845 lines
28 KiB
C
845 lines
28 KiB
C
/*!
|
|
\file gd32e230_adc.c
|
|
\brief ADC driver
|
|
|
|
\version 2018-06-19, V1.0.0, firmware for GD32E230
|
|
*/
|
|
|
|
/*
|
|
Copyright (c) 2018, GigaDevice Semiconductor Inc.
|
|
|
|
All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or without modification,
|
|
are permitted provided that the following conditions are met:
|
|
|
|
1. Redistributions of source code must retain the above copyright notice, this
|
|
list of conditions and the following disclaimer.
|
|
2. Redistributions in binary form must reproduce the above copyright notice,
|
|
this list of conditions and the following disclaimer in the documentation
|
|
and/or other materials provided with the distribution.
|
|
3. Neither the name of the copyright holder nor the names of its contributors
|
|
may be used to endorse or promote products derived from this software without
|
|
specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
|
|
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
|
|
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
|
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
|
|
OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include "gd32e230_adc.h"
|
|
|
|
/*!
|
|
\brief reset ADC
|
|
\param[in] none
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void adc_deinit(void)
|
|
{
|
|
rcu_periph_reset_enable(RCU_ADCRST);
|
|
rcu_periph_reset_disable(RCU_ADCRST);
|
|
}
|
|
|
|
/*!
|
|
\brief enable ADC interface
|
|
\param[in] none
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void adc_enable(void)
|
|
{
|
|
if(RESET == (ADC_CTL1 & ADC_CTL1_ADCON)){
|
|
ADC_CTL1 |= (uint32_t)ADC_CTL1_ADCON;
|
|
}
|
|
}
|
|
|
|
/*!
|
|
\brief disable ADC interface
|
|
\param[in] none
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void adc_disable(void)
|
|
{
|
|
ADC_CTL1 &= ~((uint32_t)ADC_CTL1_ADCON);
|
|
}
|
|
|
|
/*!
|
|
\brief ADC calibration and reset calibration
|
|
\param[in] none
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void adc_calibration_enable(void)
|
|
{
|
|
/* reset the selected ADC calibration register */
|
|
ADC_CTL1 |= (uint32_t) ADC_CTL1_RSTCLB;
|
|
/* check the RSTCLB bit state */
|
|
while((ADC_CTL1 & ADC_CTL1_RSTCLB)){
|
|
}
|
|
|
|
/* enable ADC calibration process */
|
|
ADC_CTL1 |= ADC_CTL1_CLB;
|
|
/* check the CLB bit state */
|
|
while((ADC_CTL1 & ADC_CTL1_CLB)){
|
|
}
|
|
}
|
|
|
|
/*!
|
|
\brief enable DMA request
|
|
\param[in] none
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void adc_dma_mode_enable(void)
|
|
{
|
|
ADC_CTL1 |= (uint32_t)(ADC_CTL1_DMA);
|
|
}
|
|
|
|
/*!
|
|
\brief disable DMA request
|
|
\param[in] none
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void adc_dma_mode_disable(void)
|
|
{
|
|
ADC_CTL1 &= ~((uint32_t)ADC_CTL1_DMA);
|
|
}
|
|
|
|
/*!
|
|
\brief enable the temperature sensor and Vrefint channel
|
|
\param[in] none
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void adc_tempsensor_vrefint_enable(void)
|
|
{
|
|
/* enable the temperature sensor and Vrefint channel */
|
|
ADC_CTL1 |= ADC_CTL1_TSVREN;
|
|
}
|
|
|
|
/*!
|
|
\brief disable the temperature sensor and Vrefint channel
|
|
\param[in] none
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void adc_tempsensor_vrefint_disable(void)
|
|
{
|
|
/* disable the temperature sensor and Vrefint channel */
|
|
ADC_CTL1 &= ~ADC_CTL1_TSVREN;
|
|
}
|
|
|
|
/*!
|
|
\brief configure ADC discontinuous mode
|
|
\param[in] channel_group: select the channel group
|
|
only one parameter can be selected which is shown as below:
|
|
\arg ADC_REGULAR_CHANNEL: regular channel group
|
|
\arg ADC_INSERTED_CHANNEL: inserted channel group
|
|
\arg ADC_CHANNEL_DISCON_DISABLE: disable discontinuous mode of regular and inserted channel
|
|
\param[in] length: number of conversions in discontinuous mode, the number can be 1..8
|
|
for regular channel, the number has no effect for inserted channel
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void adc_discontinuous_mode_config(uint8_t channel_group, uint8_t length)
|
|
{
|
|
ADC_CTL0 &= ~((uint32_t)(ADC_CTL0_DISRC | ADC_CTL0_DISIC));
|
|
|
|
switch(channel_group){
|
|
case ADC_REGULAR_CHANNEL:
|
|
/* configure the number of conversions in discontinuous mode */
|
|
ADC_CTL0 &= ~((uint32_t)ADC_CTL0_DISNUM);
|
|
ADC_CTL0 |= CTL0_DISNUM(((uint32_t)length - 1U));
|
|
ADC_CTL0 |= (uint32_t)ADC_CTL0_DISRC;
|
|
break;
|
|
case ADC_INSERTED_CHANNEL:
|
|
ADC_CTL0 |= (uint32_t)ADC_CTL0_DISIC;
|
|
break;
|
|
case ADC_CHANNEL_DISCON_DISABLE:
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*!
|
|
\brief configure ADC special function
|
|
\param[in] function: the function to configure
|
|
one or more parameters can be selected which is shown as below:
|
|
\arg ADC_SCAN_MODE: scan mode select
|
|
\arg ADC_INSERTED_CHANNEL_AUTO: inserted channel group convert automatically
|
|
\arg ADC_CONTINUOUS_MODE: continuous mode select
|
|
\param[in] newvalue: ENABLE or DISABLE
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void adc_special_function_config(uint32_t function, ControlStatus newvalue)
|
|
{
|
|
if(newvalue){
|
|
/* enable ADC scan mode */
|
|
if(RESET != (function & ADC_SCAN_MODE)){
|
|
ADC_CTL0 |= ADC_SCAN_MODE;
|
|
}
|
|
/* enable ADC inserted channel group convert automatically */
|
|
if(RESET != (function & ADC_INSERTED_CHANNEL_AUTO)){
|
|
ADC_CTL0 |= ADC_INSERTED_CHANNEL_AUTO;
|
|
}
|
|
/* enable ADC continuous mode */
|
|
if(RESET != (function & ADC_CONTINUOUS_MODE)){
|
|
ADC_CTL1 |= ADC_CONTINUOUS_MODE;
|
|
}
|
|
}else{
|
|
/* disable ADC scan mode */
|
|
if(RESET != (function & ADC_SCAN_MODE)){
|
|
ADC_CTL0 &= ~ADC_SCAN_MODE;
|
|
}
|
|
/* disable ADC inserted channel group convert automatically */
|
|
if(RESET != (function & ADC_INSERTED_CHANNEL_AUTO)){
|
|
ADC_CTL0 &= ~ADC_INSERTED_CHANNEL_AUTO;
|
|
}
|
|
/* disable ADC continuous mode */
|
|
if(RESET != (function & ADC_CONTINUOUS_MODE)){
|
|
ADC_CTL1 &= ~ADC_CONTINUOUS_MODE;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*!
|
|
\brief configure ADC data alignment
|
|
\param[in] data_alignment: data alignment select
|
|
only one parameter can be selected which is shown as below:
|
|
\arg ADC_DATAALIGN_RIGHT: right alignment
|
|
\arg ADC_DATAALIGN_LEFT: left alignment
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void adc_data_alignment_config(uint32_t data_alignment)
|
|
{
|
|
if(ADC_DATAALIGN_RIGHT != data_alignment){
|
|
ADC_CTL1 |= ADC_CTL1_DAL;
|
|
}else{
|
|
ADC_CTL1 &= ~((uint32_t)ADC_CTL1_DAL);
|
|
}
|
|
}
|
|
|
|
/*!
|
|
\brief configure the length of regular channel group or inserted channel group
|
|
\param[in] channel_group: select the channel group
|
|
only one parameter can be selected which is shown as below:
|
|
\arg ADC_REGULAR_CHANNEL: regular channel group
|
|
\arg ADC_INSERTED_CHANNEL: inserted channel group
|
|
\param[in] length: the length of the channel
|
|
regular channel 1-16
|
|
inserted channel 1-4
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void adc_channel_length_config(uint8_t channel_group, uint32_t length)
|
|
{
|
|
switch(channel_group){
|
|
case ADC_REGULAR_CHANNEL:
|
|
/* configure the length of regular channel group */
|
|
ADC_RSQ0 &= ~((uint32_t)ADC_RSQ0_RL);
|
|
ADC_RSQ0 |= RSQ0_RL((uint32_t)(length-1U));
|
|
break;
|
|
case ADC_INSERTED_CHANNEL:
|
|
/* configure the length of inserted channel group */
|
|
ADC_ISQ &= ~((uint32_t)ADC_ISQ_IL);
|
|
ADC_ISQ |= ISQ_IL((uint32_t)(length-1U));
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*!
|
|
\brief configure ADC regular channel
|
|
\param[in] rank: the regular group sequence rank, this parameter must be between 0 to 15
|
|
\param[in] channel: the selected ADC channel
|
|
only one parameter can be selected which is shown as below:
|
|
\arg ADC_CHANNEL_x(x=0..9,16,17): ADC Channelx
|
|
\param[in] sample_time: the sample time value
|
|
only one parameter can be selected which is shown as below:
|
|
\arg ADC_SAMPLETIME_1POINT5: 1.5 cycles
|
|
\arg ADC_SAMPLETIME_7POINT5: 7.5 cycles
|
|
\arg ADC_SAMPLETIME_13POINT5: 13.5 cycles
|
|
\arg ADC_SAMPLETIME_28POINT5: 28.5 cycles
|
|
\arg ADC_SAMPLETIME_41POINT5: 41.5 cycles
|
|
\arg ADC_SAMPLETIME_55POINT5: 55.5 cycles
|
|
\arg ADC_SAMPLETIME_71POINT5: 71.5 cycles
|
|
\arg ADC_SAMPLETIME_239POINT5: 239.5 cycles
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void adc_regular_channel_config(uint8_t rank, uint8_t channel, uint32_t sample_time)
|
|
{
|
|
uint32_t rsq,sampt;
|
|
|
|
/* configure ADC regular sequence */
|
|
if(rank < 6U){
|
|
rsq = ADC_RSQ2;
|
|
rsq &= ~((uint32_t)(ADC_RSQX_RSQN << (5U*rank)));
|
|
rsq |= ((uint32_t)channel << (5U*rank));
|
|
ADC_RSQ2 = rsq;
|
|
}else if(rank < 12U){
|
|
rsq = ADC_RSQ1;
|
|
rsq &= ~((uint32_t)(ADC_RSQX_RSQN << (5U*(rank-6U))));
|
|
rsq |= ((uint32_t)channel << (5U*(rank-6U)));
|
|
ADC_RSQ1 = rsq;
|
|
}else if(rank < 16U){
|
|
rsq = ADC_RSQ0;
|
|
rsq &= ~((uint32_t)(ADC_RSQX_RSQN << (5U*(rank-12U))));
|
|
rsq |= ((uint32_t)channel << (5U*(rank-12U)));
|
|
ADC_RSQ0 = rsq;
|
|
}else{
|
|
}
|
|
|
|
/* configure ADC sampling time */
|
|
if(channel < 10U){
|
|
sampt = ADC_SAMPT1;
|
|
sampt &= ~((uint32_t)(ADC_SAMPTX_SPTN << (3U*channel)));
|
|
sampt |= (uint32_t)(sample_time << (3U*channel));
|
|
ADC_SAMPT1 = sampt;
|
|
}else if(channel < 19U){
|
|
sampt = ADC_SAMPT0;
|
|
sampt &= ~((uint32_t)(ADC_SAMPTX_SPTN << (3U*(channel-10U))));
|
|
sampt |= (uint32_t)(sample_time << (3U*(channel-10U)));
|
|
ADC_SAMPT0 = sampt;
|
|
}else{
|
|
/* illegal parameters */
|
|
}
|
|
}
|
|
|
|
/*!
|
|
\brief configure ADC inserted channel
|
|
\param[in] rank: the inserted group sequencer rank,this parameter must be between 0 to 3
|
|
\param[in] channel: the selected ADC channel
|
|
only one parameter can be selected which is shown as below:
|
|
\arg ADC_CHANNEL_x(x=0..9,16,17): ADC Channelx
|
|
\param[in] sample_time: The sample time value
|
|
only one parameter can be selected which is shown as below:
|
|
\arg ADC_SAMPLETIME_1POINT5: 1.5 cycles
|
|
\arg ADC_SAMPLETIME_7POINT5: 7.5 cycles
|
|
\arg ADC_SAMPLETIME_13POINT5: 13.5 cycles
|
|
\arg ADC_SAMPLETIME_28POINT5: 28.5 cycles
|
|
\arg ADC_SAMPLETIME_41POINT5: 41.5 cycles
|
|
\arg ADC_SAMPLETIME_55POINT5: 55.5 cycles
|
|
\arg ADC_SAMPLETIME_71POINT5: 71.5 cycles
|
|
\arg ADC_SAMPLETIME_239POINT5: 239.5 cycles
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void adc_inserted_channel_config(uint8_t rank, uint8_t channel, uint32_t sample_time)
|
|
{
|
|
uint8_t inserted_length;
|
|
uint32_t isq,sampt;
|
|
|
|
inserted_length = (uint8_t)GET_BITS(ADC_ISQ , 20U , 21U);
|
|
|
|
isq = ADC_ISQ;
|
|
isq &= ~((uint32_t)(ADC_ISQ_ISQN << (15U - (inserted_length - rank)*5U)));
|
|
isq |= ((uint32_t)channel << (15U - (inserted_length - rank)*5U));
|
|
ADC_ISQ = isq;
|
|
|
|
/* configure ADC sampling time */
|
|
if(channel < 10U){
|
|
sampt = ADC_SAMPT1;
|
|
sampt &= ~((uint32_t)(ADC_SAMPTX_SPTN << (3U*channel)));
|
|
sampt |= (uint32_t) sample_time << (3U*channel);
|
|
ADC_SAMPT1 = sampt;
|
|
}else if(channel < 19U){
|
|
sampt = ADC_SAMPT0;
|
|
sampt &= ~((uint32_t)(ADC_SAMPTX_SPTN << (3U*(channel - 10U))));
|
|
sampt |= ((uint32_t)sample_time << (3U*(channel - 10U)));
|
|
ADC_SAMPT0 = sampt;
|
|
}else{
|
|
/* illegal parameters */
|
|
}
|
|
}
|
|
|
|
/*!
|
|
\brief configure ADC inserted channel offset
|
|
\param[in] inserted_channel: insert channel select
|
|
only one parameter can be selected which is shown as below:
|
|
\arg ADC_INSERTED_CHANNEL_0: ADC inserted channel 0
|
|
\arg ADC_INSERTED_CHANNEL_1: ADC inserted channel 1
|
|
\arg ADC_INSERTED_CHANNEL_2: ADC inserted channel 2
|
|
\arg ADC_INSERTED_CHANNEL_3: ADC inserted channel 3
|
|
\param[in] offset: the offset data
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void adc_inserted_channel_offset_config(uint8_t inserted_channel, uint16_t offset)
|
|
{
|
|
uint8_t inserted_length;
|
|
uint32_t num = 0U;
|
|
|
|
inserted_length = (uint8_t)GET_BITS(ADC_ISQ, 20U, 21U);
|
|
num = 3U - (inserted_length - inserted_channel);
|
|
|
|
if(num <= 3U){
|
|
/* calculate the offset of the register */
|
|
num = num * 4U;
|
|
/* configure the offset of the selected channels */
|
|
REG32((ADC) + 0x14U + num) = IOFFX_IOFF((uint32_t)offset);
|
|
}
|
|
}
|
|
|
|
/*!
|
|
\brief enable or disable ADC external trigger
|
|
\param[in] channel_group: select the channel group
|
|
one or more parameters can be selected which is shown as below:
|
|
\arg ADC_REGULAR_CHANNEL: regular channel group
|
|
\arg ADC_INSERTED_CHANNEL: inserted channel group
|
|
\param[in] newvalue: ENABLE or DISABLE
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void adc_external_trigger_config(uint8_t channel_group, ControlStatus newvalue)
|
|
{
|
|
if(newvalue){
|
|
/* external trigger enable for regular channel */
|
|
if(RESET != (channel_group & ADC_REGULAR_CHANNEL)){
|
|
ADC_CTL1 |= ADC_CTL1_ETERC;
|
|
}
|
|
/* external trigger enable for inserted channel */
|
|
if(RESET != (channel_group & ADC_INSERTED_CHANNEL)){
|
|
ADC_CTL1 |= ADC_CTL1_ETEIC;
|
|
}
|
|
}else{
|
|
/* external trigger disable for regular channel */
|
|
if(RESET != (channel_group & ADC_REGULAR_CHANNEL)){
|
|
ADC_CTL1 &= ~ADC_CTL1_ETERC;
|
|
}
|
|
/* external trigger disable for inserted channel */
|
|
if(RESET != (channel_group & ADC_INSERTED_CHANNEL)){
|
|
ADC_CTL1 &= ~ADC_CTL1_ETEIC;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*!
|
|
\brief configure ADC external trigger source
|
|
\param[in] channel_group: select the channel group
|
|
only one parameter can be selected which is shown as below:
|
|
\arg ADC_REGULAR_CHANNEL: regular channel group
|
|
\arg ADC_INSERTED_CHANNEL: inserted channel group
|
|
\param[in] external_trigger_source: regular or inserted group trigger source
|
|
only one parameter can be selected which is shown as below:
|
|
for regular channel:
|
|
\arg ADC_EXTTRIG_REGULAR_T0_CH0: TIMER0 CH0 event select
|
|
\arg ADC_EXTTRIG_REGULAR_T0_CH1: TIMER0 CH1 event select
|
|
\arg ADC_EXTTRIG_REGULAR_T0_CH2: TIMER0 CH2 event select
|
|
\arg ADC_EXTTRIG_REGULAR_T2_TRGO: TIMER2 TRGO event select
|
|
\arg ADC_EXTTRIG_REGULAR_T14_CH0: TIMER14 CH0 event select
|
|
\arg ADC_EXTTRIG_REGULAR_EXTI_11: external interrupt line 11
|
|
\arg ADC_EXTTRIG_REGULAR_NONE: software trigger
|
|
for inserted channel:
|
|
\arg ADC_EXTTRIG_INSERTED_T0_TRGO: TIMER0 TRGO event select
|
|
\arg ADC_EXTTRIG_INSERTED_T0_CH3: TIMER0 CH3 event select
|
|
\arg ADC_EXTTRIG_INSERTED_T2_CH3: TIMER2 CH3 event select
|
|
\arg ADC_EXTTRIG_INSERTED_T14_TRGO: TIMER14 TRGO event select
|
|
\arg ADC_EXTTRIG_INSERTED_EXTI_15: external interrupt line 15
|
|
\arg ADC_EXTTRIG_INSERTED_NONE: software trigger
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void adc_external_trigger_source_config(uint8_t channel_group, uint32_t external_trigger_source)
|
|
{
|
|
switch(channel_group){
|
|
case ADC_REGULAR_CHANNEL:
|
|
/* external trigger select for regular channel */
|
|
ADC_CTL1 &= ~((uint32_t)ADC_CTL1_ETSRC);
|
|
ADC_CTL1 |= (uint32_t)external_trigger_source;
|
|
break;
|
|
case ADC_INSERTED_CHANNEL:
|
|
/* external trigger select for inserted channel */
|
|
ADC_CTL1 &= ~((uint32_t)ADC_CTL1_ETSIC);
|
|
ADC_CTL1 |= (uint32_t)external_trigger_source;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*!
|
|
\brief enable ADC software trigger
|
|
\param[in] channel_group: select the channel group
|
|
one or more parameters can be selected which is shown as below:
|
|
\arg ADC_REGULAR_CHANNEL: regular channel group
|
|
\arg ADC_INSERTED_CHANNEL: inserted channel group
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void adc_software_trigger_enable(uint8_t channel_group)
|
|
{
|
|
/* enable regular group channel software trigger */
|
|
if(RESET != (channel_group & ADC_REGULAR_CHANNEL)){
|
|
ADC_CTL1 |= ADC_CTL1_SWRCST;
|
|
}
|
|
/* enable inserted channel group software trigger */
|
|
if(RESET != (channel_group & ADC_INSERTED_CHANNEL)){
|
|
ADC_CTL1 |= ADC_CTL1_SWICST;
|
|
}
|
|
}
|
|
|
|
/*!
|
|
\brief read ADC regular group data register
|
|
\param[in] none
|
|
\param[out] none
|
|
\retval the conversion value
|
|
*/
|
|
uint16_t adc_regular_data_read(void)
|
|
{
|
|
return ((uint16_t)ADC_RDATA);
|
|
}
|
|
|
|
/*!
|
|
\brief read ADC inserted group data register
|
|
\param[in] inserted_channel: inserted channel select
|
|
only one parameter can be selected which is shown as below:
|
|
\arg ADC_INSERTED_CHANNEL_0: ADC inserted channel 0
|
|
\arg ADC_INSERTED_CHANNEL_1: ADC inserted channel 1
|
|
\arg ADC_INSERTED_CHANNEL_2: ADC inserted channel 2
|
|
\arg ADC_INSERTED_CHANNEL_3: ADC inserted channel 3
|
|
\param[out] none
|
|
\retval the conversion value
|
|
*/
|
|
uint16_t adc_inserted_data_read(uint8_t inserted_channel)
|
|
{
|
|
uint32_t idata;
|
|
/* read the data of the selected channel */
|
|
switch(inserted_channel){
|
|
case ADC_INSERTED_CHANNEL_0:
|
|
idata = ADC_IDATA0;
|
|
break;
|
|
case ADC_INSERTED_CHANNEL_1:
|
|
idata = ADC_IDATA1;
|
|
break;
|
|
case ADC_INSERTED_CHANNEL_2:
|
|
idata = ADC_IDATA2;
|
|
break;
|
|
case ADC_INSERTED_CHANNEL_3:
|
|
idata = ADC_IDATA3;
|
|
break;
|
|
default:
|
|
idata = 0U;
|
|
break;
|
|
}
|
|
return (uint16_t)idata;
|
|
}
|
|
|
|
/*!
|
|
\brief get the ADC flag bits
|
|
\param[in] flag: the adc flag bits
|
|
only one parameter can be selected which is shown as below:
|
|
\arg ADC_FLAG_WDE: analog watchdog event flag
|
|
\arg ADC_FLAG_EOC: end of group conversion flag
|
|
\arg ADC_FLAG_EOIC: end of inserted group conversion flag
|
|
\arg ADC_FLAG_STIC: start flag of inserted channel group
|
|
\arg ADC_FLAG_STRC: start flag of regular channel group
|
|
\param[out] none
|
|
\retval FlagStatus: SET or RESET
|
|
*/
|
|
FlagStatus adc_flag_get(uint32_t flag)
|
|
{
|
|
FlagStatus reval = RESET;
|
|
|
|
if(ADC_STAT & flag){
|
|
reval = SET;
|
|
}
|
|
return reval;
|
|
}
|
|
|
|
/*!
|
|
\brief clear the ADC flag
|
|
\param[in] flag: the adc flag
|
|
one or more parameters can be selected which is shown as below:
|
|
\arg ADC_FLAG_WDE: analog watchdog event flag
|
|
\arg ADC_FLAG_EOC: end of group conversion flag
|
|
\arg ADC_FLAG_EOIC: end of inserted group conversion flag
|
|
\arg ADC_FLAG_STIC: start flag of inserted channel group
|
|
\arg ADC_FLAG_STRC: start flag of regular channel group
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void adc_flag_clear(uint32_t flag)
|
|
{
|
|
ADC_STAT &= ~((uint32_t)flag);
|
|
}
|
|
|
|
/*!
|
|
\brief get the ADC interrupt flag
|
|
\param[in] flag: the adc interrupt flag
|
|
only one parameter can be selected which is shown as below:
|
|
\arg ADC_INT_FLAG_WDE: analog watchdog interrupt flag
|
|
\arg ADC_INT_FLAG_EOC: end of group conversion interrupt flag
|
|
\arg ADC_INT_FLAG_EOIC: end of inserted group conversion interrupt flag
|
|
\param[out] none
|
|
\retval FlagStatus: SET or RESET
|
|
*/
|
|
FlagStatus adc_interrupt_flag_get(uint32_t flag)
|
|
{
|
|
FlagStatus interrupt_flag = RESET;
|
|
uint32_t state;
|
|
|
|
/* check the interrupt bits */
|
|
switch(flag){
|
|
case ADC_INT_FLAG_WDE:
|
|
state = ADC_STAT & ADC_STAT_WDE;
|
|
if((ADC_CTL0 & ADC_CTL0_WDEIE) && state){
|
|
interrupt_flag = SET;
|
|
}
|
|
break;
|
|
case ADC_INT_FLAG_EOC:
|
|
state = ADC_STAT & ADC_STAT_EOC;
|
|
if((ADC_CTL0 & ADC_CTL0_EOCIE) && state){
|
|
interrupt_flag = SET;
|
|
}
|
|
break;
|
|
case ADC_INT_FLAG_EOIC:
|
|
state = ADC_STAT & ADC_STAT_EOIC;
|
|
if((ADC_CTL0 & ADC_CTL0_EOICIE) && state){
|
|
interrupt_flag = SET;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
return interrupt_flag;
|
|
}
|
|
|
|
/*!
|
|
\brief clear ADC interrupt flag
|
|
\param[in] flag: the adc interrupt flag
|
|
only one parameter can be selected which is shown as below:
|
|
\arg ADC_INT_FLAG_WDE: analog watchdog interrupt flag
|
|
\arg ADC_INT_FLAG_EOC: end of group conversion interrupt flag
|
|
\arg ADC_INT_FLAG_EOIC: end of inserted group conversion interrupt flag
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void adc_interrupt_flag_clear(uint32_t flag)
|
|
{
|
|
ADC_STAT &= ~((uint32_t)flag);
|
|
}
|
|
|
|
/*!
|
|
\brief enable ADC interrupt
|
|
\param[in] interrupt: the adc interrupt
|
|
one or more parameters can be selected which is shown as below:
|
|
\arg ADC_INT_WDE: analog watchdog interrupt
|
|
\arg ADC_INT_EOC: end of group conversion interrupt
|
|
\arg ADC_INT_EOIC: end of inserted group conversion interrupt
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void adc_interrupt_enable(uint32_t interrupt)
|
|
{
|
|
/* enable analog watchdog interrupt */
|
|
if(RESET != (interrupt & ADC_INT_WDE)){
|
|
ADC_CTL0 |= (uint32_t)ADC_CTL0_WDEIE;
|
|
}
|
|
|
|
/* enable end of group conversion interrupt */
|
|
if(RESET != (interrupt & ADC_INT_EOC)){
|
|
ADC_CTL0 |= (uint32_t)ADC_CTL0_EOCIE;
|
|
}
|
|
|
|
/* enable end of inserted group conversion interrupt */
|
|
if(RESET != (interrupt & ADC_INT_EOIC)){
|
|
ADC_CTL0 |= (uint32_t)ADC_CTL0_EOICIE;
|
|
}
|
|
}
|
|
|
|
/*!
|
|
\brief disable ADC interrupt
|
|
\param[in] interrupt: the adc interrupt flag
|
|
one or more parameters can be selected which is shown as below:
|
|
\arg ADC_INT_WDE: analog watchdog interrupt
|
|
\arg ADC_INT_EOC: end of group conversion interrupt
|
|
\arg ADC_INT_EOIC: end of inserted group conversion interrupt
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void adc_interrupt_disable(uint32_t interrupt)
|
|
{
|
|
/* disable analog watchdog interrupt */
|
|
if(RESET != (interrupt & ADC_INT_WDE)){
|
|
ADC_CTL0 &= ~(uint32_t)ADC_CTL0_WDEIE;
|
|
}
|
|
|
|
/* disable end of group conversion interrupt */
|
|
if(RESET != (interrupt & ADC_INT_EOC)){
|
|
ADC_CTL0 &= ~(uint32_t)ADC_CTL0_EOCIE;
|
|
}
|
|
|
|
/* disable end of inserted group conversion interrupt */
|
|
if(RESET != (interrupt & ADC_INT_EOIC)){
|
|
ADC_CTL0 &= ~(uint32_t)ADC_CTL0_EOICIE;
|
|
}
|
|
}
|
|
|
|
/*!
|
|
\brief configure ADC analog watchdog single channel
|
|
\param[in] channel: the selected ADC channel
|
|
only one parameter can be selected which is shown as below:
|
|
\arg ADC_CHANNEL_x(x=0..9,16,17): ADC Channelx
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void adc_watchdog_single_channel_enable(uint8_t channel)
|
|
{
|
|
ADC_CTL0 &= (uint32_t)~(ADC_CTL0_RWDEN | ADC_CTL0_IWDEN | ADC_CTL0_WDSC | ADC_CTL0_WDCHSEL);
|
|
|
|
ADC_CTL0 |= (uint32_t)channel;
|
|
ADC_CTL0 |= (uint32_t)(ADC_CTL0_RWDEN | ADC_CTL0_IWDEN | ADC_CTL0_WDSC);
|
|
}
|
|
|
|
/*!
|
|
\brief configure ADC analog watchdog group channel
|
|
\param[in] channel_group: the channel group use analog watchdog
|
|
only one parameter can be selected which is shown as below:
|
|
\arg ADC_REGULAR_CHANNEL: regular channel group
|
|
\arg ADC_INSERTED_CHANNEL: inserted channel group
|
|
\arg ADC_REGULAR_INSERTED_CHANNEL: both regular and inserted group
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void adc_watchdog_group_channel_enable(uint8_t channel_group)
|
|
{
|
|
ADC_CTL0 &= (uint32_t)~(ADC_CTL0_RWDEN | ADC_CTL0_IWDEN | ADC_CTL0_WDSC);
|
|
|
|
/* select the group */
|
|
switch(channel_group){
|
|
case ADC_REGULAR_CHANNEL:
|
|
ADC_CTL0 |= (uint32_t)ADC_CTL0_RWDEN;
|
|
break;
|
|
case ADC_INSERTED_CHANNEL:
|
|
ADC_CTL0 |= (uint32_t)ADC_CTL0_IWDEN;
|
|
break;
|
|
case ADC_REGULAR_INSERTED_CHANNEL:
|
|
ADC_CTL0 |= (uint32_t)(ADC_CTL0_RWDEN | ADC_CTL0_IWDEN);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*!
|
|
\brief disable ADC analog watchdog
|
|
\param[in] none
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void adc_watchdog_disable(void)
|
|
{
|
|
ADC_CTL0 &= (uint32_t)~(ADC_CTL0_RWDEN | ADC_CTL0_IWDEN | ADC_CTL0_WDSC | ADC_CTL0_WDCHSEL);
|
|
}
|
|
|
|
/*!
|
|
\brief configure ADC analog watchdog threshold
|
|
\param[in] low_threshold: analog watchdog low threshold,0..4095
|
|
\param[in] high_threshold: analog watchdog high threshold,0..4095
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void adc_watchdog_threshold_config(uint16_t low_threshold, uint16_t high_threshold)
|
|
{
|
|
ADC_WDLT = (uint32_t)WDLT_WDLT(low_threshold);
|
|
ADC_WDHT = (uint32_t)WDHT_WDHT(high_threshold);
|
|
}
|
|
|
|
|
|
/*!
|
|
\brief configure ADC resolution
|
|
\param[in] resolution: ADC resolution
|
|
only one parameter can be selected which is shown as below:
|
|
\arg ADC_RESOLUTION_12B: 12-bit ADC resolution
|
|
\arg ADC_RESOLUTION_10B: 10-bit ADC resolution
|
|
\arg ADC_RESOLUTION_8B: 8-bit ADC resolution
|
|
\arg ADC_RESOLUTION_6B: 6-bit ADC resolution
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void adc_resolution_config(uint32_t resolution)
|
|
{
|
|
ADC_CTL0 &= ~((uint32_t)ADC_CTL0_DRES);
|
|
ADC_CTL0 |= (uint32_t)resolution;
|
|
}
|
|
|
|
/*!
|
|
\brief configure ADC oversample mode
|
|
\param[in] mode: ADC oversampling mode
|
|
only one parameter can be selected which is shown as below:
|
|
\arg ADC_OVERSAMPLING_ALL_CONVERT: all oversampled conversions for a channel are done consecutively after a trigger
|
|
\arg ADC_OVERSAMPLING_ONE_CONVERT: each oversampled conversion for a channel needs a trigger
|
|
\param[in] shift: ADC oversampling shift
|
|
only one parameter can be selected which is shown as below:
|
|
\arg ADC_OVERSAMPLING_SHIFT_NONE: no oversampling shift
|
|
\arg ADC_OVERSAMPLING_SHIFT_1B: 1-bit oversampling shift
|
|
\arg ADC_OVERSAMPLING_SHIFT_2B: 2-bit oversampling shift
|
|
\arg ADC_OVERSAMPLING_SHIFT_3B: 3-bit oversampling shift
|
|
\arg ADC_OVERSAMPLING_SHIFT_4B: 3-bit oversampling shift
|
|
\arg ADC_OVERSAMPLING_SHIFT_5B: 5-bit oversampling shift
|
|
\arg ADC_OVERSAMPLING_SHIFT_6B: 6-bit oversampling shift
|
|
\arg ADC_OVERSAMPLING_SHIFT_7B: 7-bit oversampling shift
|
|
\arg ADC_OVERSAMPLING_SHIFT_8B: 8-bit oversampling shift
|
|
\param[in] ratio: ADC oversampling ratio
|
|
only one parameter can be selected which is shown as below:
|
|
\arg ADC_OVERSAMPLING_RATIO_MUL2: oversampling ratio multiple 2
|
|
\arg ADC_OVERSAMPLING_RATIO_MUL4: oversampling ratio multiple 4
|
|
\arg ADC_OVERSAMPLING_RATIO_MUL8: oversampling ratio multiple 8
|
|
\arg ADC_OVERSAMPLING_RATIO_MUL16: oversampling ratio multiple 16
|
|
\arg ADC_OVERSAMPLING_RATIO_MUL32: oversampling ratio multiple 32
|
|
\arg ADC_OVERSAMPLING_RATIO_MUL64: oversampling ratio multiple 64
|
|
\arg ADC_OVERSAMPLING_RATIO_MUL128: oversampling ratio multiple 128
|
|
\arg ADC_OVERSAMPLING_RATIO_MUL256: oversampling ratio multiple 256
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void adc_oversample_mode_config(uint8_t mode, uint16_t shift, uint8_t ratio)
|
|
{
|
|
/* configure ADC oversampling mode */
|
|
if(ADC_OVERSAMPLING_ONE_CONVERT == mode){
|
|
ADC_OVSAMPCTL |= (uint32_t)ADC_OVSAMPCTL_TOVS;
|
|
}else{
|
|
ADC_OVSAMPCTL &= ~((uint32_t)ADC_OVSAMPCTL_TOVS);
|
|
}
|
|
|
|
/* configure the shift and ratio */
|
|
ADC_OVSAMPCTL &= ~((uint32_t)(ADC_OVSAMPCTL_OVSR | ADC_OVSAMPCTL_OVSS));
|
|
ADC_OVSAMPCTL |= ((uint32_t)shift | (uint32_t)ratio);
|
|
}
|
|
|
|
/*!
|
|
\brief enable ADC oversample mode
|
|
\param[in] none
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void adc_oversample_mode_enable(void)
|
|
{
|
|
ADC_OVSAMPCTL |= ADC_OVSAMPCTL_OVSEN;
|
|
}
|
|
|
|
/*!
|
|
\brief disable ADC oversample mode
|
|
\param[in] none
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void adc_oversample_mode_disable(void)
|
|
{
|
|
ADC_OVSAMPCTL &= ~((uint32_t)ADC_OVSAMPCTL_OVSEN);
|
|
}
|