mirror of
https://github.com/RT-Thread/rt-thread.git
synced 2025-02-26 09:57:06 +08:00
372 lines
17 KiB
C
372 lines
17 KiB
C
/**
|
|
******************************************************************************
|
|
* @file hk32f0xx_syscfg.c
|
|
* @version V1.0.1
|
|
* @date 2019-08-15
|
|
===============================================================================
|
|
##### How to use this driver #####
|
|
===============================================================================
|
|
[..]
|
|
The SYSCFG registers can be accessed only when the SYSCFG
|
|
interface APB clock is enabled.
|
|
To enable SYSCFG APB clock use:
|
|
RCC_APBPeriphClockCmd(RCC_APBPeriph_SYSCFG, ENABLE).
|
|
* @endverbatim
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "hk32f0xx_syscfg.h"
|
|
|
|
/** @addtogroup HK32F0xx_StdPeriph_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup SYSCFG
|
|
* @brief SYSCFG driver modules
|
|
* @{
|
|
*/
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* Private define ------------------------------------------------------------*/
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
/* Private functions ---------------------------------------------------------*/
|
|
|
|
/** @defgroup SYSCFG_Private_Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup SYSCFG_Group1 SYSCFG Initialization and Configuration functions
|
|
* @brief SYSCFG Initialization and Configuration functions
|
|
*
|
|
@verbatim
|
|
===============================================================================
|
|
##### SYSCFG Initialization and Configuration functions #####
|
|
===============================================================================
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Deinitializes the SYSCFG registers to their default reset values.
|
|
* @param None
|
|
* @retval None
|
|
* @note MEM_MODE bits are not affected by APB reset.
|
|
* @note MEM_MODE bits took the value from the user option bytes.
|
|
* @note CFGR2 register is not affected by APB reset.
|
|
* @note CLABBB configuration bits are locked when set.
|
|
* @note To unlock the configuration, perform a system reset.
|
|
*/
|
|
void SYSCFG_DeInit(void)
|
|
{
|
|
/* Set SYSCFG_CFGR1 register to reset value without affecting MEM_MODE bits */
|
|
SYSCFG->CFGR1 &= SYSCFG_CFGR1_MEM_MODE;
|
|
/* Set EXTICRx registers to reset value */
|
|
SYSCFG->EXTICR[0] = 0;
|
|
SYSCFG->EXTICR[1] = 0;
|
|
SYSCFG->EXTICR[2] = 0;
|
|
SYSCFG->EXTICR[3] = 0;
|
|
/* Set CFGR2 register to reset value: clear SRAM parity error flag */
|
|
SYSCFG->CFGR2 |= (uint32_t) SYSCFG_CFGR2_SRAM_PE;
|
|
}
|
|
|
|
/**
|
|
* @brief Configures the memory mapping at address 0x00000000.
|
|
* @param SYSCFG_MemoryRemap: selects the memory remapping.
|
|
* This parameter can be one of the following values:
|
|
* @arg SYSCFG_MemoryRemap_Flash: Main Flash memory mapped at 0x00000000
|
|
* @arg SYSCFG_MemoryRemap_SystemMemory: System Flash memory mapped at 0x00000000
|
|
* @arg SYSCFG_MemoryRemap_SRAM: Embedded SRAM mapped at 0x00000000
|
|
* @retval None
|
|
*/
|
|
void SYSCFG_MemoryRemapConfig(uint32_t SYSCFG_MemoryRemap)
|
|
{
|
|
uint32_t tmpctrl = 0;
|
|
|
|
/* Check the parameter */
|
|
assert_param(IS_SYSCFG_MEMORY_REMAP(SYSCFG_MemoryRemap));
|
|
|
|
/* Get CFGR1 register value */
|
|
tmpctrl = SYSCFG->CFGR1;
|
|
|
|
/* Clear MEM_MODE bits */
|
|
tmpctrl &= (uint32_t)(~SYSCFG_CFGR1_MEM_MODE);
|
|
|
|
/* Set the new MEM_MODE bits value */
|
|
tmpctrl |= (uint32_t) SYSCFG_MemoryRemap;
|
|
|
|
/* Set CFGR1 register with the new memory remap configuration */
|
|
SYSCFG->CFGR1 = tmpctrl;
|
|
}
|
|
|
|
/**
|
|
* @brief Configure the DMA channels remapping.
|
|
* @param SYSCFG_DMARemap: selects the DMA channels remap.
|
|
* This parameter can be one of the following values:
|
|
* @arg SYSCFG_DMARemap_TIM17: Remap TIM17 DMA requests from channel1 to channel2
|
|
* @arg SYSCFG_DMARemap_TIM16: Remap TIM16 DMA requests from channel3 to channel4
|
|
* @arg SYSCFG_DMARemap_USART1Rx: Remap USART1 Rx DMA requests from channel3 to channel5
|
|
* @arg SYSCFG_DMARemap_USART1Tx: Remap USART1 Tx DMA requests from channel2 to channel4
|
|
* @arg SYSCFG_DMARemap_ADC1: Remap ADC1 DMA requests from channel1 to channel2
|
|
* @param NewState: new state of the DMA channel remapping.
|
|
* This parameter can be: ENABLE or DISABLE.
|
|
* @note When enabled, DMA channel of the selected peripheral is remapped
|
|
* @note When disabled, Default DMA channel is mapped to the selected peripheral
|
|
* @note By default TIM17 DMA requests is mapped to channel 1,
|
|
* use SYSCFG_DMAChannelRemapConfig(SYSCFG_DMARemap_TIM17, Enable) to remap
|
|
* TIM17 DMA requests to channel 2 and use
|
|
* SYSCFG_DMAChannelRemapConfig(SYSCFG_DMARemap_TIM17, Disable) to map
|
|
* TIM17 DMA requests to channel 1 (default mapping)
|
|
* @note This function is only used for HK32F030, HK32F031, devices.
|
|
* @retval None
|
|
*/
|
|
void SYSCFG_DMAChannelRemapConfig(uint32_t SYSCFG_DMARemap, FunctionalState NewState)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_SYSCFG_DMA_REMAP(SYSCFG_DMARemap));
|
|
assert_param(IS_FUNCTIONAL_STATE(NewState));
|
|
|
|
if (NewState != DISABLE)
|
|
{
|
|
/* Remap the DMA channel */
|
|
SYSCFG->CFGR1 |= (uint32_t)SYSCFG_DMARemap;
|
|
}
|
|
else
|
|
{
|
|
/* use the default DMA channel mapping */
|
|
SYSCFG->CFGR1 &= (uint32_t)(~SYSCFG_DMARemap);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Configure the I2C fast mode plus driving capability.
|
|
* @param SYSCFG_I2CFastModePlus: selects the pin.
|
|
* This parameter can be one of the following values:
|
|
* @arg SYSCFG_I2CFastModePlus_PB6: Configure fast mode plus driving capability for PB6
|
|
* @arg SYSCFG_I2CFastModePlus_PB7: Configure fast mode plus driving capability for PB7
|
|
* @arg SYSCFG_I2CFastModePlus_PB8: Configure fast mode plus driving capability for PB8
|
|
* @arg SYSCFG_I2CFastModePlus_PB9: Configure fast mode plus driving capability for PB9
|
|
* @arg SYSCFG_I2CFastModePlus_PA9: Configure fast mode plus driving capability for PA9
|
|
* @arg SYSCFG_I2CFastModePlus_PA10: Configure fast mode plus driving capability for PA10
|
|
* @arg SYSCFG_I2CFastModePlus_I2C1: Configure fast mode plus driving capability for I2C_Pxx_FM bits
|
|
*
|
|
* @param NewState: new state of the DMA channel remapping.
|
|
* This parameter can be: ENABLE or DISABLE.
|
|
* @note ENABLE: Enable fast mode plus driving capability for selected I2C pin
|
|
* @note DISABLE: Disable fast mode plus driving capability for selected I2C pin
|
|
* @note For I2C1, fast mode plus driving capability can be enabled on all selected
|
|
* I2C1 pins using SYSCFG_I2CFastModePlus_I2C1 parameter or independently
|
|
* on each one of the following pins PB6, PB7, PB8 and PB9.
|
|
* @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability
|
|
* can be enabled only by using SYSCFG_I2CFastModePlus_I2C1 parameter.
|
|
* @note For all I2C2 pins fast mode plus driving capability can be enabled
|
|
* only by using SYSCFG_I2CFastModePlus_I2C2 parameter.
|
|
* @retval None
|
|
*/
|
|
void SYSCFG_I2CFastModePlusConfig(uint32_t SYSCFG_I2CFastModePlus, FunctionalState NewState)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_SYSCFG_I2C_FMP(SYSCFG_I2CFastModePlus));
|
|
assert_param(IS_FUNCTIONAL_STATE(NewState));
|
|
|
|
if (NewState != DISABLE)
|
|
{
|
|
/* Enable fast mode plus driving capability for selected pin */
|
|
SYSCFG->CFGR1 |= (uint32_t)SYSCFG_I2CFastModePlus;
|
|
}
|
|
else
|
|
{
|
|
/* Disable fast mode plus driving capability for selected pin */
|
|
SYSCFG->CFGR1 &= (uint32_t)(~SYSCFG_I2CFastModePlus);
|
|
}
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief Selects the GPIO pin used as EXTI Line.
|
|
* @param EXTI_PortSourceGPIOx: selects the GPIO port to be used as source
|
|
* for EXTI lines where x can be (A, B, C, D, or F).
|
|
* @param EXTI_PinSourcex: specifies the EXTI line to be configured.
|
|
* @note This parameter can be EXTI_PinSourcex where x can be:
|
|
* For HK32F030: (0..15) for GPIOA, GPIOB, GPIOC, (2) for GPIOD and (0..1, 4..7) for GIIOF.
|
|
* For HK32F031: (0..15) for GPIOA, GPIOB, (13..15) for GPIOC and (0..1, 6..7) for GPIOF.
|
|
* @retval None
|
|
*/
|
|
void SYSCFG_EXTILineConfig(uint8_t EXTI_PortSourceGPIOx, uint8_t EXTI_PinSourcex)
|
|
{
|
|
uint32_t tmp = 0x00;
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_EXTI_PORT_SOURCE(EXTI_PortSourceGPIOx));
|
|
assert_param(IS_EXTI_PIN_SOURCE(EXTI_PinSourcex));
|
|
|
|
tmp = ((uint32_t)0x0F) << (0x04 * (EXTI_PinSourcex & (uint8_t)0x03));
|
|
SYSCFG->EXTICR[EXTI_PinSourcex >> 0x02] &= ~tmp;
|
|
SYSCFG->EXTICR[EXTI_PinSourcex >> 0x02] |= (((uint32_t)EXTI_PortSourceGPIOx) << (0x04 * (EXTI_PinSourcex & (uint8_t)0x03)));
|
|
}
|
|
|
|
/**
|
|
* @brief check ISR wrapper: Allow to determine interrupt source per line .
|
|
* @param IT_Source: specifies the interrupt source to check.
|
|
* This parameter can be one of the following values:
|
|
* @arg ITLINE_EWDG EWDG has expired
|
|
* @arg ITLINE_PVDOUT Power voltage detection Interrupt
|
|
* @arg ITLINE_VDDIO2 VDDIO2 Interrupt
|
|
* @arg ITLINE_RTC_WAKEUP RTC WAKEUP -> exti[20] Interrupt
|
|
* @arg ITLINE_RTC_TSTAMP RTC Time Stamp -> exti[19] interrupt
|
|
* @arg ITLINE_RTC_ALRA RTC Alarm -> exti[17] interrupt
|
|
* @arg ITLINE_FLASH_ITF Flash ITF Interrupt
|
|
* @arg ITLINE_CRS CRS Interrupt
|
|
* @arg ITLINE_CLK_CTRL CLK Control Interrupt
|
|
* @arg ITLINE_EXTI0 External Interrupt 0
|
|
* @arg ITLINE_EXTI1 External Interrupt 1
|
|
* @arg ITLINE_EXTI2 External Interrupt 2
|
|
* @arg ITLINE_EXTI3 External Interrupt 3
|
|
* @arg ITLINE_EXTI4 External Interrupt 4
|
|
* @arg ITLINE_EXTI5 External Interrupt 5
|
|
* @arg ITLINE_EXTI6 External Interrupt 6
|
|
* @arg ITLINE_EXTI7 External Interrupt 7
|
|
* @arg ITLINE_EXTI8 External Interrupt 8
|
|
* @arg ITLINE_EXTI9 External Interrupt 9
|
|
* @arg ITLINE_EXTI10 External Interrupt 10
|
|
* @arg ITLINE_EXTI11 External Interrupt 11
|
|
* @arg ITLINE_EXTI12 External Interrupt 12
|
|
* @arg ITLINE_EXTI13 External Interrupt 13
|
|
* @arg ITLINE_EXTI14 External Interrupt 14
|
|
* @arg ITLINE_EXTI15 External Interrupt 15
|
|
* @arg ITLINE_TSC_EOA Touch control EOA Interrupt
|
|
* @arg ITLINE_TSC_MCE Touch control MCE Interrupt
|
|
* @arg ITLINE_DMA1_CH1 DMA1 Channel 1 Interrupt
|
|
* @arg ITLINE_DMA1_CH2 DMA1 Channel 2 Interrupt
|
|
* @arg ITLINE_DMA1_CH3 DMA1 Channel 3 Interrupt
|
|
* @arg ITLINE_DMA2_CH1 DMA2 Channel 1 Interrupt
|
|
* @arg ITLINE_DMA2_CH2 DMA2 Channel 2 Interrupt
|
|
* @arg ITLINE_DMA1_CH4 DMA1 Channel 4 Interrupt
|
|
* @arg ITLINE_DMA1_CH5 DMA1 Channel 5 Interrupt
|
|
* @arg ITLINE_DMA1_CH6 DMA1 Channel 6 Interrupt
|
|
* @arg ITLINE_DMA1_CH7 DMA1 Channel 7 Interrupt
|
|
* @arg ITLINE_DMA2_CH3 DMA2 Channel 3 Interrupt
|
|
* @arg ITLINE_DMA2_CH4 DMA2 Channel 4 Interrupt
|
|
* @arg ITLINE_DMA2_CH5 DMA2 Channel 5 Interrupt
|
|
* @arg ITLINE_ADC ADC Interrupt
|
|
* @arg ITLINE_COMP1 COMP1 Interrupt -> exti[21]
|
|
* @arg ITLINE_COMP2 COMP2 Interrupt -> exti[21]
|
|
* @arg ITLINE_TIM1_BRK TIM1 BRK Interrupt
|
|
* @arg ITLINE_TIM1_UPD TIM1 UPD Interrupt
|
|
* @arg ITLINE_TIM1_TRG TIM1 TRG Interrupt
|
|
* @arg ITLINE_TIM1_CCU TIM1 CCU Interrupt
|
|
* @arg ITLINE_TIM1_CC TIM1 CC Interrupt
|
|
* @arg ITLINE_TIM2 TIM2 Interrupt
|
|
* @arg ITLINE_TIM3 TIM3 Interrupt
|
|
* @arg ITLINE_DAC DAC Interrupt
|
|
* @arg ITLINE_TIM6 TIM6 Interrupt
|
|
* @arg ITLINE_TIM7 TIM7 Interrupt
|
|
* @arg ITLINE_TIM14 TIM14 Interrupt
|
|
* @arg ITLINE_TIM15 TIM15 Interrupt
|
|
* @arg ITLINE_TIM16 TIM16 Interrupt
|
|
* @arg ITLINE_TIM17 TIM17 Interrupt
|
|
* @arg ITLINE_I2C1 I2C1 Interrupt -> exti[23]
|
|
* @arg ITLINE_I2C2 I2C2 Interrupt
|
|
* @arg ITLINE_SPI1 I2C1 Interrupt -> exti[23]
|
|
* @arg ITLINE_SPI2 SPI1 Interrupt
|
|
* @arg ITLINE_USART1 USART1 GLB Interrupt -> exti[25]
|
|
* @arg ITLINE_USART2 USART2 GLB Interrupt -> exti[26]
|
|
* @arg ITLINE_USART3 USART3 Interrupt
|
|
* @arg ITLINE_USART4 USART4 Interrupt
|
|
* @arg ITLINE_USART5 USART5 Interrupt
|
|
* @arg ITLINE_USART6 USART6 Interrupt
|
|
* @arg ITLINE_USART7 USART7 Interrupt
|
|
* @arg ITLINE_USART8 USART8 Interrupt
|
|
* @arg ITLINE_CAN CAN Interrupt
|
|
* @arg ITLINE_CEC CEC Interrupt
|
|
* @retval The new state of IT_LINE_SR.
|
|
*/
|
|
uint32_t SYSCFG_GetPendingIT(uint32_t ITSourceLine)
|
|
{
|
|
assert_param(IS_SYSCFG_ITLINE(ITSourceLine));
|
|
return (SYSCFG->IT_LINE_SR[(ITSourceLine >> 0x18)] & (ITSourceLine & 0x00FFFFFF));
|
|
}
|
|
|
|
/**
|
|
* @brief Connect the selected parameter to the break input of TIM1.
|
|
* @note The selected configuration is locked and can be unlocked by system reset
|
|
* @param SYSCFG_Break: selects the configuration to be connected to break
|
|
* input of TIM1
|
|
* This parameter can be any combination of the following values:
|
|
* @arg SYSCFG_Break_PVD: Connects the PVD event to the Break Input of TIM1,, not available for HK32F030 devices.
|
|
* @arg SYSCFG_Break_SRAMParity: Connects the SRAM_PARITY error signal to the Break Input of TIM1 .
|
|
* @arg SYSCFG_Break_Lockup: Connects Lockup output of CortexM0 to the break input of TIM1.
|
|
* @retval None
|
|
*/
|
|
void SYSCFG_BreakConfig(uint32_t SYSCFG_Break)
|
|
{
|
|
/* Check the parameter */
|
|
assert_param(IS_SYSCFG_LOCK_CONFIG(SYSCFG_Break));
|
|
|
|
SYSCFG->CFGR2 |= (uint32_t) SYSCFG_Break;
|
|
}
|
|
|
|
/**
|
|
* @brief Checks whether the specified SYSCFG flag is set or not.
|
|
* @param SYSCFG_Flag: specifies the SYSCFG flag to check.
|
|
* This parameter can be one of the following values:
|
|
* @arg SYSCFG_FLAG_PE: SRAM parity error flag.
|
|
* @retval The new state of SYSCFG_Flag (SET or RESET).
|
|
*/
|
|
FlagStatus SYSCFG_GetFlagStatus(uint32_t SYSCFG_Flag)
|
|
{
|
|
FlagStatus bitstatus = RESET;
|
|
|
|
/* Check the parameter */
|
|
assert_param(IS_SYSCFG_FLAG(SYSCFG_Flag));
|
|
|
|
/* Check the status of the specified SPI flag */
|
|
if ((SYSCFG->CFGR2 & SYSCFG_CFGR2_SRAM_PE) != (uint32_t)RESET)
|
|
{
|
|
/* SYSCFG_Flag is set */
|
|
bitstatus = SET;
|
|
}
|
|
else
|
|
{
|
|
/* SYSCFG_Flag is reset */
|
|
bitstatus = RESET;
|
|
}
|
|
/* Return the SYSCFG_Flag status */
|
|
return bitstatus;
|
|
}
|
|
|
|
/**
|
|
* @brief Clear the selected SYSCFG flag.
|
|
* @param SYSCFG_Flag: selects the flag to be cleared.
|
|
* This parameter can be any combination of the following values:
|
|
* @arg SYSCFG_FLAG_PE: SRAM parity error flag.
|
|
* @retval None
|
|
*/
|
|
void SYSCFG_ClearFlag(uint32_t SYSCFG_Flag)
|
|
{
|
|
/* Check the parameter */
|
|
assert_param(IS_SYSCFG_FLAG(SYSCFG_Flag));
|
|
|
|
SYSCFG->CFGR2 |= (uint32_t) SYSCFG_Flag;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|