rt-thread-official/bsp/lpc54114-lite/Libraries/devices/LPC54114/system_LPC54114_cm0plus.c

367 lines
12 KiB
C

/*
** ###################################################################
** Processors: LPC54114J256BD64_cm0plus
** LPC54114J256UK49_cm0plus
**
** Compilers: Keil ARM C/C++ Compiler
** GNU C Compiler
** IAR ANSI C/C++ Compiler for ARM
** MCUXpresso Compiler
**
** Reference manual: LPC5411x User manual Rev. 1.1 25 May 2016
** Version: rev. 1.0, 2016-04-29
** Build: b161227
**
** Abstract:
** Provides a system configuration function and a global variable that
** contains the system frequency. It configures the device and initializes
** the oscillator (PLL) that is part of the microcontroller device.
**
** The Clear BSD License
** Copyright (c) 2016 Freescale Semiconductor, Inc.
** Copyright 2016 - 2017 NXP
** All rights reserved.
**
** Redistribution and use in source and binary forms, with or without modification,
** are permitted (subject to the limitations in the disclaimer below) provided
** that the following conditions are met:
**
** o Redistributions of source code must retain the above copyright notice, this list
** of conditions and the following disclaimer.
**
** o Redistributions in binary form must reproduce the above copyright notice, this
** list of conditions and the following disclaimer in the documentation and/or
** other materials provided with the distribution.
**
** o Neither the name of the copyright holder nor the names of its
** contributors may be used to endorse or promote products derived from this
** software without specific prior written permission.
**
** NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED BY THIS LICENSE.
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
**
** http: www.nxp.com
** mail: support@nxp.com
**
** Revisions:
** - rev. 1.0 (2016-04-29)
** Initial version.
**
** ###################################################################
*/
/*!
* @file LPC54114_cm0plus
* @version 1.0
* @date 2016-04-29
* @brief Device specific configuration file for LPC54114_cm0plus
* (implementation file)
*
* Provides a system configuration function and a global variable that contains
* the system frequency. It configures the device and initializes the oscillator
* (PLL) that is part of the microcontroller device.
*/
#include <stdint.h>
#include "fsl_device_registers.h"
#define NVALMAX (0x100)
#define PVALMAX (0x20)
#define MVALMAX (0x8000)
#define PLL_SSCG0_MDEC_VAL_P (0) /* MDEC is in bits 16 downto 0 */
#define PLL_SSCG0_MDEC_VAL_M (0x1FFFFUL << PLL_SSCG0_MDEC_VAL_P) /* NDEC is in bits 9 downto 0 */
#define PLL_NDEC_VAL_P (0) /* NDEC is in bits 9:0 */
#define PLL_NDEC_VAL_M (0x3FFUL << PLL_NDEC_VAL_P)
#define PLL_PDEC_VAL_P (0) /* PDEC is in bits 6:0 */
#define PLL_PDEC_VAL_M (0x3FFUL << PLL_PDEC_VAL_P)
extern void *__Vectors;
/* ----------------------------------------------------------------------------
-- Core clock
---------------------------------------------------------------------------- */
uint32_t SystemCoreClock = DEFAULT_SYSTEM_CLOCK;
static const uint8_t wdtFreqLookup[32] = {0, 8, 12, 15, 18, 20, 24, 26, 28, 30, 32, 34, 36, 38, 40, 41, 42, 44, 45, 46,
48, 49, 50, 52, 53, 54, 56, 57, 58, 59, 60, 61};
static uint32_t GetWdtOscFreq(void)
{
uint8_t freq_sel, div_sel;
div_sel = ((SYSCON->WDTOSCCTRL & SYSCON_WDTOSCCTRL_DIVSEL_MASK) + 1) << 1;
freq_sel = wdtFreqLookup[((SYSCON->WDTOSCCTRL & SYSCON_WDTOSCCTRL_FREQSEL_MASK) >> SYSCON_WDTOSCCTRL_FREQSEL_SHIFT)];
return ((uint32_t) freq_sel * 50000U)/((uint32_t)div_sel);
}
/* Find decoded N value for raw NDEC value */
static uint32_t pllDecodeN(uint32_t NDEC)
{
uint32_t n, x, i;
/* Find NDec */
switch (NDEC)
{
case 0xFFF:
n = 0;
break;
case 0x302:
n = 1;
break;
case 0x202:
n = 2;
break;
default:
x = 0x080;
n = 0xFFFFFFFF;
for (i = NVALMAX; ((i >= 3) && (n == 0xFFFFFFFF)); i--)
{
x = (((x ^ (x >> 2) ^ (x >> 3) ^ (x >> 4)) & 1) << 7) | ((x >> 1) & 0x7F);
if ((x & (PLL_NDEC_VAL_M >> PLL_NDEC_VAL_P)) == NDEC)
{
/* Decoded value of NDEC */
n = i;
}
}
break;
}
return n;
}
/* Find decoded P value for raw PDEC value */
static uint32_t pllDecodeP(uint32_t PDEC)
{
uint32_t p, x, i;
/* Find PDec */
switch (PDEC)
{
case 0xFF:
p = 0;
break;
case 0x62:
p = 1;
break;
case 0x42:
p = 2;
break;
default:
x = 0x10;
p = 0xFFFFFFFF;
for (i = PVALMAX; ((i >= 3) && (p == 0xFFFFFFFF)); i--)
{
x = (((x ^ (x >> 2)) & 1) << 4) | ((x >> 1) & 0xF);
if ((x & (PLL_PDEC_VAL_M >> PLL_PDEC_VAL_P)) == PDEC)
{
/* Decoded value of PDEC */
p = i;
}
}
break;
}
return p;
}
/* Find decoded M value for raw MDEC value */
static uint32_t pllDecodeM(uint32_t MDEC)
{
uint32_t m, i, x;
/* Find MDec */
switch (MDEC)
{
case 0xFFFFF:
m = 0;
break;
case 0x18003:
m = 1;
break;
case 0x10003:
m = 2;
break;
default:
x = 0x04000;
m = 0xFFFFFFFF;
for (i = MVALMAX; ((i >= 3) && (m == 0xFFFFFFFF)); i--)
{
x = (((x ^ (x >> 1)) & 1) << 14) | ((x >> 1) & 0x3FFF);
if ((x & (PLL_SSCG0_MDEC_VAL_M >> PLL_SSCG0_MDEC_VAL_P)) == MDEC)
{
/* Decoded value of MDEC */
m = i;
}
}
break;
}
return m;
}
/* Get predivider (N) from PLL NDEC setting */
static uint32_t findPllPreDiv(uint32_t ctrlReg, uint32_t nDecReg)
{
uint32_t preDiv = 1;
/* Direct input is not used? */
if ((ctrlReg & SYSCON_SYSPLLCTRL_DIRECTI_MASK) == 0)
{
/* Decode NDEC value to get (N) pre divider */
preDiv = pllDecodeN(nDecReg & 0x3FF);
if (preDiv == 0)
{
preDiv = 1;
}
}
/* Adjusted by 1, directi is used to bypass */
return preDiv;
}
/* Get postdivider (P) from PLL PDEC setting */
static uint32_t findPllPostDiv(uint32_t ctrlReg, uint32_t pDecReg)
{
uint32_t postDiv = 1;
/* Direct input is not used? */
if ((ctrlReg & SYSCON_SYSPLLCTRL_DIRECTO_MASK) == 0)
{
/* Decode PDEC value to get (P) post divider */
postDiv = 2 * pllDecodeP(pDecReg & 0x7F);
if (postDiv == 0)
{
postDiv = 2;
}
}
/* Adjusted by 1, directo is used to bypass */
return postDiv;
}
/* Get multiplier (M) from PLL MDEC and BYPASS_FBDIV2 settings */
static uint32_t findPllMMult(uint32_t ctrlReg, uint32_t mDecReg)
{
uint32_t mMult = 1;
/* Decode MDEC value to get (M) multiplier */
mMult = pllDecodeM(mDecReg & 0x1FFFF);
/* Extra multiply by 2 needed? */
if ((ctrlReg & SYSCON_SYSPLLCTRL_BYPASSCCODIV2_MASK) == 0)
{
mMult = mMult << 1;
}
if (mMult == 0)
{
mMult = 1;
}
return mMult;
}
/* ----------------------------------------------------------------------------
-- SystemInit()
---------------------------------------------------------------------------- */
void SystemInit(void)
{
SCB->VTOR = (uint32_t)&__Vectors;
SystemInitHook();
}
/* ----------------------------------------------------------------------------
-- SystemCoreClockUpdate()
---------------------------------------------------------------------------- */
void SystemCoreClockUpdate(void)
{
uint32_t clkRate = 0;
uint32_t prediv, postdiv;
uint64_t workRate;
switch (SYSCON->MAINCLKSELB & SYSCON_MAINCLKSELB_SEL_MASK)
{
case 0x00: /* MAINCLKSELA clock (main_clk_a)*/
switch (SYSCON->MAINCLKSELA & SYSCON_MAINCLKSELA_SEL_MASK)
{
case 0x00: /* FRO 12 MHz (fro_12m) */
clkRate = CLK_FRO_12MHZ;
break;
case 0x01: /* CLKIN (clk_in) */
clkRate = CLK_CLK_IN;
break;
case 0x02: /* Watchdog oscillator (wdt_clk) */
clkRate = GetWdtOscFreq();
break;
default: /* = 0x03 = FRO 96 or 48 MHz (fro_hf) */
if (SYSCON->FROCTRL & SYSCON_FROCTRL_SEL_MASK)
{
clkRate = CLK_FRO_96MHZ;
}
else
{
clkRate = CLK_FRO_48MHZ;
}
break;
}
break;
case 0x02: /* System PLL clock (pll_clk)*/
switch (SYSCON->SYSPLLCLKSEL & SYSCON_SYSPLLCLKSEL_SEL_MASK)
{
case 0x00: /* FRO 12 MHz (fro_12m) */
clkRate = CLK_FRO_12MHZ;
break;
case 0x01: /* CLKIN (clk_in) */
clkRate = CLK_CLK_IN;
break;
case 0x02: /* Watchdog oscillator (wdt_clk) */
clkRate = GetWdtOscFreq();
break;
case 0x03: /* RTC oscillator 32 kHz output (32k_clk) */
clkRate = CLK_RTC_32K_CLK;
break;
default:
break;
}
if ((SYSCON->SYSPLLCTRL & SYSCON_SYSPLLCTRL_BYPASS_MASK) == 0)
{
/* PLL is not in bypass mode, get pre-divider, post-divider, and M divider */
prediv = findPllPreDiv(SYSCON->SYSPLLCTRL, SYSCON->SYSPLLNDEC);
postdiv = findPllPostDiv(SYSCON->SYSPLLCTRL, SYSCON->SYSPLLPDEC);
/* Adjust input clock */
clkRate = clkRate / prediv;
/* If using the SS, use the multiplier */
if (SYSCON->SYSPLLSSCTRL1 & SYSCON_SYSPLLSSCTRL1_PD_MASK)
{
/* MDEC used for rate */
workRate = (uint64_t)clkRate * (uint64_t)findPllMMult(SYSCON->SYSPLLCTRL, SYSCON->SYSPLLSSCTRL0);
}
else
{
/* SS multipler used for rate */
workRate = 0;
/* Adjust by fractional */
workRate = workRate + ((clkRate * (uint64_t)((SYSCON->SYSPLLSSCTRL1 & 0x7FF) >> 0)) / 0x800);
}
clkRate = workRate / ((uint64_t)postdiv);
}
break;
case 0x03: /* RTC oscillator 32 kHz output (32k_clk) */
clkRate = CLK_RTC_32K_CLK;
break;
default:
break;
}
SystemCoreClock = clkRate / ((SYSCON->AHBCLKDIV & 0xFF) + 1);
}
/* ----------------------------------------------------------------------------
-- SystemInitHook()
---------------------------------------------------------------------------- */
__attribute__ ((weak)) void SystemInitHook (void) {
/* Void implementation of the weak function. */
}