147 lines
7.3 KiB
C
147 lines
7.3 KiB
C
/*!
|
|
\file gd32e230_pmu.h
|
|
\brief definitions for the PMU
|
|
|
|
\version 2018-06-19, V1.0.0, firmware for GD32E230
|
|
*/
|
|
|
|
/*
|
|
Copyright (c) 2018, GigaDevice Semiconductor Inc.
|
|
|
|
All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or without modification,
|
|
are permitted provided that the following conditions are met:
|
|
|
|
1. Redistributions of source code must retain the above copyright notice, this
|
|
list of conditions and the following disclaimer.
|
|
2. Redistributions in binary form must reproduce the above copyright notice,
|
|
this list of conditions and the following disclaimer in the documentation
|
|
and/or other materials provided with the distribution.
|
|
3. Neither the name of the copyright holder nor the names of its contributors
|
|
may be used to endorse or promote products derived from this software without
|
|
specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
|
|
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
|
|
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
|
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
|
|
OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#ifndef GD32E230_PMU_H
|
|
#define GD32E230_PMU_H
|
|
|
|
#include "gd32e230.h"
|
|
|
|
/* PMU definitions */
|
|
#define PMU PMU_BASE /*!< PMU base address */
|
|
|
|
/* registers definitions */
|
|
#define PMU_CTL REG32((PMU) + 0x00U) /*!< PMU control register */
|
|
#define PMU_CS REG32((PMU) + 0x04U) /*!< PMU control and status register */
|
|
|
|
/* bits definitions */
|
|
/* PMU_CTL */
|
|
#define PMU_CTL_LDOLP BIT(0) /*!< LDO low power mode */
|
|
#define PMU_CTL_STBMOD BIT(1) /*!< standby mode */
|
|
#define PMU_CTL_WURST BIT(2) /*!< wakeup flag reset */
|
|
#define PMU_CTL_STBRST BIT(3) /*!< standby flag reset */
|
|
#define PMU_CTL_LVDEN BIT(4) /*!< low voltage detector enable */
|
|
#define PMU_CTL_LVDT BITS(5,7) /*!< low voltage detector threshold */
|
|
#define PMU_CTL_BKPWEN BIT(8) /*!< backup domain write enable */
|
|
#define PMU_CTL_LDOVS_0 BIT(14) /*!< LDO output voltage select */
|
|
#define PMU_CTL_LDOVS_1 BIT(15) /*!< LDO output voltage select */
|
|
#define PMU_CTL_LDOVS BITS(14,15) /*!< LDO output voltage select */
|
|
|
|
/* PMU_CS */
|
|
#define PMU_CS_WUF BIT(0) /*!< wakeup flag */
|
|
#define PMU_CS_STBF BIT(1) /*!< standby flag */
|
|
#define PMU_CS_LVDF BIT(2) /*!< low voltage detector status flag */
|
|
#define PMU_CS_WUPEN0 BIT(8) /*!< wakeup pin enable */
|
|
#define PMU_CS_WUPEN1 BIT(9) /*!< wakeup pin enable */
|
|
#define PMU_CS_WUPEN5 BIT(13) /*!< wakeup pin enable */
|
|
#define PMU_CS_WUPEN6 BIT(14) /*!< wakeup pin enable */
|
|
|
|
/* constants definitions */
|
|
/* PMU low voltage detector threshold definitions */
|
|
#define CTL_LVDT(regval) (BITS(5,7)&((uint32_t)(regval)<<5))
|
|
#define PMU_LVDT_0 CTL_LVDT(0) /*!< voltage threshold is 2.1V */
|
|
#define PMU_LVDT_1 CTL_LVDT(1) /*!< voltage threshold is 2.3V */
|
|
#define PMU_LVDT_2 CTL_LVDT(2) /*!< voltage threshold is 2.4V */
|
|
#define PMU_LVDT_3 CTL_LVDT(3) /*!< voltage threshold is 2.6V */
|
|
#define PMU_LVDT_4 CTL_LVDT(4) /*!< voltage threshold is 2.7V */
|
|
#define PMU_LVDT_5 CTL_LVDT(5) /*!< voltage threshold is 2.9V */
|
|
#define PMU_LVDT_6 CTL_LVDT(6) /*!< voltage threshold is 3.0V */
|
|
#define PMU_LVDT_7 CTL_LVDT(7) /*!< voltage threshold is 3.1V */
|
|
|
|
/* PMU LDO output voltage select definitions */
|
|
#define CTL_LDOVS(regval) (BITS(14,15)&((uint32_t)(regval)<<14))
|
|
#define PMU_LDOVS_HIGH CTL_LDOVS(1) /*!< LDO output voltage high mode */
|
|
#define PMU_LDOVS_LOW CTL_LDOVS(2) /*!< LDO output voltage low mode */
|
|
|
|
/* PMU ldo definitions */
|
|
#define PMU_LDO_NORMAL ((uint32_t)0x00000000U) /*!< LDO operates normally when PMU enter deepsleep mode */
|
|
#define PMU_LDO_LOWPOWER PMU_CTL_LDOLP /*!< LDO work at low power status when PMU enter deepsleep mode */
|
|
|
|
/* PMU flag definitions */
|
|
#define PMU_FLAG_WAKEUP PMU_CS_WUF /*!< wakeup flag status */
|
|
#define PMU_FLAG_STANDBY PMU_CS_STBF /*!< standby flag status */
|
|
#define PMU_FLAG_LVD PMU_CS_LVDF /*!< LVD flag status */
|
|
|
|
/* PMU WKUP pin definitions */
|
|
#define PMU_WAKEUP_PIN0 PMU_CS_WUPEN0 /*!< WKUP Pin 0 (PA0) enable */
|
|
#define PMU_WAKEUP_PIN1 PMU_CS_WUPEN1 /*!< WKUP Pin 1 (PC13) enable */
|
|
#define PMU_WAKEUP_PIN5 PMU_CS_WUPEN5 /*!< WKUP Pin 5 (PB5) enable */
|
|
#define PMU_WAKEUP_PIN6 PMU_CS_WUPEN6 /*!< WKUP Pin 6 (PB15) enable */
|
|
|
|
/* PMU flag reset definitions */
|
|
#define PMU_FLAG_RESET_WAKEUP PMU_CTL_WURST /*!< wakeup flag reset */
|
|
#define PMU_FLAG_RESET_STANDBY PMU_CTL_STBRST /*!< standby flag reset */
|
|
|
|
/* PMU command constants definitions */
|
|
#define WFI_CMD ((uint8_t)0x00U) /*!< use WFI command */
|
|
#define WFE_CMD ((uint8_t)0x01U) /*!< use WFE command */
|
|
|
|
/* function declarations */
|
|
/* reset PMU registers */
|
|
void pmu_deinit(void);
|
|
|
|
/* select low voltage detector threshold */
|
|
void pmu_lvd_select(uint32_t lvdt_n);
|
|
/* select LDO output voltage */
|
|
void pmu_ldo_output_select(uint32_t ldo_output);
|
|
/* disable PMU lvd */
|
|
void pmu_lvd_disable(void);
|
|
|
|
/* set PMU mode */
|
|
/* PMU work in sleep mode */
|
|
void pmu_to_sleepmode(uint8_t sleepmodecmd);
|
|
/* PMU work in deepsleep mode */
|
|
void pmu_to_deepsleepmode(uint32_t ldo, uint8_t deepsleepmodecmd);
|
|
/* PMU work in standby mode */
|
|
void pmu_to_standbymode(uint8_t standbymodecmd);
|
|
/* enable PMU wakeup pin */
|
|
void pmu_wakeup_pin_enable(uint32_t wakeup_pin);
|
|
/* disable PMU wakeup pin */
|
|
void pmu_wakeup_pin_disable(uint32_t wakeup_pin);
|
|
|
|
/* backup related functions */
|
|
/* enable backup domain write */
|
|
void pmu_backup_write_enable(void);
|
|
/* disable backup domain write */
|
|
void pmu_backup_write_disable(void);
|
|
|
|
/* flag functions */
|
|
/* clear flag bit */
|
|
void pmu_flag_clear(uint32_t flag_clear);
|
|
/* get flag state */
|
|
FlagStatus pmu_flag_get(uint32_t flag);
|
|
|
|
#endif /* GD32E230_PMU_H */
|