rt-thread-official/bsp/frdm-k64f/device/MK64F12/fsl_uart_edma.h

191 lines
7.1 KiB
C

/*
* Copyright (c) 2015, Freescale Semiconductor, Inc.
* Copyright 2016-2017 NXP
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* o Redistributions of source code must retain the above copyright notice, this list
* of conditions and the following disclaimer.
*
* o Redistributions in binary form must reproduce the above copyright notice, this
* list of conditions and the following disclaimer in the documentation and/or
* other materials provided with the distribution.
*
* o Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _FSL_UART_EDMA_H_
#define _FSL_UART_EDMA_H_
#include "fsl_uart.h"
#include "fsl_dmamux.h"
#include "fsl_edma.h"
/*!
* @addtogroup uart_edma_driver
* @{
*/
/*******************************************************************************
* Definitions
******************************************************************************/
/* Forward declaration of the handle typedef. */
typedef struct _uart_edma_handle uart_edma_handle_t;
/*! @brief UART transfer callback function. */
typedef void (*uart_edma_transfer_callback_t)(UART_Type *base,
uart_edma_handle_t *handle,
status_t status,
void *userData);
/*!
* @brief UART eDMA handle
*/
struct _uart_edma_handle
{
uart_edma_transfer_callback_t callback; /*!< Callback function. */
void *userData; /*!< UART callback function parameter.*/
size_t rxDataSizeAll; /*!< Size of the data to receive. */
size_t txDataSizeAll; /*!< Size of the data to send out. */
edma_handle_t *txEdmaHandle; /*!< The eDMA TX channel used. */
edma_handle_t *rxEdmaHandle; /*!< The eDMA RX channel used. */
uint8_t nbytes; /*!< eDMA minor byte transfer count initially configured. */
volatile uint8_t txState; /*!< TX transfer state. */
volatile uint8_t rxState; /*!< RX transfer state */
};
/*******************************************************************************
* API
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif
/*!
* @name eDMA transactional
* @{
*/
/*!
* @brief Initializes the UART handle which is used in transactional functions.
* @param base UART peripheral base address.
* @param handle Pointer to the uart_edma_handle_t structure.
* @param callback UART callback, NULL means no callback.
* @param userData User callback function data.
* @param rxEdmaHandle User-requested DMA handle for RX DMA transfer.
* @param txEdmaHandle User-requested DMA handle for TX DMA transfer.
*/
void UART_TransferCreateHandleEDMA(UART_Type *base,
uart_edma_handle_t *handle,
uart_edma_transfer_callback_t callback,
void *userData,
edma_handle_t *txEdmaHandle,
edma_handle_t *rxEdmaHandle);
/*!
* @brief Sends data using eDMA.
*
* This function sends data using eDMA. This is a non-blocking function, which returns
* right away. When all data is sent, the send callback function is called.
*
* @param base UART peripheral base address.
* @param handle UART handle pointer.
* @param xfer UART eDMA transfer structure. See #uart_transfer_t.
* @retval kStatus_Success if succeeded; otherwise failed.
* @retval kStatus_UART_TxBusy Previous transfer ongoing.
* @retval kStatus_InvalidArgument Invalid argument.
*/
status_t UART_SendEDMA(UART_Type *base, uart_edma_handle_t *handle, uart_transfer_t *xfer);
/*!
* @brief Receives data using eDMA.
*
* This function receives data using eDMA. This is a non-blocking function, which returns
* right away. When all data is received, the receive callback function is called.
*
* @param base UART peripheral base address.
* @param handle Pointer to the uart_edma_handle_t structure.
* @param xfer UART eDMA transfer structure. See #uart_transfer_t.
* @retval kStatus_Success if succeeded; otherwise failed.
* @retval kStatus_UART_RxBusy Previous transfer ongoing.
* @retval kStatus_InvalidArgument Invalid argument.
*/
status_t UART_ReceiveEDMA(UART_Type *base, uart_edma_handle_t *handle, uart_transfer_t *xfer);
/*!
* @brief Aborts the sent data using eDMA.
*
* This function aborts sent data using eDMA.
*
* @param base UART peripheral base address.
* @param handle Pointer to the uart_edma_handle_t structure.
*/
void UART_TransferAbortSendEDMA(UART_Type *base, uart_edma_handle_t *handle);
/*!
* @brief Aborts the receive data using eDMA.
*
* This function aborts receive data using eDMA.
*
* @param base UART peripheral base address.
* @param handle Pointer to the uart_edma_handle_t structure.
*/
void UART_TransferAbortReceiveEDMA(UART_Type *base, uart_edma_handle_t *handle);
/*!
* @brief Gets the number of bytes that have been written to UART TX register.
*
* This function gets the number of bytes that have been written to UART TX
* register by DMA.
*
* @param base UART peripheral base address.
* @param handle UART handle pointer.
* @param count Send bytes count.
* @retval kStatus_NoTransferInProgress No send in progress.
* @retval kStatus_InvalidArgument Parameter is invalid.
* @retval kStatus_Success Get successfully through the parameter \p count;
*/
status_t UART_TransferGetSendCountEDMA(UART_Type *base, uart_edma_handle_t *handle, uint32_t *count);
/*!
* @brief Gets the number of received bytes.
*
* This function gets the number of received bytes.
*
* @param base UART peripheral base address.
* @param handle UART handle pointer.
* @param count Receive bytes count.
* @retval kStatus_NoTransferInProgress No receive in progress.
* @retval kStatus_InvalidArgument Parameter is invalid.
* @retval kStatus_Success Get successfully through the parameter \p count;
*/
status_t UART_TransferGetReceiveCountEDMA(UART_Type *base, uart_edma_handle_t *handle, uint32_t *count);
/*@}*/
#if defined(__cplusplus)
}
#endif
/*! @}*/
#endif /* _FSL_UART_EDMA_H_ */