rt-thread-official/bsp/stm32f20x/Drivers/24LCxx.c

168 lines
3.6 KiB
C

/*
* File : 24LCxx.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2006, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2011-09-21 JoyChen First version, support 24LC024H eeprom device
*/
#include <rtthread.h>
#include "i2c.h"
#define EE_Address 0xA0
#define EE24LC024H
/*
Note: If eeprom size lager then 256 byte, you must define EE_ADDR_SIZE == I2C_MEM_2Bytes
*/
#ifdef EE24LC024H
#define EE_PageSize 8
#define EE_ADDR_SIZE I2C_MEM_1Byte
#define EE_MEM_SIZE 256
#define EE_PageSize 16
#endif
static struct rt_device ee_dev;
uint32_t EE_ReadBuffer(uint8_t* pBuffer, uint16_t ReadAddr, uint16_t NumByteToRead)
{
return I2C_IORW(I2C1, pBuffer, NumByteToRead, ReadAddr, EE_Address | 0x01, I2C_MEM_1Byte );
}
uint32_t EE_WritePage(uint8_t* pBuffer, uint16_t WriteAddr)
{
I2C_IORW(I2C1, pBuffer, EE_PageSize , WriteAddr, EE_Address , EE_ADDR_SIZE );
/*if( I2C_AcknowledgePolling(I2C1 , EE_Address) == Error )
rt_kprintf("EE ACK failed\n");*/
rt_thread_delay(50);
}
uint32_t EE_WriteByte(uint8_t* pBuffer, uint16_t WriteAddr)
{
I2C_IORW(I2C1, pBuffer, 1 , WriteAddr, EE_Address, EE_ADDR_SIZE );
/*if( I2C_AcknowledgePolling(I2C1 , EE_Address) == Error )
rt_kprintf("EE ACK failed\n");*/
rt_thread_delay(50);
}
Status EE_WriteBuffer(uint8_t* pBuffer, uint16_t WriteAddr, uint16_t NumByteToWrite)
{
uint8_t NumOfPage = 0, NumOfSingle = 0;
uint16_t Addr = 0,count = 0;
uint8_t* ptr = pBuffer;
Addr = WriteAddr;
count = NumByteToWrite;
if( (WriteAddr + NumByteToWrite ) > EE_MEM_SIZE )
return Error;
while( count >= EE_PageSize )
{
EE_WritePage(ptr, Addr);
Addr += EE_PageSize;
count -= EE_PageSize;
ptr += EE_PageSize;
}
while( count )
{
EE_WriteByte( ptr++, Addr++ );
count--;
}
return Success;
}
static rt_err_t ee24LCxx_init (rt_device_t dev)
{
return RT_EOK;
}
static rt_size_t ee24LCxx_read( rt_device_t dev, rt_off_t pos, void *buf, rt_size_t size )
{
if( EE_ReadBuffer(buf, pos, size) == Success )
return size;
else
return -1;
}
static rt_size_t ee24LCxx_write( rt_device_t dev, rt_off_t pos, void *buf, rt_size_t size )
{
if( EE_WriteBuffer(buf, pos, size) == Success )
return size;
else
return -1;
}
static rt_err_t ee24LCxx_open(rt_device_t dev, rt_uint16_t oflag)
{
return RT_EOK;
}
static rt_err_t ee24LCxx_close(rt_device_t dev)
{
return RT_EOK;
}
static rt_err_t ee24LCxx_control (rt_device_t dev, rt_uint8_t cmd, void *args)
{
return RT_EOK;
}
void ee24LCxx_hw_init()
{
I2C1_INIT();
ee_dev.init = ee24LCxx_init;
ee_dev.open = ee24LCxx_open;
ee_dev.close = ee24LCxx_close;
ee_dev.read = ee24LCxx_read;
ee_dev.write = ee24LCxx_write;
ee_dev.control = ee24LCxx_control;
ee_dev.type = RT_Device_Class_I2C;
rt_device_register(&ee_dev, "eeprom", RT_DEVICE_FLAG_RDWR);
}
void ee_test()
{
char buf[256], read[256];
int i,ret;
rt_device_t dev;
dev = rt_device_find("eeprom");
for(i = 0; i < 256; i++ )
{
buf[i] = i;
read[i] = 0;
}
if( rt_device_write(dev, 0, buf, 256 ) == 256 )
rt_kprintf("Write Success\n");
rt_device_read(dev, 0, read, 256 );
for(i = 0; i < 256; i++ )
{
if( buf[i] != read[i] )
rt_kprintf("EE Failed %X != %X at %d\n", buf[i], read[i], i);
}
rt_kprintf("Finsh\n");
}
#ifdef RT_USING_FINSH
#include <finsh.h>
FINSH_FUNCTION_EXPORT(ee_test, test system);
#endif