721 lines
52 KiB
C
721 lines
52 KiB
C
/*!
|
|
\file gd32vf103_rcu.h
|
|
\brief definitions for the RCU
|
|
|
|
\version 2019-6-5, V1.0.0, firmware for GD32VF103
|
|
*/
|
|
|
|
/*
|
|
Copyright (c) 2019, GigaDevice Semiconductor Inc.
|
|
|
|
Redistribution and use in source and binary forms, with or without modification,
|
|
are permitted provided that the following conditions are met:
|
|
|
|
1. Redistributions of source code must retain the above copyright notice, this
|
|
list of conditions and the following disclaimer.
|
|
2. Redistributions in binary form must reproduce the above copyright notice,
|
|
this list of conditions and the following disclaimer in the documentation
|
|
and/or other materials provided with the distribution.
|
|
3. Neither the name of the copyright holder nor the names of its contributors
|
|
may be used to endorse or promote products derived from this software without
|
|
specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
|
|
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
|
|
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
|
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
|
|
OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#ifndef GD32VF103_RCU_H
|
|
#define GD32VF103_RCU_H
|
|
|
|
#include "gd32vf103.h"
|
|
|
|
/* RCU definitions */
|
|
#define RCU RCU_BASE
|
|
|
|
/* registers definitions */
|
|
|
|
#define RCU_CTL REG32(RCU + 0x00U) /*!< control register */
|
|
#define RCU_CFG0 REG32(RCU + 0x04U) /*!< clock configuration register 0 */
|
|
#define RCU_INT REG32(RCU + 0x08U) /*!< clock interrupt register */
|
|
#define RCU_APB2RST REG32(RCU + 0x0CU) /*!< APB2 reset register */
|
|
#define RCU_APB1RST REG32(RCU + 0x10U) /*!< APB1 reset register */
|
|
#define RCU_AHBEN REG32(RCU + 0x14U) /*!< AHB1 enable register */
|
|
#define RCU_APB2EN REG32(RCU + 0x18U) /*!< APB2 enable register */
|
|
#define RCU_APB1EN REG32(RCU + 0x1CU) /*!< APB1 enable register */
|
|
#define RCU_BDCTL REG32(RCU + 0x20U) /*!< backup domain control register */
|
|
#define RCU_RSTSCK REG32(RCU + 0x24U) /*!< reset source / clock register */
|
|
#define RCU_AHBRST REG32(RCU + 0x28U) /*!< AHB reset register */
|
|
#define RCU_CFG1 REG32(RCU + 0x2CU) /*!< clock configuration register 1 */
|
|
#define RCU_DSV REG32(RCU + 0x34U) /*!< deep-sleep mode voltage register */
|
|
|
|
|
|
/* bits definitions */
|
|
/* RCU_CTL */
|
|
#define RCU_CTL_IRC8MEN BIT(0) /*!< internal high speed oscillator enable */
|
|
#define RCU_CTL_IRC8MSTB BIT(1) /*!< IRC8M high speed internal oscillator stabilization flag */
|
|
#define RCU_CTL_IRC8MADJ BITS(3,7) /*!< high speed internal oscillator clock trim adjust value */
|
|
#define RCU_CTL_IRC8MCALIB BITS(8,15) /*!< high speed internal oscillator calibration value register */
|
|
#define RCU_CTL_HXTALEN BIT(16) /*!< external high speed oscillator enable */
|
|
#define RCU_CTL_HXTALSTB BIT(17) /*!< external crystal oscillator clock stabilization flag */
|
|
#define RCU_CTL_HXTALBPS BIT(18) /*!< external crystal oscillator clock bypass mode enable */
|
|
#define RCU_CTL_CKMEN BIT(19) /*!< HXTAL clock monitor enable */
|
|
#define RCU_CTL_PLLEN BIT(24) /*!< PLL enable */
|
|
#define RCU_CTL_PLLSTB BIT(25) /*!< PLL clock stabilization flag */
|
|
#define RCU_CTL_PLL1EN BIT(26) /*!< PLL1 enable */
|
|
#define RCU_CTL_PLL1STB BIT(27) /*!< PLL1 clock stabilization flag */
|
|
#define RCU_CTL_PLL2EN BIT(28) /*!< PLL2 enable */
|
|
#define RCU_CTL_PLL2STB BIT(29) /*!< PLL2 clock stabilization flag */
|
|
|
|
|
|
#define RCU_CFG0_SCS BITS(0,1) /*!< system clock switch */
|
|
#define RCU_CFG0_SCSS BITS(2,3) /*!< system clock switch status */
|
|
#define RCU_CFG0_AHBPSC BITS(4,7) /*!< AHB prescaler selection */
|
|
#define RCU_CFG0_APB1PSC BITS(8,10) /*!< APB1 prescaler selection */
|
|
#define RCU_CFG0_APB2PSC BITS(11,13) /*!< APB2 prescaler selection */
|
|
#define RCU_CFG0_ADCPSC BITS(14,15) /*!< ADC prescaler selection */
|
|
#define RCU_CFG0_PLLSEL BIT(16) /*!< PLL clock source selection */
|
|
#define RCU_CFG0_PREDV0_LSB BIT(17) /*!< the LSB of PREDV0 division factor */
|
|
#define RCU_CFG0_PLLMF BITS(18,21) /*!< PLL clock multiplication factor */
|
|
#define RCU_CFG0_USBFSPSC BITS(22,23) /*!< USBFS clock prescaler selection */
|
|
#define RCU_CFG0_CKOUT0SEL BITS(24,27) /*!< CKOUT0 clock source selection */
|
|
#define RCU_CFG0_ADCPSC_2 BIT(28) /*!< bit 2 of ADCPSC */
|
|
#define RCU_CFG0_PLLMF_4 BIT(29) /*!< bit 4 of PLLMF */
|
|
|
|
/* RCU_INT */
|
|
#define RCU_INT_IRC40KSTBIF BIT(0) /*!< IRC40K stabilization interrupt flag */
|
|
#define RCU_INT_LXTALSTBIF BIT(1) /*!< LXTAL stabilization interrupt flag */
|
|
#define RCU_INT_IRC8MSTBIF BIT(2) /*!< IRC8M stabilization interrupt flag */
|
|
#define RCU_INT_HXTALSTBIF BIT(3) /*!< HXTAL stabilization interrupt flag */
|
|
#define RCU_INT_PLLSTBIF BIT(4) /*!< PLL stabilization interrupt flag */
|
|
#define RCU_INT_PLL1STBIF BIT(5) /*!< PLL1 stabilization interrupt flag */
|
|
#define RCU_INT_PLL2STBIF BIT(6) /*!< PLL2 stabilization interrupt flag */
|
|
#define RCU_INT_CKMIF BIT(7) /*!< HXTAL clock stuck interrupt flag */
|
|
#define RCU_INT_IRC40KSTBIE BIT(8) /*!< IRC40K stabilization interrupt enable */
|
|
#define RCU_INT_LXTALSTBIE BIT(9) /*!< LXTAL stabilization interrupt enable */
|
|
#define RCU_INT_IRC8MSTBIE BIT(10) /*!< IRC8M stabilization interrupt enable */
|
|
#define RCU_INT_HXTALSTBIE BIT(11) /*!< HXTAL stabilization interrupt enable */
|
|
#define RCU_INT_PLLSTBIE BIT(12) /*!< PLL stabilization interrupt enable */
|
|
#define RCU_INT_PLL1STBIE BIT(13) /*!< PLL1 stabilization interrupt enable */
|
|
#define RCU_INT_PLL2STBIE BIT(14) /*!< PLL2 stabilization interrupt enable */
|
|
#define RCU_INT_IRC40KSTBIC BIT(16) /*!< IRC40K stabilization interrupt clear */
|
|
#define RCU_INT_LXTALSTBIC BIT(17) /*!< LXTAL stabilization interrupt clear */
|
|
#define RCU_INT_IRC8MSTBIC BIT(18) /*!< IRC8M stabilization interrupt clear */
|
|
#define RCU_INT_HXTALSTBIC BIT(19) /*!< HXTAL stabilization interrupt clear */
|
|
#define RCU_INT_PLLSTBIC BIT(20) /*!< PLL stabilization interrupt clear */
|
|
#define RCU_INT_PLL1STBIC BIT(21) /*!< PLL1 stabilization interrupt clear */
|
|
#define RCU_INT_PLL2STBIC BIT(22) /*!< PLL2 stabilization interrupt clear */
|
|
#define RCU_INT_CKMIC BIT(23) /*!< HXTAL clock stuck interrupt clear */
|
|
|
|
/* RCU_APB2RST */
|
|
#define RCU_APB2RST_AFRST BIT(0) /*!< alternate function I/O reset */
|
|
#define RCU_APB2RST_PARST BIT(2) /*!< GPIO port A reset */
|
|
#define RCU_APB2RST_PBRST BIT(3) /*!< GPIO port B reset */
|
|
#define RCU_APB2RST_PCRST BIT(4) /*!< GPIO port C reset */
|
|
#define RCU_APB2RST_PDRST BIT(5) /*!< GPIO port D reset */
|
|
#define RCU_APB2RST_PERST BIT(6) /*!< GPIO port E reset */
|
|
#define RCU_APB2RST_ADC0RST BIT(9) /*!< ADC0 reset */
|
|
#define RCU_APB2RST_ADC1RST BIT(10) /*!< ADC1 reset */
|
|
#define RCU_APB2RST_TIMER0RST BIT(11) /*!< TIMER0 reset */
|
|
#define RCU_APB2RST_SPI0RST BIT(12) /*!< SPI0 reset */
|
|
#define RCU_APB2RST_USART0RST BIT(14) /*!< USART0 reset */
|
|
|
|
/* RCU_APB1RST */
|
|
#define RCU_APB1RST_TIMER1RST BIT(0) /*!< TIMER1 reset */
|
|
#define RCU_APB1RST_TIMER2RST BIT(1) /*!< TIMER2 reset */
|
|
#define RCU_APB1RST_TIMER3RST BIT(2) /*!< TIMER3 reset */
|
|
#define RCU_APB1RST_TIMER4RST BIT(3) /*!< TIMER4 reset */
|
|
#define RCU_APB1RST_TIMER5RST BIT(4) /*!< TIMER5 reset */
|
|
#define RCU_APB1RST_TIMER6RST BIT(5) /*!< TIMER6 reset */
|
|
|
|
#define RCU_APB1RST_WWDGTRST BIT(11) /*!< WWDGT reset */
|
|
#define RCU_APB1RST_SPI1RST BIT(14) /*!< SPI1 reset */
|
|
#define RCU_APB1RST_SPI2RST BIT(15) /*!< SPI2 reset */
|
|
#define RCU_APB1RST_USART1RST BIT(17) /*!< USART1 reset */
|
|
#define RCU_APB1RST_USART2RST BIT(18) /*!< USART2 reset */
|
|
#define RCU_APB1RST_UART3RST BIT(19) /*!< UART3 reset */
|
|
#define RCU_APB1RST_UART4RST BIT(20) /*!< UART4 reset */
|
|
#define RCU_APB1RST_I2C0RST BIT(21) /*!< I2C0 reset */
|
|
#define RCU_APB1RST_I2C1RST BIT(22) /*!< I2C1 reset */
|
|
#define RCU_APB1RST_CAN0RST BIT(25) /*!< CAN0 reset */
|
|
#define RCU_APB1RST_CAN1RST BIT(26) /*!< CAN1 reset */
|
|
#define RCU_APB1RST_BKPIRST BIT(27) /*!< backup interface reset */
|
|
#define RCU_APB1RST_PMURST BIT(28) /*!< PMU reset */
|
|
#define RCU_APB1RST_DACRST BIT(29) /*!< DAC reset */
|
|
|
|
/* RCU_AHBEN */
|
|
#define RCU_AHBEN_DMA0EN BIT(0) /*!< DMA0 clock enable */
|
|
#define RCU_AHBEN_DMA1EN BIT(1) /*!< DMA1 clock enable */
|
|
#define RCU_AHBEN_SRAMSPEN BIT(2) /*!< SRAM clock enable when sleep mode */
|
|
#define RCU_AHBEN_FMCSPEN BIT(4) /*!< FMC clock enable when sleep mode */
|
|
#define RCU_AHBEN_CRCEN BIT(6) /*!< CRC clock enable */
|
|
#define RCU_AHBEN_EXMCEN BIT(8) /*!< EXMC clock enable */
|
|
#define RCU_AHBEN_USBFSEN BIT(12) /*!< USBFS clock enable */
|
|
|
|
/* RCU_APB2EN */
|
|
#define RCU_APB2EN_AFEN BIT(0) /*!< alternate function IO clock enable */
|
|
#define RCU_APB2EN_PAEN BIT(2) /*!< GPIO port A clock enable */
|
|
#define RCU_APB2EN_PBEN BIT(3) /*!< GPIO port B clock enable */
|
|
#define RCU_APB2EN_PCEN BIT(4) /*!< GPIO port C clock enable */
|
|
#define RCU_APB2EN_PDEN BIT(5) /*!< GPIO port D clock enable */
|
|
#define RCU_APB2EN_PEEN BIT(6) /*!< GPIO port E clock enable */
|
|
#define RCU_APB2EN_ADC0EN BIT(9) /*!< ADC0 clock enable */
|
|
#define RCU_APB2EN_ADC1EN BIT(10) /*!< ADC1 clock enable */
|
|
#define RCU_APB2EN_TIMER0EN BIT(11) /*!< TIMER0 clock enable */
|
|
#define RCU_APB2EN_SPI0EN BIT(12) /*!< SPI0 clock enable */
|
|
#define RCU_APB2EN_USART0EN BIT(14) /*!< USART0 clock enable */
|
|
|
|
/* RCU_APB1EN */
|
|
#define RCU_APB1EN_TIMER1EN BIT(0) /*!< TIMER1 clock enable */
|
|
#define RCU_APB1EN_TIMER2EN BIT(1) /*!< TIMER2 clock enable */
|
|
#define RCU_APB1EN_TIMER3EN BIT(2) /*!< TIMER3 clock enable */
|
|
#define RCU_APB1EN_TIMER4EN BIT(3) /*!< TIMER4 clock enable */
|
|
#define RCU_APB1EN_TIMER5EN BIT(4) /*!< TIMER5 clock enable */
|
|
#define RCU_APB1EN_TIMER6EN BIT(5) /*!< TIMER6 clock enable */
|
|
#define RCU_APB1EN_WWDGTEN BIT(11) /*!< WWDGT clock enable */
|
|
#define RCU_APB1EN_SPI1EN BIT(14) /*!< SPI1 clock enable */
|
|
#define RCU_APB1EN_SPI2EN BIT(15) /*!< SPI2 clock enable */
|
|
#define RCU_APB1EN_USART1EN BIT(17) /*!< USART1 clock enable */
|
|
#define RCU_APB1EN_USART2EN BIT(18) /*!< USART2 clock enable */
|
|
#define RCU_APB1EN_UART3EN BIT(19) /*!< UART3 clock enable */
|
|
#define RCU_APB1EN_UART4EN BIT(20) /*!< UART4 clock enable */
|
|
#define RCU_APB1EN_I2C0EN BIT(21) /*!< I2C0 clock enable */
|
|
#define RCU_APB1EN_I2C1EN BIT(22) /*!< I2C1 clock enable */
|
|
#define RCU_APB1EN_CAN0EN BIT(25) /*!< CAN0 clock enable */
|
|
#define RCU_APB1EN_CAN1EN BIT(26) /*!< CAN1 clock enable */
|
|
#define RCU_APB1EN_BKPIEN BIT(27) /*!< backup interface clock enable */
|
|
#define RCU_APB1EN_PMUEN BIT(28) /*!< PMU clock enable */
|
|
#define RCU_APB1EN_DACEN BIT(29) /*!< DAC clock enable */
|
|
|
|
/* RCU_BDCTL */
|
|
#define RCU_BDCTL_LXTALEN BIT(0) /*!< LXTAL enable */
|
|
#define RCU_BDCTL_LXTALSTB BIT(1) /*!< low speed crystal oscillator stabilization flag */
|
|
#define RCU_BDCTL_LXTALBPS BIT(2) /*!< LXTAL bypass mode enable */
|
|
#define RCU_BDCTL_RTCSRC BITS(8,9) /*!< RTC clock entry selection */
|
|
#define RCU_BDCTL_RTCEN BIT(15) /*!< RTC clock enable */
|
|
#define RCU_BDCTL_BKPRST BIT(16) /*!< backup domain reset */
|
|
|
|
/* RCU_RSTSCK */
|
|
#define RCU_RSTSCK_IRC40KEN BIT(0) /*!< IRC40K enable */
|
|
#define RCU_RSTSCK_IRC40KSTB BIT(1) /*!< IRC40K stabilization flag */
|
|
#define RCU_RSTSCK_RSTFC BIT(24) /*!< reset flag clear */
|
|
#define RCU_RSTSCK_EPRSTF BIT(26) /*!< external pin reset flag */
|
|
#define RCU_RSTSCK_PORRSTF BIT(27) /*!< power reset flag */
|
|
#define RCU_RSTSCK_SWRSTF BIT(28) /*!< software reset flag */
|
|
#define RCU_RSTSCK_FWDGTRSTF BIT(29) /*!< free watchdog timer reset flag */
|
|
#define RCU_RSTSCK_WWDGTRSTF BIT(30) /*!< window watchdog timer reset flag */
|
|
#define RCU_RSTSCK_LPRSTF BIT(31) /*!< low-power reset flag */
|
|
|
|
/* RCU_AHBRST */
|
|
#define RCU_AHBRST_USBFSRST BIT(12) /*!< USBFS reset */
|
|
|
|
/* RCU_CFG1 */
|
|
#define RCU_CFG1_PREDV0 BITS(0,3) /*!< PREDV0 division factor */
|
|
#define RCU_CFG1_PREDV1 BITS(4,7) /*!< PREDV1 division factor */
|
|
#define RCU_CFG1_PLL1MF BITS(8,11) /*!< PLL1 clock multiplication factor */
|
|
#define RCU_CFG1_PLL2MF BITS(12,15) /*!< PLL2 clock multiplication factor */
|
|
#define RCU_CFG1_PREDV0SEL BIT(16) /*!< PREDV0 input clock source selection */
|
|
#define RCU_CFG1_I2S1SEL BIT(17) /*!< I2S1 clock source selection */
|
|
#define RCU_CFG1_I2S2SEL BIT(18) /*!< I2S2 clock source selection */
|
|
|
|
/* RCU_DSV */
|
|
#define RCU_DSV_DSLPVS BITS(0,1) /*!< deep-sleep mode voltage select */
|
|
|
|
/* constants definitions */
|
|
/* define the peripheral clock enable bit position and its register index offset */
|
|
#define RCU_REGIDX_BIT(regidx, bitpos) (((uint32_t)(regidx) << 6) | (uint32_t)(bitpos))
|
|
#define RCU_REG_VAL(periph) (REG32(RCU + ((uint32_t)(periph) >> 6)))
|
|
#define RCU_BIT_POS(val) ((uint32_t)(val) & 0x1FU)
|
|
|
|
/* register offset */
|
|
/* peripherals enable */
|
|
#define AHBEN_REG_OFFSET 0x14U /*!< AHB enable register offset */
|
|
#define APB1EN_REG_OFFSET 0x1CU /*!< APB1 enable register offset */
|
|
#define APB2EN_REG_OFFSET 0x18U /*!< APB2 enable register offset */
|
|
|
|
/* peripherals reset */
|
|
#define AHBRST_REG_OFFSET 0x28U /*!< AHB reset register offset */
|
|
#define APB1RST_REG_OFFSET 0x10U /*!< APB1 reset register offset */
|
|
#define APB2RST_REG_OFFSET 0x0CU /*!< APB2 reset register offset */
|
|
#define RSTSCK_REG_OFFSET 0x24U /*!< reset source/clock register offset */
|
|
|
|
/* clock control */
|
|
#define CTL_REG_OFFSET 0x00U /*!< control register offset */
|
|
#define BDCTL_REG_OFFSET 0x20U /*!< backup domain control register offset */
|
|
|
|
/* clock stabilization and stuck interrupt */
|
|
#define INT_REG_OFFSET 0x08U /*!< clock interrupt register offset */
|
|
|
|
/* configuration register */
|
|
#define CFG0_REG_OFFSET 0x04U /*!< clock configuration register 0 offset */
|
|
#define CFG1_REG_OFFSET 0x2CU /*!< clock configuration register 1 offset */
|
|
|
|
/* peripheral clock enable */
|
|
typedef enum {
|
|
/* AHB peripherals */
|
|
RCU_DMA0 = RCU_REGIDX_BIT(AHBEN_REG_OFFSET, 0U), /*!< DMA0 clock */
|
|
RCU_DMA1 = RCU_REGIDX_BIT(AHBEN_REG_OFFSET, 1U), /*!< DMA1 clock */
|
|
RCU_CRC = RCU_REGIDX_BIT(AHBEN_REG_OFFSET, 6U), /*!< CRC clock */
|
|
RCU_EXMC = RCU_REGIDX_BIT(AHBEN_REG_OFFSET, 8U), /*!< EXMC clock */
|
|
RCU_USBFS = RCU_REGIDX_BIT(AHBEN_REG_OFFSET, 12U), /*!< USBFS clock */
|
|
/* APB1 peripherals */
|
|
RCU_TIMER1 = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 0U), /*!< TIMER1 clock */
|
|
RCU_TIMER2 = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 1U), /*!< TIMER2 clock */
|
|
RCU_TIMER3 = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 2U), /*!< TIMER3 clock */
|
|
RCU_TIMER4 = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 3U), /*!< TIMER4 clock */
|
|
RCU_TIMER5 = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 4U), /*!< TIMER5 clock */
|
|
RCU_TIMER6 = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 5U), /*!< TIMER6 clock */
|
|
RCU_WWDGT = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 11U), /*!< WWDGT clock */
|
|
RCU_SPI1 = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 14U), /*!< SPI1 clock */
|
|
RCU_SPI2 = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 15U), /*!< SPI2 clock */
|
|
RCU_USART1 = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 17U), /*!< USART1 clock */
|
|
RCU_USART2 = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 18U), /*!< USART2 clock */
|
|
RCU_UART3 = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 19U), /*!< UART3 clock */
|
|
RCU_UART4 = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 20U), /*!< UART4 clock */
|
|
RCU_I2C0 = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 21U), /*!< I2C0 clock */
|
|
RCU_I2C1 = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 22U), /*!< I2C1 clock */
|
|
RCU_CAN0 = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 25U), /*!< CAN0 clock */
|
|
RCU_CAN1 = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 26U), /*!< CAN1 clock */
|
|
RCU_BKPI = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 27U), /*!< BKPI clock */
|
|
RCU_PMU = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 28U), /*!< PMU clock */
|
|
RCU_DAC = RCU_REGIDX_BIT(APB1EN_REG_OFFSET, 29U), /*!< DAC clock */
|
|
RCU_RTC = RCU_REGIDX_BIT(BDCTL_REG_OFFSET, 15U), /*!< RTC clock */
|
|
/* APB2 peripherals */
|
|
RCU_AF = RCU_REGIDX_BIT(APB2EN_REG_OFFSET, 0U), /*!< alternate function clock */
|
|
RCU_GPIOA = RCU_REGIDX_BIT(APB2EN_REG_OFFSET, 2U), /*!< GPIOA clock */
|
|
RCU_GPIOB = RCU_REGIDX_BIT(APB2EN_REG_OFFSET, 3U), /*!< GPIOB clock */
|
|
RCU_GPIOC = RCU_REGIDX_BIT(APB2EN_REG_OFFSET, 4U), /*!< GPIOC clock */
|
|
RCU_GPIOD = RCU_REGIDX_BIT(APB2EN_REG_OFFSET, 5U), /*!< GPIOD clock */
|
|
RCU_GPIOE = RCU_REGIDX_BIT(APB2EN_REG_OFFSET, 6U), /*!< GPIOE clock */
|
|
RCU_ADC0 = RCU_REGIDX_BIT(APB2EN_REG_OFFSET, 9U), /*!< ADC0 clock */
|
|
RCU_ADC1 = RCU_REGIDX_BIT(APB2EN_REG_OFFSET, 10U), /*!< ADC1 clock */
|
|
RCU_TIMER0 = RCU_REGIDX_BIT(APB2EN_REG_OFFSET, 11U), /*!< TIMER0 clock */
|
|
RCU_SPI0 = RCU_REGIDX_BIT(APB2EN_REG_OFFSET, 12U), /*!< SPI0 clock */
|
|
RCU_USART0 = RCU_REGIDX_BIT(APB2EN_REG_OFFSET, 14U), /*!< USART0 clock */
|
|
} rcu_periph_enum;
|
|
|
|
/* peripheral clock enable when sleep mode*/
|
|
typedef enum {
|
|
/* AHB peripherals */
|
|
RCU_SRAM_SLP = RCU_REGIDX_BIT(AHBEN_REG_OFFSET, 2U), /*!< SRAM clock */
|
|
RCU_FMC_SLP = RCU_REGIDX_BIT(AHBEN_REG_OFFSET, 4U), /*!< FMC clock */
|
|
} rcu_periph_sleep_enum;
|
|
|
|
/* peripherals reset */
|
|
typedef enum {
|
|
/* AHB peripherals */
|
|
RCU_USBFSRST = RCU_REGIDX_BIT(AHBRST_REG_OFFSET, 12U), /*!< USBFS clock reset */
|
|
/* APB1 peripherals */
|
|
RCU_TIMER1RST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 0U), /*!< TIMER1 clock reset */
|
|
RCU_TIMER2RST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 1U), /*!< TIMER2 clock reset */
|
|
RCU_TIMER3RST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 2U), /*!< TIMER3 clock reset */
|
|
RCU_TIMER4RST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 3U), /*!< TIMER4 clock reset */
|
|
RCU_TIMER5RST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 4U), /*!< TIMER5 clock reset */
|
|
RCU_TIMER6RST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 5U), /*!< TIMER6 clock reset */
|
|
RCU_WWDGTRST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 11U), /*!< WWDGT clock reset */
|
|
RCU_SPI1RST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 14U), /*!< SPI1 clock reset */
|
|
RCU_SPI2RST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 15U), /*!< SPI2 clock reset */
|
|
RCU_USART1RST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 17U), /*!< USART1 clock reset */
|
|
RCU_USART2RST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 18U), /*!< USART2 clock reset */
|
|
RCU_UART3RST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 19U), /*!< UART3 clock reset */
|
|
RCU_UART4RST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 20U), /*!< UART4 clock reset */
|
|
RCU_I2C0RST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 21U), /*!< I2C0 clock reset */
|
|
RCU_I2C1RST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 22U), /*!< I2C1 clock reset */
|
|
RCU_CAN0RST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 25U), /*!< CAN0 clock reset */
|
|
RCU_CAN1RST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 26U), /*!< CAN1 clock reset */
|
|
RCU_BKPIRST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 27U), /*!< BKPI clock reset */
|
|
RCU_PMURST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 28U), /*!< PMU clock reset */
|
|
RCU_DACRST = RCU_REGIDX_BIT(APB1RST_REG_OFFSET, 29U), /*!< DAC clock reset */
|
|
/* APB2 peripherals */
|
|
RCU_AFRST = RCU_REGIDX_BIT(APB2RST_REG_OFFSET, 0U), /*!< alternate function clock reset */
|
|
RCU_GPIOARST = RCU_REGIDX_BIT(APB2RST_REG_OFFSET, 2U), /*!< GPIOA clock reset */
|
|
RCU_GPIOBRST = RCU_REGIDX_BIT(APB2RST_REG_OFFSET, 3U), /*!< GPIOB clock reset */
|
|
RCU_GPIOCRST = RCU_REGIDX_BIT(APB2RST_REG_OFFSET, 4U), /*!< GPIOC clock reset */
|
|
RCU_GPIODRST = RCU_REGIDX_BIT(APB2RST_REG_OFFSET, 5U), /*!< GPIOD clock reset */
|
|
RCU_GPIOERST = RCU_REGIDX_BIT(APB2RST_REG_OFFSET, 6U), /*!< GPIOE clock reset */
|
|
RCU_ADC0RST = RCU_REGIDX_BIT(APB2RST_REG_OFFSET, 9U), /*!< ADC0 clock reset */
|
|
RCU_ADC1RST = RCU_REGIDX_BIT(APB2RST_REG_OFFSET, 10U), /*!< ADC1 clock reset */
|
|
RCU_TIMER0RST = RCU_REGIDX_BIT(APB2RST_REG_OFFSET, 11U), /*!< TIMER0 clock reset */
|
|
RCU_SPI0RST = RCU_REGIDX_BIT(APB2RST_REG_OFFSET, 12U), /*!< SPI0 clock reset */
|
|
RCU_USART0RST = RCU_REGIDX_BIT(APB2RST_REG_OFFSET, 14U), /*!< USART0 clock reset */
|
|
} rcu_periph_reset_enum;
|
|
|
|
/* clock stabilization and peripheral reset flags */
|
|
typedef enum {
|
|
/* clock stabilization flags */
|
|
RCU_FLAG_IRC8MSTB = RCU_REGIDX_BIT(CTL_REG_OFFSET, 1U), /*!< IRC8M stabilization flags */
|
|
RCU_FLAG_HXTALSTB = RCU_REGIDX_BIT(CTL_REG_OFFSET, 17U), /*!< HXTAL stabilization flags */
|
|
RCU_FLAG_PLLSTB = RCU_REGIDX_BIT(CTL_REG_OFFSET, 25U), /*!< PLL stabilization flags */
|
|
RCU_FLAG_PLL1STB = RCU_REGIDX_BIT(CTL_REG_OFFSET, 27U), /*!< PLL1 stabilization flags */
|
|
RCU_FLAG_PLL2STB = RCU_REGIDX_BIT(CTL_REG_OFFSET, 29U), /*!< PLL2 stabilization flags */
|
|
RCU_FLAG_LXTALSTB = RCU_REGIDX_BIT(BDCTL_REG_OFFSET, 1U), /*!< LXTAL stabilization flags */
|
|
RCU_FLAG_IRC40KSTB = RCU_REGIDX_BIT(RSTSCK_REG_OFFSET, 1U), /*!< IRC40K stabilization flags */
|
|
/* reset source flags */
|
|
RCU_FLAG_EPRST = RCU_REGIDX_BIT(RSTSCK_REG_OFFSET, 26U), /*!< external PIN reset flags */
|
|
RCU_FLAG_PORRST = RCU_REGIDX_BIT(RSTSCK_REG_OFFSET, 27U), /*!< power reset flags */
|
|
RCU_FLAG_SWRST = RCU_REGIDX_BIT(RSTSCK_REG_OFFSET, 28U), /*!< software reset flags */
|
|
RCU_FLAG_FWDGTRST = RCU_REGIDX_BIT(RSTSCK_REG_OFFSET, 29U), /*!< FWDGT reset flags */
|
|
RCU_FLAG_WWDGTRST = RCU_REGIDX_BIT(RSTSCK_REG_OFFSET, 30U), /*!< WWDGT reset flags */
|
|
RCU_FLAG_LPRST = RCU_REGIDX_BIT(RSTSCK_REG_OFFSET, 31U), /*!< low-power reset flags */
|
|
} rcu_flag_enum;
|
|
|
|
/* clock stabilization and ckm interrupt flags */
|
|
typedef enum {
|
|
RCU_INT_FLAG_IRC40KSTB = RCU_REGIDX_BIT(INT_REG_OFFSET, 0U), /*!< IRC40K stabilization interrupt flag */
|
|
RCU_INT_FLAG_LXTALSTB = RCU_REGIDX_BIT(INT_REG_OFFSET, 1U), /*!< LXTAL stabilization interrupt flag */
|
|
RCU_INT_FLAG_IRC8MSTB = RCU_REGIDX_BIT(INT_REG_OFFSET, 2U), /*!< IRC8M stabilization interrupt flag */
|
|
RCU_INT_FLAG_HXTALSTB = RCU_REGIDX_BIT(INT_REG_OFFSET, 3U), /*!< HXTAL stabilization interrupt flag */
|
|
RCU_INT_FLAG_PLLSTB = RCU_REGIDX_BIT(INT_REG_OFFSET, 4U), /*!< PLL stabilization interrupt flag */
|
|
RCU_INT_FLAG_PLL1STB = RCU_REGIDX_BIT(INT_REG_OFFSET, 5U), /*!< PLL1 stabilization interrupt flag */
|
|
RCU_INT_FLAG_PLL2STB = RCU_REGIDX_BIT(INT_REG_OFFSET, 6U), /*!< PLL2 stabilization interrupt flag */
|
|
RCU_INT_FLAG_CKM = RCU_REGIDX_BIT(INT_REG_OFFSET, 7U), /*!< HXTAL clock stuck interrupt flag */
|
|
} rcu_int_flag_enum;
|
|
|
|
/* clock stabilization and stuck interrupt flags clear */
|
|
typedef enum {
|
|
RCU_INT_FLAG_IRC40KSTB_CLR = RCU_REGIDX_BIT(INT_REG_OFFSET, 16U), /*!< IRC40K stabilization interrupt flags clear */
|
|
RCU_INT_FLAG_LXTALSTB_CLR = RCU_REGIDX_BIT(INT_REG_OFFSET, 17U), /*!< LXTAL stabilization interrupt flags clear */
|
|
RCU_INT_FLAG_IRC8MSTB_CLR = RCU_REGIDX_BIT(INT_REG_OFFSET, 18U), /*!< IRC8M stabilization interrupt flags clear */
|
|
RCU_INT_FLAG_HXTALSTB_CLR = RCU_REGIDX_BIT(INT_REG_OFFSET, 19U), /*!< HXTAL stabilization interrupt flags clear */
|
|
RCU_INT_FLAG_PLLSTB_CLR = RCU_REGIDX_BIT(INT_REG_OFFSET, 20U), /*!< PLL stabilization interrupt flags clear */
|
|
RCU_INT_FLAG_PLL1STB_CLR = RCU_REGIDX_BIT(INT_REG_OFFSET, 21U), /*!< PLL1 stabilization interrupt flags clear */
|
|
RCU_INT_FLAG_PLL2STB_CLR = RCU_REGIDX_BIT(INT_REG_OFFSET, 22U), /*!< PLL2 stabilization interrupt flags clear */
|
|
RCU_INT_FLAG_CKM_CLR = RCU_REGIDX_BIT(INT_REG_OFFSET, 23U), /*!< CKM interrupt flags clear */
|
|
} rcu_int_flag_clear_enum;
|
|
|
|
/* clock stabilization interrupt enable or disable */
|
|
typedef enum {
|
|
RCU_INT_IRC40KSTB = RCU_REGIDX_BIT(INT_REG_OFFSET, 8U), /*!< IRC40K stabilization interrupt */
|
|
RCU_INT_LXTALSTB = RCU_REGIDX_BIT(INT_REG_OFFSET, 9U), /*!< LXTAL stabilization interrupt */
|
|
RCU_INT_IRC8MSTB = RCU_REGIDX_BIT(INT_REG_OFFSET, 10U), /*!< IRC8M stabilization interrupt */
|
|
RCU_INT_HXTALSTB = RCU_REGIDX_BIT(INT_REG_OFFSET, 11U), /*!< HXTAL stabilization interrupt */
|
|
RCU_INT_PLLSTB = RCU_REGIDX_BIT(INT_REG_OFFSET, 12U), /*!< PLL stabilization interrupt */
|
|
RCU_INT_PLL1STB = RCU_REGIDX_BIT(INT_REG_OFFSET, 13U), /*!< PLL1 stabilization interrupt */
|
|
RCU_INT_PLL2STB = RCU_REGIDX_BIT(INT_REG_OFFSET, 14U), /*!< PLL2 stabilization interrupt */
|
|
} rcu_int_enum;
|
|
|
|
/* oscillator types */
|
|
typedef enum {
|
|
RCU_HXTAL = RCU_REGIDX_BIT(CTL_REG_OFFSET, 16U), /*!< HXTAL */
|
|
RCU_LXTAL = RCU_REGIDX_BIT(BDCTL_REG_OFFSET, 0U), /*!< LXTAL */
|
|
RCU_IRC8M = RCU_REGIDX_BIT(CTL_REG_OFFSET, 0U), /*!< IRC8M */
|
|
RCU_IRC40K = RCU_REGIDX_BIT(RSTSCK_REG_OFFSET, 0U), /*!< IRC40K */
|
|
RCU_PLL_CK = RCU_REGIDX_BIT(CTL_REG_OFFSET, 24U), /*!< PLL */
|
|
RCU_PLL1_CK = RCU_REGIDX_BIT(CTL_REG_OFFSET, 26U), /*!< PLL1 */
|
|
RCU_PLL2_CK = RCU_REGIDX_BIT(CTL_REG_OFFSET, 28U), /*!< PLL2 */
|
|
} rcu_osci_type_enum;
|
|
|
|
/* rcu clock frequency */
|
|
typedef enum {
|
|
CK_SYS = 0, /*!< system clock */
|
|
CK_AHB, /*!< AHB clock */
|
|
CK_APB1, /*!< APB1 clock */
|
|
CK_APB2, /*!< APB2 clock */
|
|
} rcu_clock_freq_enum;
|
|
|
|
/* RCU_CFG0 register bit define */
|
|
/* system clock source select */
|
|
#define CFG0_SCS(regval) (BITS(0,1) & ((uint32_t)(regval) << 0))
|
|
#define RCU_CKSYSSRC_IRC8M CFG0_SCS(0) /*!< system clock source select IRC8M */
|
|
#define RCU_CKSYSSRC_HXTAL CFG0_SCS(1) /*!< system clock source select HXTAL */
|
|
#define RCU_CKSYSSRC_PLL CFG0_SCS(2) /*!< system clock source select PLL */
|
|
|
|
/* system clock source select status */
|
|
#define CFG0_SCSS(regval) (BITS(2,3) & ((uint32_t)(regval) << 2))
|
|
#define RCU_SCSS_IRC8M CFG0_SCSS(0) /*!< system clock source select IRC8M */
|
|
#define RCU_SCSS_HXTAL CFG0_SCSS(1) /*!< system clock source select HXTAL */
|
|
#define RCU_SCSS_PLL CFG0_SCSS(2) /*!< system clock source select PLLP */
|
|
|
|
/* AHB prescaler selection */
|
|
#define CFG0_AHBPSC(regval) (BITS(4,7) & ((uint32_t)(regval) << 4))
|
|
#define RCU_AHB_CKSYS_DIV1 CFG0_AHBPSC(0) /*!< AHB prescaler select CK_SYS */
|
|
#define RCU_AHB_CKSYS_DIV2 CFG0_AHBPSC(8) /*!< AHB prescaler select CK_SYS/2 */
|
|
#define RCU_AHB_CKSYS_DIV4 CFG0_AHBPSC(9) /*!< AHB prescaler select CK_SYS/4 */
|
|
#define RCU_AHB_CKSYS_DIV8 CFG0_AHBPSC(10) /*!< AHB prescaler select CK_SYS/8 */
|
|
#define RCU_AHB_CKSYS_DIV16 CFG0_AHBPSC(11) /*!< AHB prescaler select CK_SYS/16 */
|
|
#define RCU_AHB_CKSYS_DIV64 CFG0_AHBPSC(12) /*!< AHB prescaler select CK_SYS/64 */
|
|
#define RCU_AHB_CKSYS_DIV128 CFG0_AHBPSC(13) /*!< AHB prescaler select CK_SYS/128 */
|
|
#define RCU_AHB_CKSYS_DIV256 CFG0_AHBPSC(14) /*!< AHB prescaler select CK_SYS/256 */
|
|
#define RCU_AHB_CKSYS_DIV512 CFG0_AHBPSC(15) /*!< AHB prescaler select CK_SYS/512 */
|
|
|
|
/* APB1 prescaler selection */
|
|
#define CFG0_APB1PSC(regval) (BITS(8,10) & ((uint32_t)(regval) << 8))
|
|
#define RCU_APB1_CKAHB_DIV1 CFG0_APB1PSC(0) /*!< APB1 prescaler select CK_AHB */
|
|
#define RCU_APB1_CKAHB_DIV2 CFG0_APB1PSC(4) /*!< APB1 prescaler select CK_AHB/2 */
|
|
#define RCU_APB1_CKAHB_DIV4 CFG0_APB1PSC(5) /*!< APB1 prescaler select CK_AHB/4 */
|
|
#define RCU_APB1_CKAHB_DIV8 CFG0_APB1PSC(6) /*!< APB1 prescaler select CK_AHB/8 */
|
|
#define RCU_APB1_CKAHB_DIV16 CFG0_APB1PSC(7) /*!< APB1 prescaler select CK_AHB/16 */
|
|
|
|
/* APB2 prescaler selection */
|
|
#define CFG0_APB2PSC(regval) (BITS(11,13) & ((uint32_t)(regval) << 11))
|
|
#define RCU_APB2_CKAHB_DIV1 CFG0_APB2PSC(0) /*!< APB2 prescaler select CK_AHB */
|
|
#define RCU_APB2_CKAHB_DIV2 CFG0_APB2PSC(4) /*!< APB2 prescaler select CK_AHB/2 */
|
|
#define RCU_APB2_CKAHB_DIV4 CFG0_APB2PSC(5) /*!< APB2 prescaler select CK_AHB/4 */
|
|
#define RCU_APB2_CKAHB_DIV8 CFG0_APB2PSC(6) /*!< APB2 prescaler select CK_AHB/8 */
|
|
#define RCU_APB2_CKAHB_DIV16 CFG0_APB2PSC(7) /*!< APB2 prescaler select CK_AHB/16 */
|
|
|
|
/* ADC prescaler select */
|
|
#define RCU_CKADC_CKAPB2_DIV2 ((uint32_t)0x00000000U) /*!< ADC prescaler select CK_APB2/2 */
|
|
#define RCU_CKADC_CKAPB2_DIV4 ((uint32_t)0x00000001U) /*!< ADC prescaler select CK_APB2/4 */
|
|
#define RCU_CKADC_CKAPB2_DIV6 ((uint32_t)0x00000002U) /*!< ADC prescaler select CK_APB2/6 */
|
|
#define RCU_CKADC_CKAPB2_DIV8 ((uint32_t)0x00000003U) /*!< ADC prescaler select CK_APB2/8 */
|
|
#define RCU_CKADC_CKAPB2_DIV12 ((uint32_t)0x00000005U) /*!< ADC prescaler select CK_APB2/12 */
|
|
#define RCU_CKADC_CKAPB2_DIV16 ((uint32_t)0x00000007U) /*!< ADC prescaler select CK_APB2/16 */
|
|
|
|
/* PLL clock source selection */
|
|
#define RCU_PLLSRC_IRC8M_DIV2 ((uint32_t)0x00000000U) /*!< IRC8M/2 clock selected as source clock of PLL */
|
|
#define RCU_PLLSRC_HXTAL RCU_CFG0_PLLSEL /*!< HXTAL clock selected as source clock of PLL */
|
|
|
|
/* PLL clock multiplication factor */
|
|
#define PLLMF_4 RCU_CFG0_PLLMF_4 /* bit 4 of PLLMF */
|
|
|
|
#define CFG0_PLLMF(regval) (BITS(18,21) & ((uint32_t)(regval) << 18))
|
|
#define RCU_PLL_MUL2 CFG0_PLLMF(0) /*!< PLL source clock multiply by 2 */
|
|
#define RCU_PLL_MUL3 CFG0_PLLMF(1) /*!< PLL source clock multiply by 3 */
|
|
#define RCU_PLL_MUL4 CFG0_PLLMF(2) /*!< PLL source clock multiply by 4 */
|
|
#define RCU_PLL_MUL5 CFG0_PLLMF(3) /*!< PLL source clock multiply by 5 */
|
|
#define RCU_PLL_MUL6 CFG0_PLLMF(4) /*!< PLL source clock multiply by 6 */
|
|
#define RCU_PLL_MUL7 CFG0_PLLMF(5) /*!< PLL source clock multiply by 7 */
|
|
#define RCU_PLL_MUL8 CFG0_PLLMF(6) /*!< PLL source clock multiply by 8 */
|
|
#define RCU_PLL_MUL9 CFG0_PLLMF(7) /*!< PLL source clock multiply by 9 */
|
|
#define RCU_PLL_MUL10 CFG0_PLLMF(8) /*!< PLL source clock multiply by 10 */
|
|
#define RCU_PLL_MUL11 CFG0_PLLMF(9) /*!< PLL source clock multiply by 11 */
|
|
#define RCU_PLL_MUL12 CFG0_PLLMF(10) /*!< PLL source clock multiply by 12 */
|
|
#define RCU_PLL_MUL13 CFG0_PLLMF(11) /*!< PLL source clock multiply by 13 */
|
|
#define RCU_PLL_MUL14 CFG0_PLLMF(12) /*!< PLL source clock multiply by 14 */
|
|
#define RCU_PLL_MUL6_5 CFG0_PLLMF(13) /*!< PLL source clock multiply by 6.5 */
|
|
#define RCU_PLL_MUL16 CFG0_PLLMF(14) /*!< PLL source clock multiply by 16 */
|
|
#define RCU_PLL_MUL17 (PLLMF_4 | CFG0_PLLMF(0)) /*!< PLL source clock multiply by 17 */
|
|
#define RCU_PLL_MUL18 (PLLMF_4 | CFG0_PLLMF(1)) /*!< PLL source clock multiply by 18 */
|
|
#define RCU_PLL_MUL19 (PLLMF_4 | CFG0_PLLMF(2)) /*!< PLL source clock multiply by 19 */
|
|
#define RCU_PLL_MUL20 (PLLMF_4 | CFG0_PLLMF(3)) /*!< PLL source clock multiply by 20 */
|
|
#define RCU_PLL_MUL21 (PLLMF_4 | CFG0_PLLMF(4)) /*!< PLL source clock multiply by 21 */
|
|
#define RCU_PLL_MUL22 (PLLMF_4 | CFG0_PLLMF(5)) /*!< PLL source clock multiply by 22 */
|
|
#define RCU_PLL_MUL23 (PLLMF_4 | CFG0_PLLMF(6)) /*!< PLL source clock multiply by 23 */
|
|
#define RCU_PLL_MUL24 (PLLMF_4 | CFG0_PLLMF(7)) /*!< PLL source clock multiply by 24 */
|
|
#define RCU_PLL_MUL25 (PLLMF_4 | CFG0_PLLMF(8)) /*!< PLL source clock multiply by 25 */
|
|
#define RCU_PLL_MUL26 (PLLMF_4 | CFG0_PLLMF(9)) /*!< PLL source clock multiply by 26 */
|
|
#define RCU_PLL_MUL27 (PLLMF_4 | CFG0_PLLMF(10)) /*!< PLL source clock multiply by 27 */
|
|
#define RCU_PLL_MUL28 (PLLMF_4 | CFG0_PLLMF(11)) /*!< PLL source clock multiply by 28 */
|
|
#define RCU_PLL_MUL29 (PLLMF_4 | CFG0_PLLMF(12)) /*!< PLL source clock multiply by 29 */
|
|
#define RCU_PLL_MUL30 (PLLMF_4 | CFG0_PLLMF(13)) /*!< PLL source clock multiply by 30 */
|
|
#define RCU_PLL_MUL31 (PLLMF_4 | CFG0_PLLMF(14)) /*!< PLL source clock multiply by 31 */
|
|
#define RCU_PLL_MUL32 (PLLMF_4 | CFG0_PLLMF(15)) /*!< PLL source clock multiply by 32 */
|
|
|
|
/* USBFS prescaler select */
|
|
#define CFG0_USBPSC(regval) (BITS(22,23) & ((uint32_t)(regval) << 22))
|
|
#define RCU_CKUSB_CKPLL_DIV1_5 CFG0_USBPSC(0) /*!< USBFS prescaler select CK_PLL/1.5 */
|
|
#define RCU_CKUSB_CKPLL_DIV1 CFG0_USBPSC(1) /*!< USBFS prescaler select CK_PLL/1 */
|
|
#define RCU_CKUSB_CKPLL_DIV2_5 CFG0_USBPSC(2) /*!< USBFS prescaler select CK_PLL/2.5 */
|
|
#define RCU_CKUSB_CKPLL_DIV2 CFG0_USBPSC(3) /*!< USBFS prescaler select CK_PLL/2 */
|
|
|
|
/* CKOUT0 clock source selection */
|
|
#define CFG0_CKOUT0SEL(regval) (BITS(24,27) & ((uint32_t)(regval) << 24))
|
|
#define RCU_CKOUT0SRC_NONE CFG0_CKOUT0SEL(0) /*!< no clock selected */
|
|
#define RCU_CKOUT0SRC_CKSYS CFG0_CKOUT0SEL(4) /*!< system clock selected */
|
|
#define RCU_CKOUT0SRC_IRC8M CFG0_CKOUT0SEL(5) /*!< internal 8M RC oscillator clock selected */
|
|
#define RCU_CKOUT0SRC_HXTAL CFG0_CKOUT0SEL(6) /*!< high speed crystal oscillator clock (HXTAL) selected */
|
|
#define RCU_CKOUT0SRC_CKPLL_DIV2 CFG0_CKOUT0SEL(7) /*!< CK_PLL/2 clock selected */
|
|
#define RCU_CKOUT0SRC_CKPLL1 CFG0_CKOUT0SEL(8) /*!< CK_PLL1 clock selected */
|
|
#define RCU_CKOUT0SRC_CKPLL2_DIV2 CFG0_CKOUT0SEL(9) /*!< CK_PLL2/2 clock selected */
|
|
#define RCU_CKOUT0SRC_EXT1 CFG0_CKOUT0SEL(10) /*!< EXT1 selected */
|
|
#define RCU_CKOUT0SRC_CKPLL2 CFG0_CKOUT0SEL(11) /*!< CK_PLL2 clock selected */
|
|
|
|
/* RTC clock entry selection */
|
|
#define BDCTL_RTCSRC(regval) (BITS(8,9) & ((uint32_t)(regval) << 8))
|
|
#define RCU_RTCSRC_NONE BDCTL_RTCSRC(0) /*!< no clock selected */
|
|
#define RCU_RTCSRC_LXTAL BDCTL_RTCSRC(1) /*!< RTC source clock select LXTAL */
|
|
#define RCU_RTCSRC_IRC40K BDCTL_RTCSRC(2) /*!< RTC source clock select IRC40K */
|
|
#define RCU_RTCSRC_HXTAL_DIV_128 BDCTL_RTCSRC(3) /*!< RTC source clock select HXTAL/128 */
|
|
|
|
/* PREDV0 division factor */
|
|
#define CFG1_PREDV0(regval) (BITS(0,3) & ((uint32_t)(regval) << 0))
|
|
#define RCU_PREDV0_DIV1 CFG1_PREDV0(0) /*!< PREDV0 input source clock not divided */
|
|
#define RCU_PREDV0_DIV2 CFG1_PREDV0(1) /*!< PREDV0 input source clock divided by 2 */
|
|
#define RCU_PREDV0_DIV3 CFG1_PREDV0(2) /*!< PREDV0 input source clock divided by 3 */
|
|
#define RCU_PREDV0_DIV4 CFG1_PREDV0(3) /*!< PREDV0 input source clock divided by 4 */
|
|
#define RCU_PREDV0_DIV5 CFG1_PREDV0(4) /*!< PREDV0 input source clock divided by 5 */
|
|
#define RCU_PREDV0_DIV6 CFG1_PREDV0(5) /*!< PREDV0 input source clock divided by 6 */
|
|
#define RCU_PREDV0_DIV7 CFG1_PREDV0(6) /*!< PREDV0 input source clock divided by 7 */
|
|
#define RCU_PREDV0_DIV8 CFG1_PREDV0(7) /*!< PREDV0 input source clock divided by 8 */
|
|
#define RCU_PREDV0_DIV9 CFG1_PREDV0(8) /*!< PREDV0 input source clock divided by 9 */
|
|
#define RCU_PREDV0_DIV10 CFG1_PREDV0(9) /*!< PREDV0 input source clock divided by 10 */
|
|
#define RCU_PREDV0_DIV11 CFG1_PREDV0(10) /*!< PREDV0 input source clock divided by 11 */
|
|
#define RCU_PREDV0_DIV12 CFG1_PREDV0(11) /*!< PREDV0 input source clock divided by 12 */
|
|
#define RCU_PREDV0_DIV13 CFG1_PREDV0(12) /*!< PREDV0 input source clock divided by 13 */
|
|
#define RCU_PREDV0_DIV14 CFG1_PREDV0(13) /*!< PREDV0 input source clock divided by 14 */
|
|
#define RCU_PREDV0_DIV15 CFG1_PREDV0(14) /*!< PREDV0 input source clock divided by 15 */
|
|
#define RCU_PREDV0_DIV16 CFG1_PREDV0(15) /*!< PREDV0 input source clock divided by 16 */
|
|
|
|
/* PREDV1 division factor */
|
|
#define CFG1_PREDV1(regval) (BITS(4,7) & ((uint32_t)(regval) << 4))
|
|
#define RCU_PREDV1_DIV1 CFG1_PREDV1(0) /*!< PREDV1 input source clock not divided */
|
|
#define RCU_PREDV1_DIV2 CFG1_PREDV1(1) /*!< PREDV1 input source clock divided by 2 */
|
|
#define RCU_PREDV1_DIV3 CFG1_PREDV1(2) /*!< PREDV1 input source clock divided by 3 */
|
|
#define RCU_PREDV1_DIV4 CFG1_PREDV1(3) /*!< PREDV1 input source clock divided by 4 */
|
|
#define RCU_PREDV1_DIV5 CFG1_PREDV1(4) /*!< PREDV1 input source clock divided by 5 */
|
|
#define RCU_PREDV1_DIV6 CFG1_PREDV1(5) /*!< PREDV1 input source clock divided by 6 */
|
|
#define RCU_PREDV1_DIV7 CFG1_PREDV1(6) /*!< PREDV1 input source clock divided by 7 */
|
|
#define RCU_PREDV1_DIV8 CFG1_PREDV1(7) /*!< PREDV1 input source clock divided by 8 */
|
|
#define RCU_PREDV1_DIV9 CFG1_PREDV1(8) /*!< PREDV1 input source clock divided by 9 */
|
|
#define RCU_PREDV1_DIV10 CFG1_PREDV1(9) /*!< PREDV1 input source clock divided by 10 */
|
|
#define RCU_PREDV1_DIV11 CFG1_PREDV1(10) /*!< PREDV1 input source clock divided by 11 */
|
|
#define RCU_PREDV1_DIV12 CFG1_PREDV1(11) /*!< PREDV1 input source clock divided by 12 */
|
|
#define RCU_PREDV1_DIV13 CFG1_PREDV1(12) /*!< PREDV1 input source clock divided by 13 */
|
|
#define RCU_PREDV1_DIV14 CFG1_PREDV1(13) /*!< PREDV1 input source clock divided by 14 */
|
|
#define RCU_PREDV1_DIV15 CFG1_PREDV1(14) /*!< PREDV1 input source clock divided by 15 */
|
|
#define RCU_PREDV1_DIV16 CFG1_PREDV1(15) /*!< PREDV1 input source clock divided by 16 */
|
|
|
|
/* PLL1 clock multiplication factor */
|
|
#define CFG1_PLL1MF(regval) (BITS(8,11) & ((uint32_t)(regval) << 8))
|
|
#define RCU_PLL1_MUL8 CFG1_PLL1MF(6) /*!< PLL1 source clock multiply by 8 */
|
|
#define RCU_PLL1_MUL9 CFG1_PLL1MF(7) /*!< PLL1 source clock multiply by 9 */
|
|
#define RCU_PLL1_MUL10 CFG1_PLL1MF(8) /*!< PLL1 source clock multiply by 10 */
|
|
#define RCU_PLL1_MUL11 CFG1_PLL1MF(9) /*!< PLL1 source clock multiply by 11 */
|
|
#define RCU_PLL1_MUL12 CFG1_PLL1MF(10) /*!< PLL1 source clock multiply by 12 */
|
|
#define RCU_PLL1_MUL13 CFG1_PLL1MF(11) /*!< PLL1 source clock multiply by 13 */
|
|
#define RCU_PLL1_MUL14 CFG1_PLL1MF(12) /*!< PLL1 source clock multiply by 14 */
|
|
#define RCU_PLL1_MUL15 CFG1_PLL1MF(13) /*!< PLL1 source clock multiply by 15 */
|
|
#define RCU_PLL1_MUL16 CFG1_PLL1MF(14) /*!< PLL1 source clock multiply by 16 */
|
|
#define RCU_PLL1_MUL20 CFG1_PLL1MF(15) /*!< PLL1 source clock multiply by 20 */
|
|
|
|
/* PLL2 clock multiplication factor */
|
|
#define CFG1_PLL2MF(regval) (BITS(12,15) & ((uint32_t)(regval) << 12))
|
|
#define RCU_PLL2_MUL8 CFG1_PLL2MF(6) /*!< PLL2 source clock multiply by 8 */
|
|
#define RCU_PLL2_MUL9 CFG1_PLL2MF(7) /*!< PLL2 source clock multiply by 9 */
|
|
#define RCU_PLL2_MUL10 CFG1_PLL2MF(8) /*!< PLL2 source clock multiply by 10 */
|
|
#define RCU_PLL2_MUL11 CFG1_PLL2MF(9) /*!< PLL2 source clock multiply by 11 */
|
|
#define RCU_PLL2_MUL12 CFG1_PLL2MF(10) /*!< PLL2 source clock multiply by 12 */
|
|
#define RCU_PLL2_MUL13 CFG1_PLL2MF(11) /*!< PLL2 source clock multiply by 13 */
|
|
#define RCU_PLL2_MUL14 CFG1_PLL2MF(12) /*!< PLL2 source clock multiply by 14 */
|
|
#define RCU_PLL2_MUL15 CFG1_PLL2MF(13) /*!< PLL2 source clock multiply by 15 */
|
|
#define RCU_PLL2_MUL16 CFG1_PLL2MF(14) /*!< PLL2 source clock multiply by 16 */
|
|
#define RCU_PLL2_MUL20 CFG1_PLL2MF(15) /*!< PLL2 source clock multiply by 20 */
|
|
|
|
|
|
/* PREDV0 input clock source selection */
|
|
#define RCU_PREDV0SRC_HXTAL ((uint32_t)0x00000000U) /*!< HXTAL selected as PREDV0 input source clock */
|
|
#define RCU_PREDV0SRC_CKPLL1 RCU_CFG1_PREDV0SEL /*!< CK_PLL1 selected as PREDV0 input source clock */
|
|
|
|
/* I2S1 clock source selection */
|
|
#define RCU_I2S1SRC_CKSYS ((uint32_t)0x00000000U) /*!< system clock selected as I2S1 source clock */
|
|
#define RCU_I2S1SRC_CKPLL2_MUL2 RCU_CFG1_I2S1SEL /*!< (CK_PLL2 x 2) selected as I2S1 source clock */
|
|
|
|
/* I2S2 clock source selection */
|
|
#define RCU_I2S2SRC_CKSYS ((uint32_t)0x00000000U) /*!< system clock selected as I2S2 source clock */
|
|
#define RCU_I2S2SRC_CKPLL2_MUL2 RCU_CFG1_I2S2SEL /*!< (CK_PLL2 x 2) selected as I2S2 source clock */
|
|
|
|
|
|
/* deep-sleep mode voltage */
|
|
#define DSV_DSLPVS(regval) (BITS(0,1) & ((uint32_t)(regval) << 0))
|
|
#define RCU_DEEPSLEEP_V_1_2 DSV_DSLPVS(0) /*!< core voltage is 1.2V in deep-sleep mode */
|
|
#define RCU_DEEPSLEEP_V_1_1 DSV_DSLPVS(1) /*!< core voltage is 1.1V in deep-sleep mode */
|
|
#define RCU_DEEPSLEEP_V_1_0 DSV_DSLPVS(2) /*!< core voltage is 1.0V in deep-sleep mode */
|
|
#define RCU_DEEPSLEEP_V_0_9 DSV_DSLPVS(3) /*!< core voltage is 0.9V in deep-sleep mode */
|
|
|
|
/* function declarations */
|
|
/* initialization, peripheral clock enable/disable functions */
|
|
/* deinitialize the RCU */
|
|
void rcu_deinit(void);
|
|
/* enable the peripherals clock */
|
|
void rcu_periph_clock_enable(rcu_periph_enum periph);
|
|
/* disable the peripherals clock */
|
|
void rcu_periph_clock_disable(rcu_periph_enum periph);
|
|
/* enable the peripherals clock when sleep mode */
|
|
void rcu_periph_clock_sleep_enable(rcu_periph_sleep_enum periph);
|
|
/* disable the peripherals clock when sleep mode */
|
|
void rcu_periph_clock_sleep_disable(rcu_periph_sleep_enum periph);
|
|
/* reset the peripherals */
|
|
void rcu_periph_reset_enable(rcu_periph_reset_enum periph_reset);
|
|
/* disable reset the peripheral */
|
|
void rcu_periph_reset_disable(rcu_periph_reset_enum periph_reset);
|
|
/* reset the BKP domain */
|
|
void rcu_bkp_reset_enable(void);
|
|
/* disable the BKP domain reset */
|
|
void rcu_bkp_reset_disable(void);
|
|
|
|
/* clock configuration functions */
|
|
/* configure the system clock source */
|
|
void rcu_system_clock_source_config(uint32_t ck_sys);
|
|
/* get the system clock source */
|
|
uint32_t rcu_system_clock_source_get(void);
|
|
/* configure the AHB prescaler selection */
|
|
void rcu_ahb_clock_config(uint32_t ck_ahb);
|
|
/* configure the APB1 prescaler selection */
|
|
void rcu_apb1_clock_config(uint32_t ck_apb1);
|
|
/* configure the APB2 prescaler selection */
|
|
void rcu_apb2_clock_config(uint32_t ck_apb2);
|
|
/* configure the CK_OUT0 clock source and divider */
|
|
void rcu_ckout0_config(uint32_t ckout0_src);
|
|
/* configure the PLL clock source selection and PLL multiply factor */
|
|
void rcu_pll_config(uint32_t pll_src, uint32_t pll_mul);
|
|
|
|
/* configure the PREDV0 division factor and clock source */
|
|
void rcu_predv0_config(uint32_t predv0_source, uint32_t predv0_div);
|
|
/* configure the PREDV1 division factor */
|
|
void rcu_predv1_config(uint32_t predv1_div);
|
|
/* configure the PLL1 clock */
|
|
void rcu_pll1_config(uint32_t pll_mul);
|
|
/* configure the PLL2 clock */
|
|
void rcu_pll2_config(uint32_t pll_mul);
|
|
|
|
/* peripheral clock configuration functions */
|
|
/* configure the ADC division factor */
|
|
void rcu_adc_clock_config(uint32_t adc_psc);
|
|
/* configure the USBD/USBFS prescaler factor */
|
|
void rcu_usb_clock_config(uint32_t usb_psc);
|
|
/* configure the RTC clock source selection */
|
|
void rcu_rtc_clock_config(uint32_t rtc_clock_source);
|
|
|
|
/* configure the I2S1 clock source selection */
|
|
void rcu_i2s1_clock_config(uint32_t i2s_clock_source);
|
|
/* configure the I2S2 clock source selection */
|
|
void rcu_i2s2_clock_config(uint32_t i2s_clock_source);
|
|
|
|
/* interrupt & flag functions */
|
|
/* get the clock stabilization and periphral reset flags */
|
|
FlagStatus rcu_flag_get(rcu_flag_enum flag);
|
|
/* clear the reset flag */
|
|
void rcu_all_reset_flag_clear(void);
|
|
/* get the clock stabilization interrupt and ckm flags */
|
|
FlagStatus rcu_interrupt_flag_get(rcu_int_flag_enum int_flag);
|
|
/* clear the interrupt flags */
|
|
void rcu_interrupt_flag_clear(rcu_int_flag_clear_enum int_flag_clear);
|
|
/* enable the stabilization interrupt */
|
|
void rcu_interrupt_enable(rcu_int_enum stab_int);
|
|
/* disable the stabilization interrupt */
|
|
void rcu_interrupt_disable(rcu_int_enum stab_int);
|
|
|
|
/* oscillator configuration functions */
|
|
/* wait for oscillator stabilization flags is SET or oscillator startup is timeout */
|
|
ErrStatus rcu_osci_stab_wait(rcu_osci_type_enum osci);
|
|
/* turn on the oscillator */
|
|
void rcu_osci_on(rcu_osci_type_enum osci);
|
|
/* turn off the oscillator */
|
|
void rcu_osci_off(rcu_osci_type_enum osci);
|
|
/* enable the oscillator bypass mode, HXTALEN or LXTALEN must be reset before it */
|
|
void rcu_osci_bypass_mode_enable(rcu_osci_type_enum osci);
|
|
/* disable the oscillator bypass mode, HXTALEN or LXTALEN must be reset before it */
|
|
void rcu_osci_bypass_mode_disable(rcu_osci_type_enum osci);
|
|
/* enable the HXTAL clock monitor */
|
|
void rcu_hxtal_clock_monitor_enable(void);
|
|
/* disable the HXTAL clock monitor */
|
|
void rcu_hxtal_clock_monitor_disable(void);
|
|
|
|
/* set the IRC8M adjust value */
|
|
void rcu_irc8m_adjust_value_set(uint32_t irc8m_adjval);
|
|
/* set the deep sleep mode voltage */
|
|
void rcu_deepsleep_voltage_set(uint32_t dsvol);
|
|
|
|
/* get the system clock, bus and peripheral clock frequency */
|
|
uint32_t rcu_clock_freq_get(rcu_clock_freq_enum clock);
|
|
|
|
#endif /* GD32VF103_RCU_H */
|