Module Floating-Point Exception is available */
#define __MCU_HAS_TEMPER0__ /*!< Module Temper is available */
#define __MCU_HAS_TIMER0A__ /*!< Module 16/32-Bit Timer 0A is available */
#define __MCU_HAS_TIMER0B__ /*!< Module 16/32-Bit Timer 0B is available */
#define __MCU_HAS_TIMER1A__ /*!< Module 16/32-Bit Timer 1A is available */
#define __MCU_HAS_TIMER1B__ /*!< Module 16/32-Bit Timer 1B is available */
#define __MCU_HAS_TIMER2A__ /*!< Module 16/32-Bit Timer 2A is available */
#define __MCU_HAS_TIMER2B__ /*!< Module 16/32-Bit Timer 2B is available */
#define __MCU_HAS_TIMER3A__ /*!< Module 16/32-Bit Timer 3A is available */
#define __MCU_HAS_TIMER3B__ /*!< Module 16/32-Bit Timer 3B is available */
#define __MCU_HAS_TIMER4A__ /*!< Module 16/32-Bit Timer 4A is available */
#define __MCU_HAS_TIMER4B__ /*!< Module 16/32-Bit Timer 4B is available */
#define __MCU_HAS_TIMER5A__ /*!< Module 16/32-Bit Timer 5A is available */
#define __MCU_HAS_TIMER5B__ /*!< Module 16/32-Bit Timer 5B is available */
#define __MCU_HAS_TIMER6A__ /*!< Module 16/32-Bit Timer 6A is available */
#define __MCU_HAS_TIMER6B__ /*!< Module 16/32-Bit Timer 6B is available */
#define __MCU_HAS_TIMER7A__ /*!< Module 16/32-Bit Timer 7A is available */
#define __MCU_HAS_TIMER7B__ /*!< Module 16/32-Bit Timer 7B is available */
#define __MCU_HAS_UART0__ /*!< Module UART0 is available */
#define __MCU_HAS_UART1__ /*!< Module UART1 is available */
#define __MCU_HAS_UART2__ /*!< Module UART2 is available */
#define __MCU_HAS_UART3__ /*!< Module UART3 is available */
#define __MCU_HAS_UART4__ /*!< Module UART4 is available */
#define __MCU_HAS_UART5__ /*!< Module UART5 is available */
#define __MCU_HAS_UART6__ /*!< Module UART6 is available */
#define __MCU_HAS_UART7__ /*!< Module UART7 is available */
#define __MCU_HAS_UDMA__ /*!< Module uDMA 0 Software is available */
#define __MCU_HAS_USB0__ /*!< Module USB MAC is available */
#define __MCU_HAS_WATCHDOG0__ /*!< Module Watchdog Timer 0 is available */
#define __MCU_HAS_WATCHDOG1__ /*!< Module Watchdog Timer 1 is available */
/* ================================================================================ */
/* ================ Device Specific Peripheral Section ================ */
/* ================================================================================ */
/** @addtogroup Device_Peripheral_Registers
* @{
*/
/* ------------------- Start of section using anonymous unions ------------------ */
#if defined(__CC_ARM)
#pragma push
#pragma anon_unions
#elif defined(__ICCARM__)
#pragma language=extended
#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
#pragma clang diagnostic push
#pragma clang diagnostic ignored "-Wc11-extensions"
#elif defined(__GNUC__)
/* anonymous unions are enabled by default */
#elif defined(__TMS470__)
/* anonymous unions are enabled by default */
#elif defined(__TASKING__)
#pragma warning 586
#else
#warning Not supported compiler type
#endif
/* ================================================================================ */
/* ================ WATCHDOG0 ================ */
/* ================================================================================ */
/**
* @brief Register map for WATCHDOG0 peripheral (WATCHDOG0)
*/
typedef struct /*!< WATCHDOG0 Structure */
{
__IO uint32_t LOAD; /*!< Watchdog Load */
__IO uint32_t VALUE; /*!< Watchdog Value */
__IO uint32_t CTL; /*!< Watchdog Control */
__O uint32_t ICR; /*!< Watchdog Interrupt Clear */
__IO uint32_t RIS; /*!< Watchdog Raw Interrupt Status */
__IO uint32_t MIS; /*!< Watchdog Masked Interrupt Status */
__I uint32_t RESERVED0[256];
__IO uint32_t TEST; /*!< Watchdog Test */
__I uint32_t RESERVED1[505];
__IO uint32_t LOCK; /*!< Watchdog Lock */
} WATCHDOG0_Type;
/* ================================================================================ */
/* ================ SSI0 ================ */
/* ================================================================================ */
/**
* @brief Register map for SSI0 peripheral (SSI0)
*/
typedef struct /*!< SSI0 Structure */
{
__IO uint32_t CR0; /*!< SSI Control 0 */
__IO uint32_t CR1; /*!< SSI Control 1 */
__IO uint32_t DR; /*!< SSI Data */
__IO uint32_t SR; /*!< SSI Status */
__IO uint32_t CPSR; /*!< SSI Clock Prescale */
__IO uint32_t IM; /*!< SSI Interrupt Mask */
__IO uint32_t RIS; /*!< SSI Raw Interrupt Status */
__IO uint32_t MIS; /*!< SSI Masked Interrupt Status */
__O uint32_t ICR; /*!< SSI Interrupt Clear */
__IO uint32_t DMACTL; /*!< SSI DMA Control */
__I uint32_t RESERVED0[998];
__IO uint32_t PP; /*!< SSI Peripheral Properties */
__I uint32_t RESERVED1;
__IO uint32_t CC; /*!< SSI Clock Configuration */
} SSI0_Type;
/* ================================================================================ */
/* ================ UART0 ================ */
/* ================================================================================ */
/**
* @brief Register map for UART0 peripheral (UART0)
*/
typedef struct /*!< UART0 Structure */
{
__IO uint32_t DR; /*!< UART Data */
union
{
__IO uint32_t ECR; /*!< UART Receive Status/Error Clear */
__IO uint32_t RSR; /*!< UART Receive Status/Error Clear */
};
__I uint32_t RESERVED0[4];
__IO uint32_t FR; /*!< UART Flag */
__I uint32_t RESERVED1;
__IO uint32_t ILPR; /*!< UART IrDA Low-Power Register */
__IO uint32_t IBRD; /*!< UART Integer Baud-Rate Divisor */
__IO uint32_t FBRD; /*!< UART Fractional Baud-Rate Divisor */
__IO uint32_t LCRH; /*!< UART Line Control */
__IO uint32_t CTL; /*!< UART Control */
__IO uint32_t IFLS; /*!< UART Interrupt FIFO Level Select */
__IO uint32_t IM; /*!< UART Interrupt Mask */
__IO uint32_t RIS; /*!< UART Raw Interrupt Status */
__IO uint32_t MIS; /*!< UART Masked Interrupt Status */
__O uint32_t ICR; /*!< UART Interrupt Clear */
__IO uint32_t DMACTL; /*!< UART DMA Control */
__I uint32_t RESERVED2[22];
__IO uint32_t _9BITADDR; /*!< UART 9-Bit Self Address */
__IO uint32_t _9BITAMASK; /*!< UART 9-Bit Self Address Mask */
__I uint32_t RESERVED3[965];
__IO uint32_t PP; /*!< UART Peripheral Properties */
__I uint32_t RESERVED4;
__IO uint32_t CC; /*!< UART Clock Configuration */
} UART0_Type;
/* ================================================================================ */
/* ================ I2C0 ================ */
/* ================================================================================ */
/**
* @brief Register map for I2C0 peripheral (I2C0)
*/
typedef struct /*!< I2C0 Structure */
{
__IO uint32_t MSA; /*!< I2C Master Slave Address */
__IO uint32_t MCS; /*!< I2C Master Control/Status */
__IO uint32_t MDR; /*!< I2C Master Data */
__IO uint32_t MTPR; /*!< I2C Master Timer Period */
__IO uint32_t MIMR; /*!< I2C Master Interrupt Mask */
__IO uint32_t MRIS; /*!< I2C Master Raw Interrupt Status */
__IO uint32_t MMIS; /*!< I2C Master Masked Interrupt Status */
__O uint32_t MICR; /*!< I2C Master Interrupt Clear */
__IO uint32_t MCR; /*!< I2C Master Configuration */
__IO uint32_t MCLKOCNT; /*!< I2C Master Clock Low Timeout Count */
__I uint32_t RESERVED0;
__IO uint32_t MBMON; /*!< I2C Master Bus Monitor */
__IO uint32_t MBLEN; /*!< I2C Master Burst Length */
__IO uint32_t MBCNT; /*!< I2C Master Burst Count */
__I uint32_t RESERVED1[498];
__IO uint32_t SOAR; /*!< I2C Slave Own Address */
__IO uint32_t SCSR; /*!< I2C Slave Control/Status */
__IO uint32_t SDR; /*!< I2C Slave Data */
__IO uint32_t SIMR; /*!< I2C Slave Interrupt Mask */
__IO uint32_t SRIS; /*!< I2C Slave Raw Interrupt Status */
__IO uint32_t SMIS; /*!< I2C Slave Masked Interrupt Status */
__O uint32_t SICR; /*!< I2C Slave Interrupt Clear */
__IO uint32_t SOAR2; /*!< I2C Slave Own Address 2 */
__IO uint32_t SACKCTL; /*!< I2C Slave ACK Control */
__I uint32_t RESERVED2[439];
__IO uint32_t FIFODATA; /*!< I2C FIFO Data */
__IO uint32_t FIFOCTL; /*!< I2C FIFO Control */
__IO uint32_t FIFOSTATUS; /*!< I2C FIFO Status */
__I uint32_t RESERVED3[45];
__IO uint32_t PP; /*!< I2C Peripheral Properties */
__IO uint32_t PC; /*!< I2C Peripheral Configuration */
} I2C0_Type;
/* ================================================================================ */
/* ================ PWM0 ================ */
/* ================================================================================ */
/**
* @brief Register map for PWM0 peripheral (PWM0)
*/
typedef struct /*!< PWM0 Structure */
{
__IO uint32_t CTL; /*!< PWM Master Control */
__IO uint32_t SYNC; /*!< PWM Time Base Sync */
__IO uint32_t ENABLE; /*!< PWM Output Enable */
__IO uint32_t INVERT; /*!< PWM Output Inversion */
__IO uint32_t FAULT; /*!< PWM Output Fault */
__IO uint32_t INTEN; /*!< PWM Interrupt Enable */
__IO uint32_t RIS; /*!< PWM Raw Interrupt Status */
__IO uint32_t ISC; /*!< PWM Interrupt Status and Clear */
__IO uint32_t STATUS; /*!< PWM Status */
__IO uint32_t FAULTVAL; /*!< PWM Fault Condition Value */
__IO uint32_t ENUPD; /*!< PWM Enable Update */
__I uint32_t RESERVED0[5];
__IO uint32_t _0_CTL; /*!< PWM0 Control */
__IO uint32_t _0_INTEN; /*!< PWM0 Interrupt and Trigger Enable */
__IO uint32_t _0_RIS; /*!< PWM0 Raw Interrupt Status */
__IO uint32_t _0_ISC; /*!< PWM0 Interrupt Status and Clear */
__IO uint32_t _0_LOAD; /*!< PWM0 Load */
__IO uint32_t _0_COUNT; /*!< PWM0 Counter */
__IO uint32_t _0_CMPA; /*!< PWM0 Compare A */
__IO uint32_t _0_CMPB; /*!< PWM0 Compare B */
__IO uint32_t _0_GENA; /*!< PWM0 Generator A Control */
__IO uint32_t _0_GENB; /*!< PWM0 Generator B Control */
__IO uint32_t _0_DBCTL; /*!< PWM0 Dead-Band Control */
__IO uint32_t _0_DBRISE; /*!< PWM0 Dead-Band Rising-Edge Delay */
__IO uint32_t _0_DBFALL; /*!< PWM0 Dead-Band Falling-Edge-Delay */
__IO uint32_t _0_FLTSRC0; /*!< PWM0 Fault Source 0 */
__IO uint32_t _0_FLTSRC1; /*!< PWM0 Fault Source 1 */
__IO uint32_t _0_MINFLTPER; /*!< PWM0 Minimum Fault Period */
__IO uint32_t _1_CTL; /*!< PWM1 Control */
__IO uint32_t _1_INTEN; /*!< PWM1 Interrupt and Trigger Enable */
__IO uint32_t _1_RIS; /*!< PWM1 Raw Interrupt Status */
__IO uint32_t _1_ISC; /*!< PWM1 Interrupt Status and Clear */
__IO uint32_t _1_LOAD; /*!< PWM1 Load */
__IO uint32_t _1_COUNT; /*!< PWM1 Counter */
__IO uint32_t _1_CMPA; /*!< PWM1 Compare A */
__IO uint32_t _1_CMPB; /*!< PWM1 Compare B */
__IO uint32_t _1_GENA; /*!< PWM1 Generator A Control */
__IO uint32_t _1_GENB; /*!< PWM1 Generator B Control */
__IO uint32_t _1_DBCTL; /*!< PWM1 Dead-Band Control */
__IO uint32_t _1_DBRISE; /*!< PWM1 Dead-Band Rising-Edge Delay */
__IO uint32_t _1_DBFALL; /*!< PWM1 Dead-Band Falling-Edge-Delay */
__IO uint32_t _1_FLTSRC0; /*!< PWM1 Fault Source 0 */
__IO uint32_t _1_FLTSRC1; /*!< PWM1 Fault Source 1 */
__IO uint32_t _1_MINFLTPER; /*!< PWM1 Minimum Fault Period */
__IO uint32_t _2_CTL; /*!< PWM2 Control */
__IO uint32_t _2_INTEN; /*!< PWM2 Interrupt and Trigger Enable */
__IO uint32_t _2_RIS; /*!< PWM2 Raw Interrupt Status */
__IO uint32_t _2_ISC; /*!< PWM2 Interrupt Status and Clear */
__IO uint32_t _2_LOAD; /*!< PWM2 Load */
__IO uint32_t _2_COUNT; /*!< PWM2 Counter */
__IO uint32_t _2_CMPA; /*!< PWM2 Compare A */
__IO uint32_t _2_CMPB; /*!< PWM2 Compare B */
__IO uint32_t _2_GENA; /*!< PWM2 Generator A Control */
__IO uint32_t _2_GENB; /*!< PWM2 Generator B Control */
__IO uint32_t _2_DBCTL; /*!< PWM2 Dead-Band Control */
__IO uint32_t _2_DBRISE; /*!< PWM2 Dead-Band Rising-Edge Delay */
__IO uint32_t _2_DBFALL; /*!< PWM2 Dead-Band Falling-Edge-Delay */
__IO uint32_t _2_FLTSRC0; /*!< PWM2 Fault Source 0 */
__IO uint32_t _2_FLTSRC1; /*!< PWM2 Fault Source 1 */
__IO uint32_t _2_MINFLTPER; /*!< PWM2 Minimum Fault Period */
__IO uint32_t _3_CTL; /*!< PWM3 Control */
__IO uint32_t _3_INTEN; /*!< PWM3 Interrupt and Trigger Enable */
__IO uint32_t _3_RIS; /*!< PWM3 Raw Interrupt Status */
__IO uint32_t _3_ISC; /*!< PWM3 Interrupt Status and Clear */
__IO uint32_t _3_LOAD; /*!< PWM3 Load */
__IO uint32_t _3_COUNT; /*!< PWM3 Counter */
__IO uint32_t _3_CMPA; /*!< PWM3 Compare A */
__IO uint32_t _3_CMPB; /*!< PWM3 Compare B */
__IO uint32_t _3_GENA; /*!< PWM3 Generator A Control */
__IO uint32_t _3_GENB; /*!< PWM3 Generator B Control */
__IO uint32_t _3_DBCTL; /*!< PWM3 Dead-Band Control */
__IO uint32_t _3_DBRISE; /*!< PWM3 Dead-Band Rising-Edge Delay */
__IO uint32_t _3_DBFALL; /*!< PWM3 Dead-Band Falling-Edge-Delay */
__IO uint32_t _3_FLTSRC0; /*!< PWM3 Fault Source 0 */
__IO uint32_t _3_FLTSRC1; /*!< PWM3 Fault Source 1 */
__IO uint32_t _3_MINFLTPER; /*!< PWM3 Minimum Fault Period */
__I uint32_t RESERVED1[432];
__IO uint32_t _0_FLTSEN; /*!< PWM0 Fault Pin Logic Sense */
__I uint32_t _0_FLTSTAT0; /*!< PWM0 Fault Status 0 */
__I uint32_t _0_FLTSTAT1; /*!< PWM0 Fault Status 1 */
__I uint32_t RESERVED2[29];
__IO uint32_t _1_FLTSEN; /*!< PWM1 Fault Pin Logic Sense */
__I uint32_t _1_FLTSTAT0; /*!< PWM1 Fault Status 0 */
__I uint32_t _1_FLTSTAT1; /*!< PWM1 Fault Status 1 */
__I uint32_t RESERVED3[29];
__IO uint32_t _2_FLTSEN; /*!< PWM2 Fault Pin Logic Sense */
__I uint32_t _2_FLTSTAT0; /*!< PWM2 Fault Status 0 */
__I uint32_t _2_FLTSTAT1; /*!< PWM2 Fault Status 1 */
__I uint32_t RESERVED4[29];
__IO uint32_t _3_FLTSEN; /*!< PWM3 Fault Pin Logic Sense */
__I uint32_t _3_FLTSTAT0; /*!< PWM3 Fault Status 0 */
__I uint32_t _3_FLTSTAT1; /*!< PWM3 Fault Status 1 */
__I uint32_t RESERVED5[397];
__IO uint32_t PP; /*!< PWM Peripheral Properties */
__I uint32_t RESERVED6;
__IO uint32_t CC; /*!< PWM Clock Configuration */
} PWM0_Type;
/* ================================================================================ */
/* ================ QEI0 ================ */
/* ================================================================================ */
/**
* @brief Register map for QEI0 peripheral (QEI0)
*/
typedef struct /*!< QEI0 Structure */
{
__IO uint32_t CTL; /*!< QEI Control */
__IO uint32_t STAT; /*!< QEI Status */
__IO uint32_t POS; /*!< QEI Position */
__IO uint32_t MAXPOS; /*!< QEI Maximum Position */
__IO uint32_t LOAD; /*!< QEI Timer Load */
__IO uint32_t TIME; /*!< QEI Timer */
__IO uint32_t COUNT; /*!< QEI Velocity Counter */
__IO uint32_t SPEED; /*!< QEI Velocity */
__IO uint32_t INTEN; /*!< QEI Interrupt Enable */
__IO uint32_t RIS; /*!< QEI Raw Interrupt Status */
__IO uint32_t ISC; /*!< QEI Interrupt Status and Clear */
} QEI0_Type;
/* ================================================================================ */
/* ================ TIMER0 ================ */
/* ================================================================================ */
/**
* @brief Register map for TIMER0 peripheral (TIMER0)
*/
typedef struct /*!< TIMER0 Structure */
{
__IO uint32_t CFG; /*!< GPTM Configuration */
__IO uint32_t TAMR; /*!< GPTM Timer A Mode */
__IO uint32_t TBMR; /*!< GPTM Timer B Mode */
__IO uint32_t CTL; /*!< GPTM Control */
__IO uint32_t SYNC; /*!< GPTM Synchronize */
__I uint32_t RESERVED0;
__IO uint32_t IMR; /*!< GPTM Interrupt Mask */
__IO uint32_t RIS; /*!< GPTM Raw Interrupt Status */
__IO uint32_t MIS; /*!< GPTM Masked Interrupt Status */
__O uint32_t ICR; /*!< GPTM Interrupt Clear */
__IO uint32_t TAILR; /*!< GPTM Timer A Interval Load */
__IO uint32_t TBILR; /*!< GPTM Timer B Interval Load */
__IO uint32_t TAMATCHR; /*!< GPTM Timer A Match */
__IO uint32_t TBMATCHR; /*!< GPTM Timer B Match */
__IO uint32_t TAPR; /*!< GPTM Timer A Prescale */
__IO uint32_t TBPR; /*!< GPTM Timer B Prescale */
__IO uint32_t TAPMR; /*!< GPTM TimerA Prescale Match */
__IO uint32_t TBPMR; /*!< GPTM TimerB Prescale Match */
__IO uint32_t TAR; /*!< GPTM Timer A */
__IO uint32_t TBR; /*!< GPTM Timer B */
__IO uint32_t TAV; /*!< GPTM Timer A Value */
__IO uint32_t TBV; /*!< GPTM Timer B Value */
__IO uint32_t RTCPD; /*!< GPTM RTC Predivide */
__IO uint32_t TAPS; /*!< GPTM Timer A Prescale Snapshot */
__IO uint32_t TBPS; /*!< GPTM Timer B Prescale Snapshot */
__IO uint32_t TAPV; /*!< GPTM Timer A Prescale Value */
__IO uint32_t TBPV; /*!< GPTM Timer B Prescale Value */
__IO uint32_t DMAEV; /*!< GPTM DMA Event */
__IO uint32_t ADCEV; /*!< GPTM ADC Event */
__I uint32_t RESERVED1[979];
__IO uint32_t PP; /*!< GPTM Peripheral Properties */
} TIMER0_Type;
/* ================================================================================ */
/* ================ ADC0 ================ */
/* ================================================================================ */
/**
* @brief Register map for ADC0 peripheral (ADC0)
*/
typedef struct /*!< ADC0 Structure */
{
__IO uint32_t ACTSS; /*!< ADC Active Sample Sequencer */
__IO uint32_t RIS; /*!< ADC Raw Interrupt Status */
__IO uint32_t IM; /*!< ADC Interrupt Mask */
__IO uint32_t ISC; /*!< ADC Interrupt Status and Clear */
__IO uint32_t OSTAT; /*!< ADC Overflow Status */
__IO uint32_t EMUX; /*!< ADC Event Multiplexer Select */
__IO uint32_t USTAT; /*!< ADC Underflow Status */
__IO uint32_t TSSEL; /*!< ADC Trigger Source Select */
__IO uint32_t SSPRI; /*!< ADC Sample Sequencer Priority */
__IO uint32_t SPC; /*!< ADC Sample Phase Control */
__IO uint32_t PSSI; /*!< ADC Processor Sample Sequence Initiate */
__I uint32_t RESERVED0;
__IO uint32_t SAC; /*!< ADC Sample Averaging Control */
__IO uint32_t DCISC; /*!< ADC Digital Comparator Interrupt Status and Clear */
__IO uint32_t CTL; /*!< ADC Control */
__I uint32_t RESERVED1;
__IO uint32_t SSMUX0; /*!< ADC Sample Sequence Input Multiplexer Select 0 */
__IO uint32_t SSCTL0; /*!< ADC Sample Sequence Control 0 */
__IO uint32_t SSFIFO0; /*!< ADC Sample Sequence Result FIFO 0 */
__IO uint32_t SSFSTAT0; /*!< ADC Sample Sequence FIFO 0 Status */
__IO uint32_t SSOP0; /*!< ADC Sample Sequence 0 Operation */
__IO uint32_t SSDC0; /*!< ADC Sample Sequence 0 Digital Comparator Select */
__IO uint32_t SSEMUX0; /*!< ADC Sample Sequence Extended Input Multiplexer Select 0 */
__IO uint32_t SSTSH0; /*!< ADC Sample Sequence 0 Sample and Hold Time */
__IO uint32_t SSMUX1; /*!< ADC Sample Sequence Input Multiplexer Select 1 */
__IO uint32_t SSCTL1; /*!< ADC Sample Sequence Control 1 */
__IO uint32_t SSFIFO1; /*!< ADC Sample Sequence Result FIFO 1 */
__IO uint32_t SSFSTAT1; /*!< ADC Sample Sequence FIFO 1 Status */
__IO uint32_t SSOP1; /*!< ADC Sample Sequence 1 Operation */
__IO uint32_t SSDC1; /*!< ADC Sample Sequence 1 Digital Comparator Select */
__IO uint32_t SSEMUX1; /*!< ADC Sample Sequence Extended Input Multiplexer Select 1 */
__IO uint32_t SSTSH1; /*!< ADC Sample Sequence 1 Sample and Hold Time */
__IO uint32_t SSMUX2; /*!< ADC Sample Sequence Input Multiplexer Select 2 */
__IO uint32_t SSCTL2; /*!< ADC Sample Sequence Control 2 */
__IO uint32_t SSFIFO2; /*!< ADC Sample Sequence Result FIFO 2 */
__IO uint32_t SSFSTAT2; /*!< ADC Sample Sequence FIFO 2 Status */
__IO uint32_t SSOP2; /*!< ADC Sample Sequence 2 Operation */
__IO uint32_t SSDC2; /*!< ADC Sample Sequence 2 Digital Comparator Select */
__IO uint32_t SSEMUX2; /*!< ADC Sample Sequence Extended Input Multiplexer Select 2 */
__IO uint32_t SSTSH2; /*!< ADC Sample Sequence 2 Sample and Hold Time */
__IO uint32_t SSMUX3; /*!< ADC Sample Sequence Input Multiplexer Select 3 */
__IO uint32_t SSCTL3; /*!< ADC Sample Sequence Control 3 */
__IO uint32_t SSFIFO3; /*!< ADC Sample Sequence Result FIFO 3 */
__IO uint32_t SSFSTAT3; /*!< ADC Sample Sequence FIFO 3 Status */
__IO uint32_t SSOP3; /*!< ADC Sample Sequence 3 Operation */
__IO uint32_t SSDC3; /*!< ADC Sample Sequence 3 Digital Comparator Select */
__IO uint32_t SSEMUX3; /*!< ADC Sample Sequence Extended Input Multiplexer Select 3 */
__IO uint32_t SSTSH3; /*!< ADC Sample Sequence 3 Sample and Hold Time */
__I uint32_t RESERVED2[784];
__O uint32_t DCRIC; /*!< ADC Digital Comparator Reset Initial Conditions */
__I uint32_t RESERVED3[63];
__IO uint32_t DCCTL0; /*!< ADC Digital Comparator Control 0 */
__IO uint32_t DCCTL1; /*!< ADC Digital Comparator Control 1 */
__IO uint32_t DCCTL2; /*!< ADC Digital Comparator Control 2 */
__IO uint32_t DCCTL3; /*!< ADC Digital Comparator Control 3 */
__IO uint32_t DCCTL4; /*!< ADC Digital Comparator Control 4 */
__IO uint32_t DCCTL5; /*!< ADC Digital Comparator Control 5 */
__IO uint32_t DCCTL6; /*!< ADC Digital Comparator Control 6 */
__IO uint32_t DCCTL7; /*!< ADC Digital Comparator Control 7 */
__I uint32_t RESERVED4[8];
__IO uint32_t DCCMP0; /*!< ADC Digital Comparator Range 0 */
__IO uint32_t DCCMP1; /*!< ADC Digital Comparator Range 1 */
__IO uint32_t DCCMP2; /*!< ADC Digital Comparator Range 2 */
__IO uint32_t DCCMP3; /*!< ADC Digital Comparator Range 3 */
__IO uint32_t DCCMP4; /*!< ADC Digital Comparator Range 4 */
__IO uint32_t DCCMP5; /*!< ADC Digital Comparator Range 5 */
__IO uint32_t DCCMP6; /*!< ADC Digital Comparator Range 6 */
__IO uint32_t DCCMP7; /*!< ADC Digital Comparator Range 7 */
__I uint32_t RESERVED5[88];
__IO uint32_t PP; /*!< ADC Peripheral Properties */
__IO uint32_t PC; /*!< ADC Peripheral Configuration */
__IO uint32_t CC; /*!< ADC Clock Configuration */
} ADC0_Type;
/* ================================================================================ */
/* ================ COMP ================ */
/* ================================================================================ */
/**
* @brief Register map for COMP peripheral (COMP)
*/
typedef struct /*!< COMP Structure */
{
__IO uint32_t ACMIS; /*!< Analog Comparator Masked Interrupt Status */
__IO uint32_t ACRIS; /*!< Analog Comparator Raw Interrupt Status */
__IO uint32_t ACINTEN; /*!< Analog Comparator Interrupt Enable */
__I uint32_t RESERVED0;
__IO uint32_t ACREFCTL; /*!< Analog Comparator Reference Voltage Control */
__I uint32_t RESERVED1[3];
__IO uint32_t ACSTAT0; /*!< Analog Comparator Status 0 */
__IO uint32_t ACCTL0; /*!< Analog Comparator Control 0 */
__I uint32_t RESERVED2[6];
__IO uint32_t ACSTAT1; /*!< Analog Comparator Status 1 */
__IO uint32_t ACCTL1; /*!< Analog Comparator Control 1 */
__I uint32_t RESERVED3[6];
__IO uint32_t ACSTAT2; /*!< Analog Comparator Status 2 */
__IO uint32_t ACCTL2; /*!< Analog Comparator Control 2 */
__I uint32_t RESERVED4[982];
__IO uint32_t PP; /*!< Analog Comparator Peripheral Properties */
} COMP_Type;
/* ================================================================================ */
/* ================ CAN0 ================ */
/* ================================================================================ */
/**
* @brief Register map for CAN0 peripheral (CAN0)
*/
typedef struct /*!< CAN0 Structure */
{
__IO uint32_t CTL; /*!< CAN Control */
__IO uint32_t STS; /*!< CAN Status */
__IO uint32_t ERR; /*!< CAN Error Counter */
__IO uint32_t BIT; /*!< CAN Bit Timing */
__IO uint32_t INT; /*!< CAN Interrupt */
__IO uint32_t TST; /*!< CAN Test */
__IO uint32_t BRPE; /*!< CAN Baud Rate Prescaler Extension */
__I uint32_t RESERVED0;
__IO uint32_t IF1CRQ; /*!< CAN IF1 Command Request */
__IO uint32_t IF1CMSK; /*!< CAN IF1 Command Mask */
__IO uint32_t IF1MSK1; /*!< CAN IF1 Mask 1 */
__IO uint32_t IF1MSK2; /*!< CAN IF1 Mask 2 */
__IO uint32_t IF1ARB1; /*!< CAN IF1 Arbitration 1 */
__IO uint32_t IF1ARB2; /*!< CAN IF1 Arbitration 2 */
__IO uint32_t IF1MCTL; /*!< CAN IF1 Message Control */
__IO uint32_t IF1DA1; /*!< CAN IF1 Data A1 */
__IO uint32_t IF1DA2; /*!< CAN IF1 Data A2 */
__IO uint32_t IF1DB1; /*!< CAN IF1 Data B1 */
__IO uint32_t IF1DB2; /*!< CAN IF1 Data B2 */
__I uint32_t RESERVED1[13];
__IO uint32_t IF2CRQ; /*!< CAN IF2 Command Request */
__IO uint32_t IF2CMSK; /*!< CAN IF2 Command Mask */
__IO uint32_t IF2MSK1; /*!< CAN IF2 Mask 1 */
__IO uint32_t IF2MSK2; /*!< CAN IF2 Mask 2 */
__IO uint32_t IF2ARB1; /*!< CAN IF2 Arbitration 1 */
__IO uint32_t IF2ARB2; /*!< CAN IF2 Arbitration 2 */
__IO uint32_t IF2MCTL; /*!< CAN IF2 Message Control */
__IO uint32_t IF2DA1; /*!< CAN IF2 Data A1 */
__IO uint32_t IF2DA2; /*!< CAN IF2 Data A2 */
__IO uint32_t IF2DB1; /*!< CAN IF2 Data B1 */
__IO uint32_t IF2DB2; /*!< CAN IF2 Data B2 */
__I uint32_t RESERVED2[21];
__IO uint32_t TXRQ1; /*!< CAN Transmission Request 1 */
__IO uint32_t TXRQ2; /*!< CAN Transmission Request 2 */
__I uint32_t RESERVED3[6];
__IO uint32_t NWDA1; /*!< CAN New Data 1 */
__IO uint32_t NWDA2; /*!< CAN New Data 2 */
__I uint32_t RESERVED4[6];
__IO uint32_t MSG1INT; /*!< CAN Message 1 Interrupt Pending */
__IO uint32_t MSG2INT; /*!< CAN Message 2 Interrupt Pending */
__I uint32_t RESERVED5[6];
__IO uint32_t MSG1VAL; /*!< CAN Message 1 Valid */
__IO uint32_t MSG2VAL; /*!< CAN Message 2 Valid */
} CAN0_Type;
/* ================================================================================ */
/* ================ USB0 ================ */
/* ================================================================================ */
/**
* @brief Register map for USB0 peripheral (USB0)
*/
typedef struct /*!< USB0 Structure */
{
__IO uint8_t FADDR; /*!< USB Device Functional Address */
__IO uint8_t POWER; /*!< USB Power */
__IO uint16_t TXIS; /*!< USB Transmit Interrupt Status */
__IO uint16_t RXIS; /*!< USB Receive Interrupt Status */
__IO uint16_t TXIE; /*!< USB Transmit Interrupt Enable */
__IO uint16_t RXIE; /*!< USB Receive Interrupt Enable */
__IO uint8_t IS; /*!< USB General Interrupt Status */
__IO uint8_t IE; /*!< USB Interrupt Enable */
__IO uint16_t FRAME; /*!< USB Frame Value */
__IO uint8_t EPIDX; /*!< USB Endpoint Index */
__IO uint8_t TEST; /*!< USB Test Mode */
__I uint32_t RESERVED0[4];
union
{
__IO uint8_t FIFO0_BYTE; /*!< USB FIFO Endpoint 0 */
__IO uint16_t FIFO0_HALF; /*!< USB FIFO Endpoint 0 */
__IO uint32_t FIFO0_WORD; /*!< USB FIFO Endpoint 0 */
};
union
{
__IO uint8_t FIFO1_BYTE; /*!< USB FIFO Endpoint 1 */
__IO uint16_t FIFO1_HALF; /*!< USB FIFO Endpoint 1 */
__IO uint32_t FIFO1_WORD; /*!< USB FIFO Endpoint 1 */
};
union
{
__IO uint8_t FIFO2_BYTE; /*!< USB FIFO Endpoint 2 */
__IO uint16_t FIFO2_HALF; /*!< USB FIFO Endpoint 2 */
__IO uint32_t FIFO2_WORD; /*!< USB FIFO Endpoint 2 */
};
union
{
__IO uint8_t FIFO3_BYTE; /*!< USB FIFO Endpoint 3 */
__IO uint16_t FIFO3_HALF; /*!< USB FIFO Endpoint 3 */
__IO uint32_t FIFO3_WORD; /*!< USB FIFO Endpoint 3 */
};
union
{
__IO uint8_t FIFO4_BYTE; /*!< USB FIFO Endpoint 4 */
__IO uint16_t FIFO4_HALF; /*!< USB FIFO Endpoint 4 */
__IO uint32_t FIFO4_WORD; /*!< USB FIFO Endpoint 4 */
};
union
{
__IO uint8_t FIFO5_BYTE; /*!< USB FIFO Endpoint 5 */
__IO uint16_t FIFO5_HALF; /*!< USB FIFO Endpoint 5 */
__IO uint32_t FIFO5_WORD; /*!< USB FIFO Endpoint 5 */
};
union
{
__IO uint8_t FIFO6_BYTE; /*!< USB FIFO Endpoint 6 */
__IO uint16_t FIFO6_HALF; /*!< USB FIFO Endpoint 6 */
__IO uint32_t FIFO6_WORD; /*!< USB FIFO Endpoint 6 */
};
union
{
__IO uint8_t FIFO7_BYTE; /*!< USB FIFO Endpoint 7 */
__IO uint16_t FIFO7_HALF; /*!< USB FIFO Endpoint 7 */
__IO uint32_t FIFO7_WORD; /*!< USB FIFO Endpoint 7 */
};
__I uint32_t RESERVED1[8];
__IO uint8_t DEVCTL; /*!< USB Device Control */
__IO uint8_t CCONF; /*!< USB Common Configuration */
__IO uint8_t TXFIFOSZ; /*!< USB Transmit Dynamic FIFO Sizing */
__IO uint8_t RXFIFOSZ; /*!< USB Receive Dynamic FIFO Sizing */
__IO uint16_t TXFIFOADD; /*!< USB Transmit FIFO Start Address */
__IO uint16_t RXFIFOADD; /*!< USB Receive FIFO Start Address */
__I uint32_t RESERVED2[2];
__IO uint8_t ULPIVBUSCTL; /*!< USB ULPI VBUS Control */
__I uint8_t RESERVED3[3];
__IO uint8_t ULPIREGDATA; /*!< USB ULPI Register Data */
__IO uint8_t ULPIREGADDR; /*!< USB ULPI Register Address */
__IO uint8_t ULPIREGCTL; /*!< USB ULPI Register Control */
__I uint8_t RESERVED4;
__IO uint8_t EPINFO; /*!< USB Endpoint Information */
__IO uint8_t RAMINFO; /*!< USB RAM Information */
__IO uint8_t CONTIM; /*!< USB Connect Timing */
__IO uint8_t VPLEN; /*!< USB OTG VBUS Pulse Timing */
__IO uint8_t HSEOF; /*!< USB High-Speed Last Transaction to End of Frame Timing */
__IO uint8_t FSEOF; /*!< USB Full-Speed Last Transaction to End of Frame Timing */
__IO uint8_t LSEOF; /*!< USB Low-Speed Last Transaction to End of Frame Timing */
__I uint8_t RESERVED5;
__IO uint8_t TXFUNCADDR0; /*!< USB Transmit Functional Address Endpoint 0 */
__I uint8_t RESERVED6;
__IO uint8_t TXHUBADDR0; /*!< USB Transmit Hub Address Endpoint 0 */
__IO uint8_t TXHUBPORT0; /*!< USB Transmit Hub Port Endpoint 0 */
__I uint32_t RESERVED7;
__IO uint8_t TXFUNCADDR1; /*!< USB Transmit Functional Address Endpoint 1 */
__I uint8_t RESERVED8;
__IO uint8_t TXHUBADDR1; /*!< USB Transmit Hub Address Endpoint 1 */
__IO uint8_t TXHUBPORT1; /*!< USB Transmit Hub Port Endpoint 1 */
__IO uint8_t RXFUNCADDR1; /*!< USB Receive Functional Address Endpoint 1 */
__I uint8_t RESERVED9;
__IO uint8_t RXHUBADDR1; /*!< USB Receive Hub Address Endpoint 1 */
__IO uint8_t RXHUBPORT1; /*!< USB Receive Hub Port Endpoint 1 */
__IO uint8_t TXFUNCADDR2; /*!< USB Transmit Functional Address Endpoint 2 */
__I uint8_t RESERVED10;
__IO uint8_t TXHUBADDR2; /*!< USB Transmit Hub Address Endpoint 2 */
__IO uint8_t TXHUBPORT2; /*!< USB Transmit Hub Port Endpoint 2 */
__IO uint8_t RXFUNCADDR2; /*!< USB Receive Functional Address Endpoint 2 */
__I uint8_t RESERVED11;
__IO uint8_t RXHUBADDR2; /*!< USB Receive Hub Address Endpoint 2 */
__IO uint8_t RXHUBPORT2; /*!< USB Receive Hub Port Endpoint 2 */
__IO uint8_t TXFUNCADDR3; /*!< USB Transmit Functional Address Endpoint 3 */
__I uint8_t RESERVED12;
__IO uint8_t TXHUBADDR3; /*!< USB Transmit Hub Address Endpoint 3 */
__IO uint8_t TXHUBPORT3; /*!< USB Transmit Hub Port Endpoint 3 */
__IO uint8_t RXFUNCADDR3; /*!< USB Receive Functional Address Endpoint 3 */
__I uint8_t RESERVED13;
__IO uint8_t RXHUBADDR3; /*!< USB Receive Hub Address Endpoint 3 */
__IO uint8_t RXHUBPORT3; /*!< USB Receive Hub Port Endpoint 3 */
__IO uint8_t TXFUNCADDR4; /*!< USB Transmit Functional Address Endpoint 4 */
__I uint8_t RESERVED14;
__IO uint8_t TXHUBADDR4; /*!< USB Transmit Hub Address Endpoint 4 */
__IO uint8_t TXHUBPORT4; /*!< USB Transmit Hub Port Endpoint 4 */
__IO uint8_t RXFUNCADDR4; /*!< USB Receive Functional Address Endpoint 4 */
__I uint8_t RESERVED15;
__IO uint8_t RXHUBADDR4; /*!< USB Receive Hub Address Endpoint 4 */
__IO uint8_t RXHUBPORT4; /*!< USB Receive Hub Port Endpoint 4 */
__IO uint8_t TXFUNCADDR5; /*!< USB Transmit Functional Address Endpoint 5 */
__I uint8_t RESERVED16;
__IO uint8_t TXHUBADDR5; /*!< USB Transmit Hub Address Endpoint 5 */
__IO uint8_t TXHUBPORT5; /*!< USB Transmit Hub Port Endpoint 5 */
__IO uint8_t RXFUNCADDR5; /*!< USB Receive Functional Address Endpoint 5 */
__I uint8_t RESERVED17;
__IO uint8_t RXHUBADDR5; /*!< USB Receive Hub Address Endpoint 5 */
__IO uint8_t RXHUBPORT5; /*!< USB Receive Hub Port Endpoint 5 */
__IO uint8_t TXFUNCADDR6; /*!< USB Transmit Functional Address Endpoint 6 */
__I uint8_t RESERVED18;
__IO uint8_t TXHUBADDR6; /*!< USB Transmit Hub Address Endpoint 6 */
__IO uint8_t TXHUBPORT6; /*!< USB Transmit Hub Port Endpoint 6 */
__IO uint8_t RXFUNCADDR6; /*!< USB Receive Functional Address Endpoint 6 */
__I uint8_t RESERVED19;
__IO uint8_t RXHUBADDR6; /*!< USB Receive Hub Address Endpoint 6 */
__IO uint8_t RXHUBPORT6; /*!< USB Receive Hub Port Endpoint 6 */
__IO uint8_t TXFUNCADDR7; /*!< USB Transmit Functional Address Endpoint 7 */
__I uint8_t RESERVED20;
__IO uint8_t TXHUBADDR7; /*!< USB Transmit Hub Address Endpoint 7 */
__IO uint8_t TXHUBPORT7; /*!< USB Transmit Hub Port Endpoint 7 */
__IO uint8_t RXFUNCADDR7; /*!< USB Receive Functional Address Endpoint 7 */
__I uint8_t RESERVED21;
__IO uint8_t RXHUBADDR7; /*!< USB Receive Hub Address Endpoint 7 */
__IO uint8_t RXHUBPORT7; /*!< USB Receive Hub Port Endpoint 7 */
__I uint32_t RESERVED22[16];
__I uint16_t RESERVED23;
__O uint8_t CSRL0; /*!< USB Control and Status Endpoint 0 Low */
__O uint8_t CSRH0; /*!< USB Control and Status Endpoint 0 High */
__I uint16_t RESERVED24[2];
__IO uint8_t COUNT0; /*!< USB Receive Byte Count Endpoint 0 */
__I uint8_t RESERVED25;
__IO uint8_t TYPE0; /*!< USB Type Endpoint 0 */
__IO uint8_t NAKLMT; /*!< USB NAK Limit */
__I uint32_t RESERVED26;
__IO uint16_t TXMAXP1; /*!< USB Maximum Transmit Data Endpoint 1 */
__IO uint8_t TXCSRL1; /*!< USB Transmit Control and Status Endpoint 1 Low */
__IO uint8_t TXCSRH1; /*!< USB Transmit Control and Status Endpoint 1 High */
__IO uint16_t RXMAXP1; /*!< USB Maximum Receive Data Endpoint 1 */
__IO uint8_t RXCSRL1; /*!< USB Receive Control and Status Endpoint 1 Low */
__IO uint8_t RXCSRH1; /*!< USB Receive Control and Status Endpoint 1 High */
__IO uint16_t RXCOUNT1; /*!< USB Receive Byte Count Endpoint 1 */
__IO uint8_t TXTYPE1; /*!< USB Host Transmit Configure Type Endpoint 1 */
__IO uint8_t TXINTERVAL1; /*!< USB Host Transmit Interval Endpoint 1 */
__IO uint8_t RXTYPE1; /*!< USB Host Configure Receive Type Endpoint 1 */
__IO uint8_t RXINTERVAL1; /*!< USB Host Receive Polling Interval Endpoint 1 */
__I uint16_t RESERVED27;
__IO uint16_t TXMAXP2; /*!< USB Maximum Transmit Data Endpoint 2 */
__IO uint8_t TXCSRL2; /*!< USB Transmit Control and Status Endpoint 2 Low */
__IO uint8_t TXCSRH2; /*!< USB Transmit Control and Status Endpoint 2 High */
__IO uint16_t RXMAXP2; /*!< USB Maximum Receive Data Endpoint 2 */
__IO uint8_t RXCSRL2; /*!< USB Receive Control and Status Endpoint 2 Low */
__IO uint8_t RXCSRH2; /*!< USB Receive Control and Status Endpoint 2 High */
__IO uint16_t RXCOUNT2; /*!< USB Receive Byte Count Endpoint 2 */
__IO uint8_t TXTYPE2; /*!< USB Host Transmit Configure Type Endpoint 2 */
__IO uint8_t TXINTERVAL2; /*!< USB Host Transmit Interval Endpoint 2 */
__IO uint8_t RXTYPE2; /*!< USB Host Configure Receive Type Endpoint 2 */
__IO uint8_t RXINTERVAL2; /*!< USB Host Receive Polling Interval Endpoint 2 */
__I uint16_t RESERVED28;
__IO uint16_t TXMAXP3; /*!< USB Maximum Transmit Data Endpoint 3 */
__IO uint8_t TXCSRL3; /*!< USB Transmit Control and Status Endpoint 3 Low */
__IO uint8_t TXCSRH3; /*!< USB Transmit Control and Status Endpoint 3 High */
__IO uint16_t RXMAXP3; /*!< USB Maximum Receive Data Endpoint 3 */
__IO uint8_t RXCSRL3; /*!< USB Receive Control and Status Endpoint 3 Low */
__IO uint8_t RXCSRH3; /*!< USB Receive Control and Status Endpoint 3 High */
__IO uint16_t RXCOUNT3; /*!< USB Receive Byte Count Endpoint 3 */
__IO uint8_t TXTYPE3; /*!< USB Host Transmit Configure Type Endpoint 3 */
__IO uint8_t TXINTERVAL3; /*!< USB Host Transmit Interval Endpoint 3 */
__IO uint8_t RXTYPE3; /*!< USB Host Configure Receive Type Endpoint 3 */
__IO uint8_t RXINTERVAL3; /*!< USB Host Receive Polling Interval Endpoint 3 */
__I uint16_t RESERVED29;
__IO uint16_t TXMAXP4; /*!< USB Maximum Transmit Data Endpoint 4 */
__IO uint8_t TXCSRL4; /*!< USB Transmit Control and Status Endpoint 4 Low */
__IO uint8_t TXCSRH4; /*!< USB Transmit Control and Status Endpoint 4 High */
__IO uint16_t RXMAXP4; /*!< USB Maximum Receive Data Endpoint 4 */
__IO uint8_t RXCSRL4; /*!< USB Receive Control and Status Endpoint 4 Low */
__IO uint8_t RXCSRH4; /*!< USB Receive Control and Status Endpoint 4 High */
__IO uint16_t RXCOUNT4; /*!< USB Receive Byte Count Endpoint 4 */
__IO uint8_t TXTYPE4; /*!< USB Host Transmit Configure Type Endpoint 4 */
__IO uint8_t TXINTERVAL4; /*!< USB Host Transmit Interval Endpoint 4 */
__IO uint8_t RXTYPE4; /*!< USB Host Configure Receive Type Endpoint 4 */
__IO uint8_t RXINTERVAL4; /*!< USB Host Receive Polling Interval Endpoint 4 */
__I uint16_t RESERVED30;
__IO uint16_t TXMAXP5; /*!< USB Maximum Transmit Data Endpoint 5 */
__IO uint8_t TXCSRL5; /*!< USB Transmit Control and Status Endpoint 5 Low */
__IO uint8_t TXCSRH5; /*!< USB Transmit Control and Status Endpoint 5 High */
__IO uint16_t RXMAXP5; /*!< USB Maximum Receive Data Endpoint 5 */
__IO uint8_t RXCSRL5; /*!< USB Receive Control and Status Endpoint 5 Low */
__IO uint8_t RXCSRH5; /*!< USB Receive Control and Status Endpoint 5 High */
__IO uint16_t RXCOUNT5; /*!< USB Receive Byte Count Endpoint 5 */
__IO uint8_t TXTYPE5; /*!< USB Host Transmit Configure Type Endpoint 5 */
__IO uint8_t TXINTERVAL5; /*!< USB Host Transmit Interval Endpoint 5 */
__IO uint8_t RXTYPE5; /*!< USB Host Configure Receive Type Endpoint 5 */
__IO uint8_t RXINTERVAL5; /*!< USB Host Receive Polling Interval Endpoint 5 */
__I uint16_t RESERVED31;
__IO uint16_t TXMAXP6; /*!< USB Maximum Transmit Data Endpoint 6 */
__IO uint8_t TXCSRL6; /*!< USB Transmit Control and Status Endpoint 6 Low */
__IO uint8_t TXCSRH6; /*!< USB Transmit Control and Status Endpoint 6 High */
__IO uint16_t RXMAXP6; /*!< USB Maximum Receive Data Endpoint 6 */
__IO uint8_t RXCSRL6; /*!< USB Receive Control and Status Endpoint 6 Low */
__IO uint8_t RXCSRH6; /*!< USB Receive Control and Status Endpoint 6 High */
__IO uint16_t RXCOUNT6; /*!< USB Receive Byte Count Endpoint 6 */
__IO uint8_t TXTYPE6; /*!< USB Host Transmit Configure Type Endpoint 6 */
__IO uint8_t TXINTERVAL6; /*!< USB Host Transmit Interval Endpoint 6 */
__IO uint8_t RXTYPE6; /*!< USB Host Configure Receive Type Endpoint 6 */
__IO uint8_t RXINTERVAL6; /*!< USB Host Receive Polling Interval Endpoint 6 */
__I uint16_t RESERVED32;
__IO uint16_t TXMAXP7; /*!< USB Maximum Transmit Data Endpoint 7 */
__IO uint8_t TXCSRL7; /*!< USB Transmit Control and Status Endpoint 7 Low */
__IO uint8_t TXCSRH7; /*!< USB Transmit Control and Status Endpoint 7 High */
__IO uint16_t RXMAXP7; /*!< USB Maximum Receive Data Endpoint 7 */
__IO uint8_t RXCSRL7; /*!< USB Receive Control and Status Endpoint 7 Low */
__IO uint8_t RXCSRH7; /*!< USB Receive Control and Status Endpoint 7 High */
__IO uint16_t RXCOUNT7; /*!< USB Receive Byte Count Endpoint 7 */
__IO uint8_t TXTYPE7; /*!< USB Host Transmit Configure Type Endpoint 7 */
__IO uint8_t TXINTERVAL7; /*!< USB Host Transmit Interval Endpoint 7 */
__IO uint8_t RXTYPE7; /*!< USB Host Configure Receive Type Endpoint 7 */
__IO uint8_t RXINTERVAL7; /*!< USB Host Receive Polling Interval Endpoint 7 */
__I uint16_t RESERVED33[65];
__IO uint8_t DMAINTR; /*!< USB DMA Interrupt */
__I uint8_t RESERVED34[3];
__IO uint16_t DMACTL0; /*!< USB DMA Control 0 */
__I uint16_t RESERVED35;
__IO uint32_t DMAADDR0; /*!< USB DMA Address 0 */
__IO uint32_t DMACOUNT0; /*!< USB DMA Count 0 */
__I uint32_t RESERVED36;
__IO uint16_t DMACTL1; /*!< USB DMA Control 1 */
__I uint16_t RESERVED37;
__IO uint32_t DMAADDR1; /*!< USB DMA Address 1 */
__IO uint32_t DMACOUNT1; /*!< USB DMA Count 1 */
__I uint32_t RESERVED38;
__IO uint16_t DMACTL2; /*!< USB DMA Control 2 */
__I uint16_t RESERVED39;
__IO uint32_t DMAADDR2; /*!< USB DMA Address 2 */
__IO uint32_t DMACOUNT2; /*!< USB DMA Count 2 */
__I uint32_t RESERVED40;
__IO uint16_t DMACTL3; /*!< USB DMA Control 3 */
__I uint16_t RESERVED41;
__IO uint32_t DMAADDR3; /*!< USB DMA Address 3 */
__IO uint32_t DMACOUNT3; /*!< USB DMA Count 3 */
__I uint32_t RESERVED42;
__IO uint16_t DMACTL4; /*!< USB DMA Control 4 */
__I uint16_t RESERVED43;
__IO uint32_t DMAADDR4; /*!< USB DMA Address 4 */
__IO uint32_t DMACOUNT4; /*!< USB DMA Count 4 */
__I uint32_t RESERVED44;
__IO uint16_t DMACTL5; /*!< USB DMA Control 5 */
__I uint16_t RESERVED45;
__IO uint32_t DMAADDR5; /*!< USB DMA Address 5 */
__IO uint32_t DMACOUNT5; /*!< USB DMA Count 5 */
__I uint32_t RESERVED46;
__IO uint16_t DMACTL6; /*!< USB DMA Control 6 */
__I uint16_t RESERVED47;
__IO uint32_t DMAADDR6; /*!< USB DMA Address 6 */
__IO uint32_t DMACOUNT6; /*!< USB DMA Count 6 */
__I uint32_t RESERVED48;
__IO uint16_t DMACTL7; /*!< USB DMA Control 7 */
__I uint16_t RESERVED49;
__IO uint32_t DMAADDR7; /*!< USB DMA Address 7 */
__IO uint32_t DMACOUNT7; /*!< USB DMA Count 7 */
__I uint32_t RESERVED50[33];
__IO uint16_t RQPKTCOUNT1; /*!< USB Request Packet Count in Block Transfer Endpoint 1 */
__I uint16_t RESERVED51;
__IO uint16_t RQPKTCOUNT2; /*!< USB Request Packet Count in Block Transfer Endpoint 2 */
__I uint16_t RESERVED52;
__IO uint16_t RQPKTCOUNT3; /*!< USB Request Packet Count in Block Transfer Endpoint 3 */
__I uint16_t RESERVED53;
__IO uint16_t RQPKTCOUNT4; /*!< USB Request Packet Count in Block Transfer Endpoint 4 */
__I uint16_t RESERVED54;
__IO uint16_t RQPKTCOUNT5; /*!< USB Request Packet Count in Block Transfer Endpoint 5 */
__I uint16_t RESERVED55;
__IO uint16_t RQPKTCOUNT6; /*!< USB Request Packet Count in Block Transfer Endpoint 6 */
__I uint16_t RESERVED56;
__IO uint16_t RQPKTCOUNT7; /*!< USB Request Packet Count in Block Transfer Endpoint 7 */
__I uint16_t RESERVED57[17];
__IO uint16_t RXDPKTBUFDIS; /*!< USB Receive Double Packet Buffer Disable */
__IO uint16_t TXDPKTBUFDIS; /*!< USB Transmit Double Packet Buffer Disable */
__IO uint16_t CTO; /*!< USB Chirp Timeout */
__IO uint16_t HHSRTN; /*!< USB High Speed to UTM Operating Delay */
__IO uint16_t HSBT; /*!< USB High Speed Time-out Adder */
__I uint16_t RESERVED58[11];
__IO uint16_t LPMATTR; /*!< USB LPM Attributes */
__IO uint8_t LPMCNTRL; /*!< USB LPM Control */
__IO uint8_t LPMIM; /*!< USB LPM Interrupt Mask */
__IO uint8_t LPMRIS; /*!< USB LPM Raw Interrupt Status */
__IO uint8_t LPMFADDR; /*!< USB LPM Function Address */
__I uint16_t RESERVED59[77];
__IO uint32_t EPC; /*!< USB External Power Control */
__IO uint32_t EPCRIS; /*!< USB External Power Control Raw Interrupt Status */
__IO uint32_t EPCIM; /*!< USB External Power Control Interrupt Mask */
__IO uint32_t EPCISC; /*!< USB External Power Control Interrupt Status and Clear */
__IO uint32_t DRRIS; /*!< USB Device RESUME Raw Interrupt Status */
__IO uint32_t DRIM; /*!< USB Device RESUME Interrupt Mask */
__O uint32_t DRISC; /*!< USB Device RESUME Interrupt Status and Clear */
__IO uint32_t GPCS; /*!< USB General-Purpose Control and Status */
__I uint32_t RESERVED60[4];
__IO uint32_t VDC; /*!< USB VBUS Droop Control */
__IO uint32_t VDCRIS; /*!< USB VBUS Droop Control Raw Interrupt Status */
__IO uint32_t VDCIM; /*!< USB VBUS Droop Control Interrupt Mask */
__IO uint32_t VDCISC; /*!< USB VBUS Droop Control Interrupt Status and Clear */
__I uint32_t RESERVED61[736];
__IO uint32_t PP; /*!< USB Peripheral Properties */
__IO uint32_t PC; /*!< USB Peripheral Configuration */
__IO uint32_t CC; /*!< USB Clock Configuration */
} USB0_Type;
/* ================================================================================ */
/* ================ GPIO ================ */
/* ================================================================================ */
/**
* @brief Register map for GPIO peripheral (GPIO)
*/
typedef struct /*!< GPIO Structure */
{
__I uint32_t RESERVED0[255];
__IO uint32_t DATA; /*!< GPIO Data */
__IO uint32_t DIR; /*!< GPIO Direction */
__IO uint32_t IS; /*!< GPIO Interrupt Sense */
__IO uint32_t IBE; /*!< GPIO Interrupt Both Edges */
__IO uint32_t IEV; /*!< GPIO Interrupt Event */
__IO uint32_t IM; /*!< GPIO Interrupt Mask */
__IO uint32_t RIS; /*!< GPIO Raw Interrupt Status */
__IO uint32_t MIS; /*!< GPIO Masked Interrupt Status */
__O uint32_t ICR; /*!< GPIO Interrupt Clear */
__IO uint32_t AFSEL; /*!< GPIO Alternate Function Select */
__I uint32_t RESERVED1[55];
__IO uint32_t DR2R; /*!< GPIO 2-mA Drive Select */
__IO uint32_t DR4R; /*!< GPIO 4-mA Drive Select */
__IO uint32_t DR8R; /*!< GPIO 8-mA Drive Select */
__IO uint32_t ODR; /*!< GPIO Open Drain Select */
__IO uint32_t PUR; /*!< GPIO Pull-Up Select */
__IO uint32_t PDR; /*!< GPIO Pull-Down Select */
__IO uint32_t SLR; /*!< GPIO Slew Rate Control Select */
__IO uint32_t DEN; /*!< GPIO Digital Enable */
__IO uint32_t LOCK; /*!< GPIO Lock */
__IO uint32_t CR; /*!< GPIO Commit */
__IO uint32_t AMSEL; /*!< GPIO Analog Mode Select */
__IO uint32_t PCTL; /*!< GPIO Port Control */
__IO uint32_t ADCCTL; /*!< GPIO ADC Control */
__IO uint32_t DMACTL; /*!< GPIO DMA Control */
__IO uint32_t SI; /*!< GPIO Select Interrupt */
__IO uint32_t DR12R; /*!< GPIO 12-mA Drive Select */
__IO uint32_t WAKEPEN; /*!< GPIO Wake Pin Enable */
__IO uint32_t WAKELVL; /*!< GPIO Wake Level */
__IO uint32_t WAKESTAT; /*!< GPIO Wake Status */
__I uint32_t RESERVED2[669];
__IO uint32_t PP; /*!< GPIO Peripheral Property */
__IO uint32_t PC; /*!< GPIO Peripheral Configuration */
} GPIO_Type;
/* ================================================================================ */
/* ================ EEPROM ================ */
/* ================================================================================ */
/**
* @brief Register map for EEPROM peripheral (EEPROM)
*/
typedef struct /*!< EEPROM Structure */
{
__IO uint32_t EESIZE; /*!< EEPROM Size Information */
__IO uint32_t EEBLOCK; /*!< EEPROM Current Block */
__IO uint32_t EEOFFSET; /*!< EEPROM Current Offset */
__I uint32_t RESERVED0;
__IO uint32_t EERDWR; /*!< EEPROM Read-Write */
__IO uint32_t EERDWRINC; /*!< EEPROM Read-Write with Increment */
__IO uint32_t EEDONE; /*!< EEPROM Done Status */
__IO uint32_t EESUPP; /*!< EEPROM Support Control and Status */
__IO uint32_t EEUNLOCK; /*!< EEPROM Unlock */
__I uint32_t RESERVED1[3];
__IO uint32_t EEPROT; /*!< EEPROM Protection */
__IO uint32_t EEPASS0; /*!< EEPROM Password */
__IO uint32_t EEPASS1; /*!< EEPROM Password */
__IO uint32_t EEPASS2; /*!< EEPROM Password */
__IO uint32_t EEINT; /*!< EEPROM Interrupt */
__I uint32_t RESERVED2[3];
__IO uint32_t EEHIDE0; /*!< EEPROM Block Hide 0 */
__IO uint32_t EEHIDE1; /*!< EEPROM Block Hide 1 */
__IO uint32_t EEHIDE2; /*!< EEPROM Block Hide 2 */
__I uint32_t RESERVED3[9];
__IO uint32_t EEDBGME; /*!< EEPROM Debug Mass Erase */
__I uint32_t RESERVED4[975];
__IO uint32_t PP; /*!< EEPROM Peripheral Properties */
} EEPROM_Type;
/* ================================================================================ */
/* ================ ONEWIRE0 ================ */
/* ================================================================================ */
/**
* @brief Register map for ONEWIRE0 peripheral (ONEWIRE0)
*/
typedef struct /*!< ONEWIRE0 Structure */
{
__IO uint32_t CS; /*!< 1-Wire Control and Status */
__IO uint32_t TIM; /*!< 1-Wire Timing Override */
__IO uint32_t DATW; /*!< 1-Wire Data Write */
__IO uint32_t DATR; /*!< 1-Wire Data Read */
__I uint32_t RESERVED0[60];
__IO uint32_t IM; /*!< 1-Wire Interrupt Mask */
__IO uint32_t RIS; /*!< 1-Wire Raw Interrupt Status */
__IO uint32_t MIS; /*!< 1-Wire Masked Interrupt Status */
__IO uint32_t ICR; /*!< 1-Wire Interrupt Clear */
__I uint32_t RESERVED1[4];
__IO uint32_t DMA; /*!< 1-Wire uDMA Control */
__I uint32_t RESERVED2[935];
__IO uint32_t PP; /*!< 1-Wire Peripheral Properties */
} ONEWIRE0_Type;
/* ================================================================================ */
/* ================ EPI0 ================ */
/* ================================================================================ */
/**
* @brief Register map for EPI0 peripheral (EPI0)
*/
typedef struct /*!< EPI0 Structure */
{
__IO uint32_t CFG; /*!< EPI Configuration */
__IO uint32_t BAUD; /*!< EPI Main Baud Rate */
__IO uint32_t BAUD2; /*!< EPI Main Baud Rate */
__I uint32_t RESERVED0;
union
{
__IO uint32_t HB16CFG; /*!< EPI Host-Bus 16 Configuration */
__IO uint32_t GPCFG; /*!< EPI General-Purpose Configuration */
__IO uint32_t SDRAMCFG; /*!< EPI SDRAM Configuration */
__IO uint32_t HB8CFG; /*!< EPI Host-Bus 8 Configuration */
};
union
{
__IO uint32_t HB8CFG2; /*!< EPI Host-Bus 8 Configuration 2 */
__IO uint32_t HB16CFG2; /*!< EPI Host-Bus 16 Configuration 2 */
};
__I uint32_t RESERVED1;
__IO uint32_t ADDRMAP; /*!< EPI Address Map */
__IO uint32_t RSIZE0; /*!< EPI Read Size 0 */
__IO uint32_t RADDR0; /*!< EPI Read Address 0 */
__IO uint32_t RPSTD0; /*!< EPI Non-Blocking Read Data 0 */
__I uint32_t RESERVED2;
__IO uint32_t RSIZE1; /*!< EPI Read Size 1 */
__IO uint32_t RADDR1; /*!< EPI Read Address 1 */
__IO uint32_t RPSTD1; /*!< EPI Non-Blocking Read Data 1 */
__I uint32_t RESERVED3[9];
__IO uint32_t STAT; /*!< EPI Status */
__I uint32_t RESERVED4[2];
__IO uint32_t RFIFOCNT; /*!< EPI Read FIFO Count */
__IO uint32_t READFIFO0; /*!< EPI Read FIFO */
__IO uint32_t READFIFO1; /*!< EPI Read FIFO Alias 1 */
__IO uint32_t READFIFO2; /*!< EPI Read FIFO Alias 2 */
__IO uint32_t READFIFO3; /*!< EPI Read FIFO Alias 3 */
__IO uint32_t READFIFO4; /*!< EPI Read FIFO Alias 4 */
__IO uint32_t READFIFO5; /*!< EPI Read FIFO Alias 5 */
__IO uint32_t READFIFO6; /*!< EPI Read FIFO Alias 6 */
__IO uint32_t READFIFO7; /*!< EPI Read FIFO Alias 7 */
__I uint32_t RESERVED5[92];
__IO uint32_t FIFOLVL; /*!< EPI FIFO Level Selects */
__IO uint32_t WFIFOCNT; /*!< EPI Write FIFO Count */
__IO uint32_t DMATXCNT; /*!< EPI DMA Transmit Count */
__I uint32_t RESERVED6;
__IO uint32_t IM; /*!< EPI Interrupt Mask */
__IO uint32_t RIS; /*!< EPI Raw Interrupt Status */
__IO uint32_t MIS; /*!< EPI Masked Interrupt Status */
__IO uint32_t EISC; /*!< EPI Error and Interrupt Status and Clear */
__I uint32_t RESERVED7[58];
union
{
__IO uint32_t HB8CFG3; /*!< EPI Host-Bus 8 Configuration 3 */
__IO uint32_t HB16CFG3; /*!< EPI Host-Bus 16 Configuration 3 */
};
union
{
__IO uint32_t HB8CFG4; /*!< EPI Host-Bus 8 Configuration 4 */
__IO uint32_t HB16CFG4; /*!< EPI Host-Bus 16 Configuration 4 */
};
union
{
__IO uint32_t HB8TIME; /*!< EPI Host-Bus 8 Timing Extension */
__IO uint32_t HB16TIME; /*!< EPI Host-Bus 16 Timing Extension */
};
union
{
__IO uint32_t HB8TIME2; /*!< EPI Host-Bus 8 Timing Extension */
__IO uint32_t HB16TIME2; /*!< EPI Host-Bus 16 Timing Extension */
};
union
{
__IO uint32_t HB8TIME3; /*!< EPI Host-Bus 8 Timing Extension */
__IO uint32_t HB16TIME3; /*!< EPI Host-Bus 16 Timing Extension */
};
union
{
__IO uint32_t HB8TIME4; /*!< EPI Host-Bus 8 Timing Extension */
__IO uint32_t HB16TIME4; /*!< EPI Host-Bus 16 Timing Extension */
};
__I uint32_t RESERVED8[16];
__IO uint32_t HBPSRAM; /*!< EPI Host-Bus PSRAM */
} EPI0_Type;
/* ================================================================================ */
/* ================ EMAC0 ================ */
/* ================================================================================ */
/**
* @brief Register map for EMAC0 peripheral (EMAC0)
*/
typedef struct /*!< EMAC0 Structure */
{
__IO uint32_t CFG; /*!< Ethernet MAC Configuration */
__IO uint32_t FRAMEFLTR; /*!< Ethernet MAC Frame Filter */
__IO uint32_t HASHTBLH; /*!< Ethernet MAC Hash Table High */
__IO uint32_t HASHTBLL; /*!< Ethernet MAC Hash Table Low */
__IO uint32_t MIIADDR; /*!< Ethernet MAC MII Address */
__IO uint32_t MIIDATA; /*!< Ethernet MAC MII Data Register */
__IO uint32_t FLOWCTL; /*!< Ethernet MAC Flow Control */
__IO uint32_t VLANTG; /*!< Ethernet MAC VLAN Tag */
__I uint32_t RESERVED0;
__IO uint32_t STATUS; /*!< Ethernet MAC Status */
__IO uint32_t RWUFF; /*!< Ethernet MAC Remote Wake-Up Frame Filter */
__IO uint32_t PMTCTLSTAT; /*!< Ethernet MAC PMT Control and Status Register */
__IO uint32_t LPICTLSTAT; /*!< Ethernet MAC Low Power Idle Control and Status Register */
__IO uint32_t LPITIMERCTL; /*!< Ethernet MAC Low Power Idle Timer Control Register */
__IO uint32_t RIS; /*!< Ethernet MAC Raw Interrupt Status */
__IO uint32_t IM; /*!< Ethernet MAC Interrupt Mask */
__IO uint32_t ADDR0H; /*!< Ethernet MAC Address 0 High */
__IO uint32_t ADDR0L; /*!< Ethernet MAC Address 0 Low Register */
__IO uint32_t ADDR1H; /*!< Ethernet MAC Address 1 High */
__IO uint32_t ADDR1L; /*!< Ethernet MAC Address 1 Low */
__IO uint32_t ADDR2H; /*!< Ethernet MAC Address 2 High */
__IO uint32_t ADDR2L; /*!< Ethernet MAC Address 2 Low */
__IO uint32_t ADDR3H; /*!< Ethernet MAC Address 3 High */
__IO uint32_t ADDR3L; /*!< Ethernet MAC Address 3 Low */
__I uint32_t RESERVED1[31];
__IO uint32_t WDOGTO; /*!< Ethernet MAC Watchdog Timeout */
__I uint32_t RESERVED2[8];
__IO uint32_t MMCCTRL; /*!< Ethernet MAC MMC Control */
__IO uint32_t MMCRXRIS; /*!< Ethernet MAC MMC Receive Raw Interrupt Status */
__IO uint32_t MMCTXRIS; /*!< Ethernet MAC MMC Transmit Raw Interrupt Status */
__IO uint32_t MMCRXIM; /*!< Ethernet MAC MMC Receive Interrupt Mask */
__IO uint32_t MMCTXIM; /*!< Ethernet MAC MMC Transmit Interrupt Mask */
__I uint32_t RESERVED3;
__IO uint32_t TXCNTGB; /*!< Ethernet MAC Transmit Frame Count for Good and Bad Frames */
__I uint32_t RESERVED4[12];
__IO uint32_t TXCNTSCOL; /*!< Ethernet MAC Transmit Frame Count for Frames Transmitted after
Single Collision */
__IO uint32_t TXCNTMCOL; /*!< Ethernet MAC Transmit Frame Count for Frames Transmitted after
Multiple Collisions */
__I uint32_t RESERVED5[4];
__IO uint32_t TXOCTCNTG; /*!< Ethernet MAC Transmit Octet Count Good */
__I uint32_t RESERVED6[6];
__IO uint32_t RXCNTGB; /*!< Ethernet MAC Receive Frame Count for Good and Bad Frames */
__I uint32_t RESERVED7[4];
__IO uint32_t RXCNTCRCERR; /*!< Ethernet MAC Receive Frame Count for CRC Error Frames */
__IO uint32_t RXCNTALGNERR; /*!< Ethernet MAC Receive Frame Count for Alignment Error Frames */
__I uint32_t RESERVED9[10];
__IO uint32_t RXCNTGUNI; /*!< Ethernet MAC Receive Frame Count for Good Unicast Frames */
__I uint32_t RESERVED10[239];
__IO uint32_t VLNINCREP; /*!< Ethernet MAC VLAN Tag Inclusion or Replacement */
__IO uint32_t VLANHASH; /*!< Ethernet MAC VLAN Hash Table */
__I uint32_t RESERVED11[93];
__IO uint32_t TIMSTCTRL; /*!< Ethernet MAC Timestamp Control */
__IO uint32_t SUBSECINC; /*!< Ethernet MAC Sub-Second Increment */
__IO uint32_t TIMSEC; /*!< Ethernet MAC System Time - Seconds */
__IO uint32_t TIMNANO; /*!< Ethernet MAC System Time - Nanoseconds */
__IO uint32_t TIMSECU; /*!< Ethernet MAC System Time - Seconds Update */
__IO uint32_t TIMNANOU; /*!< Ethernet MAC System Time - Nanoseconds Update */
__IO uint32_t TIMADD; /*!< Ethernet MAC Timestamp Addend */
__IO uint32_t TARGSEC; /*!< Ethernet MAC Target Time Seconds */
__IO uint32_t TARGNANO; /*!< Ethernet MAC Target Time Nanoseconds */
__IO uint32_t HWORDSEC; /*!< Ethernet MAC System Time-Higher Word Seconds */
__IO uint32_t TIMSTAT; /*!< Ethernet MAC Timestamp Status */
__IO uint32_t PPSCTRL; /*!< Ethernet MAC PPS Control */
__I uint32_t RESERVED12[12];
__IO uint32_t PPS0INTVL; /*!< Ethernet MAC PPS0 Interval */
__IO uint32_t PPS0WIDTH; /*!< Ethernet MAC PPS0 Width */
__I uint32_t RESERVED13[294];
__IO uint32_t DMABUSMOD; /*!< Ethernet MAC DMA Bus Mode */
__O uint32_t TXPOLLD; /*!< Ethernet MAC Transmit Poll Demand */
__O uint32_t RXPOLLD; /*!< Ethernet MAC Receive Poll Demand */
__IO uint32_t RXDLADDR; /*!< Ethernet MAC Receive Descriptor List Address */
__IO uint32_t TXDLADDR; /*!< Ethernet MAC Transmit Descriptor List Address */
__IO uint32_t DMARIS; /*!< Ethernet MAC DMA Interrupt Status */
__IO uint32_t DMAOPMODE; /*!< Ethernet MAC DMA Operation Mode */
__IO uint32_t DMAIM; /*!< Ethernet MAC DMA Interrupt Mask Register */
__IO uint32_t MFBOC; /*!< Ethernet MAC Missed Frame and Buffer Overflow Counter */
__IO uint32_t RXINTWDT; /*!< Ethernet MAC Receive Interrupt Watchdog Timer */
__I uint32_t RESERVED14[8];
__IO uint32_t HOSTXDESC; /*!< Ethernet MAC Current Host Transmit Descriptor */
__IO uint32_t HOSRXDESC; /*!< Ethernet MAC Current Host Receive Descriptor */
__IO uint32_t HOSTXBA; /*!< Ethernet MAC Current Host Transmit Buffer Address */
__IO uint32_t HOSRXBA; /*!< Ethernet MAC Current Host Receive Buffer Address */
__I uint32_t RESERVED15[218];
__IO uint32_t PP; /*!< Ethernet MAC Peripheral Property Register */
__IO uint32_t PC; /*!< Ethernet MAC Peripheral Configuration Register */
__IO uint32_t CC; /*!< Ethernet MAC Clock Configuration Register */
__IO uint32_t EPHYRIS; /*!< Ethernet PHY Raw Interrupt Status */
__IO uint32_t EPHYIM; /*!< Ethernet PHY Interrupt Mask */
__IO uint32_t EPHYMISC; /*!< Ethernet PHY Masked Interrupt Status and Clear */
} EMAC0_Type;
/* ================================================================================ */
/* ================ SYSEXC ================ */
/* ================================================================================ */
/**
* @brief Register map for SYSEXC peripheral (SYSEXC)
*/
typedef struct /*!< SYSEXC Structure */
{
__IO uint32_t RIS; /*!< System Exception Raw Interrupt Status */
__IO uint32_t IM; /*!< System Exception Interrupt Mask */
__IO uint32_t MIS; /*!< System Exception Masked Interrupt Status */
__O uint32_t IC; /*!< System Exception Interrupt Clear */
} SYSEXC_Type;
/* ================================================================================ */
/* ================ HIB ================ */
/* ================================================================================ */
/**
* @brief Register map for HIB peripheral (HIB)
*/
typedef struct /*!< HIB Structure */
{
__IO uint32_t RTCC; /*!< Hibernation RTC Counter */
__IO uint32_t RTCM0; /*!< Hibernation RTC Match 0 */
__I uint32_t RESERVED0;
__IO uint32_t RTCLD; /*!< Hibernation RTC Load */
__IO uint32_t CTL; /*!< Hibernation Control */
__IO uint32_t IM; /*!< Hibernation Interrupt Mask */
__IO uint32_t RIS; /*!< Hibernation Raw Interrupt Status */
__IO uint32_t MIS; /*!< Hibernation Masked Interrupt Status */
__IO uint32_t IC; /*!< Hibernation Interrupt Clear */
__IO uint32_t RTCT; /*!< Hibernation RTC Trim */
__IO uint32_t RTCSS; /*!< Hibernation RTC Sub Seconds */
__IO uint32_t IO; /*!< Hibernation IO Configuration */
__IO uint32_t DATA; /*!< Hibernation Data */
__I uint32_t RESERVED1[179];
__IO uint32_t CALCTL; /*!< Hibernation Calendar Control */
__I uint32_t RESERVED2[3];
__IO uint32_t CAL0; /*!< Hibernation Calendar 0 */
__IO uint32_t CAL1; /*!< Hibernation Calendar 1 */
__I uint32_t RESERVED3[2];
__O uint32_t CALLD0; /*!< Hibernation Calendar Load 0 */
__O uint32_t CALLD1; /*!< Hibernation Calendar Load */
__I uint32_t RESERVED4[2];
__IO uint32_t CALM0; /*!< Hibernation Calendar Match 0 */
__IO uint32_t CALM1; /*!< Hibernation Calendar Match 1 */
__I uint32_t RESERVED5[10];
__IO uint32_t LOCK; /*!< Hibernation Lock */
__I uint32_t RESERVED6[39];
__IO uint32_t TPCTL; /*!< HIB Tamper Control */
__IO uint32_t TPSTAT; /*!< HIB Tamper Status */
__I uint32_t RESERVED7[2];
__IO uint32_t TPIO; /*!< HIB Tamper I/O Control */
__I uint32_t RESERVED8[51];
__IO uint32_t TPLOG0; /*!< HIB Tamper Log 0 */
__IO uint32_t TPLOG1; /*!< HIB Tamper Log 1 */
__IO uint32_t TPLOG2; /*!< HIB Tamper Log 2 */
__IO uint32_t TPLOG3; /*!< HIB Tamper Log 3 */
__IO uint32_t TPLOG4; /*!< HIB Tamper Log 4 */
__IO uint32_t TPLOG5; /*!< HIB Tamper Log 5 */
__IO uint32_t TPLOG6; /*!< HIB Tamper Log 6 */
__IO uint32_t TPLOG7; /*!< HIB Tamper Log 7 */
__I uint32_t RESERVED9[688];
__IO uint32_t PP; /*!< Hibernation Peripheral Properties */
__I uint32_t RESERVED10;
__IO uint32_t CC; /*!< Hibernation Clock Control */
} HIB_Type;
/* ================================================================================ */
/* ================ FLASH_CTRL ================ */
/* ================================================================================ */
/**
* @brief Register map for FLASH_CTRL peripheral (FLASH_CTRL)
*/
typedef struct /*!< FLASH_CTRL Structure */
{
__IO uint32_t FMA; /*!< Flash Memory Address */
__IO uint32_t FMD; /*!< Flash Memory Data */
__IO uint32_t FMC; /*!< Flash Memory Control */
__IO uint32_t FCRIS; /*!< Flash Controller Raw Interrupt Status */
__IO uint32_t FCIM; /*!< Flash Controller Interrupt Mask */
__IO uint32_t FCMISC; /*!< Flash Controller Masked Interrupt Status and Clear */
__I uint32_t RESERVED0[2];
__IO uint32_t FMC2; /*!< Flash Memory Control 2 */
__I uint32_t RESERVED1[3];
__IO uint32_t FWBVAL; /*!< Flash Write Buffer Valid */
__I uint32_t RESERVED2[2];
__IO uint32_t FLPEKEY; /*!< Flash Program/Erase Key */
__I uint32_t RESERVED3[48];
__IO uint32_t FWBN[32]; /*!< Flash Write Buffer n */
__I uint32_t RESERVED4[912];
union
{
__IO uint32_t PP; /*!< Flash Peripheral Properties */
__IO uint32_t FSIZE; /*!< Flash Size */
};
__IO uint32_t SSIZE; /*!< SRAM Size */
__IO uint32_t CONF; /*!< Flash Configuration Register */
__IO uint32_t ROMSWMAP; /*!< ROM Software Map */
__IO uint32_t DMASZ; /*!< Flash DMA Address Size */
__IO uint32_t DMAST; /*!< Flash DMA Starting Address */
__I uint32_t RESERVED5[63];
__IO uint32_t RVP; /*!< Reset Vector Pointer */
__I uint32_t RESERVED6[62];
__IO uint32_t BOOTCFG; /*!< Boot Configuration */
__I uint32_t RESERVED7[3];
__IO uint32_t USERREG0; /*!< User Register 0 */
__IO uint32_t USERREG1; /*!< User Register 1 */
__IO uint32_t USERREG2; /*!< User Register 2 */
__IO uint32_t USERREG3; /*!< User Register 3 */
__I uint32_t RESERVED8[4];
__IO uint32_t FMPRE0; /*!< Flash Memory Protection Read Enable 0 */
__IO uint32_t FMPRE1; /*!< Flash Memory Protection Read Enable 1 */
__IO uint32_t FMPRE2; /*!< Flash Memory Protection Read Enable 2 */
__IO uint32_t FMPRE3; /*!< Flash Memory Protection Read Enable 3 */
__IO uint32_t FMPRE4; /*!< Flash Memory Protection Read Enable 4 */
__IO uint32_t FMPRE5; /*!< Flash Memory Protection Read Enable 5 */
__IO uint32_t FMPRE6; /*!< Flash Memory Protection Read Enable 6 */
__IO uint32_t FMPRE7; /*!< Flash Memory Protection Read Enable 7 */
__IO uint32_t FMPRE8; /*!< Flash Memory Protection Read Enable 8 */
__IO uint32_t FMPRE9; /*!< Flash Memory Protection Read Enable 9 */
__IO uint32_t FMPRE10; /*!< Flash Memory Protection Read Enable 10 */
__IO uint32_t FMPRE11; /*!< Flash Memory Protection Read Enable 11 */
__IO uint32_t FMPRE12; /*!< Flash Memory Protection Read Enable 12 */
__IO uint32_t FMPRE13; /*!< Flash Memory Protection Read Enable 13 */
__IO uint32_t FMPRE14; /*!< Flash Memory Protection Read Enable 14 */
__IO uint32_t FMPRE15; /*!< Flash Memory Protection Read Enable 15 */
__I uint32_t RESERVED9[112];
__IO uint32_t FMPPE0; /*!< Flash Memory Protection Program Enable 0 */
__IO uint32_t FMPPE1; /*!< Flash Memory Protection Program Enable 1 */
__IO uint32_t FMPPE2; /*!< Flash Memory Protection Program Enable 2 */
__IO uint32_t FMPPE3; /*!< Flash Memory Protection Program Enable 3 */
__IO uint32_t FMPPE4; /*!< Flash Memory Protection Program Enable 4 */
__IO uint32_t FMPPE5; /*!< Flash Memory Protection Program Enable 5 */
__IO uint32_t FMPPE6; /*!< Flash Memory Protection Program Enable 6 */
__IO uint32_t FMPPE7; /*!< Flash Memory Protection Program Enable 7 */
__IO uint32_t FMPPE8; /*!< Flash Memory Protection Program Enable 8 */
__IO uint32_t FMPPE9; /*!< Flash Memory Protection Program Enable 9 */
__IO uint32_t FMPPE10; /*!< Flash Memory Protection Program Enable 10 */
__IO uint32_t FMPPE11; /*!< Flash Memory Protection Program Enable 11 */
__IO uint32_t FMPPE12; /*!< Flash Memory Protection Program Enable 12 */
__IO uint32_t FMPPE13; /*!< Flash Memory Protection Program Enable 13 */
__IO uint32_t FMPPE14; /*!< Flash Memory Protection Program Enable 14 */
__IO uint32_t FMPPE15; /*!< Flash Memory Protection Program Enable 15 */
} FLASH_CTRL_Type;
/* ================================================================================ */
/* ================ SYSCTL ================ */
/* ================================================================================ */
/**
* @brief Register map for SYSCTL peripheral (SYSCTL)
*/
typedef struct /*!< SYSCTL Structure */
{
__IO uint32_t DID0; /*!< Device Identification 0 */
__IO uint32_t DID1; /*!< Device Identification 1 */
__I uint32_t RESERVED0[12];
__IO uint32_t PTBOCTL; /*!< Power-Temp Brown Out Control */
__I uint32_t RESERVED1[5];
__IO uint32_t RIS; /*!< Raw Interrupt Status */
__IO uint32_t IMC; /*!< Interrupt Mask Control */
__IO uint32_t MISC; /*!< Masked Interrupt Status and Clear */
__IO uint32_t RESC; /*!< Reset Cause */
__IO uint32_t PWRTC; /*!< Power-Temperature Cause */
__IO uint32_t NMIC; /*!< NMI Cause Register */
__I uint32_t RESERVED2[5];
__IO uint32_t MOSCCTL; /*!< Main Oscillator Control */
__I uint32_t RESERVED3[12];
__IO uint32_t RSCLKCFG; /*!< Run and Sleep Mode Configuration Register */
__I uint32_t RESERVED4[3];
__IO uint32_t MEMTIM0; /*!< Memory Timing Parameter Register 0 for Main Flash and EEPROM */
__I uint32_t RESERVED5[29];
__IO uint32_t ALTCLKCFG; /*!< Alternate Clock Configuration */
__I uint32_t RESERVED6[2];
__IO uint32_t DSCLKCFG; /*!< Deep Sleep Clock Configuration Register */
__IO uint32_t DIVSCLK; /*!< Divisor and Source Clock Configuration */
__IO uint32_t SYSPROP; /*!< System Properties */
__IO uint32_t PIOSCCAL; /*!< Precision Internal Oscillator Calibration */
__IO uint32_t PIOSCSTAT; /*!< Precision Internal Oscillator Statistics */
__I uint32_t RESERVED7[2];
__IO uint32_t PLLFREQ0; /*!< PLL Frequency 0 */
__IO uint32_t PLLFREQ1; /*!< PLL Frequency 1 */
__IO uint32_t PLLSTAT; /*!< PLL Status */
__I uint32_t RESERVED8[7];
__IO uint32_t SLPPWRCFG; /*!< Sleep Power Configuration */
__IO uint32_t DSLPPWRCFG; /*!< Deep-Sleep Power Configuration */
__I uint32_t RESERVED9[4];
__IO uint32_t NVMSTAT; /*!< Non-Volatile Memory Information */
__I uint32_t RESERVED10[4];
__IO uint32_t LDOSPCTL; /*!< LDO Sleep Power Control */
__I uint32_t RESERVED11;
__IO uint32_t LDODPCTL; /*!< LDO Deep-Sleep Power Control */
__I uint32_t RESERVED12[6];
__IO uint32_t RESBEHAVCTL; /*!< Reset Behavior Control Register */
__I uint32_t RESERVED13[6];
__IO uint32_t HSSR; /*!< Hardware System Service Request */
__I uint32_t RESERVED14[34];
__IO uint32_t USBPDS; /*!< USB Power Domain Status */
__IO uint32_t USBMPC; /*!< USB Memory Power Control */
__IO uint32_t EMACPDS; /*!< Ethernet MAC Power Domain Status */
__IO uint32_t EMACMPC; /*!< Ethernet MAC Memory Power Control */
__I uint32_t RESERVED15;
__IO uint32_t LCDMPC; /*!< LCD Memory Power Control */
__I uint32_t RESERVED16[26];
__IO uint32_t PPWD; /*!< Watchdog Timer Peripheral Present */
__IO uint32_t PPTIMER; /*!< 16/32-Bit General-Purpose Timer Peripheral Present */
__IO uint32_t PPGPIO; /*!< General-Purpose Input/Output Peripheral Present */
__IO uint32_t PPDMA; /*!< Micro Direct Memory Access Peripheral Present */
__IO uint32_t PPEPI; /*!< EPI Peripheral Present */
__IO uint32_t PPHIB; /*!< Hibernation Peripheral Present */
__IO uint32_t PPUART; /*!< Universal Asynchronous Receiver/Transmitter Peripheral Present */
__IO uint32_t PPSSI; /*!< Synchronous Serial Interface Peripheral Present */
__IO uint32_t PPI2C; /*!< Inter-Integrated Circuit Peripheral Present */
__I uint32_t RESERVED17;
__IO uint32_t PPUSB; /*!< Universal Serial Bus Peripheral Present */
__I uint32_t RESERVED18;
__IO uint32_t PPEPHY; /*!< Ethernet PHY Peripheral Present */
__IO uint32_t PPCAN; /*!< Controller Area Network Peripheral Present */
__IO uint32_t PPADC; /*!< Analog-to-Digital Converter Peripheral Present */
__IO uint32_t PPACMP; /*!< Analog Comparator Peripheral Present */
__IO uint32_t PPPWM; /*!< Pulse Width Modulator Peripheral Present */
__IO uint32_t PPQEI; /*!< Quadrature Encoder Interface Peripheral Present */
__I uint32_t RESERVED19[4];
__IO uint32_t PPEEPROM; /*!< EEPROM Peripheral Present */
__I uint32_t RESERVED20[6];
__IO uint32_t PPCCM; /*!< CRC and Cryptographic Modules Peripheral Present */
__I uint32_t RESERVED21[6];
__IO uint32_t PPLCD; /*!< LCD Peripheral Present */
__I uint32_t RESERVED22;
__IO uint32_t PPOWIRE; /*!< 1-Wire Peripheral Present */
__IO uint32_t PPEMAC; /*!< Ethernet MAC Peripheral Present */
__I uint32_t RESERVED23[88];
__IO uint32_t SRWD; /*!< Watchdog Timer Software Reset */
__IO uint32_t SRTIMER; /*!< 16/32-Bit General-Purpose Timer Software Reset */
__IO uint32_t SRGPIO; /*!< General-Purpose Input/Output Software Reset */
__IO uint32_t SRDMA; /*!< Micro Direct Memory Access Software Reset */
__IO uint32_t SREPI; /*!< EPI Software Reset */
__IO uint32_t SRHIB; /*!< Hibernation Software Reset */
__IO uint32_t SRUART; /*!< Universal Asynchronous Receiver/Transmitter Software Reset */
__IO uint32_t SRSSI; /*!< Synchronous Serial Interface Software Reset */
__IO uint32_t SRI2C; /*!< Inter-Integrated Circuit Software Reset */
__I uint32_t RESERVED24;
__IO uint32_t SRUSB; /*!< Universal Serial Bus Software Reset */
__I uint32_t RESERVED25;
__IO uint32_t SREPHY; /*!< Ethernet PHY Software Reset */
__IO uint32_t SRCAN; /*!< Controller Area Network Software Reset */
__IO uint32_t SRADC; /*!< Analog-to-Digital Converter Software Reset */
__IO uint32_t SRACMP; /*!< Analog Comparator Software Reset */
__IO uint32_t SRPWM; /*!< Pulse Width Modulator Software Reset */
__IO uint32_t SRQEI; /*!< Quadrature Encoder Interface Software Reset */
__I uint32_t RESERVED26[4];
__IO uint32_t SREEPROM; /*!< EEPROM Software Reset */
__I uint32_t RESERVED27[6];
__IO uint32_t SRCCM; /*!< CRC and Cryptographic Modules Software Reset */
__I uint32_t RESERVED28[6];
__IO uint32_t SRLCD; /*!< LCD Controller Software Reset */
__I uint32_t RESERVED29;
__IO uint32_t SROWIRE; /*!< 1-Wire Software Reset */
__IO uint32_t SREMAC; /*!< Ethernet MAC Software Reset */
__I uint32_t RESERVED30[24];
__IO uint32_t RCGCWD; /*!< Watchdog Timer Run Mode Clock Gating Control */
__IO uint32_t RCGCTIMER; /*!< 16/32-Bit General-Purpose Timer Run Mode Clock Gating Control */
__IO uint32_t RCGCGPIO; /*!< General-Purpose Input/Output Run Mode Clock Gating Control */
__IO uint32_t RCGCDMA; /*!< Micro Direct Memory Access Run Mode Clock Gating Control */
__IO uint32_t RCGCEPI; /*!< EPI Run Mode Clock Gating Control */
__IO uint32_t RCGCHIB; /*!< Hibernation Run Mode Clock Gating Control */
__IO uint32_t RCGCUART; /*!< Universal Asynchronous Receiver/Transmitter Run Mode Clock Gating
Control */
__IO uint32_t RCGCSSI; /*!< Synchronous Serial Interface Run Mode Clock Gating Control */
__IO uint32_t RCGCI2C; /*!< Inter-Integrated Circuit Run Mode Clock Gating Control */
__I uint32_t RESERVED31;
__IO uint32_t RCGCUSB; /*!< Universal Serial Bus Run Mode Clock Gating Control */
__I uint32_t RESERVED32;
__IO uint32_t RCGCEPHY; /*!< Ethernet PHY Run Mode Clock Gating Control */
__IO uint32_t RCGCCAN; /*!< Controller Area Network Run Mode Clock Gating Control */
__IO uint32_t RCGCADC; /*!< Analog-to-Digital Converter Run Mode Clock Gating Control */
__IO uint32_t RCGCACMP; /*!< Analog Comparator Run Mode Clock Gating Control */
__IO uint32_t RCGCPWM; /*!< Pulse Width Modulator Run Mode Clock Gating Control */
__IO uint32_t RCGCQEI; /*!< Quadrature Encoder Interface Run Mode Clock Gating Control */
__I uint32_t RESERVED33[4];
__IO uint32_t RCGCEEPROM; /*!< EEPROM Run Mode Clock Gating Control */
__I uint32_t RESERVED34[6];
__IO uint32_t RCGCCCM; /*!< CRC and Cryptographic Modules Run Mode Clock Gating Control */
__I uint32_t RESERVED35[6];
__IO uint32_t RCGCLCD; /*!< LCD Controller Run Mode Clock Gating Control */
__I uint32_t RESERVED36;
__IO uint32_t RCGCOWIRE; /*!< 1-Wire Run Mode Clock Gating Control */
__IO uint32_t RCGCEMAC; /*!< Ethernet MAC Run Mode Clock Gating Control */
__I uint32_t RESERVED37[24];
__IO uint32_t SCGCWD; /*!< Watchdog Timer Sleep Mode Clock Gating Control */
__IO uint32_t SCGCTIMER; /*!< 16/32-Bit General-Purpose Timer Sleep Mode Clock Gating Control */
__IO uint32_t SCGCGPIO; /*!< General-Purpose Input/Output Sleep Mode Clock Gating Control */
__IO uint32_t SCGCDMA; /*!< Micro Direct Memory Access Sleep Mode Clock Gating Control */
__IO uint32_t SCGCEPI; /*!< EPI Sleep Mode Clock Gating Control */
__IO uint32_t SCGCHIB; /*!< Hibernation Sleep Mode Clock Gating Control */
__IO uint32_t SCGCUART; /*!< Universal Asynchronous Receiver/Transmitter Sleep Mode Clock
Gating Control */
__IO uint32_t SCGCSSI; /*!< Synchronous Serial Interface Sleep Mode Clock Gating Control */
__IO uint32_t SCGCI2C; /*!< Inter-Integrated Circuit Sleep Mode Clock Gating Control */
__I uint32_t RESERVED38;
__IO uint32_t SCGCUSB; /*!< Universal Serial Bus Sleep Mode Clock Gating Control */
__I uint32_t RESERVED39;
__IO uint32_t SCGCEPHY; /*!< Ethernet PHY Sleep Mode Clock Gating Control */
__IO uint32_t SCGCCAN; /*!< Controller Area Network Sleep Mode Clock Gating Control */
__IO uint32_t SCGCADC; /*!< Analog-to-Digital Converter Sleep Mode Clock Gating Control */
__IO uint32_t SCGCACMP; /*!< Analog Comparator Sleep Mode Clock Gating Control */
__IO uint32_t SCGCPWM; /*!< Pulse Width Modulator Sleep Mode Clock Gating Control */
__IO uint32_t SCGCQEI; /*!< Quadrature Encoder Interface Sleep Mode Clock Gating Control */
__I uint32_t RESERVED40[4];
__IO uint32_t SCGCEEPROM; /*!< EEPROM Sleep Mode Clock Gating Control */
__I uint32_t RESERVED41[6];
__IO uint32_t SCGCCCM; /*!< CRC and Cryptographic Modules Sleep Mode Clock Gating Control */
__I uint32_t RESERVED42[6];
__IO uint32_t SCGCLCD; /*!< LCD Controller Sleep Mode Clock Gating Control */
__I uint32_t RESERVED43;
__IO uint32_t SCGCOWIRE; /*!< 1-Wire Sleep Mode Clock Gating Control */
__IO uint32_t SCGCEMAC; /*!< Ethernet MAC Sleep Mode Clock Gating Control */
__I uint32_t RESERVED44[24];
__IO uint32_t DCGCWD; /*!< Watchdog Timer Deep-Sleep Mode Clock Gating Control */
__IO uint32_t DCGCTIMER; /*!< 16/32-Bit General-Purpose Timer Deep-Sleep Mode Clock Gating
Control */
__IO uint32_t DCGCGPIO; /*!< General-Purpose Input/Output Deep-Sleep Mode Clock Gating Control */
__IO uint32_t DCGCDMA; /*!< Micro Direct Memory Access Deep-Sleep Mode Clock Gating Control */
__IO uint32_t DCGCEPI; /*!< EPI Deep-Sleep Mode Clock Gating Control */
__IO uint32_t DCGCHIB; /*!< Hibernation Deep-Sleep Mode Clock Gating Control */
__IO uint32_t DCGCUART; /*!< Universal Asynchronous Receiver/Transmitter Deep-Sleep Mode
Clock Gating Control */
__IO uint32_t DCGCSSI; /*!< Synchronous Serial Interface Deep-Sleep Mode Clock Gating Control */
__IO uint32_t DCGCI2C; /*!< Inter-Integrated Circuit Deep-Sleep Mode Clock Gating Control */
__I uint32_t RESERVED45;
__IO uint32_t DCGCUSB; /*!< Universal Serial Bus Deep-Sleep Mode Clock Gating Control */
__I uint32_t RESERVED46;
__IO uint32_t DCGCEPHY; /*!< Ethernet PHY Deep-Sleep Mode Clock Gating Control */
__IO uint32_t DCGCCAN; /*!< Controller Area Network Deep-Sleep Mode Clock Gating Control */
__IO uint32_t DCGCADC; /*!< Analog-to-Digital Converter Deep-Sleep Mode Clock Gating Control */
__IO uint32_t DCGCACMP; /*!< Analog Comparator Deep-Sleep Mode Clock Gating Control */
__IO uint32_t DCGCPWM; /*!< Pulse Width Modulator Deep-Sleep Mode Clock Gating Control */
__IO uint32_t DCGCQEI; /*!< Quadrature Encoder Interface Deep-Sleep Mode Clock Gating Control */
__I uint32_t RESERVED47[4];
__IO uint32_t DCGCEEPROM; /*!< EEPROM Deep-Sleep Mode Clock Gating Control */
__I uint32_t RESERVED48[6];
__IO uint32_t DCGCCCM; /*!< CRC and Cryptographic Modules Deep-Sleep Mode Clock Gating Control */
__I uint32_t RESERVED49[6];
__IO uint32_t DCGCLCD; /*!< LCD Controller Deep-Sleep Mode Clock Gating Control */
__I uint32_t RESERVED50;
__IO uint32_t DCGCOWIRE; /*!< 1-Wire Deep-Sleep Mode Clock Gating Control */
__IO uint32_t DCGCEMAC; /*!< Ethernet MAC Deep-Sleep Mode Clock Gating Control */
__I uint32_t RESERVED51[24];
__IO uint32_t PCWD; /*!< Watchdog Timer Power Control */
__IO uint32_t PCTIMER; /*!< 16/32-Bit General-Purpose Timer Power Control */
__IO uint32_t PCGPIO; /*!< General-Purpose Input/Output Power Control */
__IO uint32_t PCDMA; /*!< Micro Direct Memory Access Power Control */
__IO uint32_t PCEPI; /*!< External Peripheral Interface Power Control */
__IO uint32_t PCHIB; /*!< Hibernation Power Control */
__IO uint32_t PCUART; /*!< Universal Asynchronous Receiver/Transmitter Power Control */
__IO uint32_t PCSSI; /*!< Synchronous Serial Interface Power Control */
__IO uint32_t PCI2C; /*!< Inter-Integrated Circuit Power Control */
__I uint32_t RESERVED52;
__IO uint32_t PCUSB; /*!< Universal Serial Bus Power Control */
__I uint32_t RESERVED53;
__IO uint32_t PCEPHY; /*!< Ethernet PHY Power Control */
__IO uint32_t PCCAN; /*!< Controller Area Network Power Control */
__IO uint32_t PCADC; /*!< Analog-to-Digital Converter Power Control */
__IO uint32_t PCACMP; /*!< Analog Comparator Power Control */
__IO uint32_t PCPWM; /*!< Pulse Width Modulator Power Control */
__IO uint32_t PCQEI; /*!< Quadrature Encoder Interface Power Control */
__I uint32_t RESERVED54[4];
__IO uint32_t PCEEPROM; /*!< EEPROM Power Control */
__I uint32_t RESERVED55[6];
__IO uint32_t PCCCM; /*!< CRC and Cryptographic Modules Power Control */
__I uint32_t RESERVED56[6];
__IO uint32_t PCLCD; /*!< LCD Controller Power Control */
__I uint32_t RESERVED57;
__IO uint32_t PCOWIRE; /*!< 1-Wire Power Control */
__IO uint32_t PCEMAC; /*!< Ethernet MAC Power Control */
__I uint32_t RESERVED58[24];
__IO uint32_t PRWD; /*!< Watchdog Timer Peripheral Ready */
__IO uint32_t PRTIMER; /*!< 16/32-Bit General-Purpose Timer Peripheral Ready */
__IO uint32_t PRGPIO; /*!< General-Purpose Input/Output Peripheral Ready */
__IO uint32_t PRDMA; /*!< Micro Direct Memory Access Peripheral Ready */
__IO uint32_t PREPI; /*!< EPI Peripheral Ready */
__IO uint32_t PRHIB; /*!< Hibernation Peripheral Ready */
__IO uint32_t PRUART; /*!< Universal Asynchronous Receiver/Transmitter Peripheral Ready */
__IO uint32_t PRSSI; /*!< Synchronous Serial Interface Peripheral Ready */
__IO uint32_t PRI2C; /*!< Inter-Integrated Circuit Peripheral Ready */
__I uint32_t RESERVED59;
__IO uint32_t PRUSB; /*!< Universal Serial Bus Peripheral Ready */
__I uint32_t RESERVED60;
__IO uint32_t PREPHY; /*!< Ethernet PHY Peripheral Ready */
__IO uint32_t PRCAN; /*!< Controller Area Network Peripheral Ready */
__IO uint32_t PRADC; /*!< Analog-to-Digital Converter Peripheral Ready */
__IO uint32_t PRACMP; /*!< Analog Comparator Peripheral Ready */
__IO uint32_t PRPWM; /*!< Pulse Width Modulator Peripheral Ready */
__IO uint32_t PRQEI; /*!< Quadrature Encoder Interface Peripheral Ready */
__I uint32_t RESERVED61[4];
__IO uint32_t PREEPROM; /*!< EEPROM Peripheral Ready */
__I uint32_t RESERVED62[6];
__IO uint32_t PRCCM; /*!< CRC and Cryptographic Modules Peripheral Ready */
__I uint32_t RESERVED63[6];
__IO uint32_t PRLCD; /*!< LCD Controller Peripheral Ready */
__I uint32_t RESERVED64;
__IO uint32_t PROWIRE; /*!< 1-Wire Peripheral Ready */
__IO uint32_t PREMAC; /*!< Ethernet MAC Peripheral Ready */
__I uint32_t RESERVED65[288];
__IO uint32_t UNIQUEID0; /*!< Unique ID 0 */
__IO uint32_t UNIQUEID1; /*!< Unique ID 1 */
__IO uint32_t UNIQUEID2; /*!< Unique ID 2 */
__IO uint32_t UNIQUEID3; /*!< Unique ID 3 */
} SYSCTL_Type;
/* ================================================================================ */
/* ================ UDMA ================ */
/* ================================================================================ */
/**
* @brief Register map for UDMA peripheral (UDMA)
*/
typedef struct /*!< UDMA Structure */
{
__IO uint32_t STAT; /*!< DMA Status */
__O uint32_t CFG; /*!< DMA Configuration */
__IO uint32_t CTLBASE; /*!< DMA Channel Control Base Pointer */
__IO uint32_t ALTBASE; /*!< DMA Alternate Channel Control Base Pointer */
__IO uint32_t WAITSTAT; /*!< DMA Channel Wait-on-Request Status */
__O uint32_t SWREQ; /*!< DMA Channel Software Request */
__IO uint32_t USEBURSTSET; /*!< DMA Channel Useburst Set */
__O uint32_t USEBURSTCLR; /*!< DMA Channel Useburst Clear */
__IO uint32_t REQMASKSET; /*!< DMA Channel Request Mask Set */
__O uint32_t REQMASKCLR; /*!< DMA Channel Request Mask Clear */
__IO uint32_t ENASET; /*!< DMA Channel Enable Set */
__O uint32_t ENACLR; /*!< DMA Channel Enable Clear */
__IO uint32_t ALTSET; /*!< DMA Channel Primary Alternate Set */
__O uint32_t ALTCLR; /*!< DMA Channel Primary Alternate Clear */
__IO uint32_t PRIOSET; /*!< DMA Channel Priority Set */
__O uint32_t PRIOCLR; /*!< DMA Channel Priority Clear */
__I uint32_t RESERVED0[3];
__IO uint32_t ERRCLR; /*!< DMA Bus Error Clear */
__I uint32_t RESERVED1[304];
__IO uint32_t CHMAP0; /*!< DMA Channel Map Select 0 */
__IO uint32_t CHMAP1; /*!< DMA Channel Map Select 1 */
__IO uint32_t CHMAP2; /*!< DMA Channel Map Select 2 */
__IO uint32_t CHMAP3; /*!< DMA Channel Map Select 3 */
} UDMA_Type;
/* ================================================================================ */
/* ================ CCM0 ================ */
/* ================================================================================ */
/**
* @brief Register map for CCM0 peripheral (CCM0)
*/
typedef struct /*!< CCM0 Structure */
{
__I uint32_t RESERVED0[129];
__IO uint32_t CGREQ; /*!< Cryptographic Modules Clock Gating Request */
} CCM0_Type;
/* ================================================================================ */
/* ================ CRC ================ */
/* ================================================================================ */
/**
* @brief Register map for CRC peripheral (CRC)
*/
typedef struct /*!< CRC Structure */
{
__IO uint32_t CTRL; /*!< CRC Control */
__I uint32_t RESERVED2[3];
__IO uint32_t SEED; /*!< CRC SEED/Context */
__IO uint32_t DIN; /*!< CRC Data Input */
__IO uint32_t RSLTPP; /*!< CRC Post Processing Result */
} CRC_Type;
/* ================================================================================ */
/* ================ SHAMD5 ================ */
/* ================================================================================ */
/**
* @brief Register map for SHAMD5 peripheral (SHAMD5)
*/
typedef struct /*!< SHAMD5 Structure */
{
__IO uint32_t ODIGEST_A; /*!< SHA Outer Digest A */
__IO uint32_t ODIGEST_B; /*!< SHA Outer Digest B */
__IO uint32_t ODIGEST_C; /*!< SHA Outer Digest C */
__IO uint32_t ODIGEST_D; /*!< SHA Outer Digest D */
__IO uint32_t ODIGEST_E; /*!< SHA Outer Digest E */
__IO uint32_t ODIGEST_F; /*!< SHA Outer Digest F */
__IO uint32_t ODIGEST_G; /*!< SHA Outer Digest G */
__IO uint32_t ODIGEST_H; /*!< SHA Outer Digest H */
__IO uint32_t IDIGEST_A; /*!< SHA Inner Digest A */
__IO uint32_t IDIGEST_B; /*!< SHA Inner Digest B */
__IO uint32_t IDIGEST_C; /*!< SHA Inner Digest C */
__IO uint32_t IDIGEST_D; /*!< SHA Inner Digest D */
__IO uint32_t IDIGEST_E; /*!< SHA Inner Digest E */
__IO uint32_t IDIGEST_F; /*!< SHA Inner Digest F */
__IO uint32_t IDIGEST_G; /*!< SHA Inner Digest G */
__IO uint32_t IDIGEST_H; /*!< SHA Inner Digest H */
__IO uint32_t DIGEST_COUNT; /*!< SHA Digest Count */
__IO uint32_t MODE; /*!< SHA Mode */
__IO uint32_t LENGTH; /*!< SHA Length */
__I uint32_t RESERVED0[13];
__IO uint32_t DATA_0_IN; /*!< SHA Data 0 Input */
__IO uint32_t DATA_1_IN; /*!< SHA Data 1 Input */
__IO uint32_t DATA_2_IN; /*!< SHA Data 2 Input */
__IO uint32_t DATA_3_IN; /*!< SHA Data 3 Input */
__IO uint32_t DATA_4_IN; /*!< SHA Data 4 Input */
__IO uint32_t DATA_5_IN; /*!< SHA Data 5 Input */
__IO uint32_t DATA_6_IN; /*!< SHA Data 6 Input */
__IO uint32_t DATA_7_IN; /*!< SHA Data 7 Input */
__IO uint32_t DATA_8_IN; /*!< SHA Data 8 Input */
__IO uint32_t DATA_9_IN; /*!< SHA Data 9 Input */
__IO uint32_t DATA_10_IN; /*!< SHA Data 10 Input */
__IO uint32_t DATA_11_IN; /*!< SHA Data 11 Input */
__IO uint32_t DATA_12_IN; /*!< SHA Data 12 Input */
__IO uint32_t DATA_13_IN; /*!< SHA Data 13 Input */
__IO uint32_t DATA_14_IN; /*!< SHA Data 14 Input */
__IO uint32_t DATA_15_IN; /*!< SHA Data 15 Input */
__I uint32_t RESERVED1[16];
__IO uint32_t REVISION; /*!< SHA Revision */
__I uint32_t RESERVED2[3];
__IO uint32_t SYSCONFIG; /*!< SHA System Configuration */
__IO uint32_t SYSSTATUS; /*!< SHA System Status */
__IO uint32_t IRQSTATUS; /*!< SHA Interrupt Status */
__IO uint32_t IRQENABLE; /*!< SHA Interrupt Enable */
} SHAMD5_Type;
typedef struct
{
__IO uint32_t DMAIM; /*!< SHA DMA Interrupt Mask */
__IO uint32_t DMARIS; /*!< SHA DMA Raw Interrupt Status */
__IO uint32_t DMAMIS; /*!< SHA DMA Masked Interrupt Status */
__IO uint32_t DMAIC; /*!< SHA DMA Interrupt Clear */
} SHAMD5_DMA_Type;
/* ================================================================================ */
/* ================ AES ================ */
/* ================================================================================ */
/**
* @brief Register map for AES peripheral (AES)
*/
typedef struct /*!< AES Structure */
{
__IO uint32_t KEY2_6; /*!< AES Key 2_6 */
__IO uint32_t KEY2_7; /*!< AES Key 2_7 */
__IO uint32_t KEY2_4; /*!< AES Key 2_4 */
__IO uint32_t KEY2_5; /*!< AES Key 2_5 */
__IO uint32_t KEY2_2; /*!< AES Key 2_2 */
__IO uint32_t KEY2_3; /*!< AES Key 2_3 */
__IO uint32_t KEY2_0; /*!< AES Key 2_0 */
__IO uint32_t KEY2_1; /*!< AES Key 2_1 */
__IO uint32_t KEY1_6; /*!< AES Key 1_6 */
__IO uint32_t KEY1_7; /*!< AES Key 1_7 */
__IO uint32_t KEY1_4; /*!< AES Key 1_4 */
__IO uint32_t KEY1_5; /*!< AES Key 1_5 */
__IO uint32_t KEY1_2; /*!< AES Key 1_2 */
__IO uint32_t KEY1_3; /*!< AES Key 1_3 */
__IO uint32_t KEY1_0; /*!< AES Key 1_0 */
__IO uint32_t KEY1_1; /*!< AES Key 1_1 */
__IO uint32_t IV_IN_0; /*!< AES Initialization Vector Input 0 */
__IO uint32_t IV_IN_1; /*!< AES Initialization Vector Input 1 */
__IO uint32_t IV_IN_2; /*!< AES Initialization Vector Input 2 */
__IO uint32_t IV_IN_3; /*!< AES Initialization Vector Input 3 */
__IO uint32_t CTRL; /*!< AES Control */
__IO uint32_t C_LENGTH_0; /*!< AES Crypto Data Length 0 */
__IO uint32_t C_LENGTH_1; /*!< AES Crypto Data Length 1 */
__IO uint32_t AUTH_LENGTH; /*!< AES Authentication Data Length */
__IO uint32_t DATA_IN_0; /*!< AES Data RW Plaintext/Ciphertext 0 */
__IO uint32_t DATA_IN_1; /*!< AES Data RW Plaintext/Ciphertext 1 */
__IO uint32_t DATA_IN_2; /*!< AES Data RW Plaintext/Ciphertext 2 */
__IO uint32_t DATA_IN_3; /*!< AES Data RW Plaintext/Ciphertext 3 */
__IO uint32_t TAG_OUT_0; /*!< AES Hash Tag Out 0 */
__IO uint32_t TAG_OUT_1; /*!< AES Hash Tag Out 1 */
__IO uint32_t TAG_OUT_2; /*!< AES Hash Tag Out 2 */
__IO uint32_t TAG_OUT_3; /*!< AES Hash Tag Out 3 */
__IO uint32_t REVISION; /*!< AES IP Revision Identifier */
__IO uint32_t SYSCONFIG; /*!< AES System Configuration */
__IO uint32_t SYSSTATUS; /*!< AES System Status */
__IO uint32_t IRQSTATUS; /*!< AES Interrupt Status */
__IO uint32_t IRQENABLE; /*!< AES Interrupt Enable */
__IO uint32_t DIRTYBITS; /*!< AES Dirty Bits */
} AES_Type;
typedef struct
{
__IO uint32_t DMAIM; /*!< AES DMA Interrupt Mask */
__IO uint32_t DMARIS; /*!< AES DMA Raw Interrupt Status */
__IO uint32_t DMAMIS; /*!< AES DMA Masked Interrupt Status */
__IO uint32_t DMAIC; /*!< AES DMA Interrupt Clear */
} AES_DMA_Type;
/* ================================================================================ */
/* ================ DES ================ */
/* ================================================================================ */
/**
* @brief Register map for DES peripheral (DES)
*/
typedef struct /*!< DES Structure */
{
__IO uint32_t KEY3_L; /*!< DES Key 3 LSW for 192-Bit Key */
__IO uint32_t KEY3_H; /*!< DES Key 3 MSW for 192-Bit Key */
__IO uint32_t KEY2_L; /*!< DES Key 2 LSW for 128-Bit Key */
__IO uint32_t KEY2_H; /*!< DES Key 2 MSW for 128-Bit Key */
__IO uint32_t KEY1_L; /*!< DES Key 1 LSW for 64-Bit Key */
__IO uint32_t KEY1_H; /*!< DES Key 1 MSW for 64-Bit Key */
__IO uint32_t IV_L; /*!< DES Initialization Vector */
__IO uint32_t IV_H; /*!< DES Initialization Vector */
__IO uint32_t CTRL; /*!< DES Control */
__IO uint32_t LENGTH; /*!< DES Cryptographic Data Length */
__IO uint32_t DATA_L; /*!< DES LSW Data RW */
__IO uint32_t DATA_H; /*!< DES MSW Data RW */
__IO uint32_t REVISION; /*!< DES Revision Number */
__IO uint32_t SYSCONFIG; /*!< DES System Configuration */
__IO uint32_t SYSSTATUS; /*!< DES System Status */
__IO uint32_t IRQSTATUS; /*!< DES Interrupt Status */
__IO uint32_t IRQENABLE; /*!< DES Interrupt Enable */
__IO uint32_t DIRTYBITS; /*!< DES Dirty Bits */
} DES_Type;
typedef struct
{
__IO uint32_t DMAIM; /*!< DES DMA Interrupt Mask */
__IO uint32_t DMARIS; /*!< DES DMA Raw Interrupt Status */
__IO uint32_t DMAMIS; /*!< DES DMA Masked Interrupt Status */
__IO uint32_t DMAIC; /*!< DES DMA Interrupt Clear */
} DES_DMA_Type;
/* ================================================================================ */
/* ================ LCD0 ================ */
/* ================================================================================ */
/**
* @brief Register map for LCD0 peripheral (LCD0)
*/
typedef struct /*!< LCD0 Structure */
{
__IO uint32_t PID; /*!< LCD PID Register Format */
__IO uint32_t CTL; /*!< LCD Control */
__I uint32_t RESERVED0;
__IO uint32_t LIDDCTL; /*!< LCD LIDD Control */
__IO uint32_t LIDDCS0CFG; /*!< LCD LIDD CS0 Configuration */
__IO uint32_t LIDDCS0ADDR; /*!< LIDD CS0 Read/Write Address */
__IO uint32_t LIDDCS0DATA; /*!< LIDD CS0 Data Read/Write Initiation */
__IO uint32_t LIDDCS1CFG; /*!< LIDD CS1 Configuration */
__IO uint32_t LIDDCS1ADDR; /*!< LIDD CS1 Address Read/Write Initiation */
__IO uint32_t LIDDCS1DATA; /*!< LIDD CS1 Data Read/Write Initiation */
__IO uint32_t RASTRCTL; /*!< LCD Raster Control */
__IO uint32_t RASTRTIM0; /*!< LCD Raster Timing 0 */
__IO uint32_t RASTRTIM1; /*!< LCD Raster Timing 1 */
__IO uint32_t RASTRTIM2; /*!< LCD Raster Timing 2 */
__IO uint32_t RASTRSUBP1; /*!< LCD Raster Subpanel Display 1 */
__IO uint32_t RASTRSUBP2; /*!< LCD Raster Subpanel Display 2 */
__IO uint32_t DMACTL; /*!< LCD DMA Control */
__IO uint32_t DMABAFB0; /*!< LCD DMA Frame Buffer 0 Base Address */
__IO uint32_t DMACAFB0; /*!< LCD DMA Frame Buffer 0 Ceiling Address */
__IO uint32_t DMABAFB1; /*!< LCD DMA Frame Buffer 1 Base Address */
__IO uint32_t DMACAFB1; /*!< LCD DMA Frame Buffer 1 Ceiling Address */
__IO uint32_t SYSCFG; /*!< LCD System Configuration Register */
__IO uint32_t RISSET; /*!< LCD Interrupt Raw Status and Set Register */
__IO uint32_t MISCLR; /*!< LCD Interrupt Status and Clear */
__IO uint32_t IM; /*!< LCD Interrupt Mask */
__IO uint32_t IENC; /*!< LCD Interrupt Enable Clear */
__I uint32_t RESERVED1;
__IO uint32_t CLKEN; /*!< LCD Clock Enable */
__IO uint32_t CLKRESET; /*!< LCD Clock Resets */
} LCD0_Type;
/* -------------------- End of section using anonymous unions ------------------- */
#if defined(__CC_ARM)
#pragma pop
#elif defined(__ICCARM__)
/* leave anonymous unions enabled */
#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
#pragma clang diagnostic pop
#elif defined(__GNUC__)
/* anonymous unions are enabled by default */
#elif defined(__TMS470__)
/* anonymous unions are enabled by default */
#elif defined(__TASKING__)
#pragma warning restore
#else
#warning Not supported compiler type
#endif
/* ================================================================================ */
/* ================ Peripheral memory map ================ */
/* ================================================================================ */
#define FLASH_BASE ((uint32_t)0x00000000)
#define SRAM_BASE ((uint32_t)0x20000000)
#define WATCHDOG0_BASE ((uint32_t)0x40000000)
#define WATCHDOG1_BASE ((uint32_t)0x40001000)
#define SSI0_BASE ((uint32_t)0x40008000)
#define SSI1_BASE ((uint32_t)0x40009000)
#define SSI2_BASE ((uint32_t)0x4000A000)
#define SSI3_BASE ((uint32_t)0x4000B000)
#define UART0_BASE ((uint32_t)0x4000C000)
#define UART1_BASE ((uint32_t)0x4000D000)
#define UART2_BASE ((uint32_t)0x4000E000)
#define UART3_BASE ((uint32_t)0x4000F000)
#define UART4_BASE ((uint32_t)0x40010000)
#define UART5_BASE ((uint32_t)0x40011000)
#define UART6_BASE ((uint32_t)0x40012000)
#define UART7_BASE ((uint32_t)0x40013000)
#define I2C0_BASE ((uint32_t)0x40020000)
#define I2C1_BASE ((uint32_t)0x40021000)
#define I2C2_BASE ((uint32_t)0x40022000)
#define I2C3_BASE ((uint32_t)0x40023000)
#define PWM0_BASE ((uint32_t)0x40028000)
#define QEI0_BASE ((uint32_t)0x4002C000)
#define TIMER0_BASE ((uint32_t)0x40030000)
#define TIMER1_BASE ((uint32_t)0x40031000)
#define TIMER2_BASE ((uint32_t)0x40032000)
#define TIMER3_BASE ((uint32_t)0x40033000)
#define TIMER4_BASE ((uint32_t)0x40034000)
#define TIMER5_BASE ((uint32_t)0x40035000)
#define ADC0_BASE ((uint32_t)0x40038000)
#define ADC1_BASE ((uint32_t)0x40039000)
#define COMP_BASE ((uint32_t)0x4003C000)
#define CAN0_BASE ((uint32_t)0x40040000)
#define CAN1_BASE ((uint32_t)0x40041000)
#define USB0_BASE ((uint32_t)0x40050000)
#define GPIO_PORTA_BASE ((uint32_t)0x40058000)
#define GPIO_PORTB_BASE ((uint32_t)0x40059000)
#define GPIO_PORTC_BASE ((uint32_t)0x4005A000)
#define GPIO_PORTD_BASE ((uint32_t)0x4005B000)
#define GPIO_PORTE_BASE ((uint32_t)0x4005C000)
#define GPIO_PORTF_BASE ((uint32_t)0x4005D000)
#define GPIO_PORTG_BASE ((uint32_t)0x4005E000)
#define GPIO_PORTH_BASE ((uint32_t)0x4005F000)
#define GPIO_PORTJ_BASE ((uint32_t)0x40060000)
#define GPIO_PORTK_BASE ((uint32_t)0x40061000)
#define GPIO_PORTL_BASE ((uint32_t)0x40062000)
#define GPIO_PORTM_BASE ((uint32_t)0x40063000)
#define GPIO_PORTN_BASE ((uint32_t)0x40064000)
#define GPIO_PORTP_BASE ((uint32_t)0x40065000)
#define GPIO_PORTQ_BASE ((uint32_t)0x40066000)
#define GPIO_PORTR_BASE ((uint32_t)0x40067000)
#define GPIO_PORTS_BASE ((uint32_t)0x40068000)
#define GPIO_PORTT_BASE ((uint32_t)0x40069000)
#define EEPROM_BASE ((uint32_t)0x400AF000)
#define ONEWIRE0_BASE ((uint32_t)0x400B6000)
#define I2C8_BASE ((uint32_t)0x400B8000)
#define I2C9_BASE ((uint32_t)0x400B9000)
#define I2C4_BASE ((uint32_t)0x400C0000)
#define I2C5_BASE ((uint32_t)0x400C1000)
#define I2C6_BASE ((uint32_t)0x400C2000)
#define I2C7_BASE ((uint32_t)0x400C3000)
#define EPI0_BASE ((uint32_t)0x400D0000)
#define TIMER6_BASE ((uint32_t)0x400E0000)
#define TIMER7_BASE ((uint32_t)0x400E1000)
#define EMAC0_BASE ((uint32_t)0x400EC000)
#define SYSEXC_BASE ((uint32_t)0x400F9000)
#define HIB_BASE ((uint32_t)0x400FC000)
#define FLASH_CTRL_BASE ((uint32_t)0x400FD000)
#define SYSCTL_BASE ((uint32_t)0x400FE000)
#define UDMA_BASE ((uint32_t)0x400FF000)
#define CCM0_BASE ((uint32_t)0x44030000)
#define CRC_BASE (CCM0_BASE+0x00000400)
#define SHAMD5_BASE ((uint32_t)0x44034000)
#define SHAMD5_DMA_BASE (CCM0_BASE+0x00000010)
#define AES_BASE ((uint32_t)0x44036000)
#define AES_DMA_BASE (CCM0_BASE+0x00000020)
#define DES_BASE ((uint32_t)0x44038000)
#define DES_DMA_BASE (CCM0_BASE+0x00000030)
#define LCD0_BASE ((uint32_t)0x44050000)
/* ================================================================================ */
/* ================ Peripheral declaration ================ */
/* ================================================================================ */
#define WATCHDOG0 ((WATCHDOG0_Type *) WATCHDOG0_BASE)
#define WATCHDOG1 ((WATCHDOG0_Type *) WATCHDOG1_BASE)
#define SSI0 ((SSI0_Type *) SSI0_BASE)
#define SSI1 ((SSI0_Type *) SSI1_BASE)
#define SSI2 ((SSI0_Type *) SSI2_BASE)
#define SSI3 ((SSI0_Type *) SSI3_BASE)
#define UART0 ((UART0_Type *) UART0_BASE)
#define UART1 ((UART0_Type *) UART1_BASE)
#define UART2 ((UART0_Type *) UART2_BASE)
#define UART3 ((UART0_Type *) UART3_BASE)
#define UART4 ((UART0_Type *) UART4_BASE)
#define UART5 ((UART0_Type *) UART5_BASE)
#define UART6 ((UART0_Type *) UART6_BASE)
#define UART7 ((UART0_Type *) UART7_BASE)
#define I2C0 ((I2C0_Type *) I2C0_BASE)
#define I2C1 ((I2C0_Type *) I2C1_BASE)
#define I2C2 ((I2C0_Type *) I2C2_BASE)
#define I2C3 ((I2C0_Type *) I2C3_BASE)
#define PWM0 ((PWM0_Type *) PWM0_BASE)
#define QEI0 ((QEI0_Type *) QEI0_BASE)
#define TIMER0 ((TIMER0_Type *) TIMER0_BASE)
#define TIMER1 ((TIMER0_Type *) TIMER1_BASE)
#define TIMER2 ((TIMER0_Type *) TIMER2_BASE)
#define TIMER3 ((TIMER0_Type *) TIMER3_BASE)
#define TIMER4 ((TIMER0_Type *) TIMER4_BASE)
#define TIMER5 ((TIMER0_Type *) TIMER5_BASE)
#define ADC0 ((ADC0_Type *) ADC0_BASE)
#define ADC1 ((ADC0_Type *) ADC1_BASE)
#define COMP ((COMP_Type *) COMP_BASE)
#define CAN0 ((CAN0_Type *) CAN0_BASE)
#define CAN1 ((CAN0_Type *) CAN1_BASE)
#define USB0 ((USB0_Type *) USB0_BASE)
#define GPIOA ((GPIO_Type *) GPIO_PORTA_BASE)
#define GPIOB ((GPIO_Type *) GPIO_PORTB_BASE)
#define GPIOC ((GPIO_Type *) GPIO_PORTC_BASE)
#define GPIOD ((GPIO_Type *) GPIO_PORTD_BASE)
#define GPIOE ((GPIO_Type *) GPIO_PORTE_BASE)
#define GPIOF ((GPIO_Type *) GPIO_PORTF_BASE)
#define GPIOG ((GPIO_Type *) GPIO_PORTG_BASE)
#define GPIOH ((GPIO_Type *) GPIO_PORTH_BASE)
#define GPIOJ ((GPIO_Type *) GPIO_PORTJ_BASE)
#define GPIOK ((GPIO_Type *) GPIO_PORTK_BASE)
#define GPIOL ((GPIO_Type *) GPIO_PORTL_BASE)
#define GPIOM ((GPIO_Type *) GPIO_PORTM_BASE)
#define GPION ((GPIO_Type *) GPIO_PORTN_BASE)
#define GPIOP ((GPIO_Type *) GPIO_PORTP_BASE)
#define GPIOQ ((GPIO_Type *) GPIO_PORTQ_BASE)
#define GPIOR ((GPIO_Type *) GPIO_PORTR_BASE)
#define GPIOS ((GPIO_Type *) GPIO_PORTS_BASE)
#define GPIOT ((GPIO_Type *) GPIO_PORTT_BASE)
#define EEPROM ((EEPROM_Type *) EEPROM_BASE)
#define ONEWIRE0 ((ONEWIRE0_Type *) ONEWIRE0_BASE)
#define I2C8 ((I2C0_Type *) I2C8_BASE)
#define I2C9 ((I2C0_Type *) I2C9_BASE)
#define I2C4 ((I2C0_Type *) I2C4_BASE)
#define I2C5 ((I2C0_Type *) I2C5_BASE)
#define I2C6 ((I2C0_Type *) I2C6_BASE)
#define I2C7 ((I2C0_Type *) I2C7_BASE)
#define EPI0 ((EPI0_Type *) EPI0_BASE)
#define TIMER6 ((TIMER0_Type *) TIMER6_BASE)
#define TIMER7 ((TIMER0_Type *) TIMER7_BASE)
#define EMAC0 ((EMAC0_Type *) EMAC0_BASE)
#define SYSEXC ((SYSEXC_Type *) SYSEXC_BASE)
#define HIB ((HIB_Type *) HIB_BASE)
#define FLASH_CTRL ((FLASH_CTRL_Type *) FLASH_CTRL_BASE)
#define SYSCTL ((SYSCTL_Type *) SYSCTL_BASE)
#define UDMA ((UDMA_Type *) UDMA_BASE)
#define CCM0 ((CCM0_Type *) CCM0_BASE)
#define CRC ((CRC_Type *) CRC_BASE)
#define SHAMD5 ((SHAMD5_Type *) SHAMD5_BASE)
#define SHAMD5_DMA ((SHAMD5_DMA_Type *) SHAMD5_DMA_BASE)
#define AES ((AES_Type *) AES_BASE)
#define AES_DMA ((AES_DMA_Type *) AES_DMA_BASE)
#define DES ((DES_Type *) DES_BASE)
#define DES_DMA ((DES_DMA_Type *) DES_DMA_BASE)
#define LCD0 ((LCD0_Type *) LCD0_BASE)
/** @} */ /* End of group Device_Peripheral_Registers */
/** @addtogroup Device_Peripheral_Bitfields
* @{
*/
//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_LOAD register.
//
//*****************************************************************************
#define WDT_LOAD_M 0xFFFFFFFF // Watchdog Load Value
#define WDT_LOAD_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_VALUE register.
//
//*****************************************************************************
#define WDT_VALUE_M 0xFFFFFFFF // Watchdog Value
#define WDT_VALUE_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_CTL register.
//
//*****************************************************************************
#define WDT_CTL_WRC 0x80000000 // Write Complete
#define WDT_CTL_INTTYPE 0x00000004 // Watchdog Interrupt Type
#define WDT_CTL_RESEN 0x00000002 // Watchdog Reset Enable
#define WDT_CTL_INTEN 0x00000001 // Watchdog Interrupt Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_ICR register.
//
//*****************************************************************************
#define WDT_ICR_M 0xFFFFFFFF // Watchdog Interrupt Clear
#define WDT_ICR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_RIS register.
//
//*****************************************************************************
#define WDT_RIS_WDTRIS 0x00000001 // Watchdog Raw Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_MIS register.
//
//*****************************************************************************
#define WDT_MIS_WDTMIS 0x00000001 // Watchdog Masked Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_TEST register.
//
//*****************************************************************************
#define WDT_TEST_STALL 0x00000100 // Watchdog Stall Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_LOCK register.
//
//*****************************************************************************
#define WDT_LOCK_M 0xFFFFFFFF // Watchdog Lock
#define WDT_LOCK_UNLOCKED 0x00000000 // Unlocked
#define WDT_LOCK_LOCKED 0x00000001 // Locked
#define WDT_LOCK_UNLOCK 0x1ACCE551 // Unlocks the watchdog timer
//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_CR0 register.
//
//*****************************************************************************
#define SSI_CR0_SCR_M 0x0000FF00 // SSI Serial Clock Rate
#define SSI_CR0_SPH 0x00000080 // SSI Serial Clock Phase
#define SSI_CR0_SPO 0x00000040 // SSI Serial Clock Polarity
#define SSI_CR0_FRF_M 0x00000030 // SSI Frame Format Select
#define SSI_CR0_FRF_MOTO 0x00000000 // Freescale SPI Frame Format
#define SSI_CR0_FRF_TI 0x00000010 // Synchronous Serial Frame Format
#define SSI_CR0_DSS_M 0x0000000F // SSI Data Size Select
#define SSI_CR0_DSS_4 0x00000003 // 4-bit data
#define SSI_CR0_DSS_5 0x00000004 // 5-bit data
#define SSI_CR0_DSS_6 0x00000005 // 6-bit data
#define SSI_CR0_DSS_7 0x00000006 // 7-bit data
#define SSI_CR0_DSS_8 0x00000007 // 8-bit data
#define SSI_CR0_DSS_9 0x00000008 // 9-bit data
#define SSI_CR0_DSS_10 0x00000009 // 10-bit data
#define SSI_CR0_DSS_11 0x0000000A // 11-bit data
#define SSI_CR0_DSS_12 0x0000000B // 12-bit data
#define SSI_CR0_DSS_13 0x0000000C // 13-bit data
#define SSI_CR0_DSS_14 0x0000000D // 14-bit data
#define SSI_CR0_DSS_15 0x0000000E // 15-bit data
#define SSI_CR0_DSS_16 0x0000000F // 16-bit data
#define SSI_CR0_SCR_S 8
//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_CR1 register.
//
//*****************************************************************************
#define SSI_CR1_EOM 0x00000800 // Stop Frame (End of Message)
#define SSI_CR1_FSSHLDFRM 0x00000400 // FSS Hold Frame
#define SSI_CR1_HSCLKEN 0x00000200 // High Speed Clock Enable
#define SSI_CR1_DIR 0x00000100 // SSI Direction of Operation
#define SSI_CR1_MODE_M 0x000000C0 // SSI Mode
#define SSI_CR1_MODE_LEGACY 0x00000000 // Legacy SSI mode
#define SSI_CR1_MODE_BI 0x00000040 // Bi-SSI mode
#define SSI_CR1_MODE_QUAD 0x00000080 // Quad-SSI Mode
#define SSI_CR1_MODE_ADVANCED 0x000000C0 // Advanced SSI Mode with 8-bit
// packet size
#define SSI_CR1_EOT 0x00000010 // End of Transmission
#define SSI_CR1_MS 0x00000004 // SSI Master/Slave Select
#define SSI_CR1_SSE 0x00000002 // SSI Synchronous Serial Port
// Enable
#define SSI_CR1_LBM 0x00000001 // SSI Loopback Mode
//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_DR register.
//
//*****************************************************************************
#define SSI_DR_DATA_M 0x0000FFFF // SSI Receive/Transmit Data
#define SSI_DR_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_SR register.
//
//*****************************************************************************
#define SSI_SR_BSY 0x00000010 // SSI Busy Bit
#define SSI_SR_RFF 0x00000008 // SSI Receive FIFO Full
#define SSI_SR_RNE 0x00000004 // SSI Receive FIFO Not Empty
#define SSI_SR_TNF 0x00000002 // SSI Transmit FIFO Not Full
#define SSI_SR_TFE 0x00000001 // SSI Transmit FIFO Empty
//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_CPSR register.
//
//*****************************************************************************
#define SSI_CPSR_CPSDVSR_M 0x000000FF // SSI Clock Prescale Divisor
#define SSI_CPSR_CPSDVSR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_IM register.
//
//*****************************************************************************
#define SSI_IM_EOTIM 0x00000040 // End of Transmit Interrupt Mask
#define SSI_IM_DMATXIM 0x00000020 // SSI Transmit DMA Interrupt Mask
#define SSI_IM_DMARXIM 0x00000010 // SSI Receive DMA Interrupt Mask
#define SSI_IM_TXIM 0x00000008 // SSI Transmit FIFO Interrupt Mask
#define SSI_IM_RXIM 0x00000004 // SSI Receive FIFO Interrupt Mask
#define SSI_IM_RTIM 0x00000002 // SSI Receive Time-Out Interrupt
// Mask
#define SSI_IM_RORIM 0x00000001 // SSI Receive Overrun Interrupt
// Mask
//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_RIS register.
//
//*****************************************************************************
#define SSI_RIS_EOTRIS 0x00000040 // End of Transmit Raw Interrupt
// Status
#define SSI_RIS_DMATXRIS 0x00000020 // SSI Transmit DMA Raw Interrupt
// Status
#define SSI_RIS_DMARXRIS 0x00000010 // SSI Receive DMA Raw Interrupt
// Status
#define SSI_RIS_TXRIS 0x00000008 // SSI Transmit FIFO Raw Interrupt
// Status
#define SSI_RIS_RXRIS 0x00000004 // SSI Receive FIFO Raw Interrupt
// Status
#define SSI_RIS_RTRIS 0x00000002 // SSI Receive Time-Out Raw
// Interrupt Status
#define SSI_RIS_RORRIS 0x00000001 // SSI Receive Overrun Raw
// Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_MIS register.
//
//*****************************************************************************
#define SSI_MIS_EOTMIS 0x00000040 // End of Transmit Masked Interrupt
// Status
#define SSI_MIS_DMATXMIS 0x00000020 // SSI Transmit DMA Masked
// Interrupt Status
#define SSI_MIS_DMARXMIS 0x00000010 // SSI Receive DMA Masked Interrupt
// Status
#define SSI_MIS_TXMIS 0x00000008 // SSI Transmit FIFO Masked
// Interrupt Status
#define SSI_MIS_RXMIS 0x00000004 // SSI Receive FIFO Masked
// Interrupt Status
#define SSI_MIS_RTMIS 0x00000002 // SSI Receive Time-Out Masked
// Interrupt Status
#define SSI_MIS_RORMIS 0x00000001 // SSI Receive Overrun Masked
// Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_ICR register.
//
//*****************************************************************************
#define SSI_ICR_EOTIC 0x00000040 // End of Transmit Interrupt Clear
#define SSI_ICR_DMATXIC 0x00000020 // SSI Transmit DMA Interrupt Clear
#define SSI_ICR_DMARXIC 0x00000010 // SSI Receive DMA Interrupt Clear
#define SSI_ICR_RTIC 0x00000002 // SSI Receive Time-Out Interrupt
// Clear
#define SSI_ICR_RORIC 0x00000001 // SSI Receive Overrun Interrupt
// Clear
//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_DMACTL register.
//
//*****************************************************************************
#define SSI_DMACTL_TXDMAE 0x00000002 // Transmit DMA Enable
#define SSI_DMACTL_RXDMAE 0x00000001 // Receive DMA Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_PP register.
//
//*****************************************************************************
#define SSI_PP_FSSHLDFRM 0x00000008 // FSS Hold Frame Capability
#define SSI_PP_MODE_M 0x00000006 // Mode of Operation
#define SSI_PP_MODE_LEGACY 0x00000000 // Legacy SSI mode
#define SSI_PP_MODE_ADVBI 0x00000002 // Legacy mode, Advanced SSI mode
// and Bi-SSI mode enabled
#define SSI_PP_MODE_ADVBIQUAD 0x00000004 // Legacy mode, Advanced mode,
// Bi-SSI and Quad-SSI mode enabled
#define SSI_PP_HSCLK 0x00000001 // High Speed Capability
//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_CC register.
//
//*****************************************************************************
#define SSI_CC_CS_M 0x0000000F // SSI Baud Clock Source
#define SSI_CC_CS_SYSPLL 0x00000000 // System clock (based on clock
// source and divisor factor)
#define SSI_CC_CS_PIOSC 0x00000005 // PIOSC
//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_DR register.
//
//*****************************************************************************
#define UART_DR_OE 0x00000800 // UART Overrun Error
#define UART_DR_BE 0x00000400 // UART Break Error
#define UART_DR_PE 0x00000200 // UART Parity Error
#define UART_DR_FE 0x00000100 // UART Framing Error
#define UART_DR_DATA_M 0x000000FF // Data Transmitted or Received
#define UART_DR_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_RSR register.
//
//*****************************************************************************
#define UART_RSR_OE 0x00000008 // UART Overrun Error
#define UART_RSR_BE 0x00000004 // UART Break Error
#define UART_RSR_PE 0x00000002 // UART Parity Error
#define UART_RSR_FE 0x00000001 // UART Framing Error
//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_ECR register.
//
//*****************************************************************************
#define UART_ECR_DATA_M 0x000000FF // Error Clear
#define UART_ECR_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_FR register.
//
//*****************************************************************************
#define UART_FR_RI 0x00000100 // Ring Indicator
#define UART_FR_TXFE 0x00000080 // UART Transmit FIFO Empty
#define UART_FR_RXFF 0x00000040 // UART Receive FIFO Full
#define UART_FR_TXFF 0x00000020 // UART Transmit FIFO Full
#define UART_FR_RXFE 0x00000010 // UART Receive FIFO Empty
#define UART_FR_BUSY 0x00000008 // UART Busy
#define UART_FR_DCD 0x00000004 // Data Carrier Detect
#define UART_FR_DSR 0x00000002 // Data Set Ready
#define UART_FR_CTS 0x00000001 // Clear To Send
//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_ILPR register.
//
//*****************************************************************************
#define UART_ILPR_ILPDVSR_M 0x000000FF // IrDA Low-Power Divisor
#define UART_ILPR_ILPDVSR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_IBRD register.
//
//*****************************************************************************
#define UART_IBRD_DIVINT_M 0x0000FFFF // Integer Baud-Rate Divisor
#define UART_IBRD_DIVINT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_FBRD register.
//
//*****************************************************************************
#define UART_FBRD_DIVFRAC_M 0x0000003F // Fractional Baud-Rate Divisor
#define UART_FBRD_DIVFRAC_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_LCRH register.
//
//*****************************************************************************
#define UART_LCRH_SPS 0x00000080 // UART Stick Parity Select
#define UART_LCRH_WLEN_M 0x00000060 // UART Word Length
#define UART_LCRH_WLEN_5 0x00000000 // 5 bits (default)
#define UART_LCRH_WLEN_6 0x00000020 // 6 bits
#define UART_LCRH_WLEN_7 0x00000040 // 7 bits
#define UART_LCRH_WLEN_8 0x00000060 // 8 bits
#define UART_LCRH_FEN 0x00000010 // UART Enable FIFOs
#define UART_LCRH_STP2 0x00000008 // UART Two Stop Bits Select
#define UART_LCRH_EPS 0x00000004 // UART Even Parity Select
#define UART_LCRH_PEN 0x00000002 // UART Parity Enable
#define UART_LCRH_BRK 0x00000001 // UART Send Break
//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_CTL register.
//
//*****************************************************************************
#define UART_CTL_CTSEN 0x00008000 // Enable Clear To Send
#define UART_CTL_RTSEN 0x00004000 // Enable Request to Send
#define UART_CTL_RTS 0x00000800 // Request to Send
#define UART_CTL_DTR 0x00000400 // Data Terminal Ready
#define UART_CTL_RXE 0x00000200 // UART Receive Enable
#define UART_CTL_TXE 0x00000100 // UART Transmit Enable
#define UART_CTL_LBE 0x00000080 // UART Loop Back Enable
#define UART_CTL_HSE 0x00000020 // High-Speed Enable
#define UART_CTL_EOT 0x00000010 // End of Transmission
#define UART_CTL_SMART 0x00000008 // ISO 7816 Smart Card Support
#define UART_CTL_SIRLP 0x00000004 // UART SIR Low-Power Mode
#define UART_CTL_SIREN 0x00000002 // UART SIR Enable
#define UART_CTL_UARTEN 0x00000001 // UART Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_IFLS register.
//
//*****************************************************************************
#define UART_IFLS_RX_M 0x00000038 // UART Receive Interrupt FIFO
// Level Select
#define UART_IFLS_RX1_8 0x00000000 // RX FIFO >= 1/8 full
#define UART_IFLS_RX2_8 0x00000008 // RX FIFO >= 1/4 full
#define UART_IFLS_RX4_8 0x00000010 // RX FIFO >= 1/2 full (default)
#define UART_IFLS_RX6_8 0x00000018 // RX FIFO >= 3/4 full
#define UART_IFLS_RX7_8 0x00000020 // RX FIFO >= 7/8 full
#define UART_IFLS_TX_M 0x00000007 // UART Transmit Interrupt FIFO
// Level Select
#define UART_IFLS_TX1_8 0x00000000 // TX FIFO <= 1/8 full
#define UART_IFLS_TX2_8 0x00000001 // TX FIFO <= 1/4 full
#define UART_IFLS_TX4_8 0x00000002 // TX FIFO <= 1/2 full (default)
#define UART_IFLS_TX6_8 0x00000003 // TX FIFO <= 3/4 full
#define UART_IFLS_TX7_8 0x00000004 // TX FIFO <= 7/8 full
//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_IM register.
//
//*****************************************************************************
#define UART_IM_DMATXIM 0x00020000 // Transmit DMA Interrupt Mask
#define UART_IM_DMARXIM 0x00010000 // Receive DMA Interrupt Mask
#define UART_IM_9BITIM 0x00001000 // 9-Bit Mode Interrupt Mask
#define UART_IM_EOTIM 0x00000800 // End of Transmission Interrupt
// Mask
#define UART_IM_OEIM 0x00000400 // UART Overrun Error Interrupt
// Mask
#define UART_IM_BEIM 0x00000200 // UART Break Error Interrupt Mask
#define UART_IM_PEIM 0x00000100 // UART Parity Error Interrupt Mask
#define UART_IM_FEIM 0x00000080 // UART Framing Error Interrupt
// Mask
#define UART_IM_RTIM 0x00000040 // UART Receive Time-Out Interrupt
// Mask
#define UART_IM_TXIM 0x00000020 // UART Transmit Interrupt Mask
#define UART_IM_RXIM 0x00000010 // UART Receive Interrupt Mask
#define UART_IM_DSRMIM 0x00000008 // UART Data Set Ready Modem
// Interrupt Mask
#define UART_IM_DCDMIM 0x00000004 // UART Data Carrier Detect Modem
// Interrupt Mask
#define UART_IM_CTSMIM 0x00000002 // UART Clear to Send Modem
// Interrupt Mask
#define UART_IM_RIMIM 0x00000001 // UART Ring Indicator Modem
// Interrupt Mask
//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_RIS register.
//
//*****************************************************************************
#define UART_RIS_DMATXRIS 0x00020000 // Transmit DMA Raw Interrupt
// Status
#define UART_RIS_DMARXRIS 0x00010000 // Receive DMA Raw Interrupt Status
#define UART_RIS_9BITRIS 0x00001000 // 9-Bit Mode Raw Interrupt Status
#define UART_RIS_EOTRIS 0x00000800 // End of Transmission Raw
// Interrupt Status
#define UART_RIS_OERIS 0x00000400 // UART Overrun Error Raw Interrupt
// Status
#define UART_RIS_BERIS 0x00000200 // UART Break Error Raw Interrupt
// Status
#define UART_RIS_PERIS 0x00000100 // UART Parity Error Raw Interrupt
// Status
#define UART_RIS_FERIS 0x00000080 // UART Framing Error Raw Interrupt
// Status
#define UART_RIS_RTRIS 0x00000040 // UART Receive Time-Out Raw
// Interrupt Status
#define UART_RIS_TXRIS 0x00000020 // UART Transmit Raw Interrupt
// Status
#define UART_RIS_RXRIS 0x00000010 // UART Receive Raw Interrupt
// Status
#define UART_RIS_DSRRIS 0x00000008 // UART Data Set Ready Modem Raw
// Interrupt Status
#define UART_RIS_DCDRIS 0x00000004 // UART Data Carrier Detect Modem
// Raw Interrupt Status
#define UART_RIS_CTSRIS 0x00000002 // UART Clear to Send Modem Raw
// Interrupt Status
#define UART_RIS_RIRIS 0x00000001 // UART Ring Indicator Modem Raw
// Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_MIS register.
//
//*****************************************************************************
#define UART_MIS_DMATXMIS 0x00020000 // Transmit DMA Masked Interrupt
// Status
#define UART_MIS_DMARXMIS 0x00010000 // Receive DMA Masked Interrupt
// Status
#define UART_MIS_9BITMIS 0x00001000 // 9-Bit Mode Masked Interrupt
// Status
#define UART_MIS_EOTMIS 0x00000800 // End of Transmission Masked
// Interrupt Status
#define UART_MIS_OEMIS 0x00000400 // UART Overrun Error Masked
// Interrupt Status
#define UART_MIS_BEMIS 0x00000200 // UART Break Error Masked
// Interrupt Status
#define UART_MIS_PEMIS 0x00000100 // UART Parity Error Masked
// Interrupt Status
#define UART_MIS_FEMIS 0x00000080 // UART Framing Error Masked
// Interrupt Status
#define UART_MIS_RTMIS 0x00000040 // UART Receive Time-Out Masked
// Interrupt Status
#define UART_MIS_TXMIS 0x00000020 // UART Transmit Masked Interrupt
// Status
#define UART_MIS_RXMIS 0x00000010 // UART Receive Masked Interrupt
// Status
#define UART_MIS_DSRMIS 0x00000008 // UART Data Set Ready Modem Masked
// Interrupt Status
#define UART_MIS_DCDMIS 0x00000004 // UART Data Carrier Detect Modem
// Masked Interrupt Status
#define UART_MIS_CTSMIS 0x00000002 // UART Clear to Send Modem Masked
// Interrupt Status
#define UART_MIS_RIMIS 0x00000001 // UART Ring Indicator Modem Masked
// Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_ICR register.
//
//*****************************************************************************
#define UART_ICR_DMATXIC 0x00020000 // Transmit DMA Interrupt Clear
#define UART_ICR_DMARXIC 0x00010000 // Receive DMA Interrupt Clear
#define UART_ICR_9BITIC 0x00001000 // 9-Bit Mode Interrupt Clear
#define UART_ICR_EOTIC 0x00000800 // End of Transmission Interrupt
// Clear
#define UART_ICR_OEIC 0x00000400 // Overrun Error Interrupt Clear
#define UART_ICR_BEIC 0x00000200 // Break Error Interrupt Clear
#define UART_ICR_PEIC 0x00000100 // Parity Error Interrupt Clear
#define UART_ICR_FEIC 0x00000080 // Framing Error Interrupt Clear
#define UART_ICR_RTIC 0x00000040 // Receive Time-Out Interrupt Clear
#define UART_ICR_TXIC 0x00000020 // Transmit Interrupt Clear
#define UART_ICR_RXIC 0x00000010 // Receive Interrupt Clear
#define UART_ICR_DSRMIC 0x00000008 // UART Data Set Ready Modem
// Interrupt Clear
#define UART_ICR_DCDMIC 0x00000004 // UART Data Carrier Detect Modem
// Interrupt Clear
#define UART_ICR_CTSMIC 0x00000002 // UART Clear to Send Modem
// Interrupt Clear
#define UART_ICR_RIMIC 0x00000001 // UART Ring Indicator Modem
// Interrupt Clear
//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_DMACTL register.
//
//*****************************************************************************
#define UART_DMACTL_DMAERR 0x00000004 // DMA on Error
#define UART_DMACTL_TXDMAE 0x00000002 // Transmit DMA Enable
#define UART_DMACTL_RXDMAE 0x00000001 // Receive DMA Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_9BITADDR
// register.
//
//*****************************************************************************
#define UART_9BITADDR_9BITEN 0x00008000 // Enable 9-Bit Mode
#define UART_9BITADDR_ADDR_M 0x000000FF // Self Address for 9-Bit Mode
#define UART_9BITADDR_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_9BITAMASK
// register.
//
//*****************************************************************************
#define UART_9BITAMASK_MASK_M 0x000000FF // Self Address Mask for 9-Bit Mode
#define UART_9BITAMASK_MASK_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_PP register.
//
//*****************************************************************************
#define UART_PP_MSE 0x00000008 // Modem Support Extended
#define UART_PP_MS 0x00000004 // Modem Support
#define UART_PP_NB 0x00000002 // 9-Bit Support
#define UART_PP_SC 0x00000001 // Smart Card Support
//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_CC register.
//
//*****************************************************************************
#define UART_CC_CS_M 0x0000000F // UART Baud Clock Source
#define UART_CC_CS_SYSCLK 0x00000000 // System clock (based on clock
// source and divisor factor)
#define UART_CC_CS_PIOSC 0x00000005 // PIOSC
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_MSA register.
//
//*****************************************************************************
#define I2C_MSA_SA_M 0x000000FE // I2C Slave Address
#define I2C_MSA_RS 0x00000001 // Receive not send
#define I2C_MSA_SA_S 1
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_MCS register.
//
//*****************************************************************************
#define I2C_MCS_ACTDMARX 0x80000000 // DMA RX Active Status
#define I2C_MCS_ACTDMATX 0x40000000 // DMA TX Active Status
#define I2C_MCS_CLKTO 0x00000080 // Clock Timeout Error
#define I2C_MCS_BURST 0x00000040 // Burst Enable
#define I2C_MCS_BUSBSY 0x00000040 // Bus Busy
#define I2C_MCS_IDLE 0x00000020 // I2C Idle
#define I2C_MCS_QCMD 0x00000020 // Quick Command
#define I2C_MCS_ARBLST 0x00000010 // Arbitration Lost
#define I2C_MCS_HS 0x00000010 // High-Speed Enable
#define I2C_MCS_ACK 0x00000008 // Data Acknowledge Enable
#define I2C_MCS_DATACK 0x00000008 // Acknowledge Data
#define I2C_MCS_ADRACK 0x00000004 // Acknowledge Address
#define I2C_MCS_STOP 0x00000004 // Generate STOP
#define I2C_MCS_ERROR 0x00000002 // Error
#define I2C_MCS_START 0x00000002 // Generate START
#define I2C_MCS_RUN 0x00000001 // I2C Master Enable
#define I2C_MCS_BUSY 0x00000001 // I2C Busy
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_MDR register.
//
//*****************************************************************************
#define I2C_MDR_DATA_M 0x000000FF // This byte contains the data
// transferred during a transaction
#define I2C_MDR_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_MTPR register.
//
//*****************************************************************************
#define I2C_MTPR_PULSEL_M 0x00070000 // Glitch Suppression Pulse Width
#define I2C_MTPR_PULSEL_BYPASS 0x00000000 // Bypass
#define I2C_MTPR_PULSEL_1 0x00010000 // 1 clock
#define I2C_MTPR_PULSEL_2 0x00020000 // 2 clocks
#define I2C_MTPR_PULSEL_3 0x00030000 // 3 clocks
#define I2C_MTPR_PULSEL_4 0x00040000 // 4 clocks
#define I2C_MTPR_PULSEL_8 0x00050000 // 8 clocks
#define I2C_MTPR_PULSEL_16 0x00060000 // 16 clocks
#define I2C_MTPR_PULSEL_31 0x00070000 // 31 clocks
#define I2C_MTPR_HS 0x00000080 // High-Speed Enable
#define I2C_MTPR_TPR_M 0x0000007F // Timer Period
#define I2C_MTPR_TPR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_MIMR register.
//
//*****************************************************************************
#define I2C_MIMR_RXFFIM 0x00000800 // Receive FIFO Full Interrupt Mask
#define I2C_MIMR_TXFEIM 0x00000400 // Transmit FIFO Empty Interrupt
// Mask
#define I2C_MIMR_RXIM 0x00000200 // Receive FIFO Request Interrupt
// Mask
#define I2C_MIMR_TXIM 0x00000100 // Transmit FIFO Request Interrupt
// Mask
#define I2C_MIMR_ARBLOSTIM 0x00000080 // Arbitration Lost Interrupt Mask
#define I2C_MIMR_STOPIM 0x00000040 // STOP Detection Interrupt Mask
#define I2C_MIMR_STARTIM 0x00000020 // START Detection Interrupt Mask
#define I2C_MIMR_NACKIM 0x00000010 // Address/Data NACK Interrupt Mask
#define I2C_MIMR_DMATXIM 0x00000008 // Transmit DMA Interrupt Mask
#define I2C_MIMR_DMARXIM 0x00000004 // Receive DMA Interrupt Mask
#define I2C_MIMR_CLKIM 0x00000002 // Clock Timeout Interrupt Mask
#define I2C_MIMR_IM 0x00000001 // Master Interrupt Mask
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_MRIS register.
//
//*****************************************************************************
#define I2C_MRIS_RXFFRIS 0x00000800 // Receive FIFO Full Raw Interrupt
// Status
#define I2C_MRIS_TXFERIS 0x00000400 // Transmit FIFO Empty Raw
// Interrupt Status
#define I2C_MRIS_RXRIS 0x00000200 // Receive FIFO Request Raw
// Interrupt Status
#define I2C_MRIS_TXRIS 0x00000100 // Transmit Request Raw Interrupt
// Status
#define I2C_MRIS_ARBLOSTRIS 0x00000080 // Arbitration Lost Raw Interrupt
// Status
#define I2C_MRIS_STOPRIS 0x00000040 // STOP Detection Raw Interrupt
// Status
#define I2C_MRIS_STARTRIS 0x00000020 // START Detection Raw Interrupt
// Status
#define I2C_MRIS_NACKRIS 0x00000010 // Address/Data NACK Raw Interrupt
// Status
#define I2C_MRIS_DMATXRIS 0x00000008 // Transmit DMA Raw Interrupt
// Status
#define I2C_MRIS_DMARXRIS 0x00000004 // Receive DMA Raw Interrupt Status
#define I2C_MRIS_CLKRIS 0x00000002 // Clock Timeout Raw Interrupt
// Status
#define I2C_MRIS_RIS 0x00000001 // Master Raw Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_MMIS register.
//
//*****************************************************************************
#define I2C_MMIS_RXFFMIS 0x00000800 // Receive FIFO Full Interrupt Mask
#define I2C_MMIS_TXFEMIS 0x00000400 // Transmit FIFO Empty Interrupt
// Mask
#define I2C_MMIS_RXMIS 0x00000200 // Receive FIFO Request Interrupt
// Mask
#define I2C_MMIS_TXMIS 0x00000100 // Transmit Request Interrupt Mask
#define I2C_MMIS_ARBLOSTMIS 0x00000080 // Arbitration Lost Interrupt Mask
#define I2C_MMIS_STOPMIS 0x00000040 // STOP Detection Interrupt Mask
#define I2C_MMIS_STARTMIS 0x00000020 // START Detection Interrupt Mask
#define I2C_MMIS_NACKMIS 0x00000010 // Address/Data NACK Interrupt Mask
#define I2C_MMIS_DMATXMIS 0x00000008 // Transmit DMA Interrupt Status
#define I2C_MMIS_DMARXMIS 0x00000004 // Receive DMA Interrupt Status
#define I2C_MMIS_CLKMIS 0x00000002 // Clock Timeout Masked Interrupt
// Status
#define I2C_MMIS_MIS 0x00000001 // Masked Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_MICR register.
//
//*****************************************************************************
#define I2C_MICR_RXFFIC 0x00000800 // Receive FIFO Full Interrupt
// Clear
#define I2C_MICR_TXFEIC 0x00000400 // Transmit FIFO Empty Interrupt
// Clear
#define I2C_MICR_RXIC 0x00000200 // Receive FIFO Request Interrupt
// Clear
#define I2C_MICR_TXIC 0x00000100 // Transmit FIFO Request Interrupt
// Clear
#define I2C_MICR_ARBLOSTIC 0x00000080 // Arbitration Lost Interrupt Clear
#define I2C_MICR_STOPIC 0x00000040 // STOP Detection Interrupt Clear
#define I2C_MICR_STARTIC 0x00000020 // START Detection Interrupt Clear
#define I2C_MICR_NACKIC 0x00000010 // Address/Data NACK Interrupt
// Clear
#define I2C_MICR_DMATXIC 0x00000008 // Transmit DMA Interrupt Clear
#define I2C_MICR_DMARXIC 0x00000004 // Receive DMA Interrupt Clear
#define I2C_MICR_CLKIC 0x00000002 // Clock Timeout Interrupt Clear
#define I2C_MICR_IC 0x00000001 // Master Interrupt Clear
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_MCR register.
//
//*****************************************************************************
#define I2C_MCR_SFE 0x00000020 // I2C Slave Function Enable
#define I2C_MCR_MFE 0x00000010 // I2C Master Function Enable
#define I2C_MCR_LPBK 0x00000001 // I2C Loopback
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_MCLKOCNT register.
//
//*****************************************************************************
#define I2C_MCLKOCNT_CNTL_M 0x000000FF // I2C Master Count
#define I2C_MCLKOCNT_CNTL_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_MBMON register.
//
//*****************************************************************************
#define I2C_MBMON_SDA 0x00000002 // I2C SDA Status
#define I2C_MBMON_SCL 0x00000001 // I2C SCL Status
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_MBLEN register.
//
//*****************************************************************************
#define I2C_MBLEN_CNTL_M 0x000000FF // I2C Burst Length
#define I2C_MBLEN_CNTL_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_MBCNT register.
//
//*****************************************************************************
#define I2C_MBCNT_CNTL_M 0x000000FF // I2C Master Burst Count
#define I2C_MBCNT_CNTL_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_SOAR register.
//
//*****************************************************************************
#define I2C_SOAR_OAR_M 0x0000007F // I2C Slave Own Address
#define I2C_SOAR_OAR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_SCSR register.
//
//*****************************************************************************
#define I2C_SCSR_ACTDMARX 0x80000000 // DMA RX Active Status
#define I2C_SCSR_ACTDMATX 0x40000000 // DMA TX Active Status
#define I2C_SCSR_QCMDRW 0x00000020 // Quick Command Read / Write
#define I2C_SCSR_QCMDST 0x00000010 // Quick Command Status
#define I2C_SCSR_OAR2SEL 0x00000008 // OAR2 Address Matched
#define I2C_SCSR_FBR 0x00000004 // First Byte Received
#define I2C_SCSR_RXFIFO 0x00000004 // RX FIFO Enable
#define I2C_SCSR_TXFIFO 0x00000002 // TX FIFO Enable
#define I2C_SCSR_TREQ 0x00000002 // Transmit Request
#define I2C_SCSR_DA 0x00000001 // Device Active
#define I2C_SCSR_RREQ 0x00000001 // Receive Request
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_SDR register.
//
//*****************************************************************************
#define I2C_SDR_DATA_M 0x000000FF // Data for Transfer
#define I2C_SDR_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_SIMR register.
//
//*****************************************************************************
#define I2C_SIMR_RXFFIM 0x00000100 // Receive FIFO Full Interrupt Mask
#define I2C_SIMR_TXFEIM 0x00000080 // Transmit FIFO Empty Interrupt
// Mask
#define I2C_SIMR_RXIM 0x00000040 // Receive FIFO Request Interrupt
// Mask
#define I2C_SIMR_TXIM 0x00000020 // Transmit FIFO Request Interrupt
// Mask
#define I2C_SIMR_DMATXIM 0x00000010 // Transmit DMA Interrupt Mask
#define I2C_SIMR_DMARXIM 0x00000008 // Receive DMA Interrupt Mask
#define I2C_SIMR_STOPIM 0x00000004 // Stop Condition Interrupt Mask
#define I2C_SIMR_STARTIM 0x00000002 // Start Condition Interrupt Mask
#define I2C_SIMR_DATAIM 0x00000001 // Data Interrupt Mask
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_SRIS register.
//
//*****************************************************************************
#define I2C_SRIS_RXFFRIS 0x00000100 // Receive FIFO Full Raw Interrupt
// Status
#define I2C_SRIS_TXFERIS 0x00000080 // Transmit FIFO Empty Raw
// Interrupt Status
#define I2C_SRIS_RXRIS 0x00000040 // Receive FIFO Request Raw
// Interrupt Status
#define I2C_SRIS_TXRIS 0x00000020 // Transmit Request Raw Interrupt
// Status
#define I2C_SRIS_DMATXRIS 0x00000010 // Transmit DMA Raw Interrupt
// Status
#define I2C_SRIS_DMARXRIS 0x00000008 // Receive DMA Raw Interrupt Status
#define I2C_SRIS_STOPRIS 0x00000004 // Stop Condition Raw Interrupt
// Status
#define I2C_SRIS_STARTRIS 0x00000002 // Start Condition Raw Interrupt
// Status
#define I2C_SRIS_DATARIS 0x00000001 // Data Raw Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_SMIS register.
//
//*****************************************************************************
#define I2C_SMIS_RXFFMIS 0x00000100 // Receive FIFO Full Interrupt Mask
#define I2C_SMIS_TXFEMIS 0x00000080 // Transmit FIFO Empty Interrupt
// Mask
#define I2C_SMIS_RXMIS 0x00000040 // Receive FIFO Request Interrupt
// Mask
#define I2C_SMIS_TXMIS 0x00000020 // Transmit FIFO Request Interrupt
// Mask
#define I2C_SMIS_DMATXMIS 0x00000010 // Transmit DMA Masked Interrupt
// Status
#define I2C_SMIS_DMARXMIS 0x00000008 // Receive DMA Masked Interrupt
// Status
#define I2C_SMIS_STOPMIS 0x00000004 // Stop Condition Masked Interrupt
// Status
#define I2C_SMIS_STARTMIS 0x00000002 // Start Condition Masked Interrupt
// Status
#define I2C_SMIS_DATAMIS 0x00000001 // Data Masked Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_SICR register.
//
//*****************************************************************************
#define I2C_SICR_RXFFIC 0x00000100 // Receive FIFO Full Interrupt Mask
#define I2C_SICR_TXFEIC 0x00000080 // Transmit FIFO Empty Interrupt
// Mask
#define I2C_SICR_RXIC 0x00000040 // Receive Request Interrupt Mask
#define I2C_SICR_TXIC 0x00000020 // Transmit Request Interrupt Mask
#define I2C_SICR_DMATXIC 0x00000010 // Transmit DMA Interrupt Clear
#define I2C_SICR_DMARXIC 0x00000008 // Receive DMA Interrupt Clear
#define I2C_SICR_STOPIC 0x00000004 // Stop Condition Interrupt Clear
#define I2C_SICR_STARTIC 0x00000002 // Start Condition Interrupt Clear
#define I2C_SICR_DATAIC 0x00000001 // Data Interrupt Clear
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_SOAR2 register.
//
//*****************************************************************************
#define I2C_SOAR2_OAR2EN 0x00000080 // I2C Slave Own Address 2 Enable
#define I2C_SOAR2_OAR2_M 0x0000007F // I2C Slave Own Address 2
#define I2C_SOAR2_OAR2_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_SACKCTL register.
//
//*****************************************************************************
#define I2C_SACKCTL_ACKOVAL 0x00000002 // I2C Slave ACK Override Value
#define I2C_SACKCTL_ACKOEN 0x00000001 // I2C Slave ACK Override Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_FIFODATA register.
//
//*****************************************************************************
#define I2C_FIFODATA_DATA_M 0x000000FF // I2C TX FIFO Write Data Byte
#define I2C_FIFODATA_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_FIFOCTL register.
//
//*****************************************************************************
#define I2C_FIFOCTL_RXASGNMT 0x80000000 // RX Control Assignment
#define I2C_FIFOCTL_RXFLUSH 0x40000000 // RX FIFO Flush
#define I2C_FIFOCTL_DMARXENA 0x20000000 // DMA RX Channel Enable
#define I2C_FIFOCTL_RXTRIG_M 0x00070000 // RX FIFO Trigger
#define I2C_FIFOCTL_TXASGNMT 0x00008000 // TX Control Assignment
#define I2C_FIFOCTL_TXFLUSH 0x00004000 // TX FIFO Flush
#define I2C_FIFOCTL_DMATXENA 0x00002000 // DMA TX Channel Enable
#define I2C_FIFOCTL_TXTRIG_M 0x00000007 // TX FIFO Trigger
#define I2C_FIFOCTL_RXTRIG_S 16
#define I2C_FIFOCTL_TXTRIG_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_FIFOSTATUS
// register.
//
//*****************************************************************************
#define I2C_FIFOSTATUS_RXABVTRIG \
0x00040000 // RX FIFO Above Trigger Level
#define I2C_FIFOSTATUS_RXFF 0x00020000 // RX FIFO Full
#define I2C_FIFOSTATUS_RXFE 0x00010000 // RX FIFO Empty
#define I2C_FIFOSTATUS_TXBLWTRIG \
0x00000004 // TX FIFO Below Trigger Level
#define I2C_FIFOSTATUS_TXFF 0x00000002 // TX FIFO Full
#define I2C_FIFOSTATUS_TXFE 0x00000001 // TX FIFO Empty
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_PP register.
//
//*****************************************************************************
#define I2C_PP_HS 0x00000001 // High-Speed Capable
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_PC register.
//
//*****************************************************************************
#define I2C_PC_HS 0x00000001 // High-Speed Capable
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_CTL register.
//
//*****************************************************************************
#define PWM_CTL_GLOBALSYNC3 0x00000008 // Update PWM Generator 3
#define PWM_CTL_GLOBALSYNC2 0x00000004 // Update PWM Generator 2
#define PWM_CTL_GLOBALSYNC1 0x00000002 // Update PWM Generator 1
#define PWM_CTL_GLOBALSYNC0 0x00000001 // Update PWM Generator 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_SYNC register.
//
//*****************************************************************************
#define PWM_SYNC_SYNC3 0x00000008 // Reset Generator 3 Counter
#define PWM_SYNC_SYNC2 0x00000004 // Reset Generator 2 Counter
#define PWM_SYNC_SYNC1 0x00000002 // Reset Generator 1 Counter
#define PWM_SYNC_SYNC0 0x00000001 // Reset Generator 0 Counter
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_ENABLE register.
//
//*****************************************************************************
#define PWM_ENABLE_PWM7EN 0x00000080 // MnPWM7 Output Enable
#define PWM_ENABLE_PWM6EN 0x00000040 // MnPWM6 Output Enable
#define PWM_ENABLE_PWM5EN 0x00000020 // MnPWM5 Output Enable
#define PWM_ENABLE_PWM4EN 0x00000010 // MnPWM4 Output Enable
#define PWM_ENABLE_PWM3EN 0x00000008 // MnPWM3 Output Enable
#define PWM_ENABLE_PWM2EN 0x00000004 // MnPWM2 Output Enable
#define PWM_ENABLE_PWM1EN 0x00000002 // MnPWM1 Output Enable
#define PWM_ENABLE_PWM0EN 0x00000001 // MnPWM0 Output Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_INVERT register.
//
//*****************************************************************************
#define PWM_INVERT_PWM7INV 0x00000080 // Invert MnPWM7 Signal
#define PWM_INVERT_PWM6INV 0x00000040 // Invert MnPWM6 Signal
#define PWM_INVERT_PWM5INV 0x00000020 // Invert MnPWM5 Signal
#define PWM_INVERT_PWM4INV 0x00000010 // Invert MnPWM4 Signal
#define PWM_INVERT_PWM3INV 0x00000008 // Invert MnPWM3 Signal
#define PWM_INVERT_PWM2INV 0x00000004 // Invert MnPWM2 Signal
#define PWM_INVERT_PWM1INV 0x00000002 // Invert MnPWM1 Signal
#define PWM_INVERT_PWM0INV 0x00000001 // Invert MnPWM0 Signal
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_FAULT register.
//
//*****************************************************************************
#define PWM_FAULT_FAULT7 0x00000080 // MnPWM7 Fault
#define PWM_FAULT_FAULT6 0x00000040 // MnPWM6 Fault
#define PWM_FAULT_FAULT5 0x00000020 // MnPWM5 Fault
#define PWM_FAULT_FAULT4 0x00000010 // MnPWM4 Fault
#define PWM_FAULT_FAULT3 0x00000008 // MnPWM3 Fault
#define PWM_FAULT_FAULT2 0x00000004 // MnPWM2 Fault
#define PWM_FAULT_FAULT1 0x00000002 // MnPWM1 Fault
#define PWM_FAULT_FAULT0 0x00000001 // MnPWM0 Fault
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_INTEN register.
//
//*****************************************************************************
#define PWM_INTEN_INTFAULT3 0x00080000 // Interrupt Fault 3
#define PWM_INTEN_INTFAULT2 0x00040000 // Interrupt Fault 2
#define PWM_INTEN_INTFAULT1 0x00020000 // Interrupt Fault 1
#define PWM_INTEN_INTFAULT0 0x00010000 // Interrupt Fault 0
#define PWM_INTEN_INTPWM3 0x00000008 // PWM3 Interrupt Enable
#define PWM_INTEN_INTPWM2 0x00000004 // PWM2 Interrupt Enable
#define PWM_INTEN_INTPWM1 0x00000002 // PWM1 Interrupt Enable
#define PWM_INTEN_INTPWM0 0x00000001 // PWM0 Interrupt Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_RIS register.
//
//*****************************************************************************
#define PWM_RIS_INTFAULT3 0x00080000 // Interrupt Fault PWM 3
#define PWM_RIS_INTFAULT2 0x00040000 // Interrupt Fault PWM 2
#define PWM_RIS_INTFAULT1 0x00020000 // Interrupt Fault PWM 1
#define PWM_RIS_INTFAULT0 0x00010000 // Interrupt Fault PWM 0
#define PWM_RIS_INTPWM3 0x00000008 // PWM3 Interrupt Asserted
#define PWM_RIS_INTPWM2 0x00000004 // PWM2 Interrupt Asserted
#define PWM_RIS_INTPWM1 0x00000002 // PWM1 Interrupt Asserted
#define PWM_RIS_INTPWM0 0x00000001 // PWM0 Interrupt Asserted
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_ISC register.
//
//*****************************************************************************
#define PWM_ISC_INTFAULT3 0x00080000 // FAULT3 Interrupt Asserted
#define PWM_ISC_INTFAULT2 0x00040000 // FAULT2 Interrupt Asserted
#define PWM_ISC_INTFAULT1 0x00020000 // FAULT1 Interrupt Asserted
#define PWM_ISC_INTFAULT0 0x00010000 // FAULT0 Interrupt Asserted
#define PWM_ISC_INTPWM3 0x00000008 // PWM3 Interrupt Status
#define PWM_ISC_INTPWM2 0x00000004 // PWM2 Interrupt Status
#define PWM_ISC_INTPWM1 0x00000002 // PWM1 Interrupt Status
#define PWM_ISC_INTPWM0 0x00000001 // PWM0 Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_STATUS register.
//
//*****************************************************************************
#define PWM_STATUS_FAULT3 0x00000008 // Generator 3 Fault Status
#define PWM_STATUS_FAULT2 0x00000004 // Generator 2 Fault Status
#define PWM_STATUS_FAULT1 0x00000002 // Generator 1 Fault Status
#define PWM_STATUS_FAULT0 0x00000001 // Generator 0 Fault Status
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_FAULTVAL register.
//
//*****************************************************************************
#define PWM_FAULTVAL_PWM7 0x00000080 // MnPWM7 Fault Value
#define PWM_FAULTVAL_PWM6 0x00000040 // MnPWM6 Fault Value
#define PWM_FAULTVAL_PWM5 0x00000020 // MnPWM5 Fault Value
#define PWM_FAULTVAL_PWM4 0x00000010 // MnPWM4 Fault Value
#define PWM_FAULTVAL_PWM3 0x00000008 // MnPWM3 Fault Value
#define PWM_FAULTVAL_PWM2 0x00000004 // MnPWM2 Fault Value
#define PWM_FAULTVAL_PWM1 0x00000002 // MnPWM1 Fault Value
#define PWM_FAULTVAL_PWM0 0x00000001 // MnPWM0 Fault Value
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_ENUPD register.
//
//*****************************************************************************
#define PWM_ENUPD_ENUPD7_M 0x0000C000 // MnPWM7 Enable Update Mode
#define PWM_ENUPD_ENUPD7_IMM 0x00000000 // Immediate
#define PWM_ENUPD_ENUPD7_LSYNC 0x00008000 // Locally Synchronized
#define PWM_ENUPD_ENUPD7_GSYNC 0x0000C000 // Globally Synchronized
#define PWM_ENUPD_ENUPD6_M 0x00003000 // MnPWM6 Enable Update Mode
#define PWM_ENUPD_ENUPD6_IMM 0x00000000 // Immediate
#define PWM_ENUPD_ENUPD6_LSYNC 0x00002000 // Locally Synchronized
#define PWM_ENUPD_ENUPD6_GSYNC 0x00003000 // Globally Synchronized
#define PWM_ENUPD_ENUPD5_M 0x00000C00 // MnPWM5 Enable Update Mode
#define PWM_ENUPD_ENUPD5_IMM 0x00000000 // Immediate
#define PWM_ENUPD_ENUPD5_LSYNC 0x00000800 // Locally Synchronized
#define PWM_ENUPD_ENUPD5_GSYNC 0x00000C00 // Globally Synchronized
#define PWM_ENUPD_ENUPD4_M 0x00000300 // MnPWM4 Enable Update Mode
#define PWM_ENUPD_ENUPD4_IMM 0x00000000 // Immediate
#define PWM_ENUPD_ENUPD4_LSYNC 0x00000200 // Locally Synchronized
#define PWM_ENUPD_ENUPD4_GSYNC 0x00000300 // Globally Synchronized
#define PWM_ENUPD_ENUPD3_M 0x000000C0 // MnPWM3 Enable Update Mode
#define PWM_ENUPD_ENUPD3_IMM 0x00000000 // Immediate
#define PWM_ENUPD_ENUPD3_LSYNC 0x00000080 // Locally Synchronized
#define PWM_ENUPD_ENUPD3_GSYNC 0x000000C0 // Globally Synchronized
#define PWM_ENUPD_ENUPD2_M 0x00000030 // MnPWM2 Enable Update Mode
#define PWM_ENUPD_ENUPD2_IMM 0x00000000 // Immediate
#define PWM_ENUPD_ENUPD2_LSYNC 0x00000020 // Locally Synchronized
#define PWM_ENUPD_ENUPD2_GSYNC 0x00000030 // Globally Synchronized
#define PWM_ENUPD_ENUPD1_M 0x0000000C // MnPWM1 Enable Update Mode
#define PWM_ENUPD_ENUPD1_IMM 0x00000000 // Immediate
#define PWM_ENUPD_ENUPD1_LSYNC 0x00000008 // Locally Synchronized
#define PWM_ENUPD_ENUPD1_GSYNC 0x0000000C // Globally Synchronized
#define PWM_ENUPD_ENUPD0_M 0x00000003 // MnPWM0 Enable Update Mode
#define PWM_ENUPD_ENUPD0_IMM 0x00000000 // Immediate
#define PWM_ENUPD_ENUPD0_LSYNC 0x00000002 // Locally Synchronized
#define PWM_ENUPD_ENUPD0_GSYNC 0x00000003 // Globally Synchronized
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_0_CTL register.
//
//*****************************************************************************
#define PWM_0_CTL_LATCH 0x00040000 // Latch Fault Input
#define PWM_0_CTL_MINFLTPER 0x00020000 // Minimum Fault Period
#define PWM_0_CTL_FLTSRC 0x00010000 // Fault Condition Source
#define PWM_0_CTL_DBFALLUPD_M 0x0000C000 // PWMnDBFALL Update Mode
#define PWM_0_CTL_DBFALLUPD_I 0x00000000 // Immediate
#define PWM_0_CTL_DBFALLUPD_LS 0x00008000 // Locally Synchronized
#define PWM_0_CTL_DBFALLUPD_GS 0x0000C000 // Globally Synchronized
#define PWM_0_CTL_DBRISEUPD_M 0x00003000 // PWMnDBRISE Update Mode
#define PWM_0_CTL_DBRISEUPD_I 0x00000000 // Immediate
#define PWM_0_CTL_DBRISEUPD_LS 0x00002000 // Locally Synchronized
#define PWM_0_CTL_DBRISEUPD_GS 0x00003000 // Globally Synchronized
#define PWM_0_CTL_DBCTLUPD_M 0x00000C00 // PWMnDBCTL Update Mode
#define PWM_0_CTL_DBCTLUPD_I 0x00000000 // Immediate
#define PWM_0_CTL_DBCTLUPD_LS 0x00000800 // Locally Synchronized
#define PWM_0_CTL_DBCTLUPD_GS 0x00000C00 // Globally Synchronized
#define PWM_0_CTL_GENBUPD_M 0x00000300 // PWMnGENB Update Mode
#define PWM_0_CTL_GENBUPD_I 0x00000000 // Immediate
#define PWM_0_CTL_GENBUPD_LS 0x00000200 // Locally Synchronized
#define PWM_0_CTL_GENBUPD_GS 0x00000300 // Globally Synchronized
#define PWM_0_CTL_GENAUPD_M 0x000000C0 // PWMnGENA Update Mode
#define PWM_0_CTL_GENAUPD_I 0x00000000 // Immediate
#define PWM_0_CTL_GENAUPD_LS 0x00000080 // Locally Synchronized
#define PWM_0_CTL_GENAUPD_GS 0x000000C0 // Globally Synchronized
#define PWM_0_CTL_CMPBUPD 0x00000020 // Comparator B Update Mode
#define PWM_0_CTL_CMPAUPD 0x00000010 // Comparator A Update Mode
#define PWM_0_CTL_LOADUPD 0x00000008 // Load Register Update Mode
#define PWM_0_CTL_DEBUG 0x00000004 // Debug Mode
#define PWM_0_CTL_MODE 0x00000002 // Counter Mode
#define PWM_0_CTL_ENABLE 0x00000001 // PWM Block Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_0_INTEN register.
//
//*****************************************************************************
#define PWM_0_INTEN_TRCMPBD 0x00002000 // Trigger for Counter=PWMnCMPB
// Down
#define PWM_0_INTEN_TRCMPBU 0x00001000 // Trigger for Counter=PWMnCMPB Up
#define PWM_0_INTEN_TRCMPAD 0x00000800 // Trigger for Counter=PWMnCMPA
// Down
#define PWM_0_INTEN_TRCMPAU 0x00000400 // Trigger for Counter=PWMnCMPA Up
#define PWM_0_INTEN_TRCNTLOAD 0x00000200 // Trigger for Counter=PWMnLOAD
#define PWM_0_INTEN_TRCNTZERO 0x00000100 // Trigger for Counter=0
#define PWM_0_INTEN_INTCMPBD 0x00000020 // Interrupt for Counter=PWMnCMPB
// Down
#define PWM_0_INTEN_INTCMPBU 0x00000010 // Interrupt for Counter=PWMnCMPB
// Up
#define PWM_0_INTEN_INTCMPAD 0x00000008 // Interrupt for Counter=PWMnCMPA
// Down
#define PWM_0_INTEN_INTCMPAU 0x00000004 // Interrupt for Counter=PWMnCMPA
// Up
#define PWM_0_INTEN_INTCNTLOAD 0x00000002 // Interrupt for Counter=PWMnLOAD
#define PWM_0_INTEN_INTCNTZERO 0x00000001 // Interrupt for Counter=0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_0_RIS register.
//
//*****************************************************************************
#define PWM_0_RIS_INTCMPBD 0x00000020 // Comparator B Down Interrupt
// Status
#define PWM_0_RIS_INTCMPBU 0x00000010 // Comparator B Up Interrupt Status
#define PWM_0_RIS_INTCMPAD 0x00000008 // Comparator A Down Interrupt
// Status
#define PWM_0_RIS_INTCMPAU 0x00000004 // Comparator A Up Interrupt Status
#define PWM_0_RIS_INTCNTLOAD 0x00000002 // Counter=Load Interrupt Status
#define PWM_0_RIS_INTCNTZERO 0x00000001 // Counter=0 Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_0_ISC register.
//
//*****************************************************************************
#define PWM_0_ISC_INTCMPBD 0x00000020 // Comparator B Down Interrupt
#define PWM_0_ISC_INTCMPBU 0x00000010 // Comparator B Up Interrupt
#define PWM_0_ISC_INTCMPAD 0x00000008 // Comparator A Down Interrupt
#define PWM_0_ISC_INTCMPAU 0x00000004 // Comparator A Up Interrupt
#define PWM_0_ISC_INTCNTLOAD 0x00000002 // Counter=Load Interrupt
#define PWM_0_ISC_INTCNTZERO 0x00000001 // Counter=0 Interrupt
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_0_LOAD register.
//
//*****************************************************************************
#define PWM_0_LOAD_M 0x0000FFFF // Counter Load Value
#define PWM_0_LOAD_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_0_COUNT register.
//
//*****************************************************************************
#define PWM_0_COUNT_M 0x0000FFFF // Counter Value
#define PWM_0_COUNT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_0_CMPA register.
//
//*****************************************************************************
#define PWM_0_CMPA_M 0x0000FFFF // Comparator A Value
#define PWM_0_CMPA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_0_CMPB register.
//
//*****************************************************************************
#define PWM_0_CMPB_M 0x0000FFFF // Comparator B Value
#define PWM_0_CMPB_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_0_GENA register.
//
//*****************************************************************************
#define PWM_0_GENA_ACTCMPBD_M 0x00000C00 // Action for Comparator B Down
#define PWM_0_GENA_ACTCMPBD_NONE \
0x00000000 // Do nothing
#define PWM_0_GENA_ACTCMPBD_INV 0x00000400 // Invert pwmA
#define PWM_0_GENA_ACTCMPBD_ZERO \
0x00000800 // Drive pwmA Low
#define PWM_0_GENA_ACTCMPBD_ONE 0x00000C00 // Drive pwmA High
#define PWM_0_GENA_ACTCMPBU_M 0x00000300 // Action for Comparator B Up
#define PWM_0_GENA_ACTCMPBU_NONE \
0x00000000 // Do nothing
#define PWM_0_GENA_ACTCMPBU_INV 0x00000100 // Invert pwmA
#define PWM_0_GENA_ACTCMPBU_ZERO \
0x00000200 // Drive pwmA Low
#define PWM_0_GENA_ACTCMPBU_ONE 0x00000300 // Drive pwmA High
#define PWM_0_GENA_ACTCMPAD_M 0x000000C0 // Action for Comparator A Down
#define PWM_0_GENA_ACTCMPAD_NONE \
0x00000000 // Do nothing
#define PWM_0_GENA_ACTCMPAD_INV 0x00000040 // Invert pwmA
#define PWM_0_GENA_ACTCMPAD_ZERO \
0x00000080 // Drive pwmA Low
#define PWM_0_GENA_ACTCMPAD_ONE 0x000000C0 // Drive pwmA High
#define PWM_0_GENA_ACTCMPAU_M 0x00000030 // Action for Comparator A Up
#define PWM_0_GENA_ACTCMPAU_NONE \
0x00000000 // Do nothing
#define PWM_0_GENA_ACTCMPAU_INV 0x00000010 // Invert pwmA
#define PWM_0_GENA_ACTCMPAU_ZERO \
0x00000020 // Drive pwmA Low
#define PWM_0_GENA_ACTCMPAU_ONE 0x00000030 // Drive pwmA High
#define PWM_0_GENA_ACTLOAD_M 0x0000000C // Action for Counter=LOAD
#define PWM_0_GENA_ACTLOAD_NONE 0x00000000 // Do nothing
#define PWM_0_GENA_ACTLOAD_INV 0x00000004 // Invert pwmA
#define PWM_0_GENA_ACTLOAD_ZERO 0x00000008 // Drive pwmA Low
#define PWM_0_GENA_ACTLOAD_ONE 0x0000000C // Drive pwmA High
#define PWM_0_GENA_ACTZERO_M 0x00000003 // Action for Counter=0
#define PWM_0_GENA_ACTZERO_NONE 0x00000000 // Do nothing
#define PWM_0_GENA_ACTZERO_INV 0x00000001 // Invert pwmA
#define PWM_0_GENA_ACTZERO_ZERO 0x00000002 // Drive pwmA Low
#define PWM_0_GENA_ACTZERO_ONE 0x00000003 // Drive pwmA High
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_0_GENB register.
//
//*****************************************************************************
#define PWM_0_GENB_ACTCMPBD_M 0x00000C00 // Action for Comparator B Down
#define PWM_0_GENB_ACTCMPBD_NONE \
0x00000000 // Do nothing
#define PWM_0_GENB_ACTCMPBD_INV 0x00000400 // Invert pwmB
#define PWM_0_GENB_ACTCMPBD_ZERO \
0x00000800 // Drive pwmB Low
#define PWM_0_GENB_ACTCMPBD_ONE 0x00000C00 // Drive pwmB High
#define PWM_0_GENB_ACTCMPBU_M 0x00000300 // Action for Comparator B Up
#define PWM_0_GENB_ACTCMPBU_NONE \
0x00000000 // Do nothing
#define PWM_0_GENB_ACTCMPBU_INV 0x00000100 // Invert pwmB
#define PWM_0_GENB_ACTCMPBU_ZERO \
0x00000200 // Drive pwmB Low
#define PWM_0_GENB_ACTCMPBU_ONE 0x00000300 // Drive pwmB High
#define PWM_0_GENB_ACTCMPAD_M 0x000000C0 // Action for Comparator A Down
#define PWM_0_GENB_ACTCMPAD_NONE \
0x00000000 // Do nothing
#define PWM_0_GENB_ACTCMPAD_INV 0x00000040 // Invert pwmB
#define PWM_0_GENB_ACTCMPAD_ZERO \
0x00000080 // Drive pwmB Low
#define PWM_0_GENB_ACTCMPAD_ONE 0x000000C0 // Drive pwmB High
#define PWM_0_GENB_ACTCMPAU_M 0x00000030 // Action for Comparator A Up
#define PWM_0_GENB_ACTCMPAU_NONE \
0x00000000 // Do nothing
#define PWM_0_GENB_ACTCMPAU_INV 0x00000010 // Invert pwmB
#define PWM_0_GENB_ACTCMPAU_ZERO \
0x00000020 // Drive pwmB Low
#define PWM_0_GENB_ACTCMPAU_ONE 0x00000030 // Drive pwmB High
#define PWM_0_GENB_ACTLOAD_M 0x0000000C // Action for Counter=LOAD
#define PWM_0_GENB_ACTLOAD_NONE 0x00000000 // Do nothing
#define PWM_0_GENB_ACTLOAD_INV 0x00000004 // Invert pwmB
#define PWM_0_GENB_ACTLOAD_ZERO 0x00000008 // Drive pwmB Low
#define PWM_0_GENB_ACTLOAD_ONE 0x0000000C // Drive pwmB High
#define PWM_0_GENB_ACTZERO_M 0x00000003 // Action for Counter=0
#define PWM_0_GENB_ACTZERO_NONE 0x00000000 // Do nothing
#define PWM_0_GENB_ACTZERO_INV 0x00000001 // Invert pwmB
#define PWM_0_GENB_ACTZERO_ZERO 0x00000002 // Drive pwmB Low
#define PWM_0_GENB_ACTZERO_ONE 0x00000003 // Drive pwmB High
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_0_DBCTL register.
//
//*****************************************************************************
#define PWM_0_DBCTL_ENABLE 0x00000001 // Dead-Band Generator Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_0_DBRISE register.
//
//*****************************************************************************
#define PWM_0_DBRISE_DELAY_M 0x00000FFF // Dead-Band Rise Delay
#define PWM_0_DBRISE_DELAY_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_0_DBFALL register.
//
//*****************************************************************************
#define PWM_0_DBFALL_DELAY_M 0x00000FFF // Dead-Band Fall Delay
#define PWM_0_DBFALL_DELAY_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_0_FLTSRC0
// register.
//
//*****************************************************************************
#define PWM_0_FLTSRC0_FAULT3 0x00000008 // Fault3 Input
#define PWM_0_FLTSRC0_FAULT2 0x00000004 // Fault2 Input
#define PWM_0_FLTSRC0_FAULT1 0x00000002 // Fault1 Input
#define PWM_0_FLTSRC0_FAULT0 0x00000001 // Fault0 Input
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_0_FLTSRC1
// register.
//
//*****************************************************************************
#define PWM_0_FLTSRC1_DCMP7 0x00000080 // Digital Comparator 7
#define PWM_0_FLTSRC1_DCMP6 0x00000040 // Digital Comparator 6
#define PWM_0_FLTSRC1_DCMP5 0x00000020 // Digital Comparator 5
#define PWM_0_FLTSRC1_DCMP4 0x00000010 // Digital Comparator 4
#define PWM_0_FLTSRC1_DCMP3 0x00000008 // Digital Comparator 3
#define PWM_0_FLTSRC1_DCMP2 0x00000004 // Digital Comparator 2
#define PWM_0_FLTSRC1_DCMP1 0x00000002 // Digital Comparator 1
#define PWM_0_FLTSRC1_DCMP0 0x00000001 // Digital Comparator 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_0_MINFLTPER
// register.
//
//*****************************************************************************
#define PWM_0_MINFLTPER_M 0x0000FFFF // Minimum Fault Period
#define PWM_0_MINFLTPER_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_1_CTL register.
//
//*****************************************************************************
#define PWM_1_CTL_LATCH 0x00040000 // Latch Fault Input
#define PWM_1_CTL_MINFLTPER 0x00020000 // Minimum Fault Period
#define PWM_1_CTL_FLTSRC 0x00010000 // Fault Condition Source
#define PWM_1_CTL_DBFALLUPD_M 0x0000C000 // PWMnDBFALL Update Mode
#define PWM_1_CTL_DBFALLUPD_I 0x00000000 // Immediate
#define PWM_1_CTL_DBFALLUPD_LS 0x00008000 // Locally Synchronized
#define PWM_1_CTL_DBFALLUPD_GS 0x0000C000 // Globally Synchronized
#define PWM_1_CTL_DBRISEUPD_M 0x00003000 // PWMnDBRISE Update Mode
#define PWM_1_CTL_DBRISEUPD_I 0x00000000 // Immediate
#define PWM_1_CTL_DBRISEUPD_LS 0x00002000 // Locally Synchronized
#define PWM_1_CTL_DBRISEUPD_GS 0x00003000 // Globally Synchronized
#define PWM_1_CTL_DBCTLUPD_M 0x00000C00 // PWMnDBCTL Update Mode
#define PWM_1_CTL_DBCTLUPD_I 0x00000000 // Immediate
#define PWM_1_CTL_DBCTLUPD_LS 0x00000800 // Locally Synchronized
#define PWM_1_CTL_DBCTLUPD_GS 0x00000C00 // Globally Synchronized
#define PWM_1_CTL_GENBUPD_M 0x00000300 // PWMnGENB Update Mode
#define PWM_1_CTL_GENBUPD_I 0x00000000 // Immediate
#define PWM_1_CTL_GENBUPD_LS 0x00000200 // Locally Synchronized
#define PWM_1_CTL_GENBUPD_GS 0x00000300 // Globally Synchronized
#define PWM_1_CTL_GENAUPD_M 0x000000C0 // PWMnGENA Update Mode
#define PWM_1_CTL_GENAUPD_I 0x00000000 // Immediate
#define PWM_1_CTL_GENAUPD_LS 0x00000080 // Locally Synchronized
#define PWM_1_CTL_GENAUPD_GS 0x000000C0 // Globally Synchronized
#define PWM_1_CTL_CMPBUPD 0x00000020 // Comparator B Update Mode
#define PWM_1_CTL_CMPAUPD 0x00000010 // Comparator A Update Mode
#define PWM_1_CTL_LOADUPD 0x00000008 // Load Register Update Mode
#define PWM_1_CTL_DEBUG 0x00000004 // Debug Mode
#define PWM_1_CTL_MODE 0x00000002 // Counter Mode
#define PWM_1_CTL_ENABLE 0x00000001 // PWM Block Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_1_INTEN register.
//
//*****************************************************************************
#define PWM_1_INTEN_TRCMPBD 0x00002000 // Trigger for Counter=PWMnCMPB
// Down
#define PWM_1_INTEN_TRCMPBU 0x00001000 // Trigger for Counter=PWMnCMPB Up
#define PWM_1_INTEN_TRCMPAD 0x00000800 // Trigger for Counter=PWMnCMPA
// Down
#define PWM_1_INTEN_TRCMPAU 0x00000400 // Trigger for Counter=PWMnCMPA Up
#define PWM_1_INTEN_TRCNTLOAD 0x00000200 // Trigger for Counter=PWMnLOAD
#define PWM_1_INTEN_TRCNTZERO 0x00000100 // Trigger for Counter=0
#define PWM_1_INTEN_INTCMPBD 0x00000020 // Interrupt for Counter=PWMnCMPB
// Down
#define PWM_1_INTEN_INTCMPBU 0x00000010 // Interrupt for Counter=PWMnCMPB
// Up
#define PWM_1_INTEN_INTCMPAD 0x00000008 // Interrupt for Counter=PWMnCMPA
// Down
#define PWM_1_INTEN_INTCMPAU 0x00000004 // Interrupt for Counter=PWMnCMPA
// Up
#define PWM_1_INTEN_INTCNTLOAD 0x00000002 // Interrupt for Counter=PWMnLOAD
#define PWM_1_INTEN_INTCNTZERO 0x00000001 // Interrupt for Counter=0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_1_RIS register.
//
//*****************************************************************************
#define PWM_1_RIS_INTCMPBD 0x00000020 // Comparator B Down Interrupt
// Status
#define PWM_1_RIS_INTCMPBU 0x00000010 // Comparator B Up Interrupt Status
#define PWM_1_RIS_INTCMPAD 0x00000008 // Comparator A Down Interrupt
// Status
#define PWM_1_RIS_INTCMPAU 0x00000004 // Comparator A Up Interrupt Status
#define PWM_1_RIS_INTCNTLOAD 0x00000002 // Counter=Load Interrupt Status
#define PWM_1_RIS_INTCNTZERO 0x00000001 // Counter=0 Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_1_ISC register.
//
//*****************************************************************************
#define PWM_1_ISC_INTCMPBD 0x00000020 // Comparator B Down Interrupt
#define PWM_1_ISC_INTCMPBU 0x00000010 // Comparator B Up Interrupt
#define PWM_1_ISC_INTCMPAD 0x00000008 // Comparator A Down Interrupt
#define PWM_1_ISC_INTCMPAU 0x00000004 // Comparator A Up Interrupt
#define PWM_1_ISC_INTCNTLOAD 0x00000002 // Counter=Load Interrupt
#define PWM_1_ISC_INTCNTZERO 0x00000001 // Counter=0 Interrupt
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_1_LOAD register.
//
//*****************************************************************************
#define PWM_1_LOAD_LOAD_M 0x0000FFFF // Counter Load Value
#define PWM_1_LOAD_LOAD_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_1_COUNT register.
//
//*****************************************************************************
#define PWM_1_COUNT_COUNT_M 0x0000FFFF // Counter Value
#define PWM_1_COUNT_COUNT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_1_CMPA register.
//
//*****************************************************************************
#define PWM_1_CMPA_COMPA_M 0x0000FFFF // Comparator A Value
#define PWM_1_CMPA_COMPA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_1_CMPB register.
//
//*****************************************************************************
#define PWM_1_CMPB_COMPB_M 0x0000FFFF // Comparator B Value
#define PWM_1_CMPB_COMPB_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_1_GENA register.
//
//*****************************************************************************
#define PWM_1_GENA_ACTCMPBD_M 0x00000C00 // Action for Comparator B Down
#define PWM_1_GENA_ACTCMPBD_NONE \
0x00000000 // Do nothing
#define PWM_1_GENA_ACTCMPBD_INV 0x00000400 // Invert pwmA
#define PWM_1_GENA_ACTCMPBD_ZERO \
0x00000800 // Drive pwmA Low
#define PWM_1_GENA_ACTCMPBD_ONE 0x00000C00 // Drive pwmA High
#define PWM_1_GENA_ACTCMPBU_M 0x00000300 // Action for Comparator B Up
#define PWM_1_GENA_ACTCMPBU_NONE \
0x00000000 // Do nothing
#define PWM_1_GENA_ACTCMPBU_INV 0x00000100 // Invert pwmA
#define PWM_1_GENA_ACTCMPBU_ZERO \
0x00000200 // Drive pwmA Low
#define PWM_1_GENA_ACTCMPBU_ONE 0x00000300 // Drive pwmA High
#define PWM_1_GENA_ACTCMPAD_M 0x000000C0 // Action for Comparator A Down
#define PWM_1_GENA_ACTCMPAD_NONE \
0x00000000 // Do nothing
#define PWM_1_GENA_ACTCMPAD_INV 0x00000040 // Invert pwmA
#define PWM_1_GENA_ACTCMPAD_ZERO \
0x00000080 // Drive pwmA Low
#define PWM_1_GENA_ACTCMPAD_ONE 0x000000C0 // Drive pwmA High
#define PWM_1_GENA_ACTCMPAU_M 0x00000030 // Action for Comparator A Up
#define PWM_1_GENA_ACTCMPAU_NONE \
0x00000000 // Do nothing
#define PWM_1_GENA_ACTCMPAU_INV 0x00000010 // Invert pwmA
#define PWM_1_GENA_ACTCMPAU_ZERO \
0x00000020 // Drive pwmA Low
#define PWM_1_GENA_ACTCMPAU_ONE 0x00000030 // Drive pwmA High
#define PWM_1_GENA_ACTLOAD_M 0x0000000C // Action for Counter=LOAD
#define PWM_1_GENA_ACTLOAD_NONE 0x00000000 // Do nothing
#define PWM_1_GENA_ACTLOAD_INV 0x00000004 // Invert pwmA
#define PWM_1_GENA_ACTLOAD_ZERO 0x00000008 // Drive pwmA Low
#define PWM_1_GENA_ACTLOAD_ONE 0x0000000C // Drive pwmA High
#define PWM_1_GENA_ACTZERO_M 0x00000003 // Action for Counter=0
#define PWM_1_GENA_ACTZERO_NONE 0x00000000 // Do nothing
#define PWM_1_GENA_ACTZERO_INV 0x00000001 // Invert pwmA
#define PWM_1_GENA_ACTZERO_ZERO 0x00000002 // Drive pwmA Low
#define PWM_1_GENA_ACTZERO_ONE 0x00000003 // Drive pwmA High
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_1_GENB register.
//
//*****************************************************************************
#define PWM_1_GENB_ACTCMPBD_M 0x00000C00 // Action for Comparator B Down
#define PWM_1_GENB_ACTCMPBD_NONE \
0x00000000 // Do nothing
#define PWM_1_GENB_ACTCMPBD_INV 0x00000400 // Invert pwmB
#define PWM_1_GENB_ACTCMPBD_ZERO \
0x00000800 // Drive pwmB Low
#define PWM_1_GENB_ACTCMPBD_ONE 0x00000C00 // Drive pwmB High
#define PWM_1_GENB_ACTCMPBU_M 0x00000300 // Action for Comparator B Up
#define PWM_1_GENB_ACTCMPBU_NONE \
0x00000000 // Do nothing
#define PWM_1_GENB_ACTCMPBU_INV 0x00000100 // Invert pwmB
#define PWM_1_GENB_ACTCMPBU_ZERO \
0x00000200 // Drive pwmB Low
#define PWM_1_GENB_ACTCMPBU_ONE 0x00000300 // Drive pwmB High
#define PWM_1_GENB_ACTCMPAD_M 0x000000C0 // Action for Comparator A Down
#define PWM_1_GENB_ACTCMPAD_NONE \
0x00000000 // Do nothing
#define PWM_1_GENB_ACTCMPAD_INV 0x00000040 // Invert pwmB
#define PWM_1_GENB_ACTCMPAD_ZERO \
0x00000080 // Drive pwmB Low
#define PWM_1_GENB_ACTCMPAD_ONE 0x000000C0 // Drive pwmB High
#define PWM_1_GENB_ACTCMPAU_M 0x00000030 // Action for Comparator A Up
#define PWM_1_GENB_ACTCMPAU_NONE \
0x00000000 // Do nothing
#define PWM_1_GENB_ACTCMPAU_INV 0x00000010 // Invert pwmB
#define PWM_1_GENB_ACTCMPAU_ZERO \
0x00000020 // Drive pwmB Low
#define PWM_1_GENB_ACTCMPAU_ONE 0x00000030 // Drive pwmB High
#define PWM_1_GENB_ACTLOAD_M 0x0000000C // Action for Counter=LOAD
#define PWM_1_GENB_ACTLOAD_NONE 0x00000000 // Do nothing
#define PWM_1_GENB_ACTLOAD_INV 0x00000004 // Invert pwmB
#define PWM_1_GENB_ACTLOAD_ZERO 0x00000008 // Drive pwmB Low
#define PWM_1_GENB_ACTLOAD_ONE 0x0000000C // Drive pwmB High
#define PWM_1_GENB_ACTZERO_M 0x00000003 // Action for Counter=0
#define PWM_1_GENB_ACTZERO_NONE 0x00000000 // Do nothing
#define PWM_1_GENB_ACTZERO_INV 0x00000001 // Invert pwmB
#define PWM_1_GENB_ACTZERO_ZERO 0x00000002 // Drive pwmB Low
#define PWM_1_GENB_ACTZERO_ONE 0x00000003 // Drive pwmB High
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_1_DBCTL register.
//
//*****************************************************************************
#define PWM_1_DBCTL_ENABLE 0x00000001 // Dead-Band Generator Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_1_DBRISE register.
//
//*****************************************************************************
#define PWM_1_DBRISE_RISEDELAY_M \
0x00000FFF // Dead-Band Rise Delay
#define PWM_1_DBRISE_RISEDELAY_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_1_DBFALL register.
//
//*****************************************************************************
#define PWM_1_DBFALL_FALLDELAY_M \
0x00000FFF // Dead-Band Fall Delay
#define PWM_1_DBFALL_FALLDELAY_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_1_FLTSRC0
// register.
//
//*****************************************************************************
#define PWM_1_FLTSRC0_FAULT3 0x00000008 // Fault3 Input
#define PWM_1_FLTSRC0_FAULT2 0x00000004 // Fault2 Input
#define PWM_1_FLTSRC0_FAULT1 0x00000002 // Fault1 Input
#define PWM_1_FLTSRC0_FAULT0 0x00000001 // Fault0 Input
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_1_FLTSRC1
// register.
//
//*****************************************************************************
#define PWM_1_FLTSRC1_DCMP7 0x00000080 // Digital Comparator 7
#define PWM_1_FLTSRC1_DCMP6 0x00000040 // Digital Comparator 6
#define PWM_1_FLTSRC1_DCMP5 0x00000020 // Digital Comparator 5
#define PWM_1_FLTSRC1_DCMP4 0x00000010 // Digital Comparator 4
#define PWM_1_FLTSRC1_DCMP3 0x00000008 // Digital Comparator 3
#define PWM_1_FLTSRC1_DCMP2 0x00000004 // Digital Comparator 2
#define PWM_1_FLTSRC1_DCMP1 0x00000002 // Digital Comparator 1
#define PWM_1_FLTSRC1_DCMP0 0x00000001 // Digital Comparator 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_1_MINFLTPER
// register.
//
//*****************************************************************************
#define PWM_1_MINFLTPER_MFP_M 0x0000FFFF // Minimum Fault Period
#define PWM_1_MINFLTPER_MFP_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_2_CTL register.
//
//*****************************************************************************
#define PWM_2_CTL_LATCH 0x00040000 // Latch Fault Input
#define PWM_2_CTL_MINFLTPER 0x00020000 // Minimum Fault Period
#define PWM_2_CTL_FLTSRC 0x00010000 // Fault Condition Source
#define PWM_2_CTL_DBFALLUPD_M 0x0000C000 // PWMnDBFALL Update Mode
#define PWM_2_CTL_DBFALLUPD_I 0x00000000 // Immediate
#define PWM_2_CTL_DBFALLUPD_LS 0x00008000 // Locally Synchronized
#define PWM_2_CTL_DBFALLUPD_GS 0x0000C000 // Globally Synchronized
#define PWM_2_CTL_DBRISEUPD_M 0x00003000 // PWMnDBRISE Update Mode
#define PWM_2_CTL_DBRISEUPD_I 0x00000000 // Immediate
#define PWM_2_CTL_DBRISEUPD_LS 0x00002000 // Locally Synchronized
#define PWM_2_CTL_DBRISEUPD_GS 0x00003000 // Globally Synchronized
#define PWM_2_CTL_DBCTLUPD_M 0x00000C00 // PWMnDBCTL Update Mode
#define PWM_2_CTL_DBCTLUPD_I 0x00000000 // Immediate
#define PWM_2_CTL_DBCTLUPD_LS 0x00000800 // Locally Synchronized
#define PWM_2_CTL_DBCTLUPD_GS 0x00000C00 // Globally Synchronized
#define PWM_2_CTL_GENBUPD_M 0x00000300 // PWMnGENB Update Mode
#define PWM_2_CTL_GENBUPD_I 0x00000000 // Immediate
#define PWM_2_CTL_GENBUPD_LS 0x00000200 // Locally Synchronized
#define PWM_2_CTL_GENBUPD_GS 0x00000300 // Globally Synchronized
#define PWM_2_CTL_GENAUPD_M 0x000000C0 // PWMnGENA Update Mode
#define PWM_2_CTL_GENAUPD_I 0x00000000 // Immediate
#define PWM_2_CTL_GENAUPD_LS 0x00000080 // Locally Synchronized
#define PWM_2_CTL_GENAUPD_GS 0x000000C0 // Globally Synchronized
#define PWM_2_CTL_CMPBUPD 0x00000020 // Comparator B Update Mode
#define PWM_2_CTL_CMPAUPD 0x00000010 // Comparator A Update Mode
#define PWM_2_CTL_LOADUPD 0x00000008 // Load Register Update Mode
#define PWM_2_CTL_DEBUG 0x00000004 // Debug Mode
#define PWM_2_CTL_MODE 0x00000002 // Counter Mode
#define PWM_2_CTL_ENABLE 0x00000001 // PWM Block Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_2_INTEN register.
//
//*****************************************************************************
#define PWM_2_INTEN_TRCMPBD 0x00002000 // Trigger for Counter=PWMnCMPB
// Down
#define PWM_2_INTEN_TRCMPBU 0x00001000 // Trigger for Counter=PWMnCMPB Up
#define PWM_2_INTEN_TRCMPAD 0x00000800 // Trigger for Counter=PWMnCMPA
// Down
#define PWM_2_INTEN_TRCMPAU 0x00000400 // Trigger for Counter=PWMnCMPA Up
#define PWM_2_INTEN_TRCNTLOAD 0x00000200 // Trigger for Counter=PWMnLOAD
#define PWM_2_INTEN_TRCNTZERO 0x00000100 // Trigger for Counter=0
#define PWM_2_INTEN_INTCMPBD 0x00000020 // Interrupt for Counter=PWMnCMPB
// Down
#define PWM_2_INTEN_INTCMPBU 0x00000010 // Interrupt for Counter=PWMnCMPB
// Up
#define PWM_2_INTEN_INTCMPAD 0x00000008 // Interrupt for Counter=PWMnCMPA
// Down
#define PWM_2_INTEN_INTCMPAU 0x00000004 // Interrupt for Counter=PWMnCMPA
// Up
#define PWM_2_INTEN_INTCNTLOAD 0x00000002 // Interrupt for Counter=PWMnLOAD
#define PWM_2_INTEN_INTCNTZERO 0x00000001 // Interrupt for Counter=0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_2_RIS register.
//
//*****************************************************************************
#define PWM_2_RIS_INTCMPBD 0x00000020 // Comparator B Down Interrupt
// Status
#define PWM_2_RIS_INTCMPBU 0x00000010 // Comparator B Up Interrupt Status
#define PWM_2_RIS_INTCMPAD 0x00000008 // Comparator A Down Interrupt
// Status
#define PWM_2_RIS_INTCMPAU 0x00000004 // Comparator A Up Interrupt Status
#define PWM_2_RIS_INTCNTLOAD 0x00000002 // Counter=Load Interrupt Status
#define PWM_2_RIS_INTCNTZERO 0x00000001 // Counter=0 Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_2_ISC register.
//
//*****************************************************************************
#define PWM_2_ISC_INTCMPBD 0x00000020 // Comparator B Down Interrupt
#define PWM_2_ISC_INTCMPBU 0x00000010 // Comparator B Up Interrupt
#define PWM_2_ISC_INTCMPAD 0x00000008 // Comparator A Down Interrupt
#define PWM_2_ISC_INTCMPAU 0x00000004 // Comparator A Up Interrupt
#define PWM_2_ISC_INTCNTLOAD 0x00000002 // Counter=Load Interrupt
#define PWM_2_ISC_INTCNTZERO 0x00000001 // Counter=0 Interrupt
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_2_LOAD register.
//
//*****************************************************************************
#define PWM_2_LOAD_LOAD_M 0x0000FFFF // Counter Load Value
#define PWM_2_LOAD_LOAD_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_2_COUNT register.
//
//*****************************************************************************
#define PWM_2_COUNT_COUNT_M 0x0000FFFF // Counter Value
#define PWM_2_COUNT_COUNT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_2_CMPA register.
//
//*****************************************************************************
#define PWM_2_CMPA_COMPA_M 0x0000FFFF // Comparator A Value
#define PWM_2_CMPA_COMPA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_2_CMPB register.
//
//*****************************************************************************
#define PWM_2_CMPB_COMPB_M 0x0000FFFF // Comparator B Value
#define PWM_2_CMPB_COMPB_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_2_GENA register.
//
//*****************************************************************************
#define PWM_2_GENA_ACTCMPBD_M 0x00000C00 // Action for Comparator B Down
#define PWM_2_GENA_ACTCMPBD_NONE \
0x00000000 // Do nothing
#define PWM_2_GENA_ACTCMPBD_INV 0x00000400 // Invert pwmA
#define PWM_2_GENA_ACTCMPBD_ZERO \
0x00000800 // Drive pwmA Low
#define PWM_2_GENA_ACTCMPBD_ONE 0x00000C00 // Drive pwmA High
#define PWM_2_GENA_ACTCMPBU_M 0x00000300 // Action for Comparator B Up
#define PWM_2_GENA_ACTCMPBU_NONE \
0x00000000 // Do nothing
#define PWM_2_GENA_ACTCMPBU_INV 0x00000100 // Invert pwmA
#define PWM_2_GENA_ACTCMPBU_ZERO \
0x00000200 // Drive pwmA Low
#define PWM_2_GENA_ACTCMPBU_ONE 0x00000300 // Drive pwmA High
#define PWM_2_GENA_ACTCMPAD_M 0x000000C0 // Action for Comparator A Down
#define PWM_2_GENA_ACTCMPAD_NONE \
0x00000000 // Do nothing
#define PWM_2_GENA_ACTCMPAD_INV 0x00000040 // Invert pwmA
#define PWM_2_GENA_ACTCMPAD_ZERO \
0x00000080 // Drive pwmA Low
#define PWM_2_GENA_ACTCMPAD_ONE 0x000000C0 // Drive pwmA High
#define PWM_2_GENA_ACTCMPAU_M 0x00000030 // Action for Comparator A Up
#define PWM_2_GENA_ACTCMPAU_NONE \
0x00000000 // Do nothing
#define PWM_2_GENA_ACTCMPAU_INV 0x00000010 // Invert pwmA
#define PWM_2_GENA_ACTCMPAU_ZERO \
0x00000020 // Drive pwmA Low
#define PWM_2_GENA_ACTCMPAU_ONE 0x00000030 // Drive pwmA High
#define PWM_2_GENA_ACTLOAD_M 0x0000000C // Action for Counter=LOAD
#define PWM_2_GENA_ACTLOAD_NONE 0x00000000 // Do nothing
#define PWM_2_GENA_ACTLOAD_INV 0x00000004 // Invert pwmA
#define PWM_2_GENA_ACTLOAD_ZERO 0x00000008 // Drive pwmA Low
#define PWM_2_GENA_ACTLOAD_ONE 0x0000000C // Drive pwmA High
#define PWM_2_GENA_ACTZERO_M 0x00000003 // Action for Counter=0
#define PWM_2_GENA_ACTZERO_NONE 0x00000000 // Do nothing
#define PWM_2_GENA_ACTZERO_INV 0x00000001 // Invert pwmA
#define PWM_2_GENA_ACTZERO_ZERO 0x00000002 // Drive pwmA Low
#define PWM_2_GENA_ACTZERO_ONE 0x00000003 // Drive pwmA High
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_2_GENB register.
//
//*****************************************************************************
#define PWM_2_GENB_ACTCMPBD_M 0x00000C00 // Action for Comparator B Down
#define PWM_2_GENB_ACTCMPBD_NONE \
0x00000000 // Do nothing
#define PWM_2_GENB_ACTCMPBD_INV 0x00000400 // Invert pwmB
#define PWM_2_GENB_ACTCMPBD_ZERO \
0x00000800 // Drive pwmB Low
#define PWM_2_GENB_ACTCMPBD_ONE 0x00000C00 // Drive pwmB High
#define PWM_2_GENB_ACTCMPBU_M 0x00000300 // Action for Comparator B Up
#define PWM_2_GENB_ACTCMPBU_NONE \
0x00000000 // Do nothing
#define PWM_2_GENB_ACTCMPBU_INV 0x00000100 // Invert pwmB
#define PWM_2_GENB_ACTCMPBU_ZERO \
0x00000200 // Drive pwmB Low
#define PWM_2_GENB_ACTCMPBU_ONE 0x00000300 // Drive pwmB High
#define PWM_2_GENB_ACTCMPAD_M 0x000000C0 // Action for Comparator A Down
#define PWM_2_GENB_ACTCMPAD_NONE \
0x00000000 // Do nothing
#define PWM_2_GENB_ACTCMPAD_INV 0x00000040 // Invert pwmB
#define PWM_2_GENB_ACTCMPAD_ZERO \
0x00000080 // Drive pwmB Low
#define PWM_2_GENB_ACTCMPAD_ONE 0x000000C0 // Drive pwmB High
#define PWM_2_GENB_ACTCMPAU_M 0x00000030 // Action for Comparator A Up
#define PWM_2_GENB_ACTCMPAU_NONE \
0x00000000 // Do nothing
#define PWM_2_GENB_ACTCMPAU_INV 0x00000010 // Invert pwmB
#define PWM_2_GENB_ACTCMPAU_ZERO \
0x00000020 // Drive pwmB Low
#define PWM_2_GENB_ACTCMPAU_ONE 0x00000030 // Drive pwmB High
#define PWM_2_GENB_ACTLOAD_M 0x0000000C // Action for Counter=LOAD
#define PWM_2_GENB_ACTLOAD_NONE 0x00000000 // Do nothing
#define PWM_2_GENB_ACTLOAD_INV 0x00000004 // Invert pwmB
#define PWM_2_GENB_ACTLOAD_ZERO 0x00000008 // Drive pwmB Low
#define PWM_2_GENB_ACTLOAD_ONE 0x0000000C // Drive pwmB High
#define PWM_2_GENB_ACTZERO_M 0x00000003 // Action for Counter=0
#define PWM_2_GENB_ACTZERO_NONE 0x00000000 // Do nothing
#define PWM_2_GENB_ACTZERO_INV 0x00000001 // Invert pwmB
#define PWM_2_GENB_ACTZERO_ZERO 0x00000002 // Drive pwmB Low
#define PWM_2_GENB_ACTZERO_ONE 0x00000003 // Drive pwmB High
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_2_DBCTL register.
//
//*****************************************************************************
#define PWM_2_DBCTL_ENABLE 0x00000001 // Dead-Band Generator Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_2_DBRISE register.
//
//*****************************************************************************
#define PWM_2_DBRISE_RISEDELAY_M \
0x00000FFF // Dead-Band Rise Delay
#define PWM_2_DBRISE_RISEDELAY_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_2_DBFALL register.
//
//*****************************************************************************
#define PWM_2_DBFALL_FALLDELAY_M \
0x00000FFF // Dead-Band Fall Delay
#define PWM_2_DBFALL_FALLDELAY_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_2_FLTSRC0
// register.
//
//*****************************************************************************
#define PWM_2_FLTSRC0_FAULT3 0x00000008 // Fault3 Input
#define PWM_2_FLTSRC0_FAULT2 0x00000004 // Fault2 Input
#define PWM_2_FLTSRC0_FAULT1 0x00000002 // Fault1 Input
#define PWM_2_FLTSRC0_FAULT0 0x00000001 // Fault0 Input
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_2_FLTSRC1
// register.
//
//*****************************************************************************
#define PWM_2_FLTSRC1_DCMP7 0x00000080 // Digital Comparator 7
#define PWM_2_FLTSRC1_DCMP6 0x00000040 // Digital Comparator 6
#define PWM_2_FLTSRC1_DCMP5 0x00000020 // Digital Comparator 5
#define PWM_2_FLTSRC1_DCMP4 0x00000010 // Digital Comparator 4
#define PWM_2_FLTSRC1_DCMP3 0x00000008 // Digital Comparator 3
#define PWM_2_FLTSRC1_DCMP2 0x00000004 // Digital Comparator 2
#define PWM_2_FLTSRC1_DCMP1 0x00000002 // Digital Comparator 1
#define PWM_2_FLTSRC1_DCMP0 0x00000001 // Digital Comparator 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_2_MINFLTPER
// register.
//
//*****************************************************************************
#define PWM_2_MINFLTPER_MFP_M 0x0000FFFF // Minimum Fault Period
#define PWM_2_MINFLTPER_MFP_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_3_CTL register.
//
//*****************************************************************************
#define PWM_3_CTL_LATCH 0x00040000 // Latch Fault Input
#define PWM_3_CTL_MINFLTPER 0x00020000 // Minimum Fault Period
#define PWM_3_CTL_FLTSRC 0x00010000 // Fault Condition Source
#define PWM_3_CTL_DBFALLUPD_M 0x0000C000 // PWMnDBFALL Update Mode
#define PWM_3_CTL_DBFALLUPD_I 0x00000000 // Immediate
#define PWM_3_CTL_DBFALLUPD_LS 0x00008000 // Locally Synchronized
#define PWM_3_CTL_DBFALLUPD_GS 0x0000C000 // Globally Synchronized
#define PWM_3_CTL_DBRISEUPD_M 0x00003000 // PWMnDBRISE Update Mode
#define PWM_3_CTL_DBRISEUPD_I 0x00000000 // Immediate
#define PWM_3_CTL_DBRISEUPD_LS 0x00002000 // Locally Synchronized
#define PWM_3_CTL_DBRISEUPD_GS 0x00003000 // Globally Synchronized
#define PWM_3_CTL_DBCTLUPD_M 0x00000C00 // PWMnDBCTL Update Mode
#define PWM_3_CTL_DBCTLUPD_I 0x00000000 // Immediate
#define PWM_3_CTL_DBCTLUPD_LS 0x00000800 // Locally Synchronized
#define PWM_3_CTL_DBCTLUPD_GS 0x00000C00 // Globally Synchronized
#define PWM_3_CTL_GENBUPD_M 0x00000300 // PWMnGENB Update Mode
#define PWM_3_CTL_GENBUPD_I 0x00000000 // Immediate
#define PWM_3_CTL_GENBUPD_LS 0x00000200 // Locally Synchronized
#define PWM_3_CTL_GENBUPD_GS 0x00000300 // Globally Synchronized
#define PWM_3_CTL_GENAUPD_M 0x000000C0 // PWMnGENA Update Mode
#define PWM_3_CTL_GENAUPD_I 0x00000000 // Immediate
#define PWM_3_CTL_GENAUPD_LS 0x00000080 // Locally Synchronized
#define PWM_3_CTL_GENAUPD_GS 0x000000C0 // Globally Synchronized
#define PWM_3_CTL_CMPBUPD 0x00000020 // Comparator B Update Mode
#define PWM_3_CTL_CMPAUPD 0x00000010 // Comparator A Update Mode
#define PWM_3_CTL_LOADUPD 0x00000008 // Load Register Update Mode
#define PWM_3_CTL_DEBUG 0x00000004 // Debug Mode
#define PWM_3_CTL_MODE 0x00000002 // Counter Mode
#define PWM_3_CTL_ENABLE 0x00000001 // PWM Block Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_3_INTEN register.
//
//*****************************************************************************
#define PWM_3_INTEN_TRCMPBD 0x00002000 // Trigger for Counter=PWMnCMPB
// Down
#define PWM_3_INTEN_TRCMPBU 0x00001000 // Trigger for Counter=PWMnCMPB Up
#define PWM_3_INTEN_TRCMPAD 0x00000800 // Trigger for Counter=PWMnCMPA
// Down
#define PWM_3_INTEN_TRCMPAU 0x00000400 // Trigger for Counter=PWMnCMPA Up
#define PWM_3_INTEN_TRCNTLOAD 0x00000200 // Trigger for Counter=PWMnLOAD
#define PWM_3_INTEN_TRCNTZERO 0x00000100 // Trigger for Counter=0
#define PWM_3_INTEN_INTCMPBD 0x00000020 // Interrupt for Counter=PWMnCMPB
// Down
#define PWM_3_INTEN_INTCMPBU 0x00000010 // Interrupt for Counter=PWMnCMPB
// Up
#define PWM_3_INTEN_INTCMPAD 0x00000008 // Interrupt for Counter=PWMnCMPA
// Down
#define PWM_3_INTEN_INTCMPAU 0x00000004 // Interrupt for Counter=PWMnCMPA
// Up
#define PWM_3_INTEN_INTCNTLOAD 0x00000002 // Interrupt for Counter=PWMnLOAD
#define PWM_3_INTEN_INTCNTZERO 0x00000001 // Interrupt for Counter=0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_3_RIS register.
//
//*****************************************************************************
#define PWM_3_RIS_INTCMPBD 0x00000020 // Comparator B Down Interrupt
// Status
#define PWM_3_RIS_INTCMPBU 0x00000010 // Comparator B Up Interrupt Status
#define PWM_3_RIS_INTCMPAD 0x00000008 // Comparator A Down Interrupt
// Status
#define PWM_3_RIS_INTCMPAU 0x00000004 // Comparator A Up Interrupt Status
#define PWM_3_RIS_INTCNTLOAD 0x00000002 // Counter=Load Interrupt Status
#define PWM_3_RIS_INTCNTZERO 0x00000001 // Counter=0 Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_3_ISC register.
//
//*****************************************************************************
#define PWM_3_ISC_INTCMPBD 0x00000020 // Comparator B Down Interrupt
#define PWM_3_ISC_INTCMPBU 0x00000010 // Comparator B Up Interrupt
#define PWM_3_ISC_INTCMPAD 0x00000008 // Comparator A Down Interrupt
#define PWM_3_ISC_INTCMPAU 0x00000004 // Comparator A Up Interrupt
#define PWM_3_ISC_INTCNTLOAD 0x00000002 // Counter=Load Interrupt
#define PWM_3_ISC_INTCNTZERO 0x00000001 // Counter=0 Interrupt
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_3_LOAD register.
//
//*****************************************************************************
#define PWM_3_LOAD_LOAD_M 0x0000FFFF // Counter Load Value
#define PWM_3_LOAD_LOAD_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_3_COUNT register.
//
//*****************************************************************************
#define PWM_3_COUNT_COUNT_M 0x0000FFFF // Counter Value
#define PWM_3_COUNT_COUNT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_3_CMPA register.
//
//*****************************************************************************
#define PWM_3_CMPA_COMPA_M 0x0000FFFF // Comparator A Value
#define PWM_3_CMPA_COMPA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_3_CMPB register.
//
//*****************************************************************************
#define PWM_3_CMPB_COMPB_M 0x0000FFFF // Comparator B Value
#define PWM_3_CMPB_COMPB_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_3_GENA register.
//
//*****************************************************************************
#define PWM_3_GENA_ACTCMPBD_M 0x00000C00 // Action for Comparator B Down
#define PWM_3_GENA_ACTCMPBD_NONE \
0x00000000 // Do nothing
#define PWM_3_GENA_ACTCMPBD_INV 0x00000400 // Invert pwmA
#define PWM_3_GENA_ACTCMPBD_ZERO \
0x00000800 // Drive pwmA Low
#define PWM_3_GENA_ACTCMPBD_ONE 0x00000C00 // Drive pwmA High
#define PWM_3_GENA_ACTCMPBU_M 0x00000300 // Action for Comparator B Up
#define PWM_3_GENA_ACTCMPBU_NONE \
0x00000000 // Do nothing
#define PWM_3_GENA_ACTCMPBU_INV 0x00000100 // Invert pwmA
#define PWM_3_GENA_ACTCMPBU_ZERO \
0x00000200 // Drive pwmA Low
#define PWM_3_GENA_ACTCMPBU_ONE 0x00000300 // Drive pwmA High
#define PWM_3_GENA_ACTCMPAD_M 0x000000C0 // Action for Comparator A Down
#define PWM_3_GENA_ACTCMPAD_NONE \
0x00000000 // Do nothing
#define PWM_3_GENA_ACTCMPAD_INV 0x00000040 // Invert pwmA
#define PWM_3_GENA_ACTCMPAD_ZERO \
0x00000080 // Drive pwmA Low
#define PWM_3_GENA_ACTCMPAD_ONE 0x000000C0 // Drive pwmA High
#define PWM_3_GENA_ACTCMPAU_M 0x00000030 // Action for Comparator A Up
#define PWM_3_GENA_ACTCMPAU_NONE \
0x00000000 // Do nothing
#define PWM_3_GENA_ACTCMPAU_INV 0x00000010 // Invert pwmA
#define PWM_3_GENA_ACTCMPAU_ZERO \
0x00000020 // Drive pwmA Low
#define PWM_3_GENA_ACTCMPAU_ONE 0x00000030 // Drive pwmA High
#define PWM_3_GENA_ACTLOAD_M 0x0000000C // Action for Counter=LOAD
#define PWM_3_GENA_ACTLOAD_NONE 0x00000000 // Do nothing
#define PWM_3_GENA_ACTLOAD_INV 0x00000004 // Invert pwmA
#define PWM_3_GENA_ACTLOAD_ZERO 0x00000008 // Drive pwmA Low
#define PWM_3_GENA_ACTLOAD_ONE 0x0000000C // Drive pwmA High
#define PWM_3_GENA_ACTZERO_M 0x00000003 // Action for Counter=0
#define PWM_3_GENA_ACTZERO_NONE 0x00000000 // Do nothing
#define PWM_3_GENA_ACTZERO_INV 0x00000001 // Invert pwmA
#define PWM_3_GENA_ACTZERO_ZERO 0x00000002 // Drive pwmA Low
#define PWM_3_GENA_ACTZERO_ONE 0x00000003 // Drive pwmA High
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_3_GENB register.
//
//*****************************************************************************
#define PWM_3_GENB_ACTCMPBD_M 0x00000C00 // Action for Comparator B Down
#define PWM_3_GENB_ACTCMPBD_NONE \
0x00000000 // Do nothing
#define PWM_3_GENB_ACTCMPBD_INV 0x00000400 // Invert pwmB
#define PWM_3_GENB_ACTCMPBD_ZERO \
0x00000800 // Drive pwmB Low
#define PWM_3_GENB_ACTCMPBD_ONE 0x00000C00 // Drive pwmB High
#define PWM_3_GENB_ACTCMPBU_M 0x00000300 // Action for Comparator B Up
#define PWM_3_GENB_ACTCMPBU_NONE \
0x00000000 // Do nothing
#define PWM_3_GENB_ACTCMPBU_INV 0x00000100 // Invert pwmB
#define PWM_3_GENB_ACTCMPBU_ZERO \
0x00000200 // Drive pwmB Low
#define PWM_3_GENB_ACTCMPBU_ONE 0x00000300 // Drive pwmB High
#define PWM_3_GENB_ACTCMPAD_M 0x000000C0 // Action for Comparator A Down
#define PWM_3_GENB_ACTCMPAD_NONE \
0x00000000 // Do nothing
#define PWM_3_GENB_ACTCMPAD_INV 0x00000040 // Invert pwmB
#define PWM_3_GENB_ACTCMPAD_ZERO \
0x00000080 // Drive pwmB Low
#define PWM_3_GENB_ACTCMPAD_ONE 0x000000C0 // Drive pwmB High
#define PWM_3_GENB_ACTCMPAU_M 0x00000030 // Action for Comparator A Up
#define PWM_3_GENB_ACTCMPAU_NONE \
0x00000000 // Do nothing
#define PWM_3_GENB_ACTCMPAU_INV 0x00000010 // Invert pwmB
#define PWM_3_GENB_ACTCMPAU_ZERO \
0x00000020 // Drive pwmB Low
#define PWM_3_GENB_ACTCMPAU_ONE 0x00000030 // Drive pwmB High
#define PWM_3_GENB_ACTLOAD_M 0x0000000C // Action for Counter=LOAD
#define PWM_3_GENB_ACTLOAD_NONE 0x00000000 // Do nothing
#define PWM_3_GENB_ACTLOAD_INV 0x00000004 // Invert pwmB
#define PWM_3_GENB_ACTLOAD_ZERO 0x00000008 // Drive pwmB Low
#define PWM_3_GENB_ACTLOAD_ONE 0x0000000C // Drive pwmB High
#define PWM_3_GENB_ACTZERO_M 0x00000003 // Action for Counter=0
#define PWM_3_GENB_ACTZERO_NONE 0x00000000 // Do nothing
#define PWM_3_GENB_ACTZERO_INV 0x00000001 // Invert pwmB
#define PWM_3_GENB_ACTZERO_ZERO 0x00000002 // Drive pwmB Low
#define PWM_3_GENB_ACTZERO_ONE 0x00000003 // Drive pwmB High
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_3_DBCTL register.
//
//*****************************************************************************
#define PWM_3_DBCTL_ENABLE 0x00000001 // Dead-Band Generator Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_3_DBRISE register.
//
//*****************************************************************************
#define PWM_3_DBRISE_RISEDELAY_M \
0x00000FFF // Dead-Band Rise Delay
#define PWM_3_DBRISE_RISEDELAY_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_3_DBFALL register.
//
//*****************************************************************************
#define PWM_3_DBFALL_FALLDELAY_M \
0x00000FFF // Dead-Band Fall Delay
#define PWM_3_DBFALL_FALLDELAY_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_3_FLTSRC0
// register.
//
//*****************************************************************************
#define PWM_3_FLTSRC0_FAULT3 0x00000008 // Fault3 Input
#define PWM_3_FLTSRC0_FAULT2 0x00000004 // Fault2 Input
#define PWM_3_FLTSRC0_FAULT1 0x00000002 // Fault1 Input
#define PWM_3_FLTSRC0_FAULT0 0x00000001 // Fault0 Input
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_3_FLTSRC1
// register.
//
//*****************************************************************************
#define PWM_3_FLTSRC1_DCMP7 0x00000080 // Digital Comparator 7
#define PWM_3_FLTSRC1_DCMP6 0x00000040 // Digital Comparator 6
#define PWM_3_FLTSRC1_DCMP5 0x00000020 // Digital Comparator 5
#define PWM_3_FLTSRC1_DCMP4 0x00000010 // Digital Comparator 4
#define PWM_3_FLTSRC1_DCMP3 0x00000008 // Digital Comparator 3
#define PWM_3_FLTSRC1_DCMP2 0x00000004 // Digital Comparator 2
#define PWM_3_FLTSRC1_DCMP1 0x00000002 // Digital Comparator 1
#define PWM_3_FLTSRC1_DCMP0 0x00000001 // Digital Comparator 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_3_MINFLTPER
// register.
//
//*****************************************************************************
#define PWM_3_MINFLTPER_MFP_M 0x0000FFFF // Minimum Fault Period
#define PWM_3_MINFLTPER_MFP_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_0_FLTSEN register.
//
//*****************************************************************************
#define PWM_0_FLTSEN_FAULT3 0x00000008 // Fault3 Sense
#define PWM_0_FLTSEN_FAULT2 0x00000004 // Fault2 Sense
#define PWM_0_FLTSEN_FAULT1 0x00000002 // Fault1 Sense
#define PWM_0_FLTSEN_FAULT0 0x00000001 // Fault0 Sense
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_0_FLTSTAT0
// register.
//
//*****************************************************************************
#define PWM_0_FLTSTAT0_FAULT3 0x00000008 // Fault Input 3
#define PWM_0_FLTSTAT0_FAULT2 0x00000004 // Fault Input 2
#define PWM_0_FLTSTAT0_FAULT1 0x00000002 // Fault Input 1
#define PWM_0_FLTSTAT0_FAULT0 0x00000001 // Fault Input 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_0_FLTSTAT1
// register.
//
//*****************************************************************************
#define PWM_0_FLTSTAT1_DCMP7 0x00000080 // Digital Comparator 7 Trigger
#define PWM_0_FLTSTAT1_DCMP6 0x00000040 // Digital Comparator 6 Trigger
#define PWM_0_FLTSTAT1_DCMP5 0x00000020 // Digital Comparator 5 Trigger
#define PWM_0_FLTSTAT1_DCMP4 0x00000010 // Digital Comparator 4 Trigger
#define PWM_0_FLTSTAT1_DCMP3 0x00000008 // Digital Comparator 3 Trigger
#define PWM_0_FLTSTAT1_DCMP2 0x00000004 // Digital Comparator 2 Trigger
#define PWM_0_FLTSTAT1_DCMP1 0x00000002 // Digital Comparator 1 Trigger
#define PWM_0_FLTSTAT1_DCMP0 0x00000001 // Digital Comparator 0 Trigger
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_1_FLTSEN register.
//
//*****************************************************************************
#define PWM_1_FLTSEN_FAULT3 0x00000008 // Fault3 Sense
#define PWM_1_FLTSEN_FAULT2 0x00000004 // Fault2 Sense
#define PWM_1_FLTSEN_FAULT1 0x00000002 // Fault1 Sense
#define PWM_1_FLTSEN_FAULT0 0x00000001 // Fault0 Sense
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_1_FLTSTAT0
// register.
//
//*****************************************************************************
#define PWM_1_FLTSTAT0_FAULT3 0x00000008 // Fault Input 3
#define PWM_1_FLTSTAT0_FAULT2 0x00000004 // Fault Input 2
#define PWM_1_FLTSTAT0_FAULT1 0x00000002 // Fault Input 1
#define PWM_1_FLTSTAT0_FAULT0 0x00000001 // Fault Input 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_1_FLTSTAT1
// register.
//
//*****************************************************************************
#define PWM_1_FLTSTAT1_DCMP7 0x00000080 // Digital Comparator 7 Trigger
#define PWM_1_FLTSTAT1_DCMP6 0x00000040 // Digital Comparator 6 Trigger
#define PWM_1_FLTSTAT1_DCMP5 0x00000020 // Digital Comparator 5 Trigger
#define PWM_1_FLTSTAT1_DCMP4 0x00000010 // Digital Comparator 4 Trigger
#define PWM_1_FLTSTAT1_DCMP3 0x00000008 // Digital Comparator 3 Trigger
#define PWM_1_FLTSTAT1_DCMP2 0x00000004 // Digital Comparator 2 Trigger
#define PWM_1_FLTSTAT1_DCMP1 0x00000002 // Digital Comparator 1 Trigger
#define PWM_1_FLTSTAT1_DCMP0 0x00000001 // Digital Comparator 0 Trigger
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_2_FLTSEN register.
//
//*****************************************************************************
#define PWM_2_FLTSEN_FAULT3 0x00000008 // Fault3 Sense
#define PWM_2_FLTSEN_FAULT2 0x00000004 // Fault2 Sense
#define PWM_2_FLTSEN_FAULT1 0x00000002 // Fault1 Sense
#define PWM_2_FLTSEN_FAULT0 0x00000001 // Fault0 Sense
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_2_FLTSTAT0
// register.
//
//*****************************************************************************
#define PWM_2_FLTSTAT0_FAULT3 0x00000008 // Fault Input 3
#define PWM_2_FLTSTAT0_FAULT2 0x00000004 // Fault Input 2
#define PWM_2_FLTSTAT0_FAULT1 0x00000002 // Fault Input 1
#define PWM_2_FLTSTAT0_FAULT0 0x00000001 // Fault Input 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_2_FLTSTAT1
// register.
//
//*****************************************************************************
#define PWM_2_FLTSTAT1_DCMP7 0x00000080 // Digital Comparator 7 Trigger
#define PWM_2_FLTSTAT1_DCMP6 0x00000040 // Digital Comparator 6 Trigger
#define PWM_2_FLTSTAT1_DCMP5 0x00000020 // Digital Comparator 5 Trigger
#define PWM_2_FLTSTAT1_DCMP4 0x00000010 // Digital Comparator 4 Trigger
#define PWM_2_FLTSTAT1_DCMP3 0x00000008 // Digital Comparator 3 Trigger
#define PWM_2_FLTSTAT1_DCMP2 0x00000004 // Digital Comparator 2 Trigger
#define PWM_2_FLTSTAT1_DCMP1 0x00000002 // Digital Comparator 1 Trigger
#define PWM_2_FLTSTAT1_DCMP0 0x00000001 // Digital Comparator 0 Trigger
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_3_FLTSEN register.
//
//*****************************************************************************
#define PWM_3_FLTSEN_FAULT3 0x00000008 // Fault3 Sense
#define PWM_3_FLTSEN_FAULT2 0x00000004 // Fault2 Sense
#define PWM_3_FLTSEN_FAULT1 0x00000002 // Fault1 Sense
#define PWM_3_FLTSEN_FAULT0 0x00000001 // Fault0 Sense
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_3_FLTSTAT0
// register.
//
//*****************************************************************************
#define PWM_3_FLTSTAT0_FAULT3 0x00000008 // Fault Input 3
#define PWM_3_FLTSTAT0_FAULT2 0x00000004 // Fault Input 2
#define PWM_3_FLTSTAT0_FAULT1 0x00000002 // Fault Input 1
#define PWM_3_FLTSTAT0_FAULT0 0x00000001 // Fault Input 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_3_FLTSTAT1
// register.
//
//*****************************************************************************
#define PWM_3_FLTSTAT1_DCMP7 0x00000080 // Digital Comparator 7 Trigger
#define PWM_3_FLTSTAT1_DCMP6 0x00000040 // Digital Comparator 6 Trigger
#define PWM_3_FLTSTAT1_DCMP5 0x00000020 // Digital Comparator 5 Trigger
#define PWM_3_FLTSTAT1_DCMP4 0x00000010 // Digital Comparator 4 Trigger
#define PWM_3_FLTSTAT1_DCMP3 0x00000008 // Digital Comparator 3 Trigger
#define PWM_3_FLTSTAT1_DCMP2 0x00000004 // Digital Comparator 2 Trigger
#define PWM_3_FLTSTAT1_DCMP1 0x00000002 // Digital Comparator 1 Trigger
#define PWM_3_FLTSTAT1_DCMP0 0x00000001 // Digital Comparator 0 Trigger
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_PP register.
//
//*****************************************************************************
#define PWM_PP_ONE 0x00000400 // One-Shot Mode
#define PWM_PP_EFAULT 0x00000200 // Extended Fault
#define PWM_PP_ESYNC 0x00000100 // Extended Synchronization
#define PWM_PP_FCNT_M 0x000000F0 // Fault Inputs (per PWM unit)
#define PWM_PP_GCNT_M 0x0000000F // Generators
#define PWM_PP_FCNT_S 4
#define PWM_PP_GCNT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_CC register.
//
//*****************************************************************************
#define PWM_CC_USEPWM 0x00000100 // Use PWM Clock Divisor
#define PWM_CC_PWMDIV_M 0x00000007 // PWM Clock Divider
#define PWM_CC_PWMDIV_2 0x00000000 // /2
#define PWM_CC_PWMDIV_4 0x00000001 // /4
#define PWM_CC_PWMDIV_8 0x00000002 // /8
#define PWM_CC_PWMDIV_16 0x00000003 // /16
#define PWM_CC_PWMDIV_32 0x00000004 // /32
#define PWM_CC_PWMDIV_64 0x00000005 // /64
//*****************************************************************************
//
// The following are defines for the bit fields in the QEI_O_CTL register.
//
//*****************************************************************************
#define QEI_CTL_FILTCNT_M 0x000F0000 // Input Filter Prescale Count
#define QEI_CTL_FILTEN 0x00002000 // Enable Input Filter
#define QEI_CTL_STALLEN 0x00001000 // Stall QEI
#define QEI_CTL_INVI 0x00000800 // Invert Index Pulse
#define QEI_CTL_INVB 0x00000400 // Invert PhB
#define QEI_CTL_INVA 0x00000200 // Invert PhA
#define QEI_CTL_VELDIV_M 0x000001C0 // Predivide Velocity
#define QEI_CTL_VELDIV_1 0x00000000 // QEI clock /1
#define QEI_CTL_VELDIV_2 0x00000040 // QEI clock /2
#define QEI_CTL_VELDIV_4 0x00000080 // QEI clock /4
#define QEI_CTL_VELDIV_8 0x000000C0 // QEI clock /8
#define QEI_CTL_VELDIV_16 0x00000100 // QEI clock /16
#define QEI_CTL_VELDIV_32 0x00000140 // QEI clock /32
#define QEI_CTL_VELDIV_64 0x00000180 // QEI clock /64
#define QEI_CTL_VELDIV_128 0x000001C0 // QEI clock /128
#define QEI_CTL_VELEN 0x00000020 // Capture Velocity
#define QEI_CTL_RESMODE 0x00000010 // Reset Mode
#define QEI_CTL_CAPMODE 0x00000008 // Capture Mode
#define QEI_CTL_SIGMODE 0x00000004 // Signal Mode
#define QEI_CTL_SWAP 0x00000002 // Swap Signals
#define QEI_CTL_ENABLE 0x00000001 // Enable QEI
#define QEI_CTL_FILTCNT_S 16
//*****************************************************************************
//
// The following are defines for the bit fields in the QEI_O_STAT register.
//
//*****************************************************************************
#define QEI_STAT_DIRECTION 0x00000002 // Direction of Rotation
#define QEI_STAT_ERROR 0x00000001 // Error Detected
//*****************************************************************************
//
// The following are defines for the bit fields in the QEI_O_POS register.
//
//*****************************************************************************
#define QEI_POS_M 0xFFFFFFFF // Current Position Integrator
// Value
#define QEI_POS_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the QEI_O_MAXPOS register.
//
//*****************************************************************************
#define QEI_MAXPOS_M 0xFFFFFFFF // Maximum Position Integrator
// Value
#define QEI_MAXPOS_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the QEI_O_LOAD register.
//
//*****************************************************************************
#define QEI_LOAD_M 0xFFFFFFFF // Velocity Timer Load Value
#define QEI_LOAD_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the QEI_O_TIME register.
//
//*****************************************************************************
#define QEI_TIME_M 0xFFFFFFFF // Velocity Timer Current Value
#define QEI_TIME_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the QEI_O_COUNT register.
//
//*****************************************************************************
#define QEI_COUNT_M 0xFFFFFFFF // Velocity Pulse Count
#define QEI_COUNT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the QEI_O_SPEED register.
//
//*****************************************************************************
#define QEI_SPEED_M 0xFFFFFFFF // Velocity
#define QEI_SPEED_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the QEI_O_INTEN register.
//
//*****************************************************************************
#define QEI_INTEN_ERROR 0x00000008 // Phase Error Interrupt Enable
#define QEI_INTEN_DIR 0x00000004 // Direction Change Interrupt
// Enable
#define QEI_INTEN_TIMER 0x00000002 // Timer Expires Interrupt Enable
#define QEI_INTEN_INDEX 0x00000001 // Index Pulse Detected Interrupt
// Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the QEI_O_RIS register.
//
//*****************************************************************************
#define QEI_RIS_ERROR 0x00000008 // Phase Error Detected
#define QEI_RIS_DIR 0x00000004 // Direction Change Detected
#define QEI_RIS_TIMER 0x00000002 // Velocity Timer Expired
#define QEI_RIS_INDEX 0x00000001 // Index Pulse Asserted
//*****************************************************************************
//
// The following are defines for the bit fields in the QEI_O_ISC register.
//
//*****************************************************************************
#define QEI_ISC_ERROR 0x00000008 // Phase Error Interrupt
#define QEI_ISC_DIR 0x00000004 // Direction Change Interrupt
#define QEI_ISC_TIMER 0x00000002 // Velocity Timer Expired Interrupt
#define QEI_ISC_INDEX 0x00000001 // Index Pulse Interrupt
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_CFG register.
//
//*****************************************************************************
#define TIMER_CFG_M 0x00000007 // GPTM Configuration
#define TIMER_CFG_32_BIT_TIMER 0x00000000 // For a 16/32-bit timer, this
// value selects the 32-bit timer
// configuration
#define TIMER_CFG_32_BIT_RTC 0x00000001 // For a 16/32-bit timer, this
// value selects the 32-bit
// real-time clock (RTC) counter
// configuration
#define TIMER_CFG_16_BIT 0x00000004 // For a 16/32-bit timer, this
// value selects the 16-bit timer
// configuration
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TAMR register.
//
//*****************************************************************************
#define TIMER_TAMR_TCACT_M 0x0000E000 // Timer Compare Action Select
#define TIMER_TAMR_TCACT_NONE 0x00000000 // Disable compare operations
#define TIMER_TAMR_TCACT_TOGGLE 0x00002000 // Toggle State on Time-Out
#define TIMER_TAMR_TCACT_CLRTO 0x00004000 // Clear CCP on Time-Out
#define TIMER_TAMR_TCACT_SETTO 0x00006000 // Set CCP on Time-Out
#define TIMER_TAMR_TCACT_SETTOGTO \
0x00008000 // Set CCP immediately and toggle
// on Time-Out
#define TIMER_TAMR_TCACT_CLRTOGTO \
0x0000A000 // Clear CCP immediately and toggle
// on Time-Out
#define TIMER_TAMR_TCACT_SETCLRTO \
0x0000C000 // Set CCP immediately and clear on
// Time-Out
#define TIMER_TAMR_TCACT_CLRSETTO \
0x0000E000 // Clear CCP immediately and set on
// Time-Out
#define TIMER_TAMR_TACINTD 0x00001000 // One-shot/Periodic Interrupt
// Disable
#define TIMER_TAMR_TAPLO 0x00000800 // GPTM Timer A PWM Legacy
// Operation
#define TIMER_TAMR_TAMRSU 0x00000400 // GPTM Timer A Match Register
// Update
#define TIMER_TAMR_TAPWMIE 0x00000200 // GPTM Timer A PWM Interrupt
// Enable
#define TIMER_TAMR_TAILD 0x00000100 // GPTM Timer A Interval Load Write
#define TIMER_TAMR_TASNAPS 0x00000080 // GPTM Timer A Snap-Shot Mode
#define TIMER_TAMR_TAWOT 0x00000040 // GPTM Timer A Wait-on-Trigger
#define TIMER_TAMR_TAMIE 0x00000020 // GPTM Timer A Match Interrupt
// Enable
#define TIMER_TAMR_TACDIR 0x00000010 // GPTM Timer A Count Direction
#define TIMER_TAMR_TAAMS 0x00000008 // GPTM Timer A Alternate Mode
// Select
#define TIMER_TAMR_TACMR 0x00000004 // GPTM Timer A Capture Mode
#define TIMER_TAMR_TAMR_M 0x00000003 // GPTM Timer A Mode
#define TIMER_TAMR_TAMR_1_SHOT 0x00000001 // One-Shot Timer mode
#define TIMER_TAMR_TAMR_PERIOD 0x00000002 // Periodic Timer mode
#define TIMER_TAMR_TAMR_CAP 0x00000003 // Capture mode
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TBMR register.
//
//*****************************************************************************
#define TIMER_TBMR_TCACT_M 0x0000E000 // Timer Compare Action Select
#define TIMER_TBMR_TCACT_NONE 0x00000000 // Disable compare operations
#define TIMER_TBMR_TCACT_TOGGLE 0x00002000 // Toggle State on Time-Out
#define TIMER_TBMR_TCACT_CLRTO 0x00004000 // Clear CCP on Time-Out
#define TIMER_TBMR_TCACT_SETTO 0x00006000 // Set CCP on Time-Out
#define TIMER_TBMR_TCACT_SETTOGTO \
0x00008000 // Set CCP immediately and toggle
// on Time-Out
#define TIMER_TBMR_TCACT_CLRTOGTO \
0x0000A000 // Clear CCP immediately and toggle
// on Time-Out
#define TIMER_TBMR_TCACT_SETCLRTO \
0x0000C000 // Set CCP immediately and clear on
// Time-Out
#define TIMER_TBMR_TCACT_CLRSETTO \
0x0000E000 // Clear CCP immediately and set on
// Time-Out
#define TIMER_TBMR_TBCINTD 0x00001000 // One-Shot/Periodic Interrupt
// Disable
#define TIMER_TBMR_TBPLO 0x00000800 // GPTM Timer B PWM Legacy
// Operation
#define TIMER_TBMR_TBMRSU 0x00000400 // GPTM Timer B Match Register
// Update
#define TIMER_TBMR_TBPWMIE 0x00000200 // GPTM Timer B PWM Interrupt
// Enable
#define TIMER_TBMR_TBILD 0x00000100 // GPTM Timer B Interval Load Write
#define TIMER_TBMR_TBSNAPS 0x00000080 // GPTM Timer B Snap-Shot Mode
#define TIMER_TBMR_TBWOT 0x00000040 // GPTM Timer B Wait-on-Trigger
#define TIMER_TBMR_TBMIE 0x00000020 // GPTM Timer B Match Interrupt
// Enable
#define TIMER_TBMR_TBCDIR 0x00000010 // GPTM Timer B Count Direction
#define TIMER_TBMR_TBAMS 0x00000008 // GPTM Timer B Alternate Mode
// Select
#define TIMER_TBMR_TBCMR 0x00000004 // GPTM Timer B Capture Mode
#define TIMER_TBMR_TBMR_M 0x00000003 // GPTM Timer B Mode
#define TIMER_TBMR_TBMR_1_SHOT 0x00000001 // One-Shot Timer mode
#define TIMER_TBMR_TBMR_PERIOD 0x00000002 // Periodic Timer mode
#define TIMER_TBMR_TBMR_CAP 0x00000003 // Capture mode
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_CTL register.
//
//*****************************************************************************
#define TIMER_CTL_TBPWML 0x00004000 // GPTM Timer B PWM Output Level
#define TIMER_CTL_TBOTE 0x00002000 // GPTM Timer B Output Trigger
// Enable
#define TIMER_CTL_TBEVENT_M 0x00000C00 // GPTM Timer B Event Mode
#define TIMER_CTL_TBEVENT_POS 0x00000000 // Positive edge
#define TIMER_CTL_TBEVENT_NEG 0x00000400 // Negative edge
#define TIMER_CTL_TBEVENT_BOTH 0x00000C00 // Both edges
#define TIMER_CTL_TBSTALL 0x00000200 // GPTM Timer B Stall Enable
#define TIMER_CTL_TBEN 0x00000100 // GPTM Timer B Enable
#define TIMER_CTL_TAPWML 0x00000040 // GPTM Timer A PWM Output Level
#define TIMER_CTL_TAOTE 0x00000020 // GPTM Timer A Output Trigger
// Enable
#define TIMER_CTL_RTCEN 0x00000010 // GPTM RTC Stall Enable
#define TIMER_CTL_TAEVENT_M 0x0000000C // GPTM Timer A Event Mode
#define TIMER_CTL_TAEVENT_POS 0x00000000 // Positive edge
#define TIMER_CTL_TAEVENT_NEG 0x00000004 // Negative edge
#define TIMER_CTL_TAEVENT_BOTH 0x0000000C // Both edges
#define TIMER_CTL_TASTALL 0x00000002 // GPTM Timer A Stall Enable
#define TIMER_CTL_TAEN 0x00000001 // GPTM Timer A Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_SYNC register.
//
//*****************************************************************************
#define TIMER_SYNC_SYNCT7_M 0x0000C000 // Synchronize GPTM Timer 7
#define TIMER_SYNC_SYNCT7_NONE 0x00000000 // GPT7 is not affected
#define TIMER_SYNC_SYNCT7_TA 0x00004000 // A timeout event for Timer A of
// GPTM7 is triggered
#define TIMER_SYNC_SYNCT7_TB 0x00008000 // A timeout event for Timer B of
// GPTM7 is triggered
#define TIMER_SYNC_SYNCT7_TATB 0x0000C000 // A timeout event for both Timer A
// and Timer B of GPTM7 is
// triggered
#define TIMER_SYNC_SYNCT6_M 0x00003000 // Synchronize GPTM Timer 6
#define TIMER_SYNC_SYNCT6_NONE 0x00000000 // GPTM6 is not affected
#define TIMER_SYNC_SYNCT6_TA 0x00001000 // A timeout event for Timer A of
// GPTM6 is triggered
#define TIMER_SYNC_SYNCT6_TB 0x00002000 // A timeout event for Timer B of
// GPTM6 is triggered
#define TIMER_SYNC_SYNCT6_TATB 0x00003000 // A timeout event for both Timer A
// and Timer B of GPTM6 is
// triggered
#define TIMER_SYNC_SYNCT5_M 0x00000C00 // Synchronize GPTM Timer 5
#define TIMER_SYNC_SYNCT5_NONE 0x00000000 // GPTM5 is not affected
#define TIMER_SYNC_SYNCT5_TA 0x00000400 // A timeout event for Timer A of
// GPTM5 is triggered
#define TIMER_SYNC_SYNCT5_TB 0x00000800 // A timeout event for Timer B of
// GPTM5 is triggered
#define TIMER_SYNC_SYNCT5_TATB 0x00000C00 // A timeout event for both Timer A
// and Timer B of GPTM5 is
// triggered
#define TIMER_SYNC_SYNCT4_M 0x00000300 // Synchronize GPTM Timer 4
#define TIMER_SYNC_SYNCT4_NONE 0x00000000 // GPTM4 is not affected
#define TIMER_SYNC_SYNCT4_TA 0x00000100 // A timeout event for Timer A of
// GPTM4 is triggered
#define TIMER_SYNC_SYNCT4_TB 0x00000200 // A timeout event for Timer B of
// GPTM4 is triggered
#define TIMER_SYNC_SYNCT4_TATB 0x00000300 // A timeout event for both Timer A
// and Timer B of GPTM4 is
// triggered
#define TIMER_SYNC_SYNCT3_M 0x000000C0 // Synchronize GPTM Timer 3
#define TIMER_SYNC_SYNCT3_NONE 0x00000000 // GPTM3 is not affected
#define TIMER_SYNC_SYNCT3_TA 0x00000040 // A timeout event for Timer A of
// GPTM3 is triggered
#define TIMER_SYNC_SYNCT3_TB 0x00000080 // A timeout event for Timer B of
// GPTM3 is triggered
#define TIMER_SYNC_SYNCT3_TATB 0x000000C0 // A timeout event for both Timer A
// and Timer B of GPTM3 is
// triggered
#define TIMER_SYNC_SYNCT2_M 0x00000030 // Synchronize GPTM Timer 2
#define TIMER_SYNC_SYNCT2_NONE 0x00000000 // GPTM2 is not affected
#define TIMER_SYNC_SYNCT2_TA 0x00000010 // A timeout event for Timer A of
// GPTM2 is triggered
#define TIMER_SYNC_SYNCT2_TB 0x00000020 // A timeout event for Timer B of
// GPTM2 is triggered
#define TIMER_SYNC_SYNCT2_TATB 0x00000030 // A timeout event for both Timer A
// and Timer B of GPTM2 is
// triggered
#define TIMER_SYNC_SYNCT1_M 0x0000000C // Synchronize GPTM Timer 1
#define TIMER_SYNC_SYNCT1_NONE 0x00000000 // GPTM1 is not affected
#define TIMER_SYNC_SYNCT1_TA 0x00000004 // A timeout event for Timer A of
// GPTM1 is triggered
#define TIMER_SYNC_SYNCT1_TB 0x00000008 // A timeout event for Timer B of
// GPTM1 is triggered
#define TIMER_SYNC_SYNCT1_TATB 0x0000000C // A timeout event for both Timer A
// and Timer B of GPTM1 is
// triggered
#define TIMER_SYNC_SYNCT0_M 0x00000003 // Synchronize GPTM Timer 0
#define TIMER_SYNC_SYNCT0_NONE 0x00000000 // GPTM0 is not affected
#define TIMER_SYNC_SYNCT0_TA 0x00000001 // A timeout event for Timer A of
// GPTM0 is triggered
#define TIMER_SYNC_SYNCT0_TB 0x00000002 // A timeout event for Timer B of
// GPTM0 is triggered
#define TIMER_SYNC_SYNCT0_TATB 0x00000003 // A timeout event for both Timer A
// and Timer B of GPTM0 is
// triggered
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_IMR register.
//
//*****************************************************************************
#define TIMER_IMR_DMABIM 0x00002000 // GPTM Timer B DMA Done Interrupt
// Mask
#define TIMER_IMR_TBMIM 0x00000800 // GPTM Timer B Match Interrupt
// Mask
#define TIMER_IMR_CBEIM 0x00000400 // GPTM Timer B Capture Mode Event
// Interrupt Mask
#define TIMER_IMR_CBMIM 0x00000200 // GPTM Timer B Capture Mode Match
// Interrupt Mask
#define TIMER_IMR_TBTOIM 0x00000100 // GPTM Timer B Time-Out Interrupt
// Mask
#define TIMER_IMR_DMAAIM 0x00000020 // GPTM Timer A DMA Done Interrupt
// Mask
#define TIMER_IMR_TAMIM 0x00000010 // GPTM Timer A Match Interrupt
// Mask
#define TIMER_IMR_RTCIM 0x00000008 // GPTM RTC Interrupt Mask
#define TIMER_IMR_CAEIM 0x00000004 // GPTM Timer A Capture Mode Event
// Interrupt Mask
#define TIMER_IMR_CAMIM 0x00000002 // GPTM Timer A Capture Mode Match
// Interrupt Mask
#define TIMER_IMR_TATOIM 0x00000001 // GPTM Timer A Time-Out Interrupt
// Mask
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_RIS register.
//
//*****************************************************************************
#define TIMER_RIS_DMABRIS 0x00002000 // GPTM Timer B DMA Done Raw
// Interrupt Status
#define TIMER_RIS_TBMRIS 0x00000800 // GPTM Timer B Match Raw Interrupt
#define TIMER_RIS_CBERIS 0x00000400 // GPTM Timer B Capture Mode Event
// Raw Interrupt
#define TIMER_RIS_CBMRIS 0x00000200 // GPTM Timer B Capture Mode Match
// Raw Interrupt
#define TIMER_RIS_TBTORIS 0x00000100 // GPTM Timer B Time-Out Raw
// Interrupt
#define TIMER_RIS_DMAARIS 0x00000020 // GPTM Timer A DMA Done Raw
// Interrupt Status
#define TIMER_RIS_TAMRIS 0x00000010 // GPTM Timer A Match Raw Interrupt
#define TIMER_RIS_RTCRIS 0x00000008 // GPTM RTC Raw Interrupt
#define TIMER_RIS_CAERIS 0x00000004 // GPTM Timer A Capture Mode Event
// Raw Interrupt
#define TIMER_RIS_CAMRIS 0x00000002 // GPTM Timer A Capture Mode Match
// Raw Interrupt
#define TIMER_RIS_TATORIS 0x00000001 // GPTM Timer A Time-Out Raw
// Interrupt
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_MIS register.
//
//*****************************************************************************
#define TIMER_MIS_DMABMIS 0x00002000 // GPTM Timer B DMA Done Masked
// Interrupt
#define TIMER_MIS_TBMMIS 0x00000800 // GPTM Timer B Match Masked
// Interrupt
#define TIMER_MIS_CBEMIS 0x00000400 // GPTM Timer B Capture Mode Event
// Masked Interrupt
#define TIMER_MIS_CBMMIS 0x00000200 // GPTM Timer B Capture Mode Match
// Masked Interrupt
#define TIMER_MIS_TBTOMIS 0x00000100 // GPTM Timer B Time-Out Masked
// Interrupt
#define TIMER_MIS_DMAAMIS 0x00000020 // GPTM Timer A DMA Done Masked
// Interrupt
#define TIMER_MIS_TAMMIS 0x00000010 // GPTM Timer A Match Masked
// Interrupt
#define TIMER_MIS_RTCMIS 0x00000008 // GPTM RTC Masked Interrupt
#define TIMER_MIS_CAEMIS 0x00000004 // GPTM Timer A Capture Mode Event
// Masked Interrupt
#define TIMER_MIS_CAMMIS 0x00000002 // GPTM Timer A Capture Mode Match
// Masked Interrupt
#define TIMER_MIS_TATOMIS 0x00000001 // GPTM Timer A Time-Out Masked
// Interrupt
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_ICR register.
//
//*****************************************************************************
#define TIMER_ICR_DMABINT 0x00002000 // GPTM Timer B DMA Done Interrupt
// Clear
#define TIMER_ICR_TBMCINT 0x00000800 // GPTM Timer B Match Interrupt
// Clear
#define TIMER_ICR_CBECINT 0x00000400 // GPTM Timer B Capture Mode Event
// Interrupt Clear
#define TIMER_ICR_CBMCINT 0x00000200 // GPTM Timer B Capture Mode Match
// Interrupt Clear
#define TIMER_ICR_TBTOCINT 0x00000100 // GPTM Timer B Time-Out Interrupt
// Clear
#define TIMER_ICR_DMAAINT 0x00000020 // GPTM Timer A DMA Done Interrupt
// Clear
#define TIMER_ICR_TAMCINT 0x00000010 // GPTM Timer A Match Interrupt
// Clear
#define TIMER_ICR_RTCCINT 0x00000008 // GPTM RTC Interrupt Clear
#define TIMER_ICR_CAECINT 0x00000004 // GPTM Timer A Capture Mode Event
// Interrupt Clear
#define TIMER_ICR_CAMCINT 0x00000002 // GPTM Timer A Capture Mode Match
// Interrupt Clear
#define TIMER_ICR_TATOCINT 0x00000001 // GPTM Timer A Time-Out Raw
// Interrupt
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TAILR register.
//
//*****************************************************************************
#define TIMER_TAILR_M 0xFFFFFFFF // GPTM Timer A Interval Load
// Register
#define TIMER_TAILR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TBILR register.
//
//*****************************************************************************
#define TIMER_TBILR_M 0xFFFFFFFF // GPTM Timer B Interval Load
// Register
#define TIMER_TBILR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TAMATCHR
// register.
//
//*****************************************************************************
#define TIMER_TAMATCHR_TAMR_M 0xFFFFFFFF // GPTM Timer A Match Register
#define TIMER_TAMATCHR_TAMR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TBMATCHR
// register.
//
//*****************************************************************************
#define TIMER_TBMATCHR_TBMR_M 0xFFFFFFFF // GPTM Timer B Match Register
#define TIMER_TBMATCHR_TBMR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TAPR register.
//
//*****************************************************************************
#define TIMER_TAPR_TAPSR_M 0x000000FF // GPTM Timer A Prescale
#define TIMER_TAPR_TAPSR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TBPR register.
//
//*****************************************************************************
#define TIMER_TBPR_TBPSR_M 0x000000FF // GPTM Timer B Prescale
#define TIMER_TBPR_TBPSR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TAPMR register.
//
//*****************************************************************************
#define TIMER_TAPMR_TAPSMR_M 0x000000FF // GPTM TimerA Prescale Match
#define TIMER_TAPMR_TAPSMR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TBPMR register.
//
//*****************************************************************************
#define TIMER_TBPMR_TBPSMR_M 0x000000FF // GPTM TimerB Prescale Match
#define TIMER_TBPMR_TBPSMR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TAR register.
//
//*****************************************************************************
#define TIMER_TAR_M 0xFFFFFFFF // GPTM Timer A Register
#define TIMER_TAR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TBR register.
//
//*****************************************************************************
#define TIMER_TBR_M 0xFFFFFFFF // GPTM Timer B Register
#define TIMER_TBR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TAV register.
//
//*****************************************************************************
#define TIMER_TAV_M 0xFFFFFFFF // GPTM Timer A Value
#define TIMER_TAV_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TBV register.
//
//*****************************************************************************
#define TIMER_TBV_M 0xFFFFFFFF // GPTM Timer B Value
#define TIMER_TBV_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_RTCPD register.
//
//*****************************************************************************
#define TIMER_RTCPD_RTCPD_M 0x0000FFFF // RTC Predivide Counter Value
#define TIMER_RTCPD_RTCPD_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TAPS register.
//
//*****************************************************************************
#define TIMER_TAPS_PSS_M 0x0000FFFF // GPTM Timer A Prescaler Snapshot
#define TIMER_TAPS_PSS_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TBPS register.
//
//*****************************************************************************
#define TIMER_TBPS_PSS_M 0x0000FFFF // GPTM Timer A Prescaler Value
#define TIMER_TBPS_PSS_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_DMAEV register.
//
//*****************************************************************************
#define TIMER_DMAEV_TBMDMAEN 0x00000800 // GPTM B Mode Match Event DMA
// Trigger Enable
#define TIMER_DMAEV_CBEDMAEN 0x00000400 // GPTM B Capture Event DMA Trigger
// Enable
#define TIMER_DMAEV_CBMDMAEN 0x00000200 // GPTM B Capture Match Event DMA
// Trigger Enable
#define TIMER_DMAEV_TBTODMAEN 0x00000100 // GPTM B Time-Out Event DMA
// Trigger Enable
#define TIMER_DMAEV_TAMDMAEN 0x00000010 // GPTM A Mode Match Event DMA
// Trigger Enable
#define TIMER_DMAEV_RTCDMAEN 0x00000008 // GPTM A RTC Match Event DMA
// Trigger Enable
#define TIMER_DMAEV_CAEDMAEN 0x00000004 // GPTM A Capture Event DMA Trigger
// Enable
#define TIMER_DMAEV_CAMDMAEN 0x00000002 // GPTM A Capture Match Event DMA
// Trigger Enable
#define TIMER_DMAEV_TATODMAEN 0x00000001 // GPTM A Time-Out Event DMA
// Trigger Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_ADCEV register.
//
//*****************************************************************************
#define TIMER_ADCEV_TBMADCEN 0x00000800 // GPTM B Mode Match Event ADC
// Trigger Enable
#define TIMER_ADCEV_CBEADCEN 0x00000400 // GPTM B Capture Event ADC Trigger
// Enable
#define TIMER_ADCEV_CBMADCEN 0x00000200 // GPTM B Capture Match Event ADC
// Trigger Enable
#define TIMER_ADCEV_TBTOADCEN 0x00000100 // GPTM B Time-Out Event ADC
// Trigger Enable
#define TIMER_ADCEV_TAMADCEN 0x00000010 // GPTM A Mode Match Event ADC
// Trigger Enable
#define TIMER_ADCEV_RTCADCEN 0x00000008 // GPTM RTC Match Event ADC Trigger
// Enable
#define TIMER_ADCEV_CAEADCEN 0x00000004 // GPTM A Capture Event ADC Trigger
// Enable
#define TIMER_ADCEV_CAMADCEN 0x00000002 // GPTM A Capture Match Event ADC
// Trigger Enable
#define TIMER_ADCEV_TATOADCEN 0x00000001 // GPTM A Time-Out Event ADC
// Trigger Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_PP register.
//
//*****************************************************************************
#define TIMER_PP_SYNCCNT 0x00000020 // Synchronize Start
#define TIMER_PP_CHAIN 0x00000010 // Chain with Other Timers
#define TIMER_PP_SIZE_M 0x0000000F // Count Size
#define TIMER_PP_SIZE_16 0x00000000 // Timer A and Timer B counters are
// 16 bits each with an 8-bit
// prescale counter
#define TIMER_PP_SIZE_32 0x00000001 // Timer A and Timer B counters are
// 32 bits each with a 16-bit
// prescale counter
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_ACTSS register.
//
//*****************************************************************************
#define ADC_ACTSS_BUSY 0x00010000 // ADC Busy
#define ADC_ACTSS_ADEN3 0x00000800 // ADC SS3 DMA Enable
#define ADC_ACTSS_ADEN2 0x00000400 // ADC SS2 DMA Enable
#define ADC_ACTSS_ADEN1 0x00000200 // ADC SS1 DMA Enable
#define ADC_ACTSS_ADEN0 0x00000100 // ADC SS1 DMA Enable
#define ADC_ACTSS_ASEN3 0x00000008 // ADC SS3 Enable
#define ADC_ACTSS_ASEN2 0x00000004 // ADC SS2 Enable
#define ADC_ACTSS_ASEN1 0x00000002 // ADC SS1 Enable
#define ADC_ACTSS_ASEN0 0x00000001 // ADC SS0 Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_RIS register.
//
//*****************************************************************************
#define ADC_RIS_INRDC 0x00010000 // Digital Comparator Raw Interrupt
// Status
#define ADC_RIS_DMAINR3 0x00000800 // SS3 DMA Raw Interrupt Status
#define ADC_RIS_DMAINR2 0x00000400 // SS2 DMA Raw Interrupt Status
#define ADC_RIS_DMAINR1 0x00000200 // SS1 DMA Raw Interrupt Status
#define ADC_RIS_DMAINR0 0x00000100 // SS0 DMA Raw Interrupt Status
#define ADC_RIS_INR3 0x00000008 // SS3 Raw Interrupt Status
#define ADC_RIS_INR2 0x00000004 // SS2 Raw Interrupt Status
#define ADC_RIS_INR1 0x00000002 // SS1 Raw Interrupt Status
#define ADC_RIS_INR0 0x00000001 // SS0 Raw Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_IM register.
//
//*****************************************************************************
#define ADC_IM_DCONSS3 0x00080000 // Digital Comparator Interrupt on
// SS3
#define ADC_IM_DCONSS2 0x00040000 // Digital Comparator Interrupt on
// SS2
#define ADC_IM_DCONSS1 0x00020000 // Digital Comparator Interrupt on
// SS1
#define ADC_IM_DCONSS0 0x00010000 // Digital Comparator Interrupt on
// SS0
#define ADC_IM_DMAMASK3 0x00000800 // SS3 DMA Interrupt Mask
#define ADC_IM_DMAMASK2 0x00000400 // SS2 DMA Interrupt Mask
#define ADC_IM_DMAMASK1 0x00000200 // SS1 DMA Interrupt Mask
#define ADC_IM_DMAMASK0 0x00000100 // SS0 DMA Interrupt Mask
#define ADC_IM_MASK3 0x00000008 // SS3 Interrupt Mask
#define ADC_IM_MASK2 0x00000004 // SS2 Interrupt Mask
#define ADC_IM_MASK1 0x00000002 // SS1 Interrupt Mask
#define ADC_IM_MASK0 0x00000001 // SS0 Interrupt Mask
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_ISC register.
//
//*****************************************************************************
#define ADC_ISC_DCINSS3 0x00080000 // Digital Comparator Interrupt
// Status on SS3
#define ADC_ISC_DCINSS2 0x00040000 // Digital Comparator Interrupt
// Status on SS2
#define ADC_ISC_DCINSS1 0x00020000 // Digital Comparator Interrupt
// Status on SS1
#define ADC_ISC_DCINSS0 0x00010000 // Digital Comparator Interrupt
// Status on SS0
#define ADC_ISC_DMAIN3 0x00000800 // SS3 DMA Interrupt Status and
// Clear
#define ADC_ISC_DMAIN2 0x00000400 // SS2 DMA Interrupt Status and
// Clear
#define ADC_ISC_DMAIN1 0x00000200 // SS1 DMA Interrupt Status and
// Clear
#define ADC_ISC_DMAIN0 0x00000100 // SS0 DMA Interrupt Status and
// Clear
#define ADC_ISC_IN3 0x00000008 // SS3 Interrupt Status and Clear
#define ADC_ISC_IN2 0x00000004 // SS2 Interrupt Status and Clear
#define ADC_ISC_IN1 0x00000002 // SS1 Interrupt Status and Clear
#define ADC_ISC_IN0 0x00000001 // SS0 Interrupt Status and Clear
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_OSTAT register.
//
//*****************************************************************************
#define ADC_OSTAT_OV3 0x00000008 // SS3 FIFO Overflow
#define ADC_OSTAT_OV2 0x00000004 // SS2 FIFO Overflow
#define ADC_OSTAT_OV1 0x00000002 // SS1 FIFO Overflow
#define ADC_OSTAT_OV0 0x00000001 // SS0 FIFO Overflow
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_EMUX register.
//
//*****************************************************************************
#define ADC_EMUX_EM3_M 0x0000F000 // SS3 Trigger Select
#define ADC_EMUX_EM3_PROCESSOR 0x00000000 // Processor (default)
#define ADC_EMUX_EM3_COMP0 0x00001000 // Analog Comparator 0
#define ADC_EMUX_EM3_COMP1 0x00002000 // Analog Comparator 1
#define ADC_EMUX_EM3_COMP2 0x00003000 // Analog Comparator 2
#define ADC_EMUX_EM3_EXTERNAL 0x00004000 // External (GPIO Pins)
#define ADC_EMUX_EM3_TIMER 0x00005000 // Timer
#define ADC_EMUX_EM3_PWM0 0x00006000 // PWM generator 0
#define ADC_EMUX_EM3_PWM1 0x00007000 // PWM generator 1
#define ADC_EMUX_EM3_PWM2 0x00008000 // PWM generator 2
#define ADC_EMUX_EM3_PWM3 0x00009000 // PWM generator 3
#define ADC_EMUX_EM3_NEVER 0x0000E000 // Never Trigger
#define ADC_EMUX_EM3_ALWAYS 0x0000F000 // Always (continuously sample)
#define ADC_EMUX_EM2_M 0x00000F00 // SS2 Trigger Select
#define ADC_EMUX_EM2_PROCESSOR 0x00000000 // Processor (default)
#define ADC_EMUX_EM2_COMP0 0x00000100 // Analog Comparator 0
#define ADC_EMUX_EM2_COMP1 0x00000200 // Analog Comparator 1
#define ADC_EMUX_EM2_COMP2 0x00000300 // Analog Comparator 2
#define ADC_EMUX_EM2_EXTERNAL 0x00000400 // External (GPIO Pins)
#define ADC_EMUX_EM2_TIMER 0x00000500 // Timer
#define ADC_EMUX_EM2_PWM0 0x00000600 // PWM generator 0
#define ADC_EMUX_EM2_PWM1 0x00000700 // PWM generator 1
#define ADC_EMUX_EM2_PWM2 0x00000800 // PWM generator 2
#define ADC_EMUX_EM2_PWM3 0x00000900 // PWM generator 3
#define ADC_EMUX_EM2_NEVER 0x00000E00 // Never Trigger
#define ADC_EMUX_EM2_ALWAYS 0x00000F00 // Always (continuously sample)
#define ADC_EMUX_EM1_M 0x000000F0 // SS1 Trigger Select
#define ADC_EMUX_EM1_PROCESSOR 0x00000000 // Processor (default)
#define ADC_EMUX_EM1_COMP0 0x00000010 // Analog Comparator 0
#define ADC_EMUX_EM1_COMP1 0x00000020 // Analog Comparator 1
#define ADC_EMUX_EM1_COMP2 0x00000030 // Analog Comparator 2
#define ADC_EMUX_EM1_EXTERNAL 0x00000040 // External (GPIO Pins)
#define ADC_EMUX_EM1_TIMER 0x00000050 // Timer
#define ADC_EMUX_EM1_PWM0 0x00000060 // PWM generator 0
#define ADC_EMUX_EM1_PWM1 0x00000070 // PWM generator 1
#define ADC_EMUX_EM1_PWM2 0x00000080 // PWM generator 2
#define ADC_EMUX_EM1_PWM3 0x00000090 // PWM generator 3
#define ADC_EMUX_EM1_NEVER 0x000000E0 // Never Trigger
#define ADC_EMUX_EM1_ALWAYS 0x000000F0 // Always (continuously sample)
#define ADC_EMUX_EM0_M 0x0000000F // SS0 Trigger Select
#define ADC_EMUX_EM0_PROCESSOR 0x00000000 // Processor (default)
#define ADC_EMUX_EM0_COMP0 0x00000001 // Analog Comparator 0
#define ADC_EMUX_EM0_COMP1 0x00000002 // Analog Comparator 1
#define ADC_EMUX_EM0_COMP2 0x00000003 // Analog Comparator 2
#define ADC_EMUX_EM0_EXTERNAL 0x00000004 // External (GPIO Pins)
#define ADC_EMUX_EM0_TIMER 0x00000005 // Timer
#define ADC_EMUX_EM0_PWM0 0x00000006 // PWM generator 0
#define ADC_EMUX_EM0_PWM1 0x00000007 // PWM generator 1
#define ADC_EMUX_EM0_PWM2 0x00000008 // PWM generator 2
#define ADC_EMUX_EM0_PWM3 0x00000009 // PWM generator 3
#define ADC_EMUX_EM0_NEVER 0x0000000E // Never Trigger
#define ADC_EMUX_EM0_ALWAYS 0x0000000F // Always (continuously sample)
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_USTAT register.
//
//*****************************************************************************
#define ADC_USTAT_UV3 0x00000008 // SS3 FIFO Underflow
#define ADC_USTAT_UV2 0x00000004 // SS2 FIFO Underflow
#define ADC_USTAT_UV1 0x00000002 // SS1 FIFO Underflow
#define ADC_USTAT_UV0 0x00000001 // SS0 FIFO Underflow
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_TSSEL register.
//
//*****************************************************************************
#define ADC_TSSEL_PS3_M 0x30000000 // Generator 3 PWM Module Trigger
// Select
#define ADC_TSSEL_PS3_0 0x00000000 // Use Generator 3 (and its
// trigger) in PWM module 0
#define ADC_TSSEL_PS2_M 0x00300000 // Generator 2 PWM Module Trigger
// Select
#define ADC_TSSEL_PS2_0 0x00000000 // Use Generator 2 (and its
// trigger) in PWM module 0
#define ADC_TSSEL_PS1_M 0x00003000 // Generator 1 PWM Module Trigger
// Select
#define ADC_TSSEL_PS1_0 0x00000000 // Use Generator 1 (and its
// trigger) in PWM module 0
#define ADC_TSSEL_PS0_M 0x00000030 // Generator 0 PWM Module Trigger
// Select
#define ADC_TSSEL_PS0_0 0x00000000 // Use Generator 0 (and its
// trigger) in PWM module 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSPRI register.
//
//*****************************************************************************
#define ADC_SSPRI_SS3_M 0x00003000 // SS3 Priority
#define ADC_SSPRI_SS2_M 0x00000300 // SS2 Priority
#define ADC_SSPRI_SS1_M 0x00000030 // SS1 Priority
#define ADC_SSPRI_SS0_M 0x00000003 // SS0 Priority
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SPC register.
//
//*****************************************************************************
#define ADC_SPC_PHASE_M 0x0000000F // Phase Difference
#define ADC_SPC_PHASE_0 0x00000000 // ADC sample lags by 0.0
#define ADC_SPC_PHASE_22_5 0x00000001 // ADC sample lags by 22.5
#define ADC_SPC_PHASE_45 0x00000002 // ADC sample lags by 45.0
#define ADC_SPC_PHASE_67_5 0x00000003 // ADC sample lags by 67.5
#define ADC_SPC_PHASE_90 0x00000004 // ADC sample lags by 90.0
#define ADC_SPC_PHASE_112_5 0x00000005 // ADC sample lags by 112.5
#define ADC_SPC_PHASE_135 0x00000006 // ADC sample lags by 135.0
#define ADC_SPC_PHASE_157_5 0x00000007 // ADC sample lags by 157.5
#define ADC_SPC_PHASE_180 0x00000008 // ADC sample lags by 180.0
#define ADC_SPC_PHASE_202_5 0x00000009 // ADC sample lags by 202.5
#define ADC_SPC_PHASE_225 0x0000000A // ADC sample lags by 225.0
#define ADC_SPC_PHASE_247_5 0x0000000B // ADC sample lags by 247.5
#define ADC_SPC_PHASE_270 0x0000000C // ADC sample lags by 270.0
#define ADC_SPC_PHASE_292_5 0x0000000D // ADC sample lags by 292.5
#define ADC_SPC_PHASE_315 0x0000000E // ADC sample lags by 315.0
#define ADC_SPC_PHASE_337_5 0x0000000F // ADC sample lags by 337.5
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_PSSI register.
//
//*****************************************************************************
#define ADC_PSSI_GSYNC 0x80000000 // Global Synchronize
#define ADC_PSSI_SYNCWAIT 0x08000000 // Synchronize Wait
#define ADC_PSSI_SS3 0x00000008 // SS3 Initiate
#define ADC_PSSI_SS2 0x00000004 // SS2 Initiate
#define ADC_PSSI_SS1 0x00000002 // SS1 Initiate
#define ADC_PSSI_SS0 0x00000001 // SS0 Initiate
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SAC register.
//
//*****************************************************************************
#define ADC_SAC_AVG_M 0x00000007 // Hardware Averaging Control
#define ADC_SAC_AVG_OFF 0x00000000 // No hardware oversampling
#define ADC_SAC_AVG_2X 0x00000001 // 2x hardware oversampling
#define ADC_SAC_AVG_4X 0x00000002 // 4x hardware oversampling
#define ADC_SAC_AVG_8X 0x00000003 // 8x hardware oversampling
#define ADC_SAC_AVG_16X 0x00000004 // 16x hardware oversampling
#define ADC_SAC_AVG_32X 0x00000005 // 32x hardware oversampling
#define ADC_SAC_AVG_64X 0x00000006 // 64x hardware oversampling
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_DCISC register.
//
//*****************************************************************************
#define ADC_DCISC_DCINT7 0x00000080 // Digital Comparator 7 Interrupt
// Status and Clear
#define ADC_DCISC_DCINT6 0x00000040 // Digital Comparator 6 Interrupt
// Status and Clear
#define ADC_DCISC_DCINT5 0x00000020 // Digital Comparator 5 Interrupt
// Status and Clear
#define ADC_DCISC_DCINT4 0x00000010 // Digital Comparator 4 Interrupt
// Status and Clear
#define ADC_DCISC_DCINT3 0x00000008 // Digital Comparator 3 Interrupt
// Status and Clear
#define ADC_DCISC_DCINT2 0x00000004 // Digital Comparator 2 Interrupt
// Status and Clear
#define ADC_DCISC_DCINT1 0x00000002 // Digital Comparator 1 Interrupt
// Status and Clear
#define ADC_DCISC_DCINT0 0x00000001 // Digital Comparator 0 Interrupt
// Status and Clear
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_CTL register.
//
//*****************************************************************************
#define ADC_CTL_VREF_M 0x00000001 // Voltage Reference Select
#define ADC_CTL_VREF_INTERNAL 0x00000000 // VDDA and GNDA are the voltage
// references
#define ADC_CTL_VREF_EXT_3V 0x00000001 // The external VREFA+ and VREFA-
// inputs are the voltage
// references
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSMUX0 register.
//
//*****************************************************************************
#define ADC_SSMUX0_MUX7_M 0xF0000000 // 8th Sample Input Select
#define ADC_SSMUX0_MUX6_M 0x0F000000 // 7th Sample Input Select
#define ADC_SSMUX0_MUX5_M 0x00F00000 // 6th Sample Input Select
#define ADC_SSMUX0_MUX4_M 0x000F0000 // 5th Sample Input Select
#define ADC_SSMUX0_MUX3_M 0x0000F000 // 4th Sample Input Select
#define ADC_SSMUX0_MUX2_M 0x00000F00 // 3rd Sample Input Select
#define ADC_SSMUX0_MUX1_M 0x000000F0 // 2nd Sample Input Select
#define ADC_SSMUX0_MUX0_M 0x0000000F // 1st Sample Input Select
#define ADC_SSMUX0_MUX7_S 28
#define ADC_SSMUX0_MUX6_S 24
#define ADC_SSMUX0_MUX5_S 20
#define ADC_SSMUX0_MUX4_S 16
#define ADC_SSMUX0_MUX3_S 12
#define ADC_SSMUX0_MUX2_S 8
#define ADC_SSMUX0_MUX1_S 4
#define ADC_SSMUX0_MUX0_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSCTL0 register.
//
//*****************************************************************************
#define ADC_SSCTL0_TS7 0x80000000 // 8th Sample Temp Sensor Select
#define ADC_SSCTL0_IE7 0x40000000 // 8th Sample Interrupt Enable
#define ADC_SSCTL0_END7 0x20000000 // 8th Sample is End of Sequence
#define ADC_SSCTL0_D7 0x10000000 // 8th Sample Differential Input
// Select
#define ADC_SSCTL0_TS6 0x08000000 // 7th Sample Temp Sensor Select
#define ADC_SSCTL0_IE6 0x04000000 // 7th Sample Interrupt Enable
#define ADC_SSCTL0_END6 0x02000000 // 7th Sample is End of Sequence
#define ADC_SSCTL0_D6 0x01000000 // 7th Sample Differential Input
// Select
#define ADC_SSCTL0_TS5 0x00800000 // 6th Sample Temp Sensor Select
#define ADC_SSCTL0_IE5 0x00400000 // 6th Sample Interrupt Enable
#define ADC_SSCTL0_END5 0x00200000 // 6th Sample is End of Sequence
#define ADC_SSCTL0_D5 0x00100000 // 6th Sample Differential Input
// Select
#define ADC_SSCTL0_TS4 0x00080000 // 5th Sample Temp Sensor Select
#define ADC_SSCTL0_IE4 0x00040000 // 5th Sample Interrupt Enable
#define ADC_SSCTL0_END4 0x00020000 // 5th Sample is End of Sequence
#define ADC_SSCTL0_D4 0x00010000 // 5th Sample Differential Input
// Select
#define ADC_SSCTL0_TS3 0x00008000 // 4th Sample Temp Sensor Select
#define ADC_SSCTL0_IE3 0x00004000 // 4th Sample Interrupt Enable
#define ADC_SSCTL0_END3 0x00002000 // 4th Sample is End of Sequence
#define ADC_SSCTL0_D3 0x00001000 // 4th Sample Differential Input
// Select
#define ADC_SSCTL0_TS2 0x00000800 // 3rd Sample Temp Sensor Select
#define ADC_SSCTL0_IE2 0x00000400 // 3rd Sample Interrupt Enable
#define ADC_SSCTL0_END2 0x00000200 // 3rd Sample is End of Sequence
#define ADC_SSCTL0_D2 0x00000100 // 3rd Sample Differential Input
// Select
#define ADC_SSCTL0_TS1 0x00000080 // 2nd Sample Temp Sensor Select
#define ADC_SSCTL0_IE1 0x00000040 // 2nd Sample Interrupt Enable
#define ADC_SSCTL0_END1 0x00000020 // 2nd Sample is End of Sequence
#define ADC_SSCTL0_D1 0x00000010 // 2nd Sample Differential Input
// Select
#define ADC_SSCTL0_TS0 0x00000008 // 1st Sample Temp Sensor Select
#define ADC_SSCTL0_IE0 0x00000004 // 1st Sample Interrupt Enable
#define ADC_SSCTL0_END0 0x00000002 // 1st Sample is End of Sequence
#define ADC_SSCTL0_D0 0x00000001 // 1st Sample Differential Input
// Select
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSFIFO0 register.
//
//*****************************************************************************
#define ADC_SSFIFO0_DATA_M 0x00000FFF // Conversion Result Data
#define ADC_SSFIFO0_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSFSTAT0 register.
//
//*****************************************************************************
#define ADC_SSFSTAT0_FULL 0x00001000 // FIFO Full
#define ADC_SSFSTAT0_EMPTY 0x00000100 // FIFO Empty
#define ADC_SSFSTAT0_HPTR_M 0x000000F0 // FIFO Head Pointer
#define ADC_SSFSTAT0_TPTR_M 0x0000000F // FIFO Tail Pointer
#define ADC_SSFSTAT0_HPTR_S 4
#define ADC_SSFSTAT0_TPTR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSOP0 register.
//
//*****************************************************************************
#define ADC_SSOP0_S7DCOP 0x10000000 // Sample 7 Digital Comparator
// Operation
#define ADC_SSOP0_S6DCOP 0x01000000 // Sample 6 Digital Comparator
// Operation
#define ADC_SSOP0_S5DCOP 0x00100000 // Sample 5 Digital Comparator
// Operation
#define ADC_SSOP0_S4DCOP 0x00010000 // Sample 4 Digital Comparator
// Operation
#define ADC_SSOP0_S3DCOP 0x00001000 // Sample 3 Digital Comparator
// Operation
#define ADC_SSOP0_S2DCOP 0x00000100 // Sample 2 Digital Comparator
// Operation
#define ADC_SSOP0_S1DCOP 0x00000010 // Sample 1 Digital Comparator
// Operation
#define ADC_SSOP0_S0DCOP 0x00000001 // Sample 0 Digital Comparator
// Operation
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSDC0 register.
//
//*****************************************************************************
#define ADC_SSDC0_S7DCSEL_M 0xF0000000 // Sample 7 Digital Comparator
// Select
#define ADC_SSDC0_S6DCSEL_M 0x0F000000 // Sample 6 Digital Comparator
// Select
#define ADC_SSDC0_S5DCSEL_M 0x00F00000 // Sample 5 Digital Comparator
// Select
#define ADC_SSDC0_S4DCSEL_M 0x000F0000 // Sample 4 Digital Comparator
// Select
#define ADC_SSDC0_S3DCSEL_M 0x0000F000 // Sample 3 Digital Comparator
// Select
#define ADC_SSDC0_S2DCSEL_M 0x00000F00 // Sample 2 Digital Comparator
// Select
#define ADC_SSDC0_S1DCSEL_M 0x000000F0 // Sample 1 Digital Comparator
// Select
#define ADC_SSDC0_S0DCSEL_M 0x0000000F // Sample 0 Digital Comparator
// Select
#define ADC_SSDC0_S6DCSEL_S 24
#define ADC_SSDC0_S5DCSEL_S 20
#define ADC_SSDC0_S4DCSEL_S 16
#define ADC_SSDC0_S3DCSEL_S 12
#define ADC_SSDC0_S2DCSEL_S 8
#define ADC_SSDC0_S1DCSEL_S 4
#define ADC_SSDC0_S0DCSEL_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSEMUX0 register.
//
//*****************************************************************************
#define ADC_SSEMUX0_EMUX7 0x10000000 // 8th Sample Input Select (Upper
// Bit)
#define ADC_SSEMUX0_EMUX6 0x01000000 // 7th Sample Input Select (Upper
// Bit)
#define ADC_SSEMUX0_EMUX5 0x00100000 // 6th Sample Input Select (Upper
// Bit)
#define ADC_SSEMUX0_EMUX4 0x00010000 // 5th Sample Input Select (Upper
// Bit)
#define ADC_SSEMUX0_EMUX3 0x00001000 // 4th Sample Input Select (Upper
// Bit)
#define ADC_SSEMUX0_EMUX2 0x00000100 // 3rd Sample Input Select (Upper
// Bit)
#define ADC_SSEMUX0_EMUX1 0x00000010 // 2th Sample Input Select (Upper
// Bit)
#define ADC_SSEMUX0_EMUX0 0x00000001 // 1st Sample Input Select (Upper
// Bit)
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSTSH0 register.
//
//*****************************************************************************
#define ADC_SSTSH0_TSH7_M 0xF0000000 // 8th Sample and Hold Period
// Select
#define ADC_SSTSH0_TSH6_M 0x0F000000 // 7th Sample and Hold Period
// Select
#define ADC_SSTSH0_TSH5_M 0x00F00000 // 6th Sample and Hold Period
// Select
#define ADC_SSTSH0_TSH4_M 0x000F0000 // 5th Sample and Hold Period
// Select
#define ADC_SSTSH0_TSH3_M 0x0000F000 // 4th Sample and Hold Period
// Select
#define ADC_SSTSH0_TSH2_M 0x00000F00 // 3rd Sample and Hold Period
// Select
#define ADC_SSTSH0_TSH1_M 0x000000F0 // 2nd Sample and Hold Period
// Select
#define ADC_SSTSH0_TSH0_M 0x0000000F // 1st Sample and Hold Period
// Select
#define ADC_SSTSH0_TSH7_S 28
#define ADC_SSTSH0_TSH6_S 24
#define ADC_SSTSH0_TSH5_S 20
#define ADC_SSTSH0_TSH4_S 16
#define ADC_SSTSH0_TSH3_S 12
#define ADC_SSTSH0_TSH2_S 8
#define ADC_SSTSH0_TSH1_S 4
#define ADC_SSTSH0_TSH0_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSMUX1 register.
//
//*****************************************************************************
#define ADC_SSMUX1_MUX3_M 0x0000F000 // 4th Sample Input Select
#define ADC_SSMUX1_MUX2_M 0x00000F00 // 3rd Sample Input Select
#define ADC_SSMUX1_MUX1_M 0x000000F0 // 2nd Sample Input Select
#define ADC_SSMUX1_MUX0_M 0x0000000F // 1st Sample Input Select
#define ADC_SSMUX1_MUX3_S 12
#define ADC_SSMUX1_MUX2_S 8
#define ADC_SSMUX1_MUX1_S 4
#define ADC_SSMUX1_MUX0_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSCTL1 register.
//
//*****************************************************************************
#define ADC_SSCTL1_TS3 0x00008000 // 4th Sample Temp Sensor Select
#define ADC_SSCTL1_IE3 0x00004000 // 4th Sample Interrupt Enable
#define ADC_SSCTL1_END3 0x00002000 // 4th Sample is End of Sequence
#define ADC_SSCTL1_D3 0x00001000 // 4th Sample Differential Input
// Select
#define ADC_SSCTL1_TS2 0x00000800 // 3rd Sample Temp Sensor Select
#define ADC_SSCTL1_IE2 0x00000400 // 3rd Sample Interrupt Enable
#define ADC_SSCTL1_END2 0x00000200 // 3rd Sample is End of Sequence
#define ADC_SSCTL1_D2 0x00000100 // 3rd Sample Differential Input
// Select
#define ADC_SSCTL1_TS1 0x00000080 // 2nd Sample Temp Sensor Select
#define ADC_SSCTL1_IE1 0x00000040 // 2nd Sample Interrupt Enable
#define ADC_SSCTL1_END1 0x00000020 // 2nd Sample is End of Sequence
#define ADC_SSCTL1_D1 0x00000010 // 2nd Sample Differential Input
// Select
#define ADC_SSCTL1_TS0 0x00000008 // 1st Sample Temp Sensor Select
#define ADC_SSCTL1_IE0 0x00000004 // 1st Sample Interrupt Enable
#define ADC_SSCTL1_END0 0x00000002 // 1st Sample is End of Sequence
#define ADC_SSCTL1_D0 0x00000001 // 1st Sample Differential Input
// Select
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSFIFO1 register.
//
//*****************************************************************************
#define ADC_SSFIFO1_DATA_M 0x00000FFF // Conversion Result Data
#define ADC_SSFIFO1_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSFSTAT1 register.
//
//*****************************************************************************
#define ADC_SSFSTAT1_FULL 0x00001000 // FIFO Full
#define ADC_SSFSTAT1_EMPTY 0x00000100 // FIFO Empty
#define ADC_SSFSTAT1_HPTR_M 0x000000F0 // FIFO Head Pointer
#define ADC_SSFSTAT1_TPTR_M 0x0000000F // FIFO Tail Pointer
#define ADC_SSFSTAT1_HPTR_S 4
#define ADC_SSFSTAT1_TPTR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSOP1 register.
//
//*****************************************************************************
#define ADC_SSOP1_S3DCOP 0x00001000 // Sample 3 Digital Comparator
// Operation
#define ADC_SSOP1_S2DCOP 0x00000100 // Sample 2 Digital Comparator
// Operation
#define ADC_SSOP1_S1DCOP 0x00000010 // Sample 1 Digital Comparator
// Operation
#define ADC_SSOP1_S0DCOP 0x00000001 // Sample 0 Digital Comparator
// Operation
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSDC1 register.
//
//*****************************************************************************
#define ADC_SSDC1_S3DCSEL_M 0x0000F000 // Sample 3 Digital Comparator
// Select
#define ADC_SSDC1_S2DCSEL_M 0x00000F00 // Sample 2 Digital Comparator
// Select
#define ADC_SSDC1_S1DCSEL_M 0x000000F0 // Sample 1 Digital Comparator
// Select
#define ADC_SSDC1_S0DCSEL_M 0x0000000F // Sample 0 Digital Comparator
// Select
#define ADC_SSDC1_S2DCSEL_S 8
#define ADC_SSDC1_S1DCSEL_S 4
#define ADC_SSDC1_S0DCSEL_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSEMUX1 register.
//
//*****************************************************************************
#define ADC_SSEMUX1_EMUX3 0x00001000 // 4th Sample Input Select (Upper
// Bit)
#define ADC_SSEMUX1_EMUX2 0x00000100 // 3rd Sample Input Select (Upper
// Bit)
#define ADC_SSEMUX1_EMUX1 0x00000010 // 2th Sample Input Select (Upper
// Bit)
#define ADC_SSEMUX1_EMUX0 0x00000001 // 1st Sample Input Select (Upper
// Bit)
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSTSH1 register.
//
//*****************************************************************************
#define ADC_SSTSH1_TSH3_M 0x0000F000 // 4th Sample and Hold Period
// Select
#define ADC_SSTSH1_TSH2_M 0x00000F00 // 3rd Sample and Hold Period
// Select
#define ADC_SSTSH1_TSH1_M 0x000000F0 // 2nd Sample and Hold Period
// Select
#define ADC_SSTSH1_TSH0_M 0x0000000F // 1st Sample and Hold Period
// Select
#define ADC_SSTSH1_TSH3_S 12
#define ADC_SSTSH1_TSH2_S 8
#define ADC_SSTSH1_TSH1_S 4
#define ADC_SSTSH1_TSH0_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSMUX2 register.
//
//*****************************************************************************
#define ADC_SSMUX2_MUX3_M 0x0000F000 // 4th Sample Input Select
#define ADC_SSMUX2_MUX2_M 0x00000F00 // 3rd Sample Input Select
#define ADC_SSMUX2_MUX1_M 0x000000F0 // 2nd Sample Input Select
#define ADC_SSMUX2_MUX0_M 0x0000000F // 1st Sample Input Select
#define ADC_SSMUX2_MUX3_S 12
#define ADC_SSMUX2_MUX2_S 8
#define ADC_SSMUX2_MUX1_S 4
#define ADC_SSMUX2_MUX0_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSCTL2 register.
//
//*****************************************************************************
#define ADC_SSCTL2_TS3 0x00008000 // 4th Sample Temp Sensor Select
#define ADC_SSCTL2_IE3 0x00004000 // 4th Sample Interrupt Enable
#define ADC_SSCTL2_END3 0x00002000 // 4th Sample is End of Sequence
#define ADC_SSCTL2_D3 0x00001000 // 4th Sample Differential Input
// Select
#define ADC_SSCTL2_TS2 0x00000800 // 3rd Sample Temp Sensor Select
#define ADC_SSCTL2_IE2 0x00000400 // 3rd Sample Interrupt Enable
#define ADC_SSCTL2_END2 0x00000200 // 3rd Sample is End of Sequence
#define ADC_SSCTL2_D2 0x00000100 // 3rd Sample Differential Input
// Select
#define ADC_SSCTL2_TS1 0x00000080 // 2nd Sample Temp Sensor Select
#define ADC_SSCTL2_IE1 0x00000040 // 2nd Sample Interrupt Enable
#define ADC_SSCTL2_END1 0x00000020 // 2nd Sample is End of Sequence
#define ADC_SSCTL2_D1 0x00000010 // 2nd Sample Differential Input
// Select
#define ADC_SSCTL2_TS0 0x00000008 // 1st Sample Temp Sensor Select
#define ADC_SSCTL2_IE0 0x00000004 // 1st Sample Interrupt Enable
#define ADC_SSCTL2_END0 0x00000002 // 1st Sample is End of Sequence
#define ADC_SSCTL2_D0 0x00000001 // 1st Sample Differential Input
// Select
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSFIFO2 register.
//
//*****************************************************************************
#define ADC_SSFIFO2_DATA_M 0x00000FFF // Conversion Result Data
#define ADC_SSFIFO2_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSFSTAT2 register.
//
//*****************************************************************************
#define ADC_SSFSTAT2_FULL 0x00001000 // FIFO Full
#define ADC_SSFSTAT2_EMPTY 0x00000100 // FIFO Empty
#define ADC_SSFSTAT2_HPTR_M 0x000000F0 // FIFO Head Pointer
#define ADC_SSFSTAT2_TPTR_M 0x0000000F // FIFO Tail Pointer
#define ADC_SSFSTAT2_HPTR_S 4
#define ADC_SSFSTAT2_TPTR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSOP2 register.
//
//*****************************************************************************
#define ADC_SSOP2_S3DCOP 0x00001000 // Sample 3 Digital Comparator
// Operation
#define ADC_SSOP2_S2DCOP 0x00000100 // Sample 2 Digital Comparator
// Operation
#define ADC_SSOP2_S1DCOP 0x00000010 // Sample 1 Digital Comparator
// Operation
#define ADC_SSOP2_S0DCOP 0x00000001 // Sample 0 Digital Comparator
// Operation
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSDC2 register.
//
//*****************************************************************************
#define ADC_SSDC2_S3DCSEL_M 0x0000F000 // Sample 3 Digital Comparator
// Select
#define ADC_SSDC2_S2DCSEL_M 0x00000F00 // Sample 2 Digital Comparator
// Select
#define ADC_SSDC2_S1DCSEL_M 0x000000F0 // Sample 1 Digital Comparator
// Select
#define ADC_SSDC2_S0DCSEL_M 0x0000000F // Sample 0 Digital Comparator
// Select
#define ADC_SSDC2_S2DCSEL_S 8
#define ADC_SSDC2_S1DCSEL_S 4
#define ADC_SSDC2_S0DCSEL_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSEMUX2 register.
//
//*****************************************************************************
#define ADC_SSEMUX2_EMUX3 0x00001000 // 4th Sample Input Select (Upper
// Bit)
#define ADC_SSEMUX2_EMUX2 0x00000100 // 3rd Sample Input Select (Upper
// Bit)
#define ADC_SSEMUX2_EMUX1 0x00000010 // 2th Sample Input Select (Upper
// Bit)
#define ADC_SSEMUX2_EMUX0 0x00000001 // 1st Sample Input Select (Upper
// Bit)
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSTSH2 register.
//
//*****************************************************************************
#define ADC_SSTSH2_TSH3_M 0x0000F000 // 4th Sample and Hold Period
// Select
#define ADC_SSTSH2_TSH2_M 0x00000F00 // 3rd Sample and Hold Period
// Select
#define ADC_SSTSH2_TSH1_M 0x000000F0 // 2nd Sample and Hold Period
// Select
#define ADC_SSTSH2_TSH0_M 0x0000000F // 1st Sample and Hold Period
// Select
#define ADC_SSTSH2_TSH3_S 12
#define ADC_SSTSH2_TSH2_S 8
#define ADC_SSTSH2_TSH1_S 4
#define ADC_SSTSH2_TSH0_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSMUX3 register.
//
//*****************************************************************************
#define ADC_SSMUX3_MUX0_M 0x0000000F // 1st Sample Input Select
#define ADC_SSMUX3_MUX0_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSCTL3 register.
//
//*****************************************************************************
#define ADC_SSCTL3_TS0 0x00000008 // 1st Sample Temp Sensor Select
#define ADC_SSCTL3_IE0 0x00000004 // Sample Interrupt Enable
#define ADC_SSCTL3_END0 0x00000002 // End of Sequence
#define ADC_SSCTL3_D0 0x00000001 // Sample Differential Input Select
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSFIFO3 register.
//
//*****************************************************************************
#define ADC_SSFIFO3_DATA_M 0x00000FFF // Conversion Result Data
#define ADC_SSFIFO3_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSFSTAT3 register.
//
//*****************************************************************************
#define ADC_SSFSTAT3_FULL 0x00001000 // FIFO Full
#define ADC_SSFSTAT3_EMPTY 0x00000100 // FIFO Empty
#define ADC_SSFSTAT3_HPTR_M 0x000000F0 // FIFO Head Pointer
#define ADC_SSFSTAT3_TPTR_M 0x0000000F // FIFO Tail Pointer
#define ADC_SSFSTAT3_HPTR_S 4
#define ADC_SSFSTAT3_TPTR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSOP3 register.
//
//*****************************************************************************
#define ADC_SSOP3_S0DCOP 0x00000001 // Sample 0 Digital Comparator
// Operation
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSDC3 register.
//
//*****************************************************************************
#define ADC_SSDC3_S0DCSEL_M 0x0000000F // Sample 0 Digital Comparator
// Select
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSEMUX3 register.
//
//*****************************************************************************
#define ADC_SSEMUX3_EMUX0 0x00000001 // 1st Sample Input Select (Upper
// Bit)
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSTSH3 register.
//
//*****************************************************************************
#define ADC_SSTSH3_TSH0_M 0x0000000F // 1st Sample and Hold Period
// Select
#define ADC_SSTSH3_TSH0_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_DCRIC register.
//
//*****************************************************************************
#define ADC_DCRIC_DCTRIG7 0x00800000 // Digital Comparator Trigger 7
#define ADC_DCRIC_DCTRIG6 0x00400000 // Digital Comparator Trigger 6
#define ADC_DCRIC_DCTRIG5 0x00200000 // Digital Comparator Trigger 5
#define ADC_DCRIC_DCTRIG4 0x00100000 // Digital Comparator Trigger 4
#define ADC_DCRIC_DCTRIG3 0x00080000 // Digital Comparator Trigger 3
#define ADC_DCRIC_DCTRIG2 0x00040000 // Digital Comparator Trigger 2
#define ADC_DCRIC_DCTRIG1 0x00020000 // Digital Comparator Trigger 1
#define ADC_DCRIC_DCTRIG0 0x00010000 // Digital Comparator Trigger 0
#define ADC_DCRIC_DCINT7 0x00000080 // Digital Comparator Interrupt 7
#define ADC_DCRIC_DCINT6 0x00000040 // Digital Comparator Interrupt 6
#define ADC_DCRIC_DCINT5 0x00000020 // Digital Comparator Interrupt 5
#define ADC_DCRIC_DCINT4 0x00000010 // Digital Comparator Interrupt 4
#define ADC_DCRIC_DCINT3 0x00000008 // Digital Comparator Interrupt 3
#define ADC_DCRIC_DCINT2 0x00000004 // Digital Comparator Interrupt 2
#define ADC_DCRIC_DCINT1 0x00000002 // Digital Comparator Interrupt 1
#define ADC_DCRIC_DCINT0 0x00000001 // Digital Comparator Interrupt 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_DCCTL0 register.
//
//*****************************************************************************
#define ADC_DCCTL0_CTE 0x00001000 // Comparison Trigger Enable
#define ADC_DCCTL0_CTC_M 0x00000C00 // Comparison Trigger Condition
#define ADC_DCCTL0_CTC_LOW 0x00000000 // Low Band
#define ADC_DCCTL0_CTC_MID 0x00000400 // Mid Band
#define ADC_DCCTL0_CTC_HIGH 0x00000C00 // High Band
#define ADC_DCCTL0_CTM_M 0x00000300 // Comparison Trigger Mode
#define ADC_DCCTL0_CTM_ALWAYS 0x00000000 // Always
#define ADC_DCCTL0_CTM_ONCE 0x00000100 // Once
#define ADC_DCCTL0_CTM_HALWAYS 0x00000200 // Hysteresis Always
#define ADC_DCCTL0_CTM_HONCE 0x00000300 // Hysteresis Once
#define ADC_DCCTL0_CIE 0x00000010 // Comparison Interrupt Enable
#define ADC_DCCTL0_CIC_M 0x0000000C // Comparison Interrupt Condition
#define ADC_DCCTL0_CIC_LOW 0x00000000 // Low Band
#define ADC_DCCTL0_CIC_MID 0x00000004 // Mid Band
#define ADC_DCCTL0_CIC_HIGH 0x0000000C // High Band
#define ADC_DCCTL0_CIM_M 0x00000003 // Comparison Interrupt Mode
#define ADC_DCCTL0_CIM_ALWAYS 0x00000000 // Always
#define ADC_DCCTL0_CIM_ONCE 0x00000001 // Once
#define ADC_DCCTL0_CIM_HALWAYS 0x00000002 // Hysteresis Always
#define ADC_DCCTL0_CIM_HONCE 0x00000003 // Hysteresis Once
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_DCCTL1 register.
//
//*****************************************************************************
#define ADC_DCCTL1_CTE 0x00001000 // Comparison Trigger Enable
#define ADC_DCCTL1_CTC_M 0x00000C00 // Comparison Trigger Condition
#define ADC_DCCTL1_CTC_LOW 0x00000000 // Low Band
#define ADC_DCCTL1_CTC_MID 0x00000400 // Mid Band
#define ADC_DCCTL1_CTC_HIGH 0x00000C00 // High Band
#define ADC_DCCTL1_CTM_M 0x00000300 // Comparison Trigger Mode
#define ADC_DCCTL1_CTM_ALWAYS 0x00000000 // Always
#define ADC_DCCTL1_CTM_ONCE 0x00000100 // Once
#define ADC_DCCTL1_CTM_HALWAYS 0x00000200 // Hysteresis Always
#define ADC_DCCTL1_CTM_HONCE 0x00000300 // Hysteresis Once
#define ADC_DCCTL1_CIE 0x00000010 // Comparison Interrupt Enable
#define ADC_DCCTL1_CIC_M 0x0000000C // Comparison Interrupt Condition
#define ADC_DCCTL1_CIC_LOW 0x00000000 // Low Band
#define ADC_DCCTL1_CIC_MID 0x00000004 // Mid Band
#define ADC_DCCTL1_CIC_HIGH 0x0000000C // High Band
#define ADC_DCCTL1_CIM_M 0x00000003 // Comparison Interrupt Mode
#define ADC_DCCTL1_CIM_ALWAYS 0x00000000 // Always
#define ADC_DCCTL1_CIM_ONCE 0x00000001 // Once
#define ADC_DCCTL1_CIM_HALWAYS 0x00000002 // Hysteresis Always
#define ADC_DCCTL1_CIM_HONCE 0x00000003 // Hysteresis Once
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_DCCTL2 register.
//
//*****************************************************************************
#define ADC_DCCTL2_CTE 0x00001000 // Comparison Trigger Enable
#define ADC_DCCTL2_CTC_M 0x00000C00 // Comparison Trigger Condition
#define ADC_DCCTL2_CTC_LOW 0x00000000 // Low Band
#define ADC_DCCTL2_CTC_MID 0x00000400 // Mid Band
#define ADC_DCCTL2_CTC_HIGH 0x00000C00 // High Band
#define ADC_DCCTL2_CTM_M 0x00000300 // Comparison Trigger Mode
#define ADC_DCCTL2_CTM_ALWAYS 0x00000000 // Always
#define ADC_DCCTL2_CTM_ONCE 0x00000100 // Once
#define ADC_DCCTL2_CTM_HALWAYS 0x00000200 // Hysteresis Always
#define ADC_DCCTL2_CTM_HONCE 0x00000300 // Hysteresis Once
#define ADC_DCCTL2_CIE 0x00000010 // Comparison Interrupt Enable
#define ADC_DCCTL2_CIC_M 0x0000000C // Comparison Interrupt Condition
#define ADC_DCCTL2_CIC_LOW 0x00000000 // Low Band
#define ADC_DCCTL2_CIC_MID 0x00000004 // Mid Band
#define ADC_DCCTL2_CIC_HIGH 0x0000000C // High Band
#define ADC_DCCTL2_CIM_M 0x00000003 // Comparison Interrupt Mode
#define ADC_DCCTL2_CIM_ALWAYS 0x00000000 // Always
#define ADC_DCCTL2_CIM_ONCE 0x00000001 // Once
#define ADC_DCCTL2_CIM_HALWAYS 0x00000002 // Hysteresis Always
#define ADC_DCCTL2_CIM_HONCE 0x00000003 // Hysteresis Once
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_DCCTL3 register.
//
//*****************************************************************************
#define ADC_DCCTL3_CTE 0x00001000 // Comparison Trigger Enable
#define ADC_DCCTL3_CTC_M 0x00000C00 // Comparison Trigger Condition
#define ADC_DCCTL3_CTC_LOW 0x00000000 // Low Band
#define ADC_DCCTL3_CTC_MID 0x00000400 // Mid Band
#define ADC_DCCTL3_CTC_HIGH 0x00000C00 // High Band
#define ADC_DCCTL3_CTM_M 0x00000300 // Comparison Trigger Mode
#define ADC_DCCTL3_CTM_ALWAYS 0x00000000 // Always
#define ADC_DCCTL3_CTM_ONCE 0x00000100 // Once
#define ADC_DCCTL3_CTM_HALWAYS 0x00000200 // Hysteresis Always
#define ADC_DCCTL3_CTM_HONCE 0x00000300 // Hysteresis Once
#define ADC_DCCTL3_CIE 0x00000010 // Comparison Interrupt Enable
#define ADC_DCCTL3_CIC_M 0x0000000C // Comparison Interrupt Condition
#define ADC_DCCTL3_CIC_LOW 0x00000000 // Low Band
#define ADC_DCCTL3_CIC_MID 0x00000004 // Mid Band
#define ADC_DCCTL3_CIC_HIGH 0x0000000C // High Band
#define ADC_DCCTL3_CIM_M 0x00000003 // Comparison Interrupt Mode
#define ADC_DCCTL3_CIM_ALWAYS 0x00000000 // Always
#define ADC_DCCTL3_CIM_ONCE 0x00000001 // Once
#define ADC_DCCTL3_CIM_HALWAYS 0x00000002 // Hysteresis Always
#define ADC_DCCTL3_CIM_HONCE 0x00000003 // Hysteresis Once
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_DCCTL4 register.
//
//*****************************************************************************
#define ADC_DCCTL4_CTE 0x00001000 // Comparison Trigger Enable
#define ADC_DCCTL4_CTC_M 0x00000C00 // Comparison Trigger Condition
#define ADC_DCCTL4_CTC_LOW 0x00000000 // Low Band
#define ADC_DCCTL4_CTC_MID 0x00000400 // Mid Band
#define ADC_DCCTL4_CTC_HIGH 0x00000C00 // High Band
#define ADC_DCCTL4_CTM_M 0x00000300 // Comparison Trigger Mode
#define ADC_DCCTL4_CTM_ALWAYS 0x00000000 // Always
#define ADC_DCCTL4_CTM_ONCE 0x00000100 // Once
#define ADC_DCCTL4_CTM_HALWAYS 0x00000200 // Hysteresis Always
#define ADC_DCCTL4_CTM_HONCE 0x00000300 // Hysteresis Once
#define ADC_DCCTL4_CIE 0x00000010 // Comparison Interrupt Enable
#define ADC_DCCTL4_CIC_M 0x0000000C // Comparison Interrupt Condition
#define ADC_DCCTL4_CIC_LOW 0x00000000 // Low Band
#define ADC_DCCTL4_CIC_MID 0x00000004 // Mid Band
#define ADC_DCCTL4_CIC_HIGH 0x0000000C // High Band
#define ADC_DCCTL4_CIM_M 0x00000003 // Comparison Interrupt Mode
#define ADC_DCCTL4_CIM_ALWAYS 0x00000000 // Always
#define ADC_DCCTL4_CIM_ONCE 0x00000001 // Once
#define ADC_DCCTL4_CIM_HALWAYS 0x00000002 // Hysteresis Always
#define ADC_DCCTL4_CIM_HONCE 0x00000003 // Hysteresis Once
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_DCCTL5 register.
//
//*****************************************************************************
#define ADC_DCCTL5_CTE 0x00001000 // Comparison Trigger Enable
#define ADC_DCCTL5_CTC_M 0x00000C00 // Comparison Trigger Condition
#define ADC_DCCTL5_CTC_LOW 0x00000000 // Low Band
#define ADC_DCCTL5_CTC_MID 0x00000400 // Mid Band
#define ADC_DCCTL5_CTC_HIGH 0x00000C00 // High Band
#define ADC_DCCTL5_CTM_M 0x00000300 // Comparison Trigger Mode
#define ADC_DCCTL5_CTM_ALWAYS 0x00000000 // Always
#define ADC_DCCTL5_CTM_ONCE 0x00000100 // Once
#define ADC_DCCTL5_CTM_HALWAYS 0x00000200 // Hysteresis Always
#define ADC_DCCTL5_CTM_HONCE 0x00000300 // Hysteresis Once
#define ADC_DCCTL5_CIE 0x00000010 // Comparison Interrupt Enable
#define ADC_DCCTL5_CIC_M 0x0000000C // Comparison Interrupt Condition
#define ADC_DCCTL5_CIC_LOW 0x00000000 // Low Band
#define ADC_DCCTL5_CIC_MID 0x00000004 // Mid Band
#define ADC_DCCTL5_CIC_HIGH 0x0000000C // High Band
#define ADC_DCCTL5_CIM_M 0x00000003 // Comparison Interrupt Mode
#define ADC_DCCTL5_CIM_ALWAYS 0x00000000 // Always
#define ADC_DCCTL5_CIM_ONCE 0x00000001 // Once
#define ADC_DCCTL5_CIM_HALWAYS 0x00000002 // Hysteresis Always
#define ADC_DCCTL5_CIM_HONCE 0x00000003 // Hysteresis Once
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_DCCTL6 register.
//
//*****************************************************************************
#define ADC_DCCTL6_CTE 0x00001000 // Comparison Trigger Enable
#define ADC_DCCTL6_CTC_M 0x00000C00 // Comparison Trigger Condition
#define ADC_DCCTL6_CTC_LOW 0x00000000 // Low Band
#define ADC_DCCTL6_CTC_MID 0x00000400 // Mid Band
#define ADC_DCCTL6_CTC_HIGH 0x00000C00 // High Band
#define ADC_DCCTL6_CTM_M 0x00000300 // Comparison Trigger Mode
#define ADC_DCCTL6_CTM_ALWAYS 0x00000000 // Always
#define ADC_DCCTL6_CTM_ONCE 0x00000100 // Once
#define ADC_DCCTL6_CTM_HALWAYS 0x00000200 // Hysteresis Always
#define ADC_DCCTL6_CTM_HONCE 0x00000300 // Hysteresis Once
#define ADC_DCCTL6_CIE 0x00000010 // Comparison Interrupt Enable
#define ADC_DCCTL6_CIC_M 0x0000000C // Comparison Interrupt Condition
#define ADC_DCCTL6_CIC_LOW 0x00000000 // Low Band
#define ADC_DCCTL6_CIC_MID 0x00000004 // Mid Band
#define ADC_DCCTL6_CIC_HIGH 0x0000000C // High Band
#define ADC_DCCTL6_CIM_M 0x00000003 // Comparison Interrupt Mode
#define ADC_DCCTL6_CIM_ALWAYS 0x00000000 // Always
#define ADC_DCCTL6_CIM_ONCE 0x00000001 // Once
#define ADC_DCCTL6_CIM_HALWAYS 0x00000002 // Hysteresis Always
#define ADC_DCCTL6_CIM_HONCE 0x00000003 // Hysteresis Once
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_DCCTL7 register.
//
//*****************************************************************************
#define ADC_DCCTL7_CTE 0x00001000 // Comparison Trigger Enable
#define ADC_DCCTL7_CTC_M 0x00000C00 // Comparison Trigger Condition
#define ADC_DCCTL7_CTC_LOW 0x00000000 // Low Band
#define ADC_DCCTL7_CTC_MID 0x00000400 // Mid Band
#define ADC_DCCTL7_CTC_HIGH 0x00000C00 // High Band
#define ADC_DCCTL7_CTM_M 0x00000300 // Comparison Trigger Mode
#define ADC_DCCTL7_CTM_ALWAYS 0x00000000 // Always
#define ADC_DCCTL7_CTM_ONCE 0x00000100 // Once
#define ADC_DCCTL7_CTM_HALWAYS 0x00000200 // Hysteresis Always
#define ADC_DCCTL7_CTM_HONCE 0x00000300 // Hysteresis Once
#define ADC_DCCTL7_CIE 0x00000010 // Comparison Interrupt Enable
#define ADC_DCCTL7_CIC_M 0x0000000C // Comparison Interrupt Condition
#define ADC_DCCTL7_CIC_LOW 0x00000000 // Low Band
#define ADC_DCCTL7_CIC_MID 0x00000004 // Mid Band
#define ADC_DCCTL7_CIC_HIGH 0x0000000C // High Band
#define ADC_DCCTL7_CIM_M 0x00000003 // Comparison Interrupt Mode
#define ADC_DCCTL7_CIM_ALWAYS 0x00000000 // Always
#define ADC_DCCTL7_CIM_ONCE 0x00000001 // Once
#define ADC_DCCTL7_CIM_HALWAYS 0x00000002 // Hysteresis Always
#define ADC_DCCTL7_CIM_HONCE 0x00000003 // Hysteresis Once
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_DCCMP0 register.
//
//*****************************************************************************
#define ADC_DCCMP0_COMP1_M 0x0FFF0000 // Compare 1
#define ADC_DCCMP0_COMP0_M 0x00000FFF // Compare 0
#define ADC_DCCMP0_COMP1_S 16
#define ADC_DCCMP0_COMP0_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_DCCMP1 register.
//
//*****************************************************************************
#define ADC_DCCMP1_COMP1_M 0x0FFF0000 // Compare 1
#define ADC_DCCMP1_COMP0_M 0x00000FFF // Compare 0
#define ADC_DCCMP1_COMP1_S 16
#define ADC_DCCMP1_COMP0_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_DCCMP2 register.
//
//*****************************************************************************
#define ADC_DCCMP2_COMP1_M 0x0FFF0000 // Compare 1
#define ADC_DCCMP2_COMP0_M 0x00000FFF // Compare 0
#define ADC_DCCMP2_COMP1_S 16
#define ADC_DCCMP2_COMP0_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_DCCMP3 register.
//
//*****************************************************************************
#define ADC_DCCMP3_COMP1_M 0x0FFF0000 // Compare 1
#define ADC_DCCMP3_COMP0_M 0x00000FFF // Compare 0
#define ADC_DCCMP3_COMP1_S 16
#define ADC_DCCMP3_COMP0_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_DCCMP4 register.
//
//*****************************************************************************
#define ADC_DCCMP4_COMP1_M 0x0FFF0000 // Compare 1
#define ADC_DCCMP4_COMP0_M 0x00000FFF // Compare 0
#define ADC_DCCMP4_COMP1_S 16
#define ADC_DCCMP4_COMP0_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_DCCMP5 register.
//
//*****************************************************************************
#define ADC_DCCMP5_COMP1_M 0x0FFF0000 // Compare 1
#define ADC_DCCMP5_COMP0_M 0x00000FFF // Compare 0
#define ADC_DCCMP5_COMP1_S 16
#define ADC_DCCMP5_COMP0_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_DCCMP6 register.
//
//*****************************************************************************
#define ADC_DCCMP6_COMP1_M 0x0FFF0000 // Compare 1
#define ADC_DCCMP6_COMP0_M 0x00000FFF // Compare 0
#define ADC_DCCMP6_COMP1_S 16
#define ADC_DCCMP6_COMP0_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_DCCMP7 register.
//
//*****************************************************************************
#define ADC_DCCMP7_COMP1_M 0x0FFF0000 // Compare 1
#define ADC_DCCMP7_COMP0_M 0x00000FFF // Compare 0
#define ADC_DCCMP7_COMP1_S 16
#define ADC_DCCMP7_COMP0_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_PP register.
//
//*****************************************************************************
#define ADC_PP_APSHT 0x01000000 // Application-Programmable
// Sample-and-Hold Time
#define ADC_PP_TS 0x00800000 // Temperature Sensor
#define ADC_PP_RSL_M 0x007C0000 // Resolution
#define ADC_PP_TYPE_M 0x00030000 // ADC Architecture
#define ADC_PP_TYPE_SAR 0x00000000 // SAR
#define ADC_PP_DC_M 0x0000FC00 // Digital Comparator Count
#define ADC_PP_CH_M 0x000003F0 // ADC Channel Count
#define ADC_PP_MCR_M 0x0000000F // Maximum Conversion Rate
#define ADC_PP_MCR_FULL 0x00000007 // Full conversion rate (FCONV) as
// defined by TADC and NSH
#define ADC_PP_RSL_S 18
#define ADC_PP_DC_S 10
#define ADC_PP_CH_S 4
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_PC register.
//
//*****************************************************************************
#define ADC_PC_MCR_M 0x0000000F // Conversion Rate
#define ADC_PC_MCR_1_8 0x00000001 // Eighth conversion rate. After a
// conversion completes, the logic
// pauses for 112 TADC periods
// before starting the next
// conversion
#define ADC_PC_MCR_1_4 0x00000003 // Quarter conversion rate. After a
// conversion completes, the logic
// pauses for 48 TADC periods
// before starting the next
// conversion
#define ADC_PC_MCR_1_2 0x00000005 // Half conversion rate. After a
// conversion completes, the logic
// pauses for 16 TADC periods
// before starting the next
// conversion
#define ADC_PC_MCR_FULL 0x00000007 // Full conversion rate (FCONV) as
// defined by TADC and NSH
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_CC register.
//
//*****************************************************************************
#define ADC_CC_CLKDIV_M 0x000003F0 // PLL VCO Clock Divisor
#define ADC_CC_CS_M 0x0000000F // ADC Clock Source
#define ADC_CC_CS_SYSPLL 0x00000000 // PLL VCO divided by CLKDIV
#define ADC_CC_CS_PIOSC 0x00000001 // PIOSC
#define ADC_CC_CS_MOSC 0x00000002 // MOSC
#define ADC_CC_CLKDIV_S 4
//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_ACMIS register.
//
//*****************************************************************************
#define COMP_ACMIS_IN2 0x00000004 // Comparator 2 Masked Interrupt
// Status
#define COMP_ACMIS_IN1 0x00000002 // Comparator 1 Masked Interrupt
// Status
#define COMP_ACMIS_IN0 0x00000001 // Comparator 0 Masked Interrupt
// Status
//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_ACRIS register.
//
//*****************************************************************************
#define COMP_ACRIS_IN2 0x00000004 // Comparator 2 Interrupt Status
#define COMP_ACRIS_IN1 0x00000002 // Comparator 1 Interrupt Status
#define COMP_ACRIS_IN0 0x00000001 // Comparator 0 Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_ACINTEN register.
//
//*****************************************************************************
#define COMP_ACINTEN_IN2 0x00000004 // Comparator 2 Interrupt Enable
#define COMP_ACINTEN_IN1 0x00000002 // Comparator 1 Interrupt Enable
#define COMP_ACINTEN_IN0 0x00000001 // Comparator 0 Interrupt Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_ACREFCTL
// register.
//
//*****************************************************************************
#define COMP_ACREFCTL_EN 0x00000200 // Resistor Ladder Enable
#define COMP_ACREFCTL_RNG 0x00000100 // Resistor Ladder Range
#define COMP_ACREFCTL_VREF_M 0x0000000F // Resistor Ladder Voltage Ref
#define COMP_ACREFCTL_VREF_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_ACSTAT0 register.
//
//*****************************************************************************
#define COMP_ACSTAT0_OVAL 0x00000002 // Comparator Output Value
//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_ACCTL0 register.
//
//*****************************************************************************
#define COMP_ACCTL0_TOEN 0x00000800 // Trigger Output Enable
#define COMP_ACCTL0_ASRCP_M 0x00000600 // Analog Source Positive
#define COMP_ACCTL0_ASRCP_PIN 0x00000000 // Pin value of Cn+
#define COMP_ACCTL0_ASRCP_PIN0 0x00000200 // Pin value of C0+
#define COMP_ACCTL0_ASRCP_REF 0x00000400 // Internal voltage reference
#define COMP_ACCTL0_TSLVAL 0x00000080 // Trigger Sense Level Value
#define COMP_ACCTL0_TSEN_M 0x00000060 // Trigger Sense
#define COMP_ACCTL0_TSEN_LEVEL 0x00000000 // Level sense, see TSLVAL
#define COMP_ACCTL0_TSEN_FALL 0x00000020 // Falling edge
#define COMP_ACCTL0_TSEN_RISE 0x00000040 // Rising edge
#define COMP_ACCTL0_TSEN_BOTH 0x00000060 // Either edge
#define COMP_ACCTL0_ISLVAL 0x00000010 // Interrupt Sense Level Value
#define COMP_ACCTL0_ISEN_M 0x0000000C // Interrupt Sense
#define COMP_ACCTL0_ISEN_LEVEL 0x00000000 // Level sense, see ISLVAL
#define COMP_ACCTL0_ISEN_FALL 0x00000004 // Falling edge
#define COMP_ACCTL0_ISEN_RISE 0x00000008 // Rising edge
#define COMP_ACCTL0_ISEN_BOTH 0x0000000C // Either edge
#define COMP_ACCTL0_CINV 0x00000002 // Comparator Output Invert
//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_ACSTAT1 register.
//
//*****************************************************************************
#define COMP_ACSTAT1_OVAL 0x00000002 // Comparator Output Value
//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_ACCTL1 register.
//
//*****************************************************************************
#define COMP_ACCTL1_TOEN 0x00000800 // Trigger Output Enable
#define COMP_ACCTL1_ASRCP_M 0x00000600 // Analog Source Positive
#define COMP_ACCTL1_ASRCP_PIN 0x00000000 // Pin value of Cn+
#define COMP_ACCTL1_ASRCP_PIN0 0x00000200 // Pin value of C0+
#define COMP_ACCTL1_ASRCP_REF 0x00000400 // Internal voltage reference
#define COMP_ACCTL1_TSLVAL 0x00000080 // Trigger Sense Level Value
#define COMP_ACCTL1_TSEN_M 0x00000060 // Trigger Sense
#define COMP_ACCTL1_TSEN_LEVEL 0x00000000 // Level sense, see TSLVAL
#define COMP_ACCTL1_TSEN_FALL 0x00000020 // Falling edge
#define COMP_ACCTL1_TSEN_RISE 0x00000040 // Rising edge
#define COMP_ACCTL1_TSEN_BOTH 0x00000060 // Either edge
#define COMP_ACCTL1_ISLVAL 0x00000010 // Interrupt Sense Level Value
#define COMP_ACCTL1_ISEN_M 0x0000000C // Interrupt Sense
#define COMP_ACCTL1_ISEN_LEVEL 0x00000000 // Level sense, see ISLVAL
#define COMP_ACCTL1_ISEN_FALL 0x00000004 // Falling edge
#define COMP_ACCTL1_ISEN_RISE 0x00000008 // Rising edge
#define COMP_ACCTL1_ISEN_BOTH 0x0000000C // Either edge
#define COMP_ACCTL1_CINV 0x00000002 // Comparator Output Invert
//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_ACSTAT2 register.
//
//*****************************************************************************
#define COMP_ACSTAT2_OVAL 0x00000002 // Comparator Output Value
//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_ACCTL2 register.
//
//*****************************************************************************
#define COMP_ACCTL2_TOEN 0x00000800 // Trigger Output Enable
#define COMP_ACCTL2_ASRCP_M 0x00000600 // Analog Source Positive
#define COMP_ACCTL2_ASRCP_PIN 0x00000000 // Pin value of Cn+
#define COMP_ACCTL2_ASRCP_PIN0 0x00000200 // Pin value of C0+
#define COMP_ACCTL2_ASRCP_REF 0x00000400 // Internal voltage reference
#define COMP_ACCTL2_TSLVAL 0x00000080 // Trigger Sense Level Value
#define COMP_ACCTL2_TSEN_M 0x00000060 // Trigger Sense
#define COMP_ACCTL2_TSEN_LEVEL 0x00000000 // Level sense, see TSLVAL
#define COMP_ACCTL2_TSEN_FALL 0x00000020 // Falling edge
#define COMP_ACCTL2_TSEN_RISE 0x00000040 // Rising edge
#define COMP_ACCTL2_TSEN_BOTH 0x00000060 // Either edge
#define COMP_ACCTL2_ISLVAL 0x00000010 // Interrupt Sense Level Value
#define COMP_ACCTL2_ISEN_M 0x0000000C // Interrupt Sense
#define COMP_ACCTL2_ISEN_LEVEL 0x00000000 // Level sense, see ISLVAL
#define COMP_ACCTL2_ISEN_FALL 0x00000004 // Falling edge
#define COMP_ACCTL2_ISEN_RISE 0x00000008 // Rising edge
#define COMP_ACCTL2_ISEN_BOTH 0x0000000C // Either edge
#define COMP_ACCTL2_CINV 0x00000002 // Comparator Output Invert
//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_PP register.
//
//*****************************************************************************
#define COMP_PP_C2O 0x00040000 // Comparator Output 2 Present
#define COMP_PP_C1O 0x00020000 // Comparator Output 1 Present
#define COMP_PP_C0O 0x00010000 // Comparator Output 0 Present
#define COMP_PP_CMP2 0x00000004 // Comparator 2 Present
#define COMP_PP_CMP1 0x00000002 // Comparator 1 Present
#define COMP_PP_CMP0 0x00000001 // Comparator 0 Present
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_CTL register.
//
//*****************************************************************************
#define CAN_CTL_TEST 0x00000080 // Test Mode Enable
#define CAN_CTL_CCE 0x00000040 // Configuration Change Enable
#define CAN_CTL_DAR 0x00000020 // Disable Automatic-Retransmission
#define CAN_CTL_EIE 0x00000008 // Error Interrupt Enable
#define CAN_CTL_SIE 0x00000004 // Status Interrupt Enable
#define CAN_CTL_IE 0x00000002 // CAN Interrupt Enable
#define CAN_CTL_INIT 0x00000001 // Initialization
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_STS register.
//
//*****************************************************************************
#define CAN_STS_BOFF 0x00000080 // Bus-Off Status
#define CAN_STS_EWARN 0x00000040 // Warning Status
#define CAN_STS_EPASS 0x00000020 // Error Passive
#define CAN_STS_RXOK 0x00000010 // Received a Message Successfully
#define CAN_STS_TXOK 0x00000008 // Transmitted a Message
// Successfully
#define CAN_STS_LEC_M 0x00000007 // Last Error Code
#define CAN_STS_LEC_NONE 0x00000000 // No Error
#define CAN_STS_LEC_STUFF 0x00000001 // Stuff Error
#define CAN_STS_LEC_FORM 0x00000002 // Format Error
#define CAN_STS_LEC_ACK 0x00000003 // ACK Error
#define CAN_STS_LEC_BIT1 0x00000004 // Bit 1 Error
#define CAN_STS_LEC_BIT0 0x00000005 // Bit 0 Error
#define CAN_STS_LEC_CRC 0x00000006 // CRC Error
#define CAN_STS_LEC_NOEVENT 0x00000007 // No Event
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_ERR register.
//
//*****************************************************************************
#define CAN_ERR_RP 0x00008000 // Received Error Passive
#define CAN_ERR_REC_M 0x00007F00 // Receive Error Counter
#define CAN_ERR_TEC_M 0x000000FF // Transmit Error Counter
#define CAN_ERR_REC_S 8
#define CAN_ERR_TEC_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_BIT register.
//
//*****************************************************************************
#define CAN_BIT_TSEG2_M 0x00007000 // Time Segment after Sample Point
#define CAN_BIT_TSEG1_M 0x00000F00 // Time Segment Before Sample Point
#define CAN_BIT_SJW_M 0x000000C0 // (Re)Synchronization Jump Width
#define CAN_BIT_BRP_M 0x0000003F // Baud Rate Prescaler
#define CAN_BIT_TSEG2_S 12
#define CAN_BIT_TSEG1_S 8
#define CAN_BIT_SJW_S 6
#define CAN_BIT_BRP_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_INT register.
//
//*****************************************************************************
#define CAN_INT_INTID_M 0x0000FFFF // Interrupt Identifier
#define CAN_INT_INTID_NONE 0x00000000 // No interrupt pending
#define CAN_INT_INTID_STATUS 0x00008000 // Status Interrupt
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_TST register.
//
//*****************************************************************************
#define CAN_TST_RX 0x00000080 // Receive Observation
#define CAN_TST_TX_M 0x00000060 // Transmit Control
#define CAN_TST_TX_CANCTL 0x00000000 // CAN Module Control
#define CAN_TST_TX_SAMPLE 0x00000020 // Sample Point
#define CAN_TST_TX_DOMINANT 0x00000040 // Driven Low
#define CAN_TST_TX_RECESSIVE 0x00000060 // Driven High
#define CAN_TST_LBACK 0x00000010 // Loopback Mode
#define CAN_TST_SILENT 0x00000008 // Silent Mode
#define CAN_TST_BASIC 0x00000004 // Basic Mode
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_BRPE register.
//
//*****************************************************************************
#define CAN_BRPE_BRPE_M 0x0000000F // Baud Rate Prescaler Extension
#define CAN_BRPE_BRPE_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1CRQ register.
//
//*****************************************************************************
#define CAN_IF1CRQ_BUSY 0x00008000 // Busy Flag
#define CAN_IF1CRQ_MNUM_M 0x0000003F // Message Number
#define CAN_IF1CRQ_MNUM_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1CMSK register.
//
//*****************************************************************************
#define CAN_IF1CMSK_WRNRD 0x00000080 // Write, Not Read
#define CAN_IF1CMSK_MASK 0x00000040 // Access Mask Bits
#define CAN_IF1CMSK_ARB 0x00000020 // Access Arbitration Bits
#define CAN_IF1CMSK_CONTROL 0x00000010 // Access Control Bits
#define CAN_IF1CMSK_CLRINTPND 0x00000008 // Clear Interrupt Pending Bit
#define CAN_IF1CMSK_NEWDAT 0x00000004 // Access New Data
#define CAN_IF1CMSK_TXRQST 0x00000004 // Access Transmission Request
#define CAN_IF1CMSK_DATAA 0x00000002 // Access Data Byte 0 to 3
#define CAN_IF1CMSK_DATAB 0x00000001 // Access Data Byte 4 to 7
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1MSK1 register.
//
//*****************************************************************************
#define CAN_IF1MSK1_IDMSK_M 0x0000FFFF // Identifier Mask
#define CAN_IF1MSK1_IDMSK_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1MSK2 register.
//
//*****************************************************************************
#define CAN_IF1MSK2_MXTD 0x00008000 // Mask Extended Identifier
#define CAN_IF1MSK2_MDIR 0x00004000 // Mask Message Direction
#define CAN_IF1MSK2_IDMSK_M 0x00001FFF // Identifier Mask
#define CAN_IF1MSK2_IDMSK_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1ARB1 register.
//
//*****************************************************************************
#define CAN_IF1ARB1_ID_M 0x0000FFFF // Message Identifier
#define CAN_IF1ARB1_ID_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1ARB2 register.
//
//*****************************************************************************
#define CAN_IF1ARB2_MSGVAL 0x00008000 // Message Valid
#define CAN_IF1ARB2_XTD 0x00004000 // Extended Identifier
#define CAN_IF1ARB2_DIR 0x00002000 // Message Direction
#define CAN_IF1ARB2_ID_M 0x00001FFF // Message Identifier
#define CAN_IF1ARB2_ID_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1MCTL register.
//
//*****************************************************************************
#define CAN_IF1MCTL_NEWDAT 0x00008000 // New Data
#define CAN_IF1MCTL_MSGLST 0x00004000 // Message Lost
#define CAN_IF1MCTL_INTPND 0x00002000 // Interrupt Pending
#define CAN_IF1MCTL_UMASK 0x00001000 // Use Acceptance Mask
#define CAN_IF1MCTL_TXIE 0x00000800 // Transmit Interrupt Enable
#define CAN_IF1MCTL_RXIE 0x00000400 // Receive Interrupt Enable
#define CAN_IF1MCTL_RMTEN 0x00000200 // Remote Enable
#define CAN_IF1MCTL_TXRQST 0x00000100 // Transmit Request
#define CAN_IF1MCTL_EOB 0x00000080 // End of Buffer
#define CAN_IF1MCTL_DLC_M 0x0000000F // Data Length Code
#define CAN_IF1MCTL_DLC_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1DA1 register.
//
//*****************************************************************************
#define CAN_IF1DA1_DATA_M 0x0000FFFF // Data
#define CAN_IF1DA1_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1DA2 register.
//
//*****************************************************************************
#define CAN_IF1DA2_DATA_M 0x0000FFFF // Data
#define CAN_IF1DA2_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1DB1 register.
//
//*****************************************************************************
#define CAN_IF1DB1_DATA_M 0x0000FFFF // Data
#define CAN_IF1DB1_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1DB2 register.
//
//*****************************************************************************
#define CAN_IF1DB2_DATA_M 0x0000FFFF // Data
#define CAN_IF1DB2_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2CRQ register.
//
//*****************************************************************************
#define CAN_IF2CRQ_BUSY 0x00008000 // Busy Flag
#define CAN_IF2CRQ_MNUM_M 0x0000003F // Message Number
#define CAN_IF2CRQ_MNUM_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2CMSK register.
//
//*****************************************************************************
#define CAN_IF2CMSK_WRNRD 0x00000080 // Write, Not Read
#define CAN_IF2CMSK_MASK 0x00000040 // Access Mask Bits
#define CAN_IF2CMSK_ARB 0x00000020 // Access Arbitration Bits
#define CAN_IF2CMSK_CONTROL 0x00000010 // Access Control Bits
#define CAN_IF2CMSK_CLRINTPND 0x00000008 // Clear Interrupt Pending Bit
#define CAN_IF2CMSK_NEWDAT 0x00000004 // Access New Data
#define CAN_IF2CMSK_TXRQST 0x00000004 // Access Transmission Request
#define CAN_IF2CMSK_DATAA 0x00000002 // Access Data Byte 0 to 3
#define CAN_IF2CMSK_DATAB 0x00000001 // Access Data Byte 4 to 7
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2MSK1 register.
//
//*****************************************************************************
#define CAN_IF2MSK1_IDMSK_M 0x0000FFFF // Identifier Mask
#define CAN_IF2MSK1_IDMSK_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2MSK2 register.
//
//*****************************************************************************
#define CAN_IF2MSK2_MXTD 0x00008000 // Mask Extended Identifier
#define CAN_IF2MSK2_MDIR 0x00004000 // Mask Message Direction
#define CAN_IF2MSK2_IDMSK_M 0x00001FFF // Identifier Mask
#define CAN_IF2MSK2_IDMSK_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2ARB1 register.
//
//*****************************************************************************
#define CAN_IF2ARB1_ID_M 0x0000FFFF // Message Identifier
#define CAN_IF2ARB1_ID_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2ARB2 register.
//
//*****************************************************************************
#define CAN_IF2ARB2_MSGVAL 0x00008000 // Message Valid
#define CAN_IF2ARB2_XTD 0x00004000 // Extended Identifier
#define CAN_IF2ARB2_DIR 0x00002000 // Message Direction
#define CAN_IF2ARB2_ID_M 0x00001FFF // Message Identifier
#define CAN_IF2ARB2_ID_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2MCTL register.
//
//*****************************************************************************
#define CAN_IF2MCTL_NEWDAT 0x00008000 // New Data
#define CAN_IF2MCTL_MSGLST 0x00004000 // Message Lost
#define CAN_IF2MCTL_INTPND 0x00002000 // Interrupt Pending
#define CAN_IF2MCTL_UMASK 0x00001000 // Use Acceptance Mask
#define CAN_IF2MCTL_TXIE 0x00000800 // Transmit Interrupt Enable
#define CAN_IF2MCTL_RXIE 0x00000400 // Receive Interrupt Enable
#define CAN_IF2MCTL_RMTEN 0x00000200 // Remote Enable
#define CAN_IF2MCTL_TXRQST 0x00000100 // Transmit Request
#define CAN_IF2MCTL_EOB 0x00000080 // End of Buffer
#define CAN_IF2MCTL_DLC_M 0x0000000F // Data Length Code
#define CAN_IF2MCTL_DLC_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2DA1 register.
//
//*****************************************************************************
#define CAN_IF2DA1_DATA_M 0x0000FFFF // Data
#define CAN_IF2DA1_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2DA2 register.
//
//*****************************************************************************
#define CAN_IF2DA2_DATA_M 0x0000FFFF // Data
#define CAN_IF2DA2_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2DB1 register.
//
//*****************************************************************************
#define CAN_IF2DB1_DATA_M 0x0000FFFF // Data
#define CAN_IF2DB1_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2DB2 register.
//
//*****************************************************************************
#define CAN_IF2DB2_DATA_M 0x0000FFFF // Data
#define CAN_IF2DB2_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_TXRQ1 register.
//
//*****************************************************************************
#define CAN_TXRQ1_TXRQST_M 0x0000FFFF // Transmission Request Bits
#define CAN_TXRQ1_TXRQST_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_TXRQ2 register.
//
//*****************************************************************************
#define CAN_TXRQ2_TXRQST_M 0x0000FFFF // Transmission Request Bits
#define CAN_TXRQ2_TXRQST_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_NWDA1 register.
//
//*****************************************************************************
#define CAN_NWDA1_NEWDAT_M 0x0000FFFF // New Data Bits
#define CAN_NWDA1_NEWDAT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_NWDA2 register.
//
//*****************************************************************************
#define CAN_NWDA2_NEWDAT_M 0x0000FFFF // New Data Bits
#define CAN_NWDA2_NEWDAT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_MSG1INT register.
//
//*****************************************************************************
#define CAN_MSG1INT_INTPND_M 0x0000FFFF // Interrupt Pending Bits
#define CAN_MSG1INT_INTPND_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_MSG2INT register.
//
//*****************************************************************************
#define CAN_MSG2INT_INTPND_M 0x0000FFFF // Interrupt Pending Bits
#define CAN_MSG2INT_INTPND_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_MSG1VAL register.
//
//*****************************************************************************
#define CAN_MSG1VAL_MSGVAL_M 0x0000FFFF // Message Valid Bits
#define CAN_MSG1VAL_MSGVAL_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_MSG2VAL register.
//
//*****************************************************************************
#define CAN_MSG2VAL_MSGVAL_M 0x0000FFFF // Message Valid Bits
#define CAN_MSG2VAL_MSGVAL_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_FADDR register.
//
//*****************************************************************************
#define USB_FADDR_M 0x0000007F // Function Address
#define USB_FADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_POWER register.
//
//*****************************************************************************
#define USB_POWER_ISOUP 0x00000080 // Isochronous Update
#define USB_POWER_SOFTCONN 0x00000040 // Soft Connect/Disconnect
#define USB_POWER_HSENAB 0x00000020 // High Speed Enable
#define USB_POWER_HSMODE 0x00000010 // High Speed Enable
#define USB_POWER_RESET 0x00000008 // RESET Signaling
#define USB_POWER_RESUME 0x00000004 // RESUME Signaling
#define USB_POWER_SUSPEND 0x00000002 // SUSPEND Mode
#define USB_POWER_PWRDNPHY 0x00000001 // Power Down PHY
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXIS register.
//
//*****************************************************************************
#define USB_TXIS_EP7 0x00000080 // TX Endpoint 7 Interrupt
#define USB_TXIS_EP6 0x00000040 // TX Endpoint 6 Interrupt
#define USB_TXIS_EP5 0x00000020 // TX Endpoint 5 Interrupt
#define USB_TXIS_EP4 0x00000010 // TX Endpoint 4 Interrupt
#define USB_TXIS_EP3 0x00000008 // TX Endpoint 3 Interrupt
#define USB_TXIS_EP2 0x00000004 // TX Endpoint 2 Interrupt
#define USB_TXIS_EP1 0x00000002 // TX Endpoint 1 Interrupt
#define USB_TXIS_EP0 0x00000001 // TX and RX Endpoint 0 Interrupt
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXIS register.
//
//*****************************************************************************
#define USB_RXIS_EP7 0x00000080 // RX Endpoint 7 Interrupt
#define USB_RXIS_EP6 0x00000040 // RX Endpoint 6 Interrupt
#define USB_RXIS_EP5 0x00000020 // RX Endpoint 5 Interrupt
#define USB_RXIS_EP4 0x00000010 // RX Endpoint 4 Interrupt
#define USB_RXIS_EP3 0x00000008 // RX Endpoint 3 Interrupt
#define USB_RXIS_EP2 0x00000004 // RX Endpoint 2 Interrupt
#define USB_RXIS_EP1 0x00000002 // RX Endpoint 1 Interrupt
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXIE register.
//
//*****************************************************************************
#define USB_TXIE_EP7 0x00000080 // TX Endpoint 7 Interrupt Enable
#define USB_TXIE_EP6 0x00000040 // TX Endpoint 6 Interrupt Enable
#define USB_TXIE_EP5 0x00000020 // TX Endpoint 5 Interrupt Enable
#define USB_TXIE_EP4 0x00000010 // TX Endpoint 4 Interrupt Enable
#define USB_TXIE_EP3 0x00000008 // TX Endpoint 3 Interrupt Enable
#define USB_TXIE_EP2 0x00000004 // TX Endpoint 2 Interrupt Enable
#define USB_TXIE_EP1 0x00000002 // TX Endpoint 1 Interrupt Enable
#define USB_TXIE_EP0 0x00000001 // TX and RX Endpoint 0 Interrupt
// Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXIE register.
//
//*****************************************************************************
#define USB_RXIE_EP7 0x00000080 // RX Endpoint 7 Interrupt Enable
#define USB_RXIE_EP6 0x00000040 // RX Endpoint 6 Interrupt Enable
#define USB_RXIE_EP5 0x00000020 // RX Endpoint 5 Interrupt Enable
#define USB_RXIE_EP4 0x00000010 // RX Endpoint 4 Interrupt Enable
#define USB_RXIE_EP3 0x00000008 // RX Endpoint 3 Interrupt Enable
#define USB_RXIE_EP2 0x00000004 // RX Endpoint 2 Interrupt Enable
#define USB_RXIE_EP1 0x00000002 // RX Endpoint 1 Interrupt Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_IS register.
//
//*****************************************************************************
#define USB_IS_VBUSERR 0x00000080 // VBUS Error (OTG only)
#define USB_IS_SESREQ 0x00000040 // SESSION REQUEST (OTG only)
#define USB_IS_DISCON 0x00000020 // Session Disconnect (OTG only)
#define USB_IS_CONN 0x00000010 // Session Connect
#define USB_IS_SOF 0x00000008 // Start of Frame
#define USB_IS_BABBLE 0x00000004 // Babble Detected
#define USB_IS_RESET 0x00000004 // RESET Signaling Detected
#define USB_IS_RESUME 0x00000002 // RESUME Signaling Detected
#define USB_IS_SUSPEND 0x00000001 // SUSPEND Signaling Detected
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_IE register.
//
//*****************************************************************************
#define USB_IE_VBUSERR 0x00000080 // Enable VBUS Error Interrupt (OTG
// only)
#define USB_IE_SESREQ 0x00000040 // Enable Session Request (OTG
// only)
#define USB_IE_DISCON 0x00000020 // Enable Disconnect Interrupt
#define USB_IE_CONN 0x00000010 // Enable Connect Interrupt
#define USB_IE_SOF 0x00000008 // Enable Start-of-Frame Interrupt
#define USB_IE_BABBLE 0x00000004 // Enable Babble Interrupt
#define USB_IE_RESET 0x00000004 // Enable RESET Interrupt
#define USB_IE_RESUME 0x00000002 // Enable RESUME Interrupt
#define USB_IE_SUSPND 0x00000001 // Enable SUSPEND Interrupt
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_FRAME register.
//
//*****************************************************************************
#define USB_FRAME_M 0x000007FF // Frame Number
#define USB_FRAME_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_EPIDX register.
//
//*****************************************************************************
#define USB_EPIDX_EPIDX_M 0x0000000F // Endpoint Index
#define USB_EPIDX_EPIDX_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TEST register.
//
//*****************************************************************************
#define USB_TEST_FORCEH 0x00000080 // Force Host Mode
#define USB_TEST_FIFOACC 0x00000040 // FIFO Access
#define USB_TEST_FORCEFS 0x00000020 // Force Full-Speed Mode
#define USB_TEST_FORCEHS 0x00000010 // Force High-Speed Mode
#define USB_TEST_TESTPKT 0x00000008 // Test Packet Mode Enable
#define USB_TEST_TESTK 0x00000004 // Test_K Mode Enable
#define USB_TEST_TESTJ 0x00000002 // Test_J Mode Enable
#define USB_TEST_TESTSE0NAK 0x00000001 // Test_SE0_NAK Test Mode Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_FIFO0 register.
//
//*****************************************************************************
#define USB_FIFO0_EPDATA_M 0xFFFFFFFF // Endpoint Data
#define USB_FIFO0_EPDATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_FIFO1 register.
//
//*****************************************************************************
#define USB_FIFO1_EPDATA_M 0xFFFFFFFF // Endpoint Data
#define USB_FIFO1_EPDATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_FIFO2 register.
//
//*****************************************************************************
#define USB_FIFO2_EPDATA_M 0xFFFFFFFF // Endpoint Data
#define USB_FIFO2_EPDATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_FIFO3 register.
//
//*****************************************************************************
#define USB_FIFO3_EPDATA_M 0xFFFFFFFF // Endpoint Data
#define USB_FIFO3_EPDATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_FIFO4 register.
//
//*****************************************************************************
#define USB_FIFO4_EPDATA_M 0xFFFFFFFF // Endpoint Data
#define USB_FIFO4_EPDATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_FIFO5 register.
//
//*****************************************************************************
#define USB_FIFO5_EPDATA_M 0xFFFFFFFF // Endpoint Data
#define USB_FIFO5_EPDATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_FIFO6 register.
//
//*****************************************************************************
#define USB_FIFO6_EPDATA_M 0xFFFFFFFF // Endpoint Data
#define USB_FIFO6_EPDATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_FIFO7 register.
//
//*****************************************************************************
#define USB_FIFO7_EPDATA_M 0xFFFFFFFF // Endpoint Data
#define USB_FIFO7_EPDATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_DEVCTL register.
//
//*****************************************************************************
#define USB_DEVCTL_DEV 0x00000080 // Device Mode (OTG only)
#define USB_DEVCTL_FSDEV 0x00000040 // Full-Speed Device Detected
#define USB_DEVCTL_LSDEV 0x00000020 // Low-Speed Device Detected
#define USB_DEVCTL_VBUS_M 0x00000018 // VBUS Level (OTG only)
#define USB_DEVCTL_VBUS_NONE 0x00000000 // Below SessionEnd
#define USB_DEVCTL_VBUS_SEND 0x00000008 // Above SessionEnd, below AValid
#define USB_DEVCTL_VBUS_AVALID 0x00000010 // Above AValid, below VBUSValid
#define USB_DEVCTL_VBUS_VALID 0x00000018 // Above VBUSValid
#define USB_DEVCTL_HOST 0x00000004 // Host Mode
#define USB_DEVCTL_HOSTREQ 0x00000002 // Host Request (OTG only)
#define USB_DEVCTL_SESSION 0x00000001 // Session Start/End (OTG only)
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_CCONF register.
//
//*****************************************************************************
#define USB_CCONF_TXEDMA 0x00000002 // TX Early DMA Enable
#define USB_CCONF_RXEDMA 0x00000001 // TX Early DMA Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXFIFOSZ register.
//
//*****************************************************************************
#define USB_TXFIFOSZ_DPB 0x00000010 // Double Packet Buffer Support
#define USB_TXFIFOSZ_SIZE_M 0x0000000F // Max Packet Size
#define USB_TXFIFOSZ_SIZE_8 0x00000000 // 8
#define USB_TXFIFOSZ_SIZE_16 0x00000001 // 16
#define USB_TXFIFOSZ_SIZE_32 0x00000002 // 32
#define USB_TXFIFOSZ_SIZE_64 0x00000003 // 64
#define USB_TXFIFOSZ_SIZE_128 0x00000004 // 128
#define USB_TXFIFOSZ_SIZE_256 0x00000005 // 256
#define USB_TXFIFOSZ_SIZE_512 0x00000006 // 512
#define USB_TXFIFOSZ_SIZE_1024 0x00000007 // 1024
#define USB_TXFIFOSZ_SIZE_2048 0x00000008 // 2048
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXFIFOSZ register.
//
//*****************************************************************************
#define USB_RXFIFOSZ_DPB 0x00000010 // Double Packet Buffer Support
#define USB_RXFIFOSZ_SIZE_M 0x0000000F // Max Packet Size
#define USB_RXFIFOSZ_SIZE_8 0x00000000 // 8
#define USB_RXFIFOSZ_SIZE_16 0x00000001 // 16
#define USB_RXFIFOSZ_SIZE_32 0x00000002 // 32
#define USB_RXFIFOSZ_SIZE_64 0x00000003 // 64
#define USB_RXFIFOSZ_SIZE_128 0x00000004 // 128
#define USB_RXFIFOSZ_SIZE_256 0x00000005 // 256
#define USB_RXFIFOSZ_SIZE_512 0x00000006 // 512
#define USB_RXFIFOSZ_SIZE_1024 0x00000007 // 1024
#define USB_RXFIFOSZ_SIZE_2048 0x00000008 // 2048
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXFIFOADD
// register.
//
//*****************************************************************************
#define USB_TXFIFOADD_ADDR_M 0x000001FF // Transmit/Receive Start Address
#define USB_TXFIFOADD_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXFIFOADD
// register.
//
//*****************************************************************************
#define USB_RXFIFOADD_ADDR_M 0x000001FF // Transmit/Receive Start Address
#define USB_RXFIFOADD_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_ULPIVBUSCTL
// register.
//
//*****************************************************************************
#define USB_ULPIVBUSCTL_USEEXTVBUSIND \
0x00000002 // Use External VBUS Indicator
#define USB_ULPIVBUSCTL_USEEXTVBUS \
0x00000001 // Use External VBUS
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_ULPIREGDATA
// register.
//
//*****************************************************************************
#define USB_ULPIREGDATA_REGDATA_M \
0x000000FF // Register Data
#define USB_ULPIREGDATA_REGDATA_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_ULPIREGADDR
// register.
//
//*****************************************************************************
#define USB_ULPIREGADDR_ADDR_M 0x000000FF // Register Address
#define USB_ULPIREGADDR_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_ULPIREGCTL
// register.
//
//*****************************************************************************
#define USB_ULPIREGCTL_RDWR 0x00000004 // Read/Write Control
#define USB_ULPIREGCTL_REGCMPLT 0x00000002 // Register Access Complete
#define USB_ULPIREGCTL_REGACC 0x00000001 // Initiate Register Access
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_EPINFO register.
//
//*****************************************************************************
#define USB_EPINFO_RXEP_M 0x000000F0 // RX Endpoints
#define USB_EPINFO_TXEP_M 0x0000000F // TX Endpoints
#define USB_EPINFO_RXEP_S 4
#define USB_EPINFO_TXEP_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RAMINFO register.
//
//*****************************************************************************
#define USB_RAMINFO_DMACHAN_M 0x000000F0 // DMA Channels
#define USB_RAMINFO_RAMBITS_M 0x0000000F // RAM Address Bus Width
#define USB_RAMINFO_DMACHAN_S 4
#define USB_RAMINFO_RAMBITS_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_CONTIM register.
//
//*****************************************************************************
#define USB_CONTIM_WTCON_M 0x000000F0 // Connect Wait
#define USB_CONTIM_WTID_M 0x0000000F // Wait ID
#define USB_CONTIM_WTCON_S 4
#define USB_CONTIM_WTID_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_VPLEN register.
//
//*****************************************************************************
#define USB_VPLEN_VPLEN_M 0x000000FF // VBUS Pulse Length
#define USB_VPLEN_VPLEN_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_HSEOF register.
//
//*****************************************************************************
#define USB_HSEOF_HSEOFG_M 0x000000FF // HIgh-Speed End-of-Frame Gap
#define USB_HSEOF_HSEOFG_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_FSEOF register.
//
//*****************************************************************************
#define USB_FSEOF_FSEOFG_M 0x000000FF // Full-Speed End-of-Frame Gap
#define USB_FSEOF_FSEOFG_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_LSEOF register.
//
//*****************************************************************************
#define USB_LSEOF_LSEOFG_M 0x000000FF // Low-Speed End-of-Frame Gap
#define USB_LSEOF_LSEOFG_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXFUNCADDR0
// register.
//
//*****************************************************************************
#define USB_TXFUNCADDR0_ADDR_M 0x0000007F // Device Address
#define USB_TXFUNCADDR0_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXHUBADDR0
// register.
//
//*****************************************************************************
#define USB_TXHUBADDR0_ADDR_M 0x0000007F // Hub Address
#define USB_TXHUBADDR0_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXHUBPORT0
// register.
//
//*****************************************************************************
#define USB_TXHUBPORT0_PORT_M 0x0000007F // Hub Port
#define USB_TXHUBPORT0_PORT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXFUNCADDR1
// register.
//
//*****************************************************************************
#define USB_TXFUNCADDR1_ADDR_M 0x0000007F // Device Address
#define USB_TXFUNCADDR1_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXHUBADDR1
// register.
//
//*****************************************************************************
#define USB_TXHUBADDR1_ADDR_M 0x0000007F // Hub Address
#define USB_TXHUBADDR1_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXHUBPORT1
// register.
//
//*****************************************************************************
#define USB_TXHUBPORT1_PORT_M 0x0000007F // Hub Port
#define USB_TXHUBPORT1_PORT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXFUNCADDR1
// register.
//
//*****************************************************************************
#define USB_RXFUNCADDR1_ADDR_M 0x0000007F // Device Address
#define USB_RXFUNCADDR1_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXHUBADDR1
// register.
//
//*****************************************************************************
#define USB_RXHUBADDR1_ADDR_M 0x0000007F // Hub Address
#define USB_RXHUBADDR1_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXHUBPORT1
// register.
//
//*****************************************************************************
#define USB_RXHUBPORT1_PORT_M 0x0000007F // Hub Port
#define USB_RXHUBPORT1_PORT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXFUNCADDR2
// register.
//
//*****************************************************************************
#define USB_TXFUNCADDR2_ADDR_M 0x0000007F // Device Address
#define USB_TXFUNCADDR2_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXHUBADDR2
// register.
//
//*****************************************************************************
#define USB_TXHUBADDR2_ADDR_M 0x0000007F // Hub Address
#define USB_TXHUBADDR2_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXHUBPORT2
// register.
//
//*****************************************************************************
#define USB_TXHUBPORT2_PORT_M 0x0000007F // Hub Port
#define USB_TXHUBPORT2_PORT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXFUNCADDR2
// register.
//
//*****************************************************************************
#define USB_RXFUNCADDR2_ADDR_M 0x0000007F // Device Address
#define USB_RXFUNCADDR2_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXHUBADDR2
// register.
//
//*****************************************************************************
#define USB_RXHUBADDR2_ADDR_M 0x0000007F // Hub Address
#define USB_RXHUBADDR2_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXHUBPORT2
// register.
//
//*****************************************************************************
#define USB_RXHUBPORT2_PORT_M 0x0000007F // Hub Port
#define USB_RXHUBPORT2_PORT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXFUNCADDR3
// register.
//
//*****************************************************************************
#define USB_TXFUNCADDR3_ADDR_M 0x0000007F // Device Address
#define USB_TXFUNCADDR3_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXHUBADDR3
// register.
//
//*****************************************************************************
#define USB_TXHUBADDR3_ADDR_M 0x0000007F // Hub Address
#define USB_TXHUBADDR3_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXHUBPORT3
// register.
//
//*****************************************************************************
#define USB_TXHUBPORT3_PORT_M 0x0000007F // Hub Port
#define USB_TXHUBPORT3_PORT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXFUNCADDR3
// register.
//
//*****************************************************************************
#define USB_RXFUNCADDR3_ADDR_M 0x0000007F // Device Address
#define USB_RXFUNCADDR3_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXHUBADDR3
// register.
//
//*****************************************************************************
#define USB_RXHUBADDR3_ADDR_M 0x0000007F // Hub Address
#define USB_RXHUBADDR3_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXHUBPORT3
// register.
//
//*****************************************************************************
#define USB_RXHUBPORT3_PORT_M 0x0000007F // Hub Port
#define USB_RXHUBPORT3_PORT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXFUNCADDR4
// register.
//
//*****************************************************************************
#define USB_TXFUNCADDR4_ADDR_M 0x0000007F // Device Address
#define USB_TXFUNCADDR4_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXHUBADDR4
// register.
//
//*****************************************************************************
#define USB_TXHUBADDR4_ADDR_M 0x0000007F // Hub Address
#define USB_TXHUBADDR4_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXHUBPORT4
// register.
//
//*****************************************************************************
#define USB_TXHUBPORT4_PORT_M 0x0000007F // Hub Port
#define USB_TXHUBPORT4_PORT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXFUNCADDR4
// register.
//
//*****************************************************************************
#define USB_RXFUNCADDR4_ADDR_M 0x0000007F // Device Address
#define USB_RXFUNCADDR4_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXHUBADDR4
// register.
//
//*****************************************************************************
#define USB_RXHUBADDR4_ADDR_M 0x0000007F // Hub Address
#define USB_RXHUBADDR4_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXHUBPORT4
// register.
//
//*****************************************************************************
#define USB_RXHUBPORT4_PORT_M 0x0000007F // Hub Port
#define USB_RXHUBPORT4_PORT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXFUNCADDR5
// register.
//
//*****************************************************************************
#define USB_TXFUNCADDR5_ADDR_M 0x0000007F // Device Address
#define USB_TXFUNCADDR5_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXHUBADDR5
// register.
//
//*****************************************************************************
#define USB_TXHUBADDR5_ADDR_M 0x0000007F // Hub Address
#define USB_TXHUBADDR5_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXHUBPORT5
// register.
//
//*****************************************************************************
#define USB_TXHUBPORT5_PORT_M 0x0000007F // Hub Port
#define USB_TXHUBPORT5_PORT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXFUNCADDR5
// register.
//
//*****************************************************************************
#define USB_RXFUNCADDR5_ADDR_M 0x0000007F // Device Address
#define USB_RXFUNCADDR5_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXHUBADDR5
// register.
//
//*****************************************************************************
#define USB_RXHUBADDR5_ADDR_M 0x0000007F // Hub Address
#define USB_RXHUBADDR5_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXHUBPORT5
// register.
//
//*****************************************************************************
#define USB_RXHUBPORT5_PORT_M 0x0000007F // Hub Port
#define USB_RXHUBPORT5_PORT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXFUNCADDR6
// register.
//
//*****************************************************************************
#define USB_TXFUNCADDR6_ADDR_M 0x0000007F // Device Address
#define USB_TXFUNCADDR6_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXHUBADDR6
// register.
//
//*****************************************************************************
#define USB_TXHUBADDR6_ADDR_M 0x0000007F // Hub Address
#define USB_TXHUBADDR6_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXHUBPORT6
// register.
//
//*****************************************************************************
#define USB_TXHUBPORT6_PORT_M 0x0000007F // Hub Port
#define USB_TXHUBPORT6_PORT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXFUNCADDR6
// register.
//
//*****************************************************************************
#define USB_RXFUNCADDR6_ADDR_M 0x0000007F // Device Address
#define USB_RXFUNCADDR6_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXHUBADDR6
// register.
//
//*****************************************************************************
#define USB_RXHUBADDR6_ADDR_M 0x0000007F // Hub Address
#define USB_RXHUBADDR6_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXHUBPORT6
// register.
//
//*****************************************************************************
#define USB_RXHUBPORT6_PORT_M 0x0000007F // Hub Port
#define USB_RXHUBPORT6_PORT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXFUNCADDR7
// register.
//
//*****************************************************************************
#define USB_TXFUNCADDR7_ADDR_M 0x0000007F // Device Address
#define USB_TXFUNCADDR7_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXHUBADDR7
// register.
//
//*****************************************************************************
#define USB_TXHUBADDR7_ADDR_M 0x0000007F // Hub Address
#define USB_TXHUBADDR7_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXHUBPORT7
// register.
//
//*****************************************************************************
#define USB_TXHUBPORT7_PORT_M 0x0000007F // Hub Port
#define USB_TXHUBPORT7_PORT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXFUNCADDR7
// register.
//
//*****************************************************************************
#define USB_RXFUNCADDR7_ADDR_M 0x0000007F // Device Address
#define USB_RXFUNCADDR7_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXHUBADDR7
// register.
//
//*****************************************************************************
#define USB_RXHUBADDR7_ADDR_M 0x0000007F // Hub Address
#define USB_RXHUBADDR7_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXHUBPORT7
// register.
//
//*****************************************************************************
#define USB_RXHUBPORT7_PORT_M 0x0000007F // Hub Port
#define USB_RXHUBPORT7_PORT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_CSRL0 register.
//
//*****************************************************************************
#define USB_CSRL0_NAKTO 0x00000080 // NAK Timeout
#define USB_CSRL0_SETENDC 0x00000080 // Setup End Clear
#define USB_CSRL0_STATUS 0x00000040 // STATUS Packet
#define USB_CSRL0_RXRDYC 0x00000040 // RXRDY Clear
#define USB_CSRL0_REQPKT 0x00000020 // Request Packet
#define USB_CSRL0_STALL 0x00000020 // Send Stall
#define USB_CSRL0_SETEND 0x00000010 // Setup End
#define USB_CSRL0_ERROR 0x00000010 // Error
#define USB_CSRL0_DATAEND 0x00000008 // Data End
#define USB_CSRL0_SETUP 0x00000008 // Setup Packet
#define USB_CSRL0_STALLED 0x00000004 // Endpoint Stalled
#define USB_CSRL0_TXRDY 0x00000002 // Transmit Packet Ready
#define USB_CSRL0_RXRDY 0x00000001 // Receive Packet Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_CSRH0 register.
//
//*****************************************************************************
#define USB_CSRH0_DISPING 0x00000008 // PING Disable
#define USB_CSRH0_DTWE 0x00000004 // Data Toggle Write Enable
#define USB_CSRH0_DT 0x00000002 // Data Toggle
#define USB_CSRH0_FLUSH 0x00000001 // Flush FIFO
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_COUNT0 register.
//
//*****************************************************************************
#define USB_COUNT0_COUNT_M 0x0000007F // FIFO Count
#define USB_COUNT0_COUNT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TYPE0 register.
//
//*****************************************************************************
#define USB_TYPE0_SPEED_M 0x000000C0 // Operating Speed
#define USB_TYPE0_SPEED_HIGH 0x00000040 // High
#define USB_TYPE0_SPEED_FULL 0x00000080 // Full
#define USB_TYPE0_SPEED_LOW 0x000000C0 // Low
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_NAKLMT register.
//
//*****************************************************************************
#define USB_NAKLMT_NAKLMT_M 0x0000001F // EP0 NAK Limit
#define USB_NAKLMT_NAKLMT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXMAXP1 register.
//
//*****************************************************************************
#define USB_TXMAXP1_MAXLOAD_M 0x000007FF // Maximum Payload
#define USB_TXMAXP1_MAXLOAD_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXCSRL1 register.
//
//*****************************************************************************
#define USB_TXCSRL1_NAKTO 0x00000080 // NAK Timeout
#define USB_TXCSRL1_CLRDT 0x00000040 // Clear Data Toggle
#define USB_TXCSRL1_STALLED 0x00000020 // Endpoint Stalled
#define USB_TXCSRL1_STALL 0x00000010 // Send STALL
#define USB_TXCSRL1_SETUP 0x00000010 // Setup Packet
#define USB_TXCSRL1_FLUSH 0x00000008 // Flush FIFO
#define USB_TXCSRL1_ERROR 0x00000004 // Error
#define USB_TXCSRL1_UNDRN 0x00000004 // Underrun
#define USB_TXCSRL1_FIFONE 0x00000002 // FIFO Not Empty
#define USB_TXCSRL1_TXRDY 0x00000001 // Transmit Packet Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXCSRH1 register.
//
//*****************************************************************************
#define USB_TXCSRH1_AUTOSET 0x00000080 // Auto Set
#define USB_TXCSRH1_ISO 0x00000040 // Isochronous Transfers
#define USB_TXCSRH1_MODE 0x00000020 // Mode
#define USB_TXCSRH1_DMAEN 0x00000010 // DMA Request Enable
#define USB_TXCSRH1_FDT 0x00000008 // Force Data Toggle
#define USB_TXCSRH1_DMAMOD 0x00000004 // DMA Request Mode
#define USB_TXCSRH1_DTWE 0x00000002 // Data Toggle Write Enable
#define USB_TXCSRH1_DT 0x00000001 // Data Toggle
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXMAXP1 register.
//
//*****************************************************************************
#define USB_RXMAXP1_MAXLOAD_M 0x000007FF // Maximum Payload
#define USB_RXMAXP1_MAXLOAD_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXCSRL1 register.
//
//*****************************************************************************
#define USB_RXCSRL1_CLRDT 0x00000080 // Clear Data Toggle
#define USB_RXCSRL1_STALLED 0x00000040 // Endpoint Stalled
#define USB_RXCSRL1_STALL 0x00000020 // Send STALL
#define USB_RXCSRL1_REQPKT 0x00000020 // Request Packet
#define USB_RXCSRL1_FLUSH 0x00000010 // Flush FIFO
#define USB_RXCSRL1_DATAERR 0x00000008 // Data Error
#define USB_RXCSRL1_NAKTO 0x00000008 // NAK Timeout
#define USB_RXCSRL1_OVER 0x00000004 // Overrun
#define USB_RXCSRL1_ERROR 0x00000004 // Error
#define USB_RXCSRL1_FULL 0x00000002 // FIFO Full
#define USB_RXCSRL1_RXRDY 0x00000001 // Receive Packet Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXCSRH1 register.
//
//*****************************************************************************
#define USB_RXCSRH1_AUTOCL 0x00000080 // Auto Clear
#define USB_RXCSRH1_AUTORQ 0x00000040 // Auto Request
#define USB_RXCSRH1_ISO 0x00000040 // Isochronous Transfers
#define USB_RXCSRH1_DMAEN 0x00000020 // DMA Request Enable
#define USB_RXCSRH1_DISNYET 0x00000010 // Disable NYET
#define USB_RXCSRH1_PIDERR 0x00000010 // PID Error
#define USB_RXCSRH1_DMAMOD 0x00000008 // DMA Request Mode
#define USB_RXCSRH1_DTWE 0x00000004 // Data Toggle Write Enable
#define USB_RXCSRH1_DT 0x00000002 // Data Toggle
#define USB_RXCSRH1_INCOMPRX 0x00000001 // Incomplete RX Transmission
// Status
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXCOUNT1 register.
//
//*****************************************************************************
#define USB_RXCOUNT1_COUNT_M 0x00001FFF // Receive Packet Count
#define USB_RXCOUNT1_COUNT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXTYPE1 register.
//
//*****************************************************************************
#define USB_TXTYPE1_SPEED_M 0x000000C0 // Operating Speed
#define USB_TXTYPE1_SPEED_DFLT 0x00000000 // Default
#define USB_TXTYPE1_SPEED_HIGH 0x00000040 // High
#define USB_TXTYPE1_SPEED_FULL 0x00000080 // Full
#define USB_TXTYPE1_SPEED_LOW 0x000000C0 // Low
#define USB_TXTYPE1_PROTO_M 0x00000030 // Protocol
#define USB_TXTYPE1_PROTO_CTRL 0x00000000 // Control
#define USB_TXTYPE1_PROTO_ISOC 0x00000010 // Isochronous
#define USB_TXTYPE1_PROTO_BULK 0x00000020 // Bulk
#define USB_TXTYPE1_PROTO_INT 0x00000030 // Interrupt
#define USB_TXTYPE1_TEP_M 0x0000000F // Target Endpoint Number
#define USB_TXTYPE1_TEP_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXINTERVAL1
// register.
//
//*****************************************************************************
#define USB_TXINTERVAL1_NAKLMT_M \
0x000000FF // NAK Limit
#define USB_TXINTERVAL1_TXPOLL_M \
0x000000FF // TX Polling
#define USB_TXINTERVAL1_TXPOLL_S \
0
#define USB_TXINTERVAL1_NAKLMT_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXTYPE1 register.
//
//*****************************************************************************
#define USB_RXTYPE1_SPEED_M 0x000000C0 // Operating Speed
#define USB_RXTYPE1_SPEED_DFLT 0x00000000 // Default
#define USB_RXTYPE1_SPEED_HIGH 0x00000040 // High
#define USB_RXTYPE1_SPEED_FULL 0x00000080 // Full
#define USB_RXTYPE1_SPEED_LOW 0x000000C0 // Low
#define USB_RXTYPE1_PROTO_M 0x00000030 // Protocol
#define USB_RXTYPE1_PROTO_CTRL 0x00000000 // Control
#define USB_RXTYPE1_PROTO_ISOC 0x00000010 // Isochronous
#define USB_RXTYPE1_PROTO_BULK 0x00000020 // Bulk
#define USB_RXTYPE1_PROTO_INT 0x00000030 // Interrupt
#define USB_RXTYPE1_TEP_M 0x0000000F // Target Endpoint Number
#define USB_RXTYPE1_TEP_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXINTERVAL1
// register.
//
//*****************************************************************************
#define USB_RXINTERVAL1_TXPOLL_M \
0x000000FF // RX Polling
#define USB_RXINTERVAL1_NAKLMT_M \
0x000000FF // NAK Limit
#define USB_RXINTERVAL1_TXPOLL_S \
0
#define USB_RXINTERVAL1_NAKLMT_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXMAXP2 register.
//
//*****************************************************************************
#define USB_TXMAXP2_MAXLOAD_M 0x000007FF // Maximum Payload
#define USB_TXMAXP2_MAXLOAD_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXCSRL2 register.
//
//*****************************************************************************
#define USB_TXCSRL2_NAKTO 0x00000080 // NAK Timeout
#define USB_TXCSRL2_CLRDT 0x00000040 // Clear Data Toggle
#define USB_TXCSRL2_STALLED 0x00000020 // Endpoint Stalled
#define USB_TXCSRL2_SETUP 0x00000010 // Setup Packet
#define USB_TXCSRL2_STALL 0x00000010 // Send STALL
#define USB_TXCSRL2_FLUSH 0x00000008 // Flush FIFO
#define USB_TXCSRL2_ERROR 0x00000004 // Error
#define USB_TXCSRL2_UNDRN 0x00000004 // Underrun
#define USB_TXCSRL2_FIFONE 0x00000002 // FIFO Not Empty
#define USB_TXCSRL2_TXRDY 0x00000001 // Transmit Packet Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXCSRH2 register.
//
//*****************************************************************************
#define USB_TXCSRH2_AUTOSET 0x00000080 // Auto Set
#define USB_TXCSRH2_ISO 0x00000040 // Isochronous Transfers
#define USB_TXCSRH2_MODE 0x00000020 // Mode
#define USB_TXCSRH2_DMAEN 0x00000010 // DMA Request Enable
#define USB_TXCSRH2_FDT 0x00000008 // Force Data Toggle
#define USB_TXCSRH2_DMAMOD 0x00000004 // DMA Request Mode
#define USB_TXCSRH2_DTWE 0x00000002 // Data Toggle Write Enable
#define USB_TXCSRH2_DT 0x00000001 // Data Toggle
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXMAXP2 register.
//
//*****************************************************************************
#define USB_RXMAXP2_MAXLOAD_M 0x000007FF // Maximum Payload
#define USB_RXMAXP2_MAXLOAD_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXCSRL2 register.
//
//*****************************************************************************
#define USB_RXCSRL2_CLRDT 0x00000080 // Clear Data Toggle
#define USB_RXCSRL2_STALLED 0x00000040 // Endpoint Stalled
#define USB_RXCSRL2_REQPKT 0x00000020 // Request Packet
#define USB_RXCSRL2_STALL 0x00000020 // Send STALL
#define USB_RXCSRL2_FLUSH 0x00000010 // Flush FIFO
#define USB_RXCSRL2_DATAERR 0x00000008 // Data Error
#define USB_RXCSRL2_NAKTO 0x00000008 // NAK Timeout
#define USB_RXCSRL2_ERROR 0x00000004 // Error
#define USB_RXCSRL2_OVER 0x00000004 // Overrun
#define USB_RXCSRL2_FULL 0x00000002 // FIFO Full
#define USB_RXCSRL2_RXRDY 0x00000001 // Receive Packet Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXCSRH2 register.
//
//*****************************************************************************
#define USB_RXCSRH2_AUTOCL 0x00000080 // Auto Clear
#define USB_RXCSRH2_AUTORQ 0x00000040 // Auto Request
#define USB_RXCSRH2_ISO 0x00000040 // Isochronous Transfers
#define USB_RXCSRH2_DMAEN 0x00000020 // DMA Request Enable
#define USB_RXCSRH2_DISNYET 0x00000010 // Disable NYET
#define USB_RXCSRH2_PIDERR 0x00000010 // PID Error
#define USB_RXCSRH2_DMAMOD 0x00000008 // DMA Request Mode
#define USB_RXCSRH2_DTWE 0x00000004 // Data Toggle Write Enable
#define USB_RXCSRH2_DT 0x00000002 // Data Toggle
#define USB_RXCSRH2_INCOMPRX 0x00000001 // Incomplete RX Transmission
// Status
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXCOUNT2 register.
//
//*****************************************************************************
#define USB_RXCOUNT2_COUNT_M 0x00001FFF // Receive Packet Count
#define USB_RXCOUNT2_COUNT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXTYPE2 register.
//
//*****************************************************************************
#define USB_TXTYPE2_SPEED_M 0x000000C0 // Operating Speed
#define USB_TXTYPE2_SPEED_DFLT 0x00000000 // Default
#define USB_TXTYPE2_SPEED_HIGH 0x00000040 // High
#define USB_TXTYPE2_SPEED_FULL 0x00000080 // Full
#define USB_TXTYPE2_SPEED_LOW 0x000000C0 // Low
#define USB_TXTYPE2_PROTO_M 0x00000030 // Protocol
#define USB_TXTYPE2_PROTO_CTRL 0x00000000 // Control
#define USB_TXTYPE2_PROTO_ISOC 0x00000010 // Isochronous
#define USB_TXTYPE2_PROTO_BULK 0x00000020 // Bulk
#define USB_TXTYPE2_PROTO_INT 0x00000030 // Interrupt
#define USB_TXTYPE2_TEP_M 0x0000000F // Target Endpoint Number
#define USB_TXTYPE2_TEP_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXINTERVAL2
// register.
//
//*****************************************************************************
#define USB_TXINTERVAL2_TXPOLL_M \
0x000000FF // TX Polling
#define USB_TXINTERVAL2_NAKLMT_M \
0x000000FF // NAK Limit
#define USB_TXINTERVAL2_NAKLMT_S \
0
#define USB_TXINTERVAL2_TXPOLL_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXTYPE2 register.
//
//*****************************************************************************
#define USB_RXTYPE2_SPEED_M 0x000000C0 // Operating Speed
#define USB_RXTYPE2_SPEED_DFLT 0x00000000 // Default
#define USB_RXTYPE2_SPEED_HIGH 0x00000040 // High
#define USB_RXTYPE2_SPEED_FULL 0x00000080 // Full
#define USB_RXTYPE2_SPEED_LOW 0x000000C0 // Low
#define USB_RXTYPE2_PROTO_M 0x00000030 // Protocol
#define USB_RXTYPE2_PROTO_CTRL 0x00000000 // Control
#define USB_RXTYPE2_PROTO_ISOC 0x00000010 // Isochronous
#define USB_RXTYPE2_PROTO_BULK 0x00000020 // Bulk
#define USB_RXTYPE2_PROTO_INT 0x00000030 // Interrupt
#define USB_RXTYPE2_TEP_M 0x0000000F // Target Endpoint Number
#define USB_RXTYPE2_TEP_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXINTERVAL2
// register.
//
//*****************************************************************************
#define USB_RXINTERVAL2_TXPOLL_M \
0x000000FF // RX Polling
#define USB_RXINTERVAL2_NAKLMT_M \
0x000000FF // NAK Limit
#define USB_RXINTERVAL2_TXPOLL_S \
0
#define USB_RXINTERVAL2_NAKLMT_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXMAXP3 register.
//
//*****************************************************************************
#define USB_TXMAXP3_MAXLOAD_M 0x000007FF // Maximum Payload
#define USB_TXMAXP3_MAXLOAD_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXCSRL3 register.
//
//*****************************************************************************
#define USB_TXCSRL3_NAKTO 0x00000080 // NAK Timeout
#define USB_TXCSRL3_CLRDT 0x00000040 // Clear Data Toggle
#define USB_TXCSRL3_STALLED 0x00000020 // Endpoint Stalled
#define USB_TXCSRL3_SETUP 0x00000010 // Setup Packet
#define USB_TXCSRL3_STALL 0x00000010 // Send STALL
#define USB_TXCSRL3_FLUSH 0x00000008 // Flush FIFO
#define USB_TXCSRL3_ERROR 0x00000004 // Error
#define USB_TXCSRL3_UNDRN 0x00000004 // Underrun
#define USB_TXCSRL3_FIFONE 0x00000002 // FIFO Not Empty
#define USB_TXCSRL3_TXRDY 0x00000001 // Transmit Packet Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXCSRH3 register.
//
//*****************************************************************************
#define USB_TXCSRH3_AUTOSET 0x00000080 // Auto Set
#define USB_TXCSRH3_ISO 0x00000040 // Isochronous Transfers
#define USB_TXCSRH3_MODE 0x00000020 // Mode
#define USB_TXCSRH3_DMAEN 0x00000010 // DMA Request Enable
#define USB_TXCSRH3_FDT 0x00000008 // Force Data Toggle
#define USB_TXCSRH3_DMAMOD 0x00000004 // DMA Request Mode
#define USB_TXCSRH3_DTWE 0x00000002 // Data Toggle Write Enable
#define USB_TXCSRH3_DT 0x00000001 // Data Toggle
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXMAXP3 register.
//
//*****************************************************************************
#define USB_RXMAXP3_MAXLOAD_M 0x000007FF // Maximum Payload
#define USB_RXMAXP3_MAXLOAD_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXCSRL3 register.
//
//*****************************************************************************
#define USB_RXCSRL3_CLRDT 0x00000080 // Clear Data Toggle
#define USB_RXCSRL3_STALLED 0x00000040 // Endpoint Stalled
#define USB_RXCSRL3_STALL 0x00000020 // Send STALL
#define USB_RXCSRL3_REQPKT 0x00000020 // Request Packet
#define USB_RXCSRL3_FLUSH 0x00000010 // Flush FIFO
#define USB_RXCSRL3_DATAERR 0x00000008 // Data Error
#define USB_RXCSRL3_NAKTO 0x00000008 // NAK Timeout
#define USB_RXCSRL3_ERROR 0x00000004 // Error
#define USB_RXCSRL3_OVER 0x00000004 // Overrun
#define USB_RXCSRL3_FULL 0x00000002 // FIFO Full
#define USB_RXCSRL3_RXRDY 0x00000001 // Receive Packet Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXCSRH3 register.
//
//*****************************************************************************
#define USB_RXCSRH3_AUTOCL 0x00000080 // Auto Clear
#define USB_RXCSRH3_AUTORQ 0x00000040 // Auto Request
#define USB_RXCSRH3_ISO 0x00000040 // Isochronous Transfers
#define USB_RXCSRH3_DMAEN 0x00000020 // DMA Request Enable
#define USB_RXCSRH3_DISNYET 0x00000010 // Disable NYET
#define USB_RXCSRH3_PIDERR 0x00000010 // PID Error
#define USB_RXCSRH3_DMAMOD 0x00000008 // DMA Request Mode
#define USB_RXCSRH3_DTWE 0x00000004 // Data Toggle Write Enable
#define USB_RXCSRH3_DT 0x00000002 // Data Toggle
#define USB_RXCSRH3_INCOMPRX 0x00000001 // Incomplete RX Transmission
// Status
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXCOUNT3 register.
//
//*****************************************************************************
#define USB_RXCOUNT3_COUNT_M 0x00001FFF // Receive Packet Count
#define USB_RXCOUNT3_COUNT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXTYPE3 register.
//
//*****************************************************************************
#define USB_TXTYPE3_SPEED_M 0x000000C0 // Operating Speed
#define USB_TXTYPE3_SPEED_DFLT 0x00000000 // Default
#define USB_TXTYPE3_SPEED_HIGH 0x00000040 // High
#define USB_TXTYPE3_SPEED_FULL 0x00000080 // Full
#define USB_TXTYPE3_SPEED_LOW 0x000000C0 // Low
#define USB_TXTYPE3_PROTO_M 0x00000030 // Protocol
#define USB_TXTYPE3_PROTO_CTRL 0x00000000 // Control
#define USB_TXTYPE3_PROTO_ISOC 0x00000010 // Isochronous
#define USB_TXTYPE3_PROTO_BULK 0x00000020 // Bulk
#define USB_TXTYPE3_PROTO_INT 0x00000030 // Interrupt
#define USB_TXTYPE3_TEP_M 0x0000000F // Target Endpoint Number
#define USB_TXTYPE3_TEP_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXINTERVAL3
// register.
//
//*****************************************************************************
#define USB_TXINTERVAL3_TXPOLL_M \
0x000000FF // TX Polling
#define USB_TXINTERVAL3_NAKLMT_M \
0x000000FF // NAK Limit
#define USB_TXINTERVAL3_TXPOLL_S \
0
#define USB_TXINTERVAL3_NAKLMT_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXTYPE3 register.
//
//*****************************************************************************
#define USB_RXTYPE3_SPEED_M 0x000000C0 // Operating Speed
#define USB_RXTYPE3_SPEED_DFLT 0x00000000 // Default
#define USB_RXTYPE3_SPEED_HIGH 0x00000040 // High
#define USB_RXTYPE3_SPEED_FULL 0x00000080 // Full
#define USB_RXTYPE3_SPEED_LOW 0x000000C0 // Low
#define USB_RXTYPE3_PROTO_M 0x00000030 // Protocol
#define USB_RXTYPE3_PROTO_CTRL 0x00000000 // Control
#define USB_RXTYPE3_PROTO_ISOC 0x00000010 // Isochronous
#define USB_RXTYPE3_PROTO_BULK 0x00000020 // Bulk
#define USB_RXTYPE3_PROTO_INT 0x00000030 // Interrupt
#define USB_RXTYPE3_TEP_M 0x0000000F // Target Endpoint Number
#define USB_RXTYPE3_TEP_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXINTERVAL3
// register.
//
//*****************************************************************************
#define USB_RXINTERVAL3_TXPOLL_M \
0x000000FF // RX Polling
#define USB_RXINTERVAL3_NAKLMT_M \
0x000000FF // NAK Limit
#define USB_RXINTERVAL3_TXPOLL_S \
0
#define USB_RXINTERVAL3_NAKLMT_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXMAXP4 register.
//
//*****************************************************************************
#define USB_TXMAXP4_MAXLOAD_M 0x000007FF // Maximum Payload
#define USB_TXMAXP4_MAXLOAD_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXCSRL4 register.
//
//*****************************************************************************
#define USB_TXCSRL4_NAKTO 0x00000080 // NAK Timeout
#define USB_TXCSRL4_CLRDT 0x00000040 // Clear Data Toggle
#define USB_TXCSRL4_STALLED 0x00000020 // Endpoint Stalled
#define USB_TXCSRL4_SETUP 0x00000010 // Setup Packet
#define USB_TXCSRL4_STALL 0x00000010 // Send STALL
#define USB_TXCSRL4_FLUSH 0x00000008 // Flush FIFO
#define USB_TXCSRL4_ERROR 0x00000004 // Error
#define USB_TXCSRL4_UNDRN 0x00000004 // Underrun
#define USB_TXCSRL4_FIFONE 0x00000002 // FIFO Not Empty
#define USB_TXCSRL4_TXRDY 0x00000001 // Transmit Packet Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXCSRH4 register.
//
//*****************************************************************************
#define USB_TXCSRH4_AUTOSET 0x00000080 // Auto Set
#define USB_TXCSRH4_ISO 0x00000040 // Isochronous Transfers
#define USB_TXCSRH4_MODE 0x00000020 // Mode
#define USB_TXCSRH4_DMAEN 0x00000010 // DMA Request Enable
#define USB_TXCSRH4_FDT 0x00000008 // Force Data Toggle
#define USB_TXCSRH4_DMAMOD 0x00000004 // DMA Request Mode
#define USB_TXCSRH4_DTWE 0x00000002 // Data Toggle Write Enable
#define USB_TXCSRH4_DT 0x00000001 // Data Toggle
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXMAXP4 register.
//
//*****************************************************************************
#define USB_RXMAXP4_MAXLOAD_M 0x000007FF // Maximum Payload
#define USB_RXMAXP4_MAXLOAD_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXCSRL4 register.
//
//*****************************************************************************
#define USB_RXCSRL4_CLRDT 0x00000080 // Clear Data Toggle
#define USB_RXCSRL4_STALLED 0x00000040 // Endpoint Stalled
#define USB_RXCSRL4_STALL 0x00000020 // Send STALL
#define USB_RXCSRL4_REQPKT 0x00000020 // Request Packet
#define USB_RXCSRL4_FLUSH 0x00000010 // Flush FIFO
#define USB_RXCSRL4_NAKTO 0x00000008 // NAK Timeout
#define USB_RXCSRL4_DATAERR 0x00000008 // Data Error
#define USB_RXCSRL4_OVER 0x00000004 // Overrun
#define USB_RXCSRL4_ERROR 0x00000004 // Error
#define USB_RXCSRL4_FULL 0x00000002 // FIFO Full
#define USB_RXCSRL4_RXRDY 0x00000001 // Receive Packet Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXCSRH4 register.
//
//*****************************************************************************
#define USB_RXCSRH4_AUTOCL 0x00000080 // Auto Clear
#define USB_RXCSRH4_AUTORQ 0x00000040 // Auto Request
#define USB_RXCSRH4_ISO 0x00000040 // Isochronous Transfers
#define USB_RXCSRH4_DMAEN 0x00000020 // DMA Request Enable
#define USB_RXCSRH4_DISNYET 0x00000010 // Disable NYET
#define USB_RXCSRH4_PIDERR 0x00000010 // PID Error
#define USB_RXCSRH4_DMAMOD 0x00000008 // DMA Request Mode
#define USB_RXCSRH4_DTWE 0x00000004 // Data Toggle Write Enable
#define USB_RXCSRH4_DT 0x00000002 // Data Toggle
#define USB_RXCSRH4_INCOMPRX 0x00000001 // Incomplete RX Transmission
// Status
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXCOUNT4 register.
//
//*****************************************************************************
#define USB_RXCOUNT4_COUNT_M 0x00001FFF // Receive Packet Count
#define USB_RXCOUNT4_COUNT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXTYPE4 register.
//
//*****************************************************************************
#define USB_TXTYPE4_SPEED_M 0x000000C0 // Operating Speed
#define USB_TXTYPE4_SPEED_DFLT 0x00000000 // Default
#define USB_TXTYPE4_SPEED_HIGH 0x00000040 // High
#define USB_TXTYPE4_SPEED_FULL 0x00000080 // Full
#define USB_TXTYPE4_SPEED_LOW 0x000000C0 // Low
#define USB_TXTYPE4_PROTO_M 0x00000030 // Protocol
#define USB_TXTYPE4_PROTO_CTRL 0x00000000 // Control
#define USB_TXTYPE4_PROTO_ISOC 0x00000010 // Isochronous
#define USB_TXTYPE4_PROTO_BULK 0x00000020 // Bulk
#define USB_TXTYPE4_PROTO_INT 0x00000030 // Interrupt
#define USB_TXTYPE4_TEP_M 0x0000000F // Target Endpoint Number
#define USB_TXTYPE4_TEP_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXINTERVAL4
// register.
//
//*****************************************************************************
#define USB_TXINTERVAL4_TXPOLL_M \
0x000000FF // TX Polling
#define USB_TXINTERVAL4_NAKLMT_M \
0x000000FF // NAK Limit
#define USB_TXINTERVAL4_NAKLMT_S \
0
#define USB_TXINTERVAL4_TXPOLL_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXTYPE4 register.
//
//*****************************************************************************
#define USB_RXTYPE4_SPEED_M 0x000000C0 // Operating Speed
#define USB_RXTYPE4_SPEED_DFLT 0x00000000 // Default
#define USB_RXTYPE4_SPEED_HIGH 0x00000040 // High
#define USB_RXTYPE4_SPEED_FULL 0x00000080 // Full
#define USB_RXTYPE4_SPEED_LOW 0x000000C0 // Low
#define USB_RXTYPE4_PROTO_M 0x00000030 // Protocol
#define USB_RXTYPE4_PROTO_CTRL 0x00000000 // Control
#define USB_RXTYPE4_PROTO_ISOC 0x00000010 // Isochronous
#define USB_RXTYPE4_PROTO_BULK 0x00000020 // Bulk
#define USB_RXTYPE4_PROTO_INT 0x00000030 // Interrupt
#define USB_RXTYPE4_TEP_M 0x0000000F // Target Endpoint Number
#define USB_RXTYPE4_TEP_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXINTERVAL4
// register.
//
//*****************************************************************************
#define USB_RXINTERVAL4_TXPOLL_M \
0x000000FF // RX Polling
#define USB_RXINTERVAL4_NAKLMT_M \
0x000000FF // NAK Limit
#define USB_RXINTERVAL4_NAKLMT_S \
0
#define USB_RXINTERVAL4_TXPOLL_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXMAXP5 register.
//
//*****************************************************************************
#define USB_TXMAXP5_MAXLOAD_M 0x000007FF // Maximum Payload
#define USB_TXMAXP5_MAXLOAD_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXCSRL5 register.
//
//*****************************************************************************
#define USB_TXCSRL5_NAKTO 0x00000080 // NAK Timeout
#define USB_TXCSRL5_CLRDT 0x00000040 // Clear Data Toggle
#define USB_TXCSRL5_STALLED 0x00000020 // Endpoint Stalled
#define USB_TXCSRL5_SETUP 0x00000010 // Setup Packet
#define USB_TXCSRL5_STALL 0x00000010 // Send STALL
#define USB_TXCSRL5_FLUSH 0x00000008 // Flush FIFO
#define USB_TXCSRL5_ERROR 0x00000004 // Error
#define USB_TXCSRL5_UNDRN 0x00000004 // Underrun
#define USB_TXCSRL5_FIFONE 0x00000002 // FIFO Not Empty
#define USB_TXCSRL5_TXRDY 0x00000001 // Transmit Packet Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXCSRH5 register.
//
//*****************************************************************************
#define USB_TXCSRH5_AUTOSET 0x00000080 // Auto Set
#define USB_TXCSRH5_ISO 0x00000040 // Isochronous Transfers
#define USB_TXCSRH5_MODE 0x00000020 // Mode
#define USB_TXCSRH5_DMAEN 0x00000010 // DMA Request Enable
#define USB_TXCSRH5_FDT 0x00000008 // Force Data Toggle
#define USB_TXCSRH5_DMAMOD 0x00000004 // DMA Request Mode
#define USB_TXCSRH5_DTWE 0x00000002 // Data Toggle Write Enable
#define USB_TXCSRH5_DT 0x00000001 // Data Toggle
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXMAXP5 register.
//
//*****************************************************************************
#define USB_RXMAXP5_MAXLOAD_M 0x000007FF // Maximum Payload
#define USB_RXMAXP5_MAXLOAD_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXCSRL5 register.
//
//*****************************************************************************
#define USB_RXCSRL5_CLRDT 0x00000080 // Clear Data Toggle
#define USB_RXCSRL5_STALLED 0x00000040 // Endpoint Stalled
#define USB_RXCSRL5_STALL 0x00000020 // Send STALL
#define USB_RXCSRL5_REQPKT 0x00000020 // Request Packet
#define USB_RXCSRL5_FLUSH 0x00000010 // Flush FIFO
#define USB_RXCSRL5_NAKTO 0x00000008 // NAK Timeout
#define USB_RXCSRL5_DATAERR 0x00000008 // Data Error
#define USB_RXCSRL5_ERROR 0x00000004 // Error
#define USB_RXCSRL5_OVER 0x00000004 // Overrun
#define USB_RXCSRL5_FULL 0x00000002 // FIFO Full
#define USB_RXCSRL5_RXRDY 0x00000001 // Receive Packet Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXCSRH5 register.
//
//*****************************************************************************
#define USB_RXCSRH5_AUTOCL 0x00000080 // Auto Clear
#define USB_RXCSRH5_AUTORQ 0x00000040 // Auto Request
#define USB_RXCSRH5_ISO 0x00000040 // Isochronous Transfers
#define USB_RXCSRH5_DMAEN 0x00000020 // DMA Request Enable
#define USB_RXCSRH5_DISNYET 0x00000010 // Disable NYET
#define USB_RXCSRH5_PIDERR 0x00000010 // PID Error
#define USB_RXCSRH5_DMAMOD 0x00000008 // DMA Request Mode
#define USB_RXCSRH5_DTWE 0x00000004 // Data Toggle Write Enable
#define USB_RXCSRH5_DT 0x00000002 // Data Toggle
#define USB_RXCSRH5_INCOMPRX 0x00000001 // Incomplete RX Transmission
// Status
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXCOUNT5 register.
//
//*****************************************************************************
#define USB_RXCOUNT5_COUNT_M 0x00001FFF // Receive Packet Count
#define USB_RXCOUNT5_COUNT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXTYPE5 register.
//
//*****************************************************************************
#define USB_TXTYPE5_SPEED_M 0x000000C0 // Operating Speed
#define USB_TXTYPE5_SPEED_DFLT 0x00000000 // Default
#define USB_TXTYPE5_SPEED_HIGH 0x00000040 // High
#define USB_TXTYPE5_SPEED_FULL 0x00000080 // Full
#define USB_TXTYPE5_SPEED_LOW 0x000000C0 // Low
#define USB_TXTYPE5_PROTO_M 0x00000030 // Protocol
#define USB_TXTYPE5_PROTO_CTRL 0x00000000 // Control
#define USB_TXTYPE5_PROTO_ISOC 0x00000010 // Isochronous
#define USB_TXTYPE5_PROTO_BULK 0x00000020 // Bulk
#define USB_TXTYPE5_PROTO_INT 0x00000030 // Interrupt
#define USB_TXTYPE5_TEP_M 0x0000000F // Target Endpoint Number
#define USB_TXTYPE5_TEP_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXINTERVAL5
// register.
//
//*****************************************************************************
#define USB_TXINTERVAL5_TXPOLL_M \
0x000000FF // TX Polling
#define USB_TXINTERVAL5_NAKLMT_M \
0x000000FF // NAK Limit
#define USB_TXINTERVAL5_NAKLMT_S \
0
#define USB_TXINTERVAL5_TXPOLL_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXTYPE5 register.
//
//*****************************************************************************
#define USB_RXTYPE5_SPEED_M 0x000000C0 // Operating Speed
#define USB_RXTYPE5_SPEED_DFLT 0x00000000 // Default
#define USB_RXTYPE5_SPEED_HIGH 0x00000040 // High
#define USB_RXTYPE5_SPEED_FULL 0x00000080 // Full
#define USB_RXTYPE5_SPEED_LOW 0x000000C0 // Low
#define USB_RXTYPE5_PROTO_M 0x00000030 // Protocol
#define USB_RXTYPE5_PROTO_CTRL 0x00000000 // Control
#define USB_RXTYPE5_PROTO_ISOC 0x00000010 // Isochronous
#define USB_RXTYPE5_PROTO_BULK 0x00000020 // Bulk
#define USB_RXTYPE5_PROTO_INT 0x00000030 // Interrupt
#define USB_RXTYPE5_TEP_M 0x0000000F // Target Endpoint Number
#define USB_RXTYPE5_TEP_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXINTERVAL5
// register.
//
//*****************************************************************************
#define USB_RXINTERVAL5_TXPOLL_M \
0x000000FF // RX Polling
#define USB_RXINTERVAL5_NAKLMT_M \
0x000000FF // NAK Limit
#define USB_RXINTERVAL5_TXPOLL_S \
0
#define USB_RXINTERVAL5_NAKLMT_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXMAXP6 register.
//
//*****************************************************************************
#define USB_TXMAXP6_MAXLOAD_M 0x000007FF // Maximum Payload
#define USB_TXMAXP6_MAXLOAD_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXCSRL6 register.
//
//*****************************************************************************
#define USB_TXCSRL6_NAKTO 0x00000080 // NAK Timeout
#define USB_TXCSRL6_CLRDT 0x00000040 // Clear Data Toggle
#define USB_TXCSRL6_STALLED 0x00000020 // Endpoint Stalled
#define USB_TXCSRL6_STALL 0x00000010 // Send STALL
#define USB_TXCSRL6_SETUP 0x00000010 // Setup Packet
#define USB_TXCSRL6_FLUSH 0x00000008 // Flush FIFO
#define USB_TXCSRL6_ERROR 0x00000004 // Error
#define USB_TXCSRL6_UNDRN 0x00000004 // Underrun
#define USB_TXCSRL6_FIFONE 0x00000002 // FIFO Not Empty
#define USB_TXCSRL6_TXRDY 0x00000001 // Transmit Packet Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXCSRH6 register.
//
//*****************************************************************************
#define USB_TXCSRH6_AUTOSET 0x00000080 // Auto Set
#define USB_TXCSRH6_ISO 0x00000040 // Isochronous Transfers
#define USB_TXCSRH6_MODE 0x00000020 // Mode
#define USB_TXCSRH6_DMAEN 0x00000010 // DMA Request Enable
#define USB_TXCSRH6_FDT 0x00000008 // Force Data Toggle
#define USB_TXCSRH6_DMAMOD 0x00000004 // DMA Request Mode
#define USB_TXCSRH6_DTWE 0x00000002 // Data Toggle Write Enable
#define USB_TXCSRH6_DT 0x00000001 // Data Toggle
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXMAXP6 register.
//
//*****************************************************************************
#define USB_RXMAXP6_MAXLOAD_M 0x000007FF // Maximum Payload
#define USB_RXMAXP6_MAXLOAD_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXCSRL6 register.
//
//*****************************************************************************
#define USB_RXCSRL6_CLRDT 0x00000080 // Clear Data Toggle
#define USB_RXCSRL6_STALLED 0x00000040 // Endpoint Stalled
#define USB_RXCSRL6_REQPKT 0x00000020 // Request Packet
#define USB_RXCSRL6_STALL 0x00000020 // Send STALL
#define USB_RXCSRL6_FLUSH 0x00000010 // Flush FIFO
#define USB_RXCSRL6_NAKTO 0x00000008 // NAK Timeout
#define USB_RXCSRL6_DATAERR 0x00000008 // Data Error
#define USB_RXCSRL6_ERROR 0x00000004 // Error
#define USB_RXCSRL6_OVER 0x00000004 // Overrun
#define USB_RXCSRL6_FULL 0x00000002 // FIFO Full
#define USB_RXCSRL6_RXRDY 0x00000001 // Receive Packet Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXCSRH6 register.
//
//*****************************************************************************
#define USB_RXCSRH6_AUTOCL 0x00000080 // Auto Clear
#define USB_RXCSRH6_AUTORQ 0x00000040 // Auto Request
#define USB_RXCSRH6_ISO 0x00000040 // Isochronous Transfers
#define USB_RXCSRH6_DMAEN 0x00000020 // DMA Request Enable
#define USB_RXCSRH6_DISNYET 0x00000010 // Disable NYET
#define USB_RXCSRH6_PIDERR 0x00000010 // PID Error
#define USB_RXCSRH6_DMAMOD 0x00000008 // DMA Request Mode
#define USB_RXCSRH6_DTWE 0x00000004 // Data Toggle Write Enable
#define USB_RXCSRH6_DT 0x00000002 // Data Toggle
#define USB_RXCSRH6_INCOMPRX 0x00000001 // Incomplete RX Transmission
// Status
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXCOUNT6 register.
//
//*****************************************************************************
#define USB_RXCOUNT6_COUNT_M 0x00001FFF // Receive Packet Count
#define USB_RXCOUNT6_COUNT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXTYPE6 register.
//
//*****************************************************************************
#define USB_TXTYPE6_SPEED_M 0x000000C0 // Operating Speed
#define USB_TXTYPE6_SPEED_DFLT 0x00000000 // Default
#define USB_TXTYPE6_SPEED_HIGH 0x00000040 // High
#define USB_TXTYPE6_SPEED_FULL 0x00000080 // Full
#define USB_TXTYPE6_SPEED_LOW 0x000000C0 // Low
#define USB_TXTYPE6_PROTO_M 0x00000030 // Protocol
#define USB_TXTYPE6_PROTO_CTRL 0x00000000 // Control
#define USB_TXTYPE6_PROTO_ISOC 0x00000010 // Isochronous
#define USB_TXTYPE6_PROTO_BULK 0x00000020 // Bulk
#define USB_TXTYPE6_PROTO_INT 0x00000030 // Interrupt
#define USB_TXTYPE6_TEP_M 0x0000000F // Target Endpoint Number
#define USB_TXTYPE6_TEP_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXINTERVAL6
// register.
//
//*****************************************************************************
#define USB_TXINTERVAL6_TXPOLL_M \
0x000000FF // TX Polling
#define USB_TXINTERVAL6_NAKLMT_M \
0x000000FF // NAK Limit
#define USB_TXINTERVAL6_TXPOLL_S \
0
#define USB_TXINTERVAL6_NAKLMT_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXTYPE6 register.
//
//*****************************************************************************
#define USB_RXTYPE6_SPEED_M 0x000000C0 // Operating Speed
#define USB_RXTYPE6_SPEED_DFLT 0x00000000 // Default
#define USB_RXTYPE6_SPEED_HIGH 0x00000040 // High
#define USB_RXTYPE6_SPEED_FULL 0x00000080 // Full
#define USB_RXTYPE6_SPEED_LOW 0x000000C0 // Low
#define USB_RXTYPE6_PROTO_M 0x00000030 // Protocol
#define USB_RXTYPE6_PROTO_CTRL 0x00000000 // Control
#define USB_RXTYPE6_PROTO_ISOC 0x00000010 // Isochronous
#define USB_RXTYPE6_PROTO_BULK 0x00000020 // Bulk
#define USB_RXTYPE6_PROTO_INT 0x00000030 // Interrupt
#define USB_RXTYPE6_TEP_M 0x0000000F // Target Endpoint Number
#define USB_RXTYPE6_TEP_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXINTERVAL6
// register.
//
//*****************************************************************************
#define USB_RXINTERVAL6_TXPOLL_M \
0x000000FF // RX Polling
#define USB_RXINTERVAL6_NAKLMT_M \
0x000000FF // NAK Limit
#define USB_RXINTERVAL6_NAKLMT_S \
0
#define USB_RXINTERVAL6_TXPOLL_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXMAXP7 register.
//
//*****************************************************************************
#define USB_TXMAXP7_MAXLOAD_M 0x000007FF // Maximum Payload
#define USB_TXMAXP7_MAXLOAD_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXCSRL7 register.
//
//*****************************************************************************
#define USB_TXCSRL7_NAKTO 0x00000080 // NAK Timeout
#define USB_TXCSRL7_CLRDT 0x00000040 // Clear Data Toggle
#define USB_TXCSRL7_STALLED 0x00000020 // Endpoint Stalled
#define USB_TXCSRL7_STALL 0x00000010 // Send STALL
#define USB_TXCSRL7_SETUP 0x00000010 // Setup Packet
#define USB_TXCSRL7_FLUSH 0x00000008 // Flush FIFO
#define USB_TXCSRL7_ERROR 0x00000004 // Error
#define USB_TXCSRL7_UNDRN 0x00000004 // Underrun
#define USB_TXCSRL7_FIFONE 0x00000002 // FIFO Not Empty
#define USB_TXCSRL7_TXRDY 0x00000001 // Transmit Packet Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXCSRH7 register.
//
//*****************************************************************************
#define USB_TXCSRH7_AUTOSET 0x00000080 // Auto Set
#define USB_TXCSRH7_ISO 0x00000040 // Isochronous Transfers
#define USB_TXCSRH7_MODE 0x00000020 // Mode
#define USB_TXCSRH7_DMAEN 0x00000010 // DMA Request Enable
#define USB_TXCSRH7_FDT 0x00000008 // Force Data Toggle
#define USB_TXCSRH7_DMAMOD 0x00000004 // DMA Request Mode
#define USB_TXCSRH7_DTWE 0x00000002 // Data Toggle Write Enable
#define USB_TXCSRH7_DT 0x00000001 // Data Toggle
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXMAXP7 register.
//
//*****************************************************************************
#define USB_RXMAXP7_MAXLOAD_M 0x000007FF // Maximum Payload
#define USB_RXMAXP7_MAXLOAD_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXCSRL7 register.
//
//*****************************************************************************
#define USB_RXCSRL7_CLRDT 0x00000080 // Clear Data Toggle
#define USB_RXCSRL7_STALLED 0x00000040 // Endpoint Stalled
#define USB_RXCSRL7_REQPKT 0x00000020 // Request Packet
#define USB_RXCSRL7_STALL 0x00000020 // Send STALL
#define USB_RXCSRL7_FLUSH 0x00000010 // Flush FIFO
#define USB_RXCSRL7_DATAERR 0x00000008 // Data Error
#define USB_RXCSRL7_NAKTO 0x00000008 // NAK Timeout
#define USB_RXCSRL7_ERROR 0x00000004 // Error
#define USB_RXCSRL7_OVER 0x00000004 // Overrun
#define USB_RXCSRL7_FULL 0x00000002 // FIFO Full
#define USB_RXCSRL7_RXRDY 0x00000001 // Receive Packet Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXCSRH7 register.
//
//*****************************************************************************
#define USB_RXCSRH7_AUTOCL 0x00000080 // Auto Clear
#define USB_RXCSRH7_ISO 0x00000040 // Isochronous Transfers
#define USB_RXCSRH7_AUTORQ 0x00000040 // Auto Request
#define USB_RXCSRH7_DMAEN 0x00000020 // DMA Request Enable
#define USB_RXCSRH7_PIDERR 0x00000010 // PID Error
#define USB_RXCSRH7_DISNYET 0x00000010 // Disable NYET
#define USB_RXCSRH7_DMAMOD 0x00000008 // DMA Request Mode
#define USB_RXCSRH7_DTWE 0x00000004 // Data Toggle Write Enable
#define USB_RXCSRH7_DT 0x00000002 // Data Toggle
#define USB_RXCSRH7_INCOMPRX 0x00000001 // Incomplete RX Transmission
// Status
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXCOUNT7 register.
//
//*****************************************************************************
#define USB_RXCOUNT7_COUNT_M 0x00001FFF // Receive Packet Count
#define USB_RXCOUNT7_COUNT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXTYPE7 register.
//
//*****************************************************************************
#define USB_TXTYPE7_SPEED_M 0x000000C0 // Operating Speed
#define USB_TXTYPE7_SPEED_DFLT 0x00000000 // Default
#define USB_TXTYPE7_SPEED_HIGH 0x00000040 // High
#define USB_TXTYPE7_SPEED_FULL 0x00000080 // Full
#define USB_TXTYPE7_SPEED_LOW 0x000000C0 // Low
#define USB_TXTYPE7_PROTO_M 0x00000030 // Protocol
#define USB_TXTYPE7_PROTO_CTRL 0x00000000 // Control
#define USB_TXTYPE7_PROTO_ISOC 0x00000010 // Isochronous
#define USB_TXTYPE7_PROTO_BULK 0x00000020 // Bulk
#define USB_TXTYPE7_PROTO_INT 0x00000030 // Interrupt
#define USB_TXTYPE7_TEP_M 0x0000000F // Target Endpoint Number
#define USB_TXTYPE7_TEP_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXINTERVAL7
// register.
//
//*****************************************************************************
#define USB_TXINTERVAL7_TXPOLL_M \
0x000000FF // TX Polling
#define USB_TXINTERVAL7_NAKLMT_M \
0x000000FF // NAK Limit
#define USB_TXINTERVAL7_NAKLMT_S \
0
#define USB_TXINTERVAL7_TXPOLL_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXTYPE7 register.
//
//*****************************************************************************
#define USB_RXTYPE7_SPEED_M 0x000000C0 // Operating Speed
#define USB_RXTYPE7_SPEED_DFLT 0x00000000 // Default
#define USB_RXTYPE7_SPEED_HIGH 0x00000040 // High
#define USB_RXTYPE7_SPEED_FULL 0x00000080 // Full
#define USB_RXTYPE7_SPEED_LOW 0x000000C0 // Low
#define USB_RXTYPE7_PROTO_M 0x00000030 // Protocol
#define USB_RXTYPE7_PROTO_CTRL 0x00000000 // Control
#define USB_RXTYPE7_PROTO_ISOC 0x00000010 // Isochronous
#define USB_RXTYPE7_PROTO_BULK 0x00000020 // Bulk
#define USB_RXTYPE7_PROTO_INT 0x00000030 // Interrupt
#define USB_RXTYPE7_TEP_M 0x0000000F // Target Endpoint Number
#define USB_RXTYPE7_TEP_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXINTERVAL7
// register.
//
//*****************************************************************************
#define USB_RXINTERVAL7_TXPOLL_M \
0x000000FF // RX Polling
#define USB_RXINTERVAL7_NAKLMT_M \
0x000000FF // NAK Limit
#define USB_RXINTERVAL7_NAKLMT_S \
0
#define USB_RXINTERVAL7_TXPOLL_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_DMAINTR register.
//
//*****************************************************************************
#define USB_DMAINTR_CH7 0x00000080 // Channel 7 DMA Interrupt
#define USB_DMAINTR_CH6 0x00000040 // Channel 6 DMA Interrupt
#define USB_DMAINTR_CH5 0x00000020 // Channel 5 DMA Interrupt
#define USB_DMAINTR_CH4 0x00000010 // Channel 4 DMA Interrupt
#define USB_DMAINTR_CH3 0x00000008 // Channel 3 DMA Interrupt
#define USB_DMAINTR_CH2 0x00000004 // Channel 2 DMA Interrupt
#define USB_DMAINTR_CH1 0x00000002 // Channel 1 DMA Interrupt
#define USB_DMAINTR_CH0 0x00000001 // Channel 0 DMA Interrupt
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_DMACTL0 register.
//
//*****************************************************************************
#define USB_DMACTL0_BRSTM_M 0x00000600 // Burst Mode
#define USB_DMACTL0_BRSTM_ANY 0x00000000 // Bursts of unspecified length
#define USB_DMACTL0_BRSTM_INC4 0x00000200 // INCR4 or unspecified length
#define USB_DMACTL0_BRSTM_INC8 0x00000400 // INCR8, INCR4 or unspecified
// length
#define USB_DMACTL0_BRSTM_INC16 0x00000600 // INCR16, INCR8, INCR4 or
// unspecified length
#define USB_DMACTL0_ERR 0x00000100 // Bus Error Bit
#define USB_DMACTL0_EP_M 0x000000F0 // Endpoint number
#define USB_DMACTL0_IE 0x00000008 // DMA Interrupt Enable
#define USB_DMACTL0_MODE 0x00000004 // DMA Transfer Mode
#define USB_DMACTL0_DIR 0x00000002 // DMA Direction
#define USB_DMACTL0_ENABLE 0x00000001 // DMA Transfer Enable
#define USB_DMACTL0_EP_S 4
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_DMAADDR0 register.
//
//*****************************************************************************
#define USB_DMAADDR0_ADDR_M 0xFFFFFFFC // DMA Address
#define USB_DMAADDR0_ADDR_S 2
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_DMACOUNT0
// register.
//
//*****************************************************************************
#define USB_DMACOUNT0_COUNT_M 0xFFFFFFFC // DMA Count
#define USB_DMACOUNT0_COUNT_S 2
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_DMACTL1 register.
//
//*****************************************************************************
#define USB_DMACTL1_BRSTM_M 0x00000600 // Burst Mode
#define USB_DMACTL1_BRSTM_ANY 0x00000000 // Bursts of unspecified length
#define USB_DMACTL1_BRSTM_INC4 0x00000200 // INCR4 or unspecified length
#define USB_DMACTL1_BRSTM_INC8 0x00000400 // INCR8, INCR4 or unspecified
// length
#define USB_DMACTL1_BRSTM_INC16 0x00000600 // INCR16, INCR8, INCR4 or
// unspecified length
#define USB_DMACTL1_ERR 0x00000100 // Bus Error Bit
#define USB_DMACTL1_EP_M 0x000000F0 // Endpoint number
#define USB_DMACTL1_IE 0x00000008 // DMA Interrupt Enable
#define USB_DMACTL1_MODE 0x00000004 // DMA Transfer Mode
#define USB_DMACTL1_DIR 0x00000002 // DMA Direction
#define USB_DMACTL1_ENABLE 0x00000001 // DMA Transfer Enable
#define USB_DMACTL1_EP_S 4
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_DMAADDR1 register.
//
//*****************************************************************************
#define USB_DMAADDR1_ADDR_M 0xFFFFFFFC // DMA Address
#define USB_DMAADDR1_ADDR_S 2
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_DMACOUNT1
// register.
//
//*****************************************************************************
#define USB_DMACOUNT1_COUNT_M 0xFFFFFFFC // DMA Count
#define USB_DMACOUNT1_COUNT_S 2
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_DMACTL2 register.
//
//*****************************************************************************
#define USB_DMACTL2_BRSTM_M 0x00000600 // Burst Mode
#define USB_DMACTL2_BRSTM_ANY 0x00000000 // Bursts of unspecified length
#define USB_DMACTL2_BRSTM_INC4 0x00000200 // INCR4 or unspecified length
#define USB_DMACTL2_BRSTM_INC8 0x00000400 // INCR8, INCR4 or unspecified
// length
#define USB_DMACTL2_BRSTM_INC16 0x00000600 // INCR16, INCR8, INCR4 or
// unspecified length
#define USB_DMACTL2_ERR 0x00000100 // Bus Error Bit
#define USB_DMACTL2_EP_M 0x000000F0 // Endpoint number
#define USB_DMACTL2_IE 0x00000008 // DMA Interrupt Enable
#define USB_DMACTL2_MODE 0x00000004 // DMA Transfer Mode
#define USB_DMACTL2_DIR 0x00000002 // DMA Direction
#define USB_DMACTL2_ENABLE 0x00000001 // DMA Transfer Enable
#define USB_DMACTL2_EP_S 4
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_DMAADDR2 register.
//
//*****************************************************************************
#define USB_DMAADDR2_ADDR_M 0xFFFFFFFC // DMA Address
#define USB_DMAADDR2_ADDR_S 2
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_DMACOUNT2
// register.
//
//*****************************************************************************
#define USB_DMACOUNT2_COUNT_M 0xFFFFFFFC // DMA Count
#define USB_DMACOUNT2_COUNT_S 2
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_DMACTL3 register.
//
//*****************************************************************************
#define USB_DMACTL3_BRSTM_M 0x00000600 // Burst Mode
#define USB_DMACTL3_BRSTM_ANY 0x00000000 // Bursts of unspecified length
#define USB_DMACTL3_BRSTM_INC4 0x00000200 // INCR4 or unspecified length
#define USB_DMACTL3_BRSTM_INC8 0x00000400 // INCR8, INCR4 or unspecified
// length
#define USB_DMACTL3_BRSTM_INC16 0x00000600 // INCR16, INCR8, INCR4 or
// unspecified length
#define USB_DMACTL3_ERR 0x00000100 // Bus Error Bit
#define USB_DMACTL3_EP_M 0x000000F0 // Endpoint number
#define USB_DMACTL3_IE 0x00000008 // DMA Interrupt Enable
#define USB_DMACTL3_MODE 0x00000004 // DMA Transfer Mode
#define USB_DMACTL3_DIR 0x00000002 // DMA Direction
#define USB_DMACTL3_ENABLE 0x00000001 // DMA Transfer Enable
#define USB_DMACTL3_EP_S 4
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_DMAADDR3 register.
//
//*****************************************************************************
#define USB_DMAADDR3_ADDR_M 0xFFFFFFFC // DMA Address
#define USB_DMAADDR3_ADDR_S 2
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_DMACOUNT3
// register.
//
//*****************************************************************************
#define USB_DMACOUNT3_COUNT_M 0xFFFFFFFC // DMA Count
#define USB_DMACOUNT3_COUNT_S 2
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_DMACTL4 register.
//
//*****************************************************************************
#define USB_DMACTL4_BRSTM_M 0x00000600 // Burst Mode
#define USB_DMACTL4_BRSTM_ANY 0x00000000 // Bursts of unspecified length
#define USB_DMACTL4_BRSTM_INC4 0x00000200 // INCR4 or unspecified length
#define USB_DMACTL4_BRSTM_INC8 0x00000400 // INCR8, INCR4 or unspecified
// length
#define USB_DMACTL4_BRSTM_INC16 0x00000600 // INCR16, INCR8, INCR4 or
// unspecified length
#define USB_DMACTL4_ERR 0x00000100 // Bus Error Bit
#define USB_DMACTL4_EP_M 0x000000F0 // Endpoint number
#define USB_DMACTL4_IE 0x00000008 // DMA Interrupt Enable
#define USB_DMACTL4_MODE 0x00000004 // DMA Transfer Mode
#define USB_DMACTL4_DIR 0x00000002 // DMA Direction
#define USB_DMACTL4_ENABLE 0x00000001 // DMA Transfer Enable
#define USB_DMACTL4_EP_S 4
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_DMAADDR4 register.
//
//*****************************************************************************
#define USB_DMAADDR4_ADDR_M 0xFFFFFFFC // DMA Address
#define USB_DMAADDR4_ADDR_S 2
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_DMACOUNT4
// register.
//
//*****************************************************************************
#define USB_DMACOUNT4_COUNT_M 0xFFFFFFFC // DMA Count
#define USB_DMACOUNT4_COUNT_S 2
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_DMACTL5 register.
//
//*****************************************************************************
#define USB_DMACTL5_BRSTM_M 0x00000600 // Burst Mode
#define USB_DMACTL5_BRSTM_ANY 0x00000000 // Bursts of unspecified length
#define USB_DMACTL5_BRSTM_INC4 0x00000200 // INCR4 or unspecified length
#define USB_DMACTL5_BRSTM_INC8 0x00000400 // INCR8, INCR4 or unspecified
// length
#define USB_DMACTL5_BRSTM_INC16 0x00000600 // INCR16, INCR8, INCR4 or
// unspecified length
#define USB_DMACTL5_ERR 0x00000100 // Bus Error Bit
#define USB_DMACTL5_EP_M 0x000000F0 // Endpoint number
#define USB_DMACTL5_IE 0x00000008 // DMA Interrupt Enable
#define USB_DMACTL5_MODE 0x00000004 // DMA Transfer Mode
#define USB_DMACTL5_DIR 0x00000002 // DMA Direction
#define USB_DMACTL5_ENABLE 0x00000001 // DMA Transfer Enable
#define USB_DMACTL5_EP_S 4
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_DMAADDR5 register.
//
//*****************************************************************************
#define USB_DMAADDR5_ADDR_M 0xFFFFFFFC // DMA Address
#define USB_DMAADDR5_ADDR_S 2
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_DMACOUNT5
// register.
//
//*****************************************************************************
#define USB_DMACOUNT5_COUNT_M 0xFFFFFFFC // DMA Count
#define USB_DMACOUNT5_COUNT_S 2
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_DMACTL6 register.
//
//*****************************************************************************
#define USB_DMACTL6_BRSTM_M 0x00000600 // Burst Mode
#define USB_DMACTL6_BRSTM_ANY 0x00000000 // Bursts of unspecified length
#define USB_DMACTL6_BRSTM_INC4 0x00000200 // INCR4 or unspecified length
#define USB_DMACTL6_BRSTM_INC8 0x00000400 // INCR8, INCR4 or unspecified
// length
#define USB_DMACTL6_BRSTM_INC16 0x00000600 // INCR16, INCR8, INCR4 or
// unspecified length
#define USB_DMACTL6_ERR 0x00000100 // Bus Error Bit
#define USB_DMACTL6_EP_M 0x000000F0 // Endpoint number
#define USB_DMACTL6_IE 0x00000008 // DMA Interrupt Enable
#define USB_DMACTL6_MODE 0x00000004 // DMA Transfer Mode
#define USB_DMACTL6_DIR 0x00000002 // DMA Direction
#define USB_DMACTL6_ENABLE 0x00000001 // DMA Transfer Enable
#define USB_DMACTL6_EP_S 4
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_DMAADDR6 register.
//
//*****************************************************************************
#define USB_DMAADDR6_ADDR_M 0xFFFFFFFC // DMA Address
#define USB_DMAADDR6_ADDR_S 2
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_DMACOUNT6
// register.
//
//*****************************************************************************
#define USB_DMACOUNT6_COUNT_M 0xFFFFFFFC // DMA Count
#define USB_DMACOUNT6_COUNT_S 2
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_DMACTL7 register.
//
//*****************************************************************************
#define USB_DMACTL7_BRSTM_M 0x00000600 // Burst Mode
#define USB_DMACTL7_BRSTM_ANY 0x00000000 // Bursts of unspecified length
#define USB_DMACTL7_BRSTM_INC4 0x00000200 // INCR4 or unspecified length
#define USB_DMACTL7_BRSTM_INC8 0x00000400 // INCR8, INCR4 or unspecified
// length
#define USB_DMACTL7_BRSTM_INC16 0x00000600 // INCR16, INCR8, INCR4 or
// unspecified length
#define USB_DMACTL7_ERR 0x00000100 // Bus Error Bit
#define USB_DMACTL7_EP_M 0x000000F0 // Endpoint number
#define USB_DMACTL7_IE 0x00000008 // DMA Interrupt Enable
#define USB_DMACTL7_MODE 0x00000004 // DMA Transfer Mode
#define USB_DMACTL7_DIR 0x00000002 // DMA Direction
#define USB_DMACTL7_ENABLE 0x00000001 // DMA Transfer Enable
#define USB_DMACTL7_EP_S 4
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_DMAADDR7 register.
//
//*****************************************************************************
#define USB_DMAADDR7_ADDR_M 0xFFFFFFFC // DMA Address
#define USB_DMAADDR7_ADDR_S 2
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_DMACOUNT7
// register.
//
//*****************************************************************************
#define USB_DMACOUNT7_COUNT_M 0xFFFFFFFC // DMA Count
#define USB_DMACOUNT7_COUNT_S 2
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RQPKTCOUNT1
// register.
//
//*****************************************************************************
#define USB_RQPKTCOUNT1_M 0x0000FFFF // Block Transfer Packet Count
#define USB_RQPKTCOUNT1_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RQPKTCOUNT2
// register.
//
//*****************************************************************************
#define USB_RQPKTCOUNT2_M 0x0000FFFF // Block Transfer Packet Count
#define USB_RQPKTCOUNT2_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RQPKTCOUNT3
// register.
//
//*****************************************************************************
#define USB_RQPKTCOUNT3_M 0x0000FFFF // Block Transfer Packet Count
#define USB_RQPKTCOUNT3_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RQPKTCOUNT4
// register.
//
//*****************************************************************************
#define USB_RQPKTCOUNT4_COUNT_M 0x0000FFFF // Block Transfer Packet Count
#define USB_RQPKTCOUNT4_COUNT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RQPKTCOUNT5
// register.
//
//*****************************************************************************
#define USB_RQPKTCOUNT5_COUNT_M 0x0000FFFF // Block Transfer Packet Count
#define USB_RQPKTCOUNT5_COUNT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RQPKTCOUNT6
// register.
//
//*****************************************************************************
#define USB_RQPKTCOUNT6_COUNT_M 0x0000FFFF // Block Transfer Packet Count
#define USB_RQPKTCOUNT6_COUNT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RQPKTCOUNT7
// register.
//
//*****************************************************************************
#define USB_RQPKTCOUNT7_COUNT_M 0x0000FFFF // Block Transfer Packet Count
#define USB_RQPKTCOUNT7_COUNT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_RXDPKTBUFDIS
// register.
//
//*****************************************************************************
#define USB_RXDPKTBUFDIS_EP7 0x00000080 // EP7 RX Double-Packet Buffer
// Disable
#define USB_RXDPKTBUFDIS_EP6 0x00000040 // EP6 RX Double-Packet Buffer
// Disable
#define USB_RXDPKTBUFDIS_EP5 0x00000020 // EP5 RX Double-Packet Buffer
// Disable
#define USB_RXDPKTBUFDIS_EP4 0x00000010 // EP4 RX Double-Packet Buffer
// Disable
#define USB_RXDPKTBUFDIS_EP3 0x00000008 // EP3 RX Double-Packet Buffer
// Disable
#define USB_RXDPKTBUFDIS_EP2 0x00000004 // EP2 RX Double-Packet Buffer
// Disable
#define USB_RXDPKTBUFDIS_EP1 0x00000002 // EP1 RX Double-Packet Buffer
// Disable
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_TXDPKTBUFDIS
// register.
//
//*****************************************************************************
#define USB_TXDPKTBUFDIS_EP7 0x00000080 // EP7 TX Double-Packet Buffer
// Disable
#define USB_TXDPKTBUFDIS_EP6 0x00000040 // EP6 TX Double-Packet Buffer
// Disable
#define USB_TXDPKTBUFDIS_EP5 0x00000020 // EP5 TX Double-Packet Buffer
// Disable
#define USB_TXDPKTBUFDIS_EP4 0x00000010 // EP4 TX Double-Packet Buffer
// Disable
#define USB_TXDPKTBUFDIS_EP3 0x00000008 // EP3 TX Double-Packet Buffer
// Disable
#define USB_TXDPKTBUFDIS_EP2 0x00000004 // EP2 TX Double-Packet Buffer
// Disable
#define USB_TXDPKTBUFDIS_EP1 0x00000002 // EP1 TX Double-Packet Buffer
// Disable
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_CTO register.
//
//*****************************************************************************
#define USB_CTO_CCTV_M 0x0000FFFF // Configurable Chirp Timeout Value
#define USB_CTO_CCTV_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_HHSRTN register.
//
//*****************************************************************************
#define USB_HHSRTN_HHSRTN_M 0x0000FFFF // HIgh Speed to UTM Operating
// Delay
#define USB_HHSRTN_HHSRTN_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_HSBT register.
//
//*****************************************************************************
#define USB_HSBT_HSBT_M 0x0000000F // High Speed Timeout Adder
#define USB_HSBT_HSBT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_LPMATTR register.
//
//*****************************************************************************
#define USB_LPMATTR_ENDPT_M 0x0000F000 // Endpoint
#define USB_LPMATTR_RMTWAK 0x00000100 // Remote Wake
#define USB_LPMATTR_HIRD_M 0x000000F0 // Host Initiated Resume Duration
#define USB_LPMATTR_LS_M 0x0000000F // Link State
#define USB_LPMATTR_LS_L1 0x00000001 // Sleep State (L1)
#define USB_LPMATTR_ENDPT_S 12
#define USB_LPMATTR_HIRD_S 4
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_LPMCNTRL register.
//
//*****************************************************************************
#define USB_LPMCNTRL_NAK 0x00000010 // LPM NAK
#define USB_LPMCNTRL_EN_M 0x0000000C // LPM Enable
#define USB_LPMCNTRL_EN_NONE 0x00000000 // LPM and Extended transactions
// are not supported. In this case,
// the USB does not respond to LPM
// transactions and LPM
// transactions cause a timeout
#define USB_LPMCNTRL_EN_EXT 0x00000004 // LPM is not supported but
// extended transactions are
// supported. In this case, the USB
// does respond to an LPM
// transaction with a STALL
#define USB_LPMCNTRL_EN_LPMEXT 0x0000000C // The USB supports LPM extended
// transactions. In this case, the
// USB responds with a NYET or an
// ACK as determined by the value
// of TXLPM and other conditions
#define USB_LPMCNTRL_RES 0x00000002 // LPM Resume
#define USB_LPMCNTRL_TXLPM 0x00000001 // Transmit LPM Transaction Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_LPMIM register.
//
//*****************************************************************************
#define USB_LPMIM_ERR 0x00000020 // LPM Error Interrupt Mask
#define USB_LPMIM_RES 0x00000010 // LPM Resume Interrupt Mask
#define USB_LPMIM_NC 0x00000008 // LPM NC Interrupt Mask
#define USB_LPMIM_ACK 0x00000004 // LPM ACK Interrupt Mask
#define USB_LPMIM_NY 0x00000002 // LPM NY Interrupt Mask
#define USB_LPMIM_STALL 0x00000001 // LPM STALL Interrupt Mask
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_LPMRIS register.
//
//*****************************************************************************
#define USB_LPMRIS_ERR 0x00000020 // LPM Interrupt Status
#define USB_LPMRIS_RES 0x00000010 // LPM Resume Interrupt Status
#define USB_LPMRIS_NC 0x00000008 // LPM NC Interrupt Status
#define USB_LPMRIS_ACK 0x00000004 // LPM ACK Interrupt Status
#define USB_LPMRIS_NY 0x00000002 // LPM NY Interrupt Status
#define USB_LPMRIS_LPMST 0x00000001 // LPM STALL Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_LPMFADDR register.
//
//*****************************************************************************
#define USB_LPMFADDR_ADDR_M 0x0000007F // LPM Function Address
#define USB_LPMFADDR_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_EPC register.
//
//*****************************************************************************
#define USB_EPC_PFLTACT_M 0x00000300 // Power Fault Action
#define USB_EPC_PFLTACT_UNCHG 0x00000000 // Unchanged
#define USB_EPC_PFLTACT_TRIS 0x00000100 // Tristate
#define USB_EPC_PFLTACT_LOW 0x00000200 // Low
#define USB_EPC_PFLTACT_HIGH 0x00000300 // High
#define USB_EPC_PFLTAEN 0x00000040 // Power Fault Action Enable
#define USB_EPC_PFLTSEN_HIGH 0x00000020 // Power Fault Sense
#define USB_EPC_PFLTEN 0x00000010 // Power Fault Input Enable
#define USB_EPC_EPENDE 0x00000004 // EPEN Drive Enable
#define USB_EPC_EPEN_M 0x00000003 // External Power Supply Enable
// Configuration
#define USB_EPC_EPEN_LOW 0x00000000 // Power Enable Active Low
#define USB_EPC_EPEN_HIGH 0x00000001 // Power Enable Active High
#define USB_EPC_EPEN_VBLOW 0x00000002 // Power Enable High if VBUS Low
// (OTG only)
#define USB_EPC_EPEN_VBHIGH 0x00000003 // Power Enable High if VBUS High
// (OTG only)
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_EPCRIS register.
//
//*****************************************************************************
#define USB_EPCRIS_PF 0x00000001 // USB Power Fault Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_EPCIM register.
//
//*****************************************************************************
#define USB_EPCIM_PF 0x00000001 // USB Power Fault Interrupt Mask
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_EPCISC register.
//
//*****************************************************************************
#define USB_EPCISC_PF 0x00000001 // USB Power Fault Interrupt Status
// and Clear
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_DRRIS register.
//
//*****************************************************************************
#define USB_DRRIS_RESUME 0x00000001 // RESUME Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_DRIM register.
//
//*****************************************************************************
#define USB_DRIM_RESUME 0x00000001 // RESUME Interrupt Mask
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_DRISC register.
//
//*****************************************************************************
#define USB_DRISC_RESUME 0x00000001 // RESUME Interrupt Status and
// Clear
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_GPCS register.
//
//*****************************************************************************
#define USB_GPCS_DEVMOD_M 0x00000007 // Device Mode
#define USB_GPCS_DEVMOD_OTG 0x00000000 // Use USB0VBUS and USB0ID pin
#define USB_GPCS_DEVMOD_HOST 0x00000002 // Force USB0VBUS and USB0ID low
#define USB_GPCS_DEVMOD_DEV 0x00000003 // Force USB0VBUS and USB0ID high
#define USB_GPCS_DEVMOD_HOSTVBUS \
0x00000004 // Use USB0VBUS and force USB0ID
// low
#define USB_GPCS_DEVMOD_DEVVBUS 0x00000005 // Use USB0VBUS and force USB0ID
// high
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_VDC register.
//
//*****************************************************************************
#define USB_VDC_VBDEN 0x00000001 // VBUS Droop Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_VDCRIS register.
//
//*****************************************************************************
#define USB_VDCRIS_VD 0x00000001 // VBUS Droop Raw Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_VDCIM register.
//
//*****************************************************************************
#define USB_VDCIM_VD 0x00000001 // VBUS Droop Interrupt Mask
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_VDCISC register.
//
//*****************************************************************************
#define USB_VDCISC_VD 0x00000001 // VBUS Droop Interrupt Status and
// Clear
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_PP register.
//
//*****************************************************************************
#define USB_PP_ECNT_M 0x0000FF00 // Endpoint Count
#define USB_PP_USB_M 0x000000C0 // USB Capability
#define USB_PP_USB_DEVICE 0x00000040 // DEVICE
#define USB_PP_USB_HOSTDEVICE 0x00000080 // HOST
#define USB_PP_USB_OTG 0x000000C0 // OTG
#define USB_PP_ULPI 0x00000020 // ULPI Present
#define USB_PP_PHY 0x00000010 // PHY Present
#define USB_PP_TYPE_M 0x0000000F // Controller Type
#define USB_PP_TYPE_0 0x00000000 // The first-generation USB
// controller
#define USB_PP_TYPE_1 0x00000001 // The second-generation USB
// controller revision
#define USB_PP_ECNT_S 8
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_PC register.
//
//*****************************************************************************
#define USB_PC_ULPIEN 0x00010000 // ULPI Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the USB_O_CC register.
//
//*****************************************************************************
#define USB_CC_CLKEN 0x00000200 // USB Clock Enable
#define USB_CC_CSD 0x00000100 // Clock Source/Direction
#define USB_CC_CLKDIV_M 0x0000000F // PLL Clock Divisor
#define USB_CC_CLKDIV_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_IM register.
//
//*****************************************************************************
#define GPIO_IM_DMAIME 0x00000100 // GPIO uDMA Done Interrupt Mask
// Enable
#define GPIO_IM_GPIO_M 0x000000FF // GPIO Interrupt Mask Enable
#define GPIO_IM_GPIO_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_RIS register.
//
//*****************************************************************************
#define GPIO_RIS_DMARIS 0x00000100 // GPIO uDMA Done Interrupt Raw
// Status
#define GPIO_RIS_GPIO_M 0x000000FF // GPIO Interrupt Raw Status
#define GPIO_RIS_GPIO_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_MIS register.
//
//*****************************************************************************
#define GPIO_MIS_DMAMIS 0x00000100 // GPIO uDMA Done Masked Interrupt
// Status
#define GPIO_MIS_GPIO_M 0x000000FF // GPIO Masked Interrupt Status
#define GPIO_MIS_GPIO_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_ICR register.
//
//*****************************************************************************
#define GPIO_ICR_DMAIC 0x00000100 // GPIO uDMA Interrupt Clear
#define GPIO_ICR_GPIO_M 0x000000FF // GPIO Interrupt Clear
#define GPIO_ICR_GPIO_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_LOCK register.
//
//*****************************************************************************
#define GPIO_LOCK_M 0xFFFFFFFF // GPIO Lock
#define GPIO_LOCK_UNLOCKED 0x00000000 // The GPIOCR register is unlocked
// and may be modified
#define GPIO_LOCK_LOCKED 0x00000001 // The GPIOCR register is locked
// and may not be modified
#define GPIO_LOCK_KEY 0x4C4F434B // Unlocks the GPIO_CR register
//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_SI register.
//
//*****************************************************************************
#define GPIO_SI_SUM 0x00000001 // Summary Interrupt
//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_DR12R register.
//
//*****************************************************************************
#define GPIO_DR12R_DRV12_M 0x000000FF // Output Pad 12-mA Drive Enable
#define GPIO_DR12R_DRV12_12MA 0x00000001 // The corresponding GPIO pin has
// 12-mA drive. This encoding is
// only valid if the GPIOPP EDE bit
// is set and the appropriate
// GPIOPC EDM bit field is
// programmed to 0x3
//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_WAKEPEN register.
//
//*****************************************************************************
#define GPIO_WAKEPEN_WAKEP4 0x00000010 // P[4] Wake Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_WAKELVL register.
//
//*****************************************************************************
#define GPIO_WAKELVL_WAKELVL4 0x00000010 // P[4] Wake Level
//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_WAKESTAT
// register.
//
//*****************************************************************************
#define GPIO_WAKESTAT_STAT4 0x00000010 // P[4] Wake Status
//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_PP register.
//
//*****************************************************************************
#define GPIO_PP_EDE 0x00000001 // Extended Drive Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_PC register.
//
//*****************************************************************************
#define GPIO_PC_EDM7_M 0x0000C000 // Extended Drive Mode Bit 7
#define GPIO_PC_EDM6_M 0x00003000 // Extended Drive Mode Bit 6
#define GPIO_PC_EDM5_M 0x00000C00 // Extended Drive Mode Bit 5
#define GPIO_PC_EDM4_M 0x00000300 // Extended Drive Mode Bit 4
#define GPIO_PC_EDM3_M 0x000000C0 // Extended Drive Mode Bit 3
#define GPIO_PC_EDM2_M 0x00000030 // Extended Drive Mode Bit 2
#define GPIO_PC_EDM1_M 0x0000000C // Extended Drive Mode Bit 1
#define GPIO_PC_EDM0_M 0x00000003 // Extended Drive Mode Bit 0
#define GPIO_PC_EDM0_DISABLE 0x00000000 // Drive values of 2, 4 and 8 mA
// are maintained. GPIO n Drive
// Select (GPIODRnR) registers
// function as normal
#define GPIO_PC_EDM0_6MA 0x00000001 // An additional 6 mA option is
// provided
#define GPIO_PC_EDM0_PLUS2MA 0x00000003 // A 2 mA driver is always enabled;
// setting the corresponding
// GPIODR4R register bit adds 2 mA
// and setting the corresponding
// GPIODR8R of GPIODR12R register
// bit adds an additional 4 mA
#define GPIO_PC_EDM7_S 14
#define GPIO_PC_EDM6_S 12
#define GPIO_PC_EDM5_S 10
#define GPIO_PC_EDM4_S 8
#define GPIO_PC_EDM3_S 6
#define GPIO_PC_EDM2_S 4
#define GPIO_PC_EDM1_S 2
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EESIZE register.
//
//*****************************************************************************
#define EEPROM_EESIZE_BLKCNT_M 0x07FF0000 // Number of 16-Word Blocks
#define EEPROM_EESIZE_WORDCNT_M 0x0000FFFF // Number of 32-Bit Words
#define EEPROM_EESIZE_BLKCNT_S 16
#define EEPROM_EESIZE_WORDCNT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEBLOCK register.
//
//*****************************************************************************
#define EEPROM_EEBLOCK_BLOCK_M 0x0000FFFF // Current Block
#define EEPROM_EEBLOCK_BLOCK_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEOFFSET
// register.
//
//*****************************************************************************
#define EEPROM_EEOFFSET_OFFSET_M \
0x0000000F // Current Address Offset
#define EEPROM_EEOFFSET_OFFSET_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EERDWR register.
//
//*****************************************************************************
#define EEPROM_EERDWR_VALUE_M 0xFFFFFFFF // EEPROM Read or Write Data
#define EEPROM_EERDWR_VALUE_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EERDWRINC
// register.
//
//*****************************************************************************
#define EEPROM_EERDWRINC_VALUE_M \
0xFFFFFFFF // EEPROM Read or Write Data with
// Increment
#define EEPROM_EERDWRINC_VALUE_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEDONE register.
//
//*****************************************************************************
#define EEPROM_EEDONE_WRBUSY 0x00000020 // Write Busy
#define EEPROM_EEDONE_NOPERM 0x00000010 // Write Without Permission
#define EEPROM_EEDONE_WKCOPY 0x00000008 // Working on a Copy
#define EEPROM_EEDONE_WKERASE 0x00000004 // Working on an Erase
#define EEPROM_EEDONE_WORKING 0x00000001 // EEPROM Working
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EESUPP register.
//
//*****************************************************************************
#define EEPROM_EESUPP_PRETRY 0x00000008 // Programming Must Be Retried
#define EEPROM_EESUPP_ERETRY 0x00000004 // Erase Must Be Retried
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEUNLOCK
// register.
//
//*****************************************************************************
#define EEPROM_EEUNLOCK_UNLOCK_M \
0xFFFFFFFF // EEPROM Unlock
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEPROT register.
//
//*****************************************************************************
#define EEPROM_EEPROT_ACC 0x00000008 // Access Control
#define EEPROM_EEPROT_PROT_M 0x00000007 // Protection Control
#define EEPROM_EEPROT_PROT_RWNPW \
0x00000000 // This setting is the default. If
// there is no password, the block
// is not protected and is readable
// and writable
#define EEPROM_EEPROT_PROT_RWPW 0x00000001 // If there is a password, the
// block is readable or writable
// only when unlocked
#define EEPROM_EEPROT_PROT_RONPW \
0x00000002 // If there is no password, the
// block is readable, not writable
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEPASS0 register.
//
//*****************************************************************************
#define EEPROM_EEPASS0_PASS_M 0xFFFFFFFF // Password
#define EEPROM_EEPASS0_PASS_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEPASS1 register.
//
//*****************************************************************************
#define EEPROM_EEPASS1_PASS_M 0xFFFFFFFF // Password
#define EEPROM_EEPASS1_PASS_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEPASS2 register.
//
//*****************************************************************************
#define EEPROM_EEPASS2_PASS_M 0xFFFFFFFF // Password
#define EEPROM_EEPASS2_PASS_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEINT register.
//
//*****************************************************************************
#define EEPROM_EEINT_INT 0x00000001 // Interrupt Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEHIDE0 register.
//
//*****************************************************************************
#define EEPROM_EEHIDE0_HN_M 0xFFFFFFFE // Hide Block
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEHIDE1 register.
//
//*****************************************************************************
#define EEPROM_EEHIDE1_HN_M 0xFFFFFFFF // Hide Block
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEHIDE2 register.
//
//*****************************************************************************
#define EEPROM_EEHIDE2_HN_M 0xFFFFFFFF // Hide Block
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEDBGME register.
//
//*****************************************************************************
#define EEPROM_EEDBGME_KEY_M 0xFFFF0000 // Erase Key
#define EEPROM_EEDBGME_ME 0x00000001 // Mass Erase
#define EEPROM_EEDBGME_KEY_S 16
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_PP register.
//
//*****************************************************************************
#define EEPROM_PP_SIZE_M 0x0000FFFF // EEPROM Size
#define EEPROM_PP_SIZE_64 0x00000000 // 64 bytes of EEPROM
#define EEPROM_PP_SIZE_128 0x00000001 // 128 bytes of EEPROM
#define EEPROM_PP_SIZE_256 0x00000003 // 256 bytes of EEPROM
#define EEPROM_PP_SIZE_512 0x00000007 // 512 bytes of EEPROM
#define EEPROM_PP_SIZE_1K 0x0000000F // 1 KB of EEPROM
#define EEPROM_PP_SIZE_2K 0x0000001F // 2 KB of EEPROM
#define EEPROM_PP_SIZE_3K 0x0000003F // 3 KB of EEPROM
#define EEPROM_PP_SIZE_4K 0x0000007F // 4 KB of EEPROM
#define EEPROM_PP_SIZE_5K 0x000000FF // 5 KB of EEPROM
#define EEPROM_PP_SIZE_6K 0x000001FF // 6 KB of EEPROM
//*****************************************************************************
//
// The following are defines for the bit fields in the ONEWIRE_O_CS register.
//
//*****************************************************************************
#define ONEWIRE_CS_USEALT 0x80000000 // Two Wire Enable
#define ONEWIRE_CS_ALTP 0x40000000 // Alternate Polarity Enable
#define ONEWIRE_CS_BSIZE_M 0x00070000 // Last Byte Size
#define ONEWIRE_CS_BSIZE_8 0x00000000 // 8 bits (1 byte)
#define ONEWIRE_CS_BSIZE_1 0x00010000 // 1 bit
#define ONEWIRE_CS_BSIZE_2 0x00020000 // 2 bits
#define ONEWIRE_CS_BSIZE_3 0x00030000 // 3 bits
#define ONEWIRE_CS_BSIZE_4 0x00040000 // 4 bits
#define ONEWIRE_CS_BSIZE_5 0x00050000 // 5 bits
#define ONEWIRE_CS_BSIZE_6 0x00060000 // 6 bits
#define ONEWIRE_CS_BSIZE_7 0x00070000 // 7 bits
#define ONEWIRE_CS_STUCK 0x00000400 // STUCK Status
#define ONEWIRE_CS_NOATR 0x00000200 // Answer-to-Reset Status
#define ONEWIRE_CS_BUSY 0x00000100 // Busy Status
#define ONEWIRE_CS_SKATR 0x00000080 // Skip Answer-to-Reset Enable
#define ONEWIRE_CS_LSAM 0x00000040 // Late Sample Enable
#define ONEWIRE_CS_ODRV 0x00000020 // Overdrive Enable
#define ONEWIRE_CS_SZ_M 0x00000018 // Data Operation Size
#define ONEWIRE_CS_OP_M 0x00000006 // Operation Request
#define ONEWIRE_CS_OP_NONE 0x00000000 // No operation
#define ONEWIRE_CS_OP_RD 0x00000002 // Read
#define ONEWIRE_CS_OP_WR 0x00000004 // Write
#define ONEWIRE_CS_OP_WRRD 0x00000006 // Write/Read
#define ONEWIRE_CS_RST 0x00000001 // Reset Request
#define ONEWIRE_CS_SZ_S 3
//*****************************************************************************
//
// The following are defines for the bit fields in the ONEWIRE_O_TIM register.
//
//*****************************************************************************
#define ONEWIRE_TIM_W1TIM_M 0xF0000000 // Value '1' Timing
#define ONEWIRE_TIM_W0TIM_M 0x0F800000 // Value '0' Timing
#define ONEWIRE_TIM_W0REST_M 0x00780000 // Rest Time
#define ONEWIRE_TIM_W1SAM_M 0x00078000 // Sample Time
#define ONEWIRE_TIM_ATRSAM_M 0x00007800 // Answer-to-Reset Sample
#define ONEWIRE_TIM_ATRTIM_M 0x000007C0 // Answer-to-Reset/Rest Period
#define ONEWIRE_TIM_RSTTIM_M 0x0000003F // Reset Low Time
#define ONEWIRE_TIM_W1TIM_S 28
#define ONEWIRE_TIM_W0TIM_S 23
#define ONEWIRE_TIM_W0REST_S 19
#define ONEWIRE_TIM_W1SAM_S 15
#define ONEWIRE_TIM_ATRSAM_S 11
#define ONEWIRE_TIM_ATRTIM_S 6
#define ONEWIRE_TIM_RSTTIM_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ONEWIRE_O_DATW register.
//
//*****************************************************************************
#define ONEWIRE_DATW_B3_M 0xFF000000 // Upper Data Byte
#define ONEWIRE_DATW_B2_M 0x00FF0000 // Upper Middle Data Byte
#define ONEWIRE_DATW_B1_M 0x0000FF00 // Lower Middle Data Byte
#define ONEWIRE_DATW_B0_M 0x000000FF // Lowest Data Byte
#define ONEWIRE_DATW_B3_S 24
#define ONEWIRE_DATW_B2_S 16
#define ONEWIRE_DATW_B1_S 8
#define ONEWIRE_DATW_B0_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ONEWIRE_O_DATR register.
//
//*****************************************************************************
#define ONEWIRE_DATR_B3_M 0xFF000000 // Upper Data Byte
#define ONEWIRE_DATR_B2_M 0x00FF0000 // Upper Middle Data Byte
#define ONEWIRE_DATR_B1_M 0x0000FF00 // Lower Middle Data Byte
#define ONEWIRE_DATR_B0_M 0x000000FF // Lowest Data Byte
#define ONEWIRE_DATR_B3_S 24
#define ONEWIRE_DATR_B2_S 16
#define ONEWIRE_DATR_B1_S 8
#define ONEWIRE_DATR_B0_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ONEWIRE_O_IM register.
//
//*****************************************************************************
#define ONEWIRE_IM_DMA 0x00000010 // DMA Done Interrupt Mask
#define ONEWIRE_IM_STUCK 0x00000008 // Stuck Status Interrupt Mask
#define ONEWIRE_IM_NOATR 0x00000004 // No Answer-to-Reset Interrupt
// Mask
#define ONEWIRE_IM_OPC 0x00000002 // Operation Complete Interrupt
// Mask
#define ONEWIRE_IM_RST 0x00000001 // Reset Interrupt Mask
//*****************************************************************************
//
// The following are defines for the bit fields in the ONEWIRE_O_RIS register.
//
//*****************************************************************************
#define ONEWIRE_RIS_DMA 0x00000010 // DMA Done Raw Interrupt Status
#define ONEWIRE_RIS_STUCK 0x00000008 // Stuck Status Raw Interrupt
// Status
#define ONEWIRE_RIS_NOATR 0x00000004 // No Answer-to-Reset Raw Interrupt
// Status
#define ONEWIRE_RIS_OPC 0x00000002 // Operation Complete Raw Interrupt
// Status
#define ONEWIRE_RIS_RST 0x00000001 // Reset Raw Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the ONEWIRE_O_MIS register.
//
//*****************************************************************************
#define ONEWIRE_MIS_DMA 0x00000010 // DMA Done Masked Interrupt Status
#define ONEWIRE_MIS_STUCK 0x00000008 // Stuck Status Masked Interrupt
// Status
#define ONEWIRE_MIS_NOATR 0x00000004 // No Answer-to-Reset Masked
// Interrupt Status
#define ONEWIRE_MIS_OPC 0x00000002 // Operation Complete Masked
// Interrupt Status
#define ONEWIRE_MIS_RST 0x00000001 // Reset Interrupt Mask
//*****************************************************************************
//
// The following are defines for the bit fields in the ONEWIRE_O_ICR register.
//
//*****************************************************************************
#define ONEWIRE_ICR_DMA 0x00000010 // DMA Done Interrupt Clear
#define ONEWIRE_ICR_STUCK 0x00000008 // Stuck Status Interrupt Clear
#define ONEWIRE_ICR_NOATR 0x00000004 // No Answer-to-Reset Interrupt
// Clear
#define ONEWIRE_ICR_OPC 0x00000002 // Operation Complete Interrupt
// Clear
#define ONEWIRE_ICR_RST 0x00000001 // Reset Interrupt Clear
//*****************************************************************************
//
// The following are defines for the bit fields in the ONEWIRE_O_DMA register.
//
//*****************************************************************************
#define ONEWIRE_DMA_SG 0x00000008 // Scatter-Gather Enable
#define ONEWIRE_DMA_DMAOP_M 0x00000006 // uDMA Operation
#define ONEWIRE_DMA_DMAOP_DIS 0x00000000 // uDMA disabled
#define ONEWIRE_DMA_DMAOP_RDSNG 0x00000002 // uDMA single read: 1-Wire
// requests uDMA to read
// ONEWIREDATR register after each
// read transaction
#define ONEWIRE_DMA_DMAOP_WRMUL 0x00000004 // uDMA multiple write: 1-Wire
// requests uDMA to load whenever
// the ONEWIREDATW register is
// empty
#define ONEWIRE_DMA_DMAOP_RDMUL 0x00000006 // uDMA multiple read: An initial
// read occurs and subsequent reads
// start after uDMA has read the
// ONEWIREDATR register
#define ONEWIRE_DMA_RST 0x00000001 // uDMA Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the ONEWIRE_O_PP register.
//
//*****************************************************************************
#define ONEWIRE_PP_DMAP 0x00000010 // uDMA Present
#define ONEWIRE_PP_CNT_M 0x00000003 // 1-Wire Bus Count
#define ONEWIRE_PP_CNT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_CFG register.
//
//*****************************************************************************
#define EPI_CFG_INTDIV 0x00000100 // Integer Clock Divider Enable
#define EPI_CFG_BLKEN 0x00000010 // Block Enable
#define EPI_CFG_MODE_M 0x0000000F // Mode Select
#define EPI_CFG_MODE_NONE 0x00000000 // General Purpose
#define EPI_CFG_MODE_SDRAM 0x00000001 // SDRAM
#define EPI_CFG_MODE_HB8 0x00000002 // 8-Bit Host-Bus (HB8)
#define EPI_CFG_MODE_HB16 0x00000003 // 16-Bit Host-Bus (HB16)
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_BAUD register.
//
//*****************************************************************************
#define EPI_BAUD_COUNT1_M 0xFFFF0000 // Baud Rate Counter 1
#define EPI_BAUD_COUNT0_M 0x0000FFFF // Baud Rate Counter 0
#define EPI_BAUD_COUNT1_S 16
#define EPI_BAUD_COUNT0_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_BAUD2 register.
//
//*****************************************************************************
#define EPI_BAUD2_COUNT1_M 0xFFFF0000 // CS3n Baud Rate Counter 1
#define EPI_BAUD2_COUNT0_M 0x0000FFFF // CS2n Baud Rate Counter 0
#define EPI_BAUD2_COUNT1_S 16
#define EPI_BAUD2_COUNT0_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_HB16CFG register.
//
//*****************************************************************************
#define EPI_HB16CFG_CLKGATE 0x80000000 // Clock Gated
#define EPI_HB16CFG_CLKGATEI 0x40000000 // Clock Gated Idle
#define EPI_HB16CFG_CLKINV 0x20000000 // Invert Output Clock Enable
#define EPI_HB16CFG_RDYEN 0x10000000 // Input Ready Enable
#define EPI_HB16CFG_IRDYINV 0x08000000 // Input Ready Invert
#define EPI_HB16CFG_XFFEN 0x00800000 // External FIFO FULL Enable
#define EPI_HB16CFG_XFEEN 0x00400000 // External FIFO EMPTY Enable
#define EPI_HB16CFG_WRHIGH 0x00200000 // WRITE Strobe Polarity
#define EPI_HB16CFG_RDHIGH 0x00100000 // READ Strobe Polarity
#define EPI_HB16CFG_ALEHIGH 0x00080000 // ALE Strobe Polarity
#define EPI_HB16CFG_WRCRE 0x00040000 // PSRAM Configuration Register
// Write
#define EPI_HB16CFG_RDCRE 0x00020000 // PSRAM Configuration Register
// Read
#define EPI_HB16CFG_BURST 0x00010000 // Burst Mode
#define EPI_HB16CFG_MAXWAIT_M 0x0000FF00 // Maximum Wait
#define EPI_HB16CFG_WRWS_M 0x000000C0 // Write Wait States
#define EPI_HB16CFG_WRWS_2 0x00000000 // Active WRn is 2 EPI clocks
#define EPI_HB16CFG_WRWS_4 0x00000040 // Active WRn is 4 EPI clocks
#define EPI_HB16CFG_WRWS_6 0x00000080 // Active WRn is 6 EPI clocks
#define EPI_HB16CFG_WRWS_8 0x000000C0 // Active WRn is 8 EPI clocks
#define EPI_HB16CFG_RDWS_M 0x00000030 // Read Wait States
#define EPI_HB16CFG_RDWS_2 0x00000000 // Active RDn is 2 EPI clocks
#define EPI_HB16CFG_RDWS_4 0x00000010 // Active RDn is 4 EPI clocks
#define EPI_HB16CFG_RDWS_6 0x00000020 // Active RDn is 6 EPI clocks
#define EPI_HB16CFG_RDWS_8 0x00000030 // Active RDn is 8 EPI clocks
#define EPI_HB16CFG_BSEL 0x00000004 // Byte Select Configuration
#define EPI_HB16CFG_MODE_M 0x00000003 // Host Bus Sub-Mode
#define EPI_HB16CFG_MODE_ADMUX 0x00000000 // ADMUX - AD[15:0]
#define EPI_HB16CFG_MODE_ADNMUX 0x00000001 // ADNONMUX - D[15:0]
#define EPI_HB16CFG_MODE_SRAM 0x00000002 // Continuous Read - D[15:0]
#define EPI_HB16CFG_MODE_XFIFO 0x00000003 // XFIFO - D[15:0]
#define EPI_HB16CFG_MAXWAIT_S 8
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_GPCFG register.
//
//*****************************************************************************
#define EPI_GPCFG_CLKPIN 0x80000000 // Clock Pin
#define EPI_GPCFG_CLKGATE 0x40000000 // Clock Gated
#define EPI_GPCFG_FRM50 0x04000000 // 50/50 Frame
#define EPI_GPCFG_FRMCNT_M 0x03C00000 // Frame Count
#define EPI_GPCFG_WR2CYC 0x00080000 // 2-Cycle Writes
#define EPI_GPCFG_ASIZE_M 0x00000030 // Address Bus Size
#define EPI_GPCFG_ASIZE_NONE 0x00000000 // No address
#define EPI_GPCFG_ASIZE_4BIT 0x00000010 // Up to 4 bits wide
#define EPI_GPCFG_ASIZE_12BIT 0x00000020 // Up to 12 bits wide. This size
// cannot be used with 24-bit data
#define EPI_GPCFG_ASIZE_20BIT 0x00000030 // Up to 20 bits wide. This size
// cannot be used with data sizes
// other than 8
#define EPI_GPCFG_DSIZE_M 0x00000003 // Size of Data Bus
#define EPI_GPCFG_DSIZE_4BIT 0x00000000 // 8 Bits Wide (EPI0S0 to EPI0S7)
#define EPI_GPCFG_DSIZE_16BIT 0x00000001 // 16 Bits Wide (EPI0S0 to EPI0S15)
#define EPI_GPCFG_DSIZE_24BIT 0x00000002 // 24 Bits Wide (EPI0S0 to EPI0S23)
#define EPI_GPCFG_DSIZE_32BIT 0x00000003 // 32 Bits Wide (EPI0S0 to EPI0S31)
#define EPI_GPCFG_FRMCNT_S 22
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_SDRAMCFG register.
//
//*****************************************************************************
#define EPI_SDRAMCFG_FREQ_M 0xC0000000 // EPI Frequency Range
#define EPI_SDRAMCFG_FREQ_NONE 0x00000000 // 0 - 15 MHz
#define EPI_SDRAMCFG_FREQ_15MHZ 0x40000000 // 15 - 30 MHz
#define EPI_SDRAMCFG_FREQ_30MHZ 0x80000000 // 30 - 50 MHz
#define EPI_SDRAMCFG_RFSH_M 0x07FF0000 // Refresh Counter
#define EPI_SDRAMCFG_SLEEP 0x00000200 // Sleep Mode
#define EPI_SDRAMCFG_SIZE_M 0x00000003 // Size of SDRAM
#define EPI_SDRAMCFG_SIZE_8MB 0x00000000 // 64 megabits (8MB)
#define EPI_SDRAMCFG_SIZE_16MB 0x00000001 // 128 megabits (16MB)
#define EPI_SDRAMCFG_SIZE_32MB 0x00000002 // 256 megabits (32MB)
#define EPI_SDRAMCFG_SIZE_64MB 0x00000003 // 512 megabits (64MB)
#define EPI_SDRAMCFG_RFSH_S 16
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_HB8CFG register.
//
//*****************************************************************************
#define EPI_HB8CFG_CLKGATE 0x80000000 // Clock Gated
#define EPI_HB8CFG_CLKGATEI 0x40000000 // Clock Gated when Idle
#define EPI_HB8CFG_CLKINV 0x20000000 // Invert Output Clock Enable
#define EPI_HB8CFG_RDYEN 0x10000000 // Input Ready Enable
#define EPI_HB8CFG_IRDYINV 0x08000000 // Input Ready Invert
#define EPI_HB8CFG_XFFEN 0x00800000 // External FIFO FULL Enable
#define EPI_HB8CFG_XFEEN 0x00400000 // External FIFO EMPTY Enable
#define EPI_HB8CFG_WRHIGH 0x00200000 // WRITE Strobe Polarity
#define EPI_HB8CFG_RDHIGH 0x00100000 // READ Strobe Polarity
#define EPI_HB8CFG_ALEHIGH 0x00080000 // ALE Strobe Polarity
#define EPI_HB8CFG_MAXWAIT_M 0x0000FF00 // Maximum Wait
#define EPI_HB8CFG_WRWS_M 0x000000C0 // Write Wait States
#define EPI_HB8CFG_WRWS_2 0x00000000 // Active WRn is 2 EPI clocks
#define EPI_HB8CFG_WRWS_4 0x00000040 // Active WRn is 4 EPI clocks
#define EPI_HB8CFG_WRWS_6 0x00000080 // Active WRn is 6 EPI clocks
#define EPI_HB8CFG_WRWS_8 0x000000C0 // Active WRn is 8 EPI clocks
#define EPI_HB8CFG_RDWS_M 0x00000030 // Read Wait States
#define EPI_HB8CFG_RDWS_2 0x00000000 // Active RDn is 2 EPI clocks
#define EPI_HB8CFG_RDWS_4 0x00000010 // Active RDn is 4 EPI clocks
#define EPI_HB8CFG_RDWS_6 0x00000020 // Active RDn is 6 EPI clocks
#define EPI_HB8CFG_RDWS_8 0x00000030 // Active RDn is 8 EPI clocks
#define EPI_HB8CFG_MODE_M 0x00000003 // Host Bus Sub-Mode
#define EPI_HB8CFG_MODE_MUX 0x00000000 // ADMUX - AD[7:0]
#define EPI_HB8CFG_MODE_NMUX 0x00000001 // ADNONMUX - D[7:0]
#define EPI_HB8CFG_MODE_SRAM 0x00000002 // Continuous Read - D[7:0]
#define EPI_HB8CFG_MODE_FIFO 0x00000003 // XFIFO - D[7:0]
#define EPI_HB8CFG_MAXWAIT_S 8
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_HB8CFG2 register.
//
//*****************************************************************************
#define EPI_HB8CFG2_CSCFGEXT 0x08000000 // Chip Select Extended
// Configuration
#define EPI_HB8CFG2_CSBAUD 0x04000000 // Chip Select Baud Rate and
// Multiple Sub-Mode Configuration
// enable
#define EPI_HB8CFG2_CSCFG_M 0x03000000 // Chip Select Configuration
#define EPI_HB8CFG2_CSCFG_ALE 0x00000000 // ALE Configuration
#define EPI_HB8CFG2_CSCFG_CS 0x01000000 // CSn Configuration
#define EPI_HB8CFG2_CSCFG_DCS 0x02000000 // Dual CSn Configuration
#define EPI_HB8CFG2_CSCFG_ADCS 0x03000000 // ALE with Dual CSn Configuration
#define EPI_HB8CFG2_WRHIGH 0x00200000 // CS1n WRITE Strobe Polarity
#define EPI_HB8CFG2_RDHIGH 0x00100000 // CS1n READ Strobe Polarity
#define EPI_HB8CFG2_ALEHIGH 0x00080000 // CS1n ALE Strobe Polarity
#define EPI_HB8CFG2_WRWS_M 0x000000C0 // CS1n Write Wait States
#define EPI_HB8CFG2_WRWS_2 0x00000000 // Active WRn is 2 EPI clocks
#define EPI_HB8CFG2_WRWS_4 0x00000040 // Active WRn is 4 EPI clocks
#define EPI_HB8CFG2_WRWS_6 0x00000080 // Active WRn is 6 EPI clocks
#define EPI_HB8CFG2_WRWS_8 0x000000C0 // Active WRn is 8 EPI clocks
#define EPI_HB8CFG2_RDWS_M 0x00000030 // CS1n Read Wait States
#define EPI_HB8CFG2_RDWS_2 0x00000000 // Active RDn is 2 EPI clocks
#define EPI_HB8CFG2_RDWS_4 0x00000010 // Active RDn is 4 EPI clocks
#define EPI_HB8CFG2_RDWS_6 0x00000020 // Active RDn is 6 EPI clocks
#define EPI_HB8CFG2_RDWS_8 0x00000030 // Active RDn is 8 EPI clocks
#define EPI_HB8CFG2_MODE_M 0x00000003 // CS1n Host Bus Sub-Mode
#define EPI_HB8CFG2_MODE_ADMUX 0x00000000 // ADMUX - AD[7:0]
#define EPI_HB8CFG2_MODE_AD 0x00000001 // ADNONMUX - D[7:0]
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_HB16CFG2 register.
//
//*****************************************************************************
#define EPI_HB16CFG2_CSCFGEXT 0x08000000 // Chip Select Extended
// Configuration
#define EPI_HB16CFG2_CSBAUD 0x04000000 // Chip Select Baud Rate and
// Multiple Sub-Mode Configuration
// enable
#define EPI_HB16CFG2_CSCFG_M 0x03000000 // Chip Select Configuration
#define EPI_HB16CFG2_CSCFG_ALE 0x00000000 // ALE Configuration
#define EPI_HB16CFG2_CSCFG_CS 0x01000000 // CSn Configuration
#define EPI_HB16CFG2_CSCFG_DCS 0x02000000 // Dual CSn Configuration
#define EPI_HB16CFG2_CSCFG_ADCS 0x03000000 // ALE with Dual CSn Configuration
#define EPI_HB16CFG2_WRHIGH 0x00200000 // CS1n WRITE Strobe Polarity
#define EPI_HB16CFG2_RDHIGH 0x00100000 // CS1n READ Strobe Polarity
#define EPI_HB16CFG2_ALEHIGH 0x00080000 // CS1n ALE Strobe Polarity
#define EPI_HB16CFG2_WRCRE 0x00040000 // CS1n PSRAM Configuration
// Register Write
#define EPI_HB16CFG2_RDCRE 0x00020000 // CS1n PSRAM Configuration
// Register Read
#define EPI_HB16CFG2_BURST 0x00010000 // CS1n Burst Mode
#define EPI_HB16CFG2_WRWS_M 0x000000C0 // CS1n Write Wait States
#define EPI_HB16CFG2_WRWS_2 0x00000000 // Active WRn is 2 EPI clocks
#define EPI_HB16CFG2_WRWS_4 0x00000040 // Active WRn is 4 EPI clocks
#define EPI_HB16CFG2_WRWS_6 0x00000080 // Active WRn is 6 EPI clocks
#define EPI_HB16CFG2_WRWS_8 0x000000C0 // Active WRn is 8 EPI clocks
#define EPI_HB16CFG2_RDWS_M 0x00000030 // CS1n Read Wait States
#define EPI_HB16CFG2_RDWS_2 0x00000000 // Active RDn is 2 EPI clocks
#define EPI_HB16CFG2_RDWS_4 0x00000010 // Active RDn is 4 EPI clocks
#define EPI_HB16CFG2_RDWS_6 0x00000020 // Active RDn is 6 EPI clocks
#define EPI_HB16CFG2_RDWS_8 0x00000030 // Active RDn is 8 EPI clocks
#define EPI_HB16CFG2_MODE_M 0x00000003 // CS1n Host Bus Sub-Mode
#define EPI_HB16CFG2_MODE_ADMUX 0x00000000 // ADMUX - AD[15:0]
#define EPI_HB16CFG2_MODE_AD 0x00000001 // ADNONMUX - D[15:0]
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_ADDRMAP register.
//
//*****************************************************************************
#define EPI_ADDRMAP_ECSZ_M 0x00000C00 // External Code Size
#define EPI_ADDRMAP_ECSZ_256B 0x00000000 // 256 bytes; lower address range:
// 0x00 to 0xFF
#define EPI_ADDRMAP_ECSZ_64KB 0x00000400 // 64 KB; lower address range:
// 0x0000 to 0xFFFF
#define EPI_ADDRMAP_ECSZ_16MB 0x00000800 // 16 MB; lower address range:
// 0x00.0000 to 0xFF.FFFF
#define EPI_ADDRMAP_ECSZ_256MB 0x00000C00 // 256MB; lower address range:
// 0x000.0000 to 0x0FFF.FFFF
#define EPI_ADDRMAP_ECADR_M 0x00000300 // External Code Address
#define EPI_ADDRMAP_ECADR_NONE 0x00000000 // Not mapped
#define EPI_ADDRMAP_ECADR_1000 0x00000100 // At 0x1000.0000
#define EPI_ADDRMAP_EPSZ_M 0x000000C0 // External Peripheral Size
#define EPI_ADDRMAP_EPSZ_256B 0x00000000 // 256 bytes; lower address range:
// 0x00 to 0xFF
#define EPI_ADDRMAP_EPSZ_64KB 0x00000040 // 64 KB; lower address range:
// 0x0000 to 0xFFFF
#define EPI_ADDRMAP_EPSZ_16MB 0x00000080 // 16 MB; lower address range:
// 0x00.0000 to 0xFF.FFFF
#define EPI_ADDRMAP_EPSZ_256MB 0x000000C0 // 256 MB; lower address range:
// 0x000.0000 to 0xFFF.FFFF
#define EPI_ADDRMAP_EPADR_M 0x00000030 // External Peripheral Address
#define EPI_ADDRMAP_EPADR_NONE 0x00000000 // Not mapped
#define EPI_ADDRMAP_EPADR_A000 0x00000010 // At 0xA000.0000
#define EPI_ADDRMAP_EPADR_C000 0x00000020 // At 0xC000.0000
#define EPI_ADDRMAP_EPADR_HBQS 0x00000030 // Only to be used with Host Bus
// quad chip select. In quad chip
// select mode, CS2n maps to
// 0xA000.0000 and CS3n maps to
// 0xC000.0000
#define EPI_ADDRMAP_ERSZ_M 0x0000000C // External RAM Size
#define EPI_ADDRMAP_ERSZ_256B 0x00000000 // 256 bytes; lower address range:
// 0x00 to 0xFF
#define EPI_ADDRMAP_ERSZ_64KB 0x00000004 // 64 KB; lower address range:
// 0x0000 to 0xFFFF
#define EPI_ADDRMAP_ERSZ_16MB 0x00000008 // 16 MB; lower address range:
// 0x00.0000 to 0xFF.FFFF
#define EPI_ADDRMAP_ERSZ_256MB 0x0000000C // 256 MB; lower address range:
// 0x000.0000 to 0xFFF.FFFF
#define EPI_ADDRMAP_ERADR_M 0x00000003 // External RAM Address
#define EPI_ADDRMAP_ERADR_NONE 0x00000000 // Not mapped
#define EPI_ADDRMAP_ERADR_6000 0x00000001 // At 0x6000.0000
#define EPI_ADDRMAP_ERADR_8000 0x00000002 // At 0x8000.0000
#define EPI_ADDRMAP_ERADR_HBQS 0x00000003 // Only to be used with Host Bus
// quad chip select. In quad chip
// select mode, CS0n maps to
// 0x6000.0000 and CS1n maps to
// 0x8000.0000
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_RSIZE0 register.
//
//*****************************************************************************
#define EPI_RSIZE0_SIZE_M 0x00000003 // Current Size
#define EPI_RSIZE0_SIZE_8BIT 0x00000001 // Byte (8 bits)
#define EPI_RSIZE0_SIZE_16BIT 0x00000002 // Half-word (16 bits)
#define EPI_RSIZE0_SIZE_32BIT 0x00000003 // Word (32 bits)
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_RADDR0 register.
//
//*****************************************************************************
#define EPI_RADDR0_ADDR_M 0xFFFFFFFF // Current Address
#define EPI_RADDR0_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_RPSTD0 register.
//
//*****************************************************************************
#define EPI_RPSTD0_POSTCNT_M 0x00001FFF // Post Count
#define EPI_RPSTD0_POSTCNT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_RSIZE1 register.
//
//*****************************************************************************
#define EPI_RSIZE1_SIZE_M 0x00000003 // Current Size
#define EPI_RSIZE1_SIZE_8BIT 0x00000001 // Byte (8 bits)
#define EPI_RSIZE1_SIZE_16BIT 0x00000002 // Half-word (16 bits)
#define EPI_RSIZE1_SIZE_32BIT 0x00000003 // Word (32 bits)
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_RADDR1 register.
//
//*****************************************************************************
#define EPI_RADDR1_ADDR_M 0xFFFFFFFF // Current Address
#define EPI_RADDR1_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_RPSTD1 register.
//
//*****************************************************************************
#define EPI_RPSTD1_POSTCNT_M 0x00001FFF // Post Count
#define EPI_RPSTD1_POSTCNT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_STAT register.
//
//*****************************************************************************
#define EPI_STAT_XFFULL 0x00000100 // External FIFO Full
#define EPI_STAT_XFEMPTY 0x00000080 // External FIFO Empty
#define EPI_STAT_INITSEQ 0x00000040 // Initialization Sequence
#define EPI_STAT_WBUSY 0x00000020 // Write Busy
#define EPI_STAT_NBRBUSY 0x00000010 // Non-Blocking Read Busy
#define EPI_STAT_ACTIVE 0x00000001 // Register Active
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_RFIFOCNT register.
//
//*****************************************************************************
#define EPI_RFIFOCNT_COUNT_M 0x0000000F // FIFO Count
#define EPI_RFIFOCNT_COUNT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_READFIFO0
// register.
//
//*****************************************************************************
#define EPI_READFIFO0_DATA_M 0xFFFFFFFF // Reads Data
#define EPI_READFIFO0_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_READFIFO1
// register.
//
//*****************************************************************************
#define EPI_READFIFO1_DATA_M 0xFFFFFFFF // Reads Data
#define EPI_READFIFO1_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_READFIFO2
// register.
//
//*****************************************************************************
#define EPI_READFIFO2_DATA_M 0xFFFFFFFF // Reads Data
#define EPI_READFIFO2_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_READFIFO3
// register.
//
//*****************************************************************************
#define EPI_READFIFO3_DATA_M 0xFFFFFFFF // Reads Data
#define EPI_READFIFO3_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_READFIFO4
// register.
//
//*****************************************************************************
#define EPI_READFIFO4_DATA_M 0xFFFFFFFF // Reads Data
#define EPI_READFIFO4_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_READFIFO5
// register.
//
//*****************************************************************************
#define EPI_READFIFO5_DATA_M 0xFFFFFFFF // Reads Data
#define EPI_READFIFO5_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_READFIFO6
// register.
//
//*****************************************************************************
#define EPI_READFIFO6_DATA_M 0xFFFFFFFF // Reads Data
#define EPI_READFIFO6_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_READFIFO7
// register.
//
//*****************************************************************************
#define EPI_READFIFO7_DATA_M 0xFFFFFFFF // Reads Data
#define EPI_READFIFO7_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_FIFOLVL register.
//
//*****************************************************************************
#define EPI_FIFOLVL_WFERR 0x00020000 // Write Full Error
#define EPI_FIFOLVL_RSERR 0x00010000 // Read Stall Error
#define EPI_FIFOLVL_WRFIFO_M 0x00000070 // Write FIFO
#define EPI_FIFOLVL_WRFIFO_EMPT 0x00000000 // Interrupt is triggered while
// WRFIFO is empty.
#define EPI_FIFOLVL_WRFIFO_2 0x00000020 // Interrupt is triggered until
// there are only two slots
// available. Thus, trigger is
// deasserted when there are two
// WRFIFO entries present. This
// configuration is optimized for
// bursts of 2
#define EPI_FIFOLVL_WRFIFO_1 0x00000030 // Interrupt is triggered until
// there is one WRFIFO entry
// available. This configuration
// expects only single writes
#define EPI_FIFOLVL_WRFIFO_NFULL \
0x00000040 // Trigger interrupt when WRFIFO is
// not full, meaning trigger will
// continue to assert until there
// are four entries in the WRFIFO
#define EPI_FIFOLVL_RDFIFO_M 0x00000007 // Read FIFO
#define EPI_FIFOLVL_RDFIFO_1 0x00000001 // Trigger when there are 1 or more
// entries in the NBRFIFO
#define EPI_FIFOLVL_RDFIFO_2 0x00000002 // Trigger when there are 2 or more
// entries in the NBRFIFO
#define EPI_FIFOLVL_RDFIFO_4 0x00000003 // Trigger when there are 4 or more
// entries in the NBRFIFO
#define EPI_FIFOLVL_RDFIFO_6 0x00000004 // Trigger when there are 6 or more
// entries in the NBRFIFO
#define EPI_FIFOLVL_RDFIFO_7 0x00000005 // Trigger when there are 7 or more
// entries in the NBRFIFO
#define EPI_FIFOLVL_RDFIFO_8 0x00000006 // Trigger when there are 8 entries
// in the NBRFIFO
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_WFIFOCNT register.
//
//*****************************************************************************
#define EPI_WFIFOCNT_WTAV_M 0x00000007 // Available Write Transactions
#define EPI_WFIFOCNT_WTAV_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_DMATXCNT register.
//
//*****************************************************************************
#define EPI_DMATXCNT_TXCNT_M 0x0000FFFF // DMA Count
#define EPI_DMATXCNT_TXCNT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_IM register.
//
//*****************************************************************************
#define EPI_IM_DMAWRIM 0x00000010 // Write uDMA Interrupt Mask
#define EPI_IM_DMARDIM 0x00000008 // Read uDMA Interrupt Mask
#define EPI_IM_WRIM 0x00000004 // Write FIFO Empty Interrupt Mask
#define EPI_IM_RDIM 0x00000002 // Read FIFO Full Interrupt Mask
#define EPI_IM_ERRIM 0x00000001 // Error Interrupt Mask
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_RIS register.
//
//*****************************************************************************
#define EPI_RIS_DMAWRRIS 0x00000010 // Write uDMA Raw Interrupt Status
#define EPI_RIS_DMARDRIS 0x00000008 // Read uDMA Raw Interrupt Status
#define EPI_RIS_WRRIS 0x00000004 // Write Raw Interrupt Status
#define EPI_RIS_RDRIS 0x00000002 // Read Raw Interrupt Status
#define EPI_RIS_ERRRIS 0x00000001 // Error Raw Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_MIS register.
//
//*****************************************************************************
#define EPI_MIS_DMAWRMIS 0x00000010 // Write uDMA Masked Interrupt
// Status
#define EPI_MIS_DMARDMIS 0x00000008 // Read uDMA Masked Interrupt
// Status
#define EPI_MIS_WRMIS 0x00000004 // Write Masked Interrupt Status
#define EPI_MIS_RDMIS 0x00000002 // Read Masked Interrupt Status
#define EPI_MIS_ERRMIS 0x00000001 // Error Masked Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_EISC register.
//
//*****************************************************************************
#define EPI_EISC_DMAWRIC 0x00000010 // Write uDMA Interrupt Clear
#define EPI_EISC_DMARDIC 0x00000008 // Read uDMA Interrupt Clear
#define EPI_EISC_WTFULL 0x00000004 // Write FIFO Full Error
#define EPI_EISC_RSTALL 0x00000002 // Read Stalled Error
#define EPI_EISC_TOUT 0x00000001 // Timeout Error
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_HB8CFG3 register.
//
//*****************************************************************************
#define EPI_HB8CFG3_WRHIGH 0x00200000 // CS2n WRITE Strobe Polarity
#define EPI_HB8CFG3_RDHIGH 0x00100000 // CS2n READ Strobe Polarity
#define EPI_HB8CFG3_ALEHIGH 0x00080000 // CS2n ALE Strobe Polarity
#define EPI_HB8CFG3_WRWS_M 0x000000C0 // CS2n Write Wait States
#define EPI_HB8CFG3_WRWS_2 0x00000000 // Active WRn is 2 EPI clocks
#define EPI_HB8CFG3_WRWS_4 0x00000040 // Active WRn is 4 EPI clocks
#define EPI_HB8CFG3_WRWS_6 0x00000080 // Active WRn is 6 EPI clocks
#define EPI_HB8CFG3_WRWS_8 0x000000C0 // Active WRn is 8 EPI clocks
#define EPI_HB8CFG3_RDWS_M 0x00000030 // CS2n Read Wait States
#define EPI_HB8CFG3_RDWS_2 0x00000000 // Active RDn is 2 EPI clocks
#define EPI_HB8CFG3_RDWS_4 0x00000010 // Active RDn is 4 EPI clocks
#define EPI_HB8CFG3_RDWS_6 0x00000020 // Active RDn is 6 EPI clocks
#define EPI_HB8CFG3_RDWS_8 0x00000030 // Active RDn is 8 EPI clocks
#define EPI_HB8CFG3_MODE_M 0x00000003 // CS2n Host Bus Sub-Mode
#define EPI_HB8CFG3_MODE_ADMUX 0x00000000 // ADMUX - AD[7:0]
#define EPI_HB8CFG3_MODE_AD 0x00000001 // ADNONMUX - D[7:0]
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_HB16CFG3 register.
//
//*****************************************************************************
#define EPI_HB16CFG3_WRHIGH 0x00200000 // CS2n WRITE Strobe Polarity
#define EPI_HB16CFG3_RDHIGH 0x00100000 // CS2n READ Strobe Polarity
#define EPI_HB16CFG3_ALEHIGH 0x00080000 // CS2n ALE Strobe Polarity
#define EPI_HB16CFG3_WRCRE 0x00040000 // CS2n PSRAM Configuration
// Register Write
#define EPI_HB16CFG3_RDCRE 0x00020000 // CS2n PSRAM Configuration
// Register Read
#define EPI_HB16CFG3_BURST 0x00010000 // CS2n Burst Mode
#define EPI_HB16CFG3_WRWS_M 0x000000C0 // CS2n Write Wait States
#define EPI_HB16CFG3_WRWS_2 0x00000000 // Active WRn is 2 EPI clocks
#define EPI_HB16CFG3_WRWS_4 0x00000040 // Active WRn is 4 EPI clocks
#define EPI_HB16CFG3_WRWS_6 0x00000080 // Active WRn is 6 EPI clocks
#define EPI_HB16CFG3_WRWS_8 0x000000C0 // Active WRn is 8 EPI clocks
#define EPI_HB16CFG3_RDWS_M 0x00000030 // CS2n Read Wait States
#define EPI_HB16CFG3_RDWS_2 0x00000000 // Active RDn is 2 EPI clocks
#define EPI_HB16CFG3_RDWS_4 0x00000010 // Active RDn is 4 EPI clocks
#define EPI_HB16CFG3_RDWS_6 0x00000020 // Active RDn is 6 EPI clocks
#define EPI_HB16CFG3_RDWS_8 0x00000030 // Active RDn is 8 EPI clocks
#define EPI_HB16CFG3_MODE_M 0x00000003 // CS2n Host Bus Sub-Mode
#define EPI_HB16CFG3_MODE_ADMUX 0x00000000 // ADMUX - AD[15:0]
#define EPI_HB16CFG3_MODE_AD 0x00000001 // ADNONMUX - D[15:0]
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_HB16CFG4 register.
//
//*****************************************************************************
#define EPI_HB16CFG4_WRHIGH 0x00200000 // CS3n WRITE Strobe Polarity
#define EPI_HB16CFG4_RDHIGH 0x00100000 // CS3n READ Strobe Polarity
#define EPI_HB16CFG4_ALEHIGH 0x00080000 // CS3n ALE Strobe Polarity
#define EPI_HB16CFG4_WRCRE 0x00040000 // CS3n PSRAM Configuration
// Register Write
#define EPI_HB16CFG4_RDCRE 0x00020000 // CS3n PSRAM Configuration
// Register Read
#define EPI_HB16CFG4_BURST 0x00010000 // CS3n Burst Mode
#define EPI_HB16CFG4_WRWS_M 0x000000C0 // CS3n Write Wait States
#define EPI_HB16CFG4_WRWS_2 0x00000000 // Active WRn is 2 EPI clocks
#define EPI_HB16CFG4_WRWS_4 0x00000040 // Active WRn is 4 EPI clocks
#define EPI_HB16CFG4_WRWS_6 0x00000080 // Active WRn is 6 EPI clocks
#define EPI_HB16CFG4_WRWS_8 0x000000C0 // Active WRn is 8 EPI clocks
#define EPI_HB16CFG4_RDWS_M 0x00000030 // CS3n Read Wait States
#define EPI_HB16CFG4_RDWS_2 0x00000000 // Active RDn is 2 EPI clocks
#define EPI_HB16CFG4_RDWS_4 0x00000010 // Active RDn is 4 EPI clocks
#define EPI_HB16CFG4_RDWS_6 0x00000020 // Active RDn is 6 EPI clocks
#define EPI_HB16CFG4_RDWS_8 0x00000030 // Active RDn is 8 EPI clocks
#define EPI_HB16CFG4_MODE_M 0x00000003 // CS3n Host Bus Sub-Mode
#define EPI_HB16CFG4_MODE_ADMUX 0x00000000 // ADMUX - AD[15:0]
#define EPI_HB16CFG4_MODE_AD 0x00000001 // ADNONMUX - D[15:0]
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_HB8CFG4 register.
//
//*****************************************************************************
#define EPI_HB8CFG4_WRHIGH 0x00200000 // CS3n WRITE Strobe Polarity
#define EPI_HB8CFG4_RDHIGH 0x00100000 // CS2n READ Strobe Polarity
#define EPI_HB8CFG4_ALEHIGH 0x00080000 // CS3n ALE Strobe Polarity
#define EPI_HB8CFG4_WRWS_M 0x000000C0 // CS3n Write Wait States
#define EPI_HB8CFG4_WRWS_2 0x00000000 // Active WRn is 2 EPI clocks
#define EPI_HB8CFG4_WRWS_4 0x00000040 // Active WRn is 4 EPI clocks
#define EPI_HB8CFG4_WRWS_6 0x00000080 // Active WRn is 6 EPI clocks
#define EPI_HB8CFG4_WRWS_8 0x000000C0 // Active WRn is 8 EPI clocks
#define EPI_HB8CFG4_RDWS_M 0x00000030 // CS3n Read Wait States
#define EPI_HB8CFG4_RDWS_2 0x00000000 // Active RDn is 2 EPI clocks
#define EPI_HB8CFG4_RDWS_4 0x00000010 // Active RDn is 4 EPI clocks
#define EPI_HB8CFG4_RDWS_6 0x00000020 // Active RDn is 6 EPI clocks
#define EPI_HB8CFG4_RDWS_8 0x00000030 // Active RDn is 8 EPI clocks
#define EPI_HB8CFG4_MODE_M 0x00000003 // CS3n Host Bus Sub-Mode
#define EPI_HB8CFG4_MODE_ADMUX 0x00000000 // ADMUX - AD[7:0]
#define EPI_HB8CFG4_MODE_AD 0x00000001 // ADNONMUX - D[7:0]
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_HB8TIME register.
//
//*****************************************************************************
#define EPI_HB8TIME_IRDYDLY_M 0x03000000 // CS0n Input Ready Delay
#define EPI_HB8TIME_CAPWIDTH_M 0x00003000 // CS0n Inter-transfer Capture
// Width
#define EPI_HB8TIME_WRWSM 0x00000010 // Write Wait State Minus One
#define EPI_HB8TIME_RDWSM 0x00000001 // Read Wait State Minus One
#define EPI_HB8TIME_IRDYDLY_S 24
#define EPI_HB8TIME_CAPWIDTH_S 12
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_HB16TIME register.
//
//*****************************************************************************
#define EPI_HB16TIME_IRDYDLY_M 0x03000000 // CS0n Input Ready Delay
#define EPI_HB16TIME_PSRAMSZ_M 0x00070000 // PSRAM Row Size
#define EPI_HB16TIME_PSRAMSZ_0 0x00000000 // No row size limitation
#define EPI_HB16TIME_PSRAMSZ_128B \
0x00010000 // 128 B
#define EPI_HB16TIME_PSRAMSZ_256B \
0x00020000 // 256 B
#define EPI_HB16TIME_PSRAMSZ_512B \
0x00030000 // 512 B
#define EPI_HB16TIME_PSRAMSZ_1KB \
0x00040000 // 1024 B
#define EPI_HB16TIME_PSRAMSZ_2KB \
0x00050000 // 2048 B
#define EPI_HB16TIME_PSRAMSZ_4KB \
0x00060000 // 4096 B
#define EPI_HB16TIME_PSRAMSZ_8KB \
0x00070000 // 8192 B
#define EPI_HB16TIME_CAPWIDTH_M 0x00003000 // CS0n Inter-transfer Capture
// Width
#define EPI_HB16TIME_WRWSM 0x00000010 // Write Wait State Minus One
#define EPI_HB16TIME_RDWSM 0x00000001 // Read Wait State Minus One
#define EPI_HB16TIME_IRDYDLY_S 24
#define EPI_HB16TIME_CAPWIDTH_S 12
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_HB8TIME2 register.
//
//*****************************************************************************
#define EPI_HB8TIME2_IRDYDLY_M 0x03000000 // CS1n Input Ready Delay
#define EPI_HB8TIME2_CAPWIDTH_M 0x00003000 // CS1n Inter-transfer Capture
// Width
#define EPI_HB8TIME2_WRWSM 0x00000010 // CS1n Write Wait State Minus One
#define EPI_HB8TIME2_RDWSM 0x00000001 // CS1n Read Wait State Minus One
#define EPI_HB8TIME2_IRDYDLY_S 24
#define EPI_HB8TIME2_CAPWIDTH_S 12
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_HB16TIME2
// register.
//
//*****************************************************************************
#define EPI_HB16TIME2_IRDYDLY_M 0x03000000 // CS1n Input Ready Delay
#define EPI_HB16TIME2_PSRAMSZ_M 0x00070000 // PSRAM Row Size
#define EPI_HB16TIME2_PSRAMSZ_0 0x00000000 // No row size limitation
#define EPI_HB16TIME2_PSRAMSZ_128B \
0x00010000 // 128 B
#define EPI_HB16TIME2_PSRAMSZ_256B \
0x00020000 // 256 B
#define EPI_HB16TIME2_PSRAMSZ_512B \
0x00030000 // 512 B
#define EPI_HB16TIME2_PSRAMSZ_1KB \
0x00040000 // 1024 B
#define EPI_HB16TIME2_PSRAMSZ_2KB \
0x00050000 // 2048 B
#define EPI_HB16TIME2_PSRAMSZ_4KB \
0x00060000 // 4096 B
#define EPI_HB16TIME2_PSRAMSZ_8KB \
0x00070000 // 8192 B
#define EPI_HB16TIME2_CAPWIDTH_M \
0x00003000 // CS1n Inter-transfer Capture
// Width
#define EPI_HB16TIME2_WRWSM 0x00000010 // CS1n Write Wait State Minus One
#define EPI_HB16TIME2_RDWSM 0x00000001 // CS1n Read Wait State Minus One
#define EPI_HB16TIME2_IRDYDLY_S 24
#define EPI_HB16TIME2_CAPWIDTH_S \
12
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_HB16TIME3
// register.
//
//*****************************************************************************
#define EPI_HB16TIME3_IRDYDLY_M 0x03000000 // CS2n Input Ready Delay
#define EPI_HB16TIME3_PSRAMSZ_M 0x00070000 // PSRAM Row Size
#define EPI_HB16TIME3_PSRAMSZ_0 0x00000000 // No row size limitation
#define EPI_HB16TIME3_PSRAMSZ_128B \
0x00010000 // 128 B
#define EPI_HB16TIME3_PSRAMSZ_256B \
0x00020000 // 256 B
#define EPI_HB16TIME3_PSRAMSZ_512B \
0x00030000 // 512 B
#define EPI_HB16TIME3_PSRAMSZ_1KB \
0x00040000 // 1024 B
#define EPI_HB16TIME3_PSRAMSZ_2KB \
0x00050000 // 2048 B
#define EPI_HB16TIME3_PSRAMSZ_4KB \
0x00060000 // 4096 B
#define EPI_HB16TIME3_PSRAMSZ_8KB \
0x00070000 // 8192 B
#define EPI_HB16TIME3_CAPWIDTH_M \
0x00003000 // CS2n Inter-transfer Capture
// Width
#define EPI_HB16TIME3_WRWSM 0x00000010 // CS2n Write Wait State Minus One
#define EPI_HB16TIME3_RDWSM 0x00000001 // CS2n Read Wait State Minus One
#define EPI_HB16TIME3_IRDYDLY_S 24
#define EPI_HB16TIME3_CAPWIDTH_S \
12
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_HB8TIME3 register.
//
//*****************************************************************************
#define EPI_HB8TIME3_IRDYDLY_M 0x03000000 // CS2n Input Ready Delay
#define EPI_HB8TIME3_CAPWIDTH_M 0x00003000 // CS2n Inter-transfer Capture
// Width
#define EPI_HB8TIME3_WRWSM 0x00000010 // CS2n Write Wait State Minus One
#define EPI_HB8TIME3_RDWSM 0x00000001 // CS2n Read Wait State Minus One
#define EPI_HB8TIME3_IRDYDLY_S 24
#define EPI_HB8TIME3_CAPWIDTH_S 12
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_HB8TIME4 register.
//
//*****************************************************************************
#define EPI_HB8TIME4_IRDYDLY_M 0x03000000 // CS3n Input Ready Delay
#define EPI_HB8TIME4_CAPWIDTH_M 0x00003000 // CS3n Inter-transfer Capture
// Width
#define EPI_HB8TIME4_WRWSM 0x00000010 // CS3n Write Wait State Minus One
#define EPI_HB8TIME4_RDWSM 0x00000001 // CS3n Read Wait State Minus One
#define EPI_HB8TIME4_IRDYDLY_S 24
#define EPI_HB8TIME4_CAPWIDTH_S 12
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_HB16TIME4
// register.
//
//*****************************************************************************
#define EPI_HB16TIME4_IRDYDLY_M 0x03000000 // CS3n Input Ready Delay
#define EPI_HB16TIME4_PSRAMSZ_M 0x00070000 // PSRAM Row Size
#define EPI_HB16TIME4_PSRAMSZ_0 0x00000000 // No row size limitation
#define EPI_HB16TIME4_PSRAMSZ_128B \
0x00010000 // 128 B
#define EPI_HB16TIME4_PSRAMSZ_256B \
0x00020000 // 256 B
#define EPI_HB16TIME4_PSRAMSZ_512B \
0x00030000 // 512 B
#define EPI_HB16TIME4_PSRAMSZ_1KB \
0x00040000 // 1024 B
#define EPI_HB16TIME4_PSRAMSZ_2KB \
0x00050000 // 2048 B
#define EPI_HB16TIME4_PSRAMSZ_4KB \
0x00060000 // 4096 B
#define EPI_HB16TIME4_PSRAMSZ_8KB \
0x00070000 // 8192 B
#define EPI_HB16TIME4_CAPWIDTH_M \
0x00003000 // CS3n Inter-transfer Capture
// Width
#define EPI_HB16TIME4_WRWSM 0x00000010 // CS3n Write Wait State Minus One
#define EPI_HB16TIME4_RDWSM 0x00000001 // CS3n Read Wait State Minus One
#define EPI_HB16TIME4_IRDYDLY_S 24
#define EPI_HB16TIME4_CAPWIDTH_S \
12
//*****************************************************************************
//
// The following are defines for the bit fields in the EPI_O_HBPSRAM register.
//
//*****************************************************************************
#define EPI_HBPSRAM_CR_M 0x001FFFFF // PSRAM Config Register
#define EPI_HBPSRAM_CR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSEXC_RIS register.
//
//*****************************************************************************
#define SYSEXC_RIS_FPIXCRIS 0x00000020 // Floating-Point Inexact Exception
// Raw Interrupt Status
#define SYSEXC_RIS_FPOFCRIS 0x00000010 // Floating-Point Overflow
// Exception Raw Interrupt Status
#define SYSEXC_RIS_FPUFCRIS 0x00000008 // Floating-Point Underflow
// Exception Raw Interrupt Status
#define SYSEXC_RIS_FPIOCRIS 0x00000004 // Floating-Point Invalid Operation
// Raw Interrupt Status
#define SYSEXC_RIS_FPDZCRIS 0x00000002 // Floating-Point Divide By 0
// Exception Raw Interrupt Status
#define SYSEXC_RIS_FPIDCRIS 0x00000001 // Floating-Point Input Denormal
// Exception Raw Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSEXC_IM register.
//
//*****************************************************************************
#define SYSEXC_IM_FPIXCIM 0x00000020 // Floating-Point Inexact Exception
// Interrupt Mask
#define SYSEXC_IM_FPOFCIM 0x00000010 // Floating-Point Overflow
// Exception Interrupt Mask
#define SYSEXC_IM_FPUFCIM 0x00000008 // Floating-Point Underflow
// Exception Interrupt Mask
#define SYSEXC_IM_FPIOCIM 0x00000004 // Floating-Point Invalid Operation
// Interrupt Mask
#define SYSEXC_IM_FPDZCIM 0x00000002 // Floating-Point Divide By 0
// Exception Interrupt Mask
#define SYSEXC_IM_FPIDCIM 0x00000001 // Floating-Point Input Denormal
// Exception Interrupt Mask
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSEXC_MIS register.
//
//*****************************************************************************
#define SYSEXC_MIS_FPIXCMIS 0x00000020 // Floating-Point Inexact Exception
// Masked Interrupt Status
#define SYSEXC_MIS_FPOFCMIS 0x00000010 // Floating-Point Overflow
// Exception Masked Interrupt
// Status
#define SYSEXC_MIS_FPUFCMIS 0x00000008 // Floating-Point Underflow
// Exception Masked Interrupt
// Status
#define SYSEXC_MIS_FPIOCMIS 0x00000004 // Floating-Point Invalid Operation
// Masked Interrupt Status
#define SYSEXC_MIS_FPDZCMIS 0x00000002 // Floating-Point Divide By 0
// Exception Masked Interrupt
// Status
#define SYSEXC_MIS_FPIDCMIS 0x00000001 // Floating-Point Input Denormal
// Exception Masked Interrupt
// Status
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSEXC_IC register.
//
//*****************************************************************************
#define SYSEXC_IC_FPIXCIC 0x00000020 // Floating-Point Inexact Exception
// Interrupt Clear
#define SYSEXC_IC_FPOFCIC 0x00000010 // Floating-Point Overflow
// Exception Interrupt Clear
#define SYSEXC_IC_FPUFCIC 0x00000008 // Floating-Point Underflow
// Exception Interrupt Clear
#define SYSEXC_IC_FPIOCIC 0x00000004 // Floating-Point Invalid Operation
// Interrupt Clear
#define SYSEXC_IC_FPDZCIC 0x00000002 // Floating-Point Divide By 0
// Exception Interrupt Clear
#define SYSEXC_IC_FPIDCIC 0x00000001 // Floating-Point Input Denormal
// Exception Interrupt Clear
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_RTCC register.
//
//*****************************************************************************
#define HIB_RTCC_M 0xFFFFFFFF // RTC Counter
#define HIB_RTCC_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_RTCM0 register.
//
//*****************************************************************************
#define HIB_RTCM0_M 0xFFFFFFFF // RTC Match 0
#define HIB_RTCM0_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_RTCLD register.
//
//*****************************************************************************
#define HIB_RTCLD_M 0xFFFFFFFF // RTC Load
#define HIB_RTCLD_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_CTL register.
//
//*****************************************************************************
#define HIB_CTL_WRC 0x80000000 // Write Complete/Capable
#define HIB_CTL_RETCLR 0x40000000 // GPIO Retention/Clear
#define HIB_CTL_OSCSEL 0x00080000 // Oscillator Select
#define HIB_CTL_OSCDRV 0x00020000 // Oscillator Drive Capability
#define HIB_CTL_OSCBYP 0x00010000 // Oscillator Bypass
#define HIB_CTL_VBATSEL_M 0x00006000 // Select for Low-Battery
// Comparator
#define HIB_CTL_VBATSEL_1_9V 0x00000000 // 1.9 Volts
#define HIB_CTL_VBATSEL_2_1V 0x00002000 // 2.1 Volts (default)
#define HIB_CTL_VBATSEL_2_3V 0x00004000 // 2.3 Volts
#define HIB_CTL_VBATSEL_2_5V 0x00006000 // 2.5 Volts
#define HIB_CTL_BATCHK 0x00000400 // Check Battery Status
#define HIB_CTL_BATWKEN 0x00000200 // Wake on Low Battery
#define HIB_CTL_VDD3ON 0x00000100 // VDD Powered
#define HIB_CTL_VABORT 0x00000080 // Power Cut Abort Enable
#define HIB_CTL_CLK32EN 0x00000040 // Clocking Enable
#define HIB_CTL_PINWEN 0x00000010 // External Wake Pin Enable
#define HIB_CTL_RTCWEN 0x00000008 // RTC Wake-up Enable
#define HIB_CTL_HIBREQ 0x00000002 // Hibernation Request
#define HIB_CTL_RTCEN 0x00000001 // RTC Timer Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_IM register.
//
//*****************************************************************************
#define HIB_IM_VDDFAIL 0x00000080 // VDD Fail Interrupt Mask
#define HIB_IM_RSTWK 0x00000040 // Reset Pad I/O Wake-Up Interrupt
// Mask
#define HIB_IM_PADIOWK 0x00000020 // Pad I/O Wake-Up Interrupt Mask
#define HIB_IM_WC 0x00000010 // External Write Complete/Capable
// Interrupt Mask
#define HIB_IM_EXTW 0x00000008 // External Wake-Up Interrupt Mask
#define HIB_IM_LOWBAT 0x00000004 // Low Battery Voltage Interrupt
// Mask
#define HIB_IM_RTCALT0 0x00000001 // RTC Alert 0 Interrupt Mask
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_RIS register.
//
//*****************************************************************************
#define HIB_RIS_VDDFAIL 0x00000080 // VDD Fail Raw Interrupt Status
#define HIB_RIS_RSTWK 0x00000040 // Reset Pad I/O Wake-Up Raw
// Interrupt Status
#define HIB_RIS_PADIOWK 0x00000020 // Pad I/O Wake-Up Raw Interrupt
// Status
#define HIB_RIS_WC 0x00000010 // Write Complete/Capable Raw
// Interrupt Status
#define HIB_RIS_EXTW 0x00000008 // External Wake-Up Raw Interrupt
// Status
#define HIB_RIS_LOWBAT 0x00000004 // Low Battery Voltage Raw
// Interrupt Status
#define HIB_RIS_RTCALT0 0x00000001 // RTC Alert 0 Raw Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_MIS register.
//
//*****************************************************************************
#define HIB_MIS_VDDFAIL 0x00000080 // VDD Fail Interrupt Mask
#define HIB_MIS_RSTWK 0x00000040 // Reset Pad I/O Wake-Up Interrupt
// Mask
#define HIB_MIS_PADIOWK 0x00000020 // Pad I/O Wake-Up Interrupt Mask
#define HIB_MIS_WC 0x00000010 // Write Complete/Capable Masked
// Interrupt Status
#define HIB_MIS_EXTW 0x00000008 // External Wake-Up Masked
// Interrupt Status
#define HIB_MIS_LOWBAT 0x00000004 // Low Battery Voltage Masked
// Interrupt Status
#define HIB_MIS_RTCALT0 0x00000001 // RTC Alert 0 Masked Interrupt
// Status
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_IC register.
//
//*****************************************************************************
#define HIB_IC_VDDFAIL 0x00000080 // VDD Fail Interrupt Clear
#define HIB_IC_RSTWK 0x00000040 // Reset Pad I/O Wake-Up Interrupt
// Clear
#define HIB_IC_PADIOWK 0x00000020 // Pad I/O Wake-Up Interrupt Clear
#define HIB_IC_WC 0x00000010 // Write Complete/Capable Interrupt
// Clear
#define HIB_IC_EXTW 0x00000008 // External Wake-Up Interrupt Clear
#define HIB_IC_LOWBAT 0x00000004 // Low Battery Voltage Interrupt
// Clear
#define HIB_IC_RTCALT0 0x00000001 // RTC Alert0 Masked Interrupt
// Clear
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_RTCT register.
//
//*****************************************************************************
#define HIB_RTCT_TRIM_M 0x0000FFFF // RTC Trim Value
#define HIB_RTCT_TRIM_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_RTCSS register.
//
//*****************************************************************************
#define HIB_RTCSS_RTCSSM_M 0x7FFF0000 // RTC Sub Seconds Match
#define HIB_RTCSS_RTCSSC_M 0x00007FFF // RTC Sub Seconds Count
#define HIB_RTCSS_RTCSSM_S 16
#define HIB_RTCSS_RTCSSC_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_IO register.
//
//*****************************************************************************
#define HIB_IO_IOWRC 0x80000000 // I/O Write Complete
#define HIB_IO_WURSTEN 0x00000010 // Reset Wake Source Enable
#define HIB_IO_WUUNLK 0x00000001 // I/O Wake Pad Configuration
// Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_DATA register.
//
//*****************************************************************************
#define HIB_DATA_RTD_M 0xFFFFFFFF // Hibernation Module NV Data
#define HIB_DATA_RTD_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_CALCTL register.
//
//*****************************************************************************
#define HIB_CALCTL_CAL24 0x00000004 // Calendar Mode
#define HIB_CALCTL_CALEN 0x00000001 // RTC Calendar/Counter Mode Select
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_CAL0 register.
//
//*****************************************************************************
#define HIB_CAL0_VALID 0x80000000 // Valid Calendar Load
#define HIB_CAL0_AMPM 0x00400000 // AM/PM Designation
#define HIB_CAL0_HR_M 0x001F0000 // Hours
#define HIB_CAL0_MIN_M 0x00003F00 // Minutes
#define HIB_CAL0_SEC_M 0x0000003F // Seconds
#define HIB_CAL0_HR_S 16
#define HIB_CAL0_MIN_S 8
#define HIB_CAL0_SEC_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_CAL1 register.
//
//*****************************************************************************
#define HIB_CAL1_VALID 0x80000000 // Valid Calendar Load
#define HIB_CAL1_DOW_M 0x07000000 // Day of Week
#define HIB_CAL1_YEAR_M 0x007F0000 // Year Value
#define HIB_CAL1_MON_M 0x00000F00 // Month
#define HIB_CAL1_DOM_M 0x0000001F // Day of Month
#define HIB_CAL1_DOW_S 24
#define HIB_CAL1_YEAR_S 16
#define HIB_CAL1_MON_S 8
#define HIB_CAL1_DOM_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_CALLD0 register.
//
//*****************************************************************************
#define HIB_CALLD0_AMPM 0x00400000 // AM/PM Designation
#define HIB_CALLD0_HR_M 0x001F0000 // Hours
#define HIB_CALLD0_MIN_M 0x00003F00 // Minutes
#define HIB_CALLD0_SEC_M 0x0000003F // Seconds
#define HIB_CALLD0_HR_S 16
#define HIB_CALLD0_MIN_S 8
#define HIB_CALLD0_SEC_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_CALLD1 register.
//
//*****************************************************************************
#define HIB_CALLD1_DOW_M 0x07000000 // Day of Week
#define HIB_CALLD1_YEAR_M 0x007F0000 // Year Value
#define HIB_CALLD1_MON_M 0x00000F00 // Month
#define HIB_CALLD1_DOM_M 0x0000001F // Day of Month
#define HIB_CALLD1_DOW_S 24
#define HIB_CALLD1_YEAR_S 16
#define HIB_CALLD1_MON_S 8
#define HIB_CALLD1_DOM_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_CALM0 register.
//
//*****************************************************************************
#define HIB_CALM0_AMPM 0x00400000 // AM/PM Designation
#define HIB_CALM0_HR_M 0x001F0000 // Hours
#define HIB_CALM0_MIN_M 0x00003F00 // Minutes
#define HIB_CALM0_SEC_M 0x0000003F // Seconds
#define HIB_CALM0_HR_S 16
#define HIB_CALM0_MIN_S 8
#define HIB_CALM0_SEC_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_CALM1 register.
//
//*****************************************************************************
#define HIB_CALM1_DOM_M 0x0000001F // Day of Month
#define HIB_CALM1_DOM_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_LOCK register.
//
//*****************************************************************************
#define HIB_LOCK_HIBLOCK_M 0xFFFFFFFF // HIbernate Lock
#define HIB_LOCK_HIBLOCK_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_TPCTL register.
//
//*****************************************************************************
#define HIB_TPCTL_WAKE 0x00000800 // Wake from Hibernate on a Tamper
// Event
#define HIB_TPCTL_MEMCLR_M 0x00000300 // HIB Memory Clear on Tamper Event
#define HIB_TPCTL_MEMCLR_NONE 0x00000000 // Do not Clear HIB memory on
// tamper event
#define HIB_TPCTL_MEMCLR_LOW32 0x00000100 // Clear Lower 32 Bytes of HIB
// memory on tamper event
#define HIB_TPCTL_MEMCLR_HIGH32 0x00000200 // Clear upper 32 Bytes of HIB
// memory on tamper event
#define HIB_TPCTL_MEMCLR_ALL 0x00000300 // Clear all HIB memory on tamper
// event
#define HIB_TPCTL_TPCLR 0x00000010 // Tamper Event Clear
#define HIB_TPCTL_TPEN 0x00000001 // Tamper Module Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_TPSTAT register.
//
//*****************************************************************************
#define HIB_TPSTAT_STATE_M 0x0000000C // Tamper Module Status
#define HIB_TPSTAT_STATE_DISABLED \
0x00000000 // Tamper disabled
#define HIB_TPSTAT_STATE_CONFIGED \
0x00000004 // Tamper configured
#define HIB_TPSTAT_STATE_ERROR 0x00000008 // Tamper pin event occurred
#define HIB_TPSTAT_XOSCST 0x00000002 // External Oscillator Status
#define HIB_TPSTAT_XOSCFAIL 0x00000001 // External Oscillator Failure
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_TPIO register.
//
//*****************************************************************************
#define HIB_TPIO_GFLTR3 0x08000000 // TMPR3 Glitch Filtering
#define HIB_TPIO_PUEN3 0x04000000 // TMPR3 Internal Weak Pull-up
// Enable
#define HIB_TPIO_LEV3 0x02000000 // TMPR3 Trigger Level
#define HIB_TPIO_EN3 0x01000000 // TMPR3 Enable
#define HIB_TPIO_GFLTR2 0x00080000 // TMPR2 Glitch Filtering
#define HIB_TPIO_PUEN2 0x00040000 // TMPR2 Internal Weak Pull-up
// Enable
#define HIB_TPIO_LEV2 0x00020000 // TMPR2 Trigger Level
#define HIB_TPIO_EN2 0x00010000 // TMPR2 Enable
#define HIB_TPIO_GFLTR1 0x00000800 // TMPR1 Glitch Filtering
#define HIB_TPIO_PUEN1 0x00000400 // TMPR1 Internal Weak Pull-up
// Enable
#define HIB_TPIO_LEV1 0x00000200 // TMPR1 Trigger Level
#define HIB_TPIO_EN1 0x00000100 // TMPR1Enable
#define HIB_TPIO_GFLTR0 0x00000008 // TMPR0 Glitch Filtering
#define HIB_TPIO_PUEN0 0x00000004 // TMPR0 Internal Weak Pull-up
// Enable
#define HIB_TPIO_LEV0 0x00000002 // TMPR0 Trigger Level
#define HIB_TPIO_EN0 0x00000001 // TMPR0 Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_TPLOG0 register.
//
//*****************************************************************************
#define HIB_TPLOG0_TIME_M 0xFFFFFFFF // Tamper Log Calendar Information
#define HIB_TPLOG0_TIME_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_TPLOG1 register.
//
//*****************************************************************************
#define HIB_TPLOG1_XOSC 0x00010000 // Status of external 32
#define HIB_TPLOG1_TRIG3 0x00000008 // Status of TMPR[3] Trigger
#define HIB_TPLOG1_TRIG2 0x00000004 // Status of TMPR[2] Trigger
#define HIB_TPLOG1_TRIG1 0x00000002 // Status of TMPR[1] Trigger
#define HIB_TPLOG1_TRIG0 0x00000001 // Status of TMPR[0] Trigger
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_TPLOG2 register.
//
//*****************************************************************************
#define HIB_TPLOG2_TIME_M 0xFFFFFFFF // Tamper Log Calendar Information
#define HIB_TPLOG2_TIME_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_TPLOG3 register.
//
//*****************************************************************************
#define HIB_TPLOG3_XOSC 0x00010000 // Status of external 32
#define HIB_TPLOG3_TRIG3 0x00000008 // Status of TMPR[3] Trigger
#define HIB_TPLOG3_TRIG2 0x00000004 // Status of TMPR[2] Trigger
#define HIB_TPLOG3_TRIG1 0x00000002 // Status of TMPR[1] Trigger
#define HIB_TPLOG3_TRIG0 0x00000001 // Status of TMPR[0] Trigger
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_TPLOG4 register.
//
//*****************************************************************************
#define HIB_TPLOG4_TIME_M 0xFFFFFFFF // Tamper Log Calendar Information
#define HIB_TPLOG4_TIME_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_TPLOG5 register.
//
//*****************************************************************************
#define HIB_TPLOG5_XOSC 0x00010000 // Status of external 32
#define HIB_TPLOG5_TRIG3 0x00000008 // Status of TMPR[3] Trigger
#define HIB_TPLOG5_TRIG2 0x00000004 // Status of TMPR[2] Trigger
#define HIB_TPLOG5_TRIG1 0x00000002 // Status of TMPR[1] Trigger
#define HIB_TPLOG5_TRIG0 0x00000001 // Status of TMPR[0] Trigger
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_TPLOG6 register.
//
//*****************************************************************************
#define HIB_TPLOG6_TIME_M 0xFFFFFFFF // Tamper Log Calendar Information
#define HIB_TPLOG6_TIME_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_TPLOG7 register.
//
//*****************************************************************************
#define HIB_TPLOG7_XOSC 0x00010000 // Status of external 32
#define HIB_TPLOG7_TRIG3 0x00000008 // Status of TMPR[3] Trigger
#define HIB_TPLOG7_TRIG2 0x00000004 // Status of TMPR[2] Trigger
#define HIB_TPLOG7_TRIG1 0x00000002 // Status of TMPR[1] Trigger
#define HIB_TPLOG7_TRIG0 0x00000001 // Status of TMPR[0] Trigger
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_PP register.
//
//*****************************************************************************
#define HIB_PP_TAMPER 0x00000002 // Tamper Pin Presence
#define HIB_PP_WAKENC 0x00000001 // Wake Pin Presence
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_CC register.
//
//*****************************************************************************
#define HIB_CC_SYSCLKEN 0x00000001 // RTCOSC to System Clock Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMA register.
//
//*****************************************************************************
#define FLASH_FMA_OFFSET_M 0x000FFFFF // Address Offset
#define FLASH_FMA_OFFSET_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMD register.
//
//*****************************************************************************
#define FLASH_FMD_DATA_M 0xFFFFFFFF // Data Value
#define FLASH_FMD_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMC register.
//
//*****************************************************************************
#define FLASH_FMC_WRKEY 0xA4420000 // FLASH write key
#define FLASH_FMC_COMT 0x00000008 // Commit Register Value
#define FLASH_FMC_MERASE 0x00000004 // Mass Erase Flash Memory
#define FLASH_FMC_ERASE 0x00000002 // Erase a Page of Flash Memory
#define FLASH_FMC_WRITE 0x00000001 // Write a Word into Flash Memory
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FCRIS register.
//
//*****************************************************************************
#define FLASH_FCRIS_PROGRIS 0x00002000 // Program Verify Error Raw
// Interrupt Status
#define FLASH_FCRIS_ERRIS 0x00000800 // Erase Verify Error Raw Interrupt
// Status
#define FLASH_FCRIS_INVDRIS 0x00000400 // Invalid Data Raw Interrupt
// Status
#define FLASH_FCRIS_VOLTRIS 0x00000200 // Pump Voltage Raw Interrupt
// Status
#define FLASH_FCRIS_ERIS 0x00000004 // EEPROM Raw Interrupt Status
#define FLASH_FCRIS_PRIS 0x00000002 // Programming Raw Interrupt Status
#define FLASH_FCRIS_ARIS 0x00000001 // Access Raw Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FCIM register.
//
//*****************************************************************************
#define FLASH_FCIM_PROGMASK 0x00002000 // PROGVER Interrupt Mask
#define FLASH_FCIM_ERMASK 0x00000800 // ERVER Interrupt Mask
#define FLASH_FCIM_INVDMASK 0x00000400 // Invalid Data Interrupt Mask
#define FLASH_FCIM_VOLTMASK 0x00000200 // VOLT Interrupt Mask
#define FLASH_FCIM_EMASK 0x00000004 // EEPROM Interrupt Mask
#define FLASH_FCIM_PMASK 0x00000002 // Programming Interrupt Mask
#define FLASH_FCIM_AMASK 0x00000001 // Access Interrupt Mask
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FCMISC register.
//
//*****************************************************************************
#define FLASH_FCMISC_PROGMISC 0x00002000 // PROGVER Masked Interrupt Status
// and Clear
#define FLASH_FCMISC_ERMISC 0x00000800 // ERVER Masked Interrupt Status
// and Clear
#define FLASH_FCMISC_INVDMISC 0x00000400 // Invalid Data Masked Interrupt
// Status and Clear
#define FLASH_FCMISC_VOLTMISC 0x00000200 // VOLT Masked Interrupt Status and
// Clear
#define FLASH_FCMISC_EMISC 0x00000004 // EEPROM Masked Interrupt Status
// and Clear
#define FLASH_FCMISC_PMISC 0x00000002 // Programming Masked Interrupt
// Status and Clear
#define FLASH_FCMISC_AMISC 0x00000001 // Access Masked Interrupt Status
// and Clear
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMC2 register.
//
//*****************************************************************************
#define FLASH_FMC2_WRBUF 0x00000001 // Buffered Flash Memory Write
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FWBVAL register.
//
//*****************************************************************************
#define FLASH_FWBVAL_FWB_M 0xFFFFFFFF // Flash Memory Write Buffer
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FLPEKEY register.
//
//*****************************************************************************
#define FLASH_FLPEKEY_PEKEY_M 0x0000FFFF // Key Value
#define FLASH_FLPEKEY_PEKEY_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FWBN register.
//
//*****************************************************************************
#define FLASH_FWBN_DATA_M 0xFFFFFFFF // Data
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_PP register.
//
//*****************************************************************************
#define FLASH_PP_PFC 0x40000000 // Prefetch Buffer Mode
#define FLASH_PP_FMM 0x20000000 // Flash Mirror Mode
#define FLASH_PP_DFA 0x10000000 // DMA Flash Access
#define FLASH_PP_EESS_M 0x00780000 // EEPROM Sector Size of the
// physical bank
#define FLASH_PP_EESS_1KB 0x00000000 // 1 KB
#define FLASH_PP_EESS_2KB 0x00080000 // 2 KB
#define FLASH_PP_EESS_4KB 0x00100000 // 4 KB
#define FLASH_PP_EESS_8KB 0x00180000 // 8 KB
#define FLASH_PP_MAINSS_M 0x00070000 // Flash Sector Size of the
// physical bank
#define FLASH_PP_MAINSS_1KB 0x00000000 // 1 KB
#define FLASH_PP_MAINSS_2KB 0x00010000 // 2 KB
#define FLASH_PP_MAINSS_4KB 0x00020000 // 4 KB
#define FLASH_PP_MAINSS_8KB 0x00030000 // 8 KB
#define FLASH_PP_MAINSS_16KB 0x00040000 // 16 KB
#define FLASH_PP_SIZE_M 0x0000FFFF // Flash Size
#define FLASH_PP_SIZE_1MB 0x000001FF // 1024 KB of Flash
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_SSIZE register.
//
//*****************************************************************************
#define FLASH_SSIZE_SIZE_M 0x0000FFFF // SRAM Size
#define FLASH_SSIZE_SIZE_256KB 0x000003FF // 256 KB of SRAM
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_CONF register.
//
//*****************************************************************************
#define FLASH_CONF_FMME 0x40000000 // Flash Mirror Mode Enable
#define FLASH_CONF_SPFE 0x20000000 // Single Prefetch Mode Enable
#define FLASH_CONF_CLRTV 0x00100000 // Clear Valid Tags
#define FLASH_CONF_FPFON 0x00020000 // Force Prefetch On
#define FLASH_CONF_FPFOFF 0x00010000 // Force Prefetch Off
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_ROMSWMAP register.
//
//*****************************************************************************
#define FLASH_ROMSWMAP_SW7EN_M 0x0000C000 // ROM SW Region 7 Availability
#define FLASH_ROMSWMAP_SW7EN_NOTVIS \
0x00000000 // Software region not available to
// the core
#define FLASH_ROMSWMAP_SW7EN_CORE \
0x00004000 // Region available to core
#define FLASH_ROMSWMAP_SW6EN_M 0x00003000 // ROM SW Region 6 Availability
#define FLASH_ROMSWMAP_SW6EN_NOTVIS \
0x00000000 // Software region not available to
// the core
#define FLASH_ROMSWMAP_SW6EN_CORE \
0x00001000 // Region available to core
#define FLASH_ROMSWMAP_SW5EN_M 0x00000C00 // ROM SW Region 5 Availability
#define FLASH_ROMSWMAP_SW5EN_NOTVIS \
0x00000000 // Software region not available to
// the core
#define FLASH_ROMSWMAP_SW5EN_CORE \
0x00000400 // Region available to core
#define FLASH_ROMSWMAP_SW4EN_M 0x00000300 // ROM SW Region 4 Availability
#define FLASH_ROMSWMAP_SW4EN_NOTVIS \
0x00000000 // Software region not available to
// the core
#define FLASH_ROMSWMAP_SW4EN_CORE \
0x00000100 // Region available to core
#define FLASH_ROMSWMAP_SW3EN_M 0x000000C0 // ROM SW Region 3 Availability
#define FLASH_ROMSWMAP_SW3EN_NOTVIS \
0x00000000 // Software region not available to
// the core
#define FLASH_ROMSWMAP_SW3EN_CORE \
0x00000040 // Region available to core
#define FLASH_ROMSWMAP_SW2EN_M 0x00000030 // ROM SW Region 2 Availability
#define FLASH_ROMSWMAP_SW2EN_NOTVIS \
0x00000000 // Software region not available to
// the core
#define FLASH_ROMSWMAP_SW2EN_CORE \
0x00000010 // Region available to core
#define FLASH_ROMSWMAP_SW1EN_M 0x0000000C // ROM SW Region 1 Availability
#define FLASH_ROMSWMAP_SW1EN_NOTVIS \
0x00000000 // Software region not available to
// the core
#define FLASH_ROMSWMAP_SW1EN_CORE \
0x00000004 // Region available to core
#define FLASH_ROMSWMAP_SW0EN_M 0x00000003 // ROM SW Region 0 Availability
#define FLASH_ROMSWMAP_SW0EN_NOTVIS \
0x00000000 // Software region not available to
// the core
#define FLASH_ROMSWMAP_SW0EN_CORE \
0x00000001 // Region available to core
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_DMASZ register.
//
//*****************************************************************************
#define FLASH_DMASZ_SIZE_M 0x0003FFFF // uDMA-accessible Memory Size
#define FLASH_DMASZ_SIZE_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_DMAST register.
//
//*****************************************************************************
#define FLASH_DMAST_ADDR_M 0x1FFFF800 // Contains the starting address of
// the flash region accessible by
// uDMA if the FLASHPP register DFA
// bit is set
#define FLASH_DMAST_ADDR_S 11
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_RVP register.
//
//*****************************************************************************
#define FLASH_RVP_RV_M 0xFFFFFFFF // Reset Vector Pointer Address
#define FLASH_RVP_RV_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_BOOTCFG register.
//
//*****************************************************************************
#define FLASH_BOOTCFG_NW 0x80000000 // Not Written
#define FLASH_BOOTCFG_PORT_M 0x0000E000 // Boot GPIO Port
#define FLASH_BOOTCFG_PORT_A 0x00000000 // Port A
#define FLASH_BOOTCFG_PORT_B 0x00002000 // Port B
#define FLASH_BOOTCFG_PORT_C 0x00004000 // Port C
#define FLASH_BOOTCFG_PORT_D 0x00006000 // Port D
#define FLASH_BOOTCFG_PORT_E 0x00008000 // Port E
#define FLASH_BOOTCFG_PORT_F 0x0000A000 // Port F
#define FLASH_BOOTCFG_PORT_G 0x0000C000 // Port G
#define FLASH_BOOTCFG_PORT_H 0x0000E000 // Port H
#define FLASH_BOOTCFG_PIN_M 0x00001C00 // Boot GPIO Pin
#define FLASH_BOOTCFG_PIN_0 0x00000000 // Pin 0
#define FLASH_BOOTCFG_PIN_1 0x00000400 // Pin 1
#define FLASH_BOOTCFG_PIN_2 0x00000800 // Pin 2
#define FLASH_BOOTCFG_PIN_3 0x00000C00 // Pin 3
#define FLASH_BOOTCFG_PIN_4 0x00001000 // Pin 4
#define FLASH_BOOTCFG_PIN_5 0x00001400 // Pin 5
#define FLASH_BOOTCFG_PIN_6 0x00001800 // Pin 6
#define FLASH_BOOTCFG_PIN_7 0x00001C00 // Pin 7
#define FLASH_BOOTCFG_POL 0x00000200 // Boot GPIO Polarity
#define FLASH_BOOTCFG_EN 0x00000100 // Boot GPIO Enable
#define FLASH_BOOTCFG_KEY 0x00000010 // KEY Select
#define FLASH_BOOTCFG_DBG1 0x00000002 // Debug Control 1
#define FLASH_BOOTCFG_DBG0 0x00000001 // Debug Control 0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_USERREG0 register.
//
//*****************************************************************************
#define FLASH_USERREG0_DATA_M 0xFFFFFFFF // User Data
#define FLASH_USERREG0_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_USERREG1 register.
//
//*****************************************************************************
#define FLASH_USERREG1_DATA_M 0xFFFFFFFF // User Data
#define FLASH_USERREG1_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_USERREG2 register.
//
//*****************************************************************************
#define FLASH_USERREG2_DATA_M 0xFFFFFFFF // User Data
#define FLASH_USERREG2_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_USERREG3 register.
//
//*****************************************************************************
#define FLASH_USERREG3_DATA_M 0xFFFFFFFF // User Data
#define FLASH_USERREG3_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMPRE8 register.
//
//*****************************************************************************
#define FLASH_FMPRE8_READ_ENABLE_M \
0xFFFFFFFF // Flash Read Enable
#define FLASH_FMPRE8_READ_ENABLE_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMPRE9 register.
//
//*****************************************************************************
#define FLASH_FMPRE9_READ_ENABLE_M \
0xFFFFFFFF // Flash Read Enable
#define FLASH_FMPRE9_READ_ENABLE_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMPRE10 register.
//
//*****************************************************************************
#define FLASH_FMPRE10_READ_ENABLE_M \
0xFFFFFFFF // Flash Read Enable
#define FLASH_FMPRE10_READ_ENABLE_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMPRE11 register.
//
//*****************************************************************************
#define FLASH_FMPRE11_READ_ENABLE_M \
0xFFFFFFFF // Flash Read Enable
#define FLASH_FMPRE11_READ_ENABLE_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMPRE12 register.
//
//*****************************************************************************
#define FLASH_FMPRE12_READ_ENABLE_M \
0xFFFFFFFF // Flash Read Enable
#define FLASH_FMPRE12_READ_ENABLE_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMPRE13 register.
//
//*****************************************************************************
#define FLASH_FMPRE13_READ_ENABLE_M \
0xFFFFFFFF // Flash Read Enable
#define FLASH_FMPRE13_READ_ENABLE_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMPRE14 register.
//
//*****************************************************************************
#define FLASH_FMPRE14_READ_ENABLE_M \
0xFFFFFFFF // Flash Read Enable
#define FLASH_FMPRE14_READ_ENABLE_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMPRE15 register.
//
//*****************************************************************************
#define FLASH_FMPRE15_READ_ENABLE_M \
0xFFFFFFFF // Flash Read Enable
#define FLASH_FMPRE15_READ_ENABLE_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMPPE8 register.
//
//*****************************************************************************
#define FLASH_FMPPE8_PROG_ENABLE_M \
0xFFFFFFFF // Flash Programming Enable
#define FLASH_FMPPE8_PROG_ENABLE_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMPPE9 register.
//
//*****************************************************************************
#define FLASH_FMPPE9_PROG_ENABLE_M \
0xFFFFFFFF // Flash Programming Enable
#define FLASH_FMPPE9_PROG_ENABLE_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMPPE10 register.
//
//*****************************************************************************
#define FLASH_FMPPE10_PROG_ENABLE_M \
0xFFFFFFFF // Flash Programming Enable
#define FLASH_FMPPE10_PROG_ENABLE_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMPPE11 register.
//
//*****************************************************************************
#define FLASH_FMPPE11_PROG_ENABLE_M \
0xFFFFFFFF // Flash Programming Enable
#define FLASH_FMPPE11_PROG_ENABLE_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMPPE12 register.
//
//*****************************************************************************
#define FLASH_FMPPE12_PROG_ENABLE_M \
0xFFFFFFFF // Flash Programming Enable
#define FLASH_FMPPE12_PROG_ENABLE_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMPPE13 register.
//
//*****************************************************************************
#define FLASH_FMPPE13_PROG_ENABLE_M \
0xFFFFFFFF // Flash Programming Enable
#define FLASH_FMPPE13_PROG_ENABLE_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMPPE14 register.
//
//*****************************************************************************
#define FLASH_FMPPE14_PROG_ENABLE_M \
0xFFFFFFFF // Flash Programming Enable
#define FLASH_FMPPE14_PROG_ENABLE_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMPPE15 register.
//
//*****************************************************************************
#define FLASH_FMPPE15_PROG_ENABLE_M \
0xFFFFFFFF // Flash Programming Enable
#define FLASH_FMPPE15_PROG_ENABLE_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DID0 register.
//
//*****************************************************************************
#define SYSCTL_DID0_VER_M 0x70000000 // DID0 Version
#define SYSCTL_DID0_VER_1 0x10000000 // Second version of the DID0
// register format.
#define SYSCTL_DID0_CLASS_M 0x00FF0000 // Device Class
#define SYSCTL_DID0_CLASS_MSP432E4 \
0x000C0000 // MSP432E4 microcontrollers
#define SYSCTL_DID0_MAJ_M 0x0000FF00 // Major Revision
#define SYSCTL_DID0_MAJ_REVA 0x00000000 // Revision A (initial device)
#define SYSCTL_DID0_MAJ_REVB 0x00000100 // Revision B (first base layer
// revision)
#define SYSCTL_DID0_MAJ_REVC 0x00000200 // Revision C (second base layer
// revision)
#define SYSCTL_DID0_MIN_M 0x000000FF // Minor Revision
#define SYSCTL_DID0_MIN_0 0x00000000 // Initial device, or a major
// revision update
#define SYSCTL_DID0_MIN_1 0x00000001 // First metal layer change
#define SYSCTL_DID0_MIN_2 0x00000002 // Second metal layer change
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DID1 register.
//
//*****************************************************************************
#define SYSCTL_DID1_VER_M 0xF0000000 // DID1 Version
#define SYSCTL_DID1_VER_1 0x10000000 // Second version of DID1
#define SYSCTL_DID1_FAM_M 0x0F000000 // Family
#define SYSCTL_DID1_FAM_MSP432E4 \
0x00000000 // MSP432E4 family of microcontollers
#define SYSCTL_DID1_PRTNO_M 0x00FF0000 // Part Number
#define SYSCTL_DID1_PRTNO_MSP432E411Y \
0x00320000 // MSP432E411Y
#define SYSCTL_DID1_PINCNT_M 0x0000E000 // Package Pin Count
#define SYSCTL_DID1_PINCNT_128 0x0000C000 // 128-pin TQFP package
#define SYSCTL_DID1_PINCNT_212 0x0000E000 // 212-pin BGA package
#define SYSCTL_DID1_TEMP_M 0x000000E0 // Temperature Range
#define SYSCTL_DID1_TEMP_C 0x00000000 // Commercial temperature range
#define SYSCTL_DID1_TEMP_I 0x00000020 // Industrial temperature range
#define SYSCTL_DID1_TEMP_E 0x00000040 // Extended temperature range
#define SYSCTL_DID1_PKG_M 0x00000018 // Package Type
#define SYSCTL_DID1_PKG_QFP 0x00000008 // QFP package
#define SYSCTL_DID1_PKG_BGA 0x00000010 // BGA package
#define SYSCTL_DID1_ROHS 0x00000004 // RoHS-Compliance
#define SYSCTL_DID1_QUAL_M 0x00000003 // Qualification Status
#define SYSCTL_DID1_QUAL_ES 0x00000000 // Engineering Sample (unqualified)
#define SYSCTL_DID1_QUAL_PP 0x00000001 // Pilot Production (unqualified)
#define SYSCTL_DID1_QUAL_FQ 0x00000002 // Fully Qualified
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PTBOCTL register.
//
//*****************************************************************************
#define SYSCTL_PTBOCTL_VDDA_UBOR_M \
0x00000300 // VDDA under BOR Event Action
#define SYSCTL_PTBOCTL_VDDA_UBOR_NONE \
0x00000000 // No Action
#define SYSCTL_PTBOCTL_VDDA_UBOR_SYSINT \
0x00000100 // System control interrupt
#define SYSCTL_PTBOCTL_VDDA_UBOR_NMI \
0x00000200 // NMI
#define SYSCTL_PTBOCTL_VDDA_UBOR_RST \
0x00000300 // Reset
#define SYSCTL_PTBOCTL_VDD_UBOR_M \
0x00000003 // VDD (VDDS) under BOR Event
// Action
#define SYSCTL_PTBOCTL_VDD_UBOR_NONE \
0x00000000 // No Action
#define SYSCTL_PTBOCTL_VDD_UBOR_SYSINT \
0x00000001 // System control interrupt
#define SYSCTL_PTBOCTL_VDD_UBOR_NMI \
0x00000002 // NMI
#define SYSCTL_PTBOCTL_VDD_UBOR_RST \
0x00000003 // Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RIS register.
//
//*****************************************************************************
#define SYSCTL_RIS_MOSCPUPRIS 0x00000100 // MOSC Power Up Raw Interrupt
// Status
#define SYSCTL_RIS_PLLLRIS 0x00000040 // PLL Lock Raw Interrupt Status
#define SYSCTL_RIS_MOFRIS 0x00000008 // Main Oscillator Failure Raw
// Interrupt Status
#define SYSCTL_RIS_BORRIS 0x00000002 // Brown-Out Reset Raw Interrupt
// Status
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_IMC register.
//
//*****************************************************************************
#define SYSCTL_IMC_MOSCPUPIM 0x00000100 // MOSC Power Up Interrupt Mask
#define SYSCTL_IMC_PLLLIM 0x00000040 // PLL Lock Interrupt Mask
#define SYSCTL_IMC_MOFIM 0x00000008 // Main Oscillator Failure
// Interrupt Mask
#define SYSCTL_IMC_BORIM 0x00000002 // Brown-Out Reset Interrupt Mask
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_MISC register.
//
//*****************************************************************************
#define SYSCTL_MISC_MOSCPUPMIS 0x00000100 // MOSC Power Up Masked Interrupt
// Status
#define SYSCTL_MISC_PLLLMIS 0x00000040 // PLL Lock Masked Interrupt Status
#define SYSCTL_MISC_MOFMIS 0x00000008 // Main Oscillator Failure Masked
// Interrupt Status
#define SYSCTL_MISC_BORMIS 0x00000002 // BOR Masked Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RESC register.
//
//*****************************************************************************
#define SYSCTL_RESC_MOSCFAIL 0x00010000 // MOSC Failure Reset
#define SYSCTL_RESC_HSSR 0x00001000 // HSSR Reset
#define SYSCTL_RESC_WDT1 0x00000020 // Watchdog Timer 1 Reset
#define SYSCTL_RESC_SW 0x00000010 // Software Reset
#define SYSCTL_RESC_WDT0 0x00000008 // Watchdog Timer 0 Reset
#define SYSCTL_RESC_BOR 0x00000004 // Brown-Out Reset
#define SYSCTL_RESC_POR 0x00000002 // Power-On Reset
#define SYSCTL_RESC_EXT 0x00000001 // External Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PWRTC register.
//
//*****************************************************************************
#define SYSCTL_PWRTC_VDDA_UBOR 0x00000010 // VDDA Under BOR Status
#define SYSCTL_PWRTC_VDD_UBOR 0x00000001 // VDD Under BOR Status
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_NMIC register.
//
//*****************************************************************************
#define SYSCTL_NMIC_MOSCFAIL 0x00010000 // MOSC Failure NMI
#define SYSCTL_NMIC_TAMPER 0x00000200 // Tamper Event NMI
#define SYSCTL_NMIC_WDT1 0x00000020 // Watch Dog Timer (WDT) 1 NMI
#define SYSCTL_NMIC_WDT0 0x00000008 // Watch Dog Timer (WDT) 0 NMI
#define SYSCTL_NMIC_POWER 0x00000004 // Power/Brown Out Event NMI
#define SYSCTL_NMIC_EXTERNAL 0x00000001 // External Pin NMI
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_MOSCCTL register.
//
//*****************************************************************************
#define SYSCTL_MOSCCTL_OSCRNG 0x00000010 // Oscillator Range
#define SYSCTL_MOSCCTL_PWRDN 0x00000008 // Power Down
#define SYSCTL_MOSCCTL_NOXTAL 0x00000004 // No Crystal Connected
#define SYSCTL_MOSCCTL_MOSCIM 0x00000002 // MOSC Failure Action
#define SYSCTL_MOSCCTL_CVAL 0x00000001 // Clock Validation for MOSC
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RSCLKCFG
// register.
//
//*****************************************************************************
#define SYSCTL_RSCLKCFG_MEMTIMU 0x80000000 // Memory Timing Register Update
#define SYSCTL_RSCLKCFG_NEWFREQ 0x40000000 // New PLLFREQ Accept
#define SYSCTL_RSCLKCFG_ACG 0x20000000 // Auto Clock Gating
#define SYSCTL_RSCLKCFG_USEPLL 0x10000000 // Use PLL
#define SYSCTL_RSCLKCFG_PLLSRC_M \
0x0F000000 // PLL Source
#define SYSCTL_RSCLKCFG_PLLSRC_PIOSC \
0x00000000 // PIOSC is PLL input clock source
#define SYSCTL_RSCLKCFG_PLLSRC_MOSC \
0x03000000 // MOSC is the PLL input clock
// source
#define SYSCTL_RSCLKCFG_OSCSRC_M \
0x00F00000 // Oscillator Source
#define SYSCTL_RSCLKCFG_OSCSRC_PIOSC \
0x00000000 // PIOSC is oscillator source
#define SYSCTL_RSCLKCFG_OSCSRC_LFIOSC \
0x00200000 // LFIOSC is oscillator source
#define SYSCTL_RSCLKCFG_OSCSRC_MOSC \
0x00300000 // MOSC is oscillator source
#define SYSCTL_RSCLKCFG_OSCSRC_RTC \
0x00400000 // Hibernation Module RTC
// Oscillator (RTCOSC)
#define SYSCTL_RSCLKCFG_OSYSDIV_M \
0x000FFC00 // Oscillator System Clock Divisor
#define SYSCTL_RSCLKCFG_PSYSDIV_M \
0x000003FF // PLL System Clock Divisor
#define SYSCTL_RSCLKCFG_OSYSDIV_S \
10
#define SYSCTL_RSCLKCFG_PSYSDIV_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_MEMTIM0 register.
//
//*****************************************************************************
#define SYSCTL_MEMTIM0_EBCHT_M 0x03C00000 // EEPROM Clock High Time
#define SYSCTL_MEMTIM0_EBCHT_0_5 \
0x00000000 // 1/2 system clock period
#define SYSCTL_MEMTIM0_EBCHT_1 0x00400000 // 1 system clock period
#define SYSCTL_MEMTIM0_EBCHT_1_5 \
0x00800000 // 1.5 system clock periods
#define SYSCTL_MEMTIM0_EBCHT_2 0x00C00000 // 2 system clock periods
#define SYSCTL_MEMTIM0_EBCHT_2_5 \
0x01000000 // 2.5 system clock periods
#define SYSCTL_MEMTIM0_EBCHT_3 0x01400000 // 3 system clock periods
#define SYSCTL_MEMTIM0_EBCHT_3_5 \
0x01800000 // 3.5 system clock periods
#define SYSCTL_MEMTIM0_EBCHT_4 0x01C00000 // 4 system clock periods
#define SYSCTL_MEMTIM0_EBCHT_4_5 \
0x02000000 // 4.5 system clock periods
#define SYSCTL_MEMTIM0_EBCE 0x00200000 // EEPROM Bank Clock Edge
#define SYSCTL_MEMTIM0_MB1 0x00100010 // Must be one
#define SYSCTL_MEMTIM0_EWS_M 0x000F0000 // EEPROM Wait States
#define SYSCTL_MEMTIM0_FBCHT_M 0x000003C0 // Flash Bank Clock High Time
#define SYSCTL_MEMTIM0_FBCHT_0_5 \
0x00000000 // 1/2 system clock period
#define SYSCTL_MEMTIM0_FBCHT_1 0x00000040 // 1 system clock period
#define SYSCTL_MEMTIM0_FBCHT_1_5 \
0x00000080 // 1.5 system clock periods
#define SYSCTL_MEMTIM0_FBCHT_2 0x000000C0 // 2 system clock periods
#define SYSCTL_MEMTIM0_FBCHT_2_5 \
0x00000100 // 2.5 system clock periods
#define SYSCTL_MEMTIM0_FBCHT_3 0x00000140 // 3 system clock periods
#define SYSCTL_MEMTIM0_FBCHT_3_5 \
0x00000180 // 3.5 system clock periods
#define SYSCTL_MEMTIM0_FBCHT_4 0x000001C0 // 4 system clock periods
#define SYSCTL_MEMTIM0_FBCHT_4_5 \
0x00000200 // 4.5 system clock periods
#define SYSCTL_MEMTIM0_FBCE 0x00000020 // Flash Bank Clock Edge
#define SYSCTL_MEMTIM0_FWS_M 0x0000000F // Flash Wait State
#define SYSCTL_MEMTIM0_EWS_S 16
#define SYSCTL_MEMTIM0_FWS_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_ALTCLKCFG
// register.
//
//*****************************************************************************
#define SYSCTL_ALTCLKCFG_ALTCLK_M \
0x0000000F // Alternate Clock Source
#define SYSCTL_ALTCLKCFG_ALTCLK_PIOSC \
0x00000000 // PIOSC
#define SYSCTL_ALTCLKCFG_ALTCLK_RTCOSC \
0x00000003 // Hibernation Module Real-time
// clock output (RTCOSC)
#define SYSCTL_ALTCLKCFG_ALTCLK_LFIOSC \
0x00000004 // Low-frequency internal
// oscillator (LFIOSC)
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DSCLKCFG
// register.
//
//*****************************************************************************
#define SYSCTL_DSCLKCFG_PIOSCPD 0x80000000 // PIOSC Power Down
#define SYSCTL_DSCLKCFG_MOSCDPD 0x40000000 // MOSC Disable Power Down
#define SYSCTL_DSCLKCFG_DSOSCSRC_M \
0x00F00000 // Deep Sleep Oscillator Source
#define SYSCTL_DSCLKCFG_DSOSCSRC_PIOSC \
0x00000000 // PIOSC
#define SYSCTL_DSCLKCFG_DSOSCSRC_LFIOSC \
0x00200000 // LFIOSC
#define SYSCTL_DSCLKCFG_DSOSCSRC_MOSC \
0x00300000 // MOSC
#define SYSCTL_DSCLKCFG_DSOSCSRC_RTC \
0x00400000 // Hibernation Module RTCOSC
#define SYSCTL_DSCLKCFG_DSSYSDIV_M \
0x000003FF // Deep Sleep Clock Divisor
#define SYSCTL_DSCLKCFG_DSSYSDIV_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DIVSCLK register.
//
//*****************************************************************************
#define SYSCTL_DIVSCLK_EN 0x80000000 // DIVSCLK Enable
#define SYSCTL_DIVSCLK_SRC_M 0x00030000 // Clock Source
#define SYSCTL_DIVSCLK_SRC_SYSCLK \
0x00000000 // System Clock
#define SYSCTL_DIVSCLK_SRC_PIOSC \
0x00010000 // PIOSC
#define SYSCTL_DIVSCLK_SRC_MOSC 0x00020000 // MOSC
#define SYSCTL_DIVSCLK_DIV_M 0x000000FF // Divisor Value
#define SYSCTL_DIVSCLK_DIV_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SYSPROP register.
//
//*****************************************************************************
#define SYSCTL_SYSPROP_FPU 0x00000001 // FPU Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PIOSCCAL
// register.
//
//*****************************************************************************
#define SYSCTL_PIOSCCAL_UTEN 0x80000000 // Use User Trim Value
#define SYSCTL_PIOSCCAL_CAL 0x00000200 // Start Calibration
#define SYSCTL_PIOSCCAL_UPDATE 0x00000100 // Update Trim
#define SYSCTL_PIOSCCAL_UT_M 0x0000007F // User Trim Value
#define SYSCTL_PIOSCCAL_UT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PIOSCSTAT
// register.
//
//*****************************************************************************
#define SYSCTL_PIOSCSTAT_DT_M 0x007F0000 // Default Trim Value
#define SYSCTL_PIOSCSTAT_CR_M 0x00000300 // Calibration Result
#define SYSCTL_PIOSCSTAT_CRNONE 0x00000000 // Calibration has not been
// attempted
#define SYSCTL_PIOSCSTAT_CRPASS 0x00000100 // The last calibration operation
// completed to meet 1% accuracy
#define SYSCTL_PIOSCSTAT_CRFAIL 0x00000200 // The last calibration operation
// failed to meet 1% accuracy
#define SYSCTL_PIOSCSTAT_CT_M 0x0000007F // Calibration Trim Value
#define SYSCTL_PIOSCSTAT_DT_S 16
#define SYSCTL_PIOSCSTAT_CT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PLLFREQ0
// register.
//
//*****************************************************************************
#define SYSCTL_PLLFREQ0_PLLPWR 0x00800000 // PLL Power
#define SYSCTL_PLLFREQ0_MFRAC_M 0x000FFC00 // PLL M Fractional Value
#define SYSCTL_PLLFREQ0_MINT_M 0x000003FF // PLL M Integer Value
#define SYSCTL_PLLFREQ0_MFRAC_S 10
#define SYSCTL_PLLFREQ0_MINT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PLLFREQ1
// register.
//
//*****************************************************************************
#define SYSCTL_PLLFREQ1_Q_M 0x00001F00 // PLL Q Value
#define SYSCTL_PLLFREQ1_N_M 0x0000001F // PLL N Value
#define SYSCTL_PLLFREQ1_Q_S 8
#define SYSCTL_PLLFREQ1_N_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PLLSTAT register.
//
//*****************************************************************************
#define SYSCTL_PLLSTAT_LOCK 0x00000001 // PLL Lock
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SLPPWRCFG
// register.
//
//*****************************************************************************
#define SYSCTL_SLPPWRCFG_FLASHPM_M \
0x00000030 // Flash Power Modes
#define SYSCTL_SLPPWRCFG_FLASHPM_NRM \
0x00000000 // Active Mode
#define SYSCTL_SLPPWRCFG_FLASHPM_SLP \
0x00000020 // Low Power Mode
#define SYSCTL_SLPPWRCFG_SRAMPM_M \
0x00000003 // SRAM Power Modes
#define SYSCTL_SLPPWRCFG_SRAMPM_NRM \
0x00000000 // Active Mode
#define SYSCTL_SLPPWRCFG_SRAMPM_SBY \
0x00000001 // Standby Mode
#define SYSCTL_SLPPWRCFG_SRAMPM_LP \
0x00000003 // Low Power Mode
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DSLPPWRCFG
// register.
//
//*****************************************************************************
#define SYSCTL_DSLPPWRCFG_LDOSM 0x00000200 // LDO Sleep Mode
#define SYSCTL_DSLPPWRCFG_TSPD 0x00000100 // Temperature Sense Power Down
#define SYSCTL_DSLPPWRCFG_FLASHPM_M \
0x00000030 // Flash Power Modes
#define SYSCTL_DSLPPWRCFG_FLASHPM_NRM \
0x00000000 // Active Mode
#define SYSCTL_DSLPPWRCFG_FLASHPM_SLP \
0x00000020 // Low Power Mode
#define SYSCTL_DSLPPWRCFG_SRAMPM_M \
0x00000003 // SRAM Power Modes
#define SYSCTL_DSLPPWRCFG_SRAMPM_NRM \
0x00000000 // Active Mode
#define SYSCTL_DSLPPWRCFG_SRAMPM_SBY \
0x00000001 // Standby Mode
#define SYSCTL_DSLPPWRCFG_SRAMPM_LP \
0x00000003 // Low Power Mode
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_NVMSTAT register.
//
//*****************************************************************************
#define SYSCTL_NVMSTAT_FWB 0x00000001 // 32 Word Flash Write Buffer
// Available
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_LDOSPCTL
// register.
//
//*****************************************************************************
#define SYSCTL_LDOSPCTL_VADJEN 0x80000000 // Voltage Adjust Enable
#define SYSCTL_LDOSPCTL_VLDO_M 0x000000FF // LDO Output Voltage
#define SYSCTL_LDOSPCTL_VLDO_0_90V \
0x00000012 // 0.90 V
#define SYSCTL_LDOSPCTL_VLDO_0_95V \
0x00000013 // 0.95 V
#define SYSCTL_LDOSPCTL_VLDO_1_00V \
0x00000014 // 1.00 V
#define SYSCTL_LDOSPCTL_VLDO_1_05V \
0x00000015 // 1.05 V
#define SYSCTL_LDOSPCTL_VLDO_1_10V \
0x00000016 // 1.10 V
#define SYSCTL_LDOSPCTL_VLDO_1_15V \
0x00000017 // 1.15 V
#define SYSCTL_LDOSPCTL_VLDO_1_20V \
0x00000018 // 1.20 V
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_LDODPCTL
// register.
//
//*****************************************************************************
#define SYSCTL_LDODPCTL_VADJEN 0x80000000 // Voltage Adjust Enable
#define SYSCTL_LDODPCTL_VLDO_M 0x000000FF // LDO Output Voltage
#define SYSCTL_LDODPCTL_VLDO_0_90V \
0x00000012 // 0.90 V
#define SYSCTL_LDODPCTL_VLDO_0_95V \
0x00000013 // 0.95 V
#define SYSCTL_LDODPCTL_VLDO_1_00V \
0x00000014 // 1.00 V
#define SYSCTL_LDODPCTL_VLDO_1_05V \
0x00000015 // 1.05 V
#define SYSCTL_LDODPCTL_VLDO_1_10V \
0x00000016 // 1.10 V
#define SYSCTL_LDODPCTL_VLDO_1_15V \
0x00000017 // 1.15 V
#define SYSCTL_LDODPCTL_VLDO_1_20V \
0x00000018 // 1.20 V
#define SYSCTL_LDODPCTL_VLDO_1_25V \
0x00000019 // 1.25 V
#define SYSCTL_LDODPCTL_VLDO_1_30V \
0x0000001A // 1.30 V
#define SYSCTL_LDODPCTL_VLDO_1_35V \
0x0000001B // 1.35 V
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RESBEHAVCTL
// register.
//
//*****************************************************************************
#define SYSCTL_RESBEHAVCTL_WDOG1_M \
0x000000C0 // Watchdog 1 Reset Operation
#define SYSCTL_RESBEHAVCTL_WDOG1_SYSRST \
0x00000080 // Watchdog 1 issues a system
// reset. The application starts
// within 10 us
#define SYSCTL_RESBEHAVCTL_WDOG1_POR \
0x000000C0 // Watchdog 1 issues a simulated
// POR sequence. Application starts
// less than 500 us after
// deassertion (Default)
#define SYSCTL_RESBEHAVCTL_WDOG0_M \
0x00000030 // Watchdog 0 Reset Operation
#define SYSCTL_RESBEHAVCTL_WDOG0_SYSRST \
0x00000020 // Watchdog 0 issues a system
// reset. The application starts
// within 10 us
#define SYSCTL_RESBEHAVCTL_WDOG0_POR \
0x00000030 // Watchdog 0 issues a simulated
// POR sequence. Application starts
// less than 500 us after
// deassertion (Default)
#define SYSCTL_RESBEHAVCTL_BOR_M \
0x0000000C // BOR Reset operation
#define SYSCTL_RESBEHAVCTL_BOR_SYSRST \
0x00000008 // Brown Out Reset issues system
// reset. The application starts
// within 10 us
#define SYSCTL_RESBEHAVCTL_BOR_POR \
0x0000000C // Brown Out Reset issues a
// simulated POR sequence. The
// application starts less than 500
// us after deassertion (Default)
#define SYSCTL_RESBEHAVCTL_EXTRES_M \
0x00000003 // External RST Pin Operation
#define SYSCTL_RESBEHAVCTL_EXTRES_SYSRST \
0x00000002 // External RST assertion issues a
// system reset. The application
// starts within 10 us
#define SYSCTL_RESBEHAVCTL_EXTRES_POR \
0x00000003 // External RST assertion issues a
// simulated POR sequence.
// Application starts less than 500
// us after deassertion (Default)
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_HSSR register.
//
//*****************************************************************************
#define SYSCTL_HSSR_KEY_M 0xFF000000 // Write Key
#define SYSCTL_HSSR_CDOFF_M 0x00FFFFFF // Command Descriptor Pointer
#define SYSCTL_HSSR_KEY_S 24
#define SYSCTL_HSSR_CDOFF_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_USBPDS register.
//
//*****************************************************************************
#define SYSCTL_USBPDS_MEMSTAT_M 0x0000000C // Memory Array Power Status
#define SYSCTL_USBPDS_MEMSTAT_OFF \
0x00000000 // Array OFF
#define SYSCTL_USBPDS_MEMSTAT_RETAIN \
0x00000004 // SRAM Retention
#define SYSCTL_USBPDS_MEMSTAT_ON \
0x0000000C // Array On
#define SYSCTL_USBPDS_PWRSTAT_M 0x00000003 // Power Domain Status
#define SYSCTL_USBPDS_PWRSTAT_OFF \
0x00000000 // OFF
#define SYSCTL_USBPDS_PWRSTAT_ON \
0x00000003 // ON
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_USBMPC register.
//
//*****************************************************************************
#define SYSCTL_USBMPC_PWRCTL_M 0x00000003 // Memory Array Power Control
#define SYSCTL_USBMPC_PWRCTL_OFF \
0x00000000 // Array OFF
#define SYSCTL_USBMPC_PWRCTL_RETAIN \
0x00000001 // SRAM Retention
#define SYSCTL_USBMPC_PWRCTL_ON 0x00000003 // Array On
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_EMACPDS register.
//
//*****************************************************************************
#define SYSCTL_EMACPDS_MEMSTAT_M \
0x0000000C // Memory Array Power Status
#define SYSCTL_EMACPDS_MEMSTAT_OFF \
0x00000000 // Array OFF
#define SYSCTL_EMACPDS_MEMSTAT_ON \
0x0000000C // Array On
#define SYSCTL_EMACPDS_PWRSTAT_M \
0x00000003 // Power Domain Status
#define SYSCTL_EMACPDS_PWRSTAT_OFF \
0x00000000 // OFF
#define SYSCTL_EMACPDS_PWRSTAT_ON \
0x00000003 // ON
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_EMACMPC register.
//
//*****************************************************************************
#define SYSCTL_EMACMPC_PWRCTL_M 0x00000003 // Memory Array Power Control
#define SYSCTL_EMACMPC_PWRCTL_OFF \
0x00000000 // Array OFF
#define SYSCTL_EMACMPC_PWRCTL_ON \
0x00000003 // Array On
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_LCDMPC register.
//
//*****************************************************************************
#define SYSCTL_LCDMPC_PWRCTL_M 0x00000003 // Memory Array Power Control
#define SYSCTL_LCDMPC_PWRCTL_OFF \
0x00000000 // Array OFF
#define SYSCTL_LCDMPC_PWRCTL_ON 0x00000003 // Array On
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPWD register.
//
//*****************************************************************************
#define SYSCTL_PPWD_P1 0x00000002 // Watchdog Timer 1 Present
#define SYSCTL_PPWD_P0 0x00000001 // Watchdog Timer 0 Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPTIMER register.
//
//*****************************************************************************
#define SYSCTL_PPTIMER_P7 0x00000080 // 16/32-Bit General-Purpose Timer
// 7 Present
#define SYSCTL_PPTIMER_P6 0x00000040 // 16/32-Bit General-Purpose Timer
// 6 Present
#define SYSCTL_PPTIMER_P5 0x00000020 // 16/32-Bit General-Purpose Timer
// 5 Present
#define SYSCTL_PPTIMER_P4 0x00000010 // 16/32-Bit General-Purpose Timer
// 4 Present
#define SYSCTL_PPTIMER_P3 0x00000008 // 16/32-Bit General-Purpose Timer
// 3 Present
#define SYSCTL_PPTIMER_P2 0x00000004 // 16/32-Bit General-Purpose Timer
// 2 Present
#define SYSCTL_PPTIMER_P1 0x00000002 // 16/32-Bit General-Purpose Timer
// 1 Present
#define SYSCTL_PPTIMER_P0 0x00000001 // 16/32-Bit General-Purpose Timer
// 0 Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPGPIO register.
//
//*****************************************************************************
#define SYSCTL_PPGPIO_P17 0x00020000 // GPIO Port T Present
#define SYSCTL_PPGPIO_P16 0x00010000 // GPIO Port S Present
#define SYSCTL_PPGPIO_P15 0x00008000 // GPIO Port R Present
#define SYSCTL_PPGPIO_P14 0x00004000 // GPIO Port Q Present
#define SYSCTL_PPGPIO_P13 0x00002000 // GPIO Port P Present
#define SYSCTL_PPGPIO_P12 0x00001000 // GPIO Port N Present
#define SYSCTL_PPGPIO_P11 0x00000800 // GPIO Port M Present
#define SYSCTL_PPGPIO_P10 0x00000400 // GPIO Port L Present
#define SYSCTL_PPGPIO_P9 0x00000200 // GPIO Port K Present
#define SYSCTL_PPGPIO_P8 0x00000100 // GPIO Port J Present
#define SYSCTL_PPGPIO_P7 0x00000080 // GPIO Port H Present
#define SYSCTL_PPGPIO_P6 0x00000040 // GPIO Port G Present
#define SYSCTL_PPGPIO_P5 0x00000020 // GPIO Port F Present
#define SYSCTL_PPGPIO_P4 0x00000010 // GPIO Port E Present
#define SYSCTL_PPGPIO_P3 0x00000008 // GPIO Port D Present
#define SYSCTL_PPGPIO_P2 0x00000004 // GPIO Port C Present
#define SYSCTL_PPGPIO_P1 0x00000002 // GPIO Port B Present
#define SYSCTL_PPGPIO_P0 0x00000001 // GPIO Port A Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPDMA register.
//
//*****************************************************************************
#define SYSCTL_PPDMA_P0 0x00000001 // uDMA Module Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPEPI register.
//
//*****************************************************************************
#define SYSCTL_PPEPI_P0 0x00000001 // EPI Module Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPHIB register.
//
//*****************************************************************************
#define SYSCTL_PPHIB_P0 0x00000001 // Hibernation Module Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPUART register.
//
//*****************************************************************************
#define SYSCTL_PPUART_P7 0x00000080 // UART Module 7 Present
#define SYSCTL_PPUART_P6 0x00000040 // UART Module 6 Present
#define SYSCTL_PPUART_P5 0x00000020 // UART Module 5 Present
#define SYSCTL_PPUART_P4 0x00000010 // UART Module 4 Present
#define SYSCTL_PPUART_P3 0x00000008 // UART Module 3 Present
#define SYSCTL_PPUART_P2 0x00000004 // UART Module 2 Present
#define SYSCTL_PPUART_P1 0x00000002 // UART Module 1 Present
#define SYSCTL_PPUART_P0 0x00000001 // UART Module 0 Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPSSI register.
//
//*****************************************************************************
#define SYSCTL_PPSSI_P3 0x00000008 // SSI Module 3 Present
#define SYSCTL_PPSSI_P2 0x00000004 // SSI Module 2 Present
#define SYSCTL_PPSSI_P1 0x00000002 // SSI Module 1 Present
#define SYSCTL_PPSSI_P0 0x00000001 // SSI Module 0 Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPI2C register.
//
//*****************************************************************************
#define SYSCTL_PPI2C_P9 0x00000200 // I2C Module 9 Present
#define SYSCTL_PPI2C_P8 0x00000100 // I2C Module 8 Present
#define SYSCTL_PPI2C_P7 0x00000080 // I2C Module 7 Present
#define SYSCTL_PPI2C_P6 0x00000040 // I2C Module 6 Present
#define SYSCTL_PPI2C_P5 0x00000020 // I2C Module 5 Present
#define SYSCTL_PPI2C_P4 0x00000010 // I2C Module 4 Present
#define SYSCTL_PPI2C_P3 0x00000008 // I2C Module 3 Present
#define SYSCTL_PPI2C_P2 0x00000004 // I2C Module 2 Present
#define SYSCTL_PPI2C_P1 0x00000002 // I2C Module 1 Present
#define SYSCTL_PPI2C_P0 0x00000001 // I2C Module 0 Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPUSB register.
//
//*****************************************************************************
#define SYSCTL_PPUSB_P0 0x00000001 // USB Module Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPEPHY register.
//
//*****************************************************************************
#define SYSCTL_PPEPHY_P0 0x00000001 // Ethernet PHY Module Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPCAN register.
//
//*****************************************************************************
#define SYSCTL_PPCAN_P1 0x00000002 // CAN Module 1 Present
#define SYSCTL_PPCAN_P0 0x00000001 // CAN Module 0 Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPADC register.
//
//*****************************************************************************
#define SYSCTL_PPADC_P1 0x00000002 // ADC Module 1 Present
#define SYSCTL_PPADC_P0 0x00000001 // ADC Module 0 Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPACMP register.
//
//*****************************************************************************
#define SYSCTL_PPACMP_P0 0x00000001 // Analog Comparator Module Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPPWM register.
//
//*****************************************************************************
#define SYSCTL_PPPWM_P0 0x00000001 // PWM Module 0 Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPQEI register.
//
//*****************************************************************************
#define SYSCTL_PPQEI_P0 0x00000001 // QEI Module 0 Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPEEPROM
// register.
//
//*****************************************************************************
#define SYSCTL_PPEEPROM_P0 0x00000001 // EEPROM Module Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPCCM register.
//
//*****************************************************************************
#define SYSCTL_PPCCM_P0 0x00000001 // CRC and Cryptographic Modules
// Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPLCD register.
//
//*****************************************************************************
#define SYSCTL_PPLCD_P0 0x00000001 // LCD Module Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPOWIRE register.
//
//*****************************************************************************
#define SYSCTL_PPOWIRE_P0 0x00000001 // 1-Wire Module Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPEMAC register.
//
//*****************************************************************************
#define SYSCTL_PPEMAC_P0 0x00000001 // Ethernet Controller Module
// Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRWD register.
//
//*****************************************************************************
#define SYSCTL_SRWD_R1 0x00000002 // Watchdog Timer 1 Software Reset
#define SYSCTL_SRWD_R0 0x00000001 // Watchdog Timer 0 Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRTIMER register.
//
//*****************************************************************************
#define SYSCTL_SRTIMER_R7 0x00000080 // 16/32-Bit General-Purpose Timer
// 7 Software Reset
#define SYSCTL_SRTIMER_R6 0x00000040 // 16/32-Bit General-Purpose Timer
// 6 Software Reset
#define SYSCTL_SRTIMER_R5 0x00000020 // 16/32-Bit General-Purpose Timer
// 5 Software Reset
#define SYSCTL_SRTIMER_R4 0x00000010 // 16/32-Bit General-Purpose Timer
// 4 Software Reset
#define SYSCTL_SRTIMER_R3 0x00000008 // 16/32-Bit General-Purpose Timer
// 3 Software Reset
#define SYSCTL_SRTIMER_R2 0x00000004 // 16/32-Bit General-Purpose Timer
// 2 Software Reset
#define SYSCTL_SRTIMER_R1 0x00000002 // 16/32-Bit General-Purpose Timer
// 1 Software Reset
#define SYSCTL_SRTIMER_R0 0x00000001 // 16/32-Bit General-Purpose Timer
// 0 Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRGPIO register.
//
//*****************************************************************************
#define SYSCTL_SRGPIO_R17 0x00020000 // GPIO Port T Software Reset
#define SYSCTL_SRGPIO_R16 0x00010000 // GPIO Port S Software Reset
#define SYSCTL_SRGPIO_R15 0x00008000 // GPIO Port R Software Reset
#define SYSCTL_SRGPIO_R14 0x00004000 // GPIO Port Q Software Reset
#define SYSCTL_SRGPIO_R13 0x00002000 // GPIO Port P Software Reset
#define SYSCTL_SRGPIO_R12 0x00001000 // GPIO Port N Software Reset
#define SYSCTL_SRGPIO_R11 0x00000800 // GPIO Port M Software Reset
#define SYSCTL_SRGPIO_R10 0x00000400 // GPIO Port L Software Reset
#define SYSCTL_SRGPIO_R9 0x00000200 // GPIO Port K Software Reset
#define SYSCTL_SRGPIO_R8 0x00000100 // GPIO Port J Software Reset
#define SYSCTL_SRGPIO_R7 0x00000080 // GPIO Port H Software Reset
#define SYSCTL_SRGPIO_R6 0x00000040 // GPIO Port G Software Reset
#define SYSCTL_SRGPIO_R5 0x00000020 // GPIO Port F Software Reset
#define SYSCTL_SRGPIO_R4 0x00000010 // GPIO Port E Software Reset
#define SYSCTL_SRGPIO_R3 0x00000008 // GPIO Port D Software Reset
#define SYSCTL_SRGPIO_R2 0x00000004 // GPIO Port C Software Reset
#define SYSCTL_SRGPIO_R1 0x00000002 // GPIO Port B Software Reset
#define SYSCTL_SRGPIO_R0 0x00000001 // GPIO Port A Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRDMA register.
//
//*****************************************************************************
#define SYSCTL_SRDMA_R0 0x00000001 // uDMA Module Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SREPI register.
//
//*****************************************************************************
#define SYSCTL_SREPI_R0 0x00000001 // EPI Module Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRHIB register.
//
//*****************************************************************************
#define SYSCTL_SRHIB_R0 0x00000001 // Hibernation Module Software
// Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRUART register.
//
//*****************************************************************************
#define SYSCTL_SRUART_R7 0x00000080 // UART Module 7 Software Reset
#define SYSCTL_SRUART_R6 0x00000040 // UART Module 6 Software Reset
#define SYSCTL_SRUART_R5 0x00000020 // UART Module 5 Software Reset
#define SYSCTL_SRUART_R4 0x00000010 // UART Module 4 Software Reset
#define SYSCTL_SRUART_R3 0x00000008 // UART Module 3 Software Reset
#define SYSCTL_SRUART_R2 0x00000004 // UART Module 2 Software Reset
#define SYSCTL_SRUART_R1 0x00000002 // UART Module 1 Software Reset
#define SYSCTL_SRUART_R0 0x00000001 // UART Module 0 Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRSSI register.
//
//*****************************************************************************
#define SYSCTL_SRSSI_R3 0x00000008 // SSI Module 3 Software Reset
#define SYSCTL_SRSSI_R2 0x00000004 // SSI Module 2 Software Reset
#define SYSCTL_SRSSI_R1 0x00000002 // SSI Module 1 Software Reset
#define SYSCTL_SRSSI_R0 0x00000001 // SSI Module 0 Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRI2C register.
//
//*****************************************************************************
#define SYSCTL_SRI2C_R9 0x00000200 // I2C Module 9 Software Reset
#define SYSCTL_SRI2C_R8 0x00000100 // I2C Module 8 Software Reset
#define SYSCTL_SRI2C_R7 0x00000080 // I2C Module 7 Software Reset
#define SYSCTL_SRI2C_R6 0x00000040 // I2C Module 6 Software Reset
#define SYSCTL_SRI2C_R5 0x00000020 // I2C Module 5 Software Reset
#define SYSCTL_SRI2C_R4 0x00000010 // I2C Module 4 Software Reset
#define SYSCTL_SRI2C_R3 0x00000008 // I2C Module 3 Software Reset
#define SYSCTL_SRI2C_R2 0x00000004 // I2C Module 2 Software Reset
#define SYSCTL_SRI2C_R1 0x00000002 // I2C Module 1 Software Reset
#define SYSCTL_SRI2C_R0 0x00000001 // I2C Module 0 Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRUSB register.
//
//*****************************************************************************
#define SYSCTL_SRUSB_R0 0x00000001 // USB Module Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SREPHY register.
//
//*****************************************************************************
#define SYSCTL_SREPHY_R0 0x00000001 // Ethernet PHY Module Software
// Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRCAN register.
//
//*****************************************************************************
#define SYSCTL_SRCAN_R1 0x00000002 // CAN Module 1 Software Reset
#define SYSCTL_SRCAN_R0 0x00000001 // CAN Module 0 Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRADC register.
//
//*****************************************************************************
#define SYSCTL_SRADC_R1 0x00000002 // ADC Module 1 Software Reset
#define SYSCTL_SRADC_R0 0x00000001 // ADC Module 0 Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRACMP register.
//
//*****************************************************************************
#define SYSCTL_SRACMP_R0 0x00000001 // Analog Comparator Module 0
// Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRPWM register.
//
//*****************************************************************************
#define SYSCTL_SRPWM_R0 0x00000001 // PWM Module 0 Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRQEI register.
//
//*****************************************************************************
#define SYSCTL_SRQEI_R0 0x00000001 // QEI Module 0 Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SREEPROM
// register.
//
//*****************************************************************************
#define SYSCTL_SREEPROM_R0 0x00000001 // EEPROM Module Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRCCM register.
//
//*****************************************************************************
#define SYSCTL_SRCCM_R0 0x00000001 // CRC and Cryptographic Modules
// Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRLCD register.
//
//*****************************************************************************
#define SYSCTL_SRLCD_R0 0x00000001 // LCD Module 0 Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SROWIRE register.
//
//*****************************************************************************
#define SYSCTL_SROWIRE_R0 0x00000001 // 1-Wire Module Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SREMAC register.
//
//*****************************************************************************
#define SYSCTL_SREMAC_R0 0x00000001 // Ethernet Controller MAC Module 0
// Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCWD register.
//
//*****************************************************************************
#define SYSCTL_RCGCWD_R1 0x00000002 // Watchdog Timer 1 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCWD_R0 0x00000001 // Watchdog Timer 0 Run Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCTIMER
// register.
//
//*****************************************************************************
#define SYSCTL_RCGCTIMER_R7 0x00000080 // 16/32-Bit General-Purpose Timer
// 7 Run Mode Clock Gating Control
#define SYSCTL_RCGCTIMER_R6 0x00000040 // 16/32-Bit General-Purpose Timer
// 6 Run Mode Clock Gating Control
#define SYSCTL_RCGCTIMER_R5 0x00000020 // 16/32-Bit General-Purpose Timer
// 5 Run Mode Clock Gating Control
#define SYSCTL_RCGCTIMER_R4 0x00000010 // 16/32-Bit General-Purpose Timer
// 4 Run Mode Clock Gating Control
#define SYSCTL_RCGCTIMER_R3 0x00000008 // 16/32-Bit General-Purpose Timer
// 3 Run Mode Clock Gating Control
#define SYSCTL_RCGCTIMER_R2 0x00000004 // 16/32-Bit General-Purpose Timer
// 2 Run Mode Clock Gating Control
#define SYSCTL_RCGCTIMER_R1 0x00000002 // 16/32-Bit General-Purpose Timer
// 1 Run Mode Clock Gating Control
#define SYSCTL_RCGCTIMER_R0 0x00000001 // 16/32-Bit General-Purpose Timer
// 0 Run Mode Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCGPIO
// register.
//
//*****************************************************************************
#define SYSCTL_RCGCGPIO_R17 0x00020000 // GPIO Port T Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R16 0x00010000 // GPIO Port S Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R15 0x00008000 // GPIO Port R Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R14 0x00004000 // GPIO Port Q Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R13 0x00002000 // GPIO Port P Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R12 0x00001000 // GPIO Port N Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R11 0x00000800 // GPIO Port M Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R10 0x00000400 // GPIO Port L Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R9 0x00000200 // GPIO Port K Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R8 0x00000100 // GPIO Port J Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R7 0x00000080 // GPIO Port H Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R6 0x00000040 // GPIO Port G Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R5 0x00000020 // GPIO Port F Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R4 0x00000010 // GPIO Port E Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R3 0x00000008 // GPIO Port D Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R2 0x00000004 // GPIO Port C Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R1 0x00000002 // GPIO Port B Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R0 0x00000001 // GPIO Port A Run Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCDMA register.
//
//*****************************************************************************
#define SYSCTL_RCGCDMA_R0 0x00000001 // uDMA Module Run Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCEPI register.
//
//*****************************************************************************
#define SYSCTL_RCGCEPI_R0 0x00000001 // EPI Module Run Mode Clock Gating
// Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCHIB register.
//
//*****************************************************************************
#define SYSCTL_RCGCHIB_R0 0x00000001 // Hibernation Module Run Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCUART
// register.
//
//*****************************************************************************
#define SYSCTL_RCGCUART_R7 0x00000080 // UART Module 7 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCUART_R6 0x00000040 // UART Module 6 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCUART_R5 0x00000020 // UART Module 5 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCUART_R4 0x00000010 // UART Module 4 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCUART_R3 0x00000008 // UART Module 3 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCUART_R2 0x00000004 // UART Module 2 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCUART_R1 0x00000002 // UART Module 1 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCUART_R0 0x00000001 // UART Module 0 Run Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCSSI register.
//
//*****************************************************************************
#define SYSCTL_RCGCSSI_R3 0x00000008 // SSI Module 3 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCSSI_R2 0x00000004 // SSI Module 2 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCSSI_R1 0x00000002 // SSI Module 1 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCSSI_R0 0x00000001 // SSI Module 0 Run Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCI2C register.
//
//*****************************************************************************
#define SYSCTL_RCGCI2C_R9 0x00000200 // I2C Module 9 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCI2C_R8 0x00000100 // I2C Module 8 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCI2C_R7 0x00000080 // I2C Module 7 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCI2C_R6 0x00000040 // I2C Module 6 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCI2C_R5 0x00000020 // I2C Module 5 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCI2C_R4 0x00000010 // I2C Module 4 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCI2C_R3 0x00000008 // I2C Module 3 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCI2C_R2 0x00000004 // I2C Module 2 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCI2C_R1 0x00000002 // I2C Module 1 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCI2C_R0 0x00000001 // I2C Module 0 Run Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCUSB register.
//
//*****************************************************************************
#define SYSCTL_RCGCUSB_R0 0x00000001 // USB Module Run Mode Clock Gating
// Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCEPHY
// register.
//
//*****************************************************************************
#define SYSCTL_RCGCEPHY_R0 0x00000001 // Ethernet PHY Module Run Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCCAN register.
//
//*****************************************************************************
#define SYSCTL_RCGCCAN_R1 0x00000002 // CAN Module 1 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCCAN_R0 0x00000001 // CAN Module 0 Run Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCADC register.
//
//*****************************************************************************
#define SYSCTL_RCGCADC_R1 0x00000002 // ADC Module 1 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCADC_R0 0x00000001 // ADC Module 0 Run Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCACMP
// register.
//
//*****************************************************************************
#define SYSCTL_RCGCACMP_R0 0x00000001 // Analog Comparator Module 0 Run
// Mode Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCPWM register.
//
//*****************************************************************************
#define SYSCTL_RCGCPWM_R0 0x00000001 // PWM Module 0 Run Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCQEI register.
//
//*****************************************************************************
#define SYSCTL_RCGCQEI_R0 0x00000001 // QEI Module 0 Run Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCEEPROM
// register.
//
//*****************************************************************************
#define SYSCTL_RCGCEEPROM_R0 0x00000001 // EEPROM Module Run Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCCCM register.
//
//*****************************************************************************
#define SYSCTL_RCGCCCM_R0 0x00000001 // CRC and Cryptographic Modules
// Run Mode Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCLCD register.
//
//*****************************************************************************
#define SYSCTL_RCGCLCD_R0 0x00000001 // LCD Controller Module 0 Run Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCOWIRE
// register.
//
//*****************************************************************************
#define SYSCTL_RCGCOWIRE_R0 0x00000001 // 1-Wire Module 0 Run Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCEMAC
// register.
//
//*****************************************************************************
#define SYSCTL_RCGCEMAC_R0 0x00000001 // Ethernet MAC Module 0 Run Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCWD register.
//
//*****************************************************************************
#define SYSCTL_SCGCWD_S1 0x00000002 // Watchdog Timer 1 Sleep Mode
// Clock Gating Control
#define SYSCTL_SCGCWD_S0 0x00000001 // Watchdog Timer 0 Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCTIMER
// register.
//
//*****************************************************************************
#define SYSCTL_SCGCTIMER_S7 0x00000080 // 16/32-Bit General-Purpose Timer
// 7 Sleep Mode Clock Gating
// Control
#define SYSCTL_SCGCTIMER_S6 0x00000040 // 16/32-Bit General-Purpose Timer
// 6 Sleep Mode Clock Gating
// Control
#define SYSCTL_SCGCTIMER_S5 0x00000020 // 16/32-Bit General-Purpose Timer
// 5 Sleep Mode Clock Gating
// Control
#define SYSCTL_SCGCTIMER_S4 0x00000010 // 16/32-Bit General-Purpose Timer
// 4 Sleep Mode Clock Gating
// Control
#define SYSCTL_SCGCTIMER_S3 0x00000008 // 16/32-Bit General-Purpose Timer
// 3 Sleep Mode Clock Gating
// Control
#define SYSCTL_SCGCTIMER_S2 0x00000004 // 16/32-Bit General-Purpose Timer
// 2 Sleep Mode Clock Gating
// Control
#define SYSCTL_SCGCTIMER_S1 0x00000002 // 16/32-Bit General-Purpose Timer
// 1 Sleep Mode Clock Gating
// Control
#define SYSCTL_SCGCTIMER_S0 0x00000001 // 16/32-Bit General-Purpose Timer
// 0 Sleep Mode Clock Gating
// Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCGPIO
// register.
//
//*****************************************************************************
#define SYSCTL_SCGCGPIO_S17 0x00020000 // GPIO Port T Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S16 0x00010000 // GPIO Port S Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S15 0x00008000 // GPIO Port R Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S14 0x00004000 // GPIO Port Q Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S13 0x00002000 // GPIO Port P Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S12 0x00001000 // GPIO Port N Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S11 0x00000800 // GPIO Port M Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S10 0x00000400 // GPIO Port L Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S9 0x00000200 // GPIO Port K Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S8 0x00000100 // GPIO Port J Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S7 0x00000080 // GPIO Port H Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S6 0x00000040 // GPIO Port G Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S5 0x00000020 // GPIO Port F Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S4 0x00000010 // GPIO Port E Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S3 0x00000008 // GPIO Port D Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S2 0x00000004 // GPIO Port C Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S1 0x00000002 // GPIO Port B Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S0 0x00000001 // GPIO Port A Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCDMA register.
//
//*****************************************************************************
#define SYSCTL_SCGCDMA_S0 0x00000001 // uDMA Module Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCEPI register.
//
//*****************************************************************************
#define SYSCTL_SCGCEPI_S0 0x00000001 // EPI Module Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCHIB register.
//
//*****************************************************************************
#define SYSCTL_SCGCHIB_S0 0x00000001 // Hibernation Module Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCUART
// register.
//
//*****************************************************************************
#define SYSCTL_SCGCUART_S7 0x00000080 // UART Module 7 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCUART_S6 0x00000040 // UART Module 6 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCUART_S5 0x00000020 // UART Module 5 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCUART_S4 0x00000010 // UART Module 4 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCUART_S3 0x00000008 // UART Module 3 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCUART_S2 0x00000004 // UART Module 2 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCUART_S1 0x00000002 // UART Module 1 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCUART_S0 0x00000001 // UART Module 0 Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCSSI register.
//
//*****************************************************************************
#define SYSCTL_SCGCSSI_S3 0x00000008 // SSI Module 3 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCSSI_S2 0x00000004 // SSI Module 2 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCSSI_S1 0x00000002 // SSI Module 1 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCSSI_S0 0x00000001 // SSI Module 0 Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCI2C register.
//
//*****************************************************************************
#define SYSCTL_SCGCI2C_S9 0x00000200 // I2C Module 9 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCI2C_S8 0x00000100 // I2C Module 8 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCI2C_S7 0x00000080 // I2C Module 7 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCI2C_S6 0x00000040 // I2C Module 6 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCI2C_S5 0x00000020 // I2C Module 5 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCI2C_S4 0x00000010 // I2C Module 4 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCI2C_S3 0x00000008 // I2C Module 3 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCI2C_S2 0x00000004 // I2C Module 2 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCI2C_S1 0x00000002 // I2C Module 1 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCI2C_S0 0x00000001 // I2C Module 0 Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCUSB register.
//
//*****************************************************************************
#define SYSCTL_SCGCUSB_S0 0x00000001 // USB Module Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCEPHY
// register.
//
//*****************************************************************************
#define SYSCTL_SCGCEPHY_S0 0x00000001 // PHY Module Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCCAN register.
//
//*****************************************************************************
#define SYSCTL_SCGCCAN_S1 0x00000002 // CAN Module 1 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCCAN_S0 0x00000001 // CAN Module 0 Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCADC register.
//
//*****************************************************************************
#define SYSCTL_SCGCADC_S1 0x00000002 // ADC Module 1 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCADC_S0 0x00000001 // ADC Module 0 Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCACMP
// register.
//
//*****************************************************************************
#define SYSCTL_SCGCACMP_S0 0x00000001 // Analog Comparator Module 0 Sleep
// Mode Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCPWM register.
//
//*****************************************************************************
#define SYSCTL_SCGCPWM_S0 0x00000001 // PWM Module 0 Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCQEI register.
//
//*****************************************************************************
#define SYSCTL_SCGCQEI_S0 0x00000001 // QEI Module 0 Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCEEPROM
// register.
//
//*****************************************************************************
#define SYSCTL_SCGCEEPROM_S0 0x00000001 // EEPROM Module Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCCCM register.
//
//*****************************************************************************
#define SYSCTL_SCGCCCM_S0 0x00000001 // CRC and Cryptographic Modules
// Sleep Mode Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCLCD register.
//
//*****************************************************************************
#define SYSCTL_SCGCLCD_S0 0x00000001 // LCD Controller Module 0 Sleep
// Mode Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCOWIRE
// register.
//
//*****************************************************************************
#define SYSCTL_SCGCOWIRE_S0 0x00000001 // 1-Wire Module 0 Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCEMAC
// register.
//
//*****************************************************************************
#define SYSCTL_SCGCEMAC_S0 0x00000001 // Ethernet MAC Module 0 Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCWD register.
//
//*****************************************************************************
#define SYSCTL_DCGCWD_D1 0x00000002 // Watchdog Timer 1 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCWD_D0 0x00000001 // Watchdog Timer 0 Deep-Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCTIMER
// register.
//
//*****************************************************************************
#define SYSCTL_DCGCTIMER_D7 0x00000080 // 16/32-Bit General-Purpose Timer
// 7 Deep-Sleep Mode Clock Gating
// Control
#define SYSCTL_DCGCTIMER_D6 0x00000040 // 16/32-Bit General-Purpose Timer
// 6 Deep-Sleep Mode Clock Gating
// Control
#define SYSCTL_DCGCTIMER_D5 0x00000020 // 16/32-Bit General-Purpose Timer
// 5 Deep-Sleep Mode Clock Gating
// Control
#define SYSCTL_DCGCTIMER_D4 0x00000010 // 16/32-Bit General-Purpose Timer
// 4 Deep-Sleep Mode Clock Gating
// Control
#define SYSCTL_DCGCTIMER_D3 0x00000008 // 16/32-Bit General-Purpose Timer
// 3 Deep-Sleep Mode Clock Gating
// Control
#define SYSCTL_DCGCTIMER_D2 0x00000004 // 16/32-Bit General-Purpose Timer
// 2 Deep-Sleep Mode Clock Gating
// Control
#define SYSCTL_DCGCTIMER_D1 0x00000002 // 16/32-Bit General-Purpose Timer
// 1 Deep-Sleep Mode Clock Gating
// Control
#define SYSCTL_DCGCTIMER_D0 0x00000001 // 16/32-Bit General-Purpose Timer
// 0 Deep-Sleep Mode Clock Gating
// Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCGPIO
// register.
//
//*****************************************************************************
#define SYSCTL_DCGCGPIO_D17 0x00020000 // GPIO Port T Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D16 0x00010000 // GPIO Port S Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D15 0x00008000 // GPIO Port R Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D14 0x00004000 // GPIO Port Q Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D13 0x00002000 // GPIO Port P Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D12 0x00001000 // GPIO Port N Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D11 0x00000800 // GPIO Port M Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D10 0x00000400 // GPIO Port L Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D9 0x00000200 // GPIO Port K Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D8 0x00000100 // GPIO Port J Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D7 0x00000080 // GPIO Port H Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D6 0x00000040 // GPIO Port G Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D5 0x00000020 // GPIO Port F Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D4 0x00000010 // GPIO Port E Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D3 0x00000008 // GPIO Port D Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D2 0x00000004 // GPIO Port C Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D1 0x00000002 // GPIO Port B Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D0 0x00000001 // GPIO Port A Deep-Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCDMA register.
//
//*****************************************************************************
#define SYSCTL_DCGCDMA_D0 0x00000001 // uDMA Module Deep-Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCEPI register.
//
//*****************************************************************************
#define SYSCTL_DCGCEPI_D0 0x00000001 // EPI Module Deep-Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCHIB register.
//
//*****************************************************************************
#define SYSCTL_DCGCHIB_D0 0x00000001 // Hibernation Module Deep-Sleep
// Mode Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCUART
// register.
//
//*****************************************************************************
#define SYSCTL_DCGCUART_D7 0x00000080 // UART Module 7 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCUART_D6 0x00000040 // UART Module 6 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCUART_D5 0x00000020 // UART Module 5 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCUART_D4 0x00000010 // UART Module 4 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCUART_D3 0x00000008 // UART Module 3 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCUART_D2 0x00000004 // UART Module 2 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCUART_D1 0x00000002 // UART Module 1 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCUART_D0 0x00000001 // UART Module 0 Deep-Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCSSI register.
//
//*****************************************************************************
#define SYSCTL_DCGCSSI_D3 0x00000008 // SSI Module 3 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCSSI_D2 0x00000004 // SSI Module 2 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCSSI_D1 0x00000002 // SSI Module 1 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCSSI_D0 0x00000001 // SSI Module 0 Deep-Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCI2C register.
//
//*****************************************************************************
#define SYSCTL_DCGCI2C_D9 0x00000200 // I2C Module 9 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCI2C_D8 0x00000100 // I2C Module 8 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCI2C_D7 0x00000080 // I2C Module 7 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCI2C_D6 0x00000040 // I2C Module 6 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCI2C_D5 0x00000020 // I2C Module 5 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCI2C_D4 0x00000010 // I2C Module 4 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCI2C_D3 0x00000008 // I2C Module 3 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCI2C_D2 0x00000004 // I2C Module 2 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCI2C_D1 0x00000002 // I2C Module 1 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCI2C_D0 0x00000001 // I2C Module 0 Deep-Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCUSB register.
//
//*****************************************************************************
#define SYSCTL_DCGCUSB_D0 0x00000001 // USB Module Deep-Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCEPHY
// register.
//
//*****************************************************************************
#define SYSCTL_DCGCEPHY_D0 0x00000001 // PHY Module Deep-Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCCAN register.
//
//*****************************************************************************
#define SYSCTL_DCGCCAN_D1 0x00000002 // CAN Module 1 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCCAN_D0 0x00000001 // CAN Module 0 Deep-Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCADC register.
//
//*****************************************************************************
#define SYSCTL_DCGCADC_D1 0x00000002 // ADC Module 1 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCADC_D0 0x00000001 // ADC Module 0 Deep-Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCACMP
// register.
//
//*****************************************************************************
#define SYSCTL_DCGCACMP_D0 0x00000001 // Analog Comparator Module 0
// Deep-Sleep Mode Clock Gating
// Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCPWM register.
//
//*****************************************************************************
#define SYSCTL_DCGCPWM_D0 0x00000001 // PWM Module 0 Deep-Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCQEI register.
//
//*****************************************************************************
#define SYSCTL_DCGCQEI_D0 0x00000001 // QEI Module 0 Deep-Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCEEPROM
// register.
//
//*****************************************************************************
#define SYSCTL_DCGCEEPROM_D0 0x00000001 // EEPROM Module Deep-Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCCCM register.
//
//*****************************************************************************
#define SYSCTL_DCGCCCM_D0 0x00000001 // CRC and Cryptographic Modules
// Deep-Sleep Mode Clock Gating
// Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCLCD register.
//
//*****************************************************************************
#define SYSCTL_DCGCLCD_D0 0x00000001 // LCD Controller Module 0
// Deep-Sleep Mode Clock Gating
// Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCOWIRE
// register.
//
//*****************************************************************************
#define SYSCTL_DCGCOWIRE_D0 0x00000001 // 1-Wire Module 0 Deep-Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCEMAC
// register.
//
//*****************************************************************************
#define SYSCTL_DCGCEMAC_D0 0x00000001 // Ethernet MAC Module 0 Deep-Sleep
// Mode Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCWD register.
//
//*****************************************************************************
#define SYSCTL_PCWD_P1 0x00000002 // Watchdog Timer 1 Power Control
#define SYSCTL_PCWD_P0 0x00000001 // Watchdog Timer 0 Power Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCTIMER register.
//
//*****************************************************************************
#define SYSCTL_PCTIMER_P7 0x00000080 // General-Purpose Timer 7 Power
// Control
#define SYSCTL_PCTIMER_P6 0x00000040 // General-Purpose Timer 6 Power
// Control
#define SYSCTL_PCTIMER_P5 0x00000020 // General-Purpose Timer 5 Power
// Control
#define SYSCTL_PCTIMER_P4 0x00000010 // General-Purpose Timer 4 Power
// Control
#define SYSCTL_PCTIMER_P3 0x00000008 // General-Purpose Timer 3 Power
// Control
#define SYSCTL_PCTIMER_P2 0x00000004 // General-Purpose Timer 2 Power
// Control
#define SYSCTL_PCTIMER_P1 0x00000002 // General-Purpose Timer 1 Power
// Control
#define SYSCTL_PCTIMER_P0 0x00000001 // General-Purpose Timer 0 Power
// Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCGPIO register.
//
//*****************************************************************************
#define SYSCTL_PCGPIO_P17 0x00020000 // GPIO Port T Power Control
#define SYSCTL_PCGPIO_P16 0x00010000 // GPIO Port S Power Control
#define SYSCTL_PCGPIO_P15 0x00008000 // GPIO Port R Power Control
#define SYSCTL_PCGPIO_P14 0x00004000 // GPIO Port Q Power Control
#define SYSCTL_PCGPIO_P13 0x00002000 // GPIO Port P Power Control
#define SYSCTL_PCGPIO_P12 0x00001000 // GPIO Port N Power Control
#define SYSCTL_PCGPIO_P11 0x00000800 // GPIO Port M Power Control
#define SYSCTL_PCGPIO_P10 0x00000400 // GPIO Port L Power Control
#define SYSCTL_PCGPIO_P9 0x00000200 // GPIO Port K Power Control
#define SYSCTL_PCGPIO_P8 0x00000100 // GPIO Port J Power Control
#define SYSCTL_PCGPIO_P7 0x00000080 // GPIO Port H Power Control
#define SYSCTL_PCGPIO_P6 0x00000040 // GPIO Port G Power Control
#define SYSCTL_PCGPIO_P5 0x00000020 // GPIO Port F Power Control
#define SYSCTL_PCGPIO_P4 0x00000010 // GPIO Port E Power Control
#define SYSCTL_PCGPIO_P3 0x00000008 // GPIO Port D Power Control
#define SYSCTL_PCGPIO_P2 0x00000004 // GPIO Port C Power Control
#define SYSCTL_PCGPIO_P1 0x00000002 // GPIO Port B Power Control
#define SYSCTL_PCGPIO_P0 0x00000001 // GPIO Port A Power Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCDMA register.
//
//*****************************************************************************
#define SYSCTL_PCDMA_P0 0x00000001 // uDMA Module Power Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCEPI register.
//
//*****************************************************************************
#define SYSCTL_PCEPI_P0 0x00000001 // EPI Module Power Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCHIB register.
//
//*****************************************************************************
#define SYSCTL_PCHIB_P0 0x00000001 // Hibernation Module Power Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCUART register.
//
//*****************************************************************************
#define SYSCTL_PCUART_P7 0x00000080 // UART Module 7 Power Control
#define SYSCTL_PCUART_P6 0x00000040 // UART Module 6 Power Control
#define SYSCTL_PCUART_P5 0x00000020 // UART Module 5 Power Control
#define SYSCTL_PCUART_P4 0x00000010 // UART Module 4 Power Control
#define SYSCTL_PCUART_P3 0x00000008 // UART Module 3 Power Control
#define SYSCTL_PCUART_P2 0x00000004 // UART Module 2 Power Control
#define SYSCTL_PCUART_P1 0x00000002 // UART Module 1 Power Control
#define SYSCTL_PCUART_P0 0x00000001 // UART Module 0 Power Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCSSI register.
//
//*****************************************************************************
#define SYSCTL_PCSSI_P3 0x00000008 // SSI Module 3 Power Control
#define SYSCTL_PCSSI_P2 0x00000004 // SSI Module 2 Power Control
#define SYSCTL_PCSSI_P1 0x00000002 // SSI Module 1 Power Control
#define SYSCTL_PCSSI_P0 0x00000001 // SSI Module 0 Power Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCI2C register.
//
//*****************************************************************************
#define SYSCTL_PCI2C_P9 0x00000200 // I2C Module 9 Power Control
#define SYSCTL_PCI2C_P8 0x00000100 // I2C Module 8 Power Control
#define SYSCTL_PCI2C_P7 0x00000080 // I2C Module 7 Power Control
#define SYSCTL_PCI2C_P6 0x00000040 // I2C Module 6 Power Control
#define SYSCTL_PCI2C_P5 0x00000020 // I2C Module 5 Power Control
#define SYSCTL_PCI2C_P4 0x00000010 // I2C Module 4 Power Control
#define SYSCTL_PCI2C_P3 0x00000008 // I2C Module 3 Power Control
#define SYSCTL_PCI2C_P2 0x00000004 // I2C Module 2 Power Control
#define SYSCTL_PCI2C_P1 0x00000002 // I2C Module 1 Power Control
#define SYSCTL_PCI2C_P0 0x00000001 // I2C Module 0 Power Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCUSB register.
//
//*****************************************************************************
#define SYSCTL_PCUSB_P0 0x00000001 // USB Module Power Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCEPHY register.
//
//*****************************************************************************
#define SYSCTL_PCEPHY_P0 0x00000001 // Ethernet PHY Module Power
// Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCCAN register.
//
//*****************************************************************************
#define SYSCTL_PCCAN_P1 0x00000002 // CAN Module 1 Power Control
#define SYSCTL_PCCAN_P0 0x00000001 // CAN Module 0 Power Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCADC register.
//
//*****************************************************************************
#define SYSCTL_PCADC_P1 0x00000002 // ADC Module 1 Power Control
#define SYSCTL_PCADC_P0 0x00000001 // ADC Module 0 Power Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCACMP register.
//
//*****************************************************************************
#define SYSCTL_PCACMP_P0 0x00000001 // Analog Comparator Module 0 Power
// Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCPWM register.
//
//*****************************************************************************
#define SYSCTL_PCPWM_P0 0x00000001 // PWM Module 0 Power Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCQEI register.
//
//*****************************************************************************
#define SYSCTL_PCQEI_P0 0x00000001 // QEI Module 0 Power Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCEEPROM
// register.
//
//*****************************************************************************
#define SYSCTL_PCEEPROM_P0 0x00000001 // EEPROM Module 0 Power Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCCCM register.
//
//*****************************************************************************
#define SYSCTL_PCCCM_P0 0x00000001 // CRC and Cryptographic Modules
// Power Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCLCD register.
//
//*****************************************************************************
#define SYSCTL_PCLCD_P0 0x00000001 // LCD Controller Module 0 Power
// Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCOWIRE register.
//
//*****************************************************************************
#define SYSCTL_PCOWIRE_P0 0x00000001 // 1-Wire Module 0 Power Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCEMAC register.
//
//*****************************************************************************
#define SYSCTL_PCEMAC_P0 0x00000001 // Ethernet MAC Module 0 Power
// Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRWD register.
//
//*****************************************************************************
#define SYSCTL_PRWD_R1 0x00000002 // Watchdog Timer 1 Peripheral
// Ready
#define SYSCTL_PRWD_R0 0x00000001 // Watchdog Timer 0 Peripheral
// Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRTIMER register.
//
//*****************************************************************************
#define SYSCTL_PRTIMER_R7 0x00000080 // 16/32-Bit General-Purpose Timer
// 7 Peripheral Ready
#define SYSCTL_PRTIMER_R6 0x00000040 // 16/32-Bit General-Purpose Timer
// 6 Peripheral Ready
#define SYSCTL_PRTIMER_R5 0x00000020 // 16/32-Bit General-Purpose Timer
// 5 Peripheral Ready
#define SYSCTL_PRTIMER_R4 0x00000010 // 16/32-Bit General-Purpose Timer
// 4 Peripheral Ready
#define SYSCTL_PRTIMER_R3 0x00000008 // 16/32-Bit General-Purpose Timer
// 3 Peripheral Ready
#define SYSCTL_PRTIMER_R2 0x00000004 // 16/32-Bit General-Purpose Timer
// 2 Peripheral Ready
#define SYSCTL_PRTIMER_R1 0x00000002 // 16/32-Bit General-Purpose Timer
// 1 Peripheral Ready
#define SYSCTL_PRTIMER_R0 0x00000001 // 16/32-Bit General-Purpose Timer
// 0 Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRGPIO register.
//
//*****************************************************************************
#define SYSCTL_PRGPIO_R17 0x00020000 // GPIO Port T Peripheral Ready
#define SYSCTL_PRGPIO_R16 0x00010000 // GPIO Port S Peripheral Ready
#define SYSCTL_PRGPIO_R15 0x00008000 // GPIO Port R Peripheral Ready
#define SYSCTL_PRGPIO_R14 0x00004000 // GPIO Port Q Peripheral Ready
#define SYSCTL_PRGPIO_R13 0x00002000 // GPIO Port P Peripheral Ready
#define SYSCTL_PRGPIO_R12 0x00001000 // GPIO Port N Peripheral Ready
#define SYSCTL_PRGPIO_R11 0x00000800 // GPIO Port M Peripheral Ready
#define SYSCTL_PRGPIO_R10 0x00000400 // GPIO Port L Peripheral Ready
#define SYSCTL_PRGPIO_R9 0x00000200 // GPIO Port K Peripheral Ready
#define SYSCTL_PRGPIO_R8 0x00000100 // GPIO Port J Peripheral Ready
#define SYSCTL_PRGPIO_R7 0x00000080 // GPIO Port H Peripheral Ready
#define SYSCTL_PRGPIO_R6 0x00000040 // GPIO Port G Peripheral Ready
#define SYSCTL_PRGPIO_R5 0x00000020 // GPIO Port F Peripheral Ready
#define SYSCTL_PRGPIO_R4 0x00000010 // GPIO Port E Peripheral Ready
#define SYSCTL_PRGPIO_R3 0x00000008 // GPIO Port D Peripheral Ready
#define SYSCTL_PRGPIO_R2 0x00000004 // GPIO Port C Peripheral Ready
#define SYSCTL_PRGPIO_R1 0x00000002 // GPIO Port B Peripheral Ready
#define SYSCTL_PRGPIO_R0 0x00000001 // GPIO Port A Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRDMA register.
//
//*****************************************************************************
#define SYSCTL_PRDMA_R0 0x00000001 // uDMA Module Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PREPI register.
//
//*****************************************************************************
#define SYSCTL_PREPI_R0 0x00000001 // EPI Module Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRHIB register.
//
//*****************************************************************************
#define SYSCTL_PRHIB_R0 0x00000001 // Hibernation Module Peripheral
// Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRUART register.
//
//*****************************************************************************
#define SYSCTL_PRUART_R7 0x00000080 // UART Module 7 Peripheral Ready
#define SYSCTL_PRUART_R6 0x00000040 // UART Module 6 Peripheral Ready
#define SYSCTL_PRUART_R5 0x00000020 // UART Module 5 Peripheral Ready
#define SYSCTL_PRUART_R4 0x00000010 // UART Module 4 Peripheral Ready
#define SYSCTL_PRUART_R3 0x00000008 // UART Module 3 Peripheral Ready
#define SYSCTL_PRUART_R2 0x00000004 // UART Module 2 Peripheral Ready
#define SYSCTL_PRUART_R1 0x00000002 // UART Module 1 Peripheral Ready
#define SYSCTL_PRUART_R0 0x00000001 // UART Module 0 Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRSSI register.
//
//*****************************************************************************
#define SYSCTL_PRSSI_R3 0x00000008 // SSI Module 3 Peripheral Ready
#define SYSCTL_PRSSI_R2 0x00000004 // SSI Module 2 Peripheral Ready
#define SYSCTL_PRSSI_R1 0x00000002 // SSI Module 1 Peripheral Ready
#define SYSCTL_PRSSI_R0 0x00000001 // SSI Module 0 Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRI2C register.
//
//*****************************************************************************
#define SYSCTL_PRI2C_R9 0x00000200 // I2C Module 9 Peripheral Ready
#define SYSCTL_PRI2C_R8 0x00000100 // I2C Module 8 Peripheral Ready
#define SYSCTL_PRI2C_R7 0x00000080 // I2C Module 7 Peripheral Ready
#define SYSCTL_PRI2C_R6 0x00000040 // I2C Module 6 Peripheral Ready
#define SYSCTL_PRI2C_R5 0x00000020 // I2C Module 5 Peripheral Ready
#define SYSCTL_PRI2C_R4 0x00000010 // I2C Module 4 Peripheral Ready
#define SYSCTL_PRI2C_R3 0x00000008 // I2C Module 3 Peripheral Ready
#define SYSCTL_PRI2C_R2 0x00000004 // I2C Module 2 Peripheral Ready
#define SYSCTL_PRI2C_R1 0x00000002 // I2C Module 1 Peripheral Ready
#define SYSCTL_PRI2C_R0 0x00000001 // I2C Module 0 Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRUSB register.
//
//*****************************************************************************
#define SYSCTL_PRUSB_R0 0x00000001 // USB Module Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PREPHY register.
//
//*****************************************************************************
#define SYSCTL_PREPHY_R0 0x00000001 // Ethernet PHY Module Peripheral
// Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRCAN register.
//
//*****************************************************************************
#define SYSCTL_PRCAN_R1 0x00000002 // CAN Module 1 Peripheral Ready
#define SYSCTL_PRCAN_R0 0x00000001 // CAN Module 0 Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRADC register.
//
//*****************************************************************************
#define SYSCTL_PRADC_R1 0x00000002 // ADC Module 1 Peripheral Ready
#define SYSCTL_PRADC_R0 0x00000001 // ADC Module 0 Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRACMP register.
//
//*****************************************************************************
#define SYSCTL_PRACMP_R0 0x00000001 // Analog Comparator Module 0
// Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRPWM register.
//
//*****************************************************************************
#define SYSCTL_PRPWM_R0 0x00000001 // PWM Module 0 Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRQEI register.
//
//*****************************************************************************
#define SYSCTL_PRQEI_R0 0x00000001 // QEI Module 0 Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PREEPROM
// register.
//
//*****************************************************************************
#define SYSCTL_PREEPROM_R0 0x00000001 // EEPROM Module Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRCCM register.
//
//*****************************************************************************
#define SYSCTL_PRCCM_R0 0x00000001 // CRC and Cryptographic Modules
// Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRLCD register.
//
//*****************************************************************************
#define SYSCTL_PRLCD_R0 0x00000001 // LCD Controller Module 0
// Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PROWIRE register.
//
//*****************************************************************************
#define SYSCTL_PROWIRE_R0 0x00000001 // 1-Wire Module 0 Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PREMAC register.
//
//*****************************************************************************
#define SYSCTL_PREMAC_R0 0x00000001 // Ethernet MAC Module 0 Peripheral
// Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_STAT register.
//
//*****************************************************************************
#define UDMA_STAT_DMACHANS_M 0x001F0000 // Available uDMA Channels Minus 1
#define UDMA_STAT_STATE_M 0x000000F0 // Control State Machine Status
#define UDMA_STAT_STATE_IDLE 0x00000000 // Idle
#define UDMA_STAT_STATE_RD_CTRL 0x00000010 // Reading channel controller data
#define UDMA_STAT_STATE_RD_SRCENDP \
0x00000020 // Reading source end pointer
#define UDMA_STAT_STATE_RD_DSTENDP \
0x00000030 // Reading destination end pointer
#define UDMA_STAT_STATE_RD_SRCDAT \
0x00000040 // Reading source data
#define UDMA_STAT_STATE_WR_DSTDAT \
0x00000050 // Writing destination data
#define UDMA_STAT_STATE_WAIT 0x00000060 // Waiting for uDMA request to
// clear
#define UDMA_STAT_STATE_WR_CTRL 0x00000070 // Writing channel controller data
#define UDMA_STAT_STATE_STALL 0x00000080 // Stalled
#define UDMA_STAT_STATE_DONE 0x00000090 // Done
#define UDMA_STAT_STATE_UNDEF 0x000000A0 // Undefined
#define UDMA_STAT_MASTEN 0x00000001 // Master Enable Status
#define UDMA_STAT_DMACHANS_S 16
//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_CFG register.
//
//*****************************************************************************
#define UDMA_CFG_MASTEN 0x00000001 // Controller Master Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_CTLBASE register.
//
//*****************************************************************************
#define UDMA_CTLBASE_ADDR_M 0xFFFFFC00 // Channel Control Base Address
#define UDMA_CTLBASE_ADDR_S 10
//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_ALTBASE register.
//
//*****************************************************************************
#define UDMA_ALTBASE_ADDR_M 0xFFFFFFFF // Alternate Channel Address
// Pointer
#define UDMA_ALTBASE_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_WAITSTAT register.
//
//*****************************************************************************
#define UDMA_WAITSTAT_WAITREQ_M 0xFFFFFFFF // Channel [n] Wait Status
//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_SWREQ register.
//
//*****************************************************************************
#define UDMA_SWREQ_M 0xFFFFFFFF // Channel [n] Software Request
//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_USEBURSTSET
// register.
//
//*****************************************************************************
#define UDMA_USEBURSTSET_SET_M 0xFFFFFFFF // Channel [n] Useburst Set
//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_USEBURSTCLR
// register.
//
//*****************************************************************************
#define UDMA_USEBURSTCLR_CLR_M 0xFFFFFFFF // Channel [n] Useburst Clear
//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_REQMASKSET
// register.
//
//*****************************************************************************
#define UDMA_REQMASKSET_SET_M 0xFFFFFFFF // Channel [n] Request Mask Set
//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_REQMASKCLR
// register.
//
//*****************************************************************************
#define UDMA_REQMASKCLR_CLR_M 0xFFFFFFFF // Channel [n] Request Mask Clear
//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_ENASET register.
//
//*****************************************************************************
#define UDMA_ENASET_SET_M 0xFFFFFFFF // Channel [n] Enable Set
//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_ENACLR register.
//
//*****************************************************************************
#define UDMA_ENACLR_CLR_M 0xFFFFFFFF // Clear Channel [n] Enable Clear
//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_ALTSET register.
//
//*****************************************************************************
#define UDMA_ALTSET_SET_M 0xFFFFFFFF // Channel [n] Alternate Set
//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_ALTCLR register.
//
//*****************************************************************************
#define UDMA_ALTCLR_CLR_M 0xFFFFFFFF // Channel [n] Alternate Clear
//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_PRIOSET register.
//
//*****************************************************************************
#define UDMA_PRIOSET_SET_M 0xFFFFFFFF // Channel [n] Priority Set
//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_PRIOCLR register.
//
//*****************************************************************************
#define UDMA_PRIOCLR_CLR_M 0xFFFFFFFF // Channel [n] Priority Clear
//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_ERRCLR register.
//
//*****************************************************************************
#define UDMA_ERRCLR_ERRCLR 0x00000001 // uDMA Bus Error Status
//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_CHASGN register.
//
//*****************************************************************************
#define UDMA_CHASGN_M 0xFFFFFFFF // Channel [n] Assignment Select
#define UDMA_CHASGN_PRIMARY 0x00000000 // Use the primary channel
// assignment
#define UDMA_CHASGN_SECONDARY 0x00000001 // Use the secondary channel
// assignment
//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_CHMAP0 register.
//
//*****************************************************************************
#define UDMA_CHMAP0_CH7SEL_M 0xF0000000 // uDMA Channel 7 Source Select
#define UDMA_CHMAP0_CH6SEL_M 0x0F000000 // uDMA Channel 6 Source Select
#define UDMA_CHMAP0_CH5SEL_M 0x00F00000 // uDMA Channel 5 Source Select
#define UDMA_CHMAP0_CH4SEL_M 0x000F0000 // uDMA Channel 4 Source Select
#define UDMA_CHMAP0_CH3SEL_M 0x0000F000 // uDMA Channel 3 Source Select
#define UDMA_CHMAP0_CH2SEL_M 0x00000F00 // uDMA Channel 2 Source Select
#define UDMA_CHMAP0_CH1SEL_M 0x000000F0 // uDMA Channel 1 Source Select
#define UDMA_CHMAP0_CH0SEL_M 0x0000000F // uDMA Channel 0 Source Select
#define UDMA_CHMAP0_CH7SEL_S 28
#define UDMA_CHMAP0_CH6SEL_S 24
#define UDMA_CHMAP0_CH5SEL_S 20
#define UDMA_CHMAP0_CH4SEL_S 16
#define UDMA_CHMAP0_CH3SEL_S 12
#define UDMA_CHMAP0_CH2SEL_S 8
#define UDMA_CHMAP0_CH1SEL_S 4
#define UDMA_CHMAP0_CH0SEL_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_CHMAP1 register.
//
//*****************************************************************************
#define UDMA_CHMAP1_CH15SEL_M 0xF0000000 // uDMA Channel 15 Source Select
#define UDMA_CHMAP1_CH14SEL_M 0x0F000000 // uDMA Channel 14 Source Select
#define UDMA_CHMAP1_CH13SEL_M 0x00F00000 // uDMA Channel 13 Source Select
#define UDMA_CHMAP1_CH12SEL_M 0x000F0000 // uDMA Channel 12 Source Select
#define UDMA_CHMAP1_CH11SEL_M 0x0000F000 // uDMA Channel 11 Source Select
#define UDMA_CHMAP1_CH10SEL_M 0x00000F00 // uDMA Channel 10 Source Select
#define UDMA_CHMAP1_CH9SEL_M 0x000000F0 // uDMA Channel 9 Source Select
#define UDMA_CHMAP1_CH8SEL_M 0x0000000F // uDMA Channel 8 Source Select
#define UDMA_CHMAP1_CH15SEL_S 28
#define UDMA_CHMAP1_CH14SEL_S 24
#define UDMA_CHMAP1_CH13SEL_S 20
#define UDMA_CHMAP1_CH12SEL_S 16
#define UDMA_CHMAP1_CH11SEL_S 12
#define UDMA_CHMAP1_CH10SEL_S 8
#define UDMA_CHMAP1_CH9SEL_S 4
#define UDMA_CHMAP1_CH8SEL_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_CHMAP2 register.
//
//*****************************************************************************
#define UDMA_CHMAP2_CH23SEL_M 0xF0000000 // uDMA Channel 23 Source Select
#define UDMA_CHMAP2_CH22SEL_M 0x0F000000 // uDMA Channel 22 Source Select
#define UDMA_CHMAP2_CH21SEL_M 0x00F00000 // uDMA Channel 21 Source Select
#define UDMA_CHMAP2_CH20SEL_M 0x000F0000 // uDMA Channel 20 Source Select
#define UDMA_CHMAP2_CH19SEL_M 0x0000F000 // uDMA Channel 19 Source Select
#define UDMA_CHMAP2_CH18SEL_M 0x00000F00 // uDMA Channel 18 Source Select
#define UDMA_CHMAP2_CH17SEL_M 0x000000F0 // uDMA Channel 17 Source Select
#define UDMA_CHMAP2_CH16SEL_M 0x0000000F // uDMA Channel 16 Source Select
#define UDMA_CHMAP2_CH23SEL_S 28
#define UDMA_CHMAP2_CH22SEL_S 24
#define UDMA_CHMAP2_CH21SEL_S 20
#define UDMA_CHMAP2_CH20SEL_S 16
#define UDMA_CHMAP2_CH19SEL_S 12
#define UDMA_CHMAP2_CH18SEL_S 8
#define UDMA_CHMAP2_CH17SEL_S 4
#define UDMA_CHMAP2_CH16SEL_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_CHMAP3 register.
//
//*****************************************************************************
#define UDMA_CHMAP3_CH31SEL_M 0xF0000000 // uDMA Channel 31 Source Select
#define UDMA_CHMAP3_CH30SEL_M 0x0F000000 // uDMA Channel 30 Source Select
#define UDMA_CHMAP3_CH29SEL_M 0x00F00000 // uDMA Channel 29 Source Select
#define UDMA_CHMAP3_CH28SEL_M 0x000F0000 // uDMA Channel 28 Source Select
#define UDMA_CHMAP3_CH27SEL_M 0x0000F000 // uDMA Channel 27 Source Select
#define UDMA_CHMAP3_CH26SEL_M 0x00000F00 // uDMA Channel 26 Source Select
#define UDMA_CHMAP3_CH25SEL_M 0x000000F0 // uDMA Channel 25 Source Select
#define UDMA_CHMAP3_CH24SEL_M 0x0000000F // uDMA Channel 24 Source Select
#define UDMA_CHMAP3_CH31SEL_S 28
#define UDMA_CHMAP3_CH30SEL_S 24
#define UDMA_CHMAP3_CH29SEL_S 20
#define UDMA_CHMAP3_CH28SEL_S 16
#define UDMA_CHMAP3_CH27SEL_S 12
#define UDMA_CHMAP3_CH26SEL_S 8
#define UDMA_CHMAP3_CH25SEL_S 4
#define UDMA_CHMAP3_CH24SEL_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_O_SRCENDP register.
//
//*****************************************************************************
#define UDMA_SRCENDP_ADDR_M 0xFFFFFFFF // Source Address End Pointer
#define UDMA_SRCENDP_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_O_DSTENDP register.
//
//*****************************************************************************
#define UDMA_DSTENDP_ADDR_M 0xFFFFFFFF // Destination Address End Pointer
#define UDMA_DSTENDP_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_O_CHCTL register.
//
//*****************************************************************************
#define UDMA_CHCTL_DSTINC_M 0xC0000000 // Destination Address Increment
#define UDMA_CHCTL_DSTINC_8 0x00000000 // Byte
#define UDMA_CHCTL_DSTINC_16 0x40000000 // Half-word
#define UDMA_CHCTL_DSTINC_32 0x80000000 // Word
#define UDMA_CHCTL_DSTINC_NONE 0xC0000000 // No increment
#define UDMA_CHCTL_DSTSIZE_M 0x30000000 // Destination Data Size
#define UDMA_CHCTL_DSTSIZE_8 0x00000000 // Byte
#define UDMA_CHCTL_DSTSIZE_16 0x10000000 // Half-word
#define UDMA_CHCTL_DSTSIZE_32 0x20000000 // Word
#define UDMA_CHCTL_SRCINC_M 0x0C000000 // Source Address Increment
#define UDMA_CHCTL_SRCINC_8 0x00000000 // Byte
#define UDMA_CHCTL_SRCINC_16 0x04000000 // Half-word
#define UDMA_CHCTL_SRCINC_32 0x08000000 // Word
#define UDMA_CHCTL_SRCINC_NONE 0x0C000000 // No increment
#define UDMA_CHCTL_SRCSIZE_M 0x03000000 // Source Data Size
#define UDMA_CHCTL_SRCSIZE_8 0x00000000 // Byte
#define UDMA_CHCTL_SRCSIZE_16 0x01000000 // Half-word
#define UDMA_CHCTL_SRCSIZE_32 0x02000000 // Word
#define UDMA_CHCTL_DSTPROT0 0x00200000 // Destination Privilege Access
#define UDMA_CHCTL_SRCPROT0 0x00040000 // Source Privilege Access
#define UDMA_CHCTL_ARBSIZE_M 0x0003C000 // Arbitration Size
#define UDMA_CHCTL_ARBSIZE_1 0x00000000 // 1 Transfer
#define UDMA_CHCTL_ARBSIZE_2 0x00004000 // 2 Transfers
#define UDMA_CHCTL_ARBSIZE_4 0x00008000 // 4 Transfers
#define UDMA_CHCTL_ARBSIZE_8 0x0000C000 // 8 Transfers
#define UDMA_CHCTL_ARBSIZE_16 0x00010000 // 16 Transfers
#define UDMA_CHCTL_ARBSIZE_32 0x00014000 // 32 Transfers
#define UDMA_CHCTL_ARBSIZE_64 0x00018000 // 64 Transfers
#define UDMA_CHCTL_ARBSIZE_128 0x0001C000 // 128 Transfers
#define UDMA_CHCTL_ARBSIZE_256 0x00020000 // 256 Transfers
#define UDMA_CHCTL_ARBSIZE_512 0x00024000 // 512 Transfers
#define UDMA_CHCTL_ARBSIZE_1024 0x00028000 // 1024 Transfers
#define UDMA_CHCTL_XFERSIZE_M 0x00003FF0 // Transfer Size (minus 1)
#define UDMA_CHCTL_NXTUSEBURST 0x00000008 // Next Useburst
#define UDMA_CHCTL_XFERMODE_M 0x00000007 // uDMA Transfer Mode
#define UDMA_CHCTL_XFERMODE_STOP \
0x00000000 // Stop
#define UDMA_CHCTL_XFERMODE_BASIC \
0x00000001 // Basic
#define UDMA_CHCTL_XFERMODE_AUTO \
0x00000002 // Auto-Request
#define UDMA_CHCTL_XFERMODE_PINGPONG \
0x00000003 // Ping-Pong
#define UDMA_CHCTL_XFERMODE_MEM_SG \
0x00000004 // Memory Scatter-Gather
#define UDMA_CHCTL_XFERMODE_MEM_SGA \
0x00000005 // Alternate Memory Scatter-Gather
#define UDMA_CHCTL_XFERMODE_PER_SG \
0x00000006 // Peripheral Scatter-Gather
#define UDMA_CHCTL_XFERMODE_PER_SGA \
0x00000007 // Alternate Peripheral
// Scatter-Gather
#define UDMA_CHCTL_XFERSIZE_S 4
//*****************************************************************************
//
// The following are defines for the bit fields in the CCM_CGREQ
// register.
//
//*****************************************************************************
#define CCM_CGREQ_DESCFG 0x00000004 // DES Clock Gating Request
#define CCM_CGREQ_AESCFG 0x00000002 // AES Clock Gating Request
#define CCM_CGREQ_SHACFG 0x00000001 // SHA/MD5 Clock Gating Request
//*****************************************************************************
//
// The following are defines for the bit fields in the CRC_CTRL register.
//
//*****************************************************************************
#define CRC_CTRL_INIT_M 0x00006000 // CRC Initialization
#define CRC_CTRL_INIT_SEED 0x00000000 // Use the CRCSEED register context
// as the starting value
#define CRC_CTRL_INIT_0 0x00004000 // Initialize to all '0s'
#define CRC_CTRL_INIT_1 0x00006000 // Initialize to all '1s'
#define CRC_CTRL_SIZE 0x00001000 // Input Data Size
#define CRC_CTRL_RESINV 0x00000200 // Result Inverse Enable
#define CRC_CTRL_OBR 0x00000100 // Output Reverse Enable
#define CRC_CTRL_BR 0x00000080 // Bit reverse enable
#define CRC_CTRL_ENDIAN_M 0x00000030 // Endian Control
#define CRC_CTRL_ENDIAN_SBHW 0x00000000 // Configuration unchanged. (B3,
// B2, B1, B0)
#define CRC_CTRL_ENDIAN_SHW 0x00000010 // Bytes are swapped in half-words
// but half-words are not swapped
// (B2, B3, B0, B1)
#define CRC_CTRL_ENDIAN_SHWNB \
0x00000020 // Half-words are swapped but bytes
// are not swapped in half-word.
// (B1, B0, B3, B2)
#define CRC_CTRL_ENDIAN_SBSW 0x00000030 // Bytes are swapped in half-words
// and half-words are swapped. (B0,
// B1, B2, B3)
#define CRC_CTRL_TYPE_M 0x0000000F // Operation Type
#define CRC_CTRL_TYPE_P8055 0x00000000 // Polynomial 0x8005
#define CRC_CTRL_TYPE_P1021 0x00000001 // Polynomial 0x1021
#define CRC_CTRL_TYPE_P4C11DB7 \
0x00000002 // Polynomial 0x4C11DB7
#define CRC_CTRL_TYPE_P1EDC6F41 \
0x00000003 // Polynomial 0x1EDC6F41
#define CRC_CTRL_TYPE_TCPCHKSUM \
0x00000008 // TCP checksum
//*****************************************************************************
//
// The following are defines for the bit fields in the CRC_SEED register.
//
//*****************************************************************************
#define CRC_SEED_SEED_M 0xFFFFFFFF // SEED/Context Value
#define CRC_SEED_SEED_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CRC_DIN register.
//
//*****************************************************************************
#define CRC_DIN_DATAIN_M 0xFFFFFFFF // Data Input
#define CRC_DIN_DATAIN_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CRC_RSLTPP
// register.
//
//*****************************************************************************
#define CRC_RSLTPP_RSLTPP_M 0xFFFFFFFF // Post Processing Result
#define CRC_RSLTPP_RSLTPP_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_ODIGEST_A
// register.
//
//*****************************************************************************
#define SHAMD5_ODIGEST_A_DATA_M 0xFFFFFFFF // Digest/Key Data
#define SHAMD5_ODIGEST_A_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_ODIGEST_B
// register.
//
//*****************************************************************************
#define SHAMD5_ODIGEST_B_DATA_M 0xFFFFFFFF // Digest/Key Data
#define SHAMD5_ODIGEST_B_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_ODIGEST_C
// register.
//
//*****************************************************************************
#define SHAMD5_ODIGEST_C_DATA_M 0xFFFFFFFF // Digest/Key Data
#define SHAMD5_ODIGEST_C_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_ODIGEST_D
// register.
//
//*****************************************************************************
#define SHAMD5_ODIGEST_D_DATA_M 0xFFFFFFFF // Digest/Key Data
#define SHAMD5_ODIGEST_D_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_ODIGEST_E
// register.
//
//*****************************************************************************
#define SHAMD5_ODIGEST_E_DATA_M 0xFFFFFFFF // Digest/Key Data
#define SHAMD5_ODIGEST_E_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_ODIGEST_F
// register.
//
//*****************************************************************************
#define SHAMD5_ODIGEST_F_DATA_M 0xFFFFFFFF // Digest/Key Data
#define SHAMD5_ODIGEST_F_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_ODIGEST_G
// register.
//
//*****************************************************************************
#define SHAMD5_ODIGEST_G_DATA_M 0xFFFFFFFF // Digest/Key Data
#define SHAMD5_ODIGEST_G_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_ODIGEST_H
// register.
//
//*****************************************************************************
#define SHAMD5_ODIGEST_H_DATA_M 0xFFFFFFFF // Digest/Key Data
#define SHAMD5_ODIGEST_H_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_IDIGEST_A
// register.
//
//*****************************************************************************
#define SHAMD5_IDIGEST_A_DATA_M 0xFFFFFFFF // Digest/Key Data
#define SHAMD5_IDIGEST_A_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_IDIGEST_B
// register.
//
//*****************************************************************************
#define SHAMD5_IDIGEST_B_DATA_M 0xFFFFFFFF // Digest/Key Data
#define SHAMD5_IDIGEST_B_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_IDIGEST_C
// register.
//
//*****************************************************************************
#define SHAMD5_IDIGEST_C_DATA_M 0xFFFFFFFF // Digest/Key Data
#define SHAMD5_IDIGEST_C_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_IDIGEST_D
// register.
//
//*****************************************************************************
#define SHAMD5_IDIGEST_D_DATA_M 0xFFFFFFFF // Digest/Key Data
#define SHAMD5_IDIGEST_D_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_IDIGEST_E
// register.
//
//*****************************************************************************
#define SHAMD5_IDIGEST_E_DATA_M 0xFFFFFFFF // Digest/Key Data
#define SHAMD5_IDIGEST_E_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_IDIGEST_F
// register.
//
//*****************************************************************************
#define SHAMD5_IDIGEST_F_DATA_M 0xFFFFFFFF // Digest/Key Data
#define SHAMD5_IDIGEST_F_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_IDIGEST_G
// register.
//
//*****************************************************************************
#define SHAMD5_IDIGEST_G_DATA_M 0xFFFFFFFF // Digest/Key Data
#define SHAMD5_IDIGEST_G_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_IDIGEST_H
// register.
//
//*****************************************************************************
#define SHAMD5_IDIGEST_H_DATA_M 0xFFFFFFFF // Digest/Key Data
#define SHAMD5_IDIGEST_H_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_DIGEST_COUNT
// register.
//
//*****************************************************************************
#define SHAMD5_DIGEST_COUNT_M 0xFFFFFFFF // Digest Count
#define SHAMD5_DIGEST_COUNT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_MODE register.
//
//*****************************************************************************
#define SHAMD5_MODE_HMAC_OUTER_HASH \
0x00000080 // HMAC Outer Hash Processing
// Enable
#define SHAMD5_MODE_HMAC_KEY_PROC \
0x00000020 // HMAC Key Processing Enable
#define SHAMD5_MODE_CLOSE_HASH 0x00000010 // Performs the padding, the
// Hash/HMAC will be 'closed' at
// the end of the block, as per
// MD5/SHA-1/SHA-2 specification
#define SHAMD5_MODE_ALGO_CONSTANT \
0x00000008 // The initial digest register will
// be overwritten with the
// algorithm constants for the
// selected algorithm when hashing
// and the initial digest count
// register will be reset to 0
#define SHAMD5_MODE_ALGO_M 0x00000007 // Hash Algorithm
#define SHAMD5_MODE_ALGO_MD5 0x00000000 // MD5
#define SHAMD5_MODE_ALGO_SHA1 0x00000002 // SHA-1
#define SHAMD5_MODE_ALGO_SHA224 0x00000004 // SHA-224
#define SHAMD5_MODE_ALGO_SHA256 0x00000006 // SHA-256
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_LENGTH
// register.
//
//*****************************************************************************
#define SHAMD5_LENGTH_M 0xFFFFFFFF // Block Length/Remaining Byte
// Count
#define SHAMD5_LENGTH_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_DATA_0_IN
// register.
//
//*****************************************************************************
#define SHAMD5_DATA_0_IN_DATA_M 0xFFFFFFFF // Digest/Key Data
#define SHAMD5_DATA_0_IN_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_DATA_1_IN
// register.
//
//*****************************************************************************
#define SHAMD5_DATA_1_IN_DATA_M 0xFFFFFFFF // Digest/Key Data
#define SHAMD5_DATA_1_IN_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_DATA_2_IN
// register.
//
//*****************************************************************************
#define SHAMD5_DATA_2_IN_DATA_M 0xFFFFFFFF // Digest/Key Data
#define SHAMD5_DATA_2_IN_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_DATA_3_IN
// register.
//
//*****************************************************************************
#define SHAMD5_DATA_3_IN_DATA_M 0xFFFFFFFF // Digest/Key Data
#define SHAMD5_DATA_3_IN_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_DATA_4_IN
// register.
//
//*****************************************************************************
#define SHAMD5_DATA_4_IN_DATA_M 0xFFFFFFFF // Digest/Key Data
#define SHAMD5_DATA_4_IN_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_DATA_5_IN
// register.
//
//*****************************************************************************
#define SHAMD5_DATA_5_IN_DATA_M 0xFFFFFFFF // Digest/Key Data
#define SHAMD5_DATA_5_IN_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_DATA_6_IN
// register.
//
//*****************************************************************************
#define SHAMD5_DATA_6_IN_DATA_M 0xFFFFFFFF // Digest/Key Data
#define SHAMD5_DATA_6_IN_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_DATA_7_IN
// register.
//
//*****************************************************************************
#define SHAMD5_DATA_7_IN_DATA_M 0xFFFFFFFF // Digest/Key Data
#define SHAMD5_DATA_7_IN_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_DATA_8_IN
// register.
//
//*****************************************************************************
#define SHAMD5_DATA_8_IN_DATA_M 0xFFFFFFFF // Digest/Key Data
#define SHAMD5_DATA_8_IN_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_DATA_9_IN
// register.
//
//*****************************************************************************
#define SHAMD5_DATA_9_IN_DATA_M 0xFFFFFFFF // Digest/Key Data
#define SHAMD5_DATA_9_IN_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_DATA_10_IN
// register.
//
//*****************************************************************************
#define SHAMD5_DATA_10_IN_DATA_M \
0xFFFFFFFF // Digest/Key Data
#define SHAMD5_DATA_10_IN_DATA_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_DATA_11_IN
// register.
//
//*****************************************************************************
#define SHAMD5_DATA_11_IN_DATA_M \
0xFFFFFFFF // Digest/Key Data
#define SHAMD5_DATA_11_IN_DATA_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_DATA_12_IN
// register.
//
//*****************************************************************************
#define SHAMD5_DATA_12_IN_DATA_M \
0xFFFFFFFF // Digest/Key Data
#define SHAMD5_DATA_12_IN_DATA_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_DATA_13_IN
// register.
//
//*****************************************************************************
#define SHAMD5_DATA_13_IN_DATA_M \
0xFFFFFFFF // Digest/Key Data
#define SHAMD5_DATA_13_IN_DATA_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_DATA_14_IN
// register.
//
//*****************************************************************************
#define SHAMD5_DATA_14_IN_DATA_M \
0xFFFFFFFF // Digest/Key Data
#define SHAMD5_DATA_14_IN_DATA_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_DATA_15_IN
// register.
//
//*****************************************************************************
#define SHAMD5_DATA_15_IN_DATA_M \
0xFFFFFFFF // Digest/Key Data
#define SHAMD5_DATA_15_IN_DATA_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_REVISION
// register.
//
//*****************************************************************************
#define SHAMD5_REVISION_M 0xFFFFFFFF // Revision Number
#define SHAMD5_REVISION_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_SYSCONFIG
// register.
//
//*****************************************************************************
#define SHAMD5_SYSCONFIG_SADVANCED \
0x00000080 // Advanced Mode Enable
#define SHAMD5_SYSCONFIG_SIDLE_M \
0x00000030 // Sidle mode
#define SHAMD5_SYSCONFIG_SIDLE_FORCE \
0x00000000 // Force-idle mode
#define SHAMD5_SYSCONFIG_DMA_EN 0x00000008 // uDMA Request Enable
#define SHAMD5_SYSCONFIG_IT_EN 0x00000004 // Interrupt Enable
#define SHAMD5_SYSCONFIG_SOFTRESET \
0x00000002 // Soft reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_SYSSTATUS
// register.
//
//*****************************************************************************
#define SHAMD5_SYSSTATUS_RESETDONE \
0x00000001 // Reset done status
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_IRQSTATUS
// register.
//
//*****************************************************************************
#define SHAMD5_IRQSTATUS_CONTEXT_READY \
0x00000008 // Context Ready Status
#define SHAMD5_IRQSTATUS_INPUT_READY \
0x00000002 // Input Ready Status
#define SHAMD5_IRQSTATUS_OUTPUT_READY \
0x00000001 // Output Ready Status
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_IRQENABLE
// register.
//
//*****************************************************************************
#define SHAMD5_IRQENABLE_CONTEXT_READY \
0x00000008 // Mask for context ready interrupt
#define SHAMD5_IRQENABLE_INPUT_READY \
0x00000002 // Mask for input ready interrupt
#define SHAMD5_IRQENABLE_OUTPUT_READY \
0x00000001 // Mask for output ready interrupt
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_DMAIM register.
//
//*****************************************************************************
#define SHAMD5_DMAIM_COUT 0x00000004 // Context Out DMA Done Interrupt
// Mask
#define SHAMD5_DMAIM_DIN 0x00000002 // Data In DMA Done Interrupt Mask
#define SHAMD5_DMAIM_CIN 0x00000001 // Context In DMA Done Interrupt
// Mask
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_DMARIS
// register.
//
//*****************************************************************************
#define SHAMD5_DMARIS_COUT 0x00000004 // Context Out DMA Done Raw
// Interrupt Status
#define SHAMD5_DMARIS_DIN 0x00000002 // Data In DMA Done Raw Interrupt
// Status
#define SHAMD5_DMARIS_CIN 0x00000001 // Context In DMA Done Raw
// Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_DMAMIS
// register.
//
//*****************************************************************************
#define SHAMD5_DMAMIS_COUT 0x00000004 // Context Out DMA Done Masked
// Interrupt Status
#define SHAMD5_DMAMIS_DIN 0x00000002 // Data In DMA Done Masked
// Interrupt Status
#define SHAMD5_DMAMIS_CIN 0x00000001 // Context In DMA Done Raw
// Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the SHAMD5_O_DMAIC register.
//
//*****************************************************************************
#define SHAMD5_DMAIC_COUT 0x00000004 // Context Out DMA Done Masked
// Interrupt Status
#define SHAMD5_DMAIC_DIN 0x00000002 // Data In DMA Done Interrupt Clear
#define SHAMD5_DMAIC_CIN 0x00000001 // Context In DMA Done Raw
// Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_KEY2_6 register.
//
//*****************************************************************************
#define AES_KEY2_6_KEY_M 0xFFFFFFFF // Key Data
#define AES_KEY2_6_KEY_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_KEY2_7 register.
//
//*****************************************************************************
#define AES_KEY2_7_KEY_M 0xFFFFFFFF // Key Data
#define AES_KEY2_7_KEY_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_KEY2_4 register.
//
//*****************************************************************************
#define AES_KEY2_4_KEY_M 0xFFFFFFFF // Key Data
#define AES_KEY2_4_KEY_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_KEY2_5 register.
//
//*****************************************************************************
#define AES_KEY2_5_KEY_M 0xFFFFFFFF // Key Data
#define AES_KEY2_5_KEY_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_KEY2_2 register.
//
//*****************************************************************************
#define AES_KEY2_2_KEY_M 0xFFFFFFFF // Key Data
#define AES_KEY2_2_KEY_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_KEY2_3 register.
//
//*****************************************************************************
#define AES_KEY2_3_KEY_M 0xFFFFFFFF // Key Data
#define AES_KEY2_3_KEY_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_KEY2_0 register.
//
//*****************************************************************************
#define AES_KEY2_0_KEY_M 0xFFFFFFFF // Key Data
#define AES_KEY2_0_KEY_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_KEY2_1 register.
//
//*****************************************************************************
#define AES_KEY2_1_KEY_M 0xFFFFFFFF // Key Data
#define AES_KEY2_1_KEY_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_KEY1_6 register.
//
//*****************************************************************************
#define AES_KEY1_6_KEY_M 0xFFFFFFFF // Key Data
#define AES_KEY1_6_KEY_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_KEY1_7 register.
//
//*****************************************************************************
#define AES_KEY1_7_KEY_M 0xFFFFFFFF // Key Data
#define AES_KEY1_7_KEY_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_KEY1_4 register.
//
//*****************************************************************************
#define AES_KEY1_4_KEY_M 0xFFFFFFFF // Key Data
#define AES_KEY1_4_KEY_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_KEY1_5 register.
//
//*****************************************************************************
#define AES_KEY1_5_KEY_M 0xFFFFFFFF // Key Data
#define AES_KEY1_5_KEY_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_KEY1_2 register.
//
//*****************************************************************************
#define AES_KEY1_2_KEY_M 0xFFFFFFFF // Key Data
#define AES_KEY1_2_KEY_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_KEY1_3 register.
//
//*****************************************************************************
#define AES_KEY1_3_KEY_M 0xFFFFFFFF // Key Data
#define AES_KEY1_3_KEY_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_KEY1_0 register.
//
//*****************************************************************************
#define AES_KEY1_0_KEY_M 0xFFFFFFFF // Key Data
#define AES_KEY1_0_KEY_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_KEY1_1 register.
//
//*****************************************************************************
#define AES_KEY1_1_KEY_M 0xFFFFFFFF // Key Data
#define AES_KEY1_1_KEY_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_IV_IN_0 register.
//
//*****************************************************************************
#define AES_IV_IN_0_DATA_M 0xFFFFFFFF // Initialization Vector Input
#define AES_IV_IN_0_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_IV_IN_1 register.
//
//*****************************************************************************
#define AES_IV_IN_1_DATA_M 0xFFFFFFFF // Initialization Vector Input
#define AES_IV_IN_1_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_IV_IN_2 register.
//
//*****************************************************************************
#define AES_IV_IN_2_DATA_M 0xFFFFFFFF // Initialization Vector Input
#define AES_IV_IN_2_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_IV_IN_3 register.
//
//*****************************************************************************
#define AES_IV_IN_3_DATA_M 0xFFFFFFFF // Initialization Vector Input
#define AES_IV_IN_3_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_CTRL register.
//
//*****************************************************************************
#define AES_CTRL_CTXTRDY 0x80000000 // Context Data Registers Ready
#define AES_CTRL_SVCTXTRDY 0x40000000 // AES TAG/IV Block(s) Ready
#define AES_CTRL_SAVE_CONTEXT 0x20000000 // TAG or Result IV Save
#define AES_CTRL_CCM_M_M 0x01C00000 // Counter with CBC-MAC (CCM)
#define AES_CTRL_CCM_L_M 0x00380000 // L Value
#define AES_CTRL_CCM_L_2 0x00080000 // width = 2
#define AES_CTRL_CCM_L_4 0x00180000 // width = 4
#define AES_CTRL_CCM_L_8 0x00380000 // width = 8
#define AES_CTRL_CCM 0x00040000 // AES-CCM Mode Enable
#define AES_CTRL_GCM_M 0x00030000 // AES-GCM Mode Enable
#define AES_CTRL_GCM_NOP 0x00000000 // No operation
#define AES_CTRL_GCM_HLY0ZERO 0x00010000 // GHASH with H loaded and
// Y0-encrypted forced to zero
#define AES_CTRL_GCM_HLY0CALC 0x00020000 // GHASH with H loaded and
// Y0-encrypted calculated
// internally
#define AES_CTRL_GCM_HY0CALC 0x00030000 // Autonomous GHASH (both H and
// Y0-encrypted calculated
// internally)
#define AES_CTRL_CBCMAC 0x00008000 // AES-CBC MAC Enable
#define AES_CTRL_F9 0x00004000 // AES f9 Mode Enable
#define AES_CTRL_F8 0x00002000 // AES f8 Mode Enable
#define AES_CTRL_XTS_M 0x00001800 // AES-XTS Operation Enabled
#define AES_CTRL_XTS_NOP 0x00000000 // No operation
#define AES_CTRL_XTS_TWEAKJL 0x00000800 // Previous/intermediate tweak
// value and j loaded (value is
// loaded via IV, j is loaded via
// the AAD length register)
#define AES_CTRL_XTS_K2IJL 0x00001000 // Key2, n and j are loaded (n is
// loaded via IV, j is loaded via
// the AAD length register)
#define AES_CTRL_XTS_K2ILJ0 0x00001800 // Key2 and n are loaded; j=0 (n is
// loaded via IV)
#define AES_CTRL_CFB 0x00000400 // Full block AES cipher feedback
// mode (CFB128) Enable
#define AES_CTRL_ICM 0x00000200 // AES Integer Counter Mode (ICM)
// Enable
#define AES_CTRL_CTR_WIDTH_M 0x00000180 // AES-CTR Mode Counter Width
#define AES_CTRL_CTR_WIDTH_32 0x00000000 // Counter is 32 bits
#define AES_CTRL_CTR_WIDTH_64 0x00000080 // Counter is 64 bits
#define AES_CTRL_CTR_WIDTH_96 0x00000100 // Counter is 96 bits
#define AES_CTRL_CTR_WIDTH_128 0x00000180 // Counter is 128 bits
#define AES_CTRL_CTR 0x00000040 // Counter Mode
#define AES_CTRL_MODE 0x00000020 // ECB/CBC Mode
#define AES_CTRL_KEY_SIZE_M 0x00000018 // Key Size
#define AES_CTRL_KEY_SIZE_128 0x00000008 // Key is 128 bits
#define AES_CTRL_KEY_SIZE_192 0x00000010 // Key is 192 bits
#define AES_CTRL_KEY_SIZE_256 0x00000018 // Key is 256 bits
#define AES_CTRL_DIRECTION 0x00000004 // Encryption/Decryption Selection
#define AES_CTRL_INPUT_READY 0x00000002 // Input Ready Status
#define AES_CTRL_OUTPUT_READY 0x00000001 // Output Ready Status
#define AES_CTRL_CCM_M_S 22
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_C_LENGTH_0
// register.
//
//*****************************************************************************
#define AES_C_LENGTH_0_LENGTH_M 0xFFFFFFFF // Data Length
#define AES_C_LENGTH_0_LENGTH_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_C_LENGTH_1
// register.
//
//*****************************************************************************
#define AES_C_LENGTH_1_LENGTH_M 0xFFFFFFFF // Data Length
#define AES_C_LENGTH_1_LENGTH_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_AUTH_LENGTH
// register.
//
//*****************************************************************************
#define AES_AUTH_LENGTH_AUTH_M 0xFFFFFFFF // Authentication Data Length
#define AES_AUTH_LENGTH_AUTH_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_DATA_IN_0
// register.
//
//*****************************************************************************
#define AES_DATA_IN_0_DATA_M 0xFFFFFFFF // Secure Data RW
// Plaintext/Ciphertext
#define AES_DATA_IN_0_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_DATA_IN_1
// register.
//
//*****************************************************************************
#define AES_DATA_IN_1_DATA_M 0xFFFFFFFF // Secure Data RW
// Plaintext/Ciphertext
#define AES_DATA_IN_1_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_DATA_IN_2
// register.
//
//*****************************************************************************
#define AES_DATA_IN_2_DATA_M 0xFFFFFFFF // Secure Data RW
// Plaintext/Ciphertext
#define AES_DATA_IN_2_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_DATA_IN_3
// register.
//
//*****************************************************************************
#define AES_DATA_IN_3_DATA_M 0xFFFFFFFF // Secure Data RW
// Plaintext/Ciphertext
#define AES_DATA_IN_3_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_TAG_OUT_0
// register.
//
//*****************************************************************************
#define AES_TAG_OUT_0_HASH_M 0xFFFFFFFF // Hash Result
#define AES_TAG_OUT_0_HASH_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_TAG_OUT_1
// register.
//
//*****************************************************************************
#define AES_TAG_OUT_1_HASH_M 0xFFFFFFFF // Hash Result
#define AES_TAG_OUT_1_HASH_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_TAG_OUT_2
// register.
//
//*****************************************************************************
#define AES_TAG_OUT_2_HASH_M 0xFFFFFFFF // Hash Result
#define AES_TAG_OUT_2_HASH_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_TAG_OUT_3
// register.
//
//*****************************************************************************
#define AES_TAG_OUT_3_HASH_M 0xFFFFFFFF // Hash Result
#define AES_TAG_OUT_3_HASH_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_REVISION register.
//
//*****************************************************************************
#define AES_REVISION_M 0xFFFFFFFF // Revision number
#define AES_REVISION_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_SYSCONFIG
// register.
//
//*****************************************************************************
#define AES_SYSCONFIG_K3 0x00001000 // K3 Select
#define AES_SYSCONFIG_KEYENC 0x00000800 // Key Encoding
#define AES_SYSCONFIG_MAP_CONTEXT_OUT_ON_DATA_OUT \
0x00000200 // Map Context Out on Data Out
// Enable
#define AES_SYSCONFIG_DMA_REQ_CONTEXT_OUT_EN \
0x00000100 // DMA Request Context Out Enable
#define AES_SYSCONFIG_DMA_REQ_CONTEXT_IN_EN \
0x00000080 // DMA Request Context In Enable
#define AES_SYSCONFIG_DMA_REQ_DATA_OUT_EN \
0x00000040 // DMA Request Data Out Enable
#define AES_SYSCONFIG_DMA_REQ_DATA_IN_EN \
0x00000020 // DMA Request Data In Enable
#define AES_SYSCONFIG_SOFTRESET 0x00000002 // Soft reset
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_SYSSTATUS
// register.
//
//*****************************************************************************
#define AES_SYSSTATUS_RESETDONE 0x00000001 // Reset Done
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_IRQSTATUS
// register.
//
//*****************************************************************************
#define AES_IRQSTATUS_CONTEXT_OUT \
0x00000008 // Context Output Interrupt Status
#define AES_IRQSTATUS_DATA_OUT 0x00000004 // Data Out Interrupt Status
#define AES_IRQSTATUS_DATA_IN 0x00000002 // Data In Interrupt Status
#define AES_IRQSTATUS_CONTEXT_IN \
0x00000001 // Context In Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_IRQENABLE
// register.
//
//*****************************************************************************
#define AES_IRQENABLE_CONTEXT_OUT \
0x00000008 // Context Out Interrupt Enable
#define AES_IRQENABLE_DATA_OUT 0x00000004 // Data Out Interrupt Enable
#define AES_IRQENABLE_DATA_IN 0x00000002 // Data In Interrupt Enable
#define AES_IRQENABLE_CONTEXT_IN \
0x00000001 // Context In Interrupt Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_DIRTYBITS
// register.
//
//*****************************************************************************
#define AES_DIRTYBITS_S_DIRTY 0x00000002 // AES Dirty Bit
#define AES_DIRTYBITS_S_ACCESS 0x00000001 // AES Access Bit
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_DMAIM register.
//
//*****************************************************************************
#define AES_DMAIM_DOUT 0x00000008 // Data Out DMA Done Interrupt Mask
#define AES_DMAIM_DIN 0x00000004 // Data In DMA Done Interrupt Mask
#define AES_DMAIM_COUT 0x00000002 // Context Out DMA Done Interrupt
// Mask
#define AES_DMAIM_CIN 0x00000001 // Context In DMA Done Interrupt
// Mask
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_DMARIS register.
//
//*****************************************************************************
#define AES_DMARIS_DOUT 0x00000008 // Data Out DMA Done Raw Interrupt
// Status
#define AES_DMARIS_DIN 0x00000004 // Data In DMA Done Raw Interrupt
// Status
#define AES_DMARIS_COUT 0x00000002 // Context Out DMA Done Raw
// Interrupt Status
#define AES_DMARIS_CIN 0x00000001 // Context In DMA Done Raw
// Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_DMAMIS register.
//
//*****************************************************************************
#define AES_DMAMIS_DOUT 0x00000008 // Data Out DMA Done Masked
// Interrupt Status
#define AES_DMAMIS_DIN 0x00000004 // Data In DMA Done Masked
// Interrupt Status
#define AES_DMAMIS_COUT 0x00000002 // Context Out DMA Done Masked
// Interrupt Status
#define AES_DMAMIS_CIN 0x00000001 // Context In DMA Done Raw
// Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the AES_O_DMAIC register.
//
//*****************************************************************************
#define AES_DMAIC_DOUT 0x00000008 // Data Out DMA Done Interrupt
// Clear
#define AES_DMAIC_DIN 0x00000004 // Data In DMA Done Interrupt Clear
#define AES_DMAIC_COUT 0x00000002 // Context Out DMA Done Masked
// Interrupt Status
#define AES_DMAIC_CIN 0x00000001 // Context In DMA Done Raw
// Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the DES_O_KEY3_L register.
//
//*****************************************************************************
#define DES_KEY3_L_KEY_M 0xFFFFFFFF // Key Data
#define DES_KEY3_L_KEY_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the DES_O_KEY3_H register.
//
//*****************************************************************************
#define DES_KEY3_H_KEY_M 0xFFFFFFFF // Key Data
#define DES_KEY3_H_KEY_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the DES_O_KEY2_L register.
//
//*****************************************************************************
#define DES_KEY2_L_KEY_M 0xFFFFFFFF // Key Data
#define DES_KEY2_L_KEY_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the DES_O_KEY2_H register.
//
//*****************************************************************************
#define DES_KEY2_H_KEY_M 0xFFFFFFFF // Key Data
#define DES_KEY2_H_KEY_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the DES_O_KEY1_L register.
//
//*****************************************************************************
#define DES_KEY1_L_KEY_M 0xFFFFFFFF // Key Data
#define DES_KEY1_L_KEY_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the DES_O_KEY1_H register.
//
//*****************************************************************************
#define DES_KEY1_H_KEY_M 0xFFFFFFFF // Key Data
#define DES_KEY1_H_KEY_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the DES_O_IV_L register.
//
//*****************************************************************************
#define DES_IV_L_M 0xFFFFFFFF // Initialization vector for CBC,
// CFB modes (LSW)
#define DES_IV_L_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the DES_O_IV_H register.
//
//*****************************************************************************
#define DES_IV_H_M 0xFFFFFFFF // Initialization vector for CBC,
// CFB modes (MSW)
#define DES_IV_H_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the DES_O_CTRL register.
//
//*****************************************************************************
#define DES_CTRL_CONTEXT 0x80000000 // If 1, this read-only status bit
// indicates that the context data
// registers can be overwritten and
// the host is permitted to write
// the next context
#define DES_CTRL_MODE_M 0x00000030 // Select CBC, ECB or CFB mode0x0:
// ECB mode0x1: CBC mode0x2: CFB
// mode0x3: reserved
#define DES_CTRL_TDES 0x00000008 // Select DES or triple DES
// encryption/decryption
#define DES_CTRL_DIRECTION 0x00000004 // Select encryption/decryption
// 0x0: decryption is selected0x1:
// Encryption is selected
#define DES_CTRL_INPUT_READY 0x00000002 // When 1, ready to encrypt/decrypt
// data
#define DES_CTRL_OUTPUT_READY 0x00000001 // When 1, Data decrypted/encrypted
// ready
#define DES_CTRL_MODE_S 4
//*****************************************************************************
//
// The following are defines for the bit fields in the DES_O_LENGTH register.
//
//*****************************************************************************
#define DES_LENGTH_M 0xFFFFFFFF // Cryptographic data length in
// bytes for all modes
#define DES_LENGTH_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the DES_O_DATA_L register.
//
//*****************************************************************************
#define DES_DATA_L_M 0xFFFFFFFF // Data for encryption/decryption,
// LSW
#define DES_DATA_L_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the DES_O_DATA_H register.
//
//*****************************************************************************
#define DES_DATA_H_M 0xFFFFFFFF // Data for encryption/decryption,
// MSW
#define DES_DATA_H_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the DES_O_REVISION register.
//
//*****************************************************************************
#define DES_REVISION_M 0xFFFFFFFF // Revision number
#define DES_REVISION_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the DES_O_SYSCONFIG
// register.
//
//*****************************************************************************
#define DES_SYSCONFIG_DMA_REQ_CONTEXT_IN_EN \
0x00000080 // DMA Request Context In Enable
#define DES_SYSCONFIG_DMA_REQ_DATA_OUT_EN \
0x00000040 // DMA Request Data Out Enable
#define DES_SYSCONFIG_DMA_REQ_DATA_IN_EN \
0x00000020 // DMA Request Data In Enable
#define DES_SYSCONFIG_SIDLE_M 0x0000000C // Sidle mode
#define DES_SYSCONFIG_SIDLE_FORCE \
0x00000000 // Force-idle mode
#define DES_SYSCONFIG_SOFTRESET 0x00000002 // Soft reset
//*****************************************************************************
//
// The following are defines for the bit fields in the DES_O_SYSSTATUS
// register.
//
//*****************************************************************************
#define DES_SYSSTATUS_RESETDONE 0x00000001 // Reset Done
//*****************************************************************************
//
// The following are defines for the bit fields in the DES_O_IRQSTATUS
// register.
//
//*****************************************************************************
#define DES_IRQSTATUS_DATA_OUT 0x00000004 // This bit indicates data output
// interrupt is active and triggers
// the interrupt output
#define DES_IRQSTATUS_DATA_IN 0x00000002 // This bit indicates data input
// interrupt is active and triggers
// the interrupt output
#define DES_IRQSTATUS_CONTEX_IN 0x00000001 // This bit indicates context
// interrupt is active and triggers
// the interrupt output
//*****************************************************************************
//
// The following are defines for the bit fields in the DES_O_IRQENABLE
// register.
//
//*****************************************************************************
#define DES_IRQENABLE_M_DATA_OUT \
0x00000004 // If this bit is set to 1 the data
// output interrupt is enabled
#define DES_IRQENABLE_M_DATA_IN 0x00000002 // If this bit is set to 1 the data
// input interrupt is enabled
#define DES_IRQENABLE_M_CONTEX_IN \
0x00000001 // If this bit is set to 1 the
// context interrupt is enabled
//*****************************************************************************
//
// The following are defines for the bit fields in the DES_O_DIRTYBITS
// register.
//
//*****************************************************************************
#define DES_DIRTYBITS_S_DIRTY 0x00000002 // This bit is set to 1 by the
// module if any of the DES_*
// registers is written
#define DES_DIRTYBITS_S_ACCESS 0x00000001 // This bit is set to 1 by the
// module if any of the DES_*
// registers is read
//*****************************************************************************
//
// The following are defines for the bit fields in the DES_O_DMAIM register.
//
//*****************************************************************************
#define DES_DMAIM_DOUT 0x00000004 // Data Out DMA Done Interrupt Mask
#define DES_DMAIM_DIN 0x00000002 // Data In DMA Done Interrupt Mask
#define DES_DMAIM_CIN 0x00000001 // Context In DMA Done Interrupt
// Mask
//*****************************************************************************
//
// The following are defines for the bit fields in the DES_O_DMARIS register.
//
//*****************************************************************************
#define DES_DMARIS_DOUT 0x00000004 // Data Out DMA Done Raw Interrupt
// Status
#define DES_DMARIS_DIN 0x00000002 // Data In DMA Done Raw Interrupt
// Status
#define DES_DMARIS_CIN 0x00000001 // Context In DMA Done Raw
// Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the DES_O_DMAMIS register.
//
//*****************************************************************************
#define DES_DMAMIS_DOUT 0x00000004 // Data Out DMA Done Masked
// Interrupt Status
#define DES_DMAMIS_DIN 0x00000002 // Data In DMA Done Masked
// Interrupt Status
#define DES_DMAMIS_CIN 0x00000001 // Context In DMA Done Raw
// Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the DES_O_DMAIC register.
//
//*****************************************************************************
#define DES_DMAIC_DOUT 0x00000004 // Data Out DMA Done Interrupt
// Clear
#define DES_DMAIC_DIN 0x00000002 // Data In DMA Done Interrupt Clear
#define DES_DMAIC_CIN 0x00000001 // Context In DMA Done Raw
// Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_ACTLR register.
//
//*****************************************************************************
#define NVIC_ACTLR_DISOOFP 0x00000200 // Disable Out-Of-Order Floating
// Point
#define NVIC_ACTLR_DISFPCA 0x00000100 // Disable CONTROL
#define NVIC_ACTLR_DISFOLD 0x00000004 // Disable IT Folding
#define NVIC_ACTLR_DISWBUF 0x00000002 // Disable Write Buffer
#define NVIC_ACTLR_DISMCYC 0x00000001 // Disable Interrupts of Multiple
// Cycle Instructions
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_ST_CTRL register.
//
//*****************************************************************************
#define NVIC_ST_CTRL_COUNT 0x00010000 // Count Flag
#define NVIC_ST_CTRL_CLK_SRC 0x00000004 // Clock Source
#define NVIC_ST_CTRL_INTEN 0x00000002 // Interrupt Enable
#define NVIC_ST_CTRL_ENABLE 0x00000001 // Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_ST_RELOAD register.
//
//*****************************************************************************
#define NVIC_ST_RELOAD_M 0x00FFFFFF // Reload Value
#define NVIC_ST_RELOAD_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_ST_CURRENT
// register.
//
//*****************************************************************************
#define NVIC_ST_CURRENT_M 0x00FFFFFF // Current Value
#define NVIC_ST_CURRENT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_EN0 register.
//
//*****************************************************************************
#define NVIC_EN0_INT_M 0xFFFFFFFF // Interrupt Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_EN1 register.
//
//*****************************************************************************
#define NVIC_EN1_INT_M 0xFFFFFFFF // Interrupt Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_EN2 register.
//
//*****************************************************************************
#define NVIC_EN2_INT_M 0xFFFFFFFF // Interrupt Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_EN3 register.
//
//*****************************************************************************
#define NVIC_EN3_INT_M 0xFFFFFFFF // Interrupt Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_DIS0 register.
//
//*****************************************************************************
#define NVIC_DIS0_INT_M 0xFFFFFFFF // Interrupt Disable
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_DIS1 register.
//
//*****************************************************************************
#define NVIC_DIS1_INT_M 0xFFFFFFFF // Interrupt Disable
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_DIS2 register.
//
//*****************************************************************************
#define NVIC_DIS2_INT_M 0xFFFFFFFF // Interrupt Disable
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_DIS3 register.
//
//*****************************************************************************
#define NVIC_DIS3_INT_M 0xFFFFFFFF // Interrupt Disable
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PEND0 register.
//
//*****************************************************************************
#define NVIC_PEND0_INT_M 0xFFFFFFFF // Interrupt Set Pending
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PEND1 register.
//
//*****************************************************************************
#define NVIC_PEND1_INT_M 0xFFFFFFFF // Interrupt Set Pending
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PEND2 register.
//
//*****************************************************************************
#define NVIC_PEND2_INT_M 0xFFFFFFFF // Interrupt Set Pending
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PEND3 register.
//
//*****************************************************************************
#define NVIC_PEND3_INT_M 0xFFFFFFFF // Interrupt Set Pending
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_UNPEND0 register.
//
//*****************************************************************************
#define NVIC_UNPEND0_INT_M 0xFFFFFFFF // Interrupt Clear Pending
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_UNPEND1 register.
//
//*****************************************************************************
#define NVIC_UNPEND1_INT_M 0xFFFFFFFF // Interrupt Clear Pending
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_UNPEND2 register.
//
//*****************************************************************************
#define NVIC_UNPEND2_INT_M 0xFFFFFFFF // Interrupt Clear Pending
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_UNPEND3 register.
//
//*****************************************************************************
#define NVIC_UNPEND3_INT_M 0xFFFFFFFF // Interrupt Clear Pending
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_ACTIVE0 register.
//
//*****************************************************************************
#define NVIC_ACTIVE0_INT_M 0xFFFFFFFF // Interrupt Active
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_ACTIVE1 register.
//
//*****************************************************************************
#define NVIC_ACTIVE1_INT_M 0xFFFFFFFF // Interrupt Active
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_ACTIVE2 register.
//
//*****************************************************************************
#define NVIC_ACTIVE2_INT_M 0xFFFFFFFF // Interrupt Active
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_ACTIVE3 register.
//
//*****************************************************************************
#define NVIC_ACTIVE3_INT_M 0xFFFFFFFF // Interrupt Active
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI0 register.
//
//*****************************************************************************
#define NVIC_PRI0_INT3_M 0xE0000000 // Interrupt 3 Priority Mask
#define NVIC_PRI0_INT2_M 0x00E00000 // Interrupt 2 Priority Mask
#define NVIC_PRI0_INT1_M 0x0000E000 // Interrupt 1 Priority Mask
#define NVIC_PRI0_INT0_M 0x000000E0 // Interrupt 0 Priority Mask
#define NVIC_PRI0_INT3_S 29
#define NVIC_PRI0_INT2_S 21
#define NVIC_PRI0_INT1_S 13
#define NVIC_PRI0_INT0_S 5
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI1 register.
//
//*****************************************************************************
#define NVIC_PRI1_INT7_M 0xE0000000 // Interrupt 7 Priority Mask
#define NVIC_PRI1_INT6_M 0x00E00000 // Interrupt 6 Priority Mask
#define NVIC_PRI1_INT5_M 0x0000E000 // Interrupt 5 Priority Mask
#define NVIC_PRI1_INT4_M 0x000000E0 // Interrupt 4 Priority Mask
#define NVIC_PRI1_INT7_S 29
#define NVIC_PRI1_INT6_S 21
#define NVIC_PRI1_INT5_S 13
#define NVIC_PRI1_INT4_S 5
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI2 register.
//
//*****************************************************************************
#define NVIC_PRI2_INT11_M 0xE0000000 // Interrupt 11 Priority Mask
#define NVIC_PRI2_INT10_M 0x00E00000 // Interrupt 10 Priority Mask
#define NVIC_PRI2_INT9_M 0x0000E000 // Interrupt 9 Priority Mask
#define NVIC_PRI2_INT8_M 0x000000E0 // Interrupt 8 Priority Mask
#define NVIC_PRI2_INT11_S 29
#define NVIC_PRI2_INT10_S 21
#define NVIC_PRI2_INT9_S 13
#define NVIC_PRI2_INT8_S 5
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI3 register.
//
//*****************************************************************************
#define NVIC_PRI3_INT15_M 0xE0000000 // Interrupt 15 Priority Mask
#define NVIC_PRI3_INT14_M 0x00E00000 // Interrupt 14 Priority Mask
#define NVIC_PRI3_INT13_M 0x0000E000 // Interrupt 13 Priority Mask
#define NVIC_PRI3_INT12_M 0x000000E0 // Interrupt 12 Priority Mask
#define NVIC_PRI3_INT15_S 29
#define NVIC_PRI3_INT14_S 21
#define NVIC_PRI3_INT13_S 13
#define NVIC_PRI3_INT12_S 5
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI4 register.
//
//*****************************************************************************
#define NVIC_PRI4_INT19_M 0xE0000000 // Interrupt 19 Priority Mask
#define NVIC_PRI4_INT18_M 0x00E00000 // Interrupt 18 Priority Mask
#define NVIC_PRI4_INT17_M 0x0000E000 // Interrupt 17 Priority Mask
#define NVIC_PRI4_INT16_M 0x000000E0 // Interrupt 16 Priority Mask
#define NVIC_PRI4_INT19_S 29
#define NVIC_PRI4_INT18_S 21
#define NVIC_PRI4_INT17_S 13
#define NVIC_PRI4_INT16_S 5
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI5 register.
//
//*****************************************************************************
#define NVIC_PRI5_INT23_M 0xE0000000 // Interrupt 23 Priority Mask
#define NVIC_PRI5_INT22_M 0x00E00000 // Interrupt 22 Priority Mask
#define NVIC_PRI5_INT21_M 0x0000E000 // Interrupt 21 Priority Mask
#define NVIC_PRI5_INT20_M 0x000000E0 // Interrupt 20 Priority Mask
#define NVIC_PRI5_INT23_S 29
#define NVIC_PRI5_INT22_S 21
#define NVIC_PRI5_INT21_S 13
#define NVIC_PRI5_INT20_S 5
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI6 register.
//
//*****************************************************************************
#define NVIC_PRI6_INT27_M 0xE0000000 // Interrupt 27 Priority Mask
#define NVIC_PRI6_INT26_M 0x00E00000 // Interrupt 26 Priority Mask
#define NVIC_PRI6_INT25_M 0x0000E000 // Interrupt 25 Priority Mask
#define NVIC_PRI6_INT24_M 0x000000E0 // Interrupt 24 Priority Mask
#define NVIC_PRI6_INT27_S 29
#define NVIC_PRI6_INT26_S 21
#define NVIC_PRI6_INT25_S 13
#define NVIC_PRI6_INT24_S 5
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI7 register.
//
//*****************************************************************************
#define NVIC_PRI7_INT31_M 0xE0000000 // Interrupt 31 Priority Mask
#define NVIC_PRI7_INT30_M 0x00E00000 // Interrupt 30 Priority Mask
#define NVIC_PRI7_INT29_M 0x0000E000 // Interrupt 29 Priority Mask
#define NVIC_PRI7_INT28_M 0x000000E0 // Interrupt 28 Priority Mask
#define NVIC_PRI7_INT31_S 29
#define NVIC_PRI7_INT30_S 21
#define NVIC_PRI7_INT29_S 13
#define NVIC_PRI7_INT28_S 5
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI8 register.
//
//*****************************************************************************
#define NVIC_PRI8_INT35_M 0xE0000000 // Interrupt 35 Priority Mask
#define NVIC_PRI8_INT34_M 0x00E00000 // Interrupt 34 Priority Mask
#define NVIC_PRI8_INT33_M 0x0000E000 // Interrupt 33 Priority Mask
#define NVIC_PRI8_INT32_M 0x000000E0 // Interrupt 32 Priority Mask
#define NVIC_PRI8_INT35_S 29
#define NVIC_PRI8_INT34_S 21
#define NVIC_PRI8_INT33_S 13
#define NVIC_PRI8_INT32_S 5
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI9 register.
//
//*****************************************************************************
#define NVIC_PRI9_INT39_M 0xE0000000 // Interrupt 39 Priority Mask
#define NVIC_PRI9_INT38_M 0x00E00000 // Interrupt 38 Priority Mask
#define NVIC_PRI9_INT37_M 0x0000E000 // Interrupt 37 Priority Mask
#define NVIC_PRI9_INT36_M 0x000000E0 // Interrupt 36 Priority Mask
#define NVIC_PRI9_INT39_S 29
#define NVIC_PRI9_INT38_S 21
#define NVIC_PRI9_INT37_S 13
#define NVIC_PRI9_INT36_S 5
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI10 register.
//
//*****************************************************************************
#define NVIC_PRI10_INT43_M 0xE0000000 // Interrupt 43 Priority Mask
#define NVIC_PRI10_INT42_M 0x00E00000 // Interrupt 42 Priority Mask
#define NVIC_PRI10_INT41_M 0x0000E000 // Interrupt 41 Priority Mask
#define NVIC_PRI10_INT40_M 0x000000E0 // Interrupt 40 Priority Mask
#define NVIC_PRI10_INT43_S 29
#define NVIC_PRI10_INT42_S 21
#define NVIC_PRI10_INT41_S 13
#define NVIC_PRI10_INT40_S 5
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI11 register.
//
//*****************************************************************************
#define NVIC_PRI11_INT47_M 0xE0000000 // Interrupt 47 Priority Mask
#define NVIC_PRI11_INT46_M 0x00E00000 // Interrupt 46 Priority Mask
#define NVIC_PRI11_INT45_M 0x0000E000 // Interrupt 45 Priority Mask
#define NVIC_PRI11_INT44_M 0x000000E0 // Interrupt 44 Priority Mask
#define NVIC_PRI11_INT47_S 29
#define NVIC_PRI11_INT46_S 21
#define NVIC_PRI11_INT45_S 13
#define NVIC_PRI11_INT44_S 5
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI12 register.
//
//*****************************************************************************
#define NVIC_PRI12_INT51_M 0xE0000000 // Interrupt 51 Priority Mask
#define NVIC_PRI12_INT50_M 0x00E00000 // Interrupt 50 Priority Mask
#define NVIC_PRI12_INT49_M 0x0000E000 // Interrupt 49 Priority Mask
#define NVIC_PRI12_INT48_M 0x000000E0 // Interrupt 48 Priority Mask
#define NVIC_PRI12_INT51_S 29
#define NVIC_PRI12_INT50_S 21
#define NVIC_PRI12_INT49_S 13
#define NVIC_PRI12_INT48_S 5
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI13 register.
//
//*****************************************************************************
#define NVIC_PRI13_INT55_M 0xE0000000 // Interrupt 55 Priority Mask
#define NVIC_PRI13_INT54_M 0x00E00000 // Interrupt 54 Priority Mask
#define NVIC_PRI13_INT53_M 0x0000E000 // Interrupt 53 Priority Mask
#define NVIC_PRI13_INT52_M 0x000000E0 // Interrupt 52 Priority Mask
#define NVIC_PRI13_INT55_S 29
#define NVIC_PRI13_INT54_S 21
#define NVIC_PRI13_INT53_S 13
#define NVIC_PRI13_INT52_S 5
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI14 register.
//
//*****************************************************************************
#define NVIC_PRI14_INTD_M 0xE0000000 // Interrupt 59 Priority Mask
#define NVIC_PRI14_INTC_M 0x00E00000 // Interrupt 58 Priority Mask
#define NVIC_PRI14_INTB_M 0x0000E000 // Interrupt 57 Priority Mask
#define NVIC_PRI14_INTA_M 0x000000E0 // Interrupt 56 Priority Mask
#define NVIC_PRI14_INTD_S 29
#define NVIC_PRI14_INTC_S 21
#define NVIC_PRI14_INTB_S 13
#define NVIC_PRI14_INTA_S 5
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI15 register.
//
//*****************************************************************************
#define NVIC_PRI15_INTD_M 0xE0000000 // Interrupt 63 Priority Mask
#define NVIC_PRI15_INTC_M 0x00E00000 // Interrupt 62 Priority Mask
#define NVIC_PRI15_INTB_M 0x0000E000 // Interrupt 61 Priority Mask
#define NVIC_PRI15_INTA_M 0x000000E0 // Interrupt 60 Priority Mask
#define NVIC_PRI15_INTD_S 29
#define NVIC_PRI15_INTC_S 21
#define NVIC_PRI15_INTB_S 13
#define NVIC_PRI15_INTA_S 5
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI16 register.
//
//*****************************************************************************
#define NVIC_PRI16_INTD_M 0xE0000000 // Interrupt 67 Priority Mask
#define NVIC_PRI16_INTC_M 0x00E00000 // Interrupt 66 Priority Mask
#define NVIC_PRI16_INTB_M 0x0000E000 // Interrupt 65 Priority Mask
#define NVIC_PRI16_INTA_M 0x000000E0 // Interrupt 64 Priority Mask
#define NVIC_PRI16_INTD_S 29
#define NVIC_PRI16_INTC_S 21
#define NVIC_PRI16_INTB_S 13
#define NVIC_PRI16_INTA_S 5
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI17 register.
//
//*****************************************************************************
#define NVIC_PRI17_INTD_M 0xE0000000 // Interrupt 71 Priority Mask
#define NVIC_PRI17_INTC_M 0x00E00000 // Interrupt 70 Priority Mask
#define NVIC_PRI17_INTB_M 0x0000E000 // Interrupt 69 Priority Mask
#define NVIC_PRI17_INTA_M 0x000000E0 // Interrupt 68 Priority Mask
#define NVIC_PRI17_INTD_S 29
#define NVIC_PRI17_INTC_S 21
#define NVIC_PRI17_INTB_S 13
#define NVIC_PRI17_INTA_S 5
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI18 register.
//
//*****************************************************************************
#define NVIC_PRI18_INTD_M 0xE0000000 // Interrupt 75 Priority Mask
#define NVIC_PRI18_INTC_M 0x00E00000 // Interrupt 74 Priority Mask
#define NVIC_PRI18_INTB_M 0x0000E000 // Interrupt 73 Priority Mask
#define NVIC_PRI18_INTA_M 0x000000E0 // Interrupt 72 Priority Mask
#define NVIC_PRI18_INTD_S 29
#define NVIC_PRI18_INTC_S 21
#define NVIC_PRI18_INTB_S 13
#define NVIC_PRI18_INTA_S 5
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI19 register.
//
//*****************************************************************************
#define NVIC_PRI19_INTD_M 0xE0000000 // Interrupt 79 Priority Mask
#define NVIC_PRI19_INTC_M 0x00E00000 // Interrupt 78 Priority Mask
#define NVIC_PRI19_INTB_M 0x0000E000 // Interrupt 77 Priority Mask
#define NVIC_PRI19_INTA_M 0x000000E0 // Interrupt 76 Priority Mask
#define NVIC_PRI19_INTD_S 29
#define NVIC_PRI19_INTC_S 21
#define NVIC_PRI19_INTB_S 13
#define NVIC_PRI19_INTA_S 5
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI20 register.
//
//*****************************************************************************
#define NVIC_PRI20_INTD_M 0xE0000000 // Interrupt 83 Priority Mask
#define NVIC_PRI20_INTC_M 0x00E00000 // Interrupt 82 Priority Mask
#define NVIC_PRI20_INTB_M 0x0000E000 // Interrupt 81 Priority Mask
#define NVIC_PRI20_INTA_M 0x000000E0 // Interrupt 80 Priority Mask
#define NVIC_PRI20_INTD_S 29
#define NVIC_PRI20_INTC_S 21
#define NVIC_PRI20_INTB_S 13
#define NVIC_PRI20_INTA_S 5
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI21 register.
//
//*****************************************************************************
#define NVIC_PRI21_INTD_M 0xE0000000 // Interrupt 87 Priority Mask
#define NVIC_PRI21_INTC_M 0x00E00000 // Interrupt 86 Priority Mask
#define NVIC_PRI21_INTB_M 0x0000E000 // Interrupt 85 Priority Mask
#define NVIC_PRI21_INTA_M 0x000000E0 // Interrupt 84 Priority Mask
#define NVIC_PRI21_INTD_S 29
#define NVIC_PRI21_INTC_S 21
#define NVIC_PRI21_INTB_S 13
#define NVIC_PRI21_INTA_S 5
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI22 register.
//
//*****************************************************************************
#define NVIC_PRI22_INTD_M 0xE0000000 // Interrupt 91 Priority Mask
#define NVIC_PRI22_INTC_M 0x00E00000 // Interrupt 90 Priority Mask
#define NVIC_PRI22_INTB_M 0x0000E000 // Interrupt 89 Priority Mask
#define NVIC_PRI22_INTA_M 0x000000E0 // Interrupt 88 Priority Mask
#define NVIC_PRI22_INTD_S 29
#define NVIC_PRI22_INTC_S 21
#define NVIC_PRI22_INTB_S 13
#define NVIC_PRI22_INTA_S 5
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI23 register.
//
//*****************************************************************************
#define NVIC_PRI23_INTD_M 0xE0000000 // Interrupt 95 Priority Mask
#define NVIC_PRI23_INTC_M 0x00E00000 // Interrupt 94 Priority Mask
#define NVIC_PRI23_INTB_M 0x0000E000 // Interrupt 93 Priority Mask
#define NVIC_PRI23_INTA_M 0x000000E0 // Interrupt 92 Priority Mask
#define NVIC_PRI23_INTD_S 29
#define NVIC_PRI23_INTC_S 21
#define NVIC_PRI23_INTB_S 13
#define NVIC_PRI23_INTA_S 5
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI24 register.
//
//*****************************************************************************
#define NVIC_PRI24_INTD_M 0xE0000000 // Interrupt 99 Priority Mask
#define NVIC_PRI24_INTC_M 0x00E00000 // Interrupt 98 Priority Mask
#define NVIC_PRI24_INTB_M 0x0000E000 // Interrupt 97 Priority Mask
#define NVIC_PRI24_INTA_M 0x000000E0 // Interrupt 96 Priority Mask
#define NVIC_PRI24_INTD_S 29
#define NVIC_PRI24_INTC_S 21
#define NVIC_PRI24_INTB_S 13
#define NVIC_PRI24_INTA_S 5
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI25 register.
//
//*****************************************************************************
#define NVIC_PRI25_INTD_M 0xE0000000 // Interrupt 103 Priority Mask
#define NVIC_PRI25_INTC_M 0x00E00000 // Interrupt 102 Priority Mask
#define NVIC_PRI25_INTB_M 0x0000E000 // Interrupt 101 Priority Mask
#define NVIC_PRI25_INTA_M 0x000000E0 // Interrupt 100 Priority Mask
#define NVIC_PRI25_INTD_S 29
#define NVIC_PRI25_INTC_S 21
#define NVIC_PRI25_INTB_S 13
#define NVIC_PRI25_INTA_S 5
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI26 register.
//
//*****************************************************************************
#define NVIC_PRI26_INTD_M 0xE0000000 // Interrupt 107 Priority Mask
#define NVIC_PRI26_INTC_M 0x00E00000 // Interrupt 106 Priority Mask
#define NVIC_PRI26_INTB_M 0x0000E000 // Interrupt 105 Priority Mask
#define NVIC_PRI26_INTA_M 0x000000E0 // Interrupt 104 Priority Mask
#define NVIC_PRI26_INTD_S 29
#define NVIC_PRI26_INTC_S 21
#define NVIC_PRI26_INTB_S 13
#define NVIC_PRI26_INTA_S 5
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI27 register.
//
//*****************************************************************************
#define NVIC_PRI27_INTD_M 0xE0000000 // Interrupt 111 Priority Mask
#define NVIC_PRI27_INTC_M 0x00E00000 // Interrupt 110 Priority Mask
#define NVIC_PRI27_INTB_M 0x0000E000 // Interrupt 109 Priority Mask
#define NVIC_PRI27_INTA_M 0x000000E0 // Interrupt 108 Priority Mask
#define NVIC_PRI27_INTD_S 29
#define NVIC_PRI27_INTC_S 21
#define NVIC_PRI27_INTB_S 13
#define NVIC_PRI27_INTA_S 5
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI28 register.
//
//*****************************************************************************
#define NVIC_PRI28_INTD_M 0xE0000000 // Interrupt 115 Priority Mask
#define NVIC_PRI28_INTC_M 0x00E00000 // Interrupt 114 Priority Mask
#define NVIC_PRI28_INTB_M 0x0000E000 // Interrupt 113 Priority Mask
#define NVIC_PRI28_INTA_M 0x000000E0 // Interrupt 112 Priority Mask
#define NVIC_PRI28_INTD_S 29
#define NVIC_PRI28_INTC_S 21
#define NVIC_PRI28_INTB_S 13
#define NVIC_PRI28_INTA_S 5
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_CPUID register.
//
//*****************************************************************************
#define NVIC_CPUID_IMP_M 0xFF000000 // Implementer Code
#define NVIC_CPUID_IMP_ARM 0x41000000 // ARM
#define NVIC_CPUID_VAR_M 0x00F00000 // Variant Number
#define NVIC_CPUID_CON_M 0x000F0000 // Constant
#define NVIC_CPUID_PARTNO_M 0x0000FFF0 // Part Number
#define NVIC_CPUID_PARTNO_CM4 0x0000C240 // Cortex-M4 processor
#define NVIC_CPUID_REV_M 0x0000000F // Revision Number
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_INT_CTRL register.
//
//*****************************************************************************
#define NVIC_INT_CTRL_NMI_SET 0x80000000 // NMI Set Pending
#define NVIC_INT_CTRL_PEND_SV 0x10000000 // PendSV Set Pending
#define NVIC_INT_CTRL_UNPEND_SV 0x08000000 // PendSV Clear Pending
#define NVIC_INT_CTRL_PENDSTSET 0x04000000 // SysTick Set Pending
#define NVIC_INT_CTRL_PENDSTCLR 0x02000000 // SysTick Clear Pending
#define NVIC_INT_CTRL_ISR_PRE 0x00800000 // Debug Interrupt Handling
#define NVIC_INT_CTRL_ISR_PEND 0x00400000 // Interrupt Pending
#define NVIC_INT_CTRL_VEC_PEN_M 0x000FF000 // Interrupt Pending Vector Number
#define NVIC_INT_CTRL_VEC_PEN_NMI \
0x00002000 // NMI
#define NVIC_INT_CTRL_VEC_PEN_HARD \
0x00003000 // Hard fault
#define NVIC_INT_CTRL_VEC_PEN_MEM \
0x00004000 // Memory management fault
#define NVIC_INT_CTRL_VEC_PEN_BUS \
0x00005000 // Bus fault
#define NVIC_INT_CTRL_VEC_PEN_USG \
0x00006000 // Usage fault
#define NVIC_INT_CTRL_VEC_PEN_SVC \
0x0000B000 // SVCall
#define NVIC_INT_CTRL_VEC_PEN_PNDSV \
0x0000E000 // PendSV
#define NVIC_INT_CTRL_VEC_PEN_TICK \
0x0000F000 // SysTick
#define NVIC_INT_CTRL_RET_BASE 0x00000800 // Return to Base
#define NVIC_INT_CTRL_VEC_ACT_M 0x000000FF // Interrupt Pending Vector Number
#define NVIC_INT_CTRL_VEC_ACT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_VTABLE register.
//
//*****************************************************************************
#define NVIC_VTABLE_OFFSET_M 0xFFFFFC00 // Vector Table Offset
#define NVIC_VTABLE_OFFSET_S 10
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_APINT register.
//
//*****************************************************************************
#define NVIC_APINT_VECTKEY_M 0xFFFF0000 // Register Key
#define NVIC_APINT_VECTKEY 0x05FA0000 // Vector key
#define NVIC_APINT_ENDIANESS 0x00008000 // Data Endianess
#define NVIC_APINT_PRIGROUP_M 0x00000700 // Interrupt Priority Grouping
#define NVIC_APINT_PRIGROUP_7_1 0x00000000 // Priority group 7.1 split
#define NVIC_APINT_PRIGROUP_6_2 0x00000100 // Priority group 6.2 split
#define NVIC_APINT_PRIGROUP_5_3 0x00000200 // Priority group 5.3 split
#define NVIC_APINT_PRIGROUP_4_4 0x00000300 // Priority group 4.4 split
#define NVIC_APINT_PRIGROUP_3_5 0x00000400 // Priority group 3.5 split
#define NVIC_APINT_PRIGROUP_2_6 0x00000500 // Priority group 2.6 split
#define NVIC_APINT_PRIGROUP_1_7 0x00000600 // Priority group 1.7 split
#define NVIC_APINT_PRIGROUP_0_8 0x00000700 // Priority group 0.8 split
#define NVIC_APINT_SYSRESETREQ 0x00000004 // System Reset Request
#define NVIC_APINT_VECT_CLR_ACT 0x00000002 // Clear Active NMI / Fault
#define NVIC_APINT_VECT_RESET 0x00000001 // System Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_SYS_CTRL register.
//
//*****************************************************************************
#define NVIC_SYS_CTRL_SEVONPEND 0x00000010 // Wake Up on Pending
#define NVIC_SYS_CTRL_SLEEPDEEP 0x00000004 // Deep Sleep Enable
#define NVIC_SYS_CTRL_SLEEPEXIT 0x00000002 // Sleep on ISR Exit
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_CFG_CTRL register.
//
//*****************************************************************************
#define NVIC_CFG_CTRL_STKALIGN 0x00000200 // Stack Alignment on Exception
// Entry
#define NVIC_CFG_CTRL_BFHFNMIGN 0x00000100 // Ignore Bus Fault in NMI and
// Fault
#define NVIC_CFG_CTRL_DIV0 0x00000010 // Trap on Divide by 0
#define NVIC_CFG_CTRL_UNALIGNED 0x00000008 // Trap on Unaligned Access
#define NVIC_CFG_CTRL_MAIN_PEND 0x00000002 // Allow Main Interrupt Trigger
#define NVIC_CFG_CTRL_BASE_THR 0x00000001 // Thread State Control
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_SYS_PRI1 register.
//
//*****************************************************************************
#define NVIC_SYS_PRI1_USAGE_M 0x00E00000 // Usage Fault Priority
#define NVIC_SYS_PRI1_BUS_M 0x0000E000 // Bus Fault Priority
#define NVIC_SYS_PRI1_MEM_M 0x000000E0 // Memory Management Fault Priority
#define NVIC_SYS_PRI1_USAGE_S 21
#define NVIC_SYS_PRI1_BUS_S 13
#define NVIC_SYS_PRI1_MEM_S 5
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_SYS_PRI2 register.
//
//*****************************************************************************
#define NVIC_SYS_PRI2_SVC_M 0xE0000000 // SVCall Priority
#define NVIC_SYS_PRI2_SVC_S 29
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_SYS_PRI3 register.
//
//*****************************************************************************
#define NVIC_SYS_PRI3_TICK_M 0xE0000000 // SysTick Exception Priority
#define NVIC_SYS_PRI3_PENDSV_M 0x00E00000 // PendSV Priority
#define NVIC_SYS_PRI3_DEBUG_M 0x000000E0 // Debug Priority
#define NVIC_SYS_PRI3_TICK_S 29
#define NVIC_SYS_PRI3_PENDSV_S 21
#define NVIC_SYS_PRI3_DEBUG_S 5
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_SYS_HND_CTRL
// register.
//
//*****************************************************************************
#define NVIC_SYS_HND_CTRL_USAGE 0x00040000 // Usage Fault Enable
#define NVIC_SYS_HND_CTRL_BUS 0x00020000 // Bus Fault Enable
#define NVIC_SYS_HND_CTRL_MEM 0x00010000 // Memory Management Fault Enable
#define NVIC_SYS_HND_CTRL_SVC 0x00008000 // SVC Call Pending
#define NVIC_SYS_HND_CTRL_BUSP 0x00004000 // Bus Fault Pending
#define NVIC_SYS_HND_CTRL_MEMP 0x00002000 // Memory Management Fault Pending
#define NVIC_SYS_HND_CTRL_USAGEP \
0x00001000 // Usage Fault Pending
#define NVIC_SYS_HND_CTRL_TICK 0x00000800 // SysTick Exception Active
#define NVIC_SYS_HND_CTRL_PNDSV 0x00000400 // PendSV Exception Active
#define NVIC_SYS_HND_CTRL_MON 0x00000100 // Debug Monitor Active
#define NVIC_SYS_HND_CTRL_SVCA 0x00000080 // SVC Call Active
#define NVIC_SYS_HND_CTRL_USGA 0x00000008 // Usage Fault Active
#define NVIC_SYS_HND_CTRL_BUSA 0x00000002 // Bus Fault Active
#define NVIC_SYS_HND_CTRL_MEMA 0x00000001 // Memory Management Fault Active
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_FAULT_STAT
// register.
//
//*****************************************************************************
#define NVIC_FAULT_STAT_DIV0 0x02000000 // Divide-by-Zero Usage Fault
#define NVIC_FAULT_STAT_UNALIGN 0x01000000 // Unaligned Access Usage Fault
#define NVIC_FAULT_STAT_NOCP 0x00080000 // No Coprocessor Usage Fault
#define NVIC_FAULT_STAT_INVPC 0x00040000 // Invalid PC Load Usage Fault
#define NVIC_FAULT_STAT_INVSTAT 0x00020000 // Invalid State Usage Fault
#define NVIC_FAULT_STAT_UNDEF 0x00010000 // Undefined Instruction Usage
// Fault
#define NVIC_FAULT_STAT_BFARV 0x00008000 // Bus Fault Address Register Valid
#define NVIC_FAULT_STAT_BLSPERR 0x00002000 // Bus Fault on Floating-Point Lazy
// State Preservation
#define NVIC_FAULT_STAT_BSTKE 0x00001000 // Stack Bus Fault
#define NVIC_FAULT_STAT_BUSTKE 0x00000800 // Unstack Bus Fault
#define NVIC_FAULT_STAT_IMPRE 0x00000400 // Imprecise Data Bus Error
#define NVIC_FAULT_STAT_PRECISE 0x00000200 // Precise Data Bus Error
#define NVIC_FAULT_STAT_IBUS 0x00000100 // Instruction Bus Error
#define NVIC_FAULT_STAT_MMARV 0x00000080 // Memory Management Fault Address
// Register Valid
#define NVIC_FAULT_STAT_MLSPERR 0x00000020 // Memory Management Fault on
// Floating-Point Lazy State
// Preservation
#define NVIC_FAULT_STAT_MSTKE 0x00000010 // Stack Access Violation
#define NVIC_FAULT_STAT_MUSTKE 0x00000008 // Unstack Access Violation
#define NVIC_FAULT_STAT_DERR 0x00000002 // Data Access Violation
#define NVIC_FAULT_STAT_IERR 0x00000001 // Instruction Access Violation
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_HFAULT_STAT
// register.
//
//*****************************************************************************
#define NVIC_HFAULT_STAT_DBG 0x80000000 // Debug Event
#define NVIC_HFAULT_STAT_FORCED 0x40000000 // Forced Hard Fault
#define NVIC_HFAULT_STAT_VECT 0x00000002 // Vector Table Read Fault
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_DEBUG_STAT
// register.
//
//*****************************************************************************
#define NVIC_DEBUG_STAT_EXTRNL 0x00000010 // EDBGRQ asserted
#define NVIC_DEBUG_STAT_VCATCH 0x00000008 // Vector catch
#define NVIC_DEBUG_STAT_DWTTRAP 0x00000004 // DWT match
#define NVIC_DEBUG_STAT_BKPT 0x00000002 // Breakpoint instruction
#define NVIC_DEBUG_STAT_HALTED 0x00000001 // Halt request
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_MM_ADDR register.
//
//*****************************************************************************
#define NVIC_MM_ADDR_M 0xFFFFFFFF // Fault Address
#define NVIC_MM_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_FAULT_ADDR
// register.
//
//*****************************************************************************
#define NVIC_FAULT_ADDR_M 0xFFFFFFFF // Fault Address
#define NVIC_FAULT_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_CPAC register.
//
//*****************************************************************************
#define NVIC_CPAC_CP11_M 0x00C00000 // CP11 Coprocessor Access
// Privilege
#define NVIC_CPAC_CP11_DIS 0x00000000 // Access Denied
#define NVIC_CPAC_CP11_PRIV 0x00400000 // Privileged Access Only
#define NVIC_CPAC_CP11_FULL 0x00C00000 // Full Access
#define NVIC_CPAC_CP10_M 0x00300000 // CP10 Coprocessor Access
// Privilege
#define NVIC_CPAC_CP10_DIS 0x00000000 // Access Denied
#define NVIC_CPAC_CP10_PRIV 0x00100000 // Privileged Access Only
#define NVIC_CPAC_CP10_FULL 0x00300000 // Full Access
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_MPU_TYPE register.
//
//*****************************************************************************
#define NVIC_MPU_TYPE_IREGION_M 0x00FF0000 // Number of I Regions
#define NVIC_MPU_TYPE_DREGION_M 0x0000FF00 // Number of D Regions
#define NVIC_MPU_TYPE_SEPARATE 0x00000001 // Separate or Unified MPU
#define NVIC_MPU_TYPE_IREGION_S 16
#define NVIC_MPU_TYPE_DREGION_S 8
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_MPU_CTRL register.
//
//*****************************************************************************
#define NVIC_MPU_CTRL_PRIVDEFEN 0x00000004 // MPU Default Region
#define NVIC_MPU_CTRL_HFNMIENA 0x00000002 // MPU Enabled During Faults
#define NVIC_MPU_CTRL_ENABLE 0x00000001 // MPU Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_MPU_NUMBER
// register.
//
//*****************************************************************************
#define NVIC_MPU_NUMBER_M 0x00000007 // MPU Region to Access
#define NVIC_MPU_NUMBER_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_MPU_BASE register.
//
//*****************************************************************************
#define NVIC_MPU_BASE_ADDR_M 0xFFFFFFE0 // Base Address Mask
#define NVIC_MPU_BASE_VALID 0x00000010 // Region Number Valid
#define NVIC_MPU_BASE_REGION_M 0x00000007 // Region Number
#define NVIC_MPU_BASE_ADDR_S 5
#define NVIC_MPU_BASE_REGION_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_MPU_ATTR register.
//
//*****************************************************************************
#define NVIC_MPU_ATTR_XN 0x10000000 // Instruction Access Disable
#define NVIC_MPU_ATTR_AP_M 0x07000000 // Access Privilege
#define NVIC_MPU_ATTR_TEX_M 0x00380000 // Type Extension Mask
#define NVIC_MPU_ATTR_SHAREABLE 0x00040000 // Shareable
#define NVIC_MPU_ATTR_CACHEABLE 0x00020000 // Cacheable
#define NVIC_MPU_ATTR_BUFFRABLE 0x00010000 // Bufferable
#define NVIC_MPU_ATTR_SRD_M 0x0000FF00 // Subregion Disable Bits
#define NVIC_MPU_ATTR_SIZE_M 0x0000003E // Region Size Mask
#define NVIC_MPU_ATTR_ENABLE 0x00000001 // Region Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_MPU_BASE1 register.
//
//*****************************************************************************
#define NVIC_MPU_BASE1_ADDR_M 0xFFFFFFE0 // Base Address Mask
#define NVIC_MPU_BASE1_VALID 0x00000010 // Region Number Valid
#define NVIC_MPU_BASE1_REGION_M 0x00000007 // Region Number
#define NVIC_MPU_BASE1_ADDR_S 5
#define NVIC_MPU_BASE1_REGION_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_MPU_ATTR1 register.
//
//*****************************************************************************
#define NVIC_MPU_ATTR1_XN 0x10000000 // Instruction Access Disable
#define NVIC_MPU_ATTR1_AP_M 0x07000000 // Access Privilege
#define NVIC_MPU_ATTR1_TEX_M 0x00380000 // Type Extension Mask
#define NVIC_MPU_ATTR1_SHAREABLE \
0x00040000 // Shareable
#define NVIC_MPU_ATTR1_CACHEABLE \
0x00020000 // Cacheable
#define NVIC_MPU_ATTR1_BUFFRABLE \
0x00010000 // Bufferable
#define NVIC_MPU_ATTR1_SRD_M 0x0000FF00 // Subregion Disable Bits
#define NVIC_MPU_ATTR1_SIZE_M 0x0000003E // Region Size Mask
#define NVIC_MPU_ATTR1_ENABLE 0x00000001 // Region Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_MPU_BASE2 register.
//
//*****************************************************************************
#define NVIC_MPU_BASE2_ADDR_M 0xFFFFFFE0 // Base Address Mask
#define NVIC_MPU_BASE2_VALID 0x00000010 // Region Number Valid
#define NVIC_MPU_BASE2_REGION_M 0x00000007 // Region Number
#define NVIC_MPU_BASE2_ADDR_S 5
#define NVIC_MPU_BASE2_REGION_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_MPU_ATTR2 register.
//
//*****************************************************************************
#define NVIC_MPU_ATTR2_XN 0x10000000 // Instruction Access Disable
#define NVIC_MPU_ATTR2_AP_M 0x07000000 // Access Privilege
#define NVIC_MPU_ATTR2_TEX_M 0x00380000 // Type Extension Mask
#define NVIC_MPU_ATTR2_SHAREABLE \
0x00040000 // Shareable
#define NVIC_MPU_ATTR2_CACHEABLE \
0x00020000 // Cacheable
#define NVIC_MPU_ATTR2_BUFFRABLE \
0x00010000 // Bufferable
#define NVIC_MPU_ATTR2_SRD_M 0x0000FF00 // Subregion Disable Bits
#define NVIC_MPU_ATTR2_SIZE_M 0x0000003E // Region Size Mask
#define NVIC_MPU_ATTR2_ENABLE 0x00000001 // Region Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_MPU_BASE3 register.
//
//*****************************************************************************
#define NVIC_MPU_BASE3_ADDR_M 0xFFFFFFE0 // Base Address Mask
#define NVIC_MPU_BASE3_VALID 0x00000010 // Region Number Valid
#define NVIC_MPU_BASE3_REGION_M 0x00000007 // Region Number
#define NVIC_MPU_BASE3_ADDR_S 5
#define NVIC_MPU_BASE3_REGION_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_MPU_ATTR3 register.
//
//*****************************************************************************
#define NVIC_MPU_ATTR3_XN 0x10000000 // Instruction Access Disable
#define NVIC_MPU_ATTR3_AP_M 0x07000000 // Access Privilege
#define NVIC_MPU_ATTR3_TEX_M 0x00380000 // Type Extension Mask
#define NVIC_MPU_ATTR3_SHAREABLE \
0x00040000 // Shareable
#define NVIC_MPU_ATTR3_CACHEABLE \
0x00020000 // Cacheable
#define NVIC_MPU_ATTR3_BUFFRABLE \
0x00010000 // Bufferable
#define NVIC_MPU_ATTR3_SRD_M 0x0000FF00 // Subregion Disable Bits
#define NVIC_MPU_ATTR3_SIZE_M 0x0000003E // Region Size Mask
#define NVIC_MPU_ATTR3_ENABLE 0x00000001 // Region Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_DBG_CTRL register.
//
//*****************************************************************************
#define NVIC_DBG_CTRL_DBGKEY_M 0xFFFF0000 // Debug key mask
#define NVIC_DBG_CTRL_DBGKEY 0xA05F0000 // Debug key
#define NVIC_DBG_CTRL_S_RESET_ST \
0x02000000 // Core has reset since last read
#define NVIC_DBG_CTRL_S_RETIRE_ST \
0x01000000 // Core has executed insruction
// since last read
#define NVIC_DBG_CTRL_S_LOCKUP 0x00080000 // Core is locked up
#define NVIC_DBG_CTRL_S_SLEEP 0x00040000 // Core is sleeping
#define NVIC_DBG_CTRL_S_HALT 0x00020000 // Core status on halt
#define NVIC_DBG_CTRL_S_REGRDY 0x00010000 // Register read/write available
#define NVIC_DBG_CTRL_C_SNAPSTALL \
0x00000020 // Breaks a stalled load/store
#define NVIC_DBG_CTRL_C_MASKINT 0x00000008 // Mask interrupts when stepping
#define NVIC_DBG_CTRL_C_STEP 0x00000004 // Step the core
#define NVIC_DBG_CTRL_C_HALT 0x00000002 // Halt the core
#define NVIC_DBG_CTRL_C_DEBUGEN 0x00000001 // Enable debug
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_DBG_XFER register.
//
//*****************************************************************************
#define NVIC_DBG_XFER_REG_WNR 0x00010000 // Write or not read
#define NVIC_DBG_XFER_REG_SEL_M 0x0000001F // Register
#define NVIC_DBG_XFER_REG_R0 0x00000000 // Register R0
#define NVIC_DBG_XFER_REG_R1 0x00000001 // Register R1
#define NVIC_DBG_XFER_REG_R2 0x00000002 // Register R2
#define NVIC_DBG_XFER_REG_R3 0x00000003 // Register R3
#define NVIC_DBG_XFER_REG_R4 0x00000004 // Register R4
#define NVIC_DBG_XFER_REG_R5 0x00000005 // Register R5
#define NVIC_DBG_XFER_REG_R6 0x00000006 // Register R6
#define NVIC_DBG_XFER_REG_R7 0x00000007 // Register R7
#define NVIC_DBG_XFER_REG_R8 0x00000008 // Register R8
#define NVIC_DBG_XFER_REG_R9 0x00000009 // Register R9
#define NVIC_DBG_XFER_REG_R10 0x0000000A // Register R10
#define NVIC_DBG_XFER_REG_R11 0x0000000B // Register R11
#define NVIC_DBG_XFER_REG_R12 0x0000000C // Register R12
#define NVIC_DBG_XFER_REG_R13 0x0000000D // Register R13
#define NVIC_DBG_XFER_REG_R14 0x0000000E // Register R14
#define NVIC_DBG_XFER_REG_R15 0x0000000F // Register R15
#define NVIC_DBG_XFER_REG_FLAGS 0x00000010 // xPSR/Flags register
#define NVIC_DBG_XFER_REG_MSP 0x00000011 // Main SP
#define NVIC_DBG_XFER_REG_PSP 0x00000012 // Process SP
#define NVIC_DBG_XFER_REG_DSP 0x00000013 // Deep SP
#define NVIC_DBG_XFER_REG_CFBP 0x00000014 // Control/Fault/BasePri/PriMask
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_DBG_DATA register.
//
//*****************************************************************************
#define NVIC_DBG_DATA_M 0xFFFFFFFF // Data temporary cache
#define NVIC_DBG_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_DBG_INT register.
//
//*****************************************************************************
#define NVIC_DBG_INT_HARDERR 0x00000400 // Debug trap on hard fault
#define NVIC_DBG_INT_INTERR 0x00000200 // Debug trap on interrupt errors
#define NVIC_DBG_INT_BUSERR 0x00000100 // Debug trap on bus error
#define NVIC_DBG_INT_STATERR 0x00000080 // Debug trap on usage fault state
#define NVIC_DBG_INT_CHKERR 0x00000040 // Debug trap on usage fault check
#define NVIC_DBG_INT_NOCPERR 0x00000020 // Debug trap on coprocessor error
#define NVIC_DBG_INT_MMERR 0x00000010 // Debug trap on mem manage fault
#define NVIC_DBG_INT_RESET 0x00000008 // Core reset status
#define NVIC_DBG_INT_RSTPENDCLR 0x00000004 // Clear pending core reset
#define NVIC_DBG_INT_RSTPENDING 0x00000002 // Core reset is pending
#define NVIC_DBG_INT_RSTVCATCH 0x00000001 // Reset vector catch
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_SW_TRIG register.
//
//*****************************************************************************
#define NVIC_SW_TRIG_INTID_M 0x000000FF // Interrupt ID
#define NVIC_SW_TRIG_INTID_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_FPCC register.
//
//*****************************************************************************
#define NVIC_FPCC_ASPEN 0x80000000 // Automatic State Preservation
// Enable
#define NVIC_FPCC_LSPEN 0x40000000 // Lazy State Preservation Enable
#define NVIC_FPCC_MONRDY 0x00000100 // Monitor Ready
#define NVIC_FPCC_BFRDY 0x00000040 // Bus Fault Ready
#define NVIC_FPCC_MMRDY 0x00000020 // Memory Management Fault Ready
#define NVIC_FPCC_HFRDY 0x00000010 // Hard Fault Ready
#define NVIC_FPCC_THREAD 0x00000008 // Thread Mode
#define NVIC_FPCC_USER 0x00000002 // User Privilege Level
#define NVIC_FPCC_LSPACT 0x00000001 // Lazy State Preservation Active
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_FPCA register.
//
//*****************************************************************************
#define NVIC_FPCA_ADDRESS_M 0xFFFFFFF8 // Address
#define NVIC_FPCA_ADDRESS_S 3
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_FPDSC register.
//
//*****************************************************************************
#define NVIC_FPDSC_AHP 0x04000000 // AHP Bit Default
#define NVIC_FPDSC_DN 0x02000000 // DN Bit Default
#define NVIC_FPDSC_FZ 0x01000000 // FZ Bit Default
#define NVIC_FPDSC_RMODE_M 0x00C00000 // RMODE Bit Default
#define NVIC_FPDSC_RMODE_RN 0x00000000 // Round to Nearest (RN) mode
#define NVIC_FPDSC_RMODE_RP 0x00400000 // Round towards Plus Infinity (RP)
// mode
#define NVIC_FPDSC_RMODE_RM 0x00800000 // Round towards Minus Infinity
// (RM) mode
#define NVIC_FPDSC_RMODE_RZ 0x00C00000 // Round towards Zero (RZ) mode
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_CFG register.
//
//*****************************************************************************
#define EMAC_CFG_TWOKPEN 0x08000000 // IEEE 802
#define EMAC_CFG_CST 0x02000000 // CRC Stripping for Type Frames
#define EMAC_CFG_WDDIS 0x00800000 // Watchdog Disable
#define EMAC_CFG_JD 0x00400000 // Jabber Disable
#define EMAC_CFG_JFEN 0x00100000 // Jumbo Frame Enable
#define EMAC_CFG_IFG_M 0x000E0000 // Inter-Frame Gap (IFG)
#define EMAC_CFG_IFG_96 0x00000000 // 96 bit times
#define EMAC_CFG_IFG_88 0x00020000 // 88 bit times
#define EMAC_CFG_IFG_80 0x00040000 // 80 bit times
#define EMAC_CFG_IFG_72 0x00060000 // 72 bit times
#define EMAC_CFG_IFG_64 0x00080000 // 64 bit times
#define EMAC_CFG_IFG_56 0x000A0000 // 56 bit times
#define EMAC_CFG_IFG_48 0x000C0000 // 48 bit times
#define EMAC_CFG_IFG_40 0x000E0000 // 40 bit times
#define EMAC_CFG_DISCRS 0x00010000 // Disable Carrier Sense During
// Transmission
#define EMAC_CFG_PS 0x00008000 // Port Select
#define EMAC_CFG_FES 0x00004000 // Speed
#define EMAC_CFG_DRO 0x00002000 // Disable Receive Own
#define EMAC_CFG_LOOPBM 0x00001000 // Loopback Mode
#define EMAC_CFG_DUPM 0x00000800 // Duplex Mode
#define EMAC_CFG_IPC 0x00000400 // Checksum Offload
#define EMAC_CFG_DR 0x00000200 // Disable Retry
#define EMAC_CFG_ACS 0x00000080 // Automatic Pad or CRC Stripping
#define EMAC_CFG_BL_M 0x00000060 // Back-Off Limit
#define EMAC_CFG_BL_1024 0x00000000 // k = min (n,10)
#define EMAC_CFG_BL_256 0x00000020 // k = min (n,8)
#define EMAC_CFG_BL_8 0x00000040 // k = min (n,4)
#define EMAC_CFG_BL_2 0x00000060 // k = min (n,1)
#define EMAC_CFG_DC 0x00000010 // Deferral Check
#define EMAC_CFG_TE 0x00000008 // Transmitter Enable
#define EMAC_CFG_RE 0x00000004 // Receiver Enable
#define EMAC_CFG_PRELEN_M 0x00000003 // Preamble Length for Transmit
// Frames
#define EMAC_CFG_PRELEN_7 0x00000000 // 7 bytes of preamble
#define EMAC_CFG_PRELEN_5 0x00000001 // 5 bytes of preamble
#define EMAC_CFG_PRELEN_3 0x00000002 // 3 bytes of preamble
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_FRAMEFLTR
// register.
//
//*****************************************************************************
#define EMAC_FRAMEFLTR_RA 0x80000000 // Receive All
#define EMAC_FRAMEFLTR_VTFE 0x00010000 // VLAN Tag Filter Enable
#define EMAC_FRAMEFLTR_HPF 0x00000400 // Hash or Perfect Filter
#define EMAC_FRAMEFLTR_SAF 0x00000200 // Source Address Filter Enable
#define EMAC_FRAMEFLTR_SAIF 0x00000100 // Source Address (SA) Inverse
// Filtering
#define EMAC_FRAMEFLTR_PCF_M 0x000000C0 // Pass Control Frames
#define EMAC_FRAMEFLTR_PCF_ALL 0x00000000 // The MAC filters all control
// frames from reaching application
#define EMAC_FRAMEFLTR_PCF_PAUSE \
0x00000040 // MAC forwards all control frames
// except PAUSE control frames to
// application even if they fail
// the address filter
#define EMAC_FRAMEFLTR_PCF_NONE 0x00000080 // MAC forwards all control frames
// to application even if they fail
// the address Filter
#define EMAC_FRAMEFLTR_PCF_ADDR 0x000000C0 // MAC forwards control frames that
// pass the address Filter
#define EMAC_FRAMEFLTR_DBF 0x00000020 // Disable Broadcast Frames
#define EMAC_FRAMEFLTR_PM 0x00000010 // Pass All Multicast
#define EMAC_FRAMEFLTR_DAIF 0x00000008 // Destination Address (DA) Inverse
// Filtering
#define EMAC_FRAMEFLTR_HMC 0x00000004 // Hash Multicast
#define EMAC_FRAMEFLTR_HUC 0x00000002 // Hash Unicast
#define EMAC_FRAMEFLTR_PR 0x00000001 // Promiscuous Mode
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_HASHTBLH
// register.
//
//*****************************************************************************
#define EMAC_HASHTBLH_HTH_M 0xFFFFFFFF // Hash Table High
#define EMAC_HASHTBLH_HTH_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_HASHTBLL
// register.
//
//*****************************************************************************
#define EMAC_HASHTBLL_HTL_M 0xFFFFFFFF // Hash Table Low
#define EMAC_HASHTBLL_HTL_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_MIIADDR register.
//
//*****************************************************************************
#define EMAC_MIIADDR_PLA_M 0x0000F800 // Physical Layer Address
#define EMAC_MIIADDR_MII_M 0x000007C0 // MII Register
#define EMAC_MIIADDR_CR_M 0x0000003C // Clock Reference Frequency
// Selection
#define EMAC_MIIADDR_CR_60_100 0x00000000 // The frequency of the System
// Clock is 60 to 100 MHz providing
// a MDIO clock of SYSCLK/42
#define EMAC_MIIADDR_CR_100_150 0x00000004 // The frequency of the System
// Clock is 100 to 150 MHz
// providing a MDIO clock of
// SYSCLK/62
#define EMAC_MIIADDR_CR_20_35 0x00000008 // The frequency of the System
// Clock is 20-35 MHz providing a
// MDIO clock of System Clock/16
#define EMAC_MIIADDR_CR_35_60 0x0000000C // The frequency of the System
// Clock is 35 to 60 MHz providing
// a MDIO clock of System Clock/26
#define EMAC_MIIADDR_MIIW 0x00000002 // MII Write
#define EMAC_MIIADDR_MIIB 0x00000001 // MII Busy
#define EMAC_MIIADDR_PLA_S 11
#define EMAC_MIIADDR_MII_S 6
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_MIIDATA register.
//
//*****************************************************************************
#define EMAC_MIIDATA_DATA_M 0x0000FFFF // MII Data
#define EMAC_MIIDATA_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_FLOWCTL register.
//
//*****************************************************************************
#define EMAC_FLOWCTL_PT_M 0xFFFF0000 // Pause Time
#define EMAC_FLOWCTL_DZQP 0x00000080 // Disable Zero-Quanta Pause
#define EMAC_FLOWCTL_UP 0x00000008 // Unicast Pause Frame Detect
#define EMAC_FLOWCTL_RFE 0x00000004 // Receive Flow Control Enable
#define EMAC_FLOWCTL_TFE 0x00000002 // Transmit Flow Control Enable
#define EMAC_FLOWCTL_FCBBPA 0x00000001 // Flow Control Busy or
// Back-pressure Activate
#define EMAC_FLOWCTL_PT_S 16
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_VLANTG register.
//
//*****************************************************************************
#define EMAC_VLANTG_VTHM 0x00080000 // VLAN Tag Hash Table Match Enable
#define EMAC_VLANTG_ESVL 0x00040000 // Enable S-VLAN
#define EMAC_VLANTG_VTIM 0x00020000 // VLAN Tag Inverse Match Enable
#define EMAC_VLANTG_ETV 0x00010000 // Enable 12-Bit VLAN Tag
// Comparison
#define EMAC_VLANTG_VL_M 0x0000FFFF // VLAN Tag Identifier for Receive
// Frames
#define EMAC_VLANTG_VL_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_STATUS register.
//
//*****************************************************************************
#define EMAC_STATUS_TXFF 0x02000000 // TX/RX Controller TX FIFO Full
// Status
#define EMAC_STATUS_TXFE 0x01000000 // TX/RX Controller TX FIFO Not
// Empty Status
#define EMAC_STATUS_TWC 0x00400000 // TX/RX Controller TX FIFO Write
// Controller Active Status
#define EMAC_STATUS_TRC_M 0x00300000 // TX/RX Controller's TX FIFO Read
// Controller Status
#define EMAC_STATUS_TRC_IDLE 0x00000000 // IDLE state
#define EMAC_STATUS_TRC_READ 0x00100000 // READ state (transferring data to
// MAC transmitter)
#define EMAC_STATUS_TRC_WAIT 0x00200000 // Waiting for TX Status from MAC
// transmitter
#define EMAC_STATUS_TRC_WRFLUSH 0x00300000 // Writing the received TX Status
// or flushing the TX FIFO
#define EMAC_STATUS_TXPAUSED 0x00080000 // MAC Transmitter PAUSE
#define EMAC_STATUS_TFC_M 0x00060000 // MAC Transmit Frame Controller
// Status
#define EMAC_STATUS_TFC_IDLE 0x00000000 // IDLE state
#define EMAC_STATUS_TFC_STATUS 0x00020000 // Waiting for status of previous
// frame or IFG or backoff period
// to be over
#define EMAC_STATUS_TFC_PAUSE 0x00040000 // Generating and transmitting a
// PAUSE control frame (in the
// full-duplex mode)
#define EMAC_STATUS_TFC_INPUT 0x00060000 // Transferring input frame for
// transmission
#define EMAC_STATUS_TPE 0x00010000 // MAC MII Transmit Protocol Engine
// Status
#define EMAC_STATUS_RXF_M 0x00000300 // TX/RX Controller RX FIFO
// Fill-level Status
#define EMAC_STATUS_RXF_EMPTY 0x00000000 // RX FIFO Empty
#define EMAC_STATUS_RXF_BELOW 0x00000100 // RX FIFO fill level is below the
// flow-control deactivate
// threshold
#define EMAC_STATUS_RXF_ABOVE 0x00000200 // RX FIFO fill level is above the
// flow-control activate threshold
#define EMAC_STATUS_RXF_FULL 0x00000300 // RX FIFO Full
#define EMAC_STATUS_RRC_M 0x00000060 // TX/RX Controller Read Controller
// State
#define EMAC_STATUS_RRC_IDLE 0x00000000 // IDLE state
#define EMAC_STATUS_RRC_STATUS 0x00000020 // Reading frame data
#define EMAC_STATUS_RRC_DATA 0x00000040 // Reading frame status (or
// timestamp)
#define EMAC_STATUS_RRC_FLUSH 0x00000060 // Flushing the frame data and
// status
#define EMAC_STATUS_RWC 0x00000010 // TX/RX Controller RX FIFO Write
// Controller Active Status
#define EMAC_STATUS_RFCFC_M 0x00000006 // MAC Receive Frame Controller
// FIFO Status
#define EMAC_STATUS_RPE 0x00000001 // MAC MII Receive Protocol Engine
// Status
#define EMAC_STATUS_RFCFC_S 1
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_RWUFF register.
//
//*****************************************************************************
#define EMAC_RWUFF_WAKEUPFIL_M 0xFFFFFFFF // Remote Wake-Up Frame Filter
#define EMAC_RWUFF_WAKEUPFIL_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_PMTCTLSTAT
// register.
//
//*****************************************************************************
#define EMAC_PMTCTLSTAT_WUPFRRST \
0x80000000 // Wake-Up Frame Filter Register
// Pointer Reset
#define EMAC_PMTCTLSTAT_RWKPTR_M \
0x07000000 // Remote Wake-Up FIFO Pointer
#define EMAC_PMTCTLSTAT_GLBLUCAST \
0x00000200 // Global Unicast
#define EMAC_PMTCTLSTAT_WUPRX 0x00000040 // Wake-Up Frame Received
#define EMAC_PMTCTLSTAT_MGKPRX 0x00000020 // Magic Packet Received
#define EMAC_PMTCTLSTAT_WUPFREN 0x00000004 // Wake-Up Frame Enable
#define EMAC_PMTCTLSTAT_MGKPKTEN \
0x00000002 // Magic Packet Enable
#define EMAC_PMTCTLSTAT_PWRDWN 0x00000001 // Power Down
#define EMAC_PMTCTLSTAT_RWKPTR_S \
24
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_LPICTLSTAT
// register.
//
//*****************************************************************************
#define EMAC_LPICTLSTAT_LPITXA 0x00080000 // LPI TX Automate
#define EMAC_LPICTLSTAT_PLSEN 0x00040000 // PHY Link Status Enable
#define EMAC_LPICTLSTAT_PLS 0x00020000 // PHY Link Status
#define EMAC_LPICTLSTAT_LPIEN 0x00010000 // LPI Enable
#define EMAC_LPICTLSTAT_RLPIST 0x00000200 // Receive LPI State
#define EMAC_LPICTLSTAT_TLPIST 0x00000100 // Transmit LPI State
#define EMAC_LPICTLSTAT_RLPIEX 0x00000008 // Receive LPI Exit
#define EMAC_LPICTLSTAT_RLPIEN 0x00000004 // Receive LPI Entry
#define EMAC_LPICTLSTAT_TLPIEX 0x00000002 // Transmit LPI Exit
#define EMAC_LPICTLSTAT_TLPIEN 0x00000001 // Transmit LPI Entry
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_LPITIMERCTL
// register.
//
//*****************************************************************************
#define EMAC_LPITIMERCTL_LST_M 0x03FF0000 // Low Power Idle LS Timer
#define EMAC_LPITIMERCTL_LST_S 16
#define EMAC_LPITIMERCTL_TWT_M 0x0000FFFF // Low Power Idle TW Timer
#define EMAC_LPITIMERCTL_TWT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_RIS register.
//
//*****************************************************************************
#define EMAC_RIS_LPI 0x00000400 // LPI Interrupt Status
#define EMAC_RIS_TS 0x00000200 // Timestamp Interrupt Status
#define EMAC_RIS_MMCTX 0x00000040 // MMC Transmit Interrupt Status
#define EMAC_RIS_MMCRX 0x00000020 // MMC Receive Interrupt Status
#define EMAC_RIS_MMC 0x00000010 // MMC Interrupt Status
#define EMAC_RIS_PMT 0x00000008 // PMT Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_IM register.
//
//*****************************************************************************
#define EMAC_IM_LPI 0x00000400 // LPI Interrupt Mask
#define EMAC_IM_TSI 0x00000200 // Timestamp Interrupt Mask
#define EMAC_IM_PMT 0x00000008 // PMT Interrupt Mask
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_ADDR0H register.
//
//*****************************************************************************
#define EMAC_ADDR0H_AE 0x80000000 // Address Enable
#define EMAC_ADDR0H_ADDRHI_M 0x0000FFFF // MAC Address0 [47:32]
#define EMAC_ADDR0H_ADDRHI_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_ADDR0L register.
//
//*****************************************************************************
#define EMAC_ADDR0L_ADDRLO_M 0xFFFFFFFF // MAC Address0 [31:0]
#define EMAC_ADDR0L_ADDRLO_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_ADDR1H register.
//
//*****************************************************************************
#define EMAC_ADDR1H_AE 0x80000000 // Address Enable
#define EMAC_ADDR1H_SA 0x40000000 // Source Address
#define EMAC_ADDR1H_MBC_M 0x3F000000 // Mask Byte Control
#define EMAC_ADDR1H_ADDRHI_M 0x0000FFFF // MAC Address1 [47:32]
#define EMAC_ADDR1H_MBC_S 24
#define EMAC_ADDR1H_ADDRHI_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_ADDR1L register.
//
//*****************************************************************************
#define EMAC_ADDR1L_ADDRLO_M 0xFFFFFFFF // MAC Address1 [31:0]
#define EMAC_ADDR1L_ADDRLO_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_ADDR2H register.
//
//*****************************************************************************
#define EMAC_ADDR2H_AE 0x80000000 // Address Enable
#define EMAC_ADDR2H_SA 0x40000000 // Source Address
#define EMAC_ADDR2H_MBC_M 0x3F000000 // Mask Byte Control
#define EMAC_ADDR2H_ADDRHI_M 0x0000FFFF // MAC Address2 [47:32]
#define EMAC_ADDR2H_MBC_S 24
#define EMAC_ADDR2H_ADDRHI_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_ADDR2L register.
//
//*****************************************************************************
#define EMAC_ADDR2L_ADDRLO_M 0xFFFFFFFF // MAC Address2 [31:0]
#define EMAC_ADDR2L_ADDRLO_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_ADDR3H register.
//
//*****************************************************************************
#define EMAC_ADDR3H_AE 0x80000000 // Address Enable
#define EMAC_ADDR3H_SA 0x40000000 // Source Address
#define EMAC_ADDR3H_MBC_M 0x3F000000 // Mask Byte Control
#define EMAC_ADDR3H_ADDRHI_M 0x0000FFFF // MAC Address3 [47:32]
#define EMAC_ADDR3H_MBC_S 24
#define EMAC_ADDR3H_ADDRHI_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_ADDR3L register.
//
//*****************************************************************************
#define EMAC_ADDR3L_ADDRLO_M 0xFFFFFFFF // MAC Address3 [31:0]
#define EMAC_ADDR3L_ADDRLO_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_WDOGTO register.
//
//*****************************************************************************
#define EMAC_WDOGTO_PWE 0x00010000 // Programmable Watchdog Enable
#define EMAC_WDOGTO_WTO_M 0x00003FFF // Watchdog Timeout
#define EMAC_WDOGTO_WTO_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_MMCCTRL register.
//
//*****************************************************************************
#define EMAC_MMCCTRL_UCDBC 0x00000100 // Update MMC Counters for Dropped
// Broadcast Frames
#define EMAC_MMCCTRL_CNTPRSTLVL 0x00000020 // Full/Half Preset Level Value
#define EMAC_MMCCTRL_CNTPRST 0x00000010 // Counters Preset
#define EMAC_MMCCTRL_CNTFREEZ 0x00000008 // MMC Counter Freeze
#define EMAC_MMCCTRL_RSTONRD 0x00000004 // Reset on Read
#define EMAC_MMCCTRL_CNTSTPRO 0x00000002 // Counters Stop Rollover
#define EMAC_MMCCTRL_CNTRST 0x00000001 // Counters Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_MMCRXRIS
// register.
//
//*****************************************************************************
#define EMAC_MMCRXRIS_UCGF 0x00020000 // MMC Receive Unicast Good Frame
// Counter Interrupt Status
#define EMAC_MMCRXRIS_ALGNERR 0x00000040 // MMC Receive Alignment Error
// Frame Counter Interrupt Status
#define EMAC_MMCRXRIS_CRCERR 0x00000020 // MMC Receive CRC Error Frame
// Counter Interrupt Status
#define EMAC_MMCRXRIS_GBF 0x00000001 // MMC Receive Good Bad Frame
// Counter Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_MMCTXRIS
// register.
//
//*****************************************************************************
#define EMAC_MMCTXRIS_OCTCNT 0x00100000 // Octet Counter Interrupt Status
#define EMAC_MMCTXRIS_MCOLLGF 0x00008000 // MMC Transmit Multiple Collision
// Good Frame Counter Interrupt
// Status
#define EMAC_MMCTXRIS_SCOLLGF 0x00004000 // MMC Transmit Single Collision
// Good Frame Counter Interrupt
// Status
#define EMAC_MMCTXRIS_GBF 0x00000002 // MMC Transmit Good Bad Frame
// Counter Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_MMCRXIM register.
//
//*****************************************************************************
#define EMAC_MMCRXIM_UCGF 0x00020000 // MMC Receive Unicast Good Frame
// Counter Interrupt Mask
#define EMAC_MMCRXIM_ALGNERR 0x00000040 // MMC Receive Alignment Error
// Frame Counter Interrupt Mask
#define EMAC_MMCRXIM_CRCERR 0x00000020 // MMC Receive CRC Error Frame
// Counter Interrupt Mask
#define EMAC_MMCRXIM_GBF 0x00000001 // MMC Receive Good Bad Frame
// Counter Interrupt Mask
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_MMCTXIM register.
//
//*****************************************************************************
#define EMAC_MMCTXIM_OCTCNT 0x00100000 // MMC Transmit Good Octet Counter
// Interrupt Mask
#define EMAC_MMCTXIM_MCOLLGF 0x00008000 // MMC Transmit Multiple Collision
// Good Frame Counter Interrupt
// Mask
#define EMAC_MMCTXIM_SCOLLGF 0x00004000 // MMC Transmit Single Collision
// Good Frame Counter Interrupt
// Mask
#define EMAC_MMCTXIM_GBF 0x00000002 // MMC Transmit Good Bad Frame
// Counter Interrupt Mask
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_TXCNTGB register.
//
//*****************************************************************************
#define EMAC_TXCNTGB_TXFRMGB_M 0xFFFFFFFF // This field indicates the number
// of good and bad frames
// transmitted, exclusive of
// retried frames
#define EMAC_TXCNTGB_TXFRMGB_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_TXCNTSCOL
// register.
//
//*****************************************************************************
#define EMAC_TXCNTSCOL_TXSNGLCOLG_M \
0xFFFFFFFF // This field indicates the number
// of successfully transmitted
// frames after a single collision
// in the half-duplex mode
#define EMAC_TXCNTSCOL_TXSNGLCOLG_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_TXCNTMCOL
// register.
//
//*****************************************************************************
#define EMAC_TXCNTMCOL_TXMULTCOLG_M \
0xFFFFFFFF // This field indicates the number
// of successfully transmitted
// frames after multiple collisions
// in the half-duplex mode
#define EMAC_TXCNTMCOL_TXMULTCOLG_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_TXOCTCNTG
// register.
//
//*****************************************************************************
#define EMAC_TXOCTCNTG_TXOCTG_M 0xFFFFFFFF // This field indicates the number
// of bytes transmitted, exclusive
// of preamble, in good frames
#define EMAC_TXOCTCNTG_TXOCTG_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_RXCNTGB register.
//
//*****************************************************************************
#define EMAC_RXCNTGB_RXFRMGB_M 0xFFFFFFFF // This field indicates the number
// of received good and bad frames
#define EMAC_RXCNTGB_RXFRMGB_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_RXCNTCRCERR
// register.
//
//*****************************************************************************
#define EMAC_RXCNTCRCERR_RXCRCERR_M \
0xFFFFFFFF // This field indicates the number
// of frames received with CRC
// error
#define EMAC_RXCNTCRCERR_RXCRCERR_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_RXCNTALGNERR
// register.
//
//*****************************************************************************
#define EMAC_RXCNTALGNERR_RXALGNERR_M \
0xFFFFFFFF // This field indicates the number
// of frames received with
// alignment (dribble) error
#define EMAC_RXCNTALGNERR_RXALGNERR_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_RXCNTGUNI
// register.
//
//*****************************************************************************
#define EMAC_RXCNTGUNI_RXUCASTG_M \
0xFFFFFFFF // This field indicates the number
// of received good unicast frames
#define EMAC_RXCNTGUNI_RXUCASTG_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_VLNINCREP
// register.
//
//*****************************************************************************
#define EMAC_VLNINCREP_CSVL 0x00080000 // C-VLAN or S-VLAN
#define EMAC_VLNINCREP_VLP 0x00040000 // VLAN Priority Control
#define EMAC_VLNINCREP_VLC_M 0x00030000 // VLAN Tag Control in Transmit
// Frames
#define EMAC_VLNINCREP_VLC_NONE 0x00000000 // No VLAN tag deletion, insertion,
// or replacement
#define EMAC_VLNINCREP_VLC_TAGDEL \
0x00010000 // VLAN tag deletion
#define EMAC_VLNINCREP_VLC_TAGINS \
0x00020000 // VLAN tag insertion
#define EMAC_VLNINCREP_VLC_TAGREP \
0x00030000 // VLAN tag replacement
#define EMAC_VLNINCREP_VLT_M 0x0000FFFF // VLAN Tag for Transmit Frames
#define EMAC_VLNINCREP_VLT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_VLANHASH
// register.
//
//*****************************************************************************
#define EMAC_VLANHASH_VLHT_M 0x0000FFFF // VLAN Hash Table
#define EMAC_VLANHASH_VLHT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_TIMSTCTRL
// register.
//
//*****************************************************************************
#define EMAC_TIMSTCTRL_PTPFLTR 0x00040000 // Enable MAC address for PTP Frame
// Filtering
#define EMAC_TIMSTCTRL_SELPTP_M 0x00030000 // Select PTP packets for Taking
// Snapshots
#define EMAC_TIMSTCTRL_TSMAST 0x00008000 // Enable Snapshot for Messages
// Relevant to Master
#define EMAC_TIMSTCTRL_TSEVNT 0x00004000 // Enable Timestamp Snapshot for
// Event Messages
#define EMAC_TIMSTCTRL_PTPIPV4 0x00002000 // Enable Processing of PTP Frames
// Sent over IPv4-UDP
#define EMAC_TIMSTCTRL_PTPIPV6 0x00001000 // Enable Processing of PTP Frames
// Sent Over IPv6-UDP
#define EMAC_TIMSTCTRL_PTPETH 0x00000800 // Enable Processing of PTP Over
// Ethernet Frames
#define EMAC_TIMSTCTRL_PTPVER2 0x00000400 // Enable PTP Packet Processing For
// Version 2 Format
#define EMAC_TIMSTCTRL_DGTLBIN 0x00000200 // Timestamp Digital or Binary
// Rollover Control
#define EMAC_TIMSTCTRL_ALLF 0x00000100 // Enable Timestamp For All Frames
#define EMAC_TIMSTCTRL_ADDREGUP 0x00000020 // Addend Register Update
#define EMAC_TIMSTCTRL_INTTRIG 0x00000010 // Timestamp Interrupt Trigger
// Enable
#define EMAC_TIMSTCTRL_TSUPDT 0x00000008 // Timestamp Update
#define EMAC_TIMSTCTRL_TSINIT 0x00000004 // Timestamp Initialize
#define EMAC_TIMSTCTRL_TSFCUPDT 0x00000002 // Timestamp Fine or Coarse Update
#define EMAC_TIMSTCTRL_TSEN 0x00000001 // Timestamp Enable
#define EMAC_TIMSTCTRL_SELPTP_S 16
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_SUBSECINC
// register.
//
//*****************************************************************************
#define EMAC_SUBSECINC_SSINC_M 0x000000FF // Sub-second Increment Value
#define EMAC_SUBSECINC_SSINC_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_TIMSEC register.
//
//*****************************************************************************
#define EMAC_TIMSEC_TSS_M 0xFFFFFFFF // Timestamp Second
#define EMAC_TIMSEC_TSS_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_TIMNANO register.
//
//*****************************************************************************
#define EMAC_TIMNANO_TSSS_M 0x7FFFFFFF // Timestamp Sub-Seconds
#define EMAC_TIMNANO_TSSS_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_TIMSECU register.
//
//*****************************************************************************
#define EMAC_TIMSECU_TSS_M 0xFFFFFFFF // Timestamp Second
#define EMAC_TIMSECU_TSS_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_TIMNANOU
// register.
//
//*****************************************************************************
#define EMAC_TIMNANOU_ADDSUB 0x80000000 // Add or subtract time
#define EMAC_TIMNANOU_TSSS_M 0x7FFFFFFF // Timestamp Sub-Second
#define EMAC_TIMNANOU_TSSS_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_TIMADD register.
//
//*****************************************************************************
#define EMAC_TIMADD_TSAR_M 0xFFFFFFFF // Timestamp Addend Register
#define EMAC_TIMADD_TSAR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_TARGSEC register.
//
//*****************************************************************************
#define EMAC_TARGSEC_TSTR_M 0xFFFFFFFF // Target Time Seconds Register
#define EMAC_TARGSEC_TSTR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_TARGNANO
// register.
//
//*****************************************************************************
#define EMAC_TARGNANO_TRGTBUSY 0x80000000 // Target Time Register Busy
#define EMAC_TARGNANO_TTSLO_M 0x7FFFFFFF // Target Timestamp Low Register
#define EMAC_TARGNANO_TTSLO_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_HWORDSEC
// register.
//
//*****************************************************************************
#define EMAC_HWORDSEC_TSHWR_M 0x0000FFFF // Target Timestamp Higher Word
// Register
#define EMAC_HWORDSEC_TSHWR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_TIMSTAT register.
//
//*****************************************************************************
#define EMAC_TIMSTAT_TSTARGT 0x00000002 // Timestamp Target Time Reached
#define EMAC_TIMSTAT_TSSOVF 0x00000001 // Timestamp Seconds Overflow
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_PPSCTRL register.
//
//*****************************************************************************
#define EMAC_PPSCTRL_TRGMODS0_M 0x00000060 // Target Time Register Mode for
// PPS0 Output
#define EMAC_PPSCTRL_TRGMODS0_INTONLY \
0x00000000 // Indicates that the Target Time
// registers are programmed only
// for generating the interrupt
// event
#define EMAC_PPSCTRL_TRGMODS0_INTPPS0 \
0x00000040 // Indicates that the Target Time
// registers are programmed for
// generating the interrupt event
// and starting or stopping the
// generation of the EN0PPS output
// signal
#define EMAC_PPSCTRL_TRGMODS0_PPS0ONLY \
0x00000060 // Indicates that the Target Time
// registers are programmed only
// for starting or stopping the
// generation of the EN0PPS output
// signal. No interrupt is asserted
#define EMAC_PPSCTRL_PPSEN0 0x00000010 // Flexible PPS Output Mode Enable
#define EMAC_PPSCTRL_PPSCTRL_M 0x0000000F // EN0PPS Output Frequency Control
// (PPSCTRL) or Command Control
// (PPSCMD)
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_PPS0INTVL
// register.
//
//*****************************************************************************
#define EMAC_PPS0INTVL_PPS0INT_M \
0xFFFFFFFF // PPS0 Output Signal Interval
#define EMAC_PPS0INTVL_PPS0INT_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_PPS0WIDTH
// register.
//
//*****************************************************************************
#define EMAC_PPS0WIDTH_M 0xFFFFFFFF // EN0PPS Output Signal Width
#define EMAC_PPS0WIDTH_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_DMABUSMOD
// register.
//
//*****************************************************************************
#define EMAC_DMABUSMOD_RIB 0x80000000 // Rebuild Burst
#define EMAC_DMABUSMOD_TXPR 0x08000000 // Transmit Priority
#define EMAC_DMABUSMOD_MB 0x04000000 // Mixed Burst
#define EMAC_DMABUSMOD_AAL 0x02000000 // Address Aligned Beats
#define EMAC_DMABUSMOD_8XPBL 0x01000000 // 8 x Programmable Burst Length
// (PBL) Mode
#define EMAC_DMABUSMOD_USP 0x00800000 // Use Separate Programmable Burst
// Length (PBL)
#define EMAC_DMABUSMOD_RPBL_M 0x007E0000 // RX DMA Programmable Burst Length
// (PBL)
#define EMAC_DMABUSMOD_FB 0x00010000 // Fixed Burst
#define EMAC_DMABUSMOD_PR_M 0x0000C000 // Priority Ratio
#define EMAC_DMABUSMOD_PBL_M 0x00003F00 // Programmable Burst Length
#define EMAC_DMABUSMOD_ATDS 0x00000080 // Alternate Descriptor Size
#define EMAC_DMABUSMOD_DSL_M 0x0000007C // Descriptor Skip Length
#define EMAC_DMABUSMOD_DA 0x00000002 // DMA Arbitration Scheme
#define EMAC_DMABUSMOD_SWR 0x00000001 // DMA Software Reset
#define EMAC_DMABUSMOD_RPBL_S 17
#define EMAC_DMABUSMOD_PR_S 14
#define EMAC_DMABUSMOD_PBL_S 8
#define EMAC_DMABUSMOD_DSL_S 2
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_TXPOLLD register.
//
//*****************************************************************************
#define EMAC_TXPOLLD_TPD_M 0xFFFFFFFF // Transmit Poll Demand
#define EMAC_TXPOLLD_TPD_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_RXPOLLD register.
//
//*****************************************************************************
#define EMAC_RXPOLLD_RPD_M 0xFFFFFFFF // Receive Poll Demand
#define EMAC_RXPOLLD_RPD_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_RXDLADDR
// register.
//
//*****************************************************************************
#define EMAC_RXDLADDR_STRXLIST_M \
0xFFFFFFFC // Start of Receive List
#define EMAC_RXDLADDR_STRXLIST_S \
2
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_TXDLADDR
// register.
//
//*****************************************************************************
#define EMAC_TXDLADDR_TXDLADDR_M \
0xFFFFFFFC // Start of Transmit List Base
// Address
#define EMAC_TXDLADDR_TXDLADDR_S \
2
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_DMARIS register.
//
//*****************************************************************************
#define EMAC_DMARIS_LPI 0x40000000 // LPI Trigger Interrupt Status
#define EMAC_DMARIS_TT 0x20000000 // Timestamp Trigger Interrupt
// Status
#define EMAC_DMARIS_PMT 0x10000000 // MAC PMT Interrupt Status
#define EMAC_DMARIS_MMC 0x08000000 // MAC MMC Interrupt
#define EMAC_DMARIS_AE_M 0x03800000 // Access Error
#define EMAC_DMARIS_AE_RXDMAWD 0x00000000 // Error during RX DMA Write Data
// Transfer
#define EMAC_DMARIS_AE_TXDMARD 0x01800000 // Error during TX DMA Read Data
// Transfer
#define EMAC_DMARIS_AE_RXDMADW 0x02000000 // Error during RX DMA Descriptor
// Write Access
#define EMAC_DMARIS_AE_TXDMADW 0x02800000 // Error during TX DMA Descriptor
// Write Access
#define EMAC_DMARIS_AE_RXDMADR 0x03000000 // Error during RX DMA Descriptor
// Read Access
#define EMAC_DMARIS_AE_TXDMADR 0x03800000 // Error during TX DMA Descriptor
// Read Access
#define EMAC_DMARIS_TS_M 0x00700000 // Transmit Process State
#define EMAC_DMARIS_TS_STOP 0x00000000 // Stopped; Reset or Stop transmit
// command processed
#define EMAC_DMARIS_TS_RUNTXTD 0x00100000 // Running; Fetching transmit
// transfer descriptor
#define EMAC_DMARIS_TS_STATUS 0x00200000 // Running; Waiting for status
#define EMAC_DMARIS_TS_RUNTX 0x00300000 // Running; Reading data from host
// memory buffer and queuing it to
// transmit buffer (TX FIFO)
#define EMAC_DMARIS_TS_TSTAMP 0x00400000 // Writing Timestamp
#define EMAC_DMARIS_TS_SUSPEND 0x00600000 // Suspended; Transmit descriptor
// unavailable or transmit buffer
// underflow
#define EMAC_DMARIS_TS_RUNCTD 0x00700000 // Running; Closing transmit
// descriptor
#define EMAC_DMARIS_RS_M 0x000E0000 // Received Process State
#define EMAC_DMARIS_RS_STOP 0x00000000 // Stopped: Reset or stop receive
// command issued
#define EMAC_DMARIS_RS_RUNRXTD 0x00020000 // Running: Fetching receive
// transfer descriptor
#define EMAC_DMARIS_RS_RUNRXD 0x00060000 // Running: Waiting for receive
// packet
#define EMAC_DMARIS_RS_SUSPEND 0x00080000 // Suspended: Receive descriptor
// unavailable
#define EMAC_DMARIS_RS_RUNCRD 0x000A0000 // Running: Closing receive
// descriptor
#define EMAC_DMARIS_RS_TSWS 0x000C0000 // Writing Timestamp
#define EMAC_DMARIS_RS_RUNTXD 0x000E0000 // Running: Transferring the
// receive packet data from receive
// buffer to host memory
#define EMAC_DMARIS_NIS 0x00010000 // Normal Interrupt Summary
#define EMAC_DMARIS_AIS 0x00008000 // Abnormal Interrupt Summary
#define EMAC_DMARIS_ERI 0x00004000 // Early Receive Interrupt
#define EMAC_DMARIS_FBI 0x00002000 // Fatal Bus Error Interrupt
#define EMAC_DMARIS_ETI 0x00000400 // Early Transmit Interrupt
#define EMAC_DMARIS_RWT 0x00000200 // Receive Watchdog Timeout
#define EMAC_DMARIS_RPS 0x00000100 // Receive Process Stopped
#define EMAC_DMARIS_RU 0x00000080 // Receive Buffer Unavailable
#define EMAC_DMARIS_RI 0x00000040 // Receive Interrupt
#define EMAC_DMARIS_UNF 0x00000020 // Transmit Underflow
#define EMAC_DMARIS_OVF 0x00000010 // Receive Overflow
#define EMAC_DMARIS_TJT 0x00000008 // Transmit Jabber Timeout
#define EMAC_DMARIS_TU 0x00000004 // Transmit Buffer Unavailable
#define EMAC_DMARIS_TPS 0x00000002 // Transmit Process Stopped
#define EMAC_DMARIS_TI 0x00000001 // Transmit Interrupt
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_DMAOPMODE
// register.
//
//*****************************************************************************
#define EMAC_DMAOPMODE_DT 0x04000000 // Disable Dropping of TCP/IP
// Checksum Error Frames
#define EMAC_DMAOPMODE_RSF 0x02000000 // Receive Store and Forward
#define EMAC_DMAOPMODE_DFF 0x01000000 // Disable Flushing of Received
// Frames
#define EMAC_DMAOPMODE_TSF 0x00200000 // Transmit Store and Forward
#define EMAC_DMAOPMODE_FTF 0x00100000 // Flush Transmit FIFO
#define EMAC_DMAOPMODE_TTC_M 0x0001C000 // Transmit Threshold Control
#define EMAC_DMAOPMODE_TTC_64 0x00000000 // 64 bytes
#define EMAC_DMAOPMODE_TTC_128 0x00004000 // 128 bytes
#define EMAC_DMAOPMODE_TTC_192 0x00008000 // 192 bytes
#define EMAC_DMAOPMODE_TTC_256 0x0000C000 // 256 bytes
#define EMAC_DMAOPMODE_TTC_40 0x00010000 // 40 bytes
#define EMAC_DMAOPMODE_TTC_32 0x00014000 // 32 bytes
#define EMAC_DMAOPMODE_TTC_24 0x00018000 // 24 bytes
#define EMAC_DMAOPMODE_TTC_16 0x0001C000 // 16 bytes
#define EMAC_DMAOPMODE_ST 0x00002000 // Start or Stop Transmission
// Command
#define EMAC_DMAOPMODE_FEF 0x00000080 // Forward Error Frames
#define EMAC_DMAOPMODE_FUF 0x00000040 // Forward Undersized Good Frames
#define EMAC_DMAOPMODE_DGF 0x00000020 // Drop Giant Frame Enable
#define EMAC_DMAOPMODE_RTC_M 0x00000018 // Receive Threshold Control
#define EMAC_DMAOPMODE_RTC_64 0x00000000 // 64 bytes
#define EMAC_DMAOPMODE_RTC_32 0x00000008 // 32 bytes
#define EMAC_DMAOPMODE_RTC_96 0x00000010 // 96 bytes
#define EMAC_DMAOPMODE_RTC_128 0x00000018 // 128 bytes
#define EMAC_DMAOPMODE_OSF 0x00000004 // Operate on Second Frame
#define EMAC_DMAOPMODE_SR 0x00000002 // Start or Stop Receive
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_DMAIM register.
//
//*****************************************************************************
#define EMAC_DMAIM_NIE 0x00010000 // Normal Interrupt Summary Enable
#define EMAC_DMAIM_AIE 0x00008000 // Abnormal Interrupt Summary
// Enable
#define EMAC_DMAIM_ERE 0x00004000 // Early Receive Interrupt Enable
#define EMAC_DMAIM_FBE 0x00002000 // Fatal Bus Error Enable
#define EMAC_DMAIM_ETE 0x00000400 // Early Transmit Interrupt Enable
#define EMAC_DMAIM_RWE 0x00000200 // Receive Watchdog Timeout Enable
#define EMAC_DMAIM_RSE 0x00000100 // Receive Stopped Enable
#define EMAC_DMAIM_RUE 0x00000080 // Receive Buffer Unavailable
// Enable
#define EMAC_DMAIM_RIE 0x00000040 // Receive Interrupt Enable
#define EMAC_DMAIM_UNE 0x00000020 // Underflow Interrupt Enable
#define EMAC_DMAIM_OVE 0x00000010 // Overflow Interrupt Enable
#define EMAC_DMAIM_TJE 0x00000008 // Transmit Jabber Timeout Enable
#define EMAC_DMAIM_TUE 0x00000004 // Transmit Buffer Unvailable
// Enable
#define EMAC_DMAIM_TSE 0x00000002 // Transmit Stopped Enable
#define EMAC_DMAIM_TIE 0x00000001 // Transmit Interrupt Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_MFBOC register.
//
//*****************************************************************************
#define EMAC_MFBOC_OVFCNTOVF 0x10000000 // Overflow Bit for FIFO Overflow
// Counter
#define EMAC_MFBOC_OVFFRMCNT_M 0x0FFE0000 // Overflow Frame Counter
#define EMAC_MFBOC_MISCNTOVF 0x00010000 // Overflow bit for Missed Frame
// Counter
#define EMAC_MFBOC_MISFRMCNT_M 0x0000FFFF // Missed Frame Counter
#define EMAC_MFBOC_OVFFRMCNT_S 17
#define EMAC_MFBOC_MISFRMCNT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_RXINTWDT
// register.
//
//*****************************************************************************
#define EMAC_RXINTWDT_RIWT_M 0x000000FF // Receive Interrupt Watchdog Timer
// Count
#define EMAC_RXINTWDT_RIWT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_HOSTXDESC
// register.
//
//*****************************************************************************
#define EMAC_HOSTXDESC_CURTXDESC_M \
0xFFFFFFFF // Host Transmit Descriptor Address
// Pointer
#define EMAC_HOSTXDESC_CURTXDESC_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_HOSRXDESC
// register.
//
//*****************************************************************************
#define EMAC_HOSRXDESC_CURRXDESC_M \
0xFFFFFFFF // Host Receive Descriptor Address
// Pointer
#define EMAC_HOSRXDESC_CURRXDESC_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_HOSTXBA register.
//
//*****************************************************************************
#define EMAC_HOSTXBA_CURTXBUFA_M \
0xFFFFFFFF // Host Transmit Buffer Address
// Pointer
#define EMAC_HOSTXBA_CURTXBUFA_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_HOSRXBA register.
//
//*****************************************************************************
#define EMAC_HOSRXBA_CURRXBUFA_M \
0xFFFFFFFF // Host Receive Buffer Address
// Pointer
#define EMAC_HOSRXBA_CURRXBUFA_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_PP register.
//
//*****************************************************************************
#define EMAC_PP_MACTYPE_M 0x00000700 // Ethernet MAC Type
#define EMAC_PP_MACTYPE_1 0x00000100 // MSP432E4 class MAC
#define EMAC_PP_PHYTYPE_M 0x00000007 // Ethernet PHY Type
#define EMAC_PP_PHYTYPE_NONE 0x00000000 // No PHY
#define EMAC_PP_PHYTYPE_1 0x00000003 // MSP432E4 class PHY
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_PC register.
//
//*****************************************************************************
#define EMAC_PC_PHYEXT 0x80000000 // PHY Select
#define EMAC_PC_PINTFS_M 0x70000000 // Ethernet Interface Select
#define EMAC_PC_PINTFS_IMII 0x00000000 // MII (default) Used for internal
// PHY or external PHY connected
// via MII
#define EMAC_PC_PINTFS_RMII 0x40000000 // RMII: Used for external PHY
// connected via RMII
#define EMAC_PC_DIGRESTART 0x02000000 // PHY Soft Restart
#define EMAC_PC_NIBDETDIS 0x01000000 // Odd Nibble TXER Detection
// Disable
#define EMAC_PC_RXERIDLE 0x00800000 // RXER Detection During Idle
#define EMAC_PC_ISOMIILL 0x00400000 // Isolate MII in Link Loss
#define EMAC_PC_LRR 0x00200000 // Link Loss Recovery
#define EMAC_PC_TDRRUN 0x00100000 // TDR Auto Run
#define EMAC_PC_FASTLDMODE_M 0x000F8000 // Fast Link Down Mode
#define EMAC_PC_POLSWAP 0x00004000 // Polarity Swap
#define EMAC_PC_MDISWAP 0x00002000 // MDI Swap
#define EMAC_PC_RBSTMDIX 0x00001000 // Robust Auto MDI-X
#define EMAC_PC_FASTMDIX 0x00000800 // Fast Auto MDI-X
#define EMAC_PC_MDIXEN 0x00000400 // MDIX Enable
#define EMAC_PC_FASTRXDV 0x00000200 // Fast RXDV Detection
#define EMAC_PC_FASTLUPD 0x00000100 // FAST Link-Up in Parallel Detect
#define EMAC_PC_EXTFD 0x00000080 // Extended Full Duplex Ability
#define EMAC_PC_FASTANEN 0x00000040 // Fast Auto Negotiation Enable
#define EMAC_PC_FASTANSEL_M 0x00000030 // Fast Auto Negotiation Select
#define EMAC_PC_ANEN 0x00000008 // Auto Negotiation Enable
#define EMAC_PC_ANMODE_M 0x00000006 // Auto Negotiation Mode
#define EMAC_PC_ANMODE_10HD 0x00000000 // When ANEN = 0x0, the mode is
// 10Base-T, Half-Duplex
#define EMAC_PC_ANMODE_10FD 0x00000002 // When ANEN = 0x0, the mode is
// 10Base-T, Full-Duplex
#define EMAC_PC_ANMODE_100HD 0x00000004 // When ANEN = 0x0, the mode is
// 100Base-TX, Half-Duplex
#define EMAC_PC_ANMODE_100FD 0x00000006 // When ANEN = 0x0, the mode is
// 100Base-TX, Full-Duplex
#define EMAC_PC_PHYHOLD 0x00000001 // Ethernet PHY Hold
#define EMAC_PC_FASTLDMODE_S 15
#define EMAC_PC_FASTANSEL_S 4
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_CC register.
//
//*****************************************************************************
#define EMAC_CC_PTPCEN 0x00040000 // PTP Clock Reference Enable
#define EMAC_CC_POL 0x00020000 // LED Polarity Control
#define EMAC_CC_CLKEN 0x00010000 // EN0RREF_CLK Signal Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_EPHYRIS register.
//
//*****************************************************************************
#define EMAC_EPHYRIS_INT 0x00000001 // Ethernet PHY Raw Interrupt
// Status
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_EPHYIM register.
//
//*****************************************************************************
#define EMAC_EPHYIM_INT 0x00000001 // Ethernet PHY Interrupt Mask
//*****************************************************************************
//
// The following are defines for the bit fields in the EMAC_O_EPHYMISC
// register.
//
//*****************************************************************************
#define EMAC_EPHYMISC_INT 0x00000001 // Ethernet PHY Status and Clear
// register
//*****************************************************************************
//
// The following are defines for the EPHY register offsets.
//
//*****************************************************************************
#define EPHY_BMCR 0x00000000 // Ethernet PHY Basic Mode Control
#define EPHY_BMSR 0x00000001 // Ethernet PHY Basic Mode Status
#define EPHY_ID1 0x00000002 // Ethernet PHY Identifier Register
// 1
#define EPHY_ID2 0x00000003 // Ethernet PHY Identifier Register
// 2
#define EPHY_ANA 0x00000004 // Ethernet PHY Auto-Negotiation
// Advertisement
#define EPHY_ANLPA 0x00000005 // Ethernet PHY Auto-Negotiation
// Link Partner Ability
#define EPHY_ANER 0x00000006 // Ethernet PHY Auto-Negotiation
// Expansion
#define EPHY_ANNPTR 0x00000007 // Ethernet PHY Auto-Negotiation
// Next Page TX
#define EPHY_ANLNPTR 0x00000008 // Ethernet PHY Auto-Negotiation
// Link Partner Ability Next Page
#define EPHY_CFG1 0x00000009 // Ethernet PHY Configuration 1
#define EPHY_CFG2 0x0000000A // Ethernet PHY Configuration 2
#define EPHY_CFG3 0x0000000B // Ethernet PHY Configuration 3
#define EPHY_REGCTL 0x0000000D // Ethernet PHY Register Control
#define EPHY_ADDAR 0x0000000E // Ethernet PHY Address or Data
#define EPHY_STS 0x00000010 // Ethernet PHY Status
#define EPHY_SCR 0x00000011 // Ethernet PHY Specific Control
#define EPHY_MISR1 0x00000012 // Ethernet PHY MII Interrupt
// Status 1
#define EPHY_MISR2 0x00000013 // Ethernet PHY MII Interrupt
// Status 2
#define EPHY_FCSCR 0x00000014 // Ethernet PHY False Carrier Sense
// Counter
#define EPHY_RXERCNT 0x00000015 // Ethernet PHY Receive Error Count
#define EPHY_BISTCR 0x00000016 // Ethernet PHY BIST Control
#define EPHY_LEDCR 0x00000018 // Ethernet PHY LED Control
#define EPHY_CTL 0x00000019 // Ethernet PHY Control
#define EPHY_10BTSC 0x0000001A // Ethernet PHY 10Base-T
// Status/Control - MR26
#define EPHY_BICSR1 0x0000001B // Ethernet PHY BIST Control and
// Status 1
#define EPHY_BICSR2 0x0000001C // Ethernet PHY BIST Control and
// Status 2
#define EPHY_CDCR 0x0000001E // Ethernet PHY Cable Diagnostic
// Control
#define EPHY_RCR 0x0000001F // Ethernet PHY Reset Control
#define EPHY_LEDCFG 0x00000025 // Ethernet PHY LED Configuration
//*****************************************************************************
//
// The following are defines for the bit fields in the EPHY_BMCR register.
//
//*****************************************************************************
#define EPHY_BMCR_MIIRESET 0x00008000 // MII Register reset
#define EPHY_BMCR_MIILOOPBK 0x00004000 // MII Loopback
#define EPHY_BMCR_SPEED 0x00002000 // Speed Select
#define EPHY_BMCR_ANEN 0x00001000 // Auto-Negotiate Enable
#define EPHY_BMCR_PWRDWN 0x00000800 // Power Down
#define EPHY_BMCR_ISOLATE 0x00000400 // Port Isolate
#define EPHY_BMCR_RESTARTAN 0x00000200 // Restart Auto-Negotiation
#define EPHY_BMCR_DUPLEXM 0x00000100 // Duplex Mode
#define EPHY_BMCR_COLLTST 0x00000080 // Collision Test
//*****************************************************************************
//
// The following are defines for the bit fields in the EPHY_BMSR register.
//
//*****************************************************************************
#define EPHY_BMSR_100BTXFD 0x00004000 // 100Base-TX Full Duplex Capable
#define EPHY_BMSR_100BTXHD 0x00002000 // 100Base-TX Half Duplex Capable
#define EPHY_BMSR_10BTFD 0x00001000 // 10 Base-T Full Duplex Capable
#define EPHY_BMSR_10BTHD 0x00000800 // 10 Base-T Half Duplex Capable
#define EPHY_BMSR_MFPRESUP 0x00000040 // Preamble Suppression Capable
#define EPHY_BMSR_ANC 0x00000020 // Auto-Negotiation Complete
#define EPHY_BMSR_RFAULT 0x00000010 // Remote Fault
#define EPHY_BMSR_ANEN 0x00000008 // Auto Negotiation Enabled
#define EPHY_BMSR_LINKSTAT 0x00000004 // Link Status
#define EPHY_BMSR_JABBER 0x00000002 // Jabber Detect
#define EPHY_BMSR_EXTEN 0x00000001 // Extended Capability Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the EPHY_ID1 register.
//
//*****************************************************************************
#define EPHY_ID1_OUIMSB_M 0x0000FFFF // OUI Most Significant Bits
#define EPHY_ID1_OUIMSB_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EPHY_ID2 register.
//
//*****************************************************************************
#define EPHY_ID2_OUILSB_M 0x0000FC00 // OUI Least Significant Bits
#define EPHY_ID2_VNDRMDL_M 0x000003F0 // Vendor Model Number
#define EPHY_ID2_MDLREV_M 0x0000000F // Model Revision Number
#define EPHY_ID2_OUILSB_S 10
#define EPHY_ID2_VNDRMDL_S 4
#define EPHY_ID2_MDLREV_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EPHY_ANA register.
//
//*****************************************************************************
#define EPHY_ANA_NP 0x00008000 // Next Page Indication
#define EPHY_ANA_RF 0x00002000 // Remote Fault
#define EPHY_ANA_ASMDUP 0x00000800 // Asymmetric PAUSE support for
// Full Duplex Links
#define EPHY_ANA_PAUSE 0x00000400 // PAUSE Support for Full Duplex
// Links
#define EPHY_ANA_100BT4 0x00000200 // 100Base-T4 Support
#define EPHY_ANA_100BTXFD 0x00000100 // 100Base-TX Full Duplex Support
#define EPHY_ANA_100BTX 0x00000080 // 100Base-TX Support
#define EPHY_ANA_10BTFD 0x00000040 // 10Base-T Full Duplex Support
#define EPHY_ANA_10BT 0x00000020 // 10Base-T Support
#define EPHY_ANA_SELECT_M 0x0000001F // Protocol Selection
#define EPHY_ANA_SELECT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EPHY_ANLPA register.
//
//*****************************************************************************
#define EPHY_ANLPA_NP 0x00008000 // Next Page Indication
#define EPHY_ANLPA_ACK 0x00004000 // Acknowledge
#define EPHY_ANLPA_RF 0x00002000 // Remote Fault
#define EPHY_ANLPA_ASMDUP 0x00000800 // Asymmetric PAUSE
#define EPHY_ANLPA_PAUSE 0x00000400 // PAUSE
#define EPHY_ANLPA_100BT4 0x00000200 // 100Base-T4 Support
#define EPHY_ANLPA_100BTXFD 0x00000100 // 100Base-TX Full Duplex Support
#define EPHY_ANLPA_100BTX 0x00000080 // 100Base-TX Support
#define EPHY_ANLPA_10BTFD 0x00000040 // 10Base-T Full Duplex Support
#define EPHY_ANLPA_10BT 0x00000020 // 10Base-T Support
#define EPHY_ANLPA_SELECT_M 0x0000001F // Protocol Selection
#define EPHY_ANLPA_SELECT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EPHY_ANER register.
//
//*****************************************************************************
#define EPHY_ANER_PDF 0x00000010 // Parallel Detection Fault
#define EPHY_ANER_LPNPABLE 0x00000008 // Link Partner Next Page Able
#define EPHY_ANER_NPABLE 0x00000004 // Next Page Able
#define EPHY_ANER_PAGERX 0x00000002 // Link Code Word Page Received
#define EPHY_ANER_LPANABLE 0x00000001 // Link Partner Auto-Negotiation
// Able
//*****************************************************************************
//
// The following are defines for the bit fields in the EPHY_ANNPTR register.
//
//*****************************************************************************
#define EPHY_ANNPTR_NP 0x00008000 // Next Page Indication
#define EPHY_ANNPTR_MP 0x00002000 // Message Page
#define EPHY_ANNPTR_ACK2 0x00001000 // Acknowledge 2
#define EPHY_ANNPTR_TOGTX 0x00000800 // Toggle
#define EPHY_ANNPTR_CODE_M 0x000007FF // Code
#define EPHY_ANNPTR_CODE_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EPHY_ANLNPTR register.
//
//*****************************************************************************
#define EPHY_ANLNPTR_NP 0x00008000 // Next Page Indication
#define EPHY_ANLNPTR_ACK 0x00004000 // Acknowledge
#define EPHY_ANLNPTR_MP 0x00002000 // Message Page
#define EPHY_ANLNPTR_ACK2 0x00001000 // Acknowledge 2
#define EPHY_ANLNPTR_TOG 0x00000800 // Toggle
#define EPHY_ANLNPTR_CODE_M 0x000007FF // Code
#define EPHY_ANLNPTR_CODE_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EPHY_CFG1 register.
//
//*****************************************************************************
#define EPHY_CFG1_DONE 0x00008000 // Configuration Done
#define EPHY_CFG1_TDRAR 0x00000100 // TDR Auto-Run at Link Down
#define EPHY_CFG1_LLR 0x00000080 // Link Loss Recovery
#define EPHY_CFG1_FAMDIX 0x00000040 // Fast Auto MDI/MDIX
#define EPHY_CFG1_RAMDIX 0x00000020 // Robust Auto MDI/MDIX
#define EPHY_CFG1_FASTANEN 0x00000010 // Fast Auto Negotiation Enable
#define EPHY_CFG1_FANSEL_M 0x0000000C // Fast Auto-Negotiation Select
// Configuration
#define EPHY_CFG1_FANSEL_BLT80 0x00000000 // Break Link Timer: 80 ms
#define EPHY_CFG1_FANSEL_BLT120 0x00000004 // Break Link Timer: 120 ms
#define EPHY_CFG1_FANSEL_BLT240 0x00000008 // Break Link Timer: 240 ms
#define EPHY_CFG1_FRXDVDET 0x00000002 // FAST RXDV Detection
//*****************************************************************************
//
// The following are defines for the bit fields in the EPHY_CFG2 register.
//
//*****************************************************************************
#define EPHY_CFG2_FLUPPD 0x00000040 // Fast Link-Up in Parallel Detect
// Mode
#define EPHY_CFG2_EXTFD 0x00000020 // Extended Full-Duplex Ability
#define EPHY_CFG2_ENLEDLINK 0x00000010 // Enhanced LED Functionality
#define EPHY_CFG2_ISOMIILL 0x00000008 // Isolate MII outputs when
// Enhanced Link is not Achievable
#define EPHY_CFG2_RXERRIDLE 0x00000004 // Detection of Receive Symbol
// Error During IDLE State
#define EPHY_CFG2_ODDNDETDIS 0x00000002 // Detection of Transmit Error
//*****************************************************************************
//
// The following are defines for the bit fields in the EPHY_CFG3 register.
//
//*****************************************************************************
#define EPHY_CFG3_POLSWAP 0x00000080 // Polarity Swap
#define EPHY_CFG3_MDIMDIXS 0x00000040 // MDI/MDIX Swap
#define EPHY_CFG3_FLDWNM_M 0x0000001F // Fast Link Down Modes
#define EPHY_CFG3_FLDWNM_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EPHY_REGCTL register.
//
//*****************************************************************************
#define EPHY_REGCTL_FUNC_M 0x0000C000 // Function
#define EPHY_REGCTL_FUNC_ADDR 0x00000000 // Address
#define EPHY_REGCTL_FUNC_DATANI 0x00004000 // Data, no post increment
#define EPHY_REGCTL_FUNC_DATAPIRW \
0x00008000 // Data, post increment on read and
// write
#define EPHY_REGCTL_FUNC_DATAPIWO \
0x0000C000 // Data, post increment on write
// only
#define EPHY_REGCTL_DEVAD_M 0x0000001F // Device Address
#define EPHY_REGCTL_DEVAD_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EPHY_ADDAR register.
//
//*****************************************************************************
#define EPHY_ADDAR_ADDRDATA_M 0x0000FFFF // Address or Data
#define EPHY_ADDAR_ADDRDATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EPHY_STS register.
//
//*****************************************************************************
#define EPHY_STS_MDIXM 0x00004000 // MDI-X Mode
#define EPHY_STS_RXLERR 0x00002000 // Receive Error Latch
#define EPHY_STS_POLSTAT 0x00001000 // Polarity Status
#define EPHY_STS_FCSL 0x00000800 // False Carrier Sense Latch
#define EPHY_STS_SD 0x00000400 // Signal Detect
#define EPHY_STS_DL 0x00000200 // Descrambler Lock
#define EPHY_STS_PAGERX 0x00000100 // Link Code Page Received
#define EPHY_STS_MIIREQ 0x00000080 // MII Interrupt Pending
#define EPHY_STS_RF 0x00000040 // Remote Fault
#define EPHY_STS_JD 0x00000020 // Jabber Detect
#define EPHY_STS_ANS 0x00000010 // Auto-Negotiation Status
#define EPHY_STS_MIILB 0x00000008 // MII Loopback Status
#define EPHY_STS_DUPLEX 0x00000004 // Duplex Status
#define EPHY_STS_SPEED 0x00000002 // Speed Status
#define EPHY_STS_LINK 0x00000001 // Link Status
//*****************************************************************************
//
// The following are defines for the bit fields in the EPHY_SCR register.
//
//*****************************************************************************
#define EPHY_SCR_DISCLK 0x00008000 // Disable CLK
#define EPHY_SCR_PSEN 0x00004000 // Power Saving Modes Enable
#define EPHY_SCR_PSMODE_M 0x00003000 // Power Saving Modes
#define EPHY_SCR_PSMODE_NORMAL 0x00000000 // Normal: Normal operation mode.
// PHY is fully functional
#define EPHY_SCR_PSMODE_LOWPWR 0x00001000 // IEEE Power Down
#define EPHY_SCR_PSMODE_ACTWOL 0x00002000 // Active Sleep
#define EPHY_SCR_PSMODE_PASWOL 0x00003000 // Passive Sleep
#define EPHY_SCR_SBPYASS 0x00000800 // Scrambler Bypass
#define EPHY_SCR_LBFIFO_M 0x00000300 // Loopback FIFO Depth
#define EPHY_SCR_LBFIFO_4 0x00000000 // Four nibble FIFO
#define EPHY_SCR_LBFIFO_5 0x00000100 // Five nibble FIFO
#define EPHY_SCR_LBFIFO_6 0x00000200 // Six nibble FIFO
#define EPHY_SCR_LBFIFO_8 0x00000300 // Eight nibble FIFO
#define EPHY_SCR_COLFDM 0x00000010 // Collision in Full-Duplex Mode
#define EPHY_SCR_TINT 0x00000004 // Test Interrupt
#define EPHY_SCR_INTEN 0x00000002 // Interrupt Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the EPHY_MISR1 register.
//
//*****************************************************************************
#define EPHY_MISR1_LINKSTAT 0x00002000 // Change of Link Status Interrupt
#define EPHY_MISR1_SPEED 0x00001000 // Change of Speed Status Interrupt
#define EPHY_MISR1_DUPLEXM 0x00000800 // Change of Duplex Status
// Interrupt
#define EPHY_MISR1_ANC 0x00000400 // Auto-Negotiation Complete
// Interrupt
#define EPHY_MISR1_FCHF 0x00000200 // False Carrier Counter Half-Full
// Interrupt
#define EPHY_MISR1_RXHF 0x00000100 // Receive Error Counter Half-Full
// Interrupt
#define EPHY_MISR1_LINKSTATEN 0x00000020 // Link Status Interrupt Enable
#define EPHY_MISR1_SPEEDEN 0x00000010 // Speed Change Interrupt Enable
#define EPHY_MISR1_DUPLEXMEN 0x00000008 // Duplex Status Interrupt Enable
#define EPHY_MISR1_ANCEN 0x00000004 // Auto-Negotiation Complete
// Interrupt Enable
#define EPHY_MISR1_FCHFEN 0x00000002 // False Carrier Counter Register
// half-full Interrupt Enable
#define EPHY_MISR1_RXHFEN 0x00000001 // Receive Error Counter Register
// Half-Full Event Interrupt
//*****************************************************************************
//
// The following are defines for the bit fields in the EPHY_MISR2 register.
//
//*****************************************************************************
#define EPHY_MISR2_ANERR 0x00004000 // Auto-Negotiation Error Interrupt
#define EPHY_MISR2_PAGERX 0x00002000 // Page Receive Interrupt
#define EPHY_MISR2_LBFIFO 0x00001000 // Loopback FIFO Overflow/Underflow
// Event Interrupt
#define EPHY_MISR2_MDICO 0x00000800 // MDI/MDIX Crossover Status
// Changed Interrupt
#define EPHY_MISR2_SLEEP 0x00000400 // Sleep Mode Event Interrupt
#define EPHY_MISR2_POLINT 0x00000200 // Polarity Changed Interrupt
#define EPHY_MISR2_JABBER 0x00000100 // Jabber Detect Event Interrupt
#define EPHY_MISR2_ANERREN 0x00000040 // Auto-Negotiation Error Interrupt
// Enable
#define EPHY_MISR2_PAGERXEN 0x00000020 // Page Receive Interrupt Enable
#define EPHY_MISR2_LBFIFOEN 0x00000010 // Loopback FIFO Overflow/Underflow
// Interrupt Enable
#define EPHY_MISR2_MDICOEN 0x00000008 // MDI/MDIX Crossover Status
// Changed Interrupt Enable
#define EPHY_MISR2_SLEEPEN 0x00000004 // Sleep Mode Event Interrupt
// Enable
#define EPHY_MISR2_POLINTEN 0x00000002 // Polarity Changed Interrupt
// Enable
#define EPHY_MISR2_JABBEREN 0x00000001 // Jabber Detect Event Interrupt
// Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the EPHY_FCSCR register.
//
//*****************************************************************************
#define EPHY_FCSCR_FCSCNT_M 0x000000FF // False Carrier Event Counter
#define EPHY_FCSCR_FCSCNT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EPHY_RXERCNT register.
//
//*****************************************************************************
#define EPHY_RXERCNT_RXERRCNT_M 0x0000FFFF // Receive Error Count
#define EPHY_RXERCNT_RXERRCNT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EPHY_BISTCR register.
//
//*****************************************************************************
#define EPHY_BISTCR_PRBSM 0x00004000 // PRBS Single/Continuous Mode
#define EPHY_BISTCR_PRBSPKT 0x00002000 // Generated PRBS Packets
#define EPHY_BISTCR_PKTEN 0x00001000 // Packet Generation Enable
#define EPHY_BISTCR_PRBSCHKLK 0x00000800 // PRBS Checker Lock Indication
#define EPHY_BISTCR_PRBSCHKSYNC 0x00000400 // PRBS Checker Lock Sync Loss
// Indication
#define EPHY_BISTCR_PKTGENSTAT 0x00000200 // Packet Generator Status
// Indication
#define EPHY_BISTCR_PWRMODE 0x00000100 // Power Mode Indication
#define EPHY_BISTCR_TXMIILB 0x00000040 // Transmit Data in MII Loopback
// Mode
#define EPHY_BISTCR_LBMODE_M 0x0000001F // Loopback Mode Select
#define EPHY_BISTCR_LBMODE_NPCSIN \
0x00000001 // Near-end loopback: PCS Input
// Loopback
#define EPHY_BISTCR_LBMODE_NPCSOUT \
0x00000002 // Near-end loopback: PCS Output
// Loopback (In 100Base-TX only)
#define EPHY_BISTCR_LBMODE_NDIG 0x00000004 // Near-end loopback: Digital
// Loopback
#define EPHY_BISTCR_LBMODE_NANA 0x00000008 // Near-end loopback: Analog
// Loopback (requires 100 Ohm
// termination)
#define EPHY_BISTCR_LBMODE_FREV 0x00000010 // Far-end Loopback: Reverse
// Loopback
//*****************************************************************************
//
// The following are defines for the bit fields in the EPHY_LEDCR register.
//
//*****************************************************************************
#define EPHY_LEDCR_BLINKRATE_M 0x00000600 // LED Blinking Rate (ON/OFF
// duration):
#define EPHY_LEDCR_BLINKRATE_20HZ \
0x00000000 // 20 Hz (50 ms)
#define EPHY_LEDCR_BLINKRATE_10HZ \
0x00000200 // 10 Hz (100 ms)
#define EPHY_LEDCR_BLINKRATE_5HZ \
0x00000400 // 5 Hz (200 ms)
#define EPHY_LEDCR_BLINKRATE_2HZ \
0x00000600 // 2 Hz (500 ms)
//*****************************************************************************
//
// The following are defines for the bit fields in the EPHY_CTL register.
//
//*****************************************************************************
#define EPHY_CTL_AUTOMDI 0x00008000 // Auto-MDIX Enable
#define EPHY_CTL_FORCEMDI 0x00004000 // Force MDIX
#define EPHY_CTL_PAUSERX 0x00002000 // Pause Receive Negotiated Status
#define EPHY_CTL_PAUSETX 0x00001000 // Pause Transmit Negotiated Status
#define EPHY_CTL_MIILNKSTAT 0x00000800 // MII Link Status
#define EPHY_CTL_BYPLEDSTRCH 0x00000080 // Bypass LED Stretching
//*****************************************************************************
//
// The following are defines for the bit fields in the EPHY_10BTSC register.
//
//*****************************************************************************
#define EPHY_10BTSC_RXTHEN 0x00002000 // Lower Receiver Threshold Enable
#define EPHY_10BTSC_SQUELCH_M 0x00001E00 // Squelch Configuration
#define EPHY_10BTSC_NLPDIS 0x00000080 // Normal Link Pulse (NLP)
// Transmission Control
#define EPHY_10BTSC_POLSTAT 0x00000010 // 10 Mb Polarity Status
#define EPHY_10BTSC_JABBERD 0x00000001 // Jabber Disable
#define EPHY_10BTSC_SQUELCH_S 9
//*****************************************************************************
//
// The following are defines for the bit fields in the EPHY_BICSR1 register.
//
//*****************************************************************************
#define EPHY_BICSR1_ERRCNT_M 0x0000FF00 // BIST Error Count
#define EPHY_BICSR1_IPGLENGTH_M 0x000000FF // BIST IPG Length
#define EPHY_BICSR1_ERRCNT_S 8
#define EPHY_BICSR1_IPGLENGTH_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EPHY_BICSR2 register.
//
//*****************************************************************************
#define EPHY_BICSR2_PKTLENGTH_M 0x000007FF // BIST Packet Length
#define EPHY_BICSR2_PKTLENGTH_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EPHY_CDCR register.
//
//*****************************************************************************
#define EPHY_CDCR_START 0x00008000 // Cable Diagnostic Process Start
#define EPHY_CDCR_LINKQUAL_M 0x00000300 // Link Quality Indication
#define EPHY_CDCR_LINKQUAL_GOOD 0x00000100 // Good Quality Link Indication
#define EPHY_CDCR_LINKQUAL_MILD 0x00000200 // Mid- Quality Link Indication
#define EPHY_CDCR_LINKQUAL_POOR 0x00000300 // Poor Quality Link Indication
#define EPHY_CDCR_DONE 0x00000002 // Cable Diagnostic Process Done
#define EPHY_CDCR_FAIL 0x00000001 // Cable Diagnostic Process Fail
//*****************************************************************************
//
// The following are defines for the bit fields in the EPHY_RCR register.
//
//*****************************************************************************
#define EPHY_RCR_SWRST 0x00008000 // Software Reset
#define EPHY_RCR_SWRESTART 0x00004000 // Software Restart
//*****************************************************************************
//
// The following are defines for the bit fields in the EPHY_LEDCFG register.
//
//*****************************************************************************
#define EPHY_LEDCFG_LED2_M 0x00000F00 // LED2 Configuration
#define EPHY_LEDCFG_LED2_LINK 0x00000000 // Link OK
#define EPHY_LEDCFG_LED2_RXTX 0x00000100 // RX/TX Activity
#define EPHY_LEDCFG_LED2_TX 0x00000200 // TX Activity
#define EPHY_LEDCFG_LED2_RX 0x00000300 // RX Activity
#define EPHY_LEDCFG_LED2_COL 0x00000400 // Collision
#define EPHY_LEDCFG_LED2_100BT 0x00000500 // 100-Base TX
#define EPHY_LEDCFG_LED2_10BT 0x00000600 // 10-Base TX
#define EPHY_LEDCFG_LED2_FD 0x00000700 // Full Duplex
#define EPHY_LEDCFG_LED2_LINKTXRX \
0x00000800 // Link OK/Blink on TX/RX Activity
#define EPHY_LEDCFG_LED1_M 0x000000F0 // LED1 Configuration
#define EPHY_LEDCFG_LED1_LINK 0x00000000 // Link OK
#define EPHY_LEDCFG_LED1_RXTX 0x00000010 // RX/TX Activity
#define EPHY_LEDCFG_LED1_TX 0x00000020 // TX Activity
#define EPHY_LEDCFG_LED1_RX 0x00000030 // RX Activity
#define EPHY_LEDCFG_LED1_COL 0x00000040 // Collision
#define EPHY_LEDCFG_LED1_100BT 0x00000050 // 100-Base TX
#define EPHY_LEDCFG_LED1_10BT 0x00000060 // 10-Base TX
#define EPHY_LEDCFG_LED1_FD 0x00000070 // Full Duplex
#define EPHY_LEDCFG_LED1_LINKTXRX \
0x00000080 // Link OK/Blink on TX/RX Activity
#define EPHY_LEDCFG_LED0_M 0x0000000F // LED0 Configuration
#define EPHY_LEDCFG_LED0_LINK 0x00000000 // Link OK
#define EPHY_LEDCFG_LED0_RXTX 0x00000001 // RX/TX Activity
#define EPHY_LEDCFG_LED0_TX 0x00000002 // TX Activity
#define EPHY_LEDCFG_LED0_RX 0x00000003 // RX Activity
#define EPHY_LEDCFG_LED0_COL 0x00000004 // Collision
#define EPHY_LEDCFG_LED0_100BT 0x00000005 // 100-Base TX
#define EPHY_LEDCFG_LED0_10BT 0x00000006 // 10-Base TX
#define EPHY_LEDCFG_LED0_FD 0x00000007 // Full Duplex
#define EPHY_LEDCFG_LED0_LINKTXRX \
0x00000008 // Link OK/Blink on TX/RX Activity
/** @} */ /* End of group Device_Peripheral_Bitfields */
#ifdef __cplusplus
}
#endif
#endif /* __MSP432E411Y_H__ */
View Git Blame Copy Permalink