287 lines
7.9 KiB
C
287 lines
7.9 KiB
C
/*
|
|
* Copyright (c) 2006-2018, RT-Thread Development Team
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2017-08-25 LongfeiMa the first version for stm32h7xx
|
|
*/
|
|
|
|
#include "stm32h7xx.h"
|
|
#include "drv_usart.h"
|
|
#include "board.h"
|
|
|
|
#include <rtdevice.h>
|
|
|
|
/* Definition for USART1 clock resources */
|
|
#define USART1_CLK_ENABLE() __USART1_CLK_ENABLE()
|
|
#define USART1_RX_GPIO_CLK_ENABLE() __GPIOB_CLK_ENABLE()
|
|
#define USART1_TX_GPIO_CLK_ENABLE() __GPIOA_CLK_ENABLE()
|
|
|
|
#define USART1_FORCE_RESET() __USART1_FORCE_RESET()
|
|
#define USART1_RELEASE_RESET() __USART1_RELEASE_RESET()
|
|
|
|
/* Definition for USARTx Pins */
|
|
#define USART1_TX_PIN GPIO_PIN_9
|
|
#define USART1_TX_GPIO_PORT GPIOA
|
|
#define USART1_TX_AF GPIO_AF7_USART1
|
|
#define USART1_RX_PIN GPIO_PIN_7
|
|
#define USART1_RX_GPIO_PORT GPIOB
|
|
#define USART1_RX_AF GPIO_AF7_USART1
|
|
|
|
/* STM32 uart driver */
|
|
struct stm32_uart
|
|
{
|
|
UART_HandleTypeDef UartHandle;
|
|
IRQn_Type irq;
|
|
};
|
|
|
|
static rt_err_t stm32_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
|
|
{
|
|
struct stm32_uart *uart;
|
|
|
|
RT_ASSERT(serial != RT_NULL);
|
|
RT_ASSERT(cfg != RT_NULL);
|
|
|
|
uart = (struct stm32_uart *)serial->parent.user_data;
|
|
|
|
uart->UartHandle.Init.BaudRate = cfg->baud_rate;
|
|
uart->UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
|
uart->UartHandle.Init.Mode = UART_MODE_TX_RX;
|
|
uart->UartHandle.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
|
|
|
|
switch (cfg->data_bits)
|
|
{
|
|
case DATA_BITS_7:
|
|
uart->UartHandle.Init.WordLength = UART_WORDLENGTH_7B;
|
|
break;
|
|
case DATA_BITS_8:
|
|
uart->UartHandle.Init.WordLength = UART_WORDLENGTH_8B;
|
|
break;
|
|
case DATA_BITS_9:
|
|
uart->UartHandle.Init.WordLength = UART_WORDLENGTH_9B;
|
|
break;
|
|
default:
|
|
uart->UartHandle.Init.WordLength = UART_WORDLENGTH_8B;
|
|
break;
|
|
}
|
|
switch (cfg->stop_bits)
|
|
{
|
|
case STOP_BITS_1:
|
|
uart->UartHandle.Init.StopBits = UART_STOPBITS_1;
|
|
break;
|
|
case STOP_BITS_2:
|
|
uart->UartHandle.Init.StopBits = UART_STOPBITS_2;
|
|
break;
|
|
default:
|
|
uart->UartHandle.Init.StopBits = UART_STOPBITS_1;
|
|
break;
|
|
}
|
|
switch (cfg->parity)
|
|
{
|
|
case PARITY_NONE:
|
|
uart->UartHandle.Init.Parity = UART_PARITY_NONE;
|
|
break;
|
|
case PARITY_ODD:
|
|
uart->UartHandle.Init.Parity = UART_PARITY_ODD;
|
|
break;
|
|
case PARITY_EVEN:
|
|
uart->UartHandle.Init.Parity = UART_PARITY_EVEN;
|
|
break;
|
|
default:
|
|
uart->UartHandle.Init.Parity = UART_PARITY_NONE;
|
|
break;
|
|
}
|
|
if (HAL_UART_DeInit(&uart->UartHandle) != HAL_OK)
|
|
{
|
|
return RT_ERROR;
|
|
}
|
|
if (HAL_UART_Init(&uart->UartHandle) != HAL_OK)
|
|
{
|
|
return RT_ERROR;
|
|
}
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
static rt_err_t stm32_control(struct rt_serial_device *serial, int cmd, void *arg)
|
|
{
|
|
struct stm32_uart *uart;
|
|
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct stm32_uart *)serial->parent.user_data;
|
|
|
|
switch (cmd)
|
|
{
|
|
case RT_DEVICE_CTRL_CLR_INT:
|
|
/* disable rx irq */
|
|
UART_DISABLE_IRQ(uart->irq);
|
|
/* disable interrupt */
|
|
__HAL_UART_DISABLE_IT(&uart->UartHandle, UART_IT_RXNE);
|
|
break;
|
|
case RT_DEVICE_CTRL_SET_INT:
|
|
/* enable rx irq */
|
|
UART_ENABLE_IRQ(uart->irq);
|
|
/* enable interrupt */
|
|
__HAL_UART_ENABLE_IT(&uart->UartHandle, UART_IT_RXNE);
|
|
break;
|
|
}
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
static int stm32_putc(struct rt_serial_device *serial, char c)
|
|
{
|
|
struct stm32_uart *uart;
|
|
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct stm32_uart *)serial->parent.user_data;
|
|
|
|
__HAL_UART_CLEAR_FLAG(&(uart->UartHandle), UART_FLAG_TC);
|
|
uart->UartHandle.Instance->TDR = c;
|
|
while (__HAL_UART_GET_FLAG(&(uart->UartHandle), UART_FLAG_TC) == RESET);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int stm32_getc(struct rt_serial_device *serial)
|
|
{
|
|
int ch;
|
|
struct stm32_uart *uart;
|
|
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct stm32_uart *)serial->parent.user_data;
|
|
|
|
ch = -1;
|
|
if (uart->UartHandle.Instance->ISR & UART_FLAG_RXNE)
|
|
{
|
|
ch = uart->UartHandle.Instance->RDR & 0xff;
|
|
}
|
|
|
|
return ch;
|
|
}
|
|
|
|
static const struct rt_uart_ops stm32_uart_ops =
|
|
{
|
|
stm32_configure,
|
|
stm32_control,
|
|
stm32_putc,
|
|
stm32_getc,
|
|
};
|
|
|
|
#if defined(RT_USING_UART1)
|
|
/* UART1 device driver structure */
|
|
|
|
static struct stm32_uart uart1;
|
|
struct rt_serial_device serial1;
|
|
|
|
void USART1_IRQHandler(void)
|
|
{
|
|
struct stm32_uart *uart;
|
|
|
|
uart = &uart1;
|
|
|
|
/* enter interrupt */
|
|
rt_interrupt_enter();
|
|
|
|
/* UART in mode Receiver ---------------------------------------------------*/
|
|
if ((__HAL_UART_GET_IT(&uart->UartHandle, UART_IT_RXNE) != RESET) && (__HAL_UART_GET_IT_SOURCE(&uart->UartHandle, UART_IT_RXNE) != RESET))
|
|
{
|
|
rt_hw_serial_isr(&serial1, RT_SERIAL_EVENT_RX_IND);
|
|
/* Clear RXNE interrupt flag */
|
|
__HAL_UART_SEND_REQ(&uart->UartHandle, UART_RXDATA_FLUSH_REQUEST);
|
|
}
|
|
/* leave interrupt */
|
|
rt_interrupt_leave();
|
|
}
|
|
#endif /* RT_USING_UART1 */
|
|
|
|
/**
|
|
* @brief UART MSP Initialization
|
|
* This function configures the hardware resources used in this example:
|
|
* - Peripheral's clock enable
|
|
* - Peripheral's GPIO Configuration
|
|
* - NVIC configuration for UART interrupt request enable
|
|
* @param huart: UART handle pointer
|
|
* @retval None
|
|
*/
|
|
void HAL_UART_MspInit(UART_HandleTypeDef *huart)
|
|
{
|
|
GPIO_InitTypeDef GPIO_InitStruct;
|
|
if (huart->Instance == USART1)
|
|
{
|
|
/* Enable GPIO TX/RX clock */
|
|
USART1_TX_GPIO_CLK_ENABLE();
|
|
USART1_RX_GPIO_CLK_ENABLE();
|
|
/* Enable USARTx clock */
|
|
USART1_CLK_ENABLE();
|
|
|
|
/* UART TX GPIO pin configuration */
|
|
GPIO_InitStruct.Pin = USART1_TX_PIN;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
GPIO_InitStruct.Alternate = USART1_TX_AF;
|
|
HAL_GPIO_Init(USART1_TX_GPIO_PORT, &GPIO_InitStruct);
|
|
|
|
/* UART RX GPIO pin configuration */
|
|
GPIO_InitStruct.Pin = USART1_RX_PIN;
|
|
GPIO_InitStruct.Alternate = USART1_RX_AF;
|
|
HAL_GPIO_Init(USART1_RX_GPIO_PORT, &GPIO_InitStruct);
|
|
|
|
/* NVIC for USART */
|
|
HAL_NVIC_SetPriority(USART1_IRQn, 0, 1);
|
|
HAL_NVIC_EnableIRQ(USART1_IRQn);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief UART MSP De-Initialization
|
|
* This function frees the hardware resources used in this example:
|
|
* - Disable the Peripheral's clock
|
|
* - Revert GPIO and NVIC configuration to their default state
|
|
* @param huart: UART handle pointer
|
|
* @retval None
|
|
*/
|
|
void HAL_UART_MspDeInit(UART_HandleTypeDef *huart)
|
|
{
|
|
if (huart->Instance == USART1)
|
|
{
|
|
/* Reset peripherals */
|
|
USART1_FORCE_RESET();
|
|
USART1_RELEASE_RESET();
|
|
|
|
/* Disable peripherals and GPIO Clocks */
|
|
/* Configure UART Tx as alternate function */
|
|
HAL_GPIO_DeInit(USART1_TX_GPIO_PORT, USART1_TX_PIN);
|
|
/* Configure UART Rx as alternate function */
|
|
HAL_GPIO_DeInit(USART1_RX_GPIO_PORT, USART1_RX_PIN);
|
|
|
|
/* Disable the NVIC for UART */
|
|
HAL_NVIC_DisableIRQ(USART1_IRQn);
|
|
}
|
|
}
|
|
|
|
int stm32_hw_usart_init(void)
|
|
{
|
|
struct stm32_uart *uart;
|
|
struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
|
|
|
|
#ifdef RT_USING_UART1
|
|
uart = &uart1;
|
|
uart->UartHandle.Instance = USART1;
|
|
|
|
serial1.ops = &stm32_uart_ops;
|
|
serial1.config = config;
|
|
|
|
/* register UART1 device */
|
|
rt_hw_serial_register(&serial1, "uart1",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
|
|
uart);
|
|
#endif /* RT_USING_UART1 */
|
|
|
|
return 0;
|
|
}
|
|
INIT_BOARD_EXPORT(stm32_hw_usart_init);
|