libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity
rt-thread-official/bsp/lm3s9b9x/Libraries/inc/lm3s8962.h

5035 lines
275 KiB
C
Raw Blame History

//*****************************************************************************
//
// lm3s8962.h - LM3S8962 Register Definitions
//
// Copyright (c) 2007-2010 Texas Instruments Incorporated. All rights reserved.
// Software License Agreement
//
// Texas Instruments (TI) is supplying this software for use solely and
// exclusively on TI's microcontroller products. The software is owned by
// TI and/or its suppliers, and is protected under applicable copyright
// laws. You may not combine this software with "viral" open-source
// software in order to form a larger program.
//
// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
// DAMAGES, FOR ANY REASON WHATSOEVER.
//
// This is part of revision 6459 of the Stellaris Firmware Development Package.
//
//*****************************************************************************
#ifndef __LM3S8962_H__
#define __LM3S8962_H__
//*****************************************************************************
//
// Watchdog Timer registers (WATCHDOG0)
//
//*****************************************************************************
#define WATCHDOG0_LOAD_R (*((volatile unsigned long *)0x40000000))
#define WATCHDOG0_VALUE_R (*((volatile unsigned long *)0x40000004))
#define WATCHDOG0_CTL_R (*((volatile unsigned long *)0x40000008))
#define WATCHDOG0_ICR_R (*((volatile unsigned long *)0x4000000C))
#define WATCHDOG0_RIS_R (*((volatile unsigned long *)0x40000010))
#define WATCHDOG0_MIS_R (*((volatile unsigned long *)0x40000014))
#define WATCHDOG0_TEST_R (*((volatile unsigned long *)0x40000418))
#define WATCHDOG0_LOCK_R (*((volatile unsigned long *)0x40000C00))
//*****************************************************************************
//
// GPIO registers (PORTA)
//
//*****************************************************************************
#define GPIO_PORTA_DATA_BITS_R ((volatile unsigned long *)0x40004000)
#define GPIO_PORTA_DATA_R (*((volatile unsigned long *)0x400043FC))
#define GPIO_PORTA_DIR_R (*((volatile unsigned long *)0x40004400))
#define GPIO_PORTA_IS_R (*((volatile unsigned long *)0x40004404))
#define GPIO_PORTA_IBE_R (*((volatile unsigned long *)0x40004408))
#define GPIO_PORTA_IEV_R (*((volatile unsigned long *)0x4000440C))
#define GPIO_PORTA_IM_R (*((volatile unsigned long *)0x40004410))
#define GPIO_PORTA_RIS_R (*((volatile unsigned long *)0x40004414))
#define GPIO_PORTA_MIS_R (*((volatile unsigned long *)0x40004418))
#define GPIO_PORTA_ICR_R (*((volatile unsigned long *)0x4000441C))
#define GPIO_PORTA_AFSEL_R (*((volatile unsigned long *)0x40004420))
#define GPIO_PORTA_DR2R_R (*((volatile unsigned long *)0x40004500))
#define GPIO_PORTA_DR4R_R (*((volatile unsigned long *)0x40004504))
#define GPIO_PORTA_DR8R_R (*((volatile unsigned long *)0x40004508))
#define GPIO_PORTA_ODR_R (*((volatile unsigned long *)0x4000450C))
#define GPIO_PORTA_PUR_R (*((volatile unsigned long *)0x40004510))
#define GPIO_PORTA_PDR_R (*((volatile unsigned long *)0x40004514))
#define GPIO_PORTA_SLR_R (*((volatile unsigned long *)0x40004518))
#define GPIO_PORTA_DEN_R (*((volatile unsigned long *)0x4000451C))
#define GPIO_PORTA_LOCK_R (*((volatile unsigned long *)0x40004520))
#define GPIO_PORTA_CR_R (*((volatile unsigned long *)0x40004524))
//*****************************************************************************
//
// GPIO registers (PORTB)
//
//*****************************************************************************
#define GPIO_PORTB_DATA_BITS_R ((volatile unsigned long *)0x40005000)
#define GPIO_PORTB_DATA_R (*((volatile unsigned long *)0x400053FC))
#define GPIO_PORTB_DIR_R (*((volatile unsigned long *)0x40005400))
#define GPIO_PORTB_IS_R (*((volatile unsigned long *)0x40005404))
#define GPIO_PORTB_IBE_R (*((volatile unsigned long *)0x40005408))
#define GPIO_PORTB_IEV_R (*((volatile unsigned long *)0x4000540C))
#define GPIO_PORTB_IM_R (*((volatile unsigned long *)0x40005410))
#define GPIO_PORTB_RIS_R (*((volatile unsigned long *)0x40005414))
#define GPIO_PORTB_MIS_R (*((volatile unsigned long *)0x40005418))
#define GPIO_PORTB_ICR_R (*((volatile unsigned long *)0x4000541C))
#define GPIO_PORTB_AFSEL_R (*((volatile unsigned long *)0x40005420))
#define GPIO_PORTB_DR2R_R (*((volatile unsigned long *)0x40005500))
#define GPIO_PORTB_DR4R_R (*((volatile unsigned long *)0x40005504))
#define GPIO_PORTB_DR8R_R (*((volatile unsigned long *)0x40005508))
#define GPIO_PORTB_ODR_R (*((volatile unsigned long *)0x4000550C))
#define GPIO_PORTB_PUR_R (*((volatile unsigned long *)0x40005510))
#define GPIO_PORTB_PDR_R (*((volatile unsigned long *)0x40005514))
#define GPIO_PORTB_SLR_R (*((volatile unsigned long *)0x40005518))
#define GPIO_PORTB_DEN_R (*((volatile unsigned long *)0x4000551C))
#define GPIO_PORTB_LOCK_R (*((volatile unsigned long *)0x40005520))
#define GPIO_PORTB_CR_R (*((volatile unsigned long *)0x40005524))
//*****************************************************************************
//
// GPIO registers (PORTC)
//
//*****************************************************************************
#define GPIO_PORTC_DATA_BITS_R ((volatile unsigned long *)0x40006000)
#define GPIO_PORTC_DATA_R (*((volatile unsigned long *)0x400063FC))
#define GPIO_PORTC_DIR_R (*((volatile unsigned long *)0x40006400))
#define GPIO_PORTC_IS_R (*((volatile unsigned long *)0x40006404))
#define GPIO_PORTC_IBE_R (*((volatile unsigned long *)0x40006408))
#define GPIO_PORTC_IEV_R (*((volatile unsigned long *)0x4000640C))
#define GPIO_PORTC_IM_R (*((volatile unsigned long *)0x40006410))
#define GPIO_PORTC_RIS_R (*((volatile unsigned long *)0x40006414))
#define GPIO_PORTC_MIS_R (*((volatile unsigned long *)0x40006418))
#define GPIO_PORTC_ICR_R (*((volatile unsigned long *)0x4000641C))
#define GPIO_PORTC_AFSEL_R (*((volatile unsigned long *)0x40006420))
#define GPIO_PORTC_DR2R_R (*((volatile unsigned long *)0x40006500))
#define GPIO_PORTC_DR4R_R (*((volatile unsigned long *)0x40006504))
#define GPIO_PORTC_DR8R_R (*((volatile unsigned long *)0x40006508))
#define GPIO_PORTC_ODR_R (*((volatile unsigned long *)0x4000650C))
#define GPIO_PORTC_PUR_R (*((volatile unsigned long *)0x40006510))
#define GPIO_PORTC_PDR_R (*((volatile unsigned long *)0x40006514))
#define GPIO_PORTC_SLR_R (*((volatile unsigned long *)0x40006518))
#define GPIO_PORTC_DEN_R (*((volatile unsigned long *)0x4000651C))
#define GPIO_PORTC_LOCK_R (*((volatile unsigned long *)0x40006520))
#define GPIO_PORTC_CR_R (*((volatile unsigned long *)0x40006524))
//*****************************************************************************
//
// GPIO registers (PORTD)
//
//*****************************************************************************
#define GPIO_PORTD_DATA_BITS_R ((volatile unsigned long *)0x40007000)
#define GPIO_PORTD_DATA_R (*((volatile unsigned long *)0x400073FC))
#define GPIO_PORTD_DIR_R (*((volatile unsigned long *)0x40007400))
#define GPIO_PORTD_IS_R (*((volatile unsigned long *)0x40007404))
#define GPIO_PORTD_IBE_R (*((volatile unsigned long *)0x40007408))
#define GPIO_PORTD_IEV_R (*((volatile unsigned long *)0x4000740C))
#define GPIO_PORTD_IM_R (*((volatile unsigned long *)0x40007410))
#define GPIO_PORTD_RIS_R (*((volatile unsigned long *)0x40007414))
#define GPIO_PORTD_MIS_R (*((volatile unsigned long *)0x40007418))
#define GPIO_PORTD_ICR_R (*((volatile unsigned long *)0x4000741C))
#define GPIO_PORTD_AFSEL_R (*((volatile unsigned long *)0x40007420))
#define GPIO_PORTD_DR2R_R (*((volatile unsigned long *)0x40007500))
#define GPIO_PORTD_DR4R_R (*((volatile unsigned long *)0x40007504))
#define GPIO_PORTD_DR8R_R (*((volatile unsigned long *)0x40007508))
#define GPIO_PORTD_ODR_R (*((volatile unsigned long *)0x4000750C))
#define GPIO_PORTD_PUR_R (*((volatile unsigned long *)0x40007510))
#define GPIO_PORTD_PDR_R (*((volatile unsigned long *)0x40007514))
#define GPIO_PORTD_SLR_R (*((volatile unsigned long *)0x40007518))
#define GPIO_PORTD_DEN_R (*((volatile unsigned long *)0x4000751C))
#define GPIO_PORTD_LOCK_R (*((volatile unsigned long *)0x40007520))
#define GPIO_PORTD_CR_R (*((volatile unsigned long *)0x40007524))
//*****************************************************************************
//
// SSI registers (SSI0)
//
//*****************************************************************************
#define SSI0_CR0_R (*((volatile unsigned long *)0x40008000))
#define SSI0_CR1_R (*((volatile unsigned long *)0x40008004))
#define SSI0_DR_R (*((volatile unsigned long *)0x40008008))
#define SSI0_SR_R (*((volatile unsigned long *)0x4000800C))
#define SSI0_CPSR_R (*((volatile unsigned long *)0x40008010))
#define SSI0_IM_R (*((volatile unsigned long *)0x40008014))
#define SSI0_RIS_R (*((volatile unsigned long *)0x40008018))
#define SSI0_MIS_R (*((volatile unsigned long *)0x4000801C))
#define SSI0_ICR_R (*((volatile unsigned long *)0x40008020))
//*****************************************************************************
//
// UART registers (UART0)
//
//*****************************************************************************
#define UART0_DR_R (*((volatile unsigned long *)0x4000C000))
#define UART0_RSR_R (*((volatile unsigned long *)0x4000C004))
#define UART0_ECR_R (*((volatile unsigned long *)0x4000C004))
#define UART0_FR_R (*((volatile unsigned long *)0x4000C018))
#define UART0_ILPR_R (*((volatile unsigned long *)0x4000C020))
#define UART0_IBRD_R (*((volatile unsigned long *)0x4000C024))
#define UART0_FBRD_R (*((volatile unsigned long *)0x4000C028))
#define UART0_LCRH_R (*((volatile unsigned long *)0x4000C02C))
#define UART0_CTL_R (*((volatile unsigned long *)0x4000C030))
#define UART0_IFLS_R (*((volatile unsigned long *)0x4000C034))
#define UART0_IM_R (*((volatile unsigned long *)0x4000C038))
#define UART0_RIS_R (*((volatile unsigned long *)0x4000C03C))
#define UART0_MIS_R (*((volatile unsigned long *)0x4000C040))
#define UART0_ICR_R (*((volatile unsigned long *)0x4000C044))
//*****************************************************************************
//
// UART registers (UART1)
//
//*****************************************************************************
#define UART1_DR_R (*((volatile unsigned long *)0x4000D000))
#define UART1_RSR_R (*((volatile unsigned long *)0x4000D004))
#define UART1_ECR_R (*((volatile unsigned long *)0x4000D004))
#define UART1_FR_R (*((volatile unsigned long *)0x4000D018))
#define UART1_ILPR_R (*((volatile unsigned long *)0x4000D020))
#define UART1_IBRD_R (*((volatile unsigned long *)0x4000D024))
#define UART1_FBRD_R (*((volatile unsigned long *)0x4000D028))
#define UART1_LCRH_R (*((volatile unsigned long *)0x4000D02C))
#define UART1_CTL_R (*((volatile unsigned long *)0x4000D030))
#define UART1_IFLS_R (*((volatile unsigned long *)0x4000D034))
#define UART1_IM_R (*((volatile unsigned long *)0x4000D038))
#define UART1_RIS_R (*((volatile unsigned long *)0x4000D03C))
#define UART1_MIS_R (*((volatile unsigned long *)0x4000D040))
#define UART1_ICR_R (*((volatile unsigned long *)0x4000D044))
//*****************************************************************************
//
// I2C registers (I2C0 MASTER)
//
//*****************************************************************************
#define I2C0_MASTER_MSA_R (*((volatile unsigned long *)0x40020000))
#define I2C0_MASTER_SOAR_R (*((volatile unsigned long *)0x40020000))
#define I2C0_MASTER_SCSR_R (*((volatile unsigned long *)0x40020004))
#define I2C0_MASTER_MCS_R (*((volatile unsigned long *)0x40020004))
#define I2C0_MASTER_SDR_R (*((volatile unsigned long *)0x40020008))
#define I2C0_MASTER_MDR_R (*((volatile unsigned long *)0x40020008))
#define I2C0_MASTER_MTPR_R (*((volatile unsigned long *)0x4002000C))
#define I2C0_MASTER_SIMR_R (*((volatile unsigned long *)0x4002000C))
#define I2C0_MASTER_SRIS_R (*((volatile unsigned long *)0x40020010))
#define I2C0_MASTER_MIMR_R (*((volatile unsigned long *)0x40020010))
#define I2C0_MASTER_MRIS_R (*((volatile unsigned long *)0x40020014))
#define I2C0_MASTER_SMIS_R (*((volatile unsigned long *)0x40020014))
#define I2C0_MASTER_SICR_R (*((volatile unsigned long *)0x40020018))
#define I2C0_MASTER_MMIS_R (*((volatile unsigned long *)0x40020018))
#define I2C0_MASTER_MICR_R (*((volatile unsigned long *)0x4002001C))
#define I2C0_MASTER_MCR_R (*((volatile unsigned long *)0x40020020))
//*****************************************************************************
//
// I2C registers (I2C0 SLAVE)
//
//*****************************************************************************
#define I2C0_SLAVE_MSA_R (*((volatile unsigned long *)0x40020800))
#define I2C0_SLAVE_SOAR_R (*((volatile unsigned long *)0x40020800))
#define I2C0_SLAVE_SCSR_R (*((volatile unsigned long *)0x40020804))
#define I2C0_SLAVE_MCS_R (*((volatile unsigned long *)0x40020804))
#define I2C0_SLAVE_SDR_R (*((volatile unsigned long *)0x40020808))
#define I2C0_SLAVE_MDR_R (*((volatile unsigned long *)0x40020808))
#define I2C0_SLAVE_MTPR_R (*((volatile unsigned long *)0x4002080C))
#define I2C0_SLAVE_SIMR_R (*((volatile unsigned long *)0x4002080C))
#define I2C0_SLAVE_SRIS_R (*((volatile unsigned long *)0x40020810))
#define I2C0_SLAVE_MIMR_R (*((volatile unsigned long *)0x40020810))
#define I2C0_SLAVE_MRIS_R (*((volatile unsigned long *)0x40020814))
#define I2C0_SLAVE_SMIS_R (*((volatile unsigned long *)0x40020814))
#define I2C0_SLAVE_SICR_R (*((volatile unsigned long *)0x40020818))
#define I2C0_SLAVE_MMIS_R (*((volatile unsigned long *)0x40020818))
#define I2C0_SLAVE_MICR_R (*((volatile unsigned long *)0x4002081C))
#define I2C0_SLAVE_MCR_R (*((volatile unsigned long *)0x40020820))
//*****************************************************************************
//
// GPIO registers (PORTE)
//
//*****************************************************************************
#define GPIO_PORTE_DATA_BITS_R ((volatile unsigned long *)0x40024000)
#define GPIO_PORTE_DATA_R (*((volatile unsigned long *)0x400243FC))
#define GPIO_PORTE_DIR_R (*((volatile unsigned long *)0x40024400))
#define GPIO_PORTE_IS_R (*((volatile unsigned long *)0x40024404))
#define GPIO_PORTE_IBE_R (*((volatile unsigned long *)0x40024408))
#define GPIO_PORTE_IEV_R (*((volatile unsigned long *)0x4002440C))
#define GPIO_PORTE_IM_R (*((volatile unsigned long *)0x40024410))
#define GPIO_PORTE_RIS_R (*((volatile unsigned long *)0x40024414))
#define GPIO_PORTE_MIS_R (*((volatile unsigned long *)0x40024418))
#define GPIO_PORTE_ICR_R (*((volatile unsigned long *)0x4002441C))
#define GPIO_PORTE_AFSEL_R (*((volatile unsigned long *)0x40024420))
#define GPIO_PORTE_DR2R_R (*((volatile unsigned long *)0x40024500))
#define GPIO_PORTE_DR4R_R (*((volatile unsigned long *)0x40024504))
#define GPIO_PORTE_DR8R_R (*((volatile unsigned long *)0x40024508))
#define GPIO_PORTE_ODR_R (*((volatile unsigned long *)0x4002450C))
#define GPIO_PORTE_PUR_R (*((volatile unsigned long *)0x40024510))
#define GPIO_PORTE_PDR_R (*((volatile unsigned long *)0x40024514))
#define GPIO_PORTE_SLR_R (*((volatile unsigned long *)0x40024518))
#define GPIO_PORTE_DEN_R (*((volatile unsigned long *)0x4002451C))
#define GPIO_PORTE_LOCK_R (*((volatile unsigned long *)0x40024520))
#define GPIO_PORTE_CR_R (*((volatile unsigned long *)0x40024524))
//*****************************************************************************
//
// GPIO registers (PORTF)
//
//*****************************************************************************
#define GPIO_PORTF_DATA_BITS_R ((volatile unsigned long *)0x40025000)
#define GPIO_PORTF_DATA_R (*((volatile unsigned long *)0x400253FC))
#define GPIO_PORTF_DIR_R (*((volatile unsigned long *)0x40025400))
#define GPIO_PORTF_IS_R (*((volatile unsigned long *)0x40025404))
#define GPIO_PORTF_IBE_R (*((volatile unsigned long *)0x40025408))
#define GPIO_PORTF_IEV_R (*((volatile unsigned long *)0x4002540C))
#define GPIO_PORTF_IM_R (*((volatile unsigned long *)0x40025410))
#define GPIO_PORTF_RIS_R (*((volatile unsigned long *)0x40025414))
#define GPIO_PORTF_MIS_R (*((volatile unsigned long *)0x40025418))
#define GPIO_PORTF_ICR_R (*((volatile unsigned long *)0x4002541C))
#define GPIO_PORTF_AFSEL_R (*((volatile unsigned long *)0x40025420))
#define GPIO_PORTF_DR2R_R (*((volatile unsigned long *)0x40025500))
#define GPIO_PORTF_DR4R_R (*((volatile unsigned long *)0x40025504))
#define GPIO_PORTF_DR8R_R (*((volatile unsigned long *)0x40025508))
#define GPIO_PORTF_ODR_R (*((volatile unsigned long *)0x4002550C))
#define GPIO_PORTF_PUR_R (*((volatile unsigned long *)0x40025510))
#define GPIO_PORTF_PDR_R (*((volatile unsigned long *)0x40025514))
#define GPIO_PORTF_SLR_R (*((volatile unsigned long *)0x40025518))
#define GPIO_PORTF_DEN_R (*((volatile unsigned long *)0x4002551C))
#define GPIO_PORTF_LOCK_R (*((volatile unsigned long *)0x40025520))
#define GPIO_PORTF_CR_R (*((volatile unsigned long *)0x40025524))
//*****************************************************************************
//
// GPIO registers (PORTG)
//
//*****************************************************************************
#define GPIO_PORTG_DATA_BITS_R ((volatile unsigned long *)0x40026000)
#define GPIO_PORTG_DATA_R (*((volatile unsigned long *)0x400263FC))
#define GPIO_PORTG_DIR_R (*((volatile unsigned long *)0x40026400))
#define GPIO_PORTG_IS_R (*((volatile unsigned long *)0x40026404))
#define GPIO_PORTG_IBE_R (*((volatile unsigned long *)0x40026408))
#define GPIO_PORTG_IEV_R (*((volatile unsigned long *)0x4002640C))
#define GPIO_PORTG_IM_R (*((volatile unsigned long *)0x40026410))
#define GPIO_PORTG_RIS_R (*((volatile unsigned long *)0x40026414))
#define GPIO_PORTG_MIS_R (*((volatile unsigned long *)0x40026418))
#define GPIO_PORTG_ICR_R (*((volatile unsigned long *)0x4002641C))
#define GPIO_PORTG_AFSEL_R (*((volatile unsigned long *)0x40026420))
#define GPIO_PORTG_DR2R_R (*((volatile unsigned long *)0x40026500))
#define GPIO_PORTG_DR4R_R (*((volatile unsigned long *)0x40026504))
#define GPIO_PORTG_DR8R_R (*((volatile unsigned long *)0x40026508))
#define GPIO_PORTG_ODR_R (*((volatile unsigned long *)0x4002650C))
#define GPIO_PORTG_PUR_R (*((volatile unsigned long *)0x40026510))
#define GPIO_PORTG_PDR_R (*((volatile unsigned long *)0x40026514))
#define GPIO_PORTG_SLR_R (*((volatile unsigned long *)0x40026518))
#define GPIO_PORTG_DEN_R (*((volatile unsigned long *)0x4002651C))
#define GPIO_PORTG_LOCK_R (*((volatile unsigned long *)0x40026520))
#define GPIO_PORTG_CR_R (*((volatile unsigned long *)0x40026524))
//*****************************************************************************
//
// PWM registers (PWM)
//
//*****************************************************************************
#define PWM_CTL_R (*((volatile unsigned long *)0x40028000))
#define PWM_SYNC_R (*((volatile unsigned long *)0x40028004))
#define PWM_ENABLE_R (*((volatile unsigned long *)0x40028008))
#define PWM_INVERT_R (*((volatile unsigned long *)0x4002800C))
#define PWM_FAULT_R (*((volatile unsigned long *)0x40028010))
#define PWM_INTEN_R (*((volatile unsigned long *)0x40028014))
#define PWM_RIS_R (*((volatile unsigned long *)0x40028018))
#define PWM_ISC_R (*((volatile unsigned long *)0x4002801C))
#define PWM_STATUS_R (*((volatile unsigned long *)0x40028020))
#define PWM_0_CTL_R (*((volatile unsigned long *)0x40028040))
#define PWM_0_INTEN_R (*((volatile unsigned long *)0x40028044))
#define PWM_0_RIS_R (*((volatile unsigned long *)0x40028048))
#define PWM_0_ISC_R (*((volatile unsigned long *)0x4002804C))
#define PWM_0_LOAD_R (*((volatile unsigned long *)0x40028050))
#define PWM_0_COUNT_R (*((volatile unsigned long *)0x40028054))
#define PWM_0_CMPA_R (*((volatile unsigned long *)0x40028058))
#define PWM_0_CMPB_R (*((volatile unsigned long *)0x4002805C))
#define PWM_0_GENA_R (*((volatile unsigned long *)0x40028060))
#define PWM_0_GENB_R (*((volatile unsigned long *)0x40028064))
#define PWM_0_DBCTL_R (*((volatile unsigned long *)0x40028068))
#define PWM_0_DBRISE_R (*((volatile unsigned long *)0x4002806C))
#define PWM_0_DBFALL_R (*((volatile unsigned long *)0x40028070))
#define PWM_1_CTL_R (*((volatile unsigned long *)0x40028080))
#define PWM_1_INTEN_R (*((volatile unsigned long *)0x40028084))
#define PWM_1_RIS_R (*((volatile unsigned long *)0x40028088))
#define PWM_1_ISC_R (*((volatile unsigned long *)0x4002808C))
#define PWM_1_LOAD_R (*((volatile unsigned long *)0x40028090))
#define PWM_1_COUNT_R (*((volatile unsigned long *)0x40028094))
#define PWM_1_CMPA_R (*((volatile unsigned long *)0x40028098))
#define PWM_1_CMPB_R (*((volatile unsigned long *)0x4002809C))
#define PWM_1_GENA_R (*((volatile unsigned long *)0x400280A0))
#define PWM_1_GENB_R (*((volatile unsigned long *)0x400280A4))
#define PWM_1_DBCTL_R (*((volatile unsigned long *)0x400280A8))
#define PWM_1_DBRISE_R (*((volatile unsigned long *)0x400280AC))
#define PWM_1_DBFALL_R (*((volatile unsigned long *)0x400280B0))
#define PWM_2_CTL_R (*((volatile unsigned long *)0x400280C0))
#define PWM_2_INTEN_R (*((volatile unsigned long *)0x400280C4))
#define PWM_2_RIS_R (*((volatile unsigned long *)0x400280C8))
#define PWM_2_ISC_R (*((volatile unsigned long *)0x400280CC))
#define PWM_2_LOAD_R (*((volatile unsigned long *)0x400280D0))
#define PWM_2_COUNT_R (*((volatile unsigned long *)0x400280D4))
#define PWM_2_CMPA_R (*((volatile unsigned long *)0x400280D8))
#define PWM_2_CMPB_R (*((volatile unsigned long *)0x400280DC))
#define PWM_2_GENA_R (*((volatile unsigned long *)0x400280E0))
#define PWM_2_GENB_R (*((volatile unsigned long *)0x400280E4))
#define PWM_2_DBCTL_R (*((volatile unsigned long *)0x400280E8))
#define PWM_2_DBRISE_R (*((volatile unsigned long *)0x400280EC))
#define PWM_2_DBFALL_R (*((volatile unsigned long *)0x400280F0))
//*****************************************************************************
//
// QEI registers (QEI0)
//
//*****************************************************************************
#define QEI0_CTL_R (*((volatile unsigned long *)0x4002C000))
#define QEI0_STAT_R (*((volatile unsigned long *)0x4002C004))
#define QEI0_POS_R (*((volatile unsigned long *)0x4002C008))
#define QEI0_MAXPOS_R (*((volatile unsigned long *)0x4002C00C))
#define QEI0_LOAD_R (*((volatile unsigned long *)0x4002C010))
#define QEI0_TIME_R (*((volatile unsigned long *)0x4002C014))
#define QEI0_COUNT_R (*((volatile unsigned long *)0x4002C018))
#define QEI0_SPEED_R (*((volatile unsigned long *)0x4002C01C))
#define QEI0_INTEN_R (*((volatile unsigned long *)0x4002C020))
#define QEI0_RIS_R (*((volatile unsigned long *)0x4002C024))
#define QEI0_ISC_R (*((volatile unsigned long *)0x4002C028))
//*****************************************************************************
//
// QEI registers (QEI1)
//
//*****************************************************************************
#define QEI1_CTL_R (*((volatile unsigned long *)0x4002D000))
#define QEI1_STAT_R (*((volatile unsigned long *)0x4002D004))
#define QEI1_POS_R (*((volatile unsigned long *)0x4002D008))
#define QEI1_MAXPOS_R (*((volatile unsigned long *)0x4002D00C))
#define QEI1_LOAD_R (*((volatile unsigned long *)0x4002D010))
#define QEI1_TIME_R (*((volatile unsigned long *)0x4002D014))
#define QEI1_COUNT_R (*((volatile unsigned long *)0x4002D018))
#define QEI1_SPEED_R (*((volatile unsigned long *)0x4002D01C))
#define QEI1_INTEN_R (*((volatile unsigned long *)0x4002D020))
#define QEI1_RIS_R (*((volatile unsigned long *)0x4002D024))
#define QEI1_ISC_R (*((volatile unsigned long *)0x4002D028))
//*****************************************************************************
//
// Timer registers (TIMER0)
//
//*****************************************************************************
#define TIMER0_CFG_R (*((volatile unsigned long *)0x40030000))
#define TIMER0_TAMR_R (*((volatile unsigned long *)0x40030004))
#define TIMER0_TBMR_R (*((volatile unsigned long *)0x40030008))
#define TIMER0_CTL_R (*((volatile unsigned long *)0x4003000C))
#define TIMER0_IMR_R (*((volatile unsigned long *)0x40030018))
#define TIMER0_RIS_R (*((volatile unsigned long *)0x4003001C))
#define TIMER0_MIS_R (*((volatile unsigned long *)0x40030020))
#define TIMER0_ICR_R (*((volatile unsigned long *)0x40030024))
#define TIMER0_TAILR_R (*((volatile unsigned long *)0x40030028))
#define TIMER0_TBILR_R (*((volatile unsigned long *)0x4003002C))
#define TIMER0_TAMATCHR_R (*((volatile unsigned long *)0x40030030))
#define TIMER0_TBMATCHR_R (*((volatile unsigned long *)0x40030034))
#define TIMER0_TAPR_R (*((volatile unsigned long *)0x40030038))
#define TIMER0_TBPR_R (*((volatile unsigned long *)0x4003003C))
#define TIMER0_TAPMR_R (*((volatile unsigned long *)0x40030040))
#define TIMER0_TBPMR_R (*((volatile unsigned long *)0x40030044))
#define TIMER0_TAR_R (*((volatile unsigned long *)0x40030048))
#define TIMER0_TBR_R (*((volatile unsigned long *)0x4003004C))
//*****************************************************************************
//
// Timer registers (TIMER1)
//
//*****************************************************************************
#define TIMER1_CFG_R (*((volatile unsigned long *)0x40031000))
#define TIMER1_TAMR_R (*((volatile unsigned long *)0x40031004))
#define TIMER1_TBMR_R (*((volatile unsigned long *)0x40031008))
#define TIMER1_CTL_R (*((volatile unsigned long *)0x4003100C))
#define TIMER1_IMR_R (*((volatile unsigned long *)0x40031018))
#define TIMER1_RIS_R (*((volatile unsigned long *)0x4003101C))
#define TIMER1_MIS_R (*((volatile unsigned long *)0x40031020))
#define TIMER1_ICR_R (*((volatile unsigned long *)0x40031024))
#define TIMER1_TAILR_R (*((volatile unsigned long *)0x40031028))
#define TIMER1_TBILR_R (*((volatile unsigned long *)0x4003102C))
#define TIMER1_TAMATCHR_R (*((volatile unsigned long *)0x40031030))
#define TIMER1_TBMATCHR_R (*((volatile unsigned long *)0x40031034))
#define TIMER1_TAPR_R (*((volatile unsigned long *)0x40031038))
#define TIMER1_TBPR_R (*((volatile unsigned long *)0x4003103C))
#define TIMER1_TAPMR_R (*((volatile unsigned long *)0x40031040))
#define TIMER1_TBPMR_R (*((volatile unsigned long *)0x40031044))
#define TIMER1_TAR_R (*((volatile unsigned long *)0x40031048))
#define TIMER1_TBR_R (*((volatile unsigned long *)0x4003104C))
//*****************************************************************************
//
// Timer registers (TIMER2)
//
//*****************************************************************************
#define TIMER2_CFG_R (*((volatile unsigned long *)0x40032000))
#define TIMER2_TAMR_R (*((volatile unsigned long *)0x40032004))
#define TIMER2_TBMR_R (*((volatile unsigned long *)0x40032008))
#define TIMER2_CTL_R (*((volatile unsigned long *)0x4003200C))
#define TIMER2_IMR_R (*((volatile unsigned long *)0x40032018))
#define TIMER2_RIS_R (*((volatile unsigned long *)0x4003201C))
#define TIMER2_MIS_R (*((volatile unsigned long *)0x40032020))
#define TIMER2_ICR_R (*((volatile unsigned long *)0x40032024))
#define TIMER2_TAILR_R (*((volatile unsigned long *)0x40032028))
#define TIMER2_TBILR_R (*((volatile unsigned long *)0x4003202C))
#define TIMER2_TAMATCHR_R (*((volatile unsigned long *)0x40032030))
#define TIMER2_TBMATCHR_R (*((volatile unsigned long *)0x40032034))
#define TIMER2_TAPR_R (*((volatile unsigned long *)0x40032038))
#define TIMER2_TBPR_R (*((volatile unsigned long *)0x4003203C))
#define TIMER2_TAPMR_R (*((volatile unsigned long *)0x40032040))
#define TIMER2_TBPMR_R (*((volatile unsigned long *)0x40032044))
#define TIMER2_TAR_R (*((volatile unsigned long *)0x40032048))
#define TIMER2_TBR_R (*((volatile unsigned long *)0x4003204C))
//*****************************************************************************
//
// Timer registers (TIMER3)
//
//*****************************************************************************
#define TIMER3_CFG_R (*((volatile unsigned long *)0x40033000))
#define TIMER3_TAMR_R (*((volatile unsigned long *)0x40033004))
#define TIMER3_TBMR_R (*((volatile unsigned long *)0x40033008))
#define TIMER3_CTL_R (*((volatile unsigned long *)0x4003300C))
#define TIMER3_IMR_R (*((volatile unsigned long *)0x40033018))
#define TIMER3_RIS_R (*((volatile unsigned long *)0x4003301C))
#define TIMER3_MIS_R (*((volatile unsigned long *)0x40033020))
#define TIMER3_ICR_R (*((volatile unsigned long *)0x40033024))
#define TIMER3_TAILR_R (*((volatile unsigned long *)0x40033028))
#define TIMER3_TBILR_R (*((volatile unsigned long *)0x4003302C))
#define TIMER3_TAMATCHR_R (*((volatile unsigned long *)0x40033030))
#define TIMER3_TBMATCHR_R (*((volatile unsigned long *)0x40033034))
#define TIMER3_TAPR_R (*((volatile unsigned long *)0x40033038))
#define TIMER3_TBPR_R (*((volatile unsigned long *)0x4003303C))
#define TIMER3_TAPMR_R (*((volatile unsigned long *)0x40033040))
#define TIMER3_TBPMR_R (*((volatile unsigned long *)0x40033044))
#define TIMER3_TAR_R (*((volatile unsigned long *)0x40033048))
#define TIMER3_TBR_R (*((volatile unsigned long *)0x4003304C))
//*****************************************************************************
//
// ADC registers (ADC0)
//
//*****************************************************************************
#define ADC0_ACTSS_R (*((volatile unsigned long *)0x40038000))
#define ADC0_RIS_R (*((volatile unsigned long *)0x40038004))
#define ADC0_IM_R (*((volatile unsigned long *)0x40038008))
#define ADC0_ISC_R (*((volatile unsigned long *)0x4003800C))
#define ADC0_OSTAT_R (*((volatile unsigned long *)0x40038010))
#define ADC0_EMUX_R (*((volatile unsigned long *)0x40038014))
#define ADC0_USTAT_R (*((volatile unsigned long *)0x40038018))
#define ADC0_SSPRI_R (*((volatile unsigned long *)0x40038020))
#define ADC0_PSSI_R (*((volatile unsigned long *)0x40038028))
#define ADC0_SAC_R (*((volatile unsigned long *)0x40038030))
#define ADC0_SSMUX0_R (*((volatile unsigned long *)0x40038040))
#define ADC0_SSCTL0_R (*((volatile unsigned long *)0x40038044))
#define ADC0_SSFIFO0_R (*((volatile unsigned long *)0x40038048))
#define ADC0_SSFSTAT0_R (*((volatile unsigned long *)0x4003804C))
#define ADC0_SSMUX1_R (*((volatile unsigned long *)0x40038060))
#define ADC0_SSCTL1_R (*((volatile unsigned long *)0x40038064))
#define ADC0_SSFIFO1_R (*((volatile unsigned long *)0x40038068))
#define ADC0_SSFSTAT1_R (*((volatile unsigned long *)0x4003806C))
#define ADC0_SSMUX2_R (*((volatile unsigned long *)0x40038080))
#define ADC0_SSCTL2_R (*((volatile unsigned long *)0x40038084))
#define ADC0_SSFIFO2_R (*((volatile unsigned long *)0x40038088))
#define ADC0_SSFSTAT2_R (*((volatile unsigned long *)0x4003808C))
#define ADC0_SSMUX3_R (*((volatile unsigned long *)0x400380A0))
#define ADC0_SSCTL3_R (*((volatile unsigned long *)0x400380A4))
#define ADC0_SSFIFO3_R (*((volatile unsigned long *)0x400380A8))
#define ADC0_SSFSTAT3_R (*((volatile unsigned long *)0x400380AC))
#define ADC0_TMLB_R (*((volatile unsigned long *)0x40038100))
//*****************************************************************************
//
// Comparator registers (COMP)
//
//*****************************************************************************
#define COMP_ACMIS_R (*((volatile unsigned long *)0x4003C000))
#define COMP_ACRIS_R (*((volatile unsigned long *)0x4003C004))
#define COMP_ACINTEN_R (*((volatile unsigned long *)0x4003C008))
#define COMP_ACREFCTL_R (*((volatile unsigned long *)0x4003C010))
#define COMP_ACSTAT0_R (*((volatile unsigned long *)0x4003C020))
#define COMP_ACCTL0_R (*((volatile unsigned long *)0x4003C024))
//*****************************************************************************
//
// CAN registers (CAN0)
//
//*****************************************************************************
#define CAN0_CTL_R (*((volatile unsigned long *)0x40040000))
#define CAN0_STS_R (*((volatile unsigned long *)0x40040004))
#define CAN0_ERR_R (*((volatile unsigned long *)0x40040008))
#define CAN0_BIT_R (*((volatile unsigned long *)0x4004000C))
#define CAN0_INT_R (*((volatile unsigned long *)0x40040010))
#define CAN0_TST_R (*((volatile unsigned long *)0x40040014))
#define CAN0_BRPE_R (*((volatile unsigned long *)0x40040018))
#define CAN0_IF1CRQ_R (*((volatile unsigned long *)0x40040020))
#define CAN0_IF1CMSK_R (*((volatile unsigned long *)0x40040024))
#define CAN0_IF1MSK1_R (*((volatile unsigned long *)0x40040028))
#define CAN0_IF1MSK2_R (*((volatile unsigned long *)0x4004002C))
#define CAN0_IF1ARB1_R (*((volatile unsigned long *)0x40040030))
#define CAN0_IF1ARB2_R (*((volatile unsigned long *)0x40040034))
#define CAN0_IF1MCTL_R (*((volatile unsigned long *)0x40040038))
#define CAN0_IF1DA1_R (*((volatile unsigned long *)0x4004003C))
#define CAN0_IF1DA2_R (*((volatile unsigned long *)0x40040040))
#define CAN0_IF1DB1_R (*((volatile unsigned long *)0x40040044))
#define CAN0_IF1DB2_R (*((volatile unsigned long *)0x40040048))
#define CAN0_IF2CRQ_R (*((volatile unsigned long *)0x40040080))
#define CAN0_IF2CMSK_R (*((volatile unsigned long *)0x40040084))
#define CAN0_IF2MSK1_R (*((volatile unsigned long *)0x40040088))
#define CAN0_IF2MSK2_R (*((volatile unsigned long *)0x4004008C))
#define CAN0_IF2ARB1_R (*((volatile unsigned long *)0x40040090))
#define CAN0_IF2ARB2_R (*((volatile unsigned long *)0x40040094))
#define CAN0_IF2MCTL_R (*((volatile unsigned long *)0x40040098))
#define CAN0_IF2DA1_R (*((volatile unsigned long *)0x4004009C))
#define CAN0_IF2DA2_R (*((volatile unsigned long *)0x400400A0))
#define CAN0_IF2DB1_R (*((volatile unsigned long *)0x400400A4))
#define CAN0_IF2DB2_R (*((volatile unsigned long *)0x400400A8))
#define CAN0_TXRQ1_R (*((volatile unsigned long *)0x40040100))
#define CAN0_TXRQ2_R (*((volatile unsigned long *)0x40040104))
#define CAN0_NWDA1_R (*((volatile unsigned long *)0x40040120))
#define CAN0_NWDA2_R (*((volatile unsigned long *)0x40040124))
#define CAN0_MSG1INT_R (*((volatile unsigned long *)0x40040140))
#define CAN0_MSG2INT_R (*((volatile unsigned long *)0x40040144))
#define CAN0_MSG1VAL_R (*((volatile unsigned long *)0x40040160))
#define CAN0_MSG2VAL_R (*((volatile unsigned long *)0x40040164))
//*****************************************************************************
//
// Ethernet MAC registers (MAC)
//
//*****************************************************************************
#define MAC_RIS_R (*((volatile unsigned long *)0x40048000))
#define MAC_IACK_R (*((volatile unsigned long *)0x40048000))
#define MAC_IM_R (*((volatile unsigned long *)0x40048004))
#define MAC_RCTL_R (*((volatile unsigned long *)0x40048008))
#define MAC_TCTL_R (*((volatile unsigned long *)0x4004800C))
#define MAC_DATA_R (*((volatile unsigned long *)0x40048010))
#define MAC_IA0_R (*((volatile unsigned long *)0x40048014))
#define MAC_IA1_R (*((volatile unsigned long *)0x40048018))
#define MAC_THR_R (*((volatile unsigned long *)0x4004801C))
#define MAC_MCTL_R (*((volatile unsigned long *)0x40048020))
#define MAC_MDV_R (*((volatile unsigned long *)0x40048024))
#define MAC_MTXD_R (*((volatile unsigned long *)0x4004802C))
#define MAC_MRXD_R (*((volatile unsigned long *)0x40048030))
#define MAC_NP_R (*((volatile unsigned long *)0x40048034))
#define MAC_TR_R (*((volatile unsigned long *)0x40048038))
#define MAC_TS_R (*((volatile unsigned long *)0x4004803C))
//*****************************************************************************
//
// Ethernet Controller PHY registers (MAC)
//
//*****************************************************************************
#define PHY_MR0 0x00000000 // Ethernet PHY Management Register
// 0 - Control
#define PHY_MR1 0x00000001 // Ethernet PHY Management Register
// 1 - Status
#define PHY_MR2 0x00000002 // Ethernet PHY Management Register
// 2 - PHY Identifier 1
#define PHY_MR3 0x00000003 // Ethernet PHY Management Register
// 3 - PHY Identifier 2
#define PHY_MR4 0x00000004 // Ethernet PHY Management Register
// 4 - Auto-Negotiation
// Advertisement
#define PHY_MR5 0x00000005 // Ethernet PHY Management Register
// 5 - Auto-Negotiation Link
// Partner Base Page Ability
#define PHY_MR6 0x00000006 // Ethernet PHY Management Register
// 6 - Auto-Negotiation Expansion
#define PHY_MR16 0x00000010 // Ethernet PHY Management Register
// 16 - Vendor-Specific
#define PHY_MR17 0x00000011 // Ethernet PHY Management Register
// 17 - Mode Control/Status
#define PHY_MR18 0x00000012 // Ethernet PHY Management Register
// 18 - Diagnostic
#define PHY_MR19 0x00000013 // Ethernet PHY Management Register
// 19 - Transceiver Control
#define PHY_MR23 0x00000017 // Ethernet PHY Management Register
// 23 - LED Configuration
#define PHY_MR24 0x00000018 // Ethernet PHY Management Register
// 24 -MDI/MDIX Control
//*****************************************************************************
//
// Hibernation module registers (HIB)
//
//*****************************************************************************
#define HIB_RTCC_R (*((volatile unsigned long *)0x400FC000))
#define HIB_RTCM0_R (*((volatile unsigned long *)0x400FC004))
#define HIB_RTCM1_R (*((volatile unsigned long *)0x400FC008))
#define HIB_RTCLD_R (*((volatile unsigned long *)0x400FC00C))
#define HIB_CTL_R (*((volatile unsigned long *)0x400FC010))
#define HIB_IM_R (*((volatile unsigned long *)0x400FC014))
#define HIB_RIS_R (*((volatile unsigned long *)0x400FC018))
#define HIB_MIS_R (*((volatile unsigned long *)0x400FC01C))
#define HIB_IC_R (*((volatile unsigned long *)0x400FC020))
#define HIB_RTCT_R (*((volatile unsigned long *)0x400FC024))
#define HIB_DATA_R (*((volatile unsigned long *)0x400FC030))
//*****************************************************************************
//
// FLASH registers (FLASH CTRL)
//
//*****************************************************************************
#define FLASH_FMA_R (*((volatile unsigned long *)0x400FD000))
#define FLASH_FMD_R (*((volatile unsigned long *)0x400FD004))
#define FLASH_FMC_R (*((volatile unsigned long *)0x400FD008))
#define FLASH_FCRIS_R (*((volatile unsigned long *)0x400FD00C))
#define FLASH_FCIM_R (*((volatile unsigned long *)0x400FD010))
#define FLASH_FCMISC_R (*((volatile unsigned long *)0x400FD014))
#define FLASH_USECRL_R (*((volatile unsigned long *)0x400FE140))
#define FLASH_USERDBG_R (*((volatile unsigned long *)0x400FE1D0))
#define FLASH_USERREG0_R (*((volatile unsigned long *)0x400FE1E0))
#define FLASH_USERREG1_R (*((volatile unsigned long *)0x400FE1E4))
#define FLASH_FMPRE0_R (*((volatile unsigned long *)0x400FE200))
#define FLASH_FMPRE1_R (*((volatile unsigned long *)0x400FE204))
#define FLASH_FMPRE2_R (*((volatile unsigned long *)0x400FE208))
#define FLASH_FMPRE3_R (*((volatile unsigned long *)0x400FE20C))
#define FLASH_FMPPE0_R (*((volatile unsigned long *)0x400FE400))
#define FLASH_FMPPE1_R (*((volatile unsigned long *)0x400FE404))
#define FLASH_FMPPE2_R (*((volatile unsigned long *)0x400FE408))
#define FLASH_FMPPE3_R (*((volatile unsigned long *)0x400FE40C))
//*****************************************************************************
//
// System Control registers (SYSCTL)
//
//*****************************************************************************
#define SYSCTL_DID0_R (*((volatile unsigned long *)0x400FE000))
#define SYSCTL_DID1_R (*((volatile unsigned long *)0x400FE004))
#define SYSCTL_DC0_R (*((volatile unsigned long *)0x400FE008))
#define SYSCTL_DC1_R (*((volatile unsigned long *)0x400FE010))
#define SYSCTL_DC2_R (*((volatile unsigned long *)0x400FE014))
#define SYSCTL_DC3_R (*((volatile unsigned long *)0x400FE018))
#define SYSCTL_DC4_R (*((volatile unsigned long *)0x400FE01C))
#define SYSCTL_PBORCTL_R (*((volatile unsigned long *)0x400FE030))
#define SYSCTL_LDOPCTL_R (*((volatile unsigned long *)0x400FE034))
#define SYSCTL_SRCR0_R (*((volatile unsigned long *)0x400FE040))
#define SYSCTL_SRCR1_R (*((volatile unsigned long *)0x400FE044))
#define SYSCTL_SRCR2_R (*((volatile unsigned long *)0x400FE048))
#define SYSCTL_RIS_R (*((volatile unsigned long *)0x400FE050))
#define SYSCTL_IMC_R (*((volatile unsigned long *)0x400FE054))
#define SYSCTL_MISC_R (*((volatile unsigned long *)0x400FE058))
#define SYSCTL_RESC_R (*((volatile unsigned long *)0x400FE05C))
#define SYSCTL_RCC_R (*((volatile unsigned long *)0x400FE060))
#define SYSCTL_PLLCFG_R (*((volatile unsigned long *)0x400FE064))
#define SYSCTL_RCC2_R (*((volatile unsigned long *)0x400FE070))
#define SYSCTL_RCGC0_R (*((volatile unsigned long *)0x400FE100))
#define SYSCTL_RCGC1_R (*((volatile unsigned long *)0x400FE104))
#define SYSCTL_RCGC2_R (*((volatile unsigned long *)0x400FE108))
#define SYSCTL_SCGC0_R (*((volatile unsigned long *)0x400FE110))
#define SYSCTL_SCGC1_R (*((volatile unsigned long *)0x400FE114))
#define SYSCTL_SCGC2_R (*((volatile unsigned long *)0x400FE118))
#define SYSCTL_DCGC0_R (*((volatile unsigned long *)0x400FE120))
#define SYSCTL_DCGC1_R (*((volatile unsigned long *)0x400FE124))
#define SYSCTL_DCGC2_R (*((volatile unsigned long *)0x400FE128))
#define SYSCTL_DSLPCLKCFG_R (*((volatile unsigned long *)0x400FE144))
//*****************************************************************************
//
// NVIC registers (NVIC)
//
//*****************************************************************************
#define NVIC_INT_TYPE_R (*((volatile unsigned long *)0xE000E004))
#define NVIC_ST_CTRL_R (*((volatile unsigned long *)0xE000E010))
#define NVIC_ST_RELOAD_R (*((volatile unsigned long *)0xE000E014))
#define NVIC_ST_CURRENT_R (*((volatile unsigned long *)0xE000E018))
#define NVIC_ST_CAL_R (*((volatile unsigned long *)0xE000E01C))
#define NVIC_EN0_R (*((volatile unsigned long *)0xE000E100))
#define NVIC_EN1_R (*((volatile unsigned long *)0xE000E104))
#define NVIC_DIS0_R (*((volatile unsigned long *)0xE000E180))
#define NVIC_DIS1_R (*((volatile unsigned long *)0xE000E184))
#define NVIC_PEND0_R (*((volatile unsigned long *)0xE000E200))
#define NVIC_PEND1_R (*((volatile unsigned long *)0xE000E204))
#define NVIC_UNPEND0_R (*((volatile unsigned long *)0xE000E280))
#define NVIC_UNPEND1_R (*((volatile unsigned long *)0xE000E284))
#define NVIC_ACTIVE0_R (*((volatile unsigned long *)0xE000E300))
#define NVIC_ACTIVE1_R (*((volatile unsigned long *)0xE000E304))
#define NVIC_PRI0_R (*((volatile unsigned long *)0xE000E400))
#define NVIC_PRI1_R (*((volatile unsigned long *)0xE000E404))
#define NVIC_PRI2_R (*((volatile unsigned long *)0xE000E408))
#define NVIC_PRI3_R (*((volatile unsigned long *)0xE000E40C))
#define NVIC_PRI4_R (*((volatile unsigned long *)0xE000E410))
#define NVIC_PRI5_R (*((volatile unsigned long *)0xE000E414))
#define NVIC_PRI6_R (*((volatile unsigned long *)0xE000E418))
#define NVIC_PRI7_R (*((volatile unsigned long *)0xE000E41C))
#define NVIC_PRI8_R (*((volatile unsigned long *)0xE000E420))
#define NVIC_PRI9_R (*((volatile unsigned long *)0xE000E424))
#define NVIC_PRI10_R (*((volatile unsigned long *)0xE000E428))
#define NVIC_CPUID_R (*((volatile unsigned long *)0xE000ED00))
#define NVIC_INT_CTRL_R (*((volatile unsigned long *)0xE000ED04))
#define NVIC_VTABLE_R (*((volatile unsigned long *)0xE000ED08))
#define NVIC_APINT_R (*((volatile unsigned long *)0xE000ED0C))
#define NVIC_SYS_CTRL_R (*((volatile unsigned long *)0xE000ED10))
#define NVIC_CFG_CTRL_R (*((volatile unsigned long *)0xE000ED14))
#define NVIC_SYS_PRI1_R (*((volatile unsigned long *)0xE000ED18))
#define NVIC_SYS_PRI2_R (*((volatile unsigned long *)0xE000ED1C))
#define NVIC_SYS_PRI3_R (*((volatile unsigned long *)0xE000ED20))
#define NVIC_SYS_HND_CTRL_R (*((volatile unsigned long *)0xE000ED24))
#define NVIC_FAULT_STAT_R (*((volatile unsigned long *)0xE000ED28))
#define NVIC_HFAULT_STAT_R (*((volatile unsigned long *)0xE000ED2C))
#define NVIC_DEBUG_STAT_R (*((volatile unsigned long *)0xE000ED30))
#define NVIC_MM_ADDR_R (*((volatile unsigned long *)0xE000ED34))
#define NVIC_FAULT_ADDR_R (*((volatile unsigned long *)0xE000ED38))
#define NVIC_MPU_TYPE_R (*((volatile unsigned long *)0xE000ED90))
#define NVIC_MPU_CTRL_R (*((volatile unsigned long *)0xE000ED94))
#define NVIC_MPU_NUMBER_R (*((volatile unsigned long *)0xE000ED98))
#define NVIC_MPU_BASE_R (*((volatile unsigned long *)0xE000ED9C))
#define NVIC_MPU_ATTR_R (*((volatile unsigned long *)0xE000EDA0))
#define NVIC_DBG_CTRL_R (*((volatile unsigned long *)0xE000EDF0))
#define NVIC_DBG_XFER_R (*((volatile unsigned long *)0xE000EDF4))
#define NVIC_DBG_DATA_R (*((volatile unsigned long *)0xE000EDF8))
#define NVIC_DBG_INT_R (*((volatile unsigned long *)0xE000EDFC))
#define NVIC_SW_TRIG_R (*((volatile unsigned long *)0xE000EF00))
//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_LOAD register.
//
//*****************************************************************************
#define WDT_LOAD_M 0xFFFFFFFF // Watchdog Load Value
#define WDT_LOAD_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_VALUE register.
//
//*****************************************************************************
#define WDT_VALUE_M 0xFFFFFFFF // Watchdog Value
#define WDT_VALUE_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_CTL register.
//
//*****************************************************************************
#define WDT_CTL_RESEN 0x00000002 // Watchdog Reset Enable
#define WDT_CTL_INTEN 0x00000001 // Watchdog Interrupt Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_ICR register.
//
//*****************************************************************************
#define WDT_ICR_M 0xFFFFFFFF // Watchdog Interrupt Clear
#define WDT_ICR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_RIS register.
//
//*****************************************************************************
#define WDT_RIS_WDTRIS 0x00000001 // Watchdog Raw Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_MIS register.
//
//*****************************************************************************
#define WDT_MIS_WDTMIS 0x00000001 // Watchdog Masked Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_TEST register.
//
//*****************************************************************************
#define WDT_TEST_STALL 0x00000100 // Watchdog Stall Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_LOCK register.
//
//*****************************************************************************
#define WDT_LOCK_M 0xFFFFFFFF // Watchdog Lock
#define WDT_LOCK_UNLOCKED 0x00000000 // Unlocked
#define WDT_LOCK_LOCKED 0x00000001 // Locked
#define WDT_LOCK_UNLOCK 0x1ACCE551 // Unlocks the watchdog timer
//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_LOCK register.
//
//*****************************************************************************
#define GPIO_LOCK_M 0xFFFFFFFF // GPIO Lock
#define GPIO_LOCK_UNLOCKED 0x00000000 // The GPIOCR register is unlocked
// and may be modified
#define GPIO_LOCK_LOCKED 0x00000001 // The GPIOCR register is locked
// and may not be modified
#define GPIO_LOCK_KEY 0x1ACCE551 // Unlocks the GPIO_CR register
//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_CR0 register.
//
//*****************************************************************************
#define SSI_CR0_SCR_M 0x0000FF00 // SSI Serial Clock Rate
#define SSI_CR0_SPH 0x00000080 // SSI Serial Clock Phase
#define SSI_CR0_SPO 0x00000040 // SSI Serial Clock Polarity
#define SSI_CR0_FRF_M 0x00000030 // SSI Frame Format Select
#define SSI_CR0_FRF_MOTO 0x00000000 // Freescale SPI Frame Format
#define SSI_CR0_FRF_TI 0x00000010 // Texas Instruments Synchronous
// Serial Frame Format
#define SSI_CR0_FRF_NMW 0x00000020 // MICROWIRE Frame Format
#define SSI_CR0_DSS_M 0x0000000F // SSI Data Size Select
#define SSI_CR0_DSS_4 0x00000003 // 4-bit data
#define SSI_CR0_DSS_5 0x00000004 // 5-bit data
#define SSI_CR0_DSS_6 0x00000005 // 6-bit data
#define SSI_CR0_DSS_7 0x00000006 // 7-bit data
#define SSI_CR0_DSS_8 0x00000007 // 8-bit data
#define SSI_CR0_DSS_9 0x00000008 // 9-bit data
#define SSI_CR0_DSS_10 0x00000009 // 10-bit data
#define SSI_CR0_DSS_11 0x0000000A // 11-bit data
#define SSI_CR0_DSS_12 0x0000000B // 12-bit data
#define SSI_CR0_DSS_13 0x0000000C // 13-bit data
#define SSI_CR0_DSS_14 0x0000000D // 14-bit data
#define SSI_CR0_DSS_15 0x0000000E // 15-bit data
#define SSI_CR0_DSS_16 0x0000000F // 16-bit data
#define SSI_CR0_SCR_S 8
//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_CR1 register.
//
//*****************************************************************************
#define SSI_CR1_SOD 0x00000008 // SSI Slave Mode Output Disable
#define SSI_CR1_MS 0x00000004 // SSI Master/Slave Select
#define SSI_CR1_SSE 0x00000002 // SSI Synchronous Serial Port
// Enable
#define SSI_CR1_LBM 0x00000001 // SSI Loopback Mode
//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_DR register.
//
//*****************************************************************************
#define SSI_DR_DATA_M 0x0000FFFF // SSI Receive/Transmit Data
#define SSI_DR_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_SR register.
//
//*****************************************************************************
#define SSI_SR_BSY 0x00000010 // SSI Busy Bit
#define SSI_SR_RFF 0x00000008 // SSI Receive FIFO Full
#define SSI_SR_RNE 0x00000004 // SSI Receive FIFO Not Empty
#define SSI_SR_TNF 0x00000002 // SSI Transmit FIFO Not Full
#define SSI_SR_TFE 0x00000001 // SSI Transmit FIFO Empty
//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_CPSR register.
//
//*****************************************************************************
#define SSI_CPSR_CPSDVSR_M 0x000000FF // SSI Clock Prescale Divisor
#define SSI_CPSR_CPSDVSR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_IM register.
//
//*****************************************************************************
#define SSI_IM_TXIM 0x00000008 // SSI Transmit FIFO Interrupt Mask
#define SSI_IM_RXIM 0x00000004 // SSI Receive FIFO Interrupt Mask
#define SSI_IM_RTIM 0x00000002 // SSI Receive Time-Out Interrupt
// Mask
#define SSI_IM_RORIM 0x00000001 // SSI Receive Overrun Interrupt
// Mask
//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_RIS register.
//
//*****************************************************************************
#define SSI_RIS_TXRIS 0x00000008 // SSI Transmit FIFO Raw Interrupt
// Status
#define SSI_RIS_RXRIS 0x00000004 // SSI Receive FIFO Raw Interrupt
// Status
#define SSI_RIS_RTRIS 0x00000002 // SSI Receive Time-Out Raw
// Interrupt Status
#define SSI_RIS_RORRIS 0x00000001 // SSI Receive Overrun Raw
// Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_MIS register.
//
//*****************************************************************************
#define SSI_MIS_TXMIS 0x00000008 // SSI Transmit FIFO Masked
// Interrupt Status
#define SSI_MIS_RXMIS 0x00000004 // SSI Receive FIFO Masked
// Interrupt Status
#define SSI_MIS_RTMIS 0x00000002 // SSI Receive Time-Out Masked
// Interrupt Status
#define SSI_MIS_RORMIS 0x00000001 // SSI Receive Overrun Masked
// Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_ICR register.
//
//*****************************************************************************
#define SSI_ICR_RTIC 0x00000002 // SSI Receive Time-Out Interrupt
// Clear
#define SSI_ICR_RORIC 0x00000001 // SSI Receive Overrun Interrupt
// Clear
//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_DR register.
//
//*****************************************************************************
#define UART_DR_OE 0x00000800 // UART Overrun Error
#define UART_DR_BE 0x00000400 // UART Break Error
#define UART_DR_PE 0x00000200 // UART Parity Error
#define UART_DR_FE 0x00000100 // UART Framing Error
#define UART_DR_DATA_M 0x000000FF // Data Transmitted or Received
#define UART_DR_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_RSR register.
//
//*****************************************************************************
#define UART_RSR_OE 0x00000008 // UART Overrun Error
#define UART_RSR_BE 0x00000004 // UART Break Error
#define UART_RSR_PE 0x00000002 // UART Parity Error
#define UART_RSR_FE 0x00000001 // UART Framing Error
//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_ECR register.
//
//*****************************************************************************
#define UART_ECR_DATA_M 0x000000FF // Error Clear
#define UART_ECR_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_FR register.
//
//*****************************************************************************
#define UART_FR_TXFE 0x00000080 // UART Transmit FIFO Empty
#define UART_FR_RXFF 0x00000040 // UART Receive FIFO Full
#define UART_FR_TXFF 0x00000020 // UART Transmit FIFO Full
#define UART_FR_RXFE 0x00000010 // UART Receive FIFO Empty
#define UART_FR_BUSY 0x00000008 // UART Busy
//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_ILPR register.
//
//*****************************************************************************
#define UART_ILPR_ILPDVSR_M 0x000000FF // IrDA Low-Power Divisor
#define UART_ILPR_ILPDVSR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_IBRD register.
//
//*****************************************************************************
#define UART_IBRD_DIVINT_M 0x0000FFFF // Integer Baud-Rate Divisor
#define UART_IBRD_DIVINT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_FBRD register.
//
//*****************************************************************************
#define UART_FBRD_DIVFRAC_M 0x0000003F // Fractional Baud-Rate Divisor
#define UART_FBRD_DIVFRAC_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_LCRH register.
//
//*****************************************************************************
#define UART_LCRH_SPS 0x00000080 // UART Stick Parity Select
#define UART_LCRH_WLEN_M 0x00000060 // UART Word Length
#define UART_LCRH_WLEN_5 0x00000000 // 5 bits (default)
#define UART_LCRH_WLEN_6 0x00000020 // 6 bits
#define UART_LCRH_WLEN_7 0x00000040 // 7 bits
#define UART_LCRH_WLEN_8 0x00000060 // 8 bits
#define UART_LCRH_FEN 0x00000010 // UART Enable FIFOs
#define UART_LCRH_STP2 0x00000008 // UART Two Stop Bits Select
#define UART_LCRH_EPS 0x00000004 // UART Even Parity Select
#define UART_LCRH_PEN 0x00000002 // UART Parity Enable
#define UART_LCRH_BRK 0x00000001 // UART Send Break
//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_CTL register.
//
//*****************************************************************************
#define UART_CTL_RXE 0x00000200 // UART Receive Enable
#define UART_CTL_TXE 0x00000100 // UART Transmit Enable
#define UART_CTL_LBE 0x00000080 // UART Loop Back Enable
#define UART_CTL_SIRLP 0x00000004 // UART SIR Low-Power Mode
#define UART_CTL_SIREN 0x00000002 // UART SIR Enable
#define UART_CTL_UARTEN 0x00000001 // UART Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_IFLS register.
//
//*****************************************************************************
#define UART_IFLS_RX_M 0x00000038 // UART Receive Interrupt FIFO
// Level Select
#define UART_IFLS_RX1_8 0x00000000 // RX FIFO >= 1/8 full
#define UART_IFLS_RX2_8 0x00000008 // RX FIFO >= 1/4 full
#define UART_IFLS_RX4_8 0x00000010 // RX FIFO >= 1/2 full (default)
#define UART_IFLS_RX6_8 0x00000018 // RX FIFO >= 3/4 full
#define UART_IFLS_RX7_8 0x00000020 // RX FIFO >= 7/8 full
#define UART_IFLS_TX_M 0x00000007 // UART Transmit Interrupt FIFO
// Level Select
#define UART_IFLS_TX1_8 0x00000000 // TX FIFO <= 1/8 full
#define UART_IFLS_TX2_8 0x00000001 // TX FIFO <= 1/4 full
#define UART_IFLS_TX4_8 0x00000002 // TX FIFO <= 1/2 full (default)
#define UART_IFLS_TX6_8 0x00000003 // TX FIFO <= 3/4 full
#define UART_IFLS_TX7_8 0x00000004 // TX FIFO <= 7/8 full
//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_IM register.
//
//*****************************************************************************
#define UART_IM_OEIM 0x00000400 // UART Overrun Error Interrupt
// Mask
#define UART_IM_BEIM 0x00000200 // UART Break Error Interrupt Mask
#define UART_IM_PEIM 0x00000100 // UART Parity Error Interrupt Mask
#define UART_IM_FEIM 0x00000080 // UART Framing Error Interrupt
// Mask
#define UART_IM_RTIM 0x00000040 // UART Receive Time-Out Interrupt
// Mask
#define UART_IM_TXIM 0x00000020 // UART Transmit Interrupt Mask
#define UART_IM_RXIM 0x00000010 // UART Receive Interrupt Mask
//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_RIS register.
//
//*****************************************************************************
#define UART_RIS_OERIS 0x00000400 // UART Overrun Error Raw Interrupt
// Status
#define UART_RIS_BERIS 0x00000200 // UART Break Error Raw Interrupt
// Status
#define UART_RIS_PERIS 0x00000100 // UART Parity Error Raw Interrupt
// Status
#define UART_RIS_FERIS 0x00000080 // UART Framing Error Raw Interrupt
// Status
#define UART_RIS_RTRIS 0x00000040 // UART Receive Time-Out Raw
// Interrupt Status
#define UART_RIS_TXRIS 0x00000020 // UART Transmit Raw Interrupt
// Status
#define UART_RIS_RXRIS 0x00000010 // UART Receive Raw Interrupt
// Status
//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_MIS register.
//
//*****************************************************************************
#define UART_MIS_OEMIS 0x00000400 // UART Overrun Error Masked
// Interrupt Status
#define UART_MIS_BEMIS 0x00000200 // UART Break Error Masked
// Interrupt Status
#define UART_MIS_PEMIS 0x00000100 // UART Parity Error Masked
// Interrupt Status
#define UART_MIS_FEMIS 0x00000080 // UART Framing Error Masked
// Interrupt Status
#define UART_MIS_RTMIS 0x00000040 // UART Receive Time-Out Masked
// Interrupt Status
#define UART_MIS_TXMIS 0x00000020 // UART Transmit Masked Interrupt
// Status
#define UART_MIS_RXMIS 0x00000010 // UART Receive Masked Interrupt
// Status
//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_ICR register.
//
//*****************************************************************************
#define UART_ICR_OEIC 0x00000400 // Overrun Error Interrupt Clear
#define UART_ICR_BEIC 0x00000200 // Break Error Interrupt Clear
#define UART_ICR_PEIC 0x00000100 // Parity Error Interrupt Clear
#define UART_ICR_FEIC 0x00000080 // Framing Error Interrupt Clear
#define UART_ICR_RTIC 0x00000040 // Receive Time-Out Interrupt Clear
#define UART_ICR_TXIC 0x00000020 // Transmit Interrupt Clear
#define UART_ICR_RXIC 0x00000010 // Receive Interrupt Clear
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_MSA register.
//
//*****************************************************************************
#define I2C_MSA_SA_M 0x000000FE // I2C Slave Address
#define I2C_MSA_RS 0x00000001 // Receive not send
#define I2C_MSA_SA_S 1
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_SOAR register.
//
//*****************************************************************************
#define I2C_SOAR_OAR_M 0x0000007F // I2C Slave Own Address
#define I2C_SOAR_OAR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_SCSR register.
//
//*****************************************************************************
#define I2C_SCSR_FBR 0x00000004 // First Byte Received
#define I2C_SCSR_TREQ 0x00000002 // Transmit Request
#define I2C_SCSR_DA 0x00000001 // Device Active
#define I2C_SCSR_RREQ 0x00000001 // Receive Request
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_MCS register.
//
//*****************************************************************************
#define I2C_MCS_BUSBSY 0x00000040 // Bus Busy
#define I2C_MCS_IDLE 0x00000020 // I2C Idle
#define I2C_MCS_ARBLST 0x00000010 // Arbitration Lost
#define I2C_MCS_ACK 0x00000008 // Data Acknowledge Enable
#define I2C_MCS_DATACK 0x00000008 // Acknowledge Data
#define I2C_MCS_ADRACK 0x00000004 // Acknowledge Address
#define I2C_MCS_STOP 0x00000004 // Generate STOP
#define I2C_MCS_START 0x00000002 // Generate START
#define I2C_MCS_ERROR 0x00000002 // Error
#define I2C_MCS_RUN 0x00000001 // I2C Master Enable
#define I2C_MCS_BUSY 0x00000001 // I2C Busy
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_SDR register.
//
//*****************************************************************************
#define I2C_SDR_DATA_M 0x000000FF // Data for Transfer
#define I2C_SDR_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_MDR register.
//
//*****************************************************************************
#define I2C_MDR_DATA_M 0x000000FF // Data Transferred
#define I2C_MDR_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_MTPR register.
//
//*****************************************************************************
#define I2C_MTPR_TPR_M 0x0000007F // SCL Clock Period
#define I2C_MTPR_TPR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_SIMR register.
//
//*****************************************************************************
#define I2C_SIMR_DATAIM 0x00000001 // Data Interrupt Mask
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_SRIS register.
//
//*****************************************************************************
#define I2C_SRIS_DATARIS 0x00000001 // Data Raw Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_MIMR register.
//
//*****************************************************************************
#define I2C_MIMR_IM 0x00000001 // Interrupt Mask
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_MRIS register.
//
//*****************************************************************************
#define I2C_MRIS_RIS 0x00000001 // Raw Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_SMIS register.
//
//*****************************************************************************
#define I2C_SMIS_DATAMIS 0x00000001 // Data Masked Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_SICR register.
//
//*****************************************************************************
#define I2C_SICR_DATAIC 0x00000001 // Data Interrupt Clear
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_MMIS register.
//
//*****************************************************************************
#define I2C_MMIS_MIS 0x00000001 // Masked Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_MICR register.
//
//*****************************************************************************
#define I2C_MICR_IC 0x00000001 // Interrupt Clear
//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_MCR register.
//
//*****************************************************************************
#define I2C_MCR_SFE 0x00000020 // I2C Slave Function Enable
#define I2C_MCR_MFE 0x00000010 // I2C Master Function Enable
#define I2C_MCR_LPBK 0x00000001 // I2C Loopback
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_CTL register.
//
//*****************************************************************************
#define PWM_CTL_GLOBALSYNC2 0x00000004 // Update PWM Generator 2
#define PWM_CTL_GLOBALSYNC1 0x00000002 // Update PWM Generator 1
#define PWM_CTL_GLOBALSYNC0 0x00000001 // Update PWM Generator 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_SYNC register.
//
//*****************************************************************************
#define PWM_SYNC_SYNC2 0x00000004 // Reset Generator 2 Counter
#define PWM_SYNC_SYNC1 0x00000002 // Reset Generator 1 Counter
#define PWM_SYNC_SYNC0 0x00000001 // Reset Generator 0 Counter
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_ENABLE register.
//
//*****************************************************************************
#define PWM_ENABLE_PWM5EN 0x00000020 // PWM5 Output Enable
#define PWM_ENABLE_PWM4EN 0x00000010 // PWM4 Output Enable
#define PWM_ENABLE_PWM3EN 0x00000008 // PWM3 Output Enable
#define PWM_ENABLE_PWM2EN 0x00000004 // PWM2 Output Enable
#define PWM_ENABLE_PWM1EN 0x00000002 // PWM1 Output Enable
#define PWM_ENABLE_PWM0EN 0x00000001 // PWM0 Output Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_INVERT register.
//
//*****************************************************************************
#define PWM_INVERT_PWM5INV 0x00000020 // Invert PWM5 Signal
#define PWM_INVERT_PWM4INV 0x00000010 // Invert PWM4 Signal
#define PWM_INVERT_PWM3INV 0x00000008 // Invert PWM3 Signal
#define PWM_INVERT_PWM2INV 0x00000004 // Invert PWM2 Signal
#define PWM_INVERT_PWM1INV 0x00000002 // Invert PWM1 Signal
#define PWM_INVERT_PWM0INV 0x00000001 // Invert PWM0 Signal
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_FAULT register.
//
//*****************************************************************************
#define PWM_FAULT_FAULT5 0x00000020 // PWM5 Fault
#define PWM_FAULT_FAULT4 0x00000010 // PWM4 Fault
#define PWM_FAULT_FAULT3 0x00000008 // PWM3 Fault
#define PWM_FAULT_FAULT2 0x00000004 // PWM2 Fault
#define PWM_FAULT_FAULT1 0x00000002 // PWM1 Fault
#define PWM_FAULT_FAULT0 0x00000001 // PWM0 Fault
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_INTEN register.
//
//*****************************************************************************
#define PWM_INTEN_INTFAULT 0x00010000 // Fault Interrupt Enable
#define PWM_INTEN_INTPWM2 0x00000004 // PWM2 Interrupt Enable
#define PWM_INTEN_INTPWM1 0x00000002 // PWM1 Interrupt Enable
#define PWM_INTEN_INTPWM0 0x00000001 // PWM0 Interrupt Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_RIS register.
//
//*****************************************************************************
#define PWM_RIS_INTFAULT 0x00010000 // Fault Interrupt Asserted
#define PWM_RIS_INTPWM2 0x00000004 // PWM2 Interrupt Asserted
#define PWM_RIS_INTPWM1 0x00000002 // PWM1 Interrupt Asserted
#define PWM_RIS_INTPWM0 0x00000001 // PWM0 Interrupt Asserted
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_ISC register.
//
//*****************************************************************************
#define PWM_ISC_INTFAULT 0x00010000 // Fault Interrupt Asserted
#define PWM_ISC_INTPWM2 0x00000004 // PWM2 Interrupt Status
#define PWM_ISC_INTPWM1 0x00000002 // PWM1 Interrupt Status
#define PWM_ISC_INTPWM0 0x00000001 // PWM0 Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_STATUS register.
//
//*****************************************************************************
#define PWM_STATUS_FAULT 0x00000001 // Fault Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_X_CTL register.
//
//*****************************************************************************
#define PWM_X_CTL_CMPBUPD 0x00000020 // Comparator B Update Mode
#define PWM_X_CTL_CMPAUPD 0x00000010 // Comparator A Update Mode
#define PWM_X_CTL_LOADUPD 0x00000008 // Load Register Update Mode
#define PWM_X_CTL_DEBUG 0x00000004 // Debug Mode
#define PWM_X_CTL_MODE 0x00000002 // Counter Mode
#define PWM_X_CTL_ENABLE 0x00000001 // PWM Block Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_X_INTEN register.
//
//*****************************************************************************
#define PWM_X_INTEN_TRCMPBD 0x00002000 // Trigger for Counter=PWMnCMPB
// Down
#define PWM_X_INTEN_TRCMPBU 0x00001000 // Trigger for Counter=PWMnCMPB Up
#define PWM_X_INTEN_TRCMPAD 0x00000800 // Trigger for Counter=PWMnCMPA
// Down
#define PWM_X_INTEN_TRCMPAU 0x00000400 // Trigger for Counter=PWMnCMPA Up
#define PWM_X_INTEN_TRCNTLOAD 0x00000200 // Trigger for Counter=PWMnLOAD
#define PWM_X_INTEN_TRCNTZERO 0x00000100 // Trigger for Counter=0
#define PWM_X_INTEN_INTCMPBD 0x00000020 // Interrupt for Counter=PWMnCMPB
// Down
#define PWM_X_INTEN_INTCMPBU 0x00000010 // Interrupt for Counter=PWMnCMPB
// Up
#define PWM_X_INTEN_INTCMPAD 0x00000008 // Interrupt for Counter=PWMnCMPA
// Down
#define PWM_X_INTEN_INTCMPAU 0x00000004 // Interrupt for Counter=PWMnCMPA
// Up
#define PWM_X_INTEN_INTCNTLOAD 0x00000002 // Interrupt for Counter=PWMnLOAD
#define PWM_X_INTEN_INTCNTZERO 0x00000001 // Interrupt for Counter=0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_X_RIS register.
//
//*****************************************************************************
#define PWM_X_RIS_INTCMPBD 0x00000020 // Comparator B Down Interrupt
// Status
#define PWM_X_RIS_INTCMPBU 0x00000010 // Comparator B Up Interrupt Status
#define PWM_X_RIS_INTCMPAD 0x00000008 // Comparator A Down Interrupt
// Status
#define PWM_X_RIS_INTCMPAU 0x00000004 // Comparator A Up Interrupt Status
#define PWM_X_RIS_INTCNTLOAD 0x00000002 // Counter=Load Interrupt Status
#define PWM_X_RIS_INTCNTZERO 0x00000001 // Counter=0 Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_X_ISC register.
//
//*****************************************************************************
#define PWM_X_ISC_INTCMPBD 0x00000020 // Comparator B Down Interrupt
#define PWM_X_ISC_INTCMPBU 0x00000010 // Comparator B Up Interrupt
#define PWM_X_ISC_INTCMPAD 0x00000008 // Comparator A Down Interrupt
#define PWM_X_ISC_INTCMPAU 0x00000004 // Comparator A Up Interrupt
#define PWM_X_ISC_INTCNTLOAD 0x00000002 // Counter=Load Interrupt
#define PWM_X_ISC_INTCNTZERO 0x00000001 // Counter=0 Interrupt
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_X_LOAD register.
//
//*****************************************************************************
#define PWM_X_LOAD_M 0x0000FFFF // Counter Load Value
#define PWM_X_LOAD_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_X_COUNT register.
//
//*****************************************************************************
#define PWM_X_COUNT_M 0x0000FFFF // Counter Value
#define PWM_X_COUNT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_X_CMPA register.
//
//*****************************************************************************
#define PWM_X_CMPA_M 0x0000FFFF // Comparator A Value
#define PWM_X_CMPA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_X_CMPB register.
//
//*****************************************************************************
#define PWM_X_CMPB_M 0x0000FFFF // Comparator B Value
#define PWM_X_CMPB_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_X_GENA register.
//
//*****************************************************************************
#define PWM_X_GENA_ACTCMPBD_M 0x00000C00 // Action for Comparator B Down
#define PWM_X_GENA_ACTCMPBD_NONE \
0x00000000 // Do nothing
#define PWM_X_GENA_ACTCMPBD_INV 0x00000400 // Invert pwmA
#define PWM_X_GENA_ACTCMPBD_ZERO \
0x00000800 // Drive pwmA Low
#define PWM_X_GENA_ACTCMPBD_ONE 0x00000C00 // Drive pwmA High
#define PWM_X_GENA_ACTCMPBU_M 0x00000300 // Action for Comparator B Up
#define PWM_X_GENA_ACTCMPBU_NONE \
0x00000000 // Do nothing
#define PWM_X_GENA_ACTCMPBU_INV 0x00000100 // Invert pwmA
#define PWM_X_GENA_ACTCMPBU_ZERO \
0x00000200 // Drive pwmA Low
#define PWM_X_GENA_ACTCMPBU_ONE 0x00000300 // Drive pwmA High
#define PWM_X_GENA_ACTCMPAD_M 0x000000C0 // Action for Comparator A Down
#define PWM_X_GENA_ACTCMPAD_NONE \
0x00000000 // Do nothing
#define PWM_X_GENA_ACTCMPAD_INV 0x00000040 // Invert pwmA
#define PWM_X_GENA_ACTCMPAD_ZERO \
0x00000080 // Drive pwmA Low
#define PWM_X_GENA_ACTCMPAD_ONE 0x000000C0 // Drive pwmA High
#define PWM_X_GENA_ACTCMPAU_M 0x00000030 // Action for Comparator A Up
#define PWM_X_GENA_ACTCMPAU_NONE \
0x00000000 // Do nothing
#define PWM_X_GENA_ACTCMPAU_INV 0x00000010 // Invert pwmA
#define PWM_X_GENA_ACTCMPAU_ZERO \
0x00000020 // Drive pwmA Low
#define PWM_X_GENA_ACTCMPAU_ONE 0x00000030 // Drive pwmA High
#define PWM_X_GENA_ACTLOAD_M 0x0000000C // Action for Counter=LOAD
#define PWM_X_GENA_ACTLOAD_NONE 0x00000000 // Do nothing
#define PWM_X_GENA_ACTLOAD_INV 0x00000004 // Invert pwmA
#define PWM_X_GENA_ACTLOAD_ZERO 0x00000008 // Drive pwmA Low
#define PWM_X_GENA_ACTLOAD_ONE 0x0000000C // Drive pwmA High
#define PWM_X_GENA_ACTZERO_M 0x00000003 // Action for Counter=0
#define PWM_X_GENA_ACTZERO_NONE 0x00000000 // Do nothing
#define PWM_X_GENA_ACTZERO_INV 0x00000001 // Invert pwmA
#define PWM_X_GENA_ACTZERO_ZERO 0x00000002 // Drive pwmA Low
#define PWM_X_GENA_ACTZERO_ONE 0x00000003 // Drive pwmA High
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_X_GENB register.
//
//*****************************************************************************
#define PWM_X_GENB_ACTCMPBD_M 0x00000C00 // Action for Comparator B Down
#define PWM_X_GENB_ACTCMPBD_NONE \
0x00000000 // Do nothing
#define PWM_X_GENB_ACTCMPBD_INV 0x00000400 // Invert pwmB
#define PWM_X_GENB_ACTCMPBD_ZERO \
0x00000800 // Drive pwmB Low
#define PWM_X_GENB_ACTCMPBD_ONE 0x00000C00 // Drive pwmB High
#define PWM_X_GENB_ACTCMPBU_M 0x00000300 // Action for Comparator B Up
#define PWM_X_GENB_ACTCMPBU_NONE \
0x00000000 // Do nothing
#define PWM_X_GENB_ACTCMPBU_INV 0x00000100 // Invert pwmB
#define PWM_X_GENB_ACTCMPBU_ZERO \
0x00000200 // Drive pwmB Low
#define PWM_X_GENB_ACTCMPBU_ONE 0x00000300 // Drive pwmB High
#define PWM_X_GENB_ACTCMPAD_M 0x000000C0 // Action for Comparator A Down
#define PWM_X_GENB_ACTCMPAD_NONE \
0x00000000 // Do nothing
#define PWM_X_GENB_ACTCMPAD_INV 0x00000040 // Invert pwmB
#define PWM_X_GENB_ACTCMPAD_ZERO \
0x00000080 // Drive pwmB Low
#define PWM_X_GENB_ACTCMPAD_ONE 0x000000C0 // Drive pwmB High
#define PWM_X_GENB_ACTCMPAU_M 0x00000030 // Action for Comparator A Up
#define PWM_X_GENB_ACTCMPAU_NONE \
0x00000000 // Do nothing
#define PWM_X_GENB_ACTCMPAU_INV 0x00000010 // Invert pwmB
#define PWM_X_GENB_ACTCMPAU_ZERO \
0x00000020 // Drive pwmB Low
#define PWM_X_GENB_ACTCMPAU_ONE 0x00000030 // Drive pwmB High
#define PWM_X_GENB_ACTLOAD_M 0x0000000C // Action for Counter=LOAD
#define PWM_X_GENB_ACTLOAD_NONE 0x00000000 // Do nothing
#define PWM_X_GENB_ACTLOAD_INV 0x00000004 // Invert pwmB
#define PWM_X_GENB_ACTLOAD_ZERO 0x00000008 // Drive pwmB Low
#define PWM_X_GENB_ACTLOAD_ONE 0x0000000C // Drive pwmB High
#define PWM_X_GENB_ACTZERO_M 0x00000003 // Action for Counter=0
#define PWM_X_GENB_ACTZERO_NONE 0x00000000 // Do nothing
#define PWM_X_GENB_ACTZERO_INV 0x00000001 // Invert pwmB
#define PWM_X_GENB_ACTZERO_ZERO 0x00000002 // Drive pwmB Low
#define PWM_X_GENB_ACTZERO_ONE 0x00000003 // Drive pwmB High
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_X_DBCTL register.
//
//*****************************************************************************
#define PWM_X_DBCTL_ENABLE 0x00000001 // Dead-Band Generator Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_X_DBRISE register.
//
//*****************************************************************************
#define PWM_X_DBRISE_DELAY_M 0x00000FFF // Dead-Band Rise Delay
#define PWM_X_DBRISE_DELAY_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PWM_O_X_DBFALL register.
//
//*****************************************************************************
#define PWM_X_DBFALL_DELAY_M 0x00000FFF // Dead-Band Fall Delay
#define PWM_X_DBFALL_DELAY_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the QEI_O_CTL register.
//
//*****************************************************************************
#define QEI_CTL_STALLEN 0x00001000 // Stall QEI
#define QEI_CTL_INVI 0x00000800 // Invert Index Pulse
#define QEI_CTL_INVB 0x00000400 // Invert PhB
#define QEI_CTL_INVA 0x00000200 // Invert PhA
#define QEI_CTL_VELDIV_M 0x000001C0 // Predivide Velocity
#define QEI_CTL_VELDIV_1 0x00000000 // QEI clock /1
#define QEI_CTL_VELDIV_2 0x00000040 // QEI clock /2
#define QEI_CTL_VELDIV_4 0x00000080 // QEI clock /4
#define QEI_CTL_VELDIV_8 0x000000C0 // QEI clock /8
#define QEI_CTL_VELDIV_16 0x00000100 // QEI clock /16
#define QEI_CTL_VELDIV_32 0x00000140 // QEI clock /32
#define QEI_CTL_VELDIV_64 0x00000180 // QEI clock /64
#define QEI_CTL_VELDIV_128 0x000001C0 // QEI clock /128
#define QEI_CTL_VELEN 0x00000020 // Capture Velocity
#define QEI_CTL_RESMODE 0x00000010 // Reset Mode
#define QEI_CTL_CAPMODE 0x00000008 // Capture Mode
#define QEI_CTL_SIGMODE 0x00000004 // Signal Mode
#define QEI_CTL_SWAP 0x00000002 // Swap Signals
#define QEI_CTL_ENABLE 0x00000001 // Enable QEI
//*****************************************************************************
//
// The following are defines for the bit fields in the QEI_O_STAT register.
//
//*****************************************************************************
#define QEI_STAT_DIRECTION 0x00000002 // Direction of Rotation
#define QEI_STAT_ERROR 0x00000001 // Error Detected
//*****************************************************************************
//
// The following are defines for the bit fields in the QEI_O_POS register.
//
//*****************************************************************************
#define QEI_POS_M 0xFFFFFFFF // Current Position Integrator
// Value
#define QEI_POS_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the QEI_O_MAXPOS register.
//
//*****************************************************************************
#define QEI_MAXPOS_M 0xFFFFFFFF // Maximum Position Integrator
// Value
#define QEI_MAXPOS_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the QEI_O_LOAD register.
//
//*****************************************************************************
#define QEI_LOAD_M 0xFFFFFFFF // Velocity Timer Load Value
#define QEI_LOAD_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the QEI_O_TIME register.
//
//*****************************************************************************
#define QEI_TIME_M 0xFFFFFFFF // Velocity Timer Current Value
#define QEI_TIME_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the QEI_O_COUNT register.
//
//*****************************************************************************
#define QEI_COUNT_M 0xFFFFFFFF // Velocity Pulse Count
#define QEI_COUNT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the QEI_O_SPEED register.
//
//*****************************************************************************
#define QEI_SPEED_M 0xFFFFFFFF // Velocity
#define QEI_SPEED_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the QEI_O_INTEN register.
//
//*****************************************************************************
#define QEI_INTEN_ERROR 0x00000008 // Phase Error Interrupt Enable
#define QEI_INTEN_DIR 0x00000004 // Direction Change Interrupt
// Enable
#define QEI_INTEN_TIMER 0x00000002 // Timer Expires Interrupt Enable
#define QEI_INTEN_INDEX 0x00000001 // Index Pulse Detected Interrupt
// Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the QEI_O_RIS register.
//
//*****************************************************************************
#define QEI_RIS_ERROR 0x00000008 // Phase Error Detected
#define QEI_RIS_DIR 0x00000004 // Direction Change Detected
#define QEI_RIS_TIMER 0x00000002 // Velocity Timer Expired
#define QEI_RIS_INDEX 0x00000001 // Index Pulse Asserted
//*****************************************************************************
//
// The following are defines for the bit fields in the QEI_O_ISC register.
//
//*****************************************************************************
#define QEI_ISC_ERROR 0x00000008 // Phase Error Interrupt
#define QEI_ISC_DIR 0x00000004 // Direction Change Interrupt
#define QEI_ISC_TIMER 0x00000002 // Velocity Timer Expired Interrupt
#define QEI_ISC_INDEX 0x00000001 // Index Pulse Interrupt
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_CFG register.
//
//*****************************************************************************
#define TIMER_CFG_M 0x00000007 // GPTM Configuration
#define TIMER_CFG_32_BIT_TIMER 0x00000000 // 32-bit timer configuration
#define TIMER_CFG_32_BIT_RTC 0x00000001 // 32-bit real-time clock (RTC)
// counter configuration
#define TIMER_CFG_16_BIT 0x00000004 // 16-bit timer configuration. The
// function is controlled by bits
// 1:0 of GPTMTAMR and GPTMTBMR
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TAMR register.
//
//*****************************************************************************
#define TIMER_TAMR_TAAMS 0x00000008 // GPTM Timer A Alternate Mode
// Select
#define TIMER_TAMR_TACMR 0x00000004 // GPTM Timer A Capture Mode
#define TIMER_TAMR_TAMR_M 0x00000003 // GPTM Timer A Mode
#define TIMER_TAMR_TAMR_1_SHOT 0x00000001 // One-Shot Timer mode
#define TIMER_TAMR_TAMR_PERIOD 0x00000002 // Periodic Timer mode
#define TIMER_TAMR_TAMR_CAP 0x00000003 // Capture mode
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TBMR register.
//
//*****************************************************************************
#define TIMER_TBMR_TBAMS 0x00000008 // GPTM Timer B Alternate Mode
// Select
#define TIMER_TBMR_TBCMR 0x00000004 // GPTM Timer B Capture Mode
#define TIMER_TBMR_TBMR_M 0x00000003 // GPTM Timer B Mode
#define TIMER_TBMR_TBMR_1_SHOT 0x00000001 // One-Shot Timer mode
#define TIMER_TBMR_TBMR_PERIOD 0x00000002 // Periodic Timer mode
#define TIMER_TBMR_TBMR_CAP 0x00000003 // Capture mode
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_CTL register.
//
//*****************************************************************************
#define TIMER_CTL_TBPWML 0x00004000 // GPTM Timer B PWM Output Level
#define TIMER_CTL_TBOTE 0x00002000 // GPTM Timer B Output Trigger
// Enable
#define TIMER_CTL_TBEVENT_M 0x00000C00 // GPTM Timer B Event Mode
#define TIMER_CTL_TBEVENT_POS 0x00000000 // Positive edge
#define TIMER_CTL_TBEVENT_NEG 0x00000400 // Negative edge
#define TIMER_CTL_TBEVENT_BOTH 0x00000C00 // Both edges
#define TIMER_CTL_TBSTALL 0x00000200 // GPTM Timer B Stall Enable
#define TIMER_CTL_TBEN 0x00000100 // GPTM Timer B Enable
#define TIMER_CTL_TAPWML 0x00000040 // GPTM Timer A PWM Output Level
#define TIMER_CTL_TAOTE 0x00000020 // GPTM Timer A Output Trigger
// Enable
#define TIMER_CTL_RTCEN 0x00000010 // GPTM RTC Enable
#define TIMER_CTL_TAEVENT_M 0x0000000C // GPTM Timer A Event Mode
#define TIMER_CTL_TAEVENT_POS 0x00000000 // Positive edge
#define TIMER_CTL_TAEVENT_NEG 0x00000004 // Negative edge
#define TIMER_CTL_TAEVENT_BOTH 0x0000000C // Both edges
#define TIMER_CTL_TASTALL 0x00000002 // GPTM Timer A Stall Enable
#define TIMER_CTL_TAEN 0x00000001 // GPTM Timer A Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_IMR register.
//
//*****************************************************************************
#define TIMER_IMR_CBEIM 0x00000400 // GPTM Capture B Event Interrupt
// Mask
#define TIMER_IMR_CBMIM 0x00000200 // GPTM Capture B Match Interrupt
// Mask
#define TIMER_IMR_TBTOIM 0x00000100 // GPTM Timer B Time-Out Interrupt
// Mask
#define TIMER_IMR_RTCIM 0x00000008 // GPTM RTC Interrupt Mask
#define TIMER_IMR_CAEIM 0x00000004 // GPTM Capture A Event Interrupt
// Mask
#define TIMER_IMR_CAMIM 0x00000002 // GPTM Capture A Match Interrupt
// Mask
#define TIMER_IMR_TATOIM 0x00000001 // GPTM Timer A Time-Out Interrupt
// Mask
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_RIS register.
//
//*****************************************************************************
#define TIMER_RIS_CBERIS 0x00000400 // GPTM Capture B Event Raw
// Interrupt
#define TIMER_RIS_CBMRIS 0x00000200 // GPTM Capture B Match Raw
// Interrupt
#define TIMER_RIS_TBTORIS 0x00000100 // GPTM Timer B Time-Out Raw
// Interrupt
#define TIMER_RIS_RTCRIS 0x00000008 // GPTM RTC Raw Interrupt
#define TIMER_RIS_CAERIS 0x00000004 // GPTM Capture A Event Raw
// Interrupt
#define TIMER_RIS_CAMRIS 0x00000002 // GPTM Capture A Match Raw
// Interrupt
#define TIMER_RIS_TATORIS 0x00000001 // GPTM Timer A Time-Out Raw
// Interrupt
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_MIS register.
//
//*****************************************************************************
#define TIMER_MIS_CBEMIS 0x00000400 // GPTM Capture B Event Masked
// Interrupt
#define TIMER_MIS_CBMMIS 0x00000200 // GPTM Capture B Match Masked
// Interrupt
#define TIMER_MIS_TBTOMIS 0x00000100 // GPTM Timer B Time-Out Masked
// Interrupt
#define TIMER_MIS_RTCMIS 0x00000008 // GPTM RTC Masked Interrupt
#define TIMER_MIS_CAEMIS 0x00000004 // GPTM Capture A Event Masked
// Interrupt
#define TIMER_MIS_CAMMIS 0x00000002 // GPTM Capture A Match Masked
// Interrupt
#define TIMER_MIS_TATOMIS 0x00000001 // GPTM Timer A Time-Out Masked
// Interrupt
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_ICR register.
//
//*****************************************************************************
#define TIMER_ICR_CBECINT 0x00000400 // GPTM Capture B Event Interrupt
// Clear
#define TIMER_ICR_CBMCINT 0x00000200 // GPTM Capture B Match Interrupt
// Clear
#define TIMER_ICR_TBTOCINT 0x00000100 // GPTM Timer B Time-Out Interrupt
// Clear
#define TIMER_ICR_RTCCINT 0x00000008 // GPTM RTC Interrupt Clear
#define TIMER_ICR_CAECINT 0x00000004 // GPTM Capture A Event Interrupt
// Clear
#define TIMER_ICR_CAMCINT 0x00000002 // GPTM Capture A Match Interrupt
// Clear
#define TIMER_ICR_TATOCINT 0x00000001 // GPTM Timer A Time-Out Raw
// Interrupt
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TAILR register.
//
//*****************************************************************************
#define TIMER_TAILR_TAILRH_M 0xFFFF0000 // GPTM Timer A Interval Load
// Register High
#define TIMER_TAILR_TAILRL_M 0x0000FFFF // GPTM Timer A Interval Load
// Register Low
#define TIMER_TAILR_TAILRH_S 16
#define TIMER_TAILR_TAILRL_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TBILR register.
//
//*****************************************************************************
#define TIMER_TBILR_TBILRL_M 0x0000FFFF // GPTM Timer B Interval Load
// Register
#define TIMER_TBILR_TBILRL_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TAMATCHR
// register.
//
//*****************************************************************************
#define TIMER_TAMATCHR_TAMRH_M 0xFFFF0000 // GPTM Timer A Match Register High
#define TIMER_TAMATCHR_TAMRL_M 0x0000FFFF // GPTM Timer A Match Register Low
#define TIMER_TAMATCHR_TAMRH_S 16
#define TIMER_TAMATCHR_TAMRL_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TBMATCHR
// register.
//
//*****************************************************************************
#define TIMER_TBMATCHR_TBMRL_M 0x0000FFFF // GPTM Timer B Match Register Low
#define TIMER_TBMATCHR_TBMRL_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TAPR register.
//
//*****************************************************************************
#define TIMER_TAPR_TAPSR_M 0x000000FF // GPTM Timer A Prescale
#define TIMER_TAPR_TAPSR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TBPR register.
//
//*****************************************************************************
#define TIMER_TBPR_TBPSR_M 0x000000FF // GPTM Timer B Prescale
#define TIMER_TBPR_TBPSR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TAPMR register.
//
//*****************************************************************************
#define TIMER_TAPMR_TAPSMR_M 0x000000FF // GPTM TimerA Prescale Match
#define TIMER_TAPMR_TAPSMR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TBPMR register.
//
//*****************************************************************************
#define TIMER_TBPMR_TBPSMR_M 0x000000FF // GPTM TimerB Prescale Match
#define TIMER_TBPMR_TBPSMR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TAR register.
//
//*****************************************************************************
#define TIMER_TAR_TARH_M 0xFFFF0000 // GPTM Timer A Register High
#define TIMER_TAR_TARL_M 0x0000FFFF // GPTM Timer A Register Low
#define TIMER_TAR_TARH_S 16
#define TIMER_TAR_TARL_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TBR register.
//
//*****************************************************************************
#define TIMER_TBR_TBRL_M 0x0000FFFF // GPTM Timer B
#define TIMER_TBR_TBRL_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_ACTSS register.
//
//*****************************************************************************
#define ADC_ACTSS_ASEN3 0x00000008 // ADC SS3 Enable
#define ADC_ACTSS_ASEN2 0x00000004 // ADC SS2 Enable
#define ADC_ACTSS_ASEN1 0x00000002 // ADC SS1 Enable
#define ADC_ACTSS_ASEN0 0x00000001 // ADC SS0 Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_RIS register.
//
//*****************************************************************************
#define ADC_RIS_INR3 0x00000008 // SS3 Raw Interrupt Status
#define ADC_RIS_INR2 0x00000004 // SS2 Raw Interrupt Status
#define ADC_RIS_INR1 0x00000002 // SS1 Raw Interrupt Status
#define ADC_RIS_INR0 0x00000001 // SS0 Raw Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_IM register.
//
//*****************************************************************************
#define ADC_IM_MASK3 0x00000008 // SS3 Interrupt Mask
#define ADC_IM_MASK2 0x00000004 // SS2 Interrupt Mask
#define ADC_IM_MASK1 0x00000002 // SS1 Interrupt Mask
#define ADC_IM_MASK0 0x00000001 // SS0 Interrupt Mask
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_ISC register.
//
//*****************************************************************************
#define ADC_ISC_IN3 0x00000008 // SS3 Interrupt Status and Clear
#define ADC_ISC_IN2 0x00000004 // SS2 Interrupt Status and Clear
#define ADC_ISC_IN1 0x00000002 // SS1 Interrupt Status and Clear
#define ADC_ISC_IN0 0x00000001 // SS0 Interrupt Status and Clear
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_OSTAT register.
//
//*****************************************************************************
#define ADC_OSTAT_OV3 0x00000008 // SS3 FIFO Overflow
#define ADC_OSTAT_OV2 0x00000004 // SS2 FIFO Overflow
#define ADC_OSTAT_OV1 0x00000002 // SS1 FIFO Overflow
#define ADC_OSTAT_OV0 0x00000001 // SS0 FIFO Overflow
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_EMUX register.
//
//*****************************************************************************
#define ADC_EMUX_EM3_M 0x0000F000 // SS3 Trigger Select
#define ADC_EMUX_EM3_PROCESSOR 0x00000000 // Processor (default)
#define ADC_EMUX_EM3_COMP0 0x00001000 // Analog Comparator 0
#define ADC_EMUX_EM3_EXTERNAL 0x00004000 // External (GPIO PB4)
#define ADC_EMUX_EM3_TIMER 0x00005000 // Timer
#define ADC_EMUX_EM3_PWM0 0x00006000 // PWM0
#define ADC_EMUX_EM3_PWM1 0x00007000 // PWM1
#define ADC_EMUX_EM3_PWM2 0x00008000 // PWM2
#define ADC_EMUX_EM3_ALWAYS 0x0000F000 // Always (continuously sample)
#define ADC_EMUX_EM2_M 0x00000F00 // SS2 Trigger Select
#define ADC_EMUX_EM2_PROCESSOR 0x00000000 // Processor (default)
#define ADC_EMUX_EM2_COMP0 0x00000100 // Analog Comparator 0
#define ADC_EMUX_EM2_EXTERNAL 0x00000400 // External (GPIO PB4)
#define ADC_EMUX_EM2_TIMER 0x00000500 // Timer
#define ADC_EMUX_EM2_PWM0 0x00000600 // PWM0
#define ADC_EMUX_EM2_PWM1 0x00000700 // PWM1
#define ADC_EMUX_EM2_PWM2 0x00000800 // PWM2
#define ADC_EMUX_EM2_ALWAYS 0x00000F00 // Always (continuously sample)
#define ADC_EMUX_EM1_M 0x000000F0 // SS1 Trigger Select
#define ADC_EMUX_EM1_PROCESSOR 0x00000000 // Processor (default)
#define ADC_EMUX_EM1_COMP0 0x00000010 // Analog Comparator 0
#define ADC_EMUX_EM1_EXTERNAL 0x00000040 // External (GPIO PB4)
#define ADC_EMUX_EM1_TIMER 0x00000050 // Timer
#define ADC_EMUX_EM1_PWM0 0x00000060 // PWM0
#define ADC_EMUX_EM1_PWM1 0x00000070 // PWM1
#define ADC_EMUX_EM1_PWM2 0x00000080 // PWM2
#define ADC_EMUX_EM1_ALWAYS 0x000000F0 // Always (continuously sample)
#define ADC_EMUX_EM0_M 0x0000000F // SS0 Trigger Select
#define ADC_EMUX_EM0_PROCESSOR 0x00000000 // Processor (default)
#define ADC_EMUX_EM0_COMP0 0x00000001 // Analog Comparator 0
#define ADC_EMUX_EM0_EXTERNAL 0x00000004 // External (GPIO PB4)
#define ADC_EMUX_EM0_TIMER 0x00000005 // Timer
#define ADC_EMUX_EM0_PWM0 0x00000006 // PWM0
#define ADC_EMUX_EM0_PWM1 0x00000007 // PWM1
#define ADC_EMUX_EM0_PWM2 0x00000008 // PWM2
#define ADC_EMUX_EM0_ALWAYS 0x0000000F // Always (continuously sample)
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_USTAT register.
//
//*****************************************************************************
#define ADC_USTAT_UV3 0x00000008 // SS3 FIFO Underflow
#define ADC_USTAT_UV2 0x00000004 // SS2 FIFO Underflow
#define ADC_USTAT_UV1 0x00000002 // SS1 FIFO Underflow
#define ADC_USTAT_UV0 0x00000001 // SS0 FIFO Underflow
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSPRI register.
//
//*****************************************************************************
#define ADC_SSPRI_SS3_M 0x00003000 // SS3 Priority
#define ADC_SSPRI_SS3_1ST 0x00000000 // First priority
#define ADC_SSPRI_SS3_2ND 0x00001000 // Second priority
#define ADC_SSPRI_SS3_3RD 0x00002000 // Third priority
#define ADC_SSPRI_SS3_4TH 0x00003000 // Fourth priority
#define ADC_SSPRI_SS2_M 0x00000300 // SS2 Priority
#define ADC_SSPRI_SS2_1ST 0x00000000 // First priority
#define ADC_SSPRI_SS2_2ND 0x00000100 // Second priority
#define ADC_SSPRI_SS2_3RD 0x00000200 // Third priority
#define ADC_SSPRI_SS2_4TH 0x00000300 // Fourth priority
#define ADC_SSPRI_SS1_M 0x00000030 // SS1 Priority
#define ADC_SSPRI_SS1_1ST 0x00000000 // First priority
#define ADC_SSPRI_SS1_2ND 0x00000010 // Second priority
#define ADC_SSPRI_SS1_3RD 0x00000020 // Third priority
#define ADC_SSPRI_SS1_4TH 0x00000030 // Fourth priority
#define ADC_SSPRI_SS0_M 0x00000003 // SS0 Priority
#define ADC_SSPRI_SS0_1ST 0x00000000 // First priority
#define ADC_SSPRI_SS0_2ND 0x00000001 // Second priority
#define ADC_SSPRI_SS0_3RD 0x00000002 // Third priority
#define ADC_SSPRI_SS0_4TH 0x00000003 // Fourth priority
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_PSSI register.
//
//*****************************************************************************
#define ADC_PSSI_SS3 0x00000008 // SS3 Initiate
#define ADC_PSSI_SS2 0x00000004 // SS2 Initiate
#define ADC_PSSI_SS1 0x00000002 // SS1 Initiate
#define ADC_PSSI_SS0 0x00000001 // SS0 Initiate
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SAC register.
//
//*****************************************************************************
#define ADC_SAC_AVG_M 0x00000007 // Hardware Averaging Control
#define ADC_SAC_AVG_OFF 0x00000000 // No hardware oversampling
#define ADC_SAC_AVG_2X 0x00000001 // 2x hardware oversampling
#define ADC_SAC_AVG_4X 0x00000002 // 4x hardware oversampling
#define ADC_SAC_AVG_8X 0x00000003 // 8x hardware oversampling
#define ADC_SAC_AVG_16X 0x00000004 // 16x hardware oversampling
#define ADC_SAC_AVG_32X 0x00000005 // 32x hardware oversampling
#define ADC_SAC_AVG_64X 0x00000006 // 64x hardware oversampling
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSMUX0 register.
//
//*****************************************************************************
#define ADC_SSMUX0_MUX7_M 0x30000000 // 8th Sample Input Select
#define ADC_SSMUX0_MUX6_M 0x03000000 // 7th Sample Input Select
#define ADC_SSMUX0_MUX5_M 0x00300000 // 6th Sample Input Select
#define ADC_SSMUX0_MUX4_M 0x00030000 // 5th Sample Input Select
#define ADC_SSMUX0_MUX3_M 0x00003000 // 4th Sample Input Select
#define ADC_SSMUX0_MUX2_M 0x00000300 // 3rd Sample Input Select
#define ADC_SSMUX0_MUX1_M 0x00000030 // 2nd Sample Input Select
#define ADC_SSMUX0_MUX0_M 0x00000003 // 1st Sample Input Select
#define ADC_SSMUX0_MUX7_S 28
#define ADC_SSMUX0_MUX6_S 24
#define ADC_SSMUX0_MUX5_S 20
#define ADC_SSMUX0_MUX4_S 16
#define ADC_SSMUX0_MUX3_S 12
#define ADC_SSMUX0_MUX2_S 8
#define ADC_SSMUX0_MUX1_S 4
#define ADC_SSMUX0_MUX0_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSCTL0 register.
//
//*****************************************************************************
#define ADC_SSCTL0_TS7 0x80000000 // 8th Sample Temp Sensor Select
#define ADC_SSCTL0_IE7 0x40000000 // 8th Sample Interrupt Enable
#define ADC_SSCTL0_END7 0x20000000 // 8th Sample is End of Sequence
#define ADC_SSCTL0_D7 0x10000000 // 8th Sample Diff Input Select
#define ADC_SSCTL0_TS6 0x08000000 // 7th Sample Temp Sensor Select
#define ADC_SSCTL0_IE6 0x04000000 // 7th Sample Interrupt Enable
#define ADC_SSCTL0_END6 0x02000000 // 7th Sample is End of Sequence
#define ADC_SSCTL0_D6 0x01000000 // 7th Sample Diff Input Select
#define ADC_SSCTL0_TS5 0x00800000 // 6th Sample Temp Sensor Select
#define ADC_SSCTL0_IE5 0x00400000 // 6th Sample Interrupt Enable
#define ADC_SSCTL0_END5 0x00200000 // 6th Sample is End of Sequence
#define ADC_SSCTL0_D5 0x00100000 // 6th Sample Diff Input Select
#define ADC_SSCTL0_TS4 0x00080000 // 5th Sample Temp Sensor Select
#define ADC_SSCTL0_IE4 0x00040000 // 5th Sample Interrupt Enable
#define ADC_SSCTL0_END4 0x00020000 // 5th Sample is End of Sequence
#define ADC_SSCTL0_D4 0x00010000 // 5th Sample Diff Input Select
#define ADC_SSCTL0_TS3 0x00008000 // 4th Sample Temp Sensor Select
#define ADC_SSCTL0_IE3 0x00004000 // 4th Sample Interrupt Enable
#define ADC_SSCTL0_END3 0x00002000 // 4th Sample is End of Sequence
#define ADC_SSCTL0_D3 0x00001000 // 4th Sample Diff Input Select
#define ADC_SSCTL0_TS2 0x00000800 // 3rd Sample Temp Sensor Select
#define ADC_SSCTL0_IE2 0x00000400 // 3rd Sample Interrupt Enable
#define ADC_SSCTL0_END2 0x00000200 // 3rd Sample is End of Sequence
#define ADC_SSCTL0_D2 0x00000100 // 3rd Sample Diff Input Select
#define ADC_SSCTL0_TS1 0x00000080 // 2nd Sample Temp Sensor Select
#define ADC_SSCTL0_IE1 0x00000040 // 2nd Sample Interrupt Enable
#define ADC_SSCTL0_END1 0x00000020 // 2nd Sample is End of Sequence
#define ADC_SSCTL0_D1 0x00000010 // 2nd Sample Diff Input Select
#define ADC_SSCTL0_TS0 0x00000008 // 1st Sample Temp Sensor Select
#define ADC_SSCTL0_IE0 0x00000004 // 1st Sample Interrupt Enable
#define ADC_SSCTL0_END0 0x00000002 // 1st Sample is End of Sequence
#define ADC_SSCTL0_D0 0x00000001 // 1st Sample Diff Input Select
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSFIFO0 register.
//
//*****************************************************************************
#define ADC_SSFIFO0_DATA_M 0x000003FF // Conversion Result Data
#define ADC_SSFIFO0_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSFSTAT0 register.
//
//*****************************************************************************
#define ADC_SSFSTAT0_FULL 0x00001000 // FIFO Full
#define ADC_SSFSTAT0_EMPTY 0x00000100 // FIFO Empty
#define ADC_SSFSTAT0_HPTR_M 0x000000F0 // FIFO Head Pointer
#define ADC_SSFSTAT0_TPTR_M 0x0000000F // FIFO Tail Pointer
#define ADC_SSFSTAT0_HPTR_S 4
#define ADC_SSFSTAT0_TPTR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSMUX1 register.
//
//*****************************************************************************
#define ADC_SSMUX1_MUX3_M 0x00003000 // 4th Sample Input Select
#define ADC_SSMUX1_MUX2_M 0x00000300 // 3rd Sample Input Select
#define ADC_SSMUX1_MUX1_M 0x00000030 // 2nd Sample Input Select
#define ADC_SSMUX1_MUX0_M 0x00000003 // 1st Sample Input Select
#define ADC_SSMUX1_MUX3_S 12
#define ADC_SSMUX1_MUX2_S 8
#define ADC_SSMUX1_MUX1_S 4
#define ADC_SSMUX1_MUX0_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSCTL1 register.
//
//*****************************************************************************
#define ADC_SSCTL1_TS3 0x00008000 // 4th Sample Temp Sensor Select
#define ADC_SSCTL1_IE3 0x00004000 // 4th Sample Interrupt Enable
#define ADC_SSCTL1_END3 0x00002000 // 4th Sample is End of Sequence
#define ADC_SSCTL1_D3 0x00001000 // 4th Sample Diff Input Select
#define ADC_SSCTL1_TS2 0x00000800 // 3rd Sample Temp Sensor Select
#define ADC_SSCTL1_IE2 0x00000400 // 3rd Sample Interrupt Enable
#define ADC_SSCTL1_END2 0x00000200 // 3rd Sample is End of Sequence
#define ADC_SSCTL1_D2 0x00000100 // 3rd Sample Diff Input Select
#define ADC_SSCTL1_TS1 0x00000080 // 2nd Sample Temp Sensor Select
#define ADC_SSCTL1_IE1 0x00000040 // 2nd Sample Interrupt Enable
#define ADC_SSCTL1_END1 0x00000020 // 2nd Sample is End of Sequence
#define ADC_SSCTL1_D1 0x00000010 // 2nd Sample Diff Input Select
#define ADC_SSCTL1_TS0 0x00000008 // 1st Sample Temp Sensor Select
#define ADC_SSCTL1_IE0 0x00000004 // 1st Sample Interrupt Enable
#define ADC_SSCTL1_END0 0x00000002 // 1st Sample is End of Sequence
#define ADC_SSCTL1_D0 0x00000001 // 1st Sample Diff Input Select
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSFIFO1 register.
//
//*****************************************************************************
#define ADC_SSFIFO1_DATA_M 0x000003FF // Conversion Result Data
#define ADC_SSFIFO1_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSFSTAT1 register.
//
//*****************************************************************************
#define ADC_SSFSTAT1_FULL 0x00001000 // FIFO Full
#define ADC_SSFSTAT1_EMPTY 0x00000100 // FIFO Empty
#define ADC_SSFSTAT1_HPTR_M 0x000000F0 // FIFO Head Pointer
#define ADC_SSFSTAT1_TPTR_M 0x0000000F // FIFO Tail Pointer
#define ADC_SSFSTAT1_HPTR_S 4
#define ADC_SSFSTAT1_TPTR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSMUX2 register.
//
//*****************************************************************************
#define ADC_SSMUX2_MUX3_M 0x00003000 // 4th Sample Input Select
#define ADC_SSMUX2_MUX2_M 0x00000300 // 3rd Sample Input Select
#define ADC_SSMUX2_MUX1_M 0x00000030 // 2nd Sample Input Select
#define ADC_SSMUX2_MUX0_M 0x00000003 // 1st Sample Input Select
#define ADC_SSMUX2_MUX3_S 12
#define ADC_SSMUX2_MUX2_S 8
#define ADC_SSMUX2_MUX1_S 4
#define ADC_SSMUX2_MUX0_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSCTL2 register.
//
//*****************************************************************************
#define ADC_SSCTL2_TS3 0x00008000 // 4th Sample Temp Sensor Select
#define ADC_SSCTL2_IE3 0x00004000 // 4th Sample Interrupt Enable
#define ADC_SSCTL2_END3 0x00002000 // 4th Sample is End of Sequence
#define ADC_SSCTL2_D3 0x00001000 // 4th Sample Diff Input Select
#define ADC_SSCTL2_TS2 0x00000800 // 3rd Sample Temp Sensor Select
#define ADC_SSCTL2_IE2 0x00000400 // 3rd Sample Interrupt Enable
#define ADC_SSCTL2_END2 0x00000200 // 3rd Sample is End of Sequence
#define ADC_SSCTL2_D2 0x00000100 // 3rd Sample Diff Input Select
#define ADC_SSCTL2_TS1 0x00000080 // 2nd Sample Temp Sensor Select
#define ADC_SSCTL2_IE1 0x00000040 // 2nd Sample Interrupt Enable
#define ADC_SSCTL2_END1 0x00000020 // 2nd Sample is End of Sequence
#define ADC_SSCTL2_D1 0x00000010 // 2nd Sample Diff Input Select
#define ADC_SSCTL2_TS0 0x00000008 // 1st Sample Temp Sensor Select
#define ADC_SSCTL2_IE0 0x00000004 // 1st Sample Interrupt Enable
#define ADC_SSCTL2_END0 0x00000002 // 1st Sample is End of Sequence
#define ADC_SSCTL2_D0 0x00000001 // 1st Sample Diff Input Select
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSFIFO2 register.
//
//*****************************************************************************
#define ADC_SSFIFO2_DATA_M 0x000003FF // Conversion Result Data
#define ADC_SSFIFO2_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSFSTAT2 register.
//
//*****************************************************************************
#define ADC_SSFSTAT2_FULL 0x00001000 // FIFO Full
#define ADC_SSFSTAT2_EMPTY 0x00000100 // FIFO Empty
#define ADC_SSFSTAT2_HPTR_M 0x000000F0 // FIFO Head Pointer
#define ADC_SSFSTAT2_TPTR_M 0x0000000F // FIFO Tail Pointer
#define ADC_SSFSTAT2_HPTR_S 4
#define ADC_SSFSTAT2_TPTR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSMUX3 register.
//
//*****************************************************************************
#define ADC_SSMUX3_MUX0_M 0x00000003 // 1st Sample Input Select
#define ADC_SSMUX3_MUX0_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSCTL3 register.
//
//*****************************************************************************
#define ADC_SSCTL3_TS0 0x00000008 // 1st Sample Temp Sensor Select
#define ADC_SSCTL3_IE0 0x00000004 // 1st Sample Interrupt Enable
#define ADC_SSCTL3_END0 0x00000002 // 1st Sample is End of Sequence
#define ADC_SSCTL3_D0 0x00000001 // 1st Sample Diff Input Select
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSFIFO3 register.
//
//*****************************************************************************
#define ADC_SSFIFO3_DATA_M 0x000003FF // Conversion Result Data
#define ADC_SSFIFO3_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSFSTAT3 register.
//
//*****************************************************************************
#define ADC_SSFSTAT3_FULL 0x00001000 // FIFO Full
#define ADC_SSFSTAT3_EMPTY 0x00000100 // FIFO Empty
#define ADC_SSFSTAT3_HPTR_M 0x000000F0 // FIFO Head Pointer
#define ADC_SSFSTAT3_TPTR_M 0x0000000F // FIFO Tail Pointer
#define ADC_SSFSTAT3_HPTR_S 4
#define ADC_SSFSTAT3_TPTR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_TMLB register.
//
//*****************************************************************************
#define ADC_TMLB_LB 0x00000001 // Loopback Mode Enable
//*****************************************************************************
//
// The following are defines for the the interpretation of the data in the
// SSFIFOx when the ADC TMLB is enabled.
//
//*****************************************************************************
#define ADC_SSFIFO_TMLB_CNT_M 0x000003C0 // Continuous Sample Counter
#define ADC_SSFIFO_TMLB_CONT 0x00000020 // Continuation Sample Indicator
#define ADC_SSFIFO_TMLB_DIFF 0x00000010 // Differential Sample Indicator
#define ADC_SSFIFO_TMLB_TS 0x00000008 // Temp Sensor Sample Indicator
#define ADC_SSFIFO_TMLB_MUX_M 0x00000007 // Analog Input Indicator
#define ADC_SSFIFO_TMLB_CNT_S 6 // Sample counter shift
#define ADC_SSFIFO_TMLB_MUX_S 0 // Input channel number shift
//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_ACMIS register.
//
//*****************************************************************************
#define COMP_ACMIS_IN0 0x00000001 // Comparator 0 Masked Interrupt
// Status
//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_ACRIS register.
//
//*****************************************************************************
#define COMP_ACRIS_IN0 0x00000001 // Comparator 0 Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_ACINTEN register.
//
//*****************************************************************************
#define COMP_ACINTEN_IN0 0x00000001 // Comparator 0 Interrupt Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_ACREFCTL
// register.
//
//*****************************************************************************
#define COMP_ACREFCTL_EN 0x00000200 // Resistor Ladder Enable
#define COMP_ACREFCTL_RNG 0x00000100 // Resistor Ladder Range
#define COMP_ACREFCTL_VREF_M 0x0000000F // Resistor Ladder Voltage Ref
#define COMP_ACREFCTL_VREF_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_ACSTAT0 register.
//
//*****************************************************************************
#define COMP_ACSTAT0_OVAL 0x00000002 // Comparator Output Value
//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_ACCTL0 register.
//
//*****************************************************************************
#define COMP_ACCTL0_TOEN 0x00000800 // Trigger Output Enable
#define COMP_ACCTL0_ASRCP_M 0x00000600 // Analog Source Positive
#define COMP_ACCTL0_ASRCP_PIN 0x00000000 // Pin value of Cn+
#define COMP_ACCTL0_ASRCP_PIN0 0x00000200 // Pin value of C0+
#define COMP_ACCTL0_ASRCP_REF 0x00000400 // Internal voltage reference
// (VIREF)
#define COMP_ACCTL0_TSLVAL 0x00000080 // Trigger Sense Level Value
#define COMP_ACCTL0_TSEN_M 0x00000060 // Trigger Sense
#define COMP_ACCTL0_TSEN_LEVEL 0x00000000 // Level sense, see TSLVAL
#define COMP_ACCTL0_TSEN_FALL 0x00000020 // Falling edge
#define COMP_ACCTL0_TSEN_RISE 0x00000040 // Rising edge
#define COMP_ACCTL0_TSEN_BOTH 0x00000060 // Either edge
#define COMP_ACCTL0_ISLVAL 0x00000010 // Interrupt Sense Level Value
#define COMP_ACCTL0_ISEN_M 0x0000000C // Interrupt Sense
#define COMP_ACCTL0_ISEN_LEVEL 0x00000000 // Level sense, see ISLVAL
#define COMP_ACCTL0_ISEN_FALL 0x00000004 // Falling edge
#define COMP_ACCTL0_ISEN_RISE 0x00000008 // Rising edge
#define COMP_ACCTL0_ISEN_BOTH 0x0000000C // Either edge
#define COMP_ACCTL0_CINV 0x00000002 // Comparator Output Invert
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_CTL register.
//
//*****************************************************************************
#define CAN_CTL_TEST 0x00000080 // Test Mode Enable
#define CAN_CTL_CCE 0x00000040 // Configuration Change Enable
#define CAN_CTL_DAR 0x00000020 // Disable Automatic-Retransmission
#define CAN_CTL_EIE 0x00000008 // Error Interrupt Enable
#define CAN_CTL_SIE 0x00000004 // Status Interrupt Enable
#define CAN_CTL_IE 0x00000002 // CAN Interrupt Enable
#define CAN_CTL_INIT 0x00000001 // Initialization
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_STS register.
//
//*****************************************************************************
#define CAN_STS_BOFF 0x00000080 // Bus-Off Status
#define CAN_STS_EWARN 0x00000040 // Warning Status
#define CAN_STS_EPASS 0x00000020 // Error Passive
#define CAN_STS_RXOK 0x00000010 // Received a Message Successfully
#define CAN_STS_TXOK 0x00000008 // Transmitted a Message
// Successfully
#define CAN_STS_LEC_M 0x00000007 // Last Error Code
#define CAN_STS_LEC_NONE 0x00000000 // No Error
#define CAN_STS_LEC_STUFF 0x00000001 // Stuff Error
#define CAN_STS_LEC_FORM 0x00000002 // Format Error
#define CAN_STS_LEC_ACK 0x00000003 // ACK Error
#define CAN_STS_LEC_BIT1 0x00000004 // Bit 1 Error
#define CAN_STS_LEC_BIT0 0x00000005 // Bit 0 Error
#define CAN_STS_LEC_CRC 0x00000006 // CRC Error
#define CAN_STS_LEC_NOEVENT 0x00000007 // No Event
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_ERR register.
//
//*****************************************************************************
#define CAN_ERR_RP 0x00008000 // Received Error Passive
#define CAN_ERR_REC_M 0x00007F00 // Receive Error Counter
#define CAN_ERR_TEC_M 0x000000FF // Transmit Error Counter
#define CAN_ERR_REC_S 8
#define CAN_ERR_TEC_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_BIT register.
//
//*****************************************************************************
#define CAN_BIT_TSEG2_M 0x00007000 // Time Segment after Sample Point
#define CAN_BIT_TSEG1_M 0x00000F00 // Time Segment Before Sample Point
#define CAN_BIT_SJW_M 0x000000C0 // (Re)Synchronization Jump Width
#define CAN_BIT_BRP_M 0x0000003F // Baud Rate Prescaler
#define CAN_BIT_TSEG2_S 12
#define CAN_BIT_TSEG1_S 8
#define CAN_BIT_SJW_S 6
#define CAN_BIT_BRP_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_INT register.
//
//*****************************************************************************
#define CAN_INT_INTID_M 0x0000FFFF // Interrupt Identifier
#define CAN_INT_INTID_NONE 0x00000000 // No interrupt pending
#define CAN_INT_INTID_STATUS 0x00008000 // Status Interrupt
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_TST register.
//
//*****************************************************************************
#define CAN_TST_RX 0x00000080 // Receive Observation
#define CAN_TST_TX_M 0x00000060 // Transmit Control
#define CAN_TST_TX_CANCTL 0x00000000 // CAN Module Control
#define CAN_TST_TX_SAMPLE 0x00000020 // Sample Point
#define CAN_TST_TX_DOMINANT 0x00000040 // Driven Low
#define CAN_TST_TX_RECESSIVE 0x00000060 // Driven High
#define CAN_TST_LBACK 0x00000010 // Loopback Mode
#define CAN_TST_SILENT 0x00000008 // Silent Mode
#define CAN_TST_BASIC 0x00000004 // Basic Mode
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_BRPE register.
//
//*****************************************************************************
#define CAN_BRPE_BRPE_M 0x0000000F // Baud Rate Prescaler Extension
#define CAN_BRPE_BRPE_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1CRQ register.
//
//*****************************************************************************
#define CAN_IF1CRQ_BUSY 0x00008000 // Busy Flag
#define CAN_IF1CRQ_MNUM_M 0x0000003F // Message Number
#define CAN_IF1CRQ_MNUM_RSVD 0x00000000 // 0 is not a valid message number;
// it is interpreted as 0x20, or
// object 32
#define CAN_IF1CRQ_MNUM_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1CMSK register.
//
//*****************************************************************************
#define CAN_IF1CMSK_WRNRD 0x00000080 // Write, Not Read
#define CAN_IF1CMSK_MASK 0x00000040 // Access Mask Bits
#define CAN_IF1CMSK_ARB 0x00000020 // Access Arbitration Bits
#define CAN_IF1CMSK_CONTROL 0x00000010 // Access Control Bits
#define CAN_IF1CMSK_CLRINTPND 0x00000008 // Clear Interrupt Pending Bit
#define CAN_IF1CMSK_NEWDAT 0x00000004 // Access New Data
#define CAN_IF1CMSK_TXRQST 0x00000004 // Access Transmission Request
#define CAN_IF1CMSK_DATAA 0x00000002 // Access Data Byte 0 to 3
#define CAN_IF1CMSK_DATAB 0x00000001 // Access Data Byte 4 to 7
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1MSK1 register.
//
//*****************************************************************************
#define CAN_IF1MSK1_IDMSK_M 0x0000FFFF // Identifier Mask
#define CAN_IF1MSK1_IDMSK_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1MSK2 register.
//
//*****************************************************************************
#define CAN_IF1MSK2_MXTD 0x00008000 // Mask Extended Identifier
#define CAN_IF1MSK2_MDIR 0x00004000 // Mask Message Direction
#define CAN_IF1MSK2_IDMSK_M 0x00001FFF // Identifier Mask
#define CAN_IF1MSK2_IDMSK_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1ARB1 register.
//
//*****************************************************************************
#define CAN_IF1ARB1_ID_M 0x0000FFFF // Message Identifier
#define CAN_IF1ARB1_ID_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1ARB2 register.
//
//*****************************************************************************
#define CAN_IF1ARB2_MSGVAL 0x00008000 // Message Valid
#define CAN_IF1ARB2_XTD 0x00004000 // Extended Identifier
#define CAN_IF1ARB2_DIR 0x00002000 // Message Direction
#define CAN_IF1ARB2_ID_M 0x00001FFF // Message Identifier
#define CAN_IF1ARB2_ID_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1MCTL register.
//
//*****************************************************************************
#define CAN_IF1MCTL_NEWDAT 0x00008000 // New Data
#define CAN_IF1MCTL_MSGLST 0x00004000 // Message Lost
#define CAN_IF1MCTL_INTPND 0x00002000 // Interrupt Pending
#define CAN_IF1MCTL_UMASK 0x00001000 // Use Acceptance Mask
#define CAN_IF1MCTL_TXIE 0x00000800 // Transmit Interrupt Enable
#define CAN_IF1MCTL_RXIE 0x00000400 // Receive Interrupt Enable
#define CAN_IF1MCTL_RMTEN 0x00000200 // Remote Enable
#define CAN_IF1MCTL_TXRQST 0x00000100 // Transmit Request
#define CAN_IF1MCTL_EOB 0x00000080 // End of Buffer
#define CAN_IF1MCTL_DLC_M 0x0000000F // Data Length Code
#define CAN_IF1MCTL_DLC_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1DA1 register.
//
//*****************************************************************************
#define CAN_IF1DA1_DATA_M 0x0000FFFF // Data
#define CAN_IF1DA1_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1DA2 register.
//
//*****************************************************************************
#define CAN_IF1DA2_DATA_M 0x0000FFFF // Data
#define CAN_IF1DA2_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1DB1 register.
//
//*****************************************************************************
#define CAN_IF1DB1_DATA_M 0x0000FFFF // Data
#define CAN_IF1DB1_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1DB2 register.
//
//*****************************************************************************
#define CAN_IF1DB2_DATA_M 0x0000FFFF // Data
#define CAN_IF1DB2_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2CRQ register.
//
//*****************************************************************************
#define CAN_IF2CRQ_BUSY 0x00008000 // Busy Flag
#define CAN_IF2CRQ_MNUM_M 0x0000003F // Message Number
#define CAN_IF2CRQ_MNUM_RSVD 0x00000000 // 0 is not a valid message number;
// it is interpreted as 0x20, or
// object 32
#define CAN_IF2CRQ_MNUM_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2CMSK register.
//
//*****************************************************************************
#define CAN_IF2CMSK_WRNRD 0x00000080 // Write, Not Read
#define CAN_IF2CMSK_MASK 0x00000040 // Access Mask Bits
#define CAN_IF2CMSK_ARB 0x00000020 // Access Arbitration Bits
#define CAN_IF2CMSK_CONTROL 0x00000010 // Access Control Bits
#define CAN_IF2CMSK_CLRINTPND 0x00000008 // Clear Interrupt Pending Bit
#define CAN_IF2CMSK_NEWDAT 0x00000004 // Access New Data
#define CAN_IF2CMSK_TXRQST 0x00000004 // Access Transmission Request
#define CAN_IF2CMSK_DATAA 0x00000002 // Access Data Byte 0 to 3
#define CAN_IF2CMSK_DATAB 0x00000001 // Access Data Byte 4 to 7
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2MSK1 register.
//
//*****************************************************************************
#define CAN_IF2MSK1_IDMSK_M 0x0000FFFF // Identifier Mask
#define CAN_IF2MSK1_IDMSK_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2MSK2 register.
//
//*****************************************************************************
#define CAN_IF2MSK2_MXTD 0x00008000 // Mask Extended Identifier
#define CAN_IF2MSK2_MDIR 0x00004000 // Mask Message Direction
#define CAN_IF2MSK2_IDMSK_M 0x00001FFF // Identifier Mask
#define CAN_IF2MSK2_IDMSK_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2ARB1 register.
//
//*****************************************************************************
#define CAN_IF2ARB1_ID_M 0x0000FFFF // Message Identifier
#define CAN_IF2ARB1_ID_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2ARB2 register.
//
//*****************************************************************************
#define CAN_IF2ARB2_MSGVAL 0x00008000 // Message Valid
#define CAN_IF2ARB2_XTD 0x00004000 // Extended Identifier
#define CAN_IF2ARB2_DIR 0x00002000 // Message Direction
#define CAN_IF2ARB2_ID_M 0x00001FFF // Message Identifier
#define CAN_IF2ARB2_ID_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2MCTL register.
//
//*****************************************************************************
#define CAN_IF2MCTL_NEWDAT 0x00008000 // New Data
#define CAN_IF2MCTL_MSGLST 0x00004000 // Message Lost
#define CAN_IF2MCTL_INTPND 0x00002000 // Interrupt Pending
#define CAN_IF2MCTL_UMASK 0x00001000 // Use Acceptance Mask
#define CAN_IF2MCTL_TXIE 0x00000800 // Transmit Interrupt Enable
#define CAN_IF2MCTL_RXIE 0x00000400 // Receive Interrupt Enable
#define CAN_IF2MCTL_RMTEN 0x00000200 // Remote Enable
#define CAN_IF2MCTL_TXRQST 0x00000100 // Transmit Request
#define CAN_IF2MCTL_EOB 0x00000080 // End of Buffer
#define CAN_IF2MCTL_DLC_M 0x0000000F // Data Length Code
#define CAN_IF2MCTL_DLC_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2DA1 register.
//
//*****************************************************************************
#define CAN_IF2DA1_DATA_M 0x0000FFFF // Data
#define CAN_IF2DA1_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2DA2 register.
//
//*****************************************************************************
#define CAN_IF2DA2_DATA_M 0x0000FFFF // Data
#define CAN_IF2DA2_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2DB1 register.
//
//*****************************************************************************
#define CAN_IF2DB1_DATA_M 0x0000FFFF // Data
#define CAN_IF2DB1_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2DB2 register.
//
//*****************************************************************************
#define CAN_IF2DB2_DATA_M 0x0000FFFF // Data
#define CAN_IF2DB2_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_TXRQ1 register.
//
//*****************************************************************************
#define CAN_TXRQ1_TXRQST_M 0x0000FFFF // Transmission Request Bits
#define CAN_TXRQ1_TXRQST_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_TXRQ2 register.
//
//*****************************************************************************
#define CAN_TXRQ2_TXRQST_M 0x0000FFFF // Transmission Request Bits
#define CAN_TXRQ2_TXRQST_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_NWDA1 register.
//
//*****************************************************************************
#define CAN_NWDA1_NEWDAT_M 0x0000FFFF // New Data Bits
#define CAN_NWDA1_NEWDAT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_NWDA2 register.
//
//*****************************************************************************
#define CAN_NWDA2_NEWDAT_M 0x0000FFFF // New Data Bits
#define CAN_NWDA2_NEWDAT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_MSG1INT register.
//
//*****************************************************************************
#define CAN_MSG1INT_INTPND_M 0x0000FFFF // Interrupt Pending Bits
#define CAN_MSG1INT_INTPND_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_MSG2INT register.
//
//*****************************************************************************
#define CAN_MSG2INT_INTPND_M 0x0000FFFF // Interrupt Pending Bits
#define CAN_MSG2INT_INTPND_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_MSG1VAL register.
//
//*****************************************************************************
#define CAN_MSG1VAL_MSGVAL_M 0x0000FFFF // Message Valid Bits
#define CAN_MSG1VAL_MSGVAL_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_MSG2VAL register.
//
//*****************************************************************************
#define CAN_MSG2VAL_MSGVAL_M 0x0000FFFF // Message Valid Bits
#define CAN_MSG2VAL_MSGVAL_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the MAC_O_RIS register.
//
//*****************************************************************************
#define MAC_RIS_PHYINT 0x00000040 // PHY Interrupt
#define MAC_RIS_MDINT 0x00000020 // MII Transaction Complete
#define MAC_RIS_RXER 0x00000010 // Receive Error
#define MAC_RIS_FOV 0x00000008 // FIFO Overrun
#define MAC_RIS_TXEMP 0x00000004 // Transmit FIFO Empty
#define MAC_RIS_TXER 0x00000002 // Transmit Error
#define MAC_RIS_RXINT 0x00000001 // Packet Received
//*****************************************************************************
//
// The following are defines for the bit fields in the MAC_O_IACK register.
//
//*****************************************************************************
#define MAC_IACK_PHYINT 0x00000040 // Clear PHY Interrupt
#define MAC_IACK_MDINT 0x00000020 // Clear MII Transaction Complete
#define MAC_IACK_RXER 0x00000010 // Clear Receive Error
#define MAC_IACK_FOV 0x00000008 // Clear FIFO Overrun
#define MAC_IACK_TXEMP 0x00000004 // Clear Transmit FIFO Empty
#define MAC_IACK_TXER 0x00000002 // Clear Transmit Error
#define MAC_IACK_RXINT 0x00000001 // Clear Packet Received
//*****************************************************************************
//
// The following are defines for the bit fields in the MAC_O_IM register.
//
//*****************************************************************************
#define MAC_IM_PHYINTM 0x00000040 // Mask PHY Interrupt
#define MAC_IM_MDINTM 0x00000020 // Mask MII Transaction Complete
#define MAC_IM_RXERM 0x00000010 // Mask Receive Error
#define MAC_IM_FOVM 0x00000008 // Mask FIFO Overrun
#define MAC_IM_TXEMPM 0x00000004 // Mask Transmit FIFO Empty
#define MAC_IM_TXERM 0x00000002 // Mask Transmit Error
#define MAC_IM_RXINTM 0x00000001 // Mask Packet Received
//*****************************************************************************
//
// The following are defines for the bit fields in the MAC_O_RCTL register.
//
//*****************************************************************************
#define MAC_RCTL_RSTFIFO 0x00000010 // Clear Receive FIFO
#define MAC_RCTL_BADCRC 0x00000008 // Enable Reject Bad CRC
#define MAC_RCTL_PRMS 0x00000004 // Enable Promiscuous Mode
#define MAC_RCTL_AMUL 0x00000002 // Enable Multicast Frames
#define MAC_RCTL_RXEN 0x00000001 // Enable Receiver
//*****************************************************************************
//
// The following are defines for the bit fields in the MAC_O_TCTL register.
//
//*****************************************************************************
#define MAC_TCTL_DUPLEX 0x00000010 // Enable Duplex Mode
#define MAC_TCTL_CRC 0x00000004 // Enable CRC Generation
#define MAC_TCTL_PADEN 0x00000002 // Enable Packet Padding
#define MAC_TCTL_TXEN 0x00000001 // Enable Transmitter
//*****************************************************************************
//
// The following are defines for the bit fields in the MAC_O_DATA register.
//
//*****************************************************************************
#define MAC_DATA_TXDATA_M 0xFFFFFFFF // Transmit FIFO Data
#define MAC_DATA_RXDATA_M 0xFFFFFFFF // Receive FIFO Data
#define MAC_DATA_RXDATA_S 0
#define MAC_DATA_TXDATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the MAC_O_IA0 register.
//
//*****************************************************************************
#define MAC_IA0_MACOCT4_M 0xFF000000 // MAC Address Octet 4
#define MAC_IA0_MACOCT3_M 0x00FF0000 // MAC Address Octet 3
#define MAC_IA0_MACOCT2_M 0x0000FF00 // MAC Address Octet 2
#define MAC_IA0_MACOCT1_M 0x000000FF // MAC Address Octet 1
#define MAC_IA0_MACOCT4_S 24
#define MAC_IA0_MACOCT3_S 16
#define MAC_IA0_MACOCT2_S 8
#define MAC_IA0_MACOCT1_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the MAC_O_IA1 register.
//
//*****************************************************************************
#define MAC_IA1_MACOCT6_M 0x0000FF00 // MAC Address Octet 6
#define MAC_IA1_MACOCT5_M 0x000000FF // MAC Address Octet 5
#define MAC_IA1_MACOCT6_S 8
#define MAC_IA1_MACOCT5_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the MAC_O_THR register.
//
//*****************************************************************************
#define MAC_THR_THRESH_M 0x0000003F // Threshold Value
#define MAC_THR_THRESH_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the MAC_O_MCTL register.
//
//*****************************************************************************
#define MAC_MCTL_REGADR_M 0x000000F8 // MII Register Address
#define MAC_MCTL_WRITE 0x00000002 // MII Register Transaction Type
#define MAC_MCTL_START 0x00000001 // MII Register Transaction Enable
#define MAC_MCTL_REGADR_S 3
//*****************************************************************************
//
// The following are defines for the bit fields in the MAC_O_MDV register.
//
//*****************************************************************************
#define MAC_MDV_DIV_M 0x000000FF // Clock Divider
#define MAC_MDV_DIV_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the MAC_O_MTXD register.
//
//*****************************************************************************
#define MAC_MTXD_MDTX_M 0x0000FFFF // MII Register Transmit Data
#define MAC_MTXD_MDTX_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the MAC_O_MRXD register.
//
//*****************************************************************************
#define MAC_MRXD_MDRX_M 0x0000FFFF // MII Register Receive Data
#define MAC_MRXD_MDRX_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the MAC_O_NP register.
//
//*****************************************************************************
#define MAC_NP_NPR_M 0x0000003F // Number of Packets in Receive
// FIFO
#define MAC_NP_NPR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the MAC_O_TR register.
//
//*****************************************************************************
#define MAC_TR_NEWTX 0x00000001 // New Transmission
//*****************************************************************************
//
// The following are defines for the bit fields in the MAC_O_TS register.
//
//*****************************************************************************
#define MAC_TS_TSEN 0x00000001 // Time Stamp Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the PHY_MR0 register.
//
//*****************************************************************************
#define PHY_MR0_RESET 0x00008000 // Reset Registers
#define PHY_MR0_LOOPBK 0x00004000 // Loopback Mode
#define PHY_MR0_SPEEDSL 0x00002000 // Speed Select
#define PHY_MR0_ANEGEN 0x00001000 // Auto-Negotiation Enable
#define PHY_MR0_PWRDN 0x00000800 // Power Down
#define PHY_MR0_ISO 0x00000400 // Isolate
#define PHY_MR0_RANEG 0x00000200 // Restart Auto-Negotiation
#define PHY_MR0_DUPLEX 0x00000100 // Set Duplex Mode
#define PHY_MR0_COLT 0x00000080 // Collision Test
//*****************************************************************************
//
// The following are defines for the bit fields in the PHY_MR1 register.
//
//*****************************************************************************
#define PHY_MR1_100X_F 0x00004000 // 100BASE-TX Full-Duplex Mode
#define PHY_MR1_100X_H 0x00002000 // 100BASE-TX Half-Duplex Mode
#define PHY_MR1_10T_F 0x00001000 // 10BASE-T Full-Duplex Mode
#define PHY_MR1_10T_H 0x00000800 // 10BASE-T Half-Duplex Mode
#define PHY_MR1_MFPS 0x00000040 // Management Frames with Preamble
// Suppressed
#define PHY_MR1_ANEGC 0x00000020 // Auto-Negotiation Complete
#define PHY_MR1_RFAULT 0x00000010 // Remote Fault
#define PHY_MR1_ANEGA 0x00000008 // Auto-Negotiation
#define PHY_MR1_LINK 0x00000004 // Link Made
#define PHY_MR1_JAB 0x00000002 // Jabber Condition
#define PHY_MR1_EXTD 0x00000001 // Extended Capabilities
//*****************************************************************************
//
// The following are defines for the bit fields in the PHY_MR2 register.
//
//*****************************************************************************
#define PHY_MR2_OUI_M 0x0000FFFF // Organizationally Unique
// Identifier[21:6]
#define PHY_MR2_OUI_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PHY_MR3 register.
//
//*****************************************************************************
#define PHY_MR3_OUI_M 0x0000FC00 // Organizationally Unique
// Identifier[5:0]
#define PHY_MR3_MN_M 0x000003F0 // Model Number
#define PHY_MR3_RN_M 0x0000000F // Revision Number
#define PHY_MR3_OUI_S 10
#define PHY_MR3_MN_S 4
#define PHY_MR3_RN_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PHY_MR4 register.
//
//*****************************************************************************
#define PHY_MR4_NP 0x00008000 // Next Page
#define PHY_MR4_RF 0x00002000 // Remote Fault
#define PHY_MR4_A3 0x00000100 // Technology Ability Field [3]
#define PHY_MR4_A2 0x00000080 // Technology Ability Field [2]
#define PHY_MR4_A1 0x00000040 // Technology Ability Field [1]
#define PHY_MR4_A0 0x00000020 // Technology Ability Field [0]
#define PHY_MR4_S_M 0x0000001F // Selector Field
#define PHY_MR4_S_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the PHY_MR5 register.
//
//*****************************************************************************
#define PHY_MR5_NP 0x00008000 // Next Page
#define PHY_MR5_ACK 0x00004000 // Acknowledge
#define PHY_MR5_RF 0x00002000 // Remote Fault
#define PHY_MR5_A_M 0x00001FE0 // Technology Ability Field
#define PHY_MR5_S_M 0x0000001F // Selector Field
#define PHY_MR5_S_8023 0x00000001 // IEEE Std 802.3
#define PHY_MR5_S_8029 0x00000002 // IEEE Std 802.9 ISLAN-16T
#define PHY_MR5_S_8025 0x00000003 // IEEE Std 802.5
#define PHY_MR5_S_1394 0x00000004 // IEEE Std 1394
#define PHY_MR5_A_S 5
//*****************************************************************************
//
// The following are defines for the bit fields in the PHY_MR6 register.
//
//*****************************************************************************
#define PHY_MR6_PDF 0x00000010 // Parallel Detection Fault
#define PHY_MR6_LPNPA 0x00000008 // Link Partner is Next Page Able
#define PHY_MR6_PRX 0x00000002 // New Page Received
#define PHY_MR6_LPANEGA 0x00000001 // Link Partner is Auto-Negotiation
// Able
//*****************************************************************************
//
// The following are defines for the bit fields in the PHY_MR16 register.
//
//*****************************************************************************
#define PHY_MR16_RPTR 0x00008000 // Repeater Mode
#define PHY_MR16_INPOL 0x00004000 // Interrupt Polarity
#define PHY_MR16_TXHIM 0x00001000 // Transmit High Impedance Mode
#define PHY_MR16_SQEI 0x00000800 // SQE Inhibit Testing
#define PHY_MR16_NL10 0x00000400 // Natural Loopback Mode
#define PHY_MR16_APOL 0x00000020 // Auto-Polarity Disable
#define PHY_MR16_RVSPOL 0x00000010 // Receive Data Polarity
#define PHY_MR16_PCSBP 0x00000002 // PCS Bypass
#define PHY_MR16_RXCC 0x00000001 // Receive Clock Control
//*****************************************************************************
//
// The following are defines for the bit fields in the PHY_MR17 register.
//
//*****************************************************************************
#define PHY_MR17_JABBER_IE 0x00008000 // Jabber Interrupt Enable
#define PHY_MR17_RXER_IE 0x00004000 // Receive Error Interrupt Enable
#define PHY_MR17_PRX_IE 0x00002000 // Page Received Interrupt Enable
#define PHY_MR17_PDF_IE 0x00001000 // Parallel Detection Fault
// Interrupt Enable
#define PHY_MR17_LPACK_IE 0x00000800 // LP Acknowledge Interrupt Enable
#define PHY_MR17_LSCHG_IE 0x00000400 // Link Status Change Interrupt
// Enable
#define PHY_MR17_RFAULT_IE 0x00000200 // Remote Fault Interrupt Enable
#define PHY_MR17_ANEGCOMP_IE 0x00000100 // Auto-Negotiation Complete
// Interrupt Enable
#define PHY_MR17_JABBER_INT 0x00000080 // Jabber Event Interrupt
#define PHY_MR17_RXER_INT 0x00000040 // Receive Error Interrupt
#define PHY_MR17_PRX_INT 0x00000020 // Page Receive Interrupt
#define PHY_MR17_PDF_INT 0x00000010 // Parallel Detection Fault
// Interrupt
#define PHY_MR17_LPACK_INT 0x00000008 // LP Acknowledge Interrupt
#define PHY_MR17_LSCHG_INT 0x00000004 // Link Status Change Interrupt
#define PHY_MR17_RFAULT_INT 0x00000002 // Remote Fault Interrupt
#define PHY_MR17_ANEGCOMP_INT 0x00000001 // Auto-Negotiation Complete
// Interrupt
//*****************************************************************************
//
// The following are defines for the bit fields in the PHY_MR18 register.
//
//*****************************************************************************
#define PHY_MR18_ANEGF 0x00001000 // Auto-Negotiation Failure
#define PHY_MR18_DPLX 0x00000800 // Duplex Mode
#define PHY_MR18_RATE 0x00000400 // Rate
#define PHY_MR18_RXSD 0x00000200 // Receive Detection
#define PHY_MR18_RX_LOCK 0x00000100 // Receive PLL Lock
//*****************************************************************************
//
// The following are defines for the bit fields in the PHY_MR19 register.
//
//*****************************************************************************
#define PHY_MR19_TXO_M 0x0000C000 // Transmit Amplitude Selection
#define PHY_MR19_TXO_00DB 0x00000000 // Gain set for 0.0dB of insertion
// loss
#define PHY_MR19_TXO_04DB 0x00004000 // Gain set for 0.4dB of insertion
// loss
#define PHY_MR19_TXO_08DB 0x00008000 // Gain set for 0.8dB of insertion
// loss
#define PHY_MR19_TXO_12DB 0x0000C000 // Gain set for 1.2dB of insertion
// loss
//*****************************************************************************
//
// The following are defines for the bit fields in the PHY_MR23 register.
//
//*****************************************************************************
#define PHY_MR23_LED1_M 0x000000F0 // LED1 Source
#define PHY_MR23_LED1_LINK 0x00000000 // Link OK
#define PHY_MR23_LED1_RXTX 0x00000010 // RX or TX Activity (Default LED1)
#define PHY_MR23_LED1_100 0x00000050 // 100BASE-TX mode
#define PHY_MR23_LED1_10 0x00000060 // 10BASE-T mode
#define PHY_MR23_LED1_DUPLEX 0x00000070 // Full-Duplex
#define PHY_MR23_LED1_LINKACT 0x00000080 // Link OK & Blink=RX or TX
// Activity
#define PHY_MR23_LED0_M 0x0000000F // LED0 Source
#define PHY_MR23_LED0_LINK 0x00000000 // Link OK (Default LED0)
#define PHY_MR23_LED0_RXTX 0x00000001 // RX or TX Activity
#define PHY_MR23_LED0_100 0x00000005 // 100BASE-TX mode
#define PHY_MR23_LED0_10 0x00000006 // 10BASE-T mode
#define PHY_MR23_LED0_DUPLEX 0x00000007 // Full-Duplex
#define PHY_MR23_LED0_LINKACT 0x00000008 // Link OK & Blink=RX or TX
// Activity
//*****************************************************************************
//
// The following are defines for the bit fields in the PHY_MR24 register.
//
//*****************************************************************************
#define PHY_MR24_PD_MODE 0x00000080 // Parallel Detection Mode
#define PHY_MR24_AUTO_SW 0x00000040 // Auto-Switching Enable
#define PHY_MR24_MDIX 0x00000020 // Auto-Switching Configuration
#define PHY_MR24_MDIX_CM 0x00000010 // Auto-Switching Complete
#define PHY_MR24_MDIX_SD_M 0x0000000F // Auto-Switching Seed
#define PHY_MR24_MDIX_SD_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_RTCC register.
//
//*****************************************************************************
#define HIB_RTCC_M 0xFFFFFFFF // RTC Counter
#define HIB_RTCC_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_RTCM0 register.
//
//*****************************************************************************
#define HIB_RTCM0_M 0xFFFFFFFF // RTC Match 0
#define HIB_RTCM0_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_RTCM1 register.
//
//*****************************************************************************
#define HIB_RTCM1_M 0xFFFFFFFF // RTC Match 1
#define HIB_RTCM1_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_RTCLD register.
//
//*****************************************************************************
#define HIB_RTCLD_M 0xFFFFFFFF // RTC Load
#define HIB_RTCLD_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_CTL register.
//
//*****************************************************************************
#define HIB_CTL_VABORT 0x00000080 // Power Cut Abort Enable
#define HIB_CTL_CLK32EN 0x00000040 // Clocking Enable
#define HIB_CTL_LOWBATEN 0x00000020 // Low Battery Monitoring Enable
#define HIB_CTL_PINWEN 0x00000010 // External WAKE Pin Enable
#define HIB_CTL_RTCWEN 0x00000008 // RTC Wake-up Enable
#define HIB_CTL_CLKSEL 0x00000004 // Hibernation Module Clock Select
#define HIB_CTL_HIBREQ 0x00000002 // Hibernation Request
#define HIB_CTL_RTCEN 0x00000001 // RTC Timer Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_IM register.
//
//*****************************************************************************
#define HIB_IM_EXTW 0x00000008 // External Wake-Up Interrupt Mask
#define HIB_IM_LOWBAT 0x00000004 // Low Battery Voltage Interrupt
// Mask
#define HIB_IM_RTCALT1 0x00000002 // RTC Alert 1 Interrupt Mask
#define HIB_IM_RTCALT0 0x00000001 // RTC Alert 0 Interrupt Mask
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_RIS register.
//
//*****************************************************************************
#define HIB_RIS_EXTW 0x00000008 // External Wake-Up Raw Interrupt
// Status
#define HIB_RIS_LOWBAT 0x00000004 // Low Battery Voltage Raw
// Interrupt Status
#define HIB_RIS_RTCALT1 0x00000002 // RTC Alert 1 Raw Interrupt Status
#define HIB_RIS_RTCALT0 0x00000001 // RTC Alert 0 Raw Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_MIS register.
//
//*****************************************************************************
#define HIB_MIS_EXTW 0x00000008 // External Wake-Up Masked
// Interrupt Status
#define HIB_MIS_LOWBAT 0x00000004 // Low Battery Voltage Masked
// Interrupt Status
#define HIB_MIS_RTCALT1 0x00000002 // RTC Alert 1 Masked Interrupt
// Status
#define HIB_MIS_RTCALT0 0x00000001 // RTC Alert 0 Masked Interrupt
// Status
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_IC register.
//
//*****************************************************************************
#define HIB_IC_EXTW 0x00000008 // External Wake-Up Masked
// Interrupt Clear
#define HIB_IC_LOWBAT 0x00000004 // Low Battery Voltage Masked
// Interrupt Clear
#define HIB_IC_RTCALT1 0x00000002 // RTC Alert1 Masked Interrupt
// Clear
#define HIB_IC_RTCALT0 0x00000001 // RTC Alert0 Masked Interrupt
// Clear
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_RTCT register.
//
//*****************************************************************************
#define HIB_RTCT_TRIM_M 0x0000FFFF // RTC Trim Value
#define HIB_RTCT_TRIM_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the HIB_DATA register.
//
//*****************************************************************************
#define HIB_DATA_RTD_M 0xFFFFFFFF // Hibernation Module NV Data
#define HIB_DATA_RTD_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMA register.
//
//*****************************************************************************
#define FLASH_FMA_OFFSET_M 0x0003FFFF // Address Offset
#define FLASH_FMA_OFFSET_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMD register.
//
//*****************************************************************************
#define FLASH_FMD_DATA_M 0xFFFFFFFF // Data Value
#define FLASH_FMD_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMC register.
//
//*****************************************************************************
#define FLASH_FMC_WRKEY 0xA4420000 // FLASH write key
#define FLASH_FMC_COMT 0x00000008 // Commit Register Value
#define FLASH_FMC_MERASE 0x00000004 // Mass Erase Flash Memory
#define FLASH_FMC_ERASE 0x00000002 // Erase a Page of Flash Memory
#define FLASH_FMC_WRITE 0x00000001 // Write a Word into Flash Memory
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FCRIS register.
//
//*****************************************************************************
#define FLASH_FCRIS_PRIS 0x00000002 // Programming Raw Interrupt Status
#define FLASH_FCRIS_ARIS 0x00000001 // Access Raw Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FCIM register.
//
//*****************************************************************************
#define FLASH_FCIM_PMASK 0x00000002 // Programming Interrupt Mask
#define FLASH_FCIM_AMASK 0x00000001 // Access Interrupt Mask
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FCMISC register.
//
//*****************************************************************************
#define FLASH_FCMISC_PMISC 0x00000002 // Programming Masked Interrupt
// Status and Clear
#define FLASH_FCMISC_AMISC 0x00000001 // Access Masked Interrupt Status
// and Clear
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_USECRL register.
//
//*****************************************************************************
#define FLASH_USECRL_M 0x000000FF // Microsecond Reload Value
#define FLASH_USECRL_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_USERDBG register.
//
//*****************************************************************************
#define FLASH_USERDBG_NW 0x80000000 // User Debug Not Written
#define FLASH_USERDBG_DATA_M 0x7FFFFFFC // User Data
#define FLASH_USERDBG_DBG1 0x00000002 // Debug Control 1
#define FLASH_USERDBG_DBG0 0x00000001 // Debug Control 0
#define FLASH_USERDBG_DATA_S 2
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_USERREG0 register.
//
//*****************************************************************************
#define FLASH_USERREG0_NW 0x80000000 // Not Written
#define FLASH_USERREG0_DATA_M 0x7FFFFFFF // User Data
#define FLASH_USERREG0_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_USERREG1 register.
//
//*****************************************************************************
#define FLASH_USERREG1_NW 0x80000000 // Not Written
#define FLASH_USERREG1_DATA_M 0x7FFFFFFF // User Data
#define FLASH_USERREG1_DATA_S 0
//*****************************************************************************
//
// The following are defines for the erase size of the FLASH block that is
// erased by an erase operation, and the protect size is the size of the FLASH
// block that is protected by each protection register.
//
//*****************************************************************************
#define FLASH_PROTECT_SIZE 0x00000800
#define FLASH_ERASE_SIZE 0x00000400
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DID0 register.
//
//*****************************************************************************
#define SYSCTL_DID0_VER_M 0x70000000 // DID0 Version
#define SYSCTL_DID0_VER_1 0x10000000 // Second version of the DID0
// register format
#define SYSCTL_DID0_CLASS_M 0x00FF0000 // Device Class
#define SYSCTL_DID0_CLASS_FURY 0x00010000 // Stellaris(R) Fury-class devices
#define SYSCTL_DID0_MAJ_M 0x0000FF00 // Major Revision
#define SYSCTL_DID0_MAJ_REVA 0x00000000 // Revision A (initial device)
#define SYSCTL_DID0_MAJ_REVB 0x00000100 // Revision B (first base layer
// revision)
#define SYSCTL_DID0_MAJ_REVC 0x00000200 // Revision C (second base layer
// revision)
#define SYSCTL_DID0_MIN_M 0x000000FF // Minor Revision
#define SYSCTL_DID0_MIN_0 0x00000000 // Initial device, or a major
// revision update
#define SYSCTL_DID0_MIN_1 0x00000001 // First metal layer change
#define SYSCTL_DID0_MIN_2 0x00000002 // Second metal layer change
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DID1 register.
//
//*****************************************************************************
#define SYSCTL_DID1_VER_M 0xF0000000 // DID1 Version
#define SYSCTL_DID1_VER_1 0x10000000 // Second version of the DID1
// register format
#define SYSCTL_DID1_FAM_M 0x0F000000 // Family
#define SYSCTL_DID1_FAM_STELLARIS \
0x00000000 // Stellaris family of
// microcontollers, that is, all
// devices with external part
// numbers starting with LM3S
#define SYSCTL_DID1_PRTNO_M 0x00FF0000 // Part Number
#define SYSCTL_DID1_PRTNO_8962 0x00A60000 // LM3S8962
#define SYSCTL_DID1_PINCNT_M 0x0000E000 // Package Pin Count
#define SYSCTL_DID1_PINCNT_100 0x00004000 // 100-pin package
#define SYSCTL_DID1_TEMP_M 0x000000E0 // Temperature Range
#define SYSCTL_DID1_TEMP_C 0x00000000 // Commercial temperature range (0C
// to 70C)
#define SYSCTL_DID1_TEMP_I 0x00000020 // Industrial temperature range
// (-40C to 85C)
#define SYSCTL_DID1_TEMP_E 0x00000040 // Extended temperature range (-40C
// to 105C)
#define SYSCTL_DID1_PKG_M 0x00000018 // Package Type
#define SYSCTL_DID1_PKG_SOIC 0x00000000 // SOIC package
#define SYSCTL_DID1_PKG_QFP 0x00000008 // LQFP package
#define SYSCTL_DID1_PKG_BGA 0x00000010 // BGA package
#define SYSCTL_DID1_ROHS 0x00000004 // RoHS-Compliance
#define SYSCTL_DID1_QUAL_M 0x00000003 // Qualification Status
#define SYSCTL_DID1_QUAL_ES 0x00000000 // Engineering Sample (unqualified)
#define SYSCTL_DID1_QUAL_PP 0x00000001 // Pilot Production (unqualified)
#define SYSCTL_DID1_QUAL_FQ 0x00000002 // Fully Qualified
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC0 register.
//
//*****************************************************************************
#define SYSCTL_DC0_SRAMSZ_M 0xFFFF0000 // SRAM Size
#define SYSCTL_DC0_SRAMSZ_64KB 0x00FF0000 // 64 KB of SRAM
#define SYSCTL_DC0_FLASHSZ_M 0x0000FFFF // Flash Size
#define SYSCTL_DC0_FLASHSZ_256K 0x0000007F // 256 KB of Flash
#define SYSCTL_DC0_SRAMSZ_S 16 // SRAM size shift
#define SYSCTL_DC0_FLASHSZ_S 0 // Flash size shift
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC1 register.
//
//*****************************************************************************
#define SYSCTL_DC1_CAN0 0x01000000 // CAN Module 0 Present
#define SYSCTL_DC1_PWM 0x00100000 // PWM Module Present
#define SYSCTL_DC1_ADC 0x00010000 // ADC Module Present
#define SYSCTL_DC1_MINSYSDIV_M 0x0000F000 // System Clock Divider
#define SYSCTL_DC1_MINSYSDIV_50 0x00003000 // Specifies a 50-MHz CPU clock
// with a PLL divider of 4
#define SYSCTL_DC1_ADCSPD_M 0x00000300 // Max ADC Speed
#define SYSCTL_DC1_ADCSPD_500K 0x00000200 // 500K samples/second
#define SYSCTL_DC1_MPU 0x00000080 // MPU Present
#define SYSCTL_DC1_HIB 0x00000040 // Hibernation Module Present
#define SYSCTL_DC1_TEMP 0x00000020 // Temp Sensor Present
#define SYSCTL_DC1_PLL 0x00000010 // PLL Present
#define SYSCTL_DC1_WDT 0x00000008 // Watchdog Timer Present
#define SYSCTL_DC1_SWO 0x00000004 // SWO Trace Port Present
#define SYSCTL_DC1_SWD 0x00000002 // SWD Present
#define SYSCTL_DC1_JTAG 0x00000001 // JTAG Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC2 register.
//
//*****************************************************************************
#define SYSCTL_DC2_COMP0 0x01000000 // Analog Comparator 0 Present
#define SYSCTL_DC2_TIMER3 0x00080000 // Timer Module 3 Present
#define SYSCTL_DC2_TIMER2 0x00040000 // Timer Module 2 Present
#define SYSCTL_DC2_TIMER1 0x00020000 // Timer Module 1 Present
#define SYSCTL_DC2_TIMER0 0x00010000 // Timer Module 0 Present
#define SYSCTL_DC2_I2C0 0x00001000 // I2C Module 0 Present
#define SYSCTL_DC2_QEI1 0x00000200 // QEI Module 1 Present
#define SYSCTL_DC2_QEI0 0x00000100 // QEI Module 0 Present
#define SYSCTL_DC2_SSI0 0x00000010 // SSI Module 0 Present
#define SYSCTL_DC2_UART1 0x00000002 // UART Module 1 Present
#define SYSCTL_DC2_UART0 0x00000001 // UART Module 0 Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC3 register.
//
//*****************************************************************************
#define SYSCTL_DC3_32KHZ 0x80000000 // 32KHz Input Clock Available
#define SYSCTL_DC3_CCP1 0x02000000 // CCP1 Pin Present
#define SYSCTL_DC3_CCP0 0x01000000 // CCP0 Pin Present
#define SYSCTL_DC3_ADC3 0x00080000 // ADC3 Pin Present
#define SYSCTL_DC3_ADC2 0x00040000 // ADC2 Pin Present
#define SYSCTL_DC3_ADC1 0x00020000 // ADC1 Pin Present
#define SYSCTL_DC3_ADC0 0x00010000 // ADC0 Pin Present
#define SYSCTL_DC3_PWMFAULT 0x00008000 // PWM Fault Pin Present
#define SYSCTL_DC3_C0O 0x00000100 // C0o Pin Present
#define SYSCTL_DC3_C0PLUS 0x00000080 // C0+ Pin Present
#define SYSCTL_DC3_C0MINUS 0x00000040 // C0- Pin Present
#define SYSCTL_DC3_PWM5 0x00000020 // PWM5 Pin Present
#define SYSCTL_DC3_PWM4 0x00000010 // PWM4 Pin Present
#define SYSCTL_DC3_PWM3 0x00000008 // PWM3 Pin Present
#define SYSCTL_DC3_PWM2 0x00000004 // PWM2 Pin Present
#define SYSCTL_DC3_PWM1 0x00000002 // PWM1 Pin Present
#define SYSCTL_DC3_PWM0 0x00000001 // PWM0 Pin Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC4 register.
//
//*****************************************************************************
#define SYSCTL_DC4_EPHY0 0x40000000 // Ethernet PHY Layer 0 Present
#define SYSCTL_DC4_EMAC0 0x10000000 // Ethernet MAC Layer 0 Present
#define SYSCTL_DC4_E1588 0x01000000 // 1588 Capable
#define SYSCTL_DC4_GPIOG 0x00000040 // GPIO Port G Present
#define SYSCTL_DC4_GPIOF 0x00000020 // GPIO Port F Present
#define SYSCTL_DC4_GPIOE 0x00000010 // GPIO Port E Present
#define SYSCTL_DC4_GPIOD 0x00000008 // GPIO Port D Present
#define SYSCTL_DC4_GPIOC 0x00000004 // GPIO Port C Present
#define SYSCTL_DC4_GPIOB 0x00000002 // GPIO Port B Present
#define SYSCTL_DC4_GPIOA 0x00000001 // GPIO Port A Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PBORCTL register.
//
//*****************************************************************************
#define SYSCTL_PBORCTL_BORIOR 0x00000002 // BOR Interrupt or Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_LDOPCTL register.
//
//*****************************************************************************
#define SYSCTL_LDOPCTL_M 0x0000003F // LDO Output Voltage
#define SYSCTL_LDOPCTL_2_50V 0x00000000 // 2.50
#define SYSCTL_LDOPCTL_2_45V 0x00000001 // 2.45
#define SYSCTL_LDOPCTL_2_40V 0x00000002 // 2.40
#define SYSCTL_LDOPCTL_2_35V 0x00000003 // 2.35
#define SYSCTL_LDOPCTL_2_30V 0x00000004 // 2.30
#define SYSCTL_LDOPCTL_2_25V 0x00000005 // 2.25
#define SYSCTL_LDOPCTL_2_75V 0x0000001B // 2.75
#define SYSCTL_LDOPCTL_2_70V 0x0000001C // 2.70
#define SYSCTL_LDOPCTL_2_65V 0x0000001D // 2.65
#define SYSCTL_LDOPCTL_2_60V 0x0000001E // 2.60
#define SYSCTL_LDOPCTL_2_55V 0x0000001F // 2.55
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRCR0 register.
//
//*****************************************************************************
#define SYSCTL_SRCR0_CAN0 0x01000000 // CAN0 Reset Control
#define SYSCTL_SRCR0_PWM 0x00100000 // PWM Reset Control
#define SYSCTL_SRCR0_ADC 0x00010000 // ADC0 Reset Control
#define SYSCTL_SRCR0_HIB 0x00000040 // HIB Reset Control
#define SYSCTL_SRCR0_WDT 0x00000008 // WDT Reset Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRCR1 register.
//
//*****************************************************************************
#define SYSCTL_SRCR1_COMP0 0x01000000 // Analog Comp 0 Reset Control
#define SYSCTL_SRCR1_TIMER3 0x00080000 // Timer 3 Reset Control
#define SYSCTL_SRCR1_TIMER2 0x00040000 // Timer 2 Reset Control
#define SYSCTL_SRCR1_TIMER1 0x00020000 // Timer 1 Reset Control
#define SYSCTL_SRCR1_TIMER0 0x00010000 // Timer 0 Reset Control
#define SYSCTL_SRCR1_I2C0 0x00001000 // I2C0 Reset Control
#define SYSCTL_SRCR1_QEI1 0x00000200 // QEI1 Reset Control
#define SYSCTL_SRCR1_QEI0 0x00000100 // QEI0 Reset Control
#define SYSCTL_SRCR1_SSI0 0x00000010 // SSI0 Reset Control
#define SYSCTL_SRCR1_UART1 0x00000002 // UART1 Reset Control
#define SYSCTL_SRCR1_UART0 0x00000001 // UART0 Reset Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRCR2 register.
//
//*****************************************************************************
#define SYSCTL_SRCR2_EPHY0 0x40000000 // PHY0 Reset Control
#define SYSCTL_SRCR2_EMAC0 0x10000000 // MAC0 Reset Control
#define SYSCTL_SRCR2_GPIOG 0x00000040 // Port G Reset Control
#define SYSCTL_SRCR2_GPIOF 0x00000020 // Port F Reset Control
#define SYSCTL_SRCR2_GPIOE 0x00000010 // Port E Reset Control
#define SYSCTL_SRCR2_GPIOD 0x00000008 // Port D Reset Control
#define SYSCTL_SRCR2_GPIOC 0x00000004 // Port C Reset Control
#define SYSCTL_SRCR2_GPIOB 0x00000002 // Port B Reset Control
#define SYSCTL_SRCR2_GPIOA 0x00000001 // Port A Reset Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RIS register.
//
//*****************************************************************************
#define SYSCTL_RIS_PLLLRIS 0x00000040 // PLL Lock Raw Interrupt Status
#define SYSCTL_RIS_BORRIS 0x00000002 // Brown-Out Reset Raw Interrupt
// Status
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_IMC register.
//
//*****************************************************************************
#define SYSCTL_IMC_PLLLIM 0x00000040 // PLL Lock Interrupt Mask
#define SYSCTL_IMC_BORIM 0x00000002 // Brown-Out Reset Interrupt Mask
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_MISC register.
//
//*****************************************************************************
#define SYSCTL_MISC_PLLLMIS 0x00000040 // PLL Lock Masked Interrupt Status
#define SYSCTL_MISC_BORMIS 0x00000002 // BOR Masked Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RESC register.
//
//*****************************************************************************
#define SYSCTL_RESC_SW 0x00000010 // Software Reset
#define SYSCTL_RESC_WDT 0x00000008 // Watchdog Timer Reset
#define SYSCTL_RESC_BOR 0x00000004 // Brown-Out Reset
#define SYSCTL_RESC_POR 0x00000002 // Power-On Reset
#define SYSCTL_RESC_EXT 0x00000001 // External Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCC register.
//
//*****************************************************************************
#define SYSCTL_RCC_ACG 0x08000000 // Auto Clock Gating
#define SYSCTL_RCC_SYSDIV_M 0x07800000 // System Clock Divisor
#define SYSCTL_RCC_SYSDIV_2 0x00800000 // System clock /2
#define SYSCTL_RCC_SYSDIV_3 0x01000000 // System clock /3
#define SYSCTL_RCC_SYSDIV_4 0x01800000 // System clock /4
#define SYSCTL_RCC_SYSDIV_5 0x02000000 // System clock /5
#define SYSCTL_RCC_SYSDIV_6 0x02800000 // System clock /6
#define SYSCTL_RCC_SYSDIV_7 0x03000000 // System clock /7
#define SYSCTL_RCC_SYSDIV_8 0x03800000 // System clock /8
#define SYSCTL_RCC_SYSDIV_9 0x04000000 // System clock /9
#define SYSCTL_RCC_SYSDIV_10 0x04800000 // System clock /10
#define SYSCTL_RCC_SYSDIV_11 0x05000000 // System clock /11
#define SYSCTL_RCC_SYSDIV_12 0x05800000 // System clock /12
#define SYSCTL_RCC_SYSDIV_13 0x06000000 // System clock /13
#define SYSCTL_RCC_SYSDIV_14 0x06800000 // System clock /14
#define SYSCTL_RCC_SYSDIV_15 0x07000000 // System clock /15
#define SYSCTL_RCC_SYSDIV_16 0x07800000 // System clock /16
#define SYSCTL_RCC_USESYSDIV 0x00400000 // Enable System Clock Divider
#define SYSCTL_RCC_USEPWMDIV 0x00100000 // Enable PWM Clock Divisor
#define SYSCTL_RCC_PWMDIV_M 0x000E0000 // PWM Unit Clock Divisor
#define SYSCTL_RCC_PWMDIV_2 0x00000000 // PWM clock /2
#define SYSCTL_RCC_PWMDIV_4 0x00020000 // PWM clock /4
#define SYSCTL_RCC_PWMDIV_8 0x00040000 // PWM clock /8
#define SYSCTL_RCC_PWMDIV_16 0x00060000 // PWM clock /16
#define SYSCTL_RCC_PWMDIV_32 0x00080000 // PWM clock /32
#define SYSCTL_RCC_PWMDIV_64 0x000A0000 // PWM clock /64
#define SYSCTL_RCC_PWRDN 0x00002000 // PLL Power Down
#define SYSCTL_RCC_BYPASS 0x00000800 // PLL Bypass
#define SYSCTL_RCC_XTAL_M 0x000003C0 // Crystal Value
#define SYSCTL_RCC_XTAL_1MHZ 0x00000000 // 1 MHz
#define SYSCTL_RCC_XTAL_1_84MHZ 0x00000040 // 1.8432 MHz
#define SYSCTL_RCC_XTAL_2MHZ 0x00000080 // 2 MHz
#define SYSCTL_RCC_XTAL_2_45MHZ 0x000000C0 // 2.4576 MHz
#define SYSCTL_RCC_XTAL_3_57MHZ 0x00000100 // 3.579545 MHz
#define SYSCTL_RCC_XTAL_3_68MHZ 0x00000140 // 3.6864 MHz
#define SYSCTL_RCC_XTAL_4MHZ 0x00000180 // 4 MHz
#define SYSCTL_RCC_XTAL_4_09MHZ 0x000001C0 // 4.096 MHz
#define SYSCTL_RCC_XTAL_4_91MHZ 0x00000200 // 4.9152 MHz
#define SYSCTL_RCC_XTAL_5MHZ 0x00000240 // 5 MHz
#define SYSCTL_RCC_XTAL_5_12MHZ 0x00000280 // 5.12 MHz
#define SYSCTL_RCC_XTAL_6MHZ 0x000002C0 // 6 MHz
#define SYSCTL_RCC_XTAL_6_14MHZ 0x00000300 // 6.144 MHz
#define SYSCTL_RCC_XTAL_7_37MHZ 0x00000340 // 7.3728 MHz
#define SYSCTL_RCC_XTAL_8MHZ 0x00000380 // 8 MHz
#define SYSCTL_RCC_XTAL_8_19MHZ 0x000003C0 // 8.192 MHz
#define SYSCTL_RCC_OSCSRC_M 0x00000030 // Oscillator Source
#define SYSCTL_RCC_OSCSRC_MAIN 0x00000000 // MOSC
#define SYSCTL_RCC_OSCSRC_INT 0x00000010 // IOSC
#define SYSCTL_RCC_OSCSRC_INT4 0x00000020 // IOSC/4
#define SYSCTL_RCC_OSCSRC_30 0x00000030 // 30 kHz
#define SYSCTL_RCC_IOSCDIS 0x00000002 // Internal Oscillator Disable
#define SYSCTL_RCC_MOSCDIS 0x00000001 // Main Oscillator Disable
#define SYSCTL_RCC_SYSDIV_S 23
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PLLCFG register.
//
//*****************************************************************************
#define SYSCTL_PLLCFG_F_M 0x00003FE0 // PLL F Value
#define SYSCTL_PLLCFG_R_M 0x0000001F // PLL R Value
#define SYSCTL_PLLCFG_F_S 5
#define SYSCTL_PLLCFG_R_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCC2 register.
//
//*****************************************************************************
#define SYSCTL_RCC2_USERCC2 0x80000000 // Use RCC2
#define SYSCTL_RCC2_SYSDIV2_M 0x1F800000 // System Clock Divisor 2
#define SYSCTL_RCC2_SYSDIV2_2 0x00800000 // System clock /2
#define SYSCTL_RCC2_SYSDIV2_3 0x01000000 // System clock /3
#define SYSCTL_RCC2_SYSDIV2_4 0x01800000 // System clock /4
#define SYSCTL_RCC2_SYSDIV2_5 0x02000000 // System clock /5
#define SYSCTL_RCC2_SYSDIV2_6 0x02800000 // System clock /6
#define SYSCTL_RCC2_SYSDIV2_7 0x03000000 // System clock /7
#define SYSCTL_RCC2_SYSDIV2_8 0x03800000 // System clock /8
#define SYSCTL_RCC2_SYSDIV2_9 0x04000000 // System clock /9
#define SYSCTL_RCC2_SYSDIV2_10 0x04800000 // System clock /10
#define SYSCTL_RCC2_SYSDIV2_11 0x05000000 // System clock /11
#define SYSCTL_RCC2_SYSDIV2_12 0x05800000 // System clock /12
#define SYSCTL_RCC2_SYSDIV2_13 0x06000000 // System clock /13
#define SYSCTL_RCC2_SYSDIV2_14 0x06800000 // System clock /14
#define SYSCTL_RCC2_SYSDIV2_15 0x07000000 // System clock /15
#define SYSCTL_RCC2_SYSDIV2_16 0x07800000 // System clock /16
#define SYSCTL_RCC2_SYSDIV2_17 0x08000000 // System clock /17
#define SYSCTL_RCC2_SYSDIV2_18 0x08800000 // System clock /18
#define SYSCTL_RCC2_SYSDIV2_19 0x09000000 // System clock /19
#define SYSCTL_RCC2_SYSDIV2_20 0x09800000 // System clock /20
#define SYSCTL_RCC2_SYSDIV2_21 0x0A000000 // System clock /21
#define SYSCTL_RCC2_SYSDIV2_22 0x0A800000 // System clock /22
#define SYSCTL_RCC2_SYSDIV2_23 0x0B000000 // System clock /23
#define SYSCTL_RCC2_SYSDIV2_24 0x0B800000 // System clock /24
#define SYSCTL_RCC2_SYSDIV2_25 0x0C000000 // System clock /25
#define SYSCTL_RCC2_SYSDIV2_26 0x0C800000 // System clock /26
#define SYSCTL_RCC2_SYSDIV2_27 0x0D000000 // System clock /27
#define SYSCTL_RCC2_SYSDIV2_28 0x0D800000 // System clock /28
#define SYSCTL_RCC2_SYSDIV2_29 0x0E000000 // System clock /29
#define SYSCTL_RCC2_SYSDIV2_30 0x0E800000 // System clock /30
#define SYSCTL_RCC2_SYSDIV2_31 0x0F000000 // System clock /31
#define SYSCTL_RCC2_SYSDIV2_32 0x0F800000 // System clock /32
#define SYSCTL_RCC2_SYSDIV2_33 0x10000000 // System clock /33
#define SYSCTL_RCC2_SYSDIV2_34 0x10800000 // System clock /34
#define SYSCTL_RCC2_SYSDIV2_35 0x11000000 // System clock /35
#define SYSCTL_RCC2_SYSDIV2_36 0x11800000 // System clock /36
#define SYSCTL_RCC2_SYSDIV2_37 0x12000000 // System clock /37
#define SYSCTL_RCC2_SYSDIV2_38 0x12800000 // System clock /38
#define SYSCTL_RCC2_SYSDIV2_39 0x13000000 // System clock /39
#define SYSCTL_RCC2_SYSDIV2_40 0x13800000 // System clock /40
#define SYSCTL_RCC2_SYSDIV2_41 0x14000000 // System clock /41
#define SYSCTL_RCC2_SYSDIV2_42 0x14800000 // System clock /42
#define SYSCTL_RCC2_SYSDIV2_43 0x15000000 // System clock /43
#define SYSCTL_RCC2_SYSDIV2_44 0x15800000 // System clock /44
#define SYSCTL_RCC2_SYSDIV2_45 0x16000000 // System clock /45
#define SYSCTL_RCC2_SYSDIV2_46 0x16800000 // System clock /46
#define SYSCTL_RCC2_SYSDIV2_47 0x17000000 // System clock /47
#define SYSCTL_RCC2_SYSDIV2_48 0x17800000 // System clock /48
#define SYSCTL_RCC2_SYSDIV2_49 0x18000000 // System clock /49
#define SYSCTL_RCC2_SYSDIV2_50 0x18800000 // System clock /50
#define SYSCTL_RCC2_SYSDIV2_51 0x19000000 // System clock /51
#define SYSCTL_RCC2_SYSDIV2_52 0x19800000 // System clock /52
#define SYSCTL_RCC2_SYSDIV2_53 0x1A000000 // System clock /53
#define SYSCTL_RCC2_SYSDIV2_54 0x1A800000 // System clock /54
#define SYSCTL_RCC2_SYSDIV2_55 0x1B000000 // System clock /55
#define SYSCTL_RCC2_SYSDIV2_56 0x1B800000 // System clock /56
#define SYSCTL_RCC2_SYSDIV2_57 0x1C000000 // System clock /57
#define SYSCTL_RCC2_SYSDIV2_58 0x1C800000 // System clock /58
#define SYSCTL_RCC2_SYSDIV2_59 0x1D000000 // System clock /59
#define SYSCTL_RCC2_SYSDIV2_60 0x1D800000 // System clock /60
#define SYSCTL_RCC2_SYSDIV2_61 0x1E000000 // System clock /61
#define SYSCTL_RCC2_SYSDIV2_62 0x1E800000 // System clock /62
#define SYSCTL_RCC2_SYSDIV2_63 0x1F000000 // System clock /63
#define SYSCTL_RCC2_SYSDIV2_64 0x1F800000 // System clock /64
#define SYSCTL_RCC2_PWRDN2 0x00002000 // Power-Down PLL 2
#define SYSCTL_RCC2_BYPASS2 0x00000800 // PLL Bypass 2
#define SYSCTL_RCC2_OSCSRC2_M 0x00000070 // Oscillator Source 2
#define SYSCTL_RCC2_OSCSRC2_MO 0x00000000 // MOSC
#define SYSCTL_RCC2_OSCSRC2_IO 0x00000010 // PIOSC
#define SYSCTL_RCC2_OSCSRC2_IO4 0x00000020 // PIOSC/4
#define SYSCTL_RCC2_OSCSRC2_30 0x00000030 // 30 kHz
#define SYSCTL_RCC2_OSCSRC2_32 0x00000070 // 32.768 kHz
#define SYSCTL_RCC2_SYSDIV2_S 23
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGC0 register.
//
//*****************************************************************************
#define SYSCTL_RCGC0_CAN0 0x01000000 // CAN0 Clock Gating Control
#define SYSCTL_RCGC0_PWM 0x00100000 // PWM Clock Gating Control
#define SYSCTL_RCGC0_ADC 0x00010000 // ADC0 Clock Gating Control
#define SYSCTL_RCGC0_ADCSPD_M 0x00000300 // ADC Sample Speed
#define SYSCTL_RCGC0_ADCSPD125K 0x00000000 // 125K samples/second
#define SYSCTL_RCGC0_ADCSPD250K 0x00000100 // 250K samples/second
#define SYSCTL_RCGC0_ADCSPD500K 0x00000200 // 500K samples/second
#define SYSCTL_RCGC0_HIB 0x00000040 // HIB Clock Gating Control
#define SYSCTL_RCGC0_WDT 0x00000008 // WDT Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGC1 register.
//
//*****************************************************************************
#define SYSCTL_RCGC1_COMP0 0x01000000 // Analog Comparator 0 Clock Gating
#define SYSCTL_RCGC1_TIMER3 0x00080000 // Timer 3 Clock Gating Control
#define SYSCTL_RCGC1_TIMER2 0x00040000 // Timer 2 Clock Gating Control
#define SYSCTL_RCGC1_TIMER1 0x00020000 // Timer 1 Clock Gating Control
#define SYSCTL_RCGC1_TIMER0 0x00010000 // Timer 0 Clock Gating Control
#define SYSCTL_RCGC1_I2C0 0x00001000 // I2C0 Clock Gating Control
#define SYSCTL_RCGC1_QEI1 0x00000200 // QEI1 Clock Gating Control
#define SYSCTL_RCGC1_QEI0 0x00000100 // QEI0 Clock Gating Control
#define SYSCTL_RCGC1_SSI0 0x00000010 // SSI0 Clock Gating Control
#define SYSCTL_RCGC1_UART1 0x00000002 // UART1 Clock Gating Control
#define SYSCTL_RCGC1_UART0 0x00000001 // UART0 Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGC2 register.
//
//*****************************************************************************
#define SYSCTL_RCGC2_EPHY0 0x40000000 // PHY0 Clock Gating Control
#define SYSCTL_RCGC2_EMAC0 0x10000000 // MAC0 Clock Gating Control
#define SYSCTL_RCGC2_GPIOG 0x00000040 // Port G Clock Gating Control
#define SYSCTL_RCGC2_GPIOF 0x00000020 // Port F Clock Gating Control
#define SYSCTL_RCGC2_GPIOE 0x00000010 // Port E Clock Gating Control
#define SYSCTL_RCGC2_GPIOD 0x00000008 // Port D Clock Gating Control
#define SYSCTL_RCGC2_GPIOC 0x00000004 // Port C Clock Gating Control
#define SYSCTL_RCGC2_GPIOB 0x00000002 // Port B Clock Gating Control
#define SYSCTL_RCGC2_GPIOA 0x00000001 // Port A Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGC0 register.
//
//*****************************************************************************
#define SYSCTL_SCGC0_CAN0 0x01000000 // CAN0 Clock Gating Control
#define SYSCTL_SCGC0_PWM 0x00100000 // PWM Clock Gating Control
#define SYSCTL_SCGC0_ADC 0x00010000 // ADC0 Clock Gating Control
#define SYSCTL_SCGC0_ADCSPD_M 0x00000300 // ADC Sample Speed
#define SYSCTL_SCGC0_ADCSPD125K 0x00000000 // 125K samples/second
#define SYSCTL_SCGC0_ADCSPD250K 0x00000100 // 250K samples/second
#define SYSCTL_SCGC0_ADCSPD500K 0x00000200 // 500K samples/second
#define SYSCTL_SCGC0_HIB 0x00000040 // HIB Clock Gating Control
#define SYSCTL_SCGC0_WDT 0x00000008 // WDT Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGC1 register.
//
//*****************************************************************************
#define SYSCTL_SCGC1_COMP0 0x01000000 // Analog Comparator 0 Clock Gating
#define SYSCTL_SCGC1_TIMER3 0x00080000 // Timer 3 Clock Gating Control
#define SYSCTL_SCGC1_TIMER2 0x00040000 // Timer 2 Clock Gating Control
#define SYSCTL_SCGC1_TIMER1 0x00020000 // Timer 1 Clock Gating Control
#define SYSCTL_SCGC1_TIMER0 0x00010000 // Timer 0 Clock Gating Control
#define SYSCTL_SCGC1_I2C0 0x00001000 // I2C0 Clock Gating Control
#define SYSCTL_SCGC1_QEI1 0x00000200 // QEI1 Clock Gating Control
#define SYSCTL_SCGC1_QEI0 0x00000100 // QEI0 Clock Gating Control
#define SYSCTL_SCGC1_SSI0 0x00000010 // SSI0 Clock Gating Control
#define SYSCTL_SCGC1_UART1 0x00000002 // UART1 Clock Gating Control
#define SYSCTL_SCGC1_UART0 0x00000001 // UART0 Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGC2 register.
//
//*****************************************************************************
#define SYSCTL_SCGC2_EPHY0 0x40000000 // PHY0 Clock Gating Control
#define SYSCTL_SCGC2_EMAC0 0x10000000 // MAC0 Clock Gating Control
#define SYSCTL_SCGC2_GPIOG 0x00000040 // Port G Clock Gating Control
#define SYSCTL_SCGC2_GPIOF 0x00000020 // Port F Clock Gating Control
#define SYSCTL_SCGC2_GPIOE 0x00000010 // Port E Clock Gating Control
#define SYSCTL_SCGC2_GPIOD 0x00000008 // Port D Clock Gating Control
#define SYSCTL_SCGC2_GPIOC 0x00000004 // Port C Clock Gating Control
#define SYSCTL_SCGC2_GPIOB 0x00000002 // Port B Clock Gating Control
#define SYSCTL_SCGC2_GPIOA 0x00000001 // Port A Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGC0 register.
//
//*****************************************************************************
#define SYSCTL_DCGC0_CAN0 0x01000000 // CAN0 Clock Gating Control
#define SYSCTL_DCGC0_PWM 0x00100000 // PWM Clock Gating Control
#define SYSCTL_DCGC0_ADC 0x00010000 // ADC0 Clock Gating Control
#define SYSCTL_DCGC0_HIB 0x00000040 // HIB Clock Gating Control
#define SYSCTL_DCGC0_WDT 0x00000008 // WDT Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGC1 register.
//
//*****************************************************************************
#define SYSCTL_DCGC1_COMP0 0x01000000 // Analog Comparator 0 Clock Gating
#define SYSCTL_DCGC1_TIMER3 0x00080000 // Timer 3 Clock Gating Control
#define SYSCTL_DCGC1_TIMER2 0x00040000 // Timer 2 Clock Gating Control
#define SYSCTL_DCGC1_TIMER1 0x00020000 // Timer 1 Clock Gating Control
#define SYSCTL_DCGC1_TIMER0 0x00010000 // Timer 0 Clock Gating Control
#define SYSCTL_DCGC1_I2C0 0x00001000 // I2C0 Clock Gating Control
#define SYSCTL_DCGC1_QEI1 0x00000200 // QEI1 Clock Gating Control
#define SYSCTL_DCGC1_QEI0 0x00000100 // QEI0 Clock Gating Control
#define SYSCTL_DCGC1_SSI0 0x00000010 // SSI0 Clock Gating Control
#define SYSCTL_DCGC1_UART1 0x00000002 // UART1 Clock Gating Control
#define SYSCTL_DCGC1_UART0 0x00000001 // UART0 Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGC2 register.
//
//*****************************************************************************
#define SYSCTL_DCGC2_EPHY0 0x40000000 // PHY0 Clock Gating Control
#define SYSCTL_DCGC2_EMAC0 0x10000000 // MAC0 Clock Gating Control
#define SYSCTL_DCGC2_GPIOG 0x00000040 // Port G Clock Gating Control
#define SYSCTL_DCGC2_GPIOF 0x00000020 // Port F Clock Gating Control
#define SYSCTL_DCGC2_GPIOE 0x00000010 // Port E Clock Gating Control
#define SYSCTL_DCGC2_GPIOD 0x00000008 // Port D Clock Gating Control
#define SYSCTL_DCGC2_GPIOC 0x00000004 // Port C Clock Gating Control
#define SYSCTL_DCGC2_GPIOB 0x00000002 // Port B Clock Gating Control
#define SYSCTL_DCGC2_GPIOA 0x00000001 // Port A Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DSLPCLKCFG
// register.
//
//*****************************************************************************
#define SYSCTL_DSLPCLKCFG_D_M 0x1F800000 // Divider Field Override
#define SYSCTL_DSLPCLKCFG_D_1 0x00000000 // System clock /1
#define SYSCTL_DSLPCLKCFG_D_2 0x00800000 // System clock /2
#define SYSCTL_DSLPCLKCFG_D_3 0x01000000 // System clock /3
#define SYSCTL_DSLPCLKCFG_D_4 0x01800000 // System clock /4
#define SYSCTL_DSLPCLKCFG_D_5 0x02000000 // System clock /5
#define SYSCTL_DSLPCLKCFG_D_6 0x02800000 // System clock /6
#define SYSCTL_DSLPCLKCFG_D_7 0x03000000 // System clock /7
#define SYSCTL_DSLPCLKCFG_D_8 0x03800000 // System clock /8
#define SYSCTL_DSLPCLKCFG_D_9 0x04000000 // System clock /9
#define SYSCTL_DSLPCLKCFG_D_10 0x04800000 // System clock /10
#define SYSCTL_DSLPCLKCFG_D_11 0x05000000 // System clock /11
#define SYSCTL_DSLPCLKCFG_D_12 0x05800000 // System clock /12
#define SYSCTL_DSLPCLKCFG_D_13 0x06000000 // System clock /13
#define SYSCTL_DSLPCLKCFG_D_14 0x06800000 // System clock /14
#define SYSCTL_DSLPCLKCFG_D_15 0x07000000 // System clock /15
#define SYSCTL_DSLPCLKCFG_D_16 0x07800000 // System clock /16
#define SYSCTL_DSLPCLKCFG_D_17 0x08000000 // System clock /17
#define SYSCTL_DSLPCLKCFG_D_18 0x08800000 // System clock /18
#define SYSCTL_DSLPCLKCFG_D_19 0x09000000 // System clock /19
#define SYSCTL_DSLPCLKCFG_D_20 0x09800000 // System clock /20
#define SYSCTL_DSLPCLKCFG_D_21 0x0A000000 // System clock /21
#define SYSCTL_DSLPCLKCFG_D_22 0x0A800000 // System clock /22
#define SYSCTL_DSLPCLKCFG_D_23 0x0B000000 // System clock /23
#define SYSCTL_DSLPCLKCFG_D_24 0x0B800000 // System clock /24
#define SYSCTL_DSLPCLKCFG_D_25 0x0C000000 // System clock /25
#define SYSCTL_DSLPCLKCFG_D_26 0x0C800000 // System clock /26
#define SYSCTL_DSLPCLKCFG_D_27 0x0D000000 // System clock /27
#define SYSCTL_DSLPCLKCFG_D_28 0x0D800000 // System clock /28
#define SYSCTL_DSLPCLKCFG_D_29 0x0E000000 // System clock /29
#define SYSCTL_DSLPCLKCFG_D_30 0x0E800000 // System clock /30
#define SYSCTL_DSLPCLKCFG_D_31 0x0F000000 // System clock /31
#define SYSCTL_DSLPCLKCFG_D_32 0x0F800000 // System clock /32
#define SYSCTL_DSLPCLKCFG_D_33 0x10000000 // System clock /33
#define SYSCTL_DSLPCLKCFG_D_34 0x10800000 // System clock /34
#define SYSCTL_DSLPCLKCFG_D_35 0x11000000 // System clock /35
#define SYSCTL_DSLPCLKCFG_D_36 0x11800000 // System clock /36
#define SYSCTL_DSLPCLKCFG_D_37 0x12000000 // System clock /37
#define SYSCTL_DSLPCLKCFG_D_38 0x12800000 // System clock /38
#define SYSCTL_DSLPCLKCFG_D_39 0x13000000 // System clock /39
#define SYSCTL_DSLPCLKCFG_D_40 0x13800000 // System clock /40
#define SYSCTL_DSLPCLKCFG_D_41 0x14000000 // System clock /41
#define SYSCTL_DSLPCLKCFG_D_42 0x14800000 // System clock /42
#define SYSCTL_DSLPCLKCFG_D_43 0x15000000 // System clock /43
#define SYSCTL_DSLPCLKCFG_D_44 0x15800000 // System clock /44
#define SYSCTL_DSLPCLKCFG_D_45 0x16000000 // System clock /45
#define SYSCTL_DSLPCLKCFG_D_46 0x16800000 // System clock /46
#define SYSCTL_DSLPCLKCFG_D_47 0x17000000 // System clock /47
#define SYSCTL_DSLPCLKCFG_D_48 0x17800000 // System clock /48
#define SYSCTL_DSLPCLKCFG_D_49 0x18000000 // System clock /49
#define SYSCTL_DSLPCLKCFG_D_50 0x18800000 // System clock /50
#define SYSCTL_DSLPCLKCFG_D_51 0x19000000 // System clock /51
#define SYSCTL_DSLPCLKCFG_D_52 0x19800000 // System clock /52
#define SYSCTL_DSLPCLKCFG_D_53 0x1A000000 // System clock /53
#define SYSCTL_DSLPCLKCFG_D_54 0x1A800000 // System clock /54
#define SYSCTL_DSLPCLKCFG_D_55 0x1B000000 // System clock /55
#define SYSCTL_DSLPCLKCFG_D_56 0x1B800000 // System clock /56
#define SYSCTL_DSLPCLKCFG_D_57 0x1C000000 // System clock /57
#define SYSCTL_DSLPCLKCFG_D_58 0x1C800000 // System clock /58
#define SYSCTL_DSLPCLKCFG_D_59 0x1D000000 // System clock /59
#define SYSCTL_DSLPCLKCFG_D_60 0x1D800000 // System clock /60
#define SYSCTL_DSLPCLKCFG_D_61 0x1E000000 // System clock /61
#define SYSCTL_DSLPCLKCFG_D_62 0x1E800000 // System clock /62
#define SYSCTL_DSLPCLKCFG_D_63 0x1F000000 // System clock /63
#define SYSCTL_DSLPCLKCFG_D_64 0x1F800000 // System clock /64
#define SYSCTL_DSLPCLKCFG_O_M 0x00000070 // Clock Source
#define SYSCTL_DSLPCLKCFG_O_IGN 0x00000000 // MOSC
#define SYSCTL_DSLPCLKCFG_O_IO 0x00000010 // PIOSC
#define SYSCTL_DSLPCLKCFG_O_30 0x00000030 // 30 kHz
#define SYSCTL_DSLPCLKCFG_O_32 0x00000070 // 32.768 kHz
#define SYSCTL_DSLPCLKCFG_D_S 23
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_INT_TYPE register.
//
//*****************************************************************************
#define NVIC_INT_TYPE_LINES_M 0x0000001F // Number of interrupt lines (x32)
#define NVIC_INT_TYPE_LINES_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_ST_CTRL register.
//
//*****************************************************************************
#define NVIC_ST_CTRL_COUNT 0x00010000 // Count flag
#define NVIC_ST_CTRL_CLK_SRC 0x00000004 // Clock Source
#define NVIC_ST_CTRL_INTEN 0x00000002 // Interrupt enable
#define NVIC_ST_CTRL_ENABLE 0x00000001 // Counter mode
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_ST_RELOAD register.
//
//*****************************************************************************
#define NVIC_ST_RELOAD_M 0x00FFFFFF // Counter load value
#define NVIC_ST_RELOAD_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_ST_CURRENT
// register.
//
//*****************************************************************************
#define NVIC_ST_CURRENT_M 0x00FFFFFF // Counter current value
#define NVIC_ST_CURRENT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_ST_CAL register.
//
//*****************************************************************************
#define NVIC_ST_CAL_NOREF 0x80000000 // No reference clock
#define NVIC_ST_CAL_SKEW 0x40000000 // Clock skew
#define NVIC_ST_CAL_ONEMS_M 0x00FFFFFF // 1ms reference value
#define NVIC_ST_CAL_ONEMS_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_EN0 register.
//
//*****************************************************************************
#define NVIC_EN0_INT31 0x80000000 // Interrupt 31 enable
#define NVIC_EN0_INT30 0x40000000 // Interrupt 30 enable
#define NVIC_EN0_INT29 0x20000000 // Interrupt 29 enable
#define NVIC_EN0_INT28 0x10000000 // Interrupt 28 enable
#define NVIC_EN0_INT27 0x08000000 // Interrupt 27 enable
#define NVIC_EN0_INT26 0x04000000 // Interrupt 26 enable
#define NVIC_EN0_INT25 0x02000000 // Interrupt 25 enable
#define NVIC_EN0_INT24 0x01000000 // Interrupt 24 enable
#define NVIC_EN0_INT23 0x00800000 // Interrupt 23 enable
#define NVIC_EN0_INT22 0x00400000 // Interrupt 22 enable
#define NVIC_EN0_INT21 0x00200000 // Interrupt 21 enable
#define NVIC_EN0_INT20 0x00100000 // Interrupt 20 enable
#define NVIC_EN0_INT19 0x00080000 // Interrupt 19 enable
#define NVIC_EN0_INT18 0x00040000 // Interrupt 18 enable
#define NVIC_EN0_INT17 0x00020000 // Interrupt 17 enable
#define NVIC_EN0_INT16 0x00010000 // Interrupt 16 enable
#define NVIC_EN0_INT15 0x00008000 // Interrupt 15 enable
#define NVIC_EN0_INT14 0x00004000 // Interrupt 14 enable
#define NVIC_EN0_INT13 0x00002000 // Interrupt 13 enable
#define NVIC_EN0_INT12 0x00001000 // Interrupt 12 enable
#define NVIC_EN0_INT11 0x00000800 // Interrupt 11 enable
#define NVIC_EN0_INT10 0x00000400 // Interrupt 10 enable
#define NVIC_EN0_INT9 0x00000200 // Interrupt 9 enable
#define NVIC_EN0_INT8 0x00000100 // Interrupt 8 enable
#define NVIC_EN0_INT7 0x00000080 // Interrupt 7 enable
#define NVIC_EN0_INT6 0x00000040 // Interrupt 6 enable
#define NVIC_EN0_INT5 0x00000020 // Interrupt 5 enable
#define NVIC_EN0_INT4 0x00000010 // Interrupt 4 enable
#define NVIC_EN0_INT3 0x00000008 // Interrupt 3 enable
#define NVIC_EN0_INT2 0x00000004 // Interrupt 2 enable
#define NVIC_EN0_INT1 0x00000002 // Interrupt 1 enable
#define NVIC_EN0_INT0 0x00000001 // Interrupt 0 enable
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_EN1 register.
//
//*****************************************************************************
#define NVIC_EN1_INT59 0x08000000 // Interrupt 59 enable
#define NVIC_EN1_INT58 0x04000000 // Interrupt 58 enable
#define NVIC_EN1_INT57 0x02000000 // Interrupt 57 enable
#define NVIC_EN1_INT56 0x01000000 // Interrupt 56 enable
#define NVIC_EN1_INT55 0x00800000 // Interrupt 55 enable
#define NVIC_EN1_INT54 0x00400000 // Interrupt 54 enable
#define NVIC_EN1_INT53 0x00200000 // Interrupt 53 enable
#define NVIC_EN1_INT52 0x00100000 // Interrupt 52 enable
#define NVIC_EN1_INT51 0x00080000 // Interrupt 51 enable
#define NVIC_EN1_INT50 0x00040000 // Interrupt 50 enable
#define NVIC_EN1_INT49 0x00020000 // Interrupt 49 enable
#define NVIC_EN1_INT48 0x00010000 // Interrupt 48 enable
#define NVIC_EN1_INT47 0x00008000 // Interrupt 47 enable
#define NVIC_EN1_INT46 0x00004000 // Interrupt 46 enable
#define NVIC_EN1_INT45 0x00002000 // Interrupt 45 enable
#define NVIC_EN1_INT44 0x00001000 // Interrupt 44 enable
#define NVIC_EN1_INT43 0x00000800 // Interrupt 43 enable
#define NVIC_EN1_INT42 0x00000400 // Interrupt 42 enable
#define NVIC_EN1_INT41 0x00000200 // Interrupt 41 enable
#define NVIC_EN1_INT40 0x00000100 // Interrupt 40 enable
#define NVIC_EN1_INT39 0x00000080 // Interrupt 39 enable
#define NVIC_EN1_INT38 0x00000040 // Interrupt 38 enable
#define NVIC_EN1_INT37 0x00000020 // Interrupt 37 enable
#define NVIC_EN1_INT36 0x00000010 // Interrupt 36 enable
#define NVIC_EN1_INT35 0x00000008 // Interrupt 35 enable
#define NVIC_EN1_INT34 0x00000004 // Interrupt 34 enable
#define NVIC_EN1_INT33 0x00000002 // Interrupt 33 enable
#define NVIC_EN1_INT32 0x00000001 // Interrupt 32 enable
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_DIS0 register.
//
//*****************************************************************************
#define NVIC_DIS0_INT31 0x80000000 // Interrupt 31 disable
#define NVIC_DIS0_INT30 0x40000000 // Interrupt 30 disable
#define NVIC_DIS0_INT29 0x20000000 // Interrupt 29 disable
#define NVIC_DIS0_INT28 0x10000000 // Interrupt 28 disable
#define NVIC_DIS0_INT27 0x08000000 // Interrupt 27 disable
#define NVIC_DIS0_INT26 0x04000000 // Interrupt 26 disable
#define NVIC_DIS0_INT25 0x02000000 // Interrupt 25 disable
#define NVIC_DIS0_INT24 0x01000000 // Interrupt 24 disable
#define NVIC_DIS0_INT23 0x00800000 // Interrupt 23 disable
#define NVIC_DIS0_INT22 0x00400000 // Interrupt 22 disable
#define NVIC_DIS0_INT21 0x00200000 // Interrupt 21 disable
#define NVIC_DIS0_INT20 0x00100000 // Interrupt 20 disable
#define NVIC_DIS0_INT19 0x00080000 // Interrupt 19 disable
#define NVIC_DIS0_INT18 0x00040000 // Interrupt 18 disable
#define NVIC_DIS0_INT17 0x00020000 // Interrupt 17 disable
#define NVIC_DIS0_INT16 0x00010000 // Interrupt 16 disable
#define NVIC_DIS0_INT15 0x00008000 // Interrupt 15 disable
#define NVIC_DIS0_INT14 0x00004000 // Interrupt 14 disable
#define NVIC_DIS0_INT13 0x00002000 // Interrupt 13 disable
#define NVIC_DIS0_INT12 0x00001000 // Interrupt 12 disable
#define NVIC_DIS0_INT11 0x00000800 // Interrupt 11 disable
#define NVIC_DIS0_INT10 0x00000400 // Interrupt 10 disable
#define NVIC_DIS0_INT9 0x00000200 // Interrupt 9 disable
#define NVIC_DIS0_INT8 0x00000100 // Interrupt 8 disable
#define NVIC_DIS0_INT7 0x00000080 // Interrupt 7 disable
#define NVIC_DIS0_INT6 0x00000040 // Interrupt 6 disable
#define NVIC_DIS0_INT5 0x00000020 // Interrupt 5 disable
#define NVIC_DIS0_INT4 0x00000010 // Interrupt 4 disable
#define NVIC_DIS0_INT3 0x00000008 // Interrupt 3 disable
#define NVIC_DIS0_INT2 0x00000004 // Interrupt 2 disable
#define NVIC_DIS0_INT1 0x00000002 // Interrupt 1 disable
#define NVIC_DIS0_INT0 0x00000001 // Interrupt 0 disable
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_DIS1 register.
//
//*****************************************************************************
#define NVIC_DIS1_INT59 0x08000000 // Interrupt 59 disable
#define NVIC_DIS1_INT58 0x04000000 // Interrupt 58 disable
#define NVIC_DIS1_INT57 0x02000000 // Interrupt 57 disable
#define NVIC_DIS1_INT56 0x01000000 // Interrupt 56 disable
#define NVIC_DIS1_INT55 0x00800000 // Interrupt 55 disable
#define NVIC_DIS1_INT54 0x00400000 // Interrupt 54 disable
#define NVIC_DIS1_INT53 0x00200000 // Interrupt 53 disable
#define NVIC_DIS1_INT52 0x00100000 // Interrupt 52 disable
#define NVIC_DIS1_INT51 0x00080000 // Interrupt 51 disable
#define NVIC_DIS1_INT50 0x00040000 // Interrupt 50 disable
#define NVIC_DIS1_INT49 0x00020000 // Interrupt 49 disable
#define NVIC_DIS1_INT48 0x00010000 // Interrupt 48 disable
#define NVIC_DIS1_INT47 0x00008000 // Interrupt 47 disable
#define NVIC_DIS1_INT46 0x00004000 // Interrupt 46 disable
#define NVIC_DIS1_INT45 0x00002000 // Interrupt 45 disable
#define NVIC_DIS1_INT44 0x00001000 // Interrupt 44 disable
#define NVIC_DIS1_INT43 0x00000800 // Interrupt 43 disable
#define NVIC_DIS1_INT42 0x00000400 // Interrupt 42 disable
#define NVIC_DIS1_INT41 0x00000200 // Interrupt 41 disable
#define NVIC_DIS1_INT40 0x00000100 // Interrupt 40 disable
#define NVIC_DIS1_INT39 0x00000080 // Interrupt 39 disable
#define NVIC_DIS1_INT38 0x00000040 // Interrupt 38 disable
#define NVIC_DIS1_INT37 0x00000020 // Interrupt 37 disable
#define NVIC_DIS1_INT36 0x00000010 // Interrupt 36 disable
#define NVIC_DIS1_INT35 0x00000008 // Interrupt 35 disable
#define NVIC_DIS1_INT34 0x00000004 // Interrupt 34 disable
#define NVIC_DIS1_INT33 0x00000002 // Interrupt 33 disable
#define NVIC_DIS1_INT32 0x00000001 // Interrupt 32 disable
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PEND0 register.
//
//*****************************************************************************
#define NVIC_PEND0_INT31 0x80000000 // Interrupt 31 pend
#define NVIC_PEND0_INT30 0x40000000 // Interrupt 30 pend
#define NVIC_PEND0_INT29 0x20000000 // Interrupt 29 pend
#define NVIC_PEND0_INT28 0x10000000 // Interrupt 28 pend
#define NVIC_PEND0_INT27 0x08000000 // Interrupt 27 pend
#define NVIC_PEND0_INT26 0x04000000 // Interrupt 26 pend
#define NVIC_PEND0_INT25 0x02000000 // Interrupt 25 pend
#define NVIC_PEND0_INT24 0x01000000 // Interrupt 24 pend
#define NVIC_PEND0_INT23 0x00800000 // Interrupt 23 pend
#define NVIC_PEND0_INT22 0x00400000 // Interrupt 22 pend
#define NVIC_PEND0_INT21 0x00200000 // Interrupt 21 pend
#define NVIC_PEND0_INT20 0x00100000 // Interrupt 20 pend
#define NVIC_PEND0_INT19 0x00080000 // Interrupt 19 pend
#define NVIC_PEND0_INT18 0x00040000 // Interrupt 18 pend
#define NVIC_PEND0_INT17 0x00020000 // Interrupt 17 pend
#define NVIC_PEND0_INT16 0x00010000 // Interrupt 16 pend
#define NVIC_PEND0_INT15 0x00008000 // Interrupt 15 pend
#define NVIC_PEND0_INT14 0x00004000 // Interrupt 14 pend
#define NVIC_PEND0_INT13 0x00002000 // Interrupt 13 pend
#define NVIC_PEND0_INT12 0x00001000 // Interrupt 12 pend
#define NVIC_PEND0_INT11 0x00000800 // Interrupt 11 pend
#define NVIC_PEND0_INT10 0x00000400 // Interrupt 10 pend
#define NVIC_PEND0_INT9 0x00000200 // Interrupt 9 pend
#define NVIC_PEND0_INT8 0x00000100 // Interrupt 8 pend
#define NVIC_PEND0_INT7 0x00000080 // Interrupt 7 pend
#define NVIC_PEND0_INT6 0x00000040 // Interrupt 6 pend
#define NVIC_PEND0_INT5 0x00000020 // Interrupt 5 pend
#define NVIC_PEND0_INT4 0x00000010 // Interrupt 4 pend
#define NVIC_PEND0_INT3 0x00000008 // Interrupt 3 pend
#define NVIC_PEND0_INT2 0x00000004 // Interrupt 2 pend
#define NVIC_PEND0_INT1 0x00000002 // Interrupt 1 pend
#define NVIC_PEND0_INT0 0x00000001 // Interrupt 0 pend
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PEND1 register.
//
//*****************************************************************************
#define NVIC_PEND1_INT59 0x08000000 // Interrupt 59 pend
#define NVIC_PEND1_INT58 0x04000000 // Interrupt 58 pend
#define NVIC_PEND1_INT57 0x02000000 // Interrupt 57 pend
#define NVIC_PEND1_INT56 0x01000000 // Interrupt 56 pend
#define NVIC_PEND1_INT55 0x00800000 // Interrupt 55 pend
#define NVIC_PEND1_INT54 0x00400000 // Interrupt 54 pend
#define NVIC_PEND1_INT53 0x00200000 // Interrupt 53 pend
#define NVIC_PEND1_INT52 0x00100000 // Interrupt 52 pend
#define NVIC_PEND1_INT51 0x00080000 // Interrupt 51 pend
#define NVIC_PEND1_INT50 0x00040000 // Interrupt 50 pend
#define NVIC_PEND1_INT49 0x00020000 // Interrupt 49 pend
#define NVIC_PEND1_INT48 0x00010000 // Interrupt 48 pend
#define NVIC_PEND1_INT47 0x00008000 // Interrupt 47 pend
#define NVIC_PEND1_INT46 0x00004000 // Interrupt 46 pend
#define NVIC_PEND1_INT45 0x00002000 // Interrupt 45 pend
#define NVIC_PEND1_INT44 0x00001000 // Interrupt 44 pend
#define NVIC_PEND1_INT43 0x00000800 // Interrupt 43 pend
#define NVIC_PEND1_INT42 0x00000400 // Interrupt 42 pend
#define NVIC_PEND1_INT41 0x00000200 // Interrupt 41 pend
#define NVIC_PEND1_INT40 0x00000100 // Interrupt 40 pend
#define NVIC_PEND1_INT39 0x00000080 // Interrupt 39 pend
#define NVIC_PEND1_INT38 0x00000040 // Interrupt 38 pend
#define NVIC_PEND1_INT37 0x00000020 // Interrupt 37 pend
#define NVIC_PEND1_INT36 0x00000010 // Interrupt 36 pend
#define NVIC_PEND1_INT35 0x00000008 // Interrupt 35 pend
#define NVIC_PEND1_INT34 0x00000004 // Interrupt 34 pend
#define NVIC_PEND1_INT33 0x00000002 // Interrupt 33 pend
#define NVIC_PEND1_INT32 0x00000001 // Interrupt 32 pend
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_UNPEND0 register.
//
//*****************************************************************************
#define NVIC_UNPEND0_INT31 0x80000000 // Interrupt 31 unpend
#define NVIC_UNPEND0_INT30 0x40000000 // Interrupt 30 unpend
#define NVIC_UNPEND0_INT29 0x20000000 // Interrupt 29 unpend
#define NVIC_UNPEND0_INT28 0x10000000 // Interrupt 28 unpend
#define NVIC_UNPEND0_INT27 0x08000000 // Interrupt 27 unpend
#define NVIC_UNPEND0_INT26 0x04000000 // Interrupt 26 unpend
#define NVIC_UNPEND0_INT25 0x02000000 // Interrupt 25 unpend
#define NVIC_UNPEND0_INT24 0x01000000 // Interrupt 24 unpend
#define NVIC_UNPEND0_INT23 0x00800000 // Interrupt 23 unpend
#define NVIC_UNPEND0_INT22 0x00400000 // Interrupt 22 unpend
#define NVIC_UNPEND0_INT21 0x00200000 // Interrupt 21 unpend
#define NVIC_UNPEND0_INT20 0x00100000 // Interrupt 20 unpend
#define NVIC_UNPEND0_INT19 0x00080000 // Interrupt 19 unpend
#define NVIC_UNPEND0_INT18 0x00040000 // Interrupt 18 unpend
#define NVIC_UNPEND0_INT17 0x00020000 // Interrupt 17 unpend
#define NVIC_UNPEND0_INT16 0x00010000 // Interrupt 16 unpend
#define NVIC_UNPEND0_INT15 0x00008000 // Interrupt 15 unpend
#define NVIC_UNPEND0_INT14 0x00004000 // Interrupt 14 unpend
#define NVIC_UNPEND0_INT13 0x00002000 // Interrupt 13 unpend
#define NVIC_UNPEND0_INT12 0x00001000 // Interrupt 12 unpend
#define NVIC_UNPEND0_INT11 0x00000800 // Interrupt 11 unpend
#define NVIC_UNPEND0_INT10 0x00000400 // Interrupt 10 unpend
#define NVIC_UNPEND0_INT9 0x00000200 // Interrupt 9 unpend
#define NVIC_UNPEND0_INT8 0x00000100 // Interrupt 8 unpend
#define NVIC_UNPEND0_INT7 0x00000080 // Interrupt 7 unpend
#define NVIC_UNPEND0_INT6 0x00000040 // Interrupt 6 unpend
#define NVIC_UNPEND0_INT5 0x00000020 // Interrupt 5 unpend
#define NVIC_UNPEND0_INT4 0x00000010 // Interrupt 4 unpend
#define NVIC_UNPEND0_INT3 0x00000008 // Interrupt 3 unpend
#define NVIC_UNPEND0_INT2 0x00000004 // Interrupt 2 unpend
#define NVIC_UNPEND0_INT1 0x00000002 // Interrupt 1 unpend
#define NVIC_UNPEND0_INT0 0x00000001 // Interrupt 0 unpend
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_UNPEND1 register.
//
//*****************************************************************************
#define NVIC_UNPEND1_INT59 0x08000000 // Interrupt 59 unpend
#define NVIC_UNPEND1_INT58 0x04000000 // Interrupt 58 unpend
#define NVIC_UNPEND1_INT57 0x02000000 // Interrupt 57 unpend
#define NVIC_UNPEND1_INT56 0x01000000 // Interrupt 56 unpend
#define NVIC_UNPEND1_INT55 0x00800000 // Interrupt 55 unpend
#define NVIC_UNPEND1_INT54 0x00400000 // Interrupt 54 unpend
#define NVIC_UNPEND1_INT53 0x00200000 // Interrupt 53 unpend
#define NVIC_UNPEND1_INT52 0x00100000 // Interrupt 52 unpend
#define NVIC_UNPEND1_INT51 0x00080000 // Interrupt 51 unpend
#define NVIC_UNPEND1_INT50 0x00040000 // Interrupt 50 unpend
#define NVIC_UNPEND1_INT49 0x00020000 // Interrupt 49 unpend
#define NVIC_UNPEND1_INT48 0x00010000 // Interrupt 48 unpend
#define NVIC_UNPEND1_INT47 0x00008000 // Interrupt 47 unpend
#define NVIC_UNPEND1_INT46 0x00004000 // Interrupt 46 unpend
#define NVIC_UNPEND1_INT45 0x00002000 // Interrupt 45 unpend
#define NVIC_UNPEND1_INT44 0x00001000 // Interrupt 44 unpend
#define NVIC_UNPEND1_INT43 0x00000800 // Interrupt 43 unpend
#define NVIC_UNPEND1_INT42 0x00000400 // Interrupt 42 unpend
#define NVIC_UNPEND1_INT41 0x00000200 // Interrupt 41 unpend
#define NVIC_UNPEND1_INT40 0x00000100 // Interrupt 40 unpend
#define NVIC_UNPEND1_INT39 0x00000080 // Interrupt 39 unpend
#define NVIC_UNPEND1_INT38 0x00000040 // Interrupt 38 unpend
#define NVIC_UNPEND1_INT37 0x00000020 // Interrupt 37 unpend
#define NVIC_UNPEND1_INT36 0x00000010 // Interrupt 36 unpend
#define NVIC_UNPEND1_INT35 0x00000008 // Interrupt 35 unpend
#define NVIC_UNPEND1_INT34 0x00000004 // Interrupt 34 unpend
#define NVIC_UNPEND1_INT33 0x00000002 // Interrupt 33 unpend
#define NVIC_UNPEND1_INT32 0x00000001 // Interrupt 32 unpend
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_ACTIVE0 register.
//
//*****************************************************************************
#define NVIC_ACTIVE0_INT31 0x80000000 // Interrupt 31 active
#define NVIC_ACTIVE0_INT30 0x40000000 // Interrupt 30 active
#define NVIC_ACTIVE0_INT29 0x20000000 // Interrupt 29 active
#define NVIC_ACTIVE0_INT28 0x10000000 // Interrupt 28 active
#define NVIC_ACTIVE0_INT27 0x08000000 // Interrupt 27 active
#define NVIC_ACTIVE0_INT26 0x04000000 // Interrupt 26 active
#define NVIC_ACTIVE0_INT25 0x02000000 // Interrupt 25 active
#define NVIC_ACTIVE0_INT24 0x01000000 // Interrupt 24 active
#define NVIC_ACTIVE0_INT23 0x00800000 // Interrupt 23 active
#define NVIC_ACTIVE0_INT22 0x00400000 // Interrupt 22 active
#define NVIC_ACTIVE0_INT21 0x00200000 // Interrupt 21 active
#define NVIC_ACTIVE0_INT20 0x00100000 // Interrupt 20 active
#define NVIC_ACTIVE0_INT19 0x00080000 // Interrupt 19 active
#define NVIC_ACTIVE0_INT18 0x00040000 // Interrupt 18 active
#define NVIC_ACTIVE0_INT17 0x00020000 // Interrupt 17 active
#define NVIC_ACTIVE0_INT16 0x00010000 // Interrupt 16 active
#define NVIC_ACTIVE0_INT15 0x00008000 // Interrupt 15 active
#define NVIC_ACTIVE0_INT14 0x00004000 // Interrupt 14 active
#define NVIC_ACTIVE0_INT13 0x00002000 // Interrupt 13 active
#define NVIC_ACTIVE0_INT12 0x00001000 // Interrupt 12 active
#define NVIC_ACTIVE0_INT11 0x00000800 // Interrupt 11 active
#define NVIC_ACTIVE0_INT10 0x00000400 // Interrupt 10 active
#define NVIC_ACTIVE0_INT9 0x00000200 // Interrupt 9 active
#define NVIC_ACTIVE0_INT8 0x00000100 // Interrupt 8 active
#define NVIC_ACTIVE0_INT7 0x00000080 // Interrupt 7 active
#define NVIC_ACTIVE0_INT6 0x00000040 // Interrupt 6 active
#define NVIC_ACTIVE0_INT5 0x00000020 // Interrupt 5 active
#define NVIC_ACTIVE0_INT4 0x00000010 // Interrupt 4 active
#define NVIC_ACTIVE0_INT3 0x00000008 // Interrupt 3 active
#define NVIC_ACTIVE0_INT2 0x00000004 // Interrupt 2 active
#define NVIC_ACTIVE0_INT1 0x00000002 // Interrupt 1 active
#define NVIC_ACTIVE0_INT0 0x00000001 // Interrupt 0 active
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_ACTIVE1 register.
//
//*****************************************************************************
#define NVIC_ACTIVE1_INT59 0x08000000 // Interrupt 59 active
#define NVIC_ACTIVE1_INT58 0x04000000 // Interrupt 58 active
#define NVIC_ACTIVE1_INT57 0x02000000 // Interrupt 57 active
#define NVIC_ACTIVE1_INT56 0x01000000 // Interrupt 56 active
#define NVIC_ACTIVE1_INT55 0x00800000 // Interrupt 55 active
#define NVIC_ACTIVE1_INT54 0x00400000 // Interrupt 54 active
#define NVIC_ACTIVE1_INT53 0x00200000 // Interrupt 53 active
#define NVIC_ACTIVE1_INT52 0x00100000 // Interrupt 52 active
#define NVIC_ACTIVE1_INT51 0x00080000 // Interrupt 51 active
#define NVIC_ACTIVE1_INT50 0x00040000 // Interrupt 50 active
#define NVIC_ACTIVE1_INT49 0x00020000 // Interrupt 49 active
#define NVIC_ACTIVE1_INT48 0x00010000 // Interrupt 48 active
#define NVIC_ACTIVE1_INT47 0x00008000 // Interrupt 47 active
#define NVIC_ACTIVE1_INT46 0x00004000 // Interrupt 46 active
#define NVIC_ACTIVE1_INT45 0x00002000 // Interrupt 45 active
#define NVIC_ACTIVE1_INT44 0x00001000 // Interrupt 44 active
#define NVIC_ACTIVE1_INT43 0x00000800 // Interrupt 43 active
#define NVIC_ACTIVE1_INT42 0x00000400 // Interrupt 42 active
#define NVIC_ACTIVE1_INT41 0x00000200 // Interrupt 41 active
#define NVIC_ACTIVE1_INT40 0x00000100 // Interrupt 40 active
#define NVIC_ACTIVE1_INT39 0x00000080 // Interrupt 39 active
#define NVIC_ACTIVE1_INT38 0x00000040 // Interrupt 38 active
#define NVIC_ACTIVE1_INT37 0x00000020 // Interrupt 37 active
#define NVIC_ACTIVE1_INT36 0x00000010 // Interrupt 36 active
#define NVIC_ACTIVE1_INT35 0x00000008 // Interrupt 35 active
#define NVIC_ACTIVE1_INT34 0x00000004 // Interrupt 34 active
#define NVIC_ACTIVE1_INT33 0x00000002 // Interrupt 33 active
#define NVIC_ACTIVE1_INT32 0x00000001 // Interrupt 32 active
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI0 register.
//
//*****************************************************************************
#define NVIC_PRI0_INT3_M 0xFF000000 // Interrupt 3 priority mask
#define NVIC_PRI0_INT2_M 0x00FF0000 // Interrupt 2 priority mask
#define NVIC_PRI0_INT1_M 0x0000FF00 // Interrupt 1 priority mask
#define NVIC_PRI0_INT0_M 0x000000FF // Interrupt 0 priority mask
#define NVIC_PRI0_INT3_S 24
#define NVIC_PRI0_INT2_S 16
#define NVIC_PRI0_INT1_S 8
#define NVIC_PRI0_INT0_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI1 register.
//
//*****************************************************************************
#define NVIC_PRI1_INT7_M 0xFF000000 // Interrupt 7 priority mask
#define NVIC_PRI1_INT6_M 0x00FF0000 // Interrupt 6 priority mask
#define NVIC_PRI1_INT5_M 0x0000FF00 // Interrupt 5 priority mask
#define NVIC_PRI1_INT4_M 0x000000FF // Interrupt 4 priority mask
#define NVIC_PRI1_INT7_S 24
#define NVIC_PRI1_INT6_S 16
#define NVIC_PRI1_INT5_S 8
#define NVIC_PRI1_INT4_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI2 register.
//
//*****************************************************************************
#define NVIC_PRI2_INT11_M 0xFF000000 // Interrupt 11 priority mask
#define NVIC_PRI2_INT10_M 0x00FF0000 // Interrupt 10 priority mask
#define NVIC_PRI2_INT9_M 0x0000FF00 // Interrupt 9 priority mask
#define NVIC_PRI2_INT8_M 0x000000FF // Interrupt 8 priority mask
#define NVIC_PRI2_INT11_S 24
#define NVIC_PRI2_INT10_S 16
#define NVIC_PRI2_INT9_S 8
#define NVIC_PRI2_INT8_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI3 register.
//
//*****************************************************************************
#define NVIC_PRI3_INT15_M 0xFF000000 // Interrupt 15 priority mask
#define NVIC_PRI3_INT14_M 0x00FF0000 // Interrupt 14 priority mask
#define NVIC_PRI3_INT13_M 0x0000FF00 // Interrupt 13 priority mask
#define NVIC_PRI3_INT12_M 0x000000FF // Interrupt 12 priority mask
#define NVIC_PRI3_INT15_S 24
#define NVIC_PRI3_INT14_S 16
#define NVIC_PRI3_INT13_S 8
#define NVIC_PRI3_INT12_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI4 register.
//
//*****************************************************************************
#define NVIC_PRI4_INT19_M 0xFF000000 // Interrupt 19 priority mask
#define NVIC_PRI4_INT18_M 0x00FF0000 // Interrupt 18 priority mask
#define NVIC_PRI4_INT17_M 0x0000FF00 // Interrupt 17 priority mask
#define NVIC_PRI4_INT16_M 0x000000FF // Interrupt 16 priority mask
#define NVIC_PRI4_INT19_S 24
#define NVIC_PRI4_INT18_S 16
#define NVIC_PRI4_INT17_S 8
#define NVIC_PRI4_INT16_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI5 register.
//
//*****************************************************************************
#define NVIC_PRI5_INT23_M 0xFF000000 // Interrupt 23 priority mask
#define NVIC_PRI5_INT22_M 0x00FF0000 // Interrupt 22 priority mask
#define NVIC_PRI5_INT21_M 0x0000FF00 // Interrupt 21 priority mask
#define NVIC_PRI5_INT20_M 0x000000FF // Interrupt 20 priority mask
#define NVIC_PRI5_INT23_S 24
#define NVIC_PRI5_INT22_S 16
#define NVIC_PRI5_INT21_S 8
#define NVIC_PRI5_INT20_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI6 register.
//
//*****************************************************************************
#define NVIC_PRI6_INT27_M 0xFF000000 // Interrupt 27 priority mask
#define NVIC_PRI6_INT26_M 0x00FF0000 // Interrupt 26 priority mask
#define NVIC_PRI6_INT25_M 0x0000FF00 // Interrupt 25 priority mask
#define NVIC_PRI6_INT24_M 0x000000FF // Interrupt 24 priority mask
#define NVIC_PRI6_INT27_S 24
#define NVIC_PRI6_INT26_S 16
#define NVIC_PRI6_INT25_S 8
#define NVIC_PRI6_INT24_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI7 register.
//
//*****************************************************************************
#define NVIC_PRI7_INT31_M 0xFF000000 // Interrupt 31 priority mask
#define NVIC_PRI7_INT30_M 0x00FF0000 // Interrupt 30 priority mask
#define NVIC_PRI7_INT29_M 0x0000FF00 // Interrupt 29 priority mask
#define NVIC_PRI7_INT28_M 0x000000FF // Interrupt 28 priority mask
#define NVIC_PRI7_INT31_S 24
#define NVIC_PRI7_INT30_S 16
#define NVIC_PRI7_INT29_S 8
#define NVIC_PRI7_INT28_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI8 register.
//
//*****************************************************************************
#define NVIC_PRI8_INT35_M 0xFF000000 // Interrupt 35 priority mask
#define NVIC_PRI8_INT34_M 0x00FF0000 // Interrupt 34 priority mask
#define NVIC_PRI8_INT33_M 0x0000FF00 // Interrupt 33 priority mask
#define NVIC_PRI8_INT32_M 0x000000FF // Interrupt 32 priority mask
#define NVIC_PRI8_INT35_S 24
#define NVIC_PRI8_INT34_S 16
#define NVIC_PRI8_INT33_S 8
#define NVIC_PRI8_INT32_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI9 register.
//
//*****************************************************************************
#define NVIC_PRI9_INT39_M 0xFF000000 // Interrupt 39 priority mask
#define NVIC_PRI9_INT38_M 0x00FF0000 // Interrupt 38 priority mask
#define NVIC_PRI9_INT37_M 0x0000FF00 // Interrupt 37 priority mask
#define NVIC_PRI9_INT36_M 0x000000FF // Interrupt 36 priority mask
#define NVIC_PRI9_INT39_S 24
#define NVIC_PRI9_INT38_S 16
#define NVIC_PRI9_INT37_S 8
#define NVIC_PRI9_INT36_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI10 register.
//
//*****************************************************************************
#define NVIC_PRI10_INT43_M 0xFF000000 // Interrupt 43 priority mask
#define NVIC_PRI10_INT42_M 0x00FF0000 // Interrupt 42 priority mask
#define NVIC_PRI10_INT41_M 0x0000FF00 // Interrupt 41 priority mask
#define NVIC_PRI10_INT40_M 0x000000FF // Interrupt 40 priority mask
#define NVIC_PRI10_INT43_S 24
#define NVIC_PRI10_INT42_S 16
#define NVIC_PRI10_INT41_S 8
#define NVIC_PRI10_INT40_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_CPUID register.
//
//*****************************************************************************
#define NVIC_CPUID_IMP_M 0xFF000000 // Implementer
#define NVIC_CPUID_VAR_M 0x00F00000 // Variant
#define NVIC_CPUID_PARTNO_M 0x0000FFF0 // Processor part number
#define NVIC_CPUID_REV_M 0x0000000F // Revision
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_INT_CTRL register.
//
//*****************************************************************************
#define NVIC_INT_CTRL_NMI_SET 0x80000000 // Pend a NMI
#define NVIC_INT_CTRL_PEND_SV 0x10000000 // Pend a PendSV
#define NVIC_INT_CTRL_UNPEND_SV 0x08000000 // Unpend a PendSV
#define NVIC_INT_CTRL_PENDSTSET 0x04000000 // Set pending SysTick interrupt
#define NVIC_INT_CTRL_PENDSTCLR 0x02000000 // Clear pending SysTick interrupt
#define NVIC_INT_CTRL_ISR_PRE 0x00800000 // Debug interrupt handling
#define NVIC_INT_CTRL_ISR_PEND 0x00400000 // Debug interrupt pending
#define NVIC_INT_CTRL_VEC_PEN_M 0x003FF000 // Highest pending exception
#define NVIC_INT_CTRL_RET_BASE 0x00000800 // Return to base
#define NVIC_INT_CTRL_VEC_ACT_M 0x000003FF // Current active exception
#define NVIC_INT_CTRL_VEC_PEN_S 12
#define NVIC_INT_CTRL_VEC_ACT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_VTABLE register.
//
//*****************************************************************************
#define NVIC_VTABLE_BASE 0x20000000 // Vector table base
#define NVIC_VTABLE_OFFSET_M 0x1FFFFF00 // Vector table offset
#define NVIC_VTABLE_OFFSET_S 8
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_APINT register.
//
//*****************************************************************************
#define NVIC_APINT_VECTKEY_M 0xFFFF0000 // Vector key mask
#define NVIC_APINT_VECTKEY 0x05FA0000 // Vector key
#define NVIC_APINT_ENDIANESS 0x00008000 // Data endianess
#define NVIC_APINT_PRIGROUP_M 0x00000700 // Priority group
#define NVIC_APINT_PRIGROUP_7_1 0x00000000 // Priority group 7.1 split
#define NVIC_APINT_PRIGROUP_6_2 0x00000100 // Priority group 6.2 split
#define NVIC_APINT_PRIGROUP_5_3 0x00000200 // Priority group 5.3 split
#define NVIC_APINT_PRIGROUP_4_4 0x00000300 // Priority group 4.4 split
#define NVIC_APINT_PRIGROUP_3_5 0x00000400 // Priority group 3.5 split
#define NVIC_APINT_PRIGROUP_2_6 0x00000500 // Priority group 2.6 split
#define NVIC_APINT_PRIGROUP_1_7 0x00000600 // Priority group 1.7 split
#define NVIC_APINT_PRIGROUP_0_8 0x00000700 // Priority group 0.8 split
#define NVIC_APINT_SYSRESETREQ 0x00000004 // System reset request
#define NVIC_APINT_VECT_CLR_ACT 0x00000002 // Clear active NMI/fault info
#define NVIC_APINT_VECT_RESET 0x00000001 // System reset
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_SYS_CTRL register.
//
//*****************************************************************************
#define NVIC_SYS_CTRL_SEVONPEND 0x00000010 // Wakeup on pend
#define NVIC_SYS_CTRL_SLEEPDEEP 0x00000004 // Deep sleep enable
#define NVIC_SYS_CTRL_SLEEPEXIT 0x00000002 // Sleep on ISR exit
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_CFG_CTRL register.
//
//*****************************************************************************
#define NVIC_CFG_CTRL_BFHFNMIGN 0x00000100 // Ignore bus fault in NMI/fault
#define NVIC_CFG_CTRL_DIV0 0x00000010 // Trap on divide by 0
#define NVIC_CFG_CTRL_UNALIGNED 0x00000008 // Trap on unaligned access
#define NVIC_CFG_CTRL_DEEP_PEND 0x00000004 // Allow deep interrupt trigger
#define NVIC_CFG_CTRL_MAIN_PEND 0x00000002 // Allow main interrupt trigger
#define NVIC_CFG_CTRL_BASE_THR 0x00000001 // Thread state control
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_SYS_PRI1 register.
//
//*****************************************************************************
#define NVIC_SYS_PRI1_RES_M 0xFF000000 // Priority of reserved handler
#define NVIC_SYS_PRI1_USAGE_M 0x00FF0000 // Priority of usage fault handler
#define NVIC_SYS_PRI1_BUS_M 0x0000FF00 // Priority of bus fault handler
#define NVIC_SYS_PRI1_MEM_M 0x000000FF // Priority of mem manage handler
#define NVIC_SYS_PRI1_USAGE_S 16
#define NVIC_SYS_PRI1_BUS_S 8
#define NVIC_SYS_PRI1_MEM_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_SYS_PRI2 register.
//
//*****************************************************************************
#define NVIC_SYS_PRI2_SVC_M 0xFF000000 // Priority of SVCall handler
#define NVIC_SYS_PRI2_RES_M 0x00FFFFFF // Priority of reserved handlers
#define NVIC_SYS_PRI2_SVC_S 24
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_SYS_PRI3 register.
//
//*****************************************************************************
#define NVIC_SYS_PRI3_TICK_M 0xFF000000 // Priority of Sys Tick handler
#define NVIC_SYS_PRI3_PENDSV_M 0x00FF0000 // Priority of PendSV handler
#define NVIC_SYS_PRI3_RES_M 0x0000FF00 // Priority of reserved handler
#define NVIC_SYS_PRI3_DEBUG_M 0x000000FF // Priority of debug handler
#define NVIC_SYS_PRI3_TICK_S 24
#define NVIC_SYS_PRI3_PENDSV_S 16
#define NVIC_SYS_PRI3_DEBUG_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_SYS_HND_CTRL
// register.
//
//*****************************************************************************
#define NVIC_SYS_HND_CTRL_USAGE 0x00040000 // Usage fault enable
#define NVIC_SYS_HND_CTRL_BUS 0x00020000 // Bus fault enable
#define NVIC_SYS_HND_CTRL_MEM 0x00010000 // Mem manage fault enable
#define NVIC_SYS_HND_CTRL_SVC 0x00008000 // SVCall is pended
#define NVIC_SYS_HND_CTRL_BUSP 0x00004000 // Bus fault is pended
#define NVIC_SYS_HND_CTRL_TICK 0x00000800 // Sys tick is active
#define NVIC_SYS_HND_CTRL_PNDSV 0x00000400 // PendSV is active
#define NVIC_SYS_HND_CTRL_MON 0x00000100 // Monitor is active
#define NVIC_SYS_HND_CTRL_SVCA 0x00000080 // SVCall is active
#define NVIC_SYS_HND_CTRL_USGA 0x00000008 // Usage fault is active
#define NVIC_SYS_HND_CTRL_BUSA 0x00000002 // Bus fault is active
#define NVIC_SYS_HND_CTRL_MEMA 0x00000001 // Mem manage is active
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_FAULT_STAT
// register.
//
//*****************************************************************************
#define NVIC_FAULT_STAT_DIV0 0x02000000 // Divide by zero fault
#define NVIC_FAULT_STAT_UNALIGN 0x01000000 // Unaligned access fault
#define NVIC_FAULT_STAT_NOCP 0x00080000 // No coprocessor fault
#define NVIC_FAULT_STAT_INVPC 0x00040000 // Invalid PC fault
#define NVIC_FAULT_STAT_INVSTAT 0x00020000 // Invalid state fault
#define NVIC_FAULT_STAT_UNDEF 0x00010000 // Undefined instruction fault
#define NVIC_FAULT_STAT_BFARV 0x00008000 // BFAR is valid
#define NVIC_FAULT_STAT_BSTKE 0x00001000 // Stack bus fault
#define NVIC_FAULT_STAT_BUSTKE 0x00000800 // Unstack bus fault
#define NVIC_FAULT_STAT_IMPRE 0x00000400 // Imprecise data bus error
#define NVIC_FAULT_STAT_PRECISE 0x00000200 // Precise data bus error
#define NVIC_FAULT_STAT_IBUS 0x00000100 // Instruction bus fault
#define NVIC_FAULT_STAT_MMARV 0x00000080 // MMAR is valid
#define NVIC_FAULT_STAT_MSTKE 0x00000010 // Stack access violation
#define NVIC_FAULT_STAT_MUSTKE 0x00000008 // Unstack access violation
#define NVIC_FAULT_STAT_DERR 0x00000002 // Data access violation
#define NVIC_FAULT_STAT_IERR 0x00000001 // Instruction access violation
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_HFAULT_STAT
// register.
//
//*****************************************************************************
#define NVIC_HFAULT_STAT_DBG 0x80000000 // Debug event
#define NVIC_HFAULT_STAT_FORCED 0x40000000 // Cannot execute fault handler
#define NVIC_HFAULT_STAT_VECT 0x00000002 // Vector table read fault
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_DEBUG_STAT
// register.
//
//*****************************************************************************
#define NVIC_DEBUG_STAT_EXTRNL 0x00000010 // EDBGRQ asserted
#define NVIC_DEBUG_STAT_VCATCH 0x00000008 // Vector catch
#define NVIC_DEBUG_STAT_DWTTRAP 0x00000004 // DWT match
#define NVIC_DEBUG_STAT_BKPT 0x00000002 // Breakpoint instruction
#define NVIC_DEBUG_STAT_HALTED 0x00000001 // Halt request
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_MM_ADDR register.
//
//*****************************************************************************
#define NVIC_MM_ADDR_M 0xFFFFFFFF // Data fault address
#define NVIC_MM_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_FAULT_ADDR
// register.
//
//*****************************************************************************
#define NVIC_FAULT_ADDR_M 0xFFFFFFFF // Data bus fault address
#define NVIC_FAULT_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_MPU_TYPE register.
//
//*****************************************************************************
#define NVIC_MPU_TYPE_IREGION_M 0x00FF0000 // Number of I regions
#define NVIC_MPU_TYPE_DREGION_M 0x0000FF00 // Number of D regions
#define NVIC_MPU_TYPE_SEPARATE 0x00000001 // Separate or unified MPU
#define NVIC_MPU_TYPE_IREGION_S 16
#define NVIC_MPU_TYPE_DREGION_S 8
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_MPU_CTRL register.
//
//*****************************************************************************
#define NVIC_MPU_CTRL_PRIVDEFEN 0x00000004 // MPU default region in priv mode
#define NVIC_MPU_CTRL_HFNMIENA 0x00000002 // MPU enabled during faults
#define NVIC_MPU_CTRL_ENABLE 0x00000001 // MPU enable
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_MPU_NUMBER
// register.
//
//*****************************************************************************
#define NVIC_MPU_NUMBER_M 0x000000FF // MPU region to access
#define NVIC_MPU_NUMBER_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_MPU_BASE register.
//
//*****************************************************************************
#define NVIC_MPU_BASE_ADDR_M 0xFFFFFFE0 // Base address mask
#define NVIC_MPU_BASE_VALID 0x00000010 // Region number valid
#define NVIC_MPU_BASE_REGION_M 0x0000000F // Region number
#define NVIC_MPU_BASE_ADDR_S 8
#define NVIC_MPU_BASE_REGION_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_MPU_ATTR register.
//
//*****************************************************************************
#define NVIC_MPU_ATTR_M 0xFFFF0000 // Attributes
#define NVIC_MPU_ATTR_AP_NO_NO 0x00000000 // prv: no access, usr: no access
#define NVIC_MPU_ATTR_BUFFRABLE 0x00010000 // Bufferable
#define NVIC_MPU_ATTR_CACHEABLE 0x00020000 // Cacheable
#define NVIC_MPU_ATTR_SHAREABLE 0x00040000 // Shareable
#define NVIC_MPU_ATTR_TEX_M 0x00380000 // Type extension mask
#define NVIC_MPU_ATTR_AP_RW_NO 0x01000000 // prv: rw, usr: none
#define NVIC_MPU_ATTR_AP_RW_RO 0x02000000 // prv: rw, usr: read-only
#define NVIC_MPU_ATTR_AP_RW_RW 0x03000000 // prv: rw, usr: rw
#define NVIC_MPU_ATTR_AP_RO_NO 0x05000000 // prv: ro, usr: none
#define NVIC_MPU_ATTR_AP_RO_RO 0x06000000 // prv: ro, usr: ro
#define NVIC_MPU_ATTR_AP_M 0x07000000 // Access permissions mask
#define NVIC_MPU_ATTR_XN 0x10000000 // Execute disable
#define NVIC_MPU_ATTR_SRD_M 0x0000FF00 // Sub-region disable mask
#define NVIC_MPU_ATTR_SRD_0 0x00000100 // Sub-region 0 disable
#define NVIC_MPU_ATTR_SRD_1 0x00000200 // Sub-region 1 disable
#define NVIC_MPU_ATTR_SRD_2 0x00000400 // Sub-region 2 disable
#define NVIC_MPU_ATTR_SRD_3 0x00000800 // Sub-region 3 disable
#define NVIC_MPU_ATTR_SRD_4 0x00001000 // Sub-region 4 disable
#define NVIC_MPU_ATTR_SRD_5 0x00002000 // Sub-region 5 disable
#define NVIC_MPU_ATTR_SRD_6 0x00004000 // Sub-region 6 disable
#define NVIC_MPU_ATTR_SRD_7 0x00008000 // Sub-region 7 disable
#define NVIC_MPU_ATTR_SIZE_M 0x0000003E // Region size mask
#define NVIC_MPU_ATTR_SIZE_32B 0x00000008 // Region size 32 bytes
#define NVIC_MPU_ATTR_SIZE_64B 0x0000000A // Region size 64 bytes
#define NVIC_MPU_ATTR_SIZE_128B 0x0000000C // Region size 128 bytes
#define NVIC_MPU_ATTR_SIZE_256B 0x0000000E // Region size 256 bytes
#define NVIC_MPU_ATTR_SIZE_512B 0x00000010 // Region size 512 bytes
#define NVIC_MPU_ATTR_SIZE_1K 0x00000012 // Region size 1 Kbytes
#define NVIC_MPU_ATTR_SIZE_2K 0x00000014 // Region size 2 Kbytes
#define NVIC_MPU_ATTR_SIZE_4K 0x00000016 // Region size 4 Kbytes
#define NVIC_MPU_ATTR_SIZE_8K 0x00000018 // Region size 8 Kbytes
#define NVIC_MPU_ATTR_SIZE_16K 0x0000001A // Region size 16 Kbytes
#define NVIC_MPU_ATTR_SIZE_32K 0x0000001C // Region size 32 Kbytes
#define NVIC_MPU_ATTR_SIZE_64K 0x0000001E // Region size 64 Kbytes
#define NVIC_MPU_ATTR_SIZE_128K 0x00000020 // Region size 128 Kbytes
#define NVIC_MPU_ATTR_SIZE_256K 0x00000022 // Region size 256 Kbytes
#define NVIC_MPU_ATTR_SIZE_512K 0x00000024 // Region size 512 Kbytes
#define NVIC_MPU_ATTR_SIZE_1M 0x00000026 // Region size 1 Mbytes
#define NVIC_MPU_ATTR_SIZE_2M 0x00000028 // Region size 2 Mbytes
#define NVIC_MPU_ATTR_SIZE_4M 0x0000002A // Region size 4 Mbytes
#define NVIC_MPU_ATTR_SIZE_8M 0x0000002C // Region size 8 Mbytes
#define NVIC_MPU_ATTR_SIZE_16M 0x0000002E // Region size 16 Mbytes
#define NVIC_MPU_ATTR_SIZE_32M 0x00000030 // Region size 32 Mbytes
#define NVIC_MPU_ATTR_SIZE_64M 0x00000032 // Region size 64 Mbytes
#define NVIC_MPU_ATTR_SIZE_128M 0x00000034 // Region size 128 Mbytes
#define NVIC_MPU_ATTR_SIZE_256M 0x00000036 // Region size 256 Mbytes
#define NVIC_MPU_ATTR_SIZE_512M 0x00000038 // Region size 512 Mbytes
#define NVIC_MPU_ATTR_SIZE_1G 0x0000003A // Region size 1 Gbytes
#define NVIC_MPU_ATTR_SIZE_2G 0x0000003C // Region size 2 Gbytes
#define NVIC_MPU_ATTR_SIZE_4G 0x0000003E // Region size 4 Gbytes
#define NVIC_MPU_ATTR_ENABLE 0x00000001 // Region enable
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_DBG_CTRL register.
//
//*****************************************************************************
#define NVIC_DBG_CTRL_DBGKEY_M 0xFFFF0000 // Debug key mask
#define NVIC_DBG_CTRL_DBGKEY 0xA05F0000 // Debug key
#define NVIC_DBG_CTRL_S_RESET_ST \
0x02000000 // Core has reset since last read
#define NVIC_DBG_CTRL_S_RETIRE_ST \
0x01000000 // Core has executed insruction
// since last read
#define NVIC_DBG_CTRL_S_LOCKUP 0x00080000 // Core is locked up
#define NVIC_DBG_CTRL_S_SLEEP 0x00040000 // Core is sleeping
#define NVIC_DBG_CTRL_S_HALT 0x00020000 // Core status on halt
#define NVIC_DBG_CTRL_S_REGRDY 0x00010000 // Register read/write available
#define NVIC_DBG_CTRL_C_SNAPSTALL \
0x00000020 // Breaks a stalled load/store
#define NVIC_DBG_CTRL_C_MASKINT 0x00000008 // Mask interrupts when stepping
#define NVIC_DBG_CTRL_C_STEP 0x00000004 // Step the core
#define NVIC_DBG_CTRL_C_HALT 0x00000002 // Halt the core
#define NVIC_DBG_CTRL_C_DEBUGEN 0x00000001 // Enable debug
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_DBG_XFER register.
//
//*****************************************************************************
#define NVIC_DBG_XFER_REG_WNR 0x00010000 // Write or not read
#define NVIC_DBG_XFER_REG_SEL_M 0x0000001F // Register
#define NVIC_DBG_XFER_REG_R0 0x00000000 // Register R0
#define NVIC_DBG_XFER_REG_R1 0x00000001 // Register R1
#define NVIC_DBG_XFER_REG_R2 0x00000002 // Register R2
#define NVIC_DBG_XFER_REG_R3 0x00000003 // Register R3
#define NVIC_DBG_XFER_REG_R4 0x00000004 // Register R4
#define NVIC_DBG_XFER_REG_R5 0x00000005 // Register R5
#define NVIC_DBG_XFER_REG_R6 0x00000006 // Register R6
#define NVIC_DBG_XFER_REG_R7 0x00000007 // Register R7
#define NVIC_DBG_XFER_REG_R8 0x00000008 // Register R8
#define NVIC_DBG_XFER_REG_R9 0x00000009 // Register R9
#define NVIC_DBG_XFER_REG_R10 0x0000000A // Register R10
#define NVIC_DBG_XFER_REG_R11 0x0000000B // Register R11
#define NVIC_DBG_XFER_REG_R12 0x0000000C // Register R12
#define NVIC_DBG_XFER_REG_R13 0x0000000D // Register R13
#define NVIC_DBG_XFER_REG_R14 0x0000000E // Register R14
#define NVIC_DBG_XFER_REG_R15 0x0000000F // Register R15
#define NVIC_DBG_XFER_REG_FLAGS 0x00000010 // xPSR/Flags register
#define NVIC_DBG_XFER_REG_MSP 0x00000011 // Main SP
#define NVIC_DBG_XFER_REG_PSP 0x00000012 // Process SP
#define NVIC_DBG_XFER_REG_DSP 0x00000013 // Deep SP
#define NVIC_DBG_XFER_REG_CFBP 0x00000014 // Control/Fault/BasePri/PriMask
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_DBG_DATA register.
//
//*****************************************************************************
#define NVIC_DBG_DATA_M 0xFFFFFFFF // Data temporary cache
#define NVIC_DBG_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_DBG_INT register.
//
//*****************************************************************************
#define NVIC_DBG_INT_HARDERR 0x00000400 // Debug trap on hard fault
#define NVIC_DBG_INT_INTERR 0x00000200 // Debug trap on interrupt errors
#define NVIC_DBG_INT_BUSERR 0x00000100 // Debug trap on bus error
#define NVIC_DBG_INT_STATERR 0x00000080 // Debug trap on usage fault state
#define NVIC_DBG_INT_CHKERR 0x00000040 // Debug trap on usage fault check
#define NVIC_DBG_INT_NOCPERR 0x00000020 // Debug trap on coprocessor error
#define NVIC_DBG_INT_MMERR 0x00000010 // Debug trap on mem manage fault
#define NVIC_DBG_INT_RESET 0x00000008 // Core reset status
#define NVIC_DBG_INT_RSTPENDCLR 0x00000004 // Clear pending core reset
#define NVIC_DBG_INT_RSTPENDING 0x00000002 // Core reset is pending
#define NVIC_DBG_INT_RSTVCATCH 0x00000001 // Reset vector catch
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_SW_TRIG register.
//
//*****************************************************************************
#define NVIC_SW_TRIG_INTID_M 0x000003FF // Interrupt to trigger
#define NVIC_SW_TRIG_INTID_S 0
//*****************************************************************************
//
// The following definitions are deprecated.
//
//*****************************************************************************
#ifndef DEPRECATED
//*****************************************************************************
//
// Deprecated defines for the Watchdog
//
//*****************************************************************************
#define WATCHDOG_LOAD_R (*((volatile unsigned long *)0x40000000))
#define WATCHDOG_VALUE_R (*((volatile unsigned long *)0x40000004))
#define WATCHDOG_CTL_R (*((volatile unsigned long *)0x40000008))
#define WATCHDOG_ICR_R (*((volatile unsigned long *)0x4000000C))
#define WATCHDOG_RIS_R (*((volatile unsigned long *)0x40000010))
#define WATCHDOG_MIS_R (*((volatile unsigned long *)0x40000014))
#define WATCHDOG_TEST_R (*((volatile unsigned long *)0x40000418))
#define WATCHDOG_LOCK_R (*((volatile unsigned long *)0x40000C00))
//*****************************************************************************
//
// Deprecated defines for the bit fields in the I2C_O_SICR register.
//
//*****************************************************************************
#define I2C_SICR_IC 0x00000001 // Clear Interrupt
//*****************************************************************************
//
// Deprecated defines for the bit fields in the I2C_O_SMIS register.
//
//*****************************************************************************
#define I2C_SMIS_MIS 0x00000001 // Masked Interrupt Status
//*****************************************************************************
//
// Deprecated defines for the bit fields in the I2C_O_SRIS register.
//
//*****************************************************************************
#define I2C_SRIS_RIS 0x00000001 // Raw Interrupt Status
//*****************************************************************************
//
// Deprecated defines for the bit fields in the I2C_O_SIMR register.
//
//*****************************************************************************
#define I2C_SIMR_IM 0x00000001 // Interrupt Mask
//*****************************************************************************
//
// Deprecated defines for the bit fields in the the interpretation of the data
// in the SSFIFOx when the ADC TMLB is enabled. register.
//
//*****************************************************************************
#define ADC_TMLB_CNT_M 0x000003C0 // Continuous Sample Counter
#define ADC_TMLB_CONT 0x00000020 // Continuation Sample Indicator
#define ADC_TMLB_DIFF 0x00000010 // Differential Sample Indicator
#define ADC_TMLB_TS 0x00000008 // Temp Sensor Sample Indicator
#define ADC_TMLB_MUX_M 0x00000007 // Analog Input Indicator
#define ADC_TMLB_CNT_S 6 // Sample counter shift
#define ADC_TMLB_MUX_S 0 // Input channel number shift
//*****************************************************************************
//
// Deprecated defines for the ADC register offsets.
//
//*****************************************************************************
#define ADC_ACTSS_R (*((volatile unsigned long *)0x40038000))
#define ADC_RIS_R (*((volatile unsigned long *)0x40038004))
#define ADC_IM_R (*((volatile unsigned long *)0x40038008))
#define ADC_ISC_R (*((volatile unsigned long *)0x4003800C))
#define ADC_OSTAT_R (*((volatile unsigned long *)0x40038010))
#define ADC_EMUX_R (*((volatile unsigned long *)0x40038014))
#define ADC_USTAT_R (*((volatile unsigned long *)0x40038018))
#define ADC_SSPRI_R (*((volatile unsigned long *)0x40038020))
#define ADC_PSSI_R (*((volatile unsigned long *)0x40038028))
#define ADC_SAC_R (*((volatile unsigned long *)0x40038030))
#define ADC_SSMUX0_R (*((volatile unsigned long *)0x40038040))
#define ADC_SSCTL0_R (*((volatile unsigned long *)0x40038044))
#define ADC_SSFIFO0_R (*((volatile unsigned long *)0x40038048))
#define ADC_SSFSTAT0_R (*((volatile unsigned long *)0x4003804C))
#define ADC_SSMUX1_R (*((volatile unsigned long *)0x40038060))
#define ADC_SSCTL1_R (*((volatile unsigned long *)0x40038064))
#define ADC_SSFIFO1_R (*((volatile unsigned long *)0x40038068))
#define ADC_SSFSTAT1_R (*((volatile unsigned long *)0x4003806C))
#define ADC_SSMUX2_R (*((volatile unsigned long *)0x40038080))
#define ADC_SSCTL2_R (*((volatile unsigned long *)0x40038084))
#define ADC_SSFIFO2_R (*((volatile unsigned long *)0x40038088))
#define ADC_SSFSTAT2_R (*((volatile unsigned long *)0x4003808C))
#define ADC_SSMUX3_R (*((volatile unsigned long *)0x400380A0))
#define ADC_SSCTL3_R (*((volatile unsigned long *)0x400380A4))
#define ADC_SSFIFO3_R (*((volatile unsigned long *)0x400380A8))
#define ADC_SSFSTAT3_R (*((volatile unsigned long *)0x400380AC))
#define ADC_TMLB_R (*((volatile unsigned long *)0x40038100))
//*****************************************************************************
//
// Deprecated defines for the bit fields in the FLASH_FMC register.
//
//*****************************************************************************
#define FLASH_FMC_WRKEY_M 0xFFFF0000 // Flash Memory Write Key
#define FLASH_FMC_WRKEY_S 16
//*****************************************************************************
//
// Deprecated defines for the bit fields in the SYSCTL_DID1 register.
//
//*****************************************************************************
#define SYSCTL_DID1_PKG_28SOIC 0x00000000 // SOIC package
#define SYSCTL_DID1_PKG_48QFP 0x00000008 // QFP package
//*****************************************************************************
//
// Deprecated defines for the NVIC register addresses.
//
//*****************************************************************************
#define NVIC_MPU_R (*((volatile unsigned long *)0xE000ED9C))
#endif
#endif // __LM3S8962_H__
View Git Blame Copy Permalink