rt-thread-official/bsp/imxrt/libraries/drivers/drv_eth.c

1325 lines
42 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
* Copyright (c) 2006-2023, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2017-10-10 Tanek the first version
* 2019-5-10 misonyo add DMA TX and RX function
* 2020-10-14 wangqiang use phy device in phy monitor thread
* 2022-08-29 xjy198903 add 1170 rgmii support
*/
#include <rtthread.h>
#include "board.h"
#include <rtdevice.h>
#ifdef RT_USING_FINSH
#include <finsh.h>
#endif
#include "fsl_enet.h"
#include "fsl_gpio.h"
#include "fsl_cache.h"
#include "fsl_iomuxc.h"
#include "fsl_common.h"
#ifdef RT_USING_LWIP
#include <netif/ethernetif.h>
#include "lwipopts.h"
#define ENET_RXBD_NUM (5)
#define ENET_TXBD_NUM (3)
#define ENET_RXBUFF_SIZE (ENET_FRAME_MAX_FRAMELEN)
#define ENET_TXBUFF_SIZE (ENET_FRAME_MAX_FRAMELEN)
/* debug option */
#define ETH_RX_DUMP
#undef ETH_RX_DUMP
#define ETH_TX_DUMP
#undef ETH_TX_DUMP
#define DBG_ENABLE
#define DBG_SECTION_NAME "[ETH]"
#define DBG_COLOR
#define DBG_LEVEL DBG_INFO
#include <rtdbg.h>
#define RING_ID 0
#define ENET_RING_NUM 1U
#define MAX_ADDR_LEN 6
//#ifdef SOC_IMXRT1170_SERIES
typedef uint8_t rx_buffer_t[RT_ALIGN(ENET_TXBUFF_SIZE, ENET_BUFF_ALIGNMENT)];
typedef uint8_t tx_buffer_t[RT_ALIGN(ENET_TXBUFF_SIZE, ENET_BUFF_ALIGNMENT)];
#ifndef ENET_RXBUFF_NUM
#define ENET_RXBUFF_NUM (ENET_RXBD_NUM * 2)
#endif
//#endif
//#ifdef SOC_IMXRT1170_SERIES
typedef void (*pbuf_free_custom_fn)(struct pbuf *p);
/** A custom pbuf: like a pbuf, but following a function pointer to free it. */
struct pbuf_custom
{
/** The actual pbuf */
struct pbuf pbuf;
/** This function is called when pbuf_free deallocates this pbuf(_custom) */
pbuf_free_custom_fn custom_free_function;
};
typedef struct rx_pbuf_wrapper
{
struct pbuf_custom p; /*!< Pbuf wrapper. Has to be first. */
void *buffer; /*!< Original buffer wrapped by p. */
volatile bool buffer_used; /*!< Wrapped buffer is used by ENET */
} rx_pbuf_wrapper_t;
//#endif
struct rt_imxrt_eth
{
/* inherit from ethernet device */
struct eth_device parent;
enet_handle_t enet_handle;
ENET_Type *enet_base;
enet_data_error_stats_t error_statistic;
rt_uint8_t dev_addr[MAX_ADDR_LEN]; /* hw address */
rt_bool_t tx_is_waiting;
struct rt_semaphore tx_wait;
struct rt_semaphore buff_wait;
enet_mii_speed_t speed;
enet_mii_duplex_t duplex;
//#ifdef SOC_IMXRT1170_SERIES
enet_rx_bd_struct_t *RxBuffDescrip;
enet_tx_bd_struct_t *TxBuffDescrip;
rx_buffer_t *RxDataBuff;
tx_buffer_t *TxDataBuff;
rx_pbuf_wrapper_t RxPbufs[ENET_RXBUFF_NUM];
//#endif
};
//#if defined(__ICCARM__) /* IAR Workbench */
//#pragma location = "enet_mem_section"
//ALIGN(ENET_BUFF_ALIGNMENT)
//static enet_tx_bd_struct_t g_txBuffDescrip[ENET_TXBD_NUM];
//
//ALIGN(ENET_BUFF_ALIGNMENT)
//rt_uint8_t g_txDataBuff[ENET_TXBD_NUM][RT_ALIGN(ENET_TXBUFF_SIZE, ENET_BUFF_ALIGNMENT)];
//
//#pragma location = "enet_mem_section"
//ALIGN(ENET_BUFF_ALIGNMENT)
//static enet_rx_bd_struct_t g_rxBuffDescrip[ENET_RXBD_NUM];
//
//ALIGN(ENET_BUFF_ALIGNMENT)
//rt_uint8_t g_rxDataBuff[ENET_RXBD_NUM][RT_ALIGN(ENET_RXBUFF_SIZE, ENET_BUFF_ALIGNMENT)];
//
//#else
AT_NONCACHEABLE_SECTION_ALIGN(static enet_tx_bd_struct_t g_txBuffDescrip[ENET_TXBD_NUM], ENET_BUFF_ALIGNMENT);
rt_align(ENET_BUFF_ALIGNMENT)
rt_uint8_t g_txDataBuff[ENET_TXBD_NUM][RT_ALIGN(ENET_TXBUFF_SIZE, ENET_BUFF_ALIGNMENT)];
AT_NONCACHEABLE_SECTION_ALIGN(static enet_rx_bd_struct_t g_rxBuffDescrip[ENET_RXBD_NUM], ENET_BUFF_ALIGNMENT);
rt_align(ENET_BUFF_ALIGNMENT)
rt_uint8_t g_rxDataBuff[ENET_RXBD_NUM][RT_ALIGN(ENET_RXBUFF_SIZE, ENET_BUFF_ALIGNMENT)];
//#endif
static struct rt_imxrt_eth imxrt_eth_device;
void _enet_rx_callback(struct rt_imxrt_eth *eth)
{
rt_err_t result;
ENET_DisableInterrupts(eth->enet_base, kENET_RxFrameInterrupt);
result = eth_device_ready(&(eth->parent));
if (result != RT_EOK)
rt_kprintf("RX err =%d\n", result);
}
void _enet_tx_callback(struct rt_imxrt_eth *eth)
{
dbg_log(DBG_LOG, "_enet_tx_callback\n");
if (eth->tx_is_waiting == RT_TRUE)
{
eth->tx_is_waiting = RT_FALSE;
rt_sem_release(&eth->tx_wait);
}
}
static void _enet_callback(ENET_Type *base,
enet_handle_t *handle,
#if FSL_FEATURE_ENET_QUEUE > 1
uint32_t ringId,
#endif /* FSL_FEATURE_ENET_QUEUE */
enet_event_t event,
enet_frame_info_t *frameInfo,
void *userData)
{
switch (event)
{
case kENET_RxEvent:
_enet_rx_callback((struct rt_imxrt_eth *)userData);
break;
case kENET_TxEvent:
_enet_tx_callback((struct rt_imxrt_eth *)userData);
break;
case kENET_ErrEvent:
dbg_log(DBG_LOG, "kENET_ErrEvent\n");
break;
case kENET_WakeUpEvent:
dbg_log(DBG_LOG, "kENET_WakeUpEvent\n");
break;
case kENET_TimeStampEvent:
dbg_log(DBG_LOG, "kENET_TimeStampEvent\n");
break;
case kENET_TimeStampAvailEvent:
dbg_log(DBG_LOG, "kENET_TimeStampAvailEvent \n");
break;
default:
dbg_log(DBG_LOG, "unknow error\n");
break;
}
}
static void _enet_clk_init(void)
{
#ifdef SOC_IMXRT1170_SERIES
#ifdef PHY_USING_RTL8211F
const clock_sys_pll1_config_t sysPll1Config = {
.pllDiv2En = true,
};
CLOCK_InitSysPll1(&sysPll1Config);
clock_root_config_t rootCfg = {.mux = 4, .div = 4}; /* Generate 125M root clock. */
CLOCK_SetRootClock(kCLOCK_Root_Enet2, &rootCfg);
IOMUXC_GPR->GPR5 |= IOMUXC_GPR_GPR5_ENET1G_RGMII_EN_MASK; /* bit1:iomuxc_gpr_enet_clk_dir
bit0:GPR_ENET_TX_CLK_SEL(internal or OSC) */
#else
const clock_sys_pll1_config_t sysPll1Config = {
.pllDiv2En = true,
};
CLOCK_InitSysPll1(&sysPll1Config);
clock_root_config_t rootCfg = {.mux = 4, .div = 10}; /* Generate 50M root clock. */
CLOCK_SetRootClock(kCLOCK_Root_Enet1, &rootCfg);
/* Select syspll2pfd3, 528*18/24 = 396M */
CLOCK_InitPfd(kCLOCK_PllSys2, kCLOCK_Pfd3, 24);
rootCfg.mux = 7;
rootCfg.div = 2;
CLOCK_SetRootClock(kCLOCK_Root_Bus, &rootCfg); /* Generate 198M bus clock. */
IOMUXC_GPR->GPR4 |= 0x3;
#endif
#else
// const clock_enet_pll_config_t config = {.enableClkOutput = true, .enableClkOutput25M = false, .loopDivider = 1};
// CLOCK_InitEnetPll(&config);
//
// IOMUXC_EnableMode(IOMUXC_GPR, kIOMUXC_GPR_ENET1TxClkOutputDir, true);
// IOMUXC_GPR->GPR1 |= 1 << 23;
/* Set 50MHz output clock required by PHY. */
const clock_enet_pll_config_t config = {.enableClkOutput = true, .loopDivider = 1};
#if defined(SOC_IMXRT1020_SERIES)
const clock_enet_pll_config_t config = {.enableClkOutput = true, .enableClkOutput500M = true, .loopDivider = 1};
#endif
CLOCK_InitEnetPll(&config);
/* Output 50M clock to PHY. */
IOMUXC_EnableMode(IOMUXC_GPR, kIOMUXC_GPR_ENET1TxClkOutputDir, true);
#endif
}
//#ifdef SOC_IMXRT1170_SERIES
static void *_enet_rx_alloc(ENET_Type *base, void *userData, uint8_t ringId)
{
void *buffer = NULL;
int i;
// dbg_log(DBG_LOG, "get buff_wait sem in %d\r\n", __LINE__);
rt_sem_take(&imxrt_eth_device.buff_wait, RT_WAITING_FOREVER);
for (i = 0; i < ENET_RXBUFF_NUM; i++)
{
if (!imxrt_eth_device.RxPbufs[i].buffer_used)
{
imxrt_eth_device.RxPbufs[i].buffer_used = true;
buffer = &imxrt_eth_device.RxDataBuff[i];
break;
}
}
rt_sem_release(&imxrt_eth_device.buff_wait);
// dbg_log(DBG_LOG, "release buff_wait sem in %d\r\n", __LINE__);
return buffer;
}
static void _enet_rx_free(ENET_Type *base, void *buffer, void *userData, uint8_t ringId)
{
int idx = ((rx_buffer_t *)buffer) - imxrt_eth_device.RxDataBuff;
if (!((idx >= 0) && (idx < ENET_RXBUFF_NUM)))
{
LOG_E("Freed buffer out of range\r\n");
}
// dbg_log(DBG_LOG, "get buff_wait sem in %d\r\n", __LINE__);
rt_sem_take(&imxrt_eth_device.buff_wait, RT_WAITING_FOREVER);
if (!(imxrt_eth_device.RxPbufs[idx].buffer_used))
{
LOG_E("_enet_rx_free: freeing unallocated buffer\r\n");
}
imxrt_eth_device.RxPbufs[idx].buffer_used = false;
rt_sem_release(&imxrt_eth_device.buff_wait);
// dbg_log(DBG_LOG, "release buff_wait sem in %d\r\n", __LINE__);
}
/**
* Reclaims RX buffer held by the p after p is no longer used
* by the application / lwIP.
*/
static void _enet_rx_release(struct pbuf *p)
{
rx_pbuf_wrapper_t *wrapper = (rx_pbuf_wrapper_t *)p;
_enet_rx_free(imxrt_eth_device.enet_base, wrapper->buffer, &imxrt_eth_device, 0);
}
//#endif
static void _enet_config(void)
{
enet_config_t config;
uint32_t sysClock;
/* prepare the buffer configuration. */
//#ifndef SOC_IMXRT1170_SERIES
// enet_buffer_config_t buffConfig[] =
// {
// ENET_RXBD_NUM,
// ENET_TXBD_NUM,
// SDK_SIZEALIGN(ENET_RXBUFF_SIZE, ENET_BUFF_ALIGNMENT),
// SDK_SIZEALIGN(ENET_TXBUFF_SIZE, ENET_BUFF_ALIGNMENT),
// &g_rxBuffDescrip[0],
// &g_txBuffDescrip[0],
// &g_rxDataBuff[0][0],
// &g_txDataBuff[0][0],
// };
// /* Get default configuration. */
// /*
// * config.miiMode = kENET_RmiiMode;
// * config.miiSpeed = kENET_MiiSpeed100M;
// * config.miiDuplex = kENET_MiiFullDuplex;
// * config.rxMaxFrameLen = ENET_FRAME_MAX_FRAMELEN;
// */
//
// ENET_GetDefaultConfig(&config);
// config.ringNum = ENET_RING_NUM;
// config.miiSpeed = imxrt_eth_device.speed;
// config.miiDuplex = imxrt_eth_device.duplex;
//
////#ifdef PHY_USING_RTL8211F
//// config.miiMode = kENET_RgmiiMode;
//// EnableIRQ(ENET_1G_MAC0_Tx_Rx_1_IRQn);
//// EnableIRQ(ENET_1G_MAC0_Tx_Rx_2_IRQn);
////#else
//// config.miiMode = kENET_RmiiMode;
////#endif
//
//
// config.interrupt |= kENET_TxFrameInterrupt | kENET_RxFrameInterrupt;
// config.callback = _enet_callback;
//
//// ENET_GetDefaultConfig(&config);
// config.ringNum = ENET_RING_NUM;
//// config.interrupt = kENET_TxFrameInterrupt | kENET_RxFrameInterrupt;
// config.miiSpeed = imxrt_eth_device.speed;
// config.miiDuplex = imxrt_eth_device.duplex;
//
// /* Set SMI to get PHY link status. */
// sysClock = CLOCK_GetFreq(kCLOCK_IpgClk);
//
// dbg_log(DBG_LOG, "deinit\n");
// ENET_Deinit(imxrt_eth_device.enet_base);
// dbg_log(DBG_LOG, "init\n");
// ENET_Init(imxrt_eth_device.enet_base, &imxrt_eth_device.enet_handle, &config, &buffConfig[0], &imxrt_eth_device.dev_addr[0], sysClock);
//// dbg_log(DBG_LOG, "set call back\n");
//// ENET_SetCallback(&imxrt_eth_device.enet_handle, _enet_callback, &imxrt_eth_device);
// dbg_log(DBG_LOG, "active read\n");
// ENET_ActiveRead(imxrt_eth_device.enet_base);
//#else
int i;
enet_buffer_config_t buffConfig[ENET_RING_NUM];
imxrt_eth_device.RxBuffDescrip = &g_rxBuffDescrip[0];
imxrt_eth_device.TxBuffDescrip = &g_txBuffDescrip[0];
imxrt_eth_device.RxDataBuff = &g_rxDataBuff[0];
imxrt_eth_device.TxDataBuff = &g_txDataBuff[0];
buffConfig[0].rxBdNumber = ENET_RXBD_NUM; /* Receive buffer descriptor number. */
buffConfig[0].txBdNumber = ENET_TXBD_NUM; /* Transmit buffer descriptor number. */
buffConfig[0].rxBuffSizeAlign = sizeof(rx_buffer_t); /* Aligned receive data buffer size. */
buffConfig[0].txBuffSizeAlign = sizeof(tx_buffer_t); /* Aligned transmit data buffer size. */
buffConfig[0].rxBdStartAddrAlign =
&(imxrt_eth_device.RxBuffDescrip[0]); /* Aligned receive buffer descriptor start address. */
buffConfig[0].txBdStartAddrAlign =
&(imxrt_eth_device.TxBuffDescrip[0]); /* Aligned transmit buffer descriptor start address. */
buffConfig[0].rxBufferAlign =
NULL; /* Receive data buffer start address. NULL when buffers are allocated by callback for RX zero-copy. */
buffConfig[0].txBufferAlign = &(imxrt_eth_device.TxDataBuff[0][0]); /* Transmit data buffer start address. */
buffConfig[0].txFrameInfo = NULL; /* Transmit frame information start address. Set only if using zero-copy transmit. */
buffConfig[0].rxMaintainEnable = true; /* Receive buffer cache maintain. */
buffConfig[0].txMaintainEnable = true; /* Transmit buffer cache maintain. */
/* Get default configuration. */
/*
* config.miiMode = kENET_RmiiMode;
* config.miiSpeed = kENET_MiiSpeed100M;
* config.miiDuplex = kENET_MiiFullDuplex;
* config.rxMaxFrameLen = ENET_FRAME_MAX_FRAMELEN;
*/
ENET_GetDefaultConfig(&config);
config.ringNum = ENET_RING_NUM;
config.miiSpeed = imxrt_eth_device.speed;
config.miiDuplex = imxrt_eth_device.duplex;
#ifdef PHY_USING_RTL8211F
config.miiMode = kENET_RgmiiMode;
EnableIRQ(ENET_1G_MAC0_Tx_Rx_1_IRQn);
EnableIRQ(ENET_1G_MAC0_Tx_Rx_2_IRQn);
#else
config.miiMode = kENET_RmiiMode;
#endif
config.rxBuffAlloc = _enet_rx_alloc;
config.rxBuffFree = _enet_rx_free;
config.userData = &imxrt_eth_device;
#ifdef SOC_IMXRT1170_SERIES
/* Set SMI to get PHY link status. */
sysClock = CLOCK_GetRootClockFreq(kCLOCK_Root_Bus);
#else
sysClock = CLOCK_GetFreq(kCLOCK_IpgClk);
#endif
config.interrupt |= kENET_TxFrameInterrupt | kENET_RxFrameInterrupt | kENET_TxBufferInterrupt | kENET_LateCollisionInterrupt;
config.callback = _enet_callback;
for (i = 0; i < ENET_RXBUFF_NUM; i++)
{
imxrt_eth_device.RxPbufs[i].p.custom_free_function = _enet_rx_release;
imxrt_eth_device.RxPbufs[i].buffer = &(imxrt_eth_device.RxDataBuff[i][0]);
imxrt_eth_device.RxPbufs[i].buffer_used = false;
}
// dbg_log(DBG_LOG, "deinit\n");
// ENET_Deinit(imxrt_eth_device.enet_base);
dbg_log(DBG_LOG, "init\n");
ENET_Init(imxrt_eth_device.enet_base, &imxrt_eth_device.enet_handle, &config, &buffConfig[0], &imxrt_eth_device.dev_addr[0], sysClock);
// dbg_log(DBG_LOG, "set call back\n");
// ENET_SetCallback(&imxrt_eth_device.enet_handle, _enet_callback, &imxrt_eth_device);
dbg_log(DBG_LOG, "active read\n");
ENET_ActiveRead(imxrt_eth_device.enet_base);
//#endif
}
#if defined(ETH_RX_DUMP) || defined(ETH_TX_DUMP)
static void packet_dump(const char *msg, const struct pbuf *p)
{
const struct pbuf *q;
rt_uint32_t i, j;
rt_uint8_t *ptr;
rt_kprintf("%s %d byte\n", msg, p->tot_len);
i = 0;
for (q = p; q != RT_NULL; q = q->next)
{
ptr = q->payload;
for (j = 0; j < q->len; j++)
{
if ((i % 8) == 0)
{
rt_kprintf(" ");
}
if ((i % 16) == 0)
{
rt_kprintf("\r\n");
}
rt_kprintf("%02x ", *ptr);
i++;
ptr++;
}
}
rt_kprintf("\n\n");
}
#else
#define packet_dump(...)
#endif /* dump */
/* initialize the interface */
static rt_err_t rt_imxrt_eth_init(rt_device_t dev)
{
dbg_log(DBG_LOG, "rt_imxrt_eth_init...\n");
_enet_config();
return RT_EOK;
}
static rt_err_t rt_imxrt_eth_open(rt_device_t dev, rt_uint16_t oflag)
{
dbg_log(DBG_LOG, "rt_imxrt_eth_open...\n");
return RT_EOK;
}
static rt_err_t rt_imxrt_eth_close(rt_device_t dev)
{
dbg_log(DBG_LOG, "rt_imxrt_eth_close...\n");
return RT_EOK;
}
static rt_ssize_t rt_imxrt_eth_read(rt_device_t dev, rt_off_t pos, void *buffer, rt_size_t size)
{
dbg_log(DBG_LOG, "rt_imxrt_eth_read...\n");
rt_set_errno(-RT_ENOSYS);
return 0;
}
static rt_ssize_t rt_imxrt_eth_write(rt_device_t dev, rt_off_t pos, const void *buffer, rt_size_t size)
{
dbg_log(DBG_LOG, "rt_imxrt_eth_write...\n");
rt_set_errno(-RT_ENOSYS);
return 0;
}
static rt_err_t rt_imxrt_eth_control(rt_device_t dev, int cmd, void *args)
{
dbg_log(DBG_LOG, "rt_imxrt_eth_control...\n");
switch (cmd)
{
case NIOCTL_GADDR:
/* get mac address */
if (args)
rt_memcpy(args, imxrt_eth_device.dev_addr, 6);
else
return -RT_ERROR;
break;
default:
break;
}
return RT_EOK;
}
static bool _ENET_TxDirtyRingAvailable(enet_tx_dirty_ring_t *txDirtyRing)
{
return !txDirtyRing->isFull;
}
static uint16_t _ENET_IncreaseIndex(uint16_t index, uint16_t max)
{
assert(index < max);
/* Increase the index. */
index++;
if (index >= max)
{
index = 0;
}
return index;
}
static void _ENET_ActiveSendRing(ENET_Type *base, uint8_t ringId)
{
assert(ringId < (uint8_t)FSL_FEATURE_ENET_INSTANCE_QUEUEn(base));
volatile uint32_t *txDesActive = NULL;
/* Ensure previous data update is completed with Data Synchronization Barrier before activing Tx BD. */
__DSB();
switch (ringId)
{
case 0:
txDesActive = &(base->TDAR);
break;
#if FSL_FEATURE_ENET_QUEUE > 1
case 1:
txDesActive = &(base->TDAR1);
break;
case 2:
txDesActive = &(base->TDAR2);
break;
#endif /* FSL_FEATURE_ENET_QUEUE > 1 */
default:
txDesActive = &(base->TDAR);
break;
}
#if defined(FSL_FEATURE_ENET_HAS_ERRATA_007885) && FSL_FEATURE_ENET_HAS_ERRATA_007885
/* There is a TDAR race condition for mutliQ when the software sets TDAR
* and the UDMA clears TDAR simultaneously or in a small window (2-4 cycles).
* This will cause the udma_tx and udma_tx_arbiter state machines to hang.
* Software workaround: introduces a delay by reading the relevant ENET_TDARn_TDAR 4 times
*/
for (uint8_t i = 0; i < 4U; i++)
{
if (*txDesActive == 0U)
{
break;
}
}
#endif
/* Write to active tx descriptor */
*txDesActive = 0;
}
static status_t _ENET_SendFrame(ENET_Type *base,
enet_handle_t *handle,
const uint8_t *data,
uint32_t length,
uint8_t ringId,
bool tsFlag,
void *context)
{
assert(handle != NULL);
assert(data != NULL);
assert(FSL_FEATURE_ENET_INSTANCE_QUEUEn(base) != -1);
assert(ringId < (uint8_t)FSL_FEATURE_ENET_INSTANCE_QUEUEn(base));
volatile enet_tx_bd_struct_t *curBuffDescrip;
enet_tx_bd_ring_t *txBdRing = &handle->txBdRing[ringId];
enet_tx_dirty_ring_t *txDirtyRing = &handle->txDirtyRing[ringId];
enet_frame_info_t *txDirty = NULL;
uint32_t len = 0;
uint32_t sizeleft = 0;
uint32_t address;
status_t result = kStatus_Success;
uint32_t src;
uint32_t configVal;
bool isReturn = false;
uint32_t primask;
/* Check the frame length. */
if (length > ENET_FRAME_TX_LEN_LIMITATION(base))
{
result = kStatus_ENET_TxFrameOverLen;
}
else
{
/* Check if the transmit buffer is ready. */
curBuffDescrip = txBdRing->txBdBase + txBdRing->txGenIdx;
if (0U != (curBuffDescrip->control & ENET_BUFFDESCRIPTOR_TX_READY_MASK))
{
result = kStatus_ENET_TxFrameBusy;
}
/* Check txDirtyRing if need frameinfo in tx interrupt callback. */
else if ((handle->txReclaimEnable[ringId]) && !_ENET_TxDirtyRingAvailable(txDirtyRing))
{
result = kStatus_ENET_TxFrameBusy;
}
else
{
/* One transmit buffer is enough for one frame. */
if (handle->txBuffSizeAlign[ringId] >= length)
{
/* Copy data to the buffer for uDMA transfer. */
#if defined(FSL_FEATURE_MEMORY_HAS_ADDRESS_OFFSET) && FSL_FEATURE_MEMORY_HAS_ADDRESS_OFFSET
address = MEMORY_ConvertMemoryMapAddress((uint32_t)curBuffDescrip->buffer, kMEMORY_DMA2Local);
#else
address = (uint32_t)curBuffDescrip->buffer;
#endif /* FSL_FEATURE_MEMORY_HAS_ADDRESS_OFFSET */
pbuf_copy_partial((const struct pbuf *)data, (void *)address, length, 0);
#if defined(FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL) && FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL
if (handle->txMaintainEnable[ringId])
{
DCACHE_CleanByRange(address, length);
}
#endif /* FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL */
/* Set data length. */
curBuffDescrip->length = (uint16_t)length;
#ifdef ENET_ENHANCEDBUFFERDESCRIPTOR_MODE
/* For enable the timestamp. */
if (tsFlag)
{
curBuffDescrip->controlExtend1 |= ENET_BUFFDESCRIPTOR_TX_TIMESTAMP_MASK;
}
else
{
curBuffDescrip->controlExtend1 &= (uint16_t)(~ENET_BUFFDESCRIPTOR_TX_TIMESTAMP_MASK);
}
#endif /* ENET_ENHANCEDBUFFERDESCRIPTOR_MODE */
curBuffDescrip->control |= (ENET_BUFFDESCRIPTOR_TX_READY_MASK | ENET_BUFFDESCRIPTOR_TX_LAST_MASK);
/* Increase the buffer descriptor address. */
txBdRing->txGenIdx = _ENET_IncreaseIndex(txBdRing->txGenIdx, txBdRing->txRingLen);
/* Add context to frame info ring */
if (handle->txReclaimEnable[ringId])
{
txDirty = txDirtyRing->txDirtyBase + txDirtyRing->txGenIdx;
txDirty->context = context;
txDirtyRing->txGenIdx = _ENET_IncreaseIndex(txDirtyRing->txGenIdx, txDirtyRing->txRingLen);
if (txDirtyRing->txGenIdx == txDirtyRing->txConsumIdx)
{
txDirtyRing->isFull = true;
}
primask = DisableGlobalIRQ();
txBdRing->txDescUsed++;
EnableGlobalIRQ(primask);
}
/* Active the transmit buffer descriptor. */
_ENET_ActiveSendRing(base, ringId);
}
else
{
/* One frame requires more than one transmit buffers. */
do
{
#ifdef ENET_ENHANCEDBUFFERDESCRIPTOR_MODE
/* For enable the timestamp. */
if (tsFlag)
{
curBuffDescrip->controlExtend1 |= ENET_BUFFDESCRIPTOR_TX_TIMESTAMP_MASK;
}
else
{
curBuffDescrip->controlExtend1 &= (uint16_t)(~ENET_BUFFDESCRIPTOR_TX_TIMESTAMP_MASK);
}
#endif /* ENET_ENHANCEDBUFFERDESCRIPTOR_MODE */
/* Update the size left to be transmit. */
sizeleft = length - len;
#if defined(FSL_FEATURE_MEMORY_HAS_ADDRESS_OFFSET) && FSL_FEATURE_MEMORY_HAS_ADDRESS_OFFSET
address = MEMORY_ConvertMemoryMapAddress((uint32_t)curBuffDescrip->buffer, kMEMORY_DMA2Local);
#else
address = (uint32_t)curBuffDescrip->buffer;
#endif /* FSL_FEATURE_MEMORY_HAS_ADDRESS_OFFSET */
src = (uint32_t)data + len;
/* Increase the current software index of BD */
txBdRing->txGenIdx = _ENET_IncreaseIndex(txBdRing->txGenIdx, txBdRing->txRingLen);
if (sizeleft > handle->txBuffSizeAlign[ringId])
{
/* Data copy. */
(void)memcpy((void *)(uint32_t *)address, (void *)(uint32_t *)src,
handle->txBuffSizeAlign[ringId]);
#if defined(FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL) && FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL
if (handle->txMaintainEnable[ringId])
{
/* Add the cache clean maintain. */
DCACHE_CleanByRange(address, handle->txBuffSizeAlign[ringId]);
}
#endif /* FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL */
/* Data length update. */
curBuffDescrip->length = handle->txBuffSizeAlign[ringId];
len += handle->txBuffSizeAlign[ringId];
/* Sets the control flag. */
configVal = (uint32_t)curBuffDescrip->control;
configVal &= ~ENET_BUFFDESCRIPTOR_TX_LAST_MASK;
configVal |= ENET_BUFFDESCRIPTOR_TX_READY_MASK;
curBuffDescrip->control = (uint16_t)configVal;
if (handle->txReclaimEnable[ringId])
{
primask = DisableGlobalIRQ();
txBdRing->txDescUsed++;
EnableGlobalIRQ(primask);
}
/* Active the transmit buffer descriptor*/
_ENET_ActiveSendRing(base, ringId);
}
else
{
(void)memcpy((void *)(uint32_t *)address, (void *)(uint32_t *)src, sizeleft);
#if defined(FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL) && FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL
if (handle->txMaintainEnable[ringId])
{
/* Add the cache clean maintain. */
DCACHE_CleanByRange(address, sizeleft);
}
#endif /* FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL */
curBuffDescrip->length = (uint16_t)sizeleft;
/* Set Last buffer wrap flag. */
curBuffDescrip->control |= ENET_BUFFDESCRIPTOR_TX_READY_MASK | ENET_BUFFDESCRIPTOR_TX_LAST_MASK;
if (handle->txReclaimEnable[ringId])
{
/* Add context to frame info ring */
txDirty = txDirtyRing->txDirtyBase + txDirtyRing->txGenIdx;
txDirty->context = context;
txDirtyRing->txGenIdx = _ENET_IncreaseIndex(txDirtyRing->txGenIdx, txDirtyRing->txRingLen);
if (txDirtyRing->txGenIdx == txDirtyRing->txConsumIdx)
{
txDirtyRing->isFull = true;
}
primask = DisableGlobalIRQ();
txBdRing->txDescUsed++;
EnableGlobalIRQ(primask);
}
/* Active the transmit buffer descriptor. */
_ENET_ActiveSendRing(base, ringId);
isReturn = true;
break;
}
/* Update the buffer descriptor address. */
curBuffDescrip = txBdRing->txBdBase + txBdRing->txGenIdx;
} while (0U == (curBuffDescrip->control & ENET_BUFFDESCRIPTOR_TX_READY_MASK));
if (isReturn == false)
{
result = kStatus_ENET_TxFrameBusy;
}
}
}
}
return result;
}
/* ethernet device interface */
/* transmit packet. */
rt_err_t rt_imxrt_eth_tx(rt_device_t dev, struct pbuf *p)
{
rt_err_t result = RT_EOK;
enet_handle_t *enet_handle = &imxrt_eth_device.enet_handle;
RT_ASSERT(p != NULL);
RT_ASSERT(enet_handle != RT_NULL);
dbg_log(DBG_LOG, "rt_imxrt_eth_tx: %d\n", p->len);
#ifdef ETH_TX_DUMP
packet_dump("send", p);
#endif
do
{
result = _ENET_SendFrame(imxrt_eth_device.enet_base, enet_handle, (const uint8_t *)p, p->tot_len, RING_ID, false, NULL);
if (result == kStatus_ENET_TxFrameBusy)
{
imxrt_eth_device.tx_is_waiting = RT_TRUE;
rt_sem_take(&imxrt_eth_device.tx_wait, RT_WAITING_FOREVER);
}
} while (result == kStatus_ENET_TxFrameBusy);
return RT_EOK;
}
/* reception packet. */
struct pbuf *rt_imxrt_eth_rx(rt_device_t dev)
{
uint32_t length = 0;
status_t status;
struct pbuf *p = RT_NULL;
enet_handle_t *enet_handle = &imxrt_eth_device.enet_handle;
ENET_Type *enet_base = imxrt_eth_device.enet_base;
enet_data_error_stats_t *error_statistic = &imxrt_eth_device.error_statistic;
/* Get the Frame size */
status = ENET_GetRxFrameSize(enet_handle, &length, RING_ID);
/* Call ENET_ReadFrame when there is a received frame. */
if (length != 0)
{
/* Received valid frame. Deliver the rx buffer with the size equal to length. */
p = pbuf_alloc(PBUF_RAW, length, PBUF_POOL);
if (p != NULL)
{
status = ENET_ReadFrame(enet_base, enet_handle, p->payload, length, RING_ID, NULL);
if (status == kStatus_Success)
{
#ifdef ETH_RX_DUMP
packet_dump("recv", p);
#endif
return p;
}
else
{
dbg_log(DBG_LOG, " A frame read failed\n");
pbuf_free(p);
}
}
else
{
dbg_log(DBG_LOG, " pbuf_alloc faild\n");
}
}
else if (status == kStatus_ENET_RxFrameError)
{
dbg_log(DBG_WARNING, "ENET_GetRxFrameSize: kStatus_ENET_RxFrameError\n");
/* Update the received buffer when error happened. */
/* Get the error information of the received g_frame. */
ENET_GetRxErrBeforeReadFrame(enet_handle, error_statistic, RING_ID);
/* update the receive buffer. */
ENET_ReadFrame(enet_base, enet_handle, NULL, 0, RING_ID, NULL);
}
ENET_EnableInterrupts(enet_base, kENET_RxFrameInterrupt);
return NULL;
}
#ifdef BSP_USING_PHY
static struct rt_phy_device *phy_dev = RT_NULL;
static void phy_monitor_thread_entry(void *parameter)
{
rt_uint32_t speed;
rt_uint32_t duplex;
rt_bool_t link = RT_FALSE;
#ifdef SOC_IMXRT1170_SERIES
#ifdef PHY_USING_RTL8211F
phy_dev = (struct rt_phy_device *)rt_device_find("rtl8211f");
if ((RT_NULL == phy_dev) || (RT_NULL == phy_dev->ops))
{
// TODO print warning information
LOG_E("Can not find phy device called \"rtl8211f\"");
return;
}
#else
phy_dev = (struct rt_phy_device *)rt_device_find("ksz8081");
if ((RT_NULL == phy_dev) || (RT_NULL == phy_dev->ops))
{
// TODO print warning information
LOG_E("Can not find phy device called \"ksz8081\"");
return;
}
#endif
#else
phy_dev = (struct rt_phy_device *)rt_device_find("ksz8081");
if ((RT_NULL == phy_dev) || (RT_NULL == phy_dev->ops))
{
// TODO print warning information
LOG_E("Can not find phy device called \"rtt-phy\"");
return;
}
#endif
if (RT_NULL == phy_dev->ops->init)
{
LOG_E("phy driver error!");
return;
}
#ifdef SOC_IMXRT1170_SERIES
#ifdef PHY_USING_RTL8211F
rt_phy_status status = phy_dev->ops->init(imxrt_eth_device.enet_base, PHY_RTL8211F_ADDRESS, CLOCK_GetRootClockFreq(kCLOCK_Root_Bus));
#else
rt_phy_status status = phy_dev->ops->init(imxrt_eth_device.enet_base, PHY_KSZ8081_ADDRESS, CLOCK_GetRootClockFreq(kCLOCK_Root_Bus));
#endif
#else
rt_phy_status status = phy_dev->ops->init(imxrt_eth_device.enet_base, PHY_KSZ8081_ADDRESS, CLOCK_GetFreq(kCLOCK_IpgClk));
#endif
if (PHY_STATUS_OK != status)
{
LOG_E("Phy device initialize unsuccessful!\n");
return;
}
LOG_I("Phy device initialize successfully!\n");
while (1)
{
rt_bool_t new_link = RT_FALSE;
rt_phy_status status = phy_dev->ops->get_link_status(&new_link);
if ((PHY_STATUS_OK == status) && (link != new_link))
{
link = new_link;
if (link) // link up
{
phy_dev->ops->get_link_speed_duplex(&speed, &duplex);
if (PHY_SPEED_10M == speed)
{
dbg_log(DBG_LOG, "10M\n");
}
else if (PHY_SPEED_100M == speed)
{
dbg_log(DBG_LOG, "100M\n");
}
else
{
dbg_log(DBG_LOG, "1000M\n");
}
if (PHY_HALF_DUPLEX == duplex)
{
dbg_log(DBG_LOG, "half dumplex\n");
}
else
{
dbg_log(DBG_LOG, "full dumplex\n");
}
if ((imxrt_eth_device.speed != (enet_mii_speed_t)speed) || (imxrt_eth_device.duplex != (enet_mii_duplex_t)duplex))
{
imxrt_eth_device.speed = (enet_mii_speed_t)speed;
imxrt_eth_device.duplex = (enet_mii_duplex_t)duplex;
dbg_log(DBG_LOG, "link up, and update eth mode.\n");
rt_imxrt_eth_init((rt_device_t)&imxrt_eth_device);
}
else
{
dbg_log(DBG_LOG, "link up, eth not need re-config.\n");
}
dbg_log(DBG_LOG, "link up.\n");
eth_device_linkchange(&imxrt_eth_device.parent, RT_TRUE);
}
else
{
dbg_log(DBG_LOG, "link down.\n");
eth_device_linkchange(&imxrt_eth_device.parent, RT_FALSE);
}
}
rt_thread_delay(RT_TICK_PER_SECOND * 2);
// rt_thread_mdelay(300);
}
}
#endif
static int rt_hw_imxrt_eth_init(void)
{
rt_err_t state;
_enet_clk_init();
#ifdef PHY_USING_RTL8211F
/* NXP (Freescale) MAC OUI */
imxrt_eth_device.dev_addr[0] = 0x54;
imxrt_eth_device.dev_addr[1] = 0x27;
imxrt_eth_device.dev_addr[2] = 0x8d;
/* generate MAC addr from 96bit unique ID (only for test). */
imxrt_eth_device.dev_addr[3] = 0x11;
imxrt_eth_device.dev_addr[4] = 0x22;
imxrt_eth_device.dev_addr[5] = 0x33;
imxrt_eth_device.speed = kENET_MiiSpeed100M;//要支持千兆直接赋值为kENET_MiiSpeed1000M
imxrt_eth_device.duplex = kENET_MiiFullDuplex;
imxrt_eth_device.enet_base = ENET_1G;
#else
/* NXP (Freescale) MAC OUI */
imxrt_eth_device.dev_addr[0] = 0x54;
imxrt_eth_device.dev_addr[1] = 0x27;
imxrt_eth_device.dev_addr[2] = 0x8d;
/* generate MAC addr from 96bit unique ID (only for test). */
imxrt_eth_device.dev_addr[3] = 0x00;
imxrt_eth_device.dev_addr[4] = 0x00;
imxrt_eth_device.dev_addr[5] = 0x00;
imxrt_eth_device.speed = kENET_MiiSpeed100M;
imxrt_eth_device.duplex = kENET_MiiFullDuplex;
imxrt_eth_device.enet_base = ENET;
#endif
imxrt_eth_device.parent.parent.init = rt_imxrt_eth_init;
imxrt_eth_device.parent.parent.open = rt_imxrt_eth_open;
imxrt_eth_device.parent.parent.close = rt_imxrt_eth_close;
imxrt_eth_device.parent.parent.read = rt_imxrt_eth_read;
imxrt_eth_device.parent.parent.write = rt_imxrt_eth_write;
imxrt_eth_device.parent.parent.control = rt_imxrt_eth_control;
imxrt_eth_device.parent.parent.user_data = RT_NULL;
imxrt_eth_device.parent.eth_rx = rt_imxrt_eth_rx;
imxrt_eth_device.parent.eth_tx = rt_imxrt_eth_tx;
dbg_log(DBG_LOG, "sem init: tx_wait\r\n");
/* init tx semaphore */
rt_sem_init(&imxrt_eth_device.tx_wait, "tx_wait", 0, RT_IPC_FLAG_FIFO);
dbg_log(DBG_LOG, "sem init: buff_wait\r\n");
/* init tx semaphore */
rt_sem_init(&imxrt_eth_device.buff_wait, "buff_wait", 1, RT_IPC_FLAG_FIFO);
/* register eth device */
dbg_log(DBG_LOG, "eth_device_init start\r\n");
state = eth_device_init(&(imxrt_eth_device.parent), "e0");
if (RT_EOK == state)
{
dbg_log(DBG_LOG, "eth_device_init success\r\n");
}
else
{
dbg_log(DBG_LOG, "eth_device_init faild: %d\r\n", state);
}
eth_device_linkchange(&imxrt_eth_device.parent, RT_FALSE);
/* start phy monitor */
{
#ifdef BSP_USING_PHY
rt_thread_t tid;
tid = rt_thread_create("phy",
phy_monitor_thread_entry,
RT_NULL,
4096,
/*RT_THREAD_PRIORITY_MAX - 2,*/
15,
2);
if (tid != RT_NULL)
rt_thread_startup(tid);
#endif
}
return state;
}
INIT_DEVICE_EXPORT(rt_hw_imxrt_eth_init);
#endif
#if defined(RT_USING_FINSH) && defined(RT_USING_PHY)
#include <finsh.h>
void phy_read(rt_uint32_t phy_reg)
{
rt_uint32_t data;
rt_phy_status status = phy_dev->ops->read(phy_reg, &data);
if (PHY_STATUS_OK == status)
{
rt_kprintf("PHY_Read: %02X --> %08X", phy_reg, data);
}
else
{
rt_kprintf("PHY_Read: %02X --> faild", phy_reg);
}
}
void phy_write(rt_uint32_t phy_reg, rt_uint32_t data)
{
rt_phy_status status = phy_dev->ops->write(phy_reg, data);
if (PHY_STATUS_OK == status)
{
rt_kprintf("PHY_Write: %02X --> %08X\n", phy_reg, data);
}
else
{
rt_kprintf("PHY_Write: %02X --> faild\n", phy_reg);
}
}
void phy_dump(void)
{
rt_uint32_t data;
rt_phy_status status;
int i;
for (i = 0; i < 32; i++)
{
status = phy_dev->ops->read(i, &data);
if (PHY_STATUS_OK != status)
{
rt_kprintf("phy_dump: %02X --> faild", i);
break;
}
if (i % 8 == 7)
{
rt_kprintf("%02X --> %08X ", i, data);
}
else
{
rt_kprintf("%02X --> %08X\n", i, data);
}
}
}
#endif
#if defined(RT_USING_FINSH) && defined(RT_USING_LWIP)
void enet_reg_dump(void)
{
ENET_Type *enet_base = imxrt_eth_device.enet_base;
#define DUMP_REG(__REG) \
rt_kprintf("%s(%08X): %08X\n", #__REG, (uint32_t)&enet_base->__REG, enet_base->__REG)
DUMP_REG(EIR);
DUMP_REG(EIMR);
DUMP_REG(RDAR);
DUMP_REG(TDAR);
DUMP_REG(ECR);
DUMP_REG(MMFR);
DUMP_REG(MSCR);
DUMP_REG(MIBC);
DUMP_REG(RCR);
DUMP_REG(TCR);
DUMP_REG(PALR);
DUMP_REG(PAUR);
DUMP_REG(OPD);
DUMP_REG(TXIC);
DUMP_REG(RXIC);
DUMP_REG(IAUR);
DUMP_REG(IALR);
DUMP_REG(GAUR);
DUMP_REG(GALR);
DUMP_REG(TFWR);
DUMP_REG(RDSR);
DUMP_REG(TDSR);
DUMP_REG(MRBR);
DUMP_REG(RSFL);
DUMP_REG(RSEM);
DUMP_REG(RAEM);
DUMP_REG(RAFL);
DUMP_REG(TSEM);
DUMP_REG(TAEM);
DUMP_REG(TAFL);
DUMP_REG(TIPG);
DUMP_REG(FTRL);
DUMP_REG(TACC);
DUMP_REG(RACC);
// DUMP_REG(RMON_T_DROP);
DUMP_REG(RMON_T_PACKETS);
DUMP_REG(RMON_T_BC_PKT);
DUMP_REG(RMON_T_MC_PKT);
DUMP_REG(RMON_T_CRC_ALIGN);
DUMP_REG(RMON_T_UNDERSIZE);
DUMP_REG(RMON_T_OVERSIZE);
DUMP_REG(RMON_T_FRAG);
DUMP_REG(RMON_T_JAB);
DUMP_REG(RMON_T_COL);
DUMP_REG(RMON_T_P64);
DUMP_REG(RMON_T_P65TO127);
DUMP_REG(RMON_T_P128TO255);
DUMP_REG(RMON_T_P256TO511);
DUMP_REG(RMON_T_P512TO1023);
DUMP_REG(RMON_T_P1024TO2047);
DUMP_REG(RMON_T_P_GTE2048);
DUMP_REG(RMON_T_OCTETS);
// DUMP_REG(IEEE_T_DROP);
DUMP_REG(IEEE_T_FRAME_OK);
DUMP_REG(IEEE_T_1COL);
DUMP_REG(IEEE_T_MCOL);
DUMP_REG(IEEE_T_DEF);
DUMP_REG(IEEE_T_LCOL);
DUMP_REG(IEEE_T_EXCOL);
DUMP_REG(IEEE_T_MACERR);
DUMP_REG(IEEE_T_CSERR);
DUMP_REG(IEEE_T_SQE);
DUMP_REG(IEEE_T_FDXFC);
DUMP_REG(IEEE_T_OCTETS_OK);
DUMP_REG(RMON_R_PACKETS);
DUMP_REG(RMON_R_BC_PKT);
DUMP_REG(RMON_R_MC_PKT);
DUMP_REG(RMON_R_CRC_ALIGN);
DUMP_REG(RMON_R_UNDERSIZE);
DUMP_REG(RMON_R_OVERSIZE);
DUMP_REG(RMON_R_FRAG);
DUMP_REG(RMON_R_JAB);
// DUMP_REG(RMON_R_RESVD_0);
DUMP_REG(RMON_R_P64);
DUMP_REG(RMON_R_P65TO127);
DUMP_REG(RMON_R_P128TO255);
DUMP_REG(RMON_R_P256TO511);
DUMP_REG(RMON_R_P512TO1023);
DUMP_REG(RMON_R_P1024TO2047);
DUMP_REG(RMON_R_P_GTE2048);
DUMP_REG(RMON_R_OCTETS);
DUMP_REG(IEEE_R_DROP);
DUMP_REG(IEEE_R_FRAME_OK);
DUMP_REG(IEEE_R_CRC);
DUMP_REG(IEEE_R_ALIGN);
DUMP_REG(IEEE_R_MACERR);
DUMP_REG(IEEE_R_FDXFC);
DUMP_REG(IEEE_R_OCTETS_OK);
DUMP_REG(ATCR);
DUMP_REG(ATVR);
DUMP_REG(ATOFF);
DUMP_REG(ATPER);
DUMP_REG(ATCOR);
DUMP_REG(ATINC);
DUMP_REG(ATSTMP);
DUMP_REG(TGSR);
}
void enet_nvic_tog(void)
{
NVIC_SetPendingIRQ(ENET_IRQn);
}
void enet_rx_stat(void)
{
enet_data_error_stats_t *error_statistic = &imxrt_eth_device.error_statistic;
#define DUMP_STAT(__VAR) \
rt_kprintf("%-25s: %08X\n", #__VAR, error_statistic->__VAR);
DUMP_STAT(statsRxLenGreaterErr);
DUMP_STAT(statsRxAlignErr);
DUMP_STAT(statsRxFcsErr);
DUMP_STAT(statsRxOverRunErr);
DUMP_STAT(statsRxTruncateErr);
#ifdef ENET_ENHANCEDBUFFERDESCRIPTOR_MODE
DUMP_STAT(statsRxProtocolChecksumErr);
DUMP_STAT(statsRxIpHeadChecksumErr);
DUMP_STAT(statsRxMacErr);
DUMP_STAT(statsRxPhyErr);
DUMP_STAT(statsRxCollisionErr);
DUMP_STAT(statsTxErr);
DUMP_STAT(statsTxFrameErr);
DUMP_STAT(statsTxOverFlowErr);
DUMP_STAT(statsTxLateCollisionErr);
DUMP_STAT(statsTxExcessCollisionErr);
DUMP_STAT(statsTxUnderFlowErr);
DUMP_STAT(statsTxTsErr);
#endif
}
void enet_buf_info(void)
{
int i = 0;
for (i = 0; i < ENET_RXBD_NUM; i++)
{
rt_kprintf("%d: length: %-8d, control: %04X, buffer:%p\n",
i,
g_rxBuffDescrip[i].length,
g_rxBuffDescrip[i].control,
g_rxBuffDescrip[i].buffer);
}
for (i = 0; i < ENET_TXBD_NUM; i++)
{
rt_kprintf("%d: length: %-8d, control: %04X, buffer:%p\n",
i,
g_txBuffDescrip[i].length,
g_txBuffDescrip[i].control,
g_txBuffDescrip[i].buffer);
}
}
FINSH_FUNCTION_EXPORT(phy_read, read phy register);
FINSH_FUNCTION_EXPORT(phy_write, write phy register);
FINSH_FUNCTION_EXPORT(phy_dump, dump phy registers);
FINSH_FUNCTION_EXPORT(enet_reg_dump, dump enet registers);
FINSH_FUNCTION_EXPORT(enet_nvic_tog, toggle enet nvic pendding bit);
FINSH_FUNCTION_EXPORT(enet_rx_stat, dump enet rx statistic);
FINSH_FUNCTION_EXPORT(enet_buf_info, dump enet tx and tx buffer descripter);
#endif