238 lines
13 KiB
C
238 lines
13 KiB
C
//*****************************************************************************
|
|
//
|
|
// hw_ssi.h - Macros used when accessing the SSI hardware.
|
|
//
|
|
// Copyright (c) 2005-2020 Texas Instruments Incorporated. All rights reserved.
|
|
// Software License Agreement
|
|
//
|
|
// Redistribution and use in source and binary forms, with or without
|
|
// modification, are permitted provided that the following conditions
|
|
// are met:
|
|
//
|
|
// Redistributions of source code must retain the above copyright
|
|
// notice, this list of conditions and the following disclaimer.
|
|
//
|
|
// Redistributions in binary form must reproduce the above copyright
|
|
// notice, this list of conditions and the following disclaimer in the
|
|
// documentation and/or other materials provided with the
|
|
// distribution.
|
|
//
|
|
// Neither the name of Texas Instruments Incorporated nor the names of
|
|
// its contributors may be used to endorse or promote products derived
|
|
// from this software without specific prior written permission.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
//
|
|
// This is part of revision 2.2.0.295 of the Tiva Firmware Development Package.
|
|
//
|
|
//*****************************************************************************
|
|
|
|
#ifndef __HW_SSI_H__
|
|
#define __HW_SSI_H__
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the SSI register offsets.
|
|
//
|
|
//*****************************************************************************
|
|
#define SSI_O_CR0 0x00000000 // SSI Control 0
|
|
#define SSI_O_CR1 0x00000004 // SSI Control 1
|
|
#define SSI_O_DR 0x00000008 // SSI Data
|
|
#define SSI_O_SR 0x0000000C // SSI Status
|
|
#define SSI_O_CPSR 0x00000010 // SSI Clock Prescale
|
|
#define SSI_O_IM 0x00000014 // SSI Interrupt Mask
|
|
#define SSI_O_RIS 0x00000018 // SSI Raw Interrupt Status
|
|
#define SSI_O_MIS 0x0000001C // SSI Masked Interrupt Status
|
|
#define SSI_O_ICR 0x00000020 // SSI Interrupt Clear
|
|
#define SSI_O_DMACTL 0x00000024 // SSI DMA Control
|
|
#define SSI_O_PP 0x00000FC0 // SSI Peripheral Properties
|
|
#define SSI_O_CC 0x00000FC8 // SSI Clock Configuration
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SSI_O_CR0 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SSI_CR0_SCR_M 0x0000FF00 // SSI Serial Clock Rate
|
|
#define SSI_CR0_SPH 0x00000080 // SSI Serial Clock Phase
|
|
#define SSI_CR0_SPO 0x00000040 // SSI Serial Clock Polarity
|
|
#define SSI_CR0_FRF_M 0x00000030 // SSI Frame Format Select
|
|
#define SSI_CR0_FRF_MOTO 0x00000000 // Freescale SPI Frame Format
|
|
#define SSI_CR0_FRF_TI 0x00000010 // Synchronous Serial Frame Format
|
|
#define SSI_CR0_FRF_NMW 0x00000020 // MICROWIRE Frame Format
|
|
#define SSI_CR0_DSS_M 0x0000000F // SSI Data Size Select
|
|
#define SSI_CR0_DSS_4 0x00000003 // 4-bit data
|
|
#define SSI_CR0_DSS_5 0x00000004 // 5-bit data
|
|
#define SSI_CR0_DSS_6 0x00000005 // 6-bit data
|
|
#define SSI_CR0_DSS_7 0x00000006 // 7-bit data
|
|
#define SSI_CR0_DSS_8 0x00000007 // 8-bit data
|
|
#define SSI_CR0_DSS_9 0x00000008 // 9-bit data
|
|
#define SSI_CR0_DSS_10 0x00000009 // 10-bit data
|
|
#define SSI_CR0_DSS_11 0x0000000A // 11-bit data
|
|
#define SSI_CR0_DSS_12 0x0000000B // 12-bit data
|
|
#define SSI_CR0_DSS_13 0x0000000C // 13-bit data
|
|
#define SSI_CR0_DSS_14 0x0000000D // 14-bit data
|
|
#define SSI_CR0_DSS_15 0x0000000E // 15-bit data
|
|
#define SSI_CR0_DSS_16 0x0000000F // 16-bit data
|
|
#define SSI_CR0_SCR_S 8
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SSI_O_CR1 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SSI_CR1_EOM 0x00000800 // Stop Frame (End of Message)
|
|
#define SSI_CR1_FSSHLDFRM 0x00000400 // FSS Hold Frame
|
|
#define SSI_CR1_HSCLKEN 0x00000200 // High Speed Clock Enable
|
|
#define SSI_CR1_DIR 0x00000100 // SSI Direction of Operation
|
|
#define SSI_CR1_MODE_M 0x000000C0 // SSI Mode
|
|
#define SSI_CR1_MODE_LEGACY 0x00000000 // Legacy SSI mode
|
|
#define SSI_CR1_MODE_BI 0x00000040 // Bi-SSI mode
|
|
#define SSI_CR1_MODE_QUAD 0x00000080 // Quad-SSI Mode
|
|
#define SSI_CR1_MODE_ADVANCED 0x000000C0 // Advanced SSI Mode with 8-bit
|
|
// packet size
|
|
#define SSI_CR1_EOT 0x00000010 // End of Transmission
|
|
#define SSI_CR1_MS 0x00000004 // SSI Master/Slave Select
|
|
#define SSI_CR1_SSE 0x00000002 // SSI Synchronous Serial Port
|
|
// Enable
|
|
#define SSI_CR1_LBM 0x00000001 // SSI Loopback Mode
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SSI_O_DR register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SSI_DR_DATA_M 0x0000FFFF // SSI Receive/Transmit Data
|
|
#define SSI_DR_DATA_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SSI_O_SR register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SSI_SR_BSY 0x00000010 // SSI Busy Bit
|
|
#define SSI_SR_RFF 0x00000008 // SSI Receive FIFO Full
|
|
#define SSI_SR_RNE 0x00000004 // SSI Receive FIFO Not Empty
|
|
#define SSI_SR_TNF 0x00000002 // SSI Transmit FIFO Not Full
|
|
#define SSI_SR_TFE 0x00000001 // SSI Transmit FIFO Empty
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SSI_O_CPSR register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SSI_CPSR_CPSDVSR_M 0x000000FF // SSI Clock Prescale Divisor
|
|
#define SSI_CPSR_CPSDVSR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SSI_O_IM register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SSI_IM_EOTIM 0x00000040 // End of Transmit Interrupt Mask
|
|
#define SSI_IM_DMATXIM 0x00000020 // SSI Transmit DMA Interrupt Mask
|
|
#define SSI_IM_DMARXIM 0x00000010 // SSI Receive DMA Interrupt Mask
|
|
#define SSI_IM_TXIM 0x00000008 // SSI Transmit FIFO Interrupt Mask
|
|
#define SSI_IM_RXIM 0x00000004 // SSI Receive FIFO Interrupt Mask
|
|
#define SSI_IM_RTIM 0x00000002 // SSI Receive Time-Out Interrupt
|
|
// Mask
|
|
#define SSI_IM_RORIM 0x00000001 // SSI Receive Overrun Interrupt
|
|
// Mask
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SSI_O_RIS register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SSI_RIS_EOTRIS 0x00000040 // End of Transmit Raw Interrupt
|
|
// Status
|
|
#define SSI_RIS_DMATXRIS 0x00000020 // SSI Transmit DMA Raw Interrupt
|
|
// Status
|
|
#define SSI_RIS_DMARXRIS 0x00000010 // SSI Receive DMA Raw Interrupt
|
|
// Status
|
|
#define SSI_RIS_TXRIS 0x00000008 // SSI Transmit FIFO Raw Interrupt
|
|
// Status
|
|
#define SSI_RIS_RXRIS 0x00000004 // SSI Receive FIFO Raw Interrupt
|
|
// Status
|
|
#define SSI_RIS_RTRIS 0x00000002 // SSI Receive Time-Out Raw
|
|
// Interrupt Status
|
|
#define SSI_RIS_RORRIS 0x00000001 // SSI Receive Overrun Raw
|
|
// Interrupt Status
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SSI_O_MIS register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SSI_MIS_EOTMIS 0x00000040 // End of Transmit Masked Interrupt
|
|
// Status
|
|
#define SSI_MIS_DMATXMIS 0x00000020 // SSI Transmit DMA Masked
|
|
// Interrupt Status
|
|
#define SSI_MIS_DMARXMIS 0x00000010 // SSI Receive DMA Masked Interrupt
|
|
// Status
|
|
#define SSI_MIS_TXMIS 0x00000008 // SSI Transmit FIFO Masked
|
|
// Interrupt Status
|
|
#define SSI_MIS_RXMIS 0x00000004 // SSI Receive FIFO Masked
|
|
// Interrupt Status
|
|
#define SSI_MIS_RTMIS 0x00000002 // SSI Receive Time-Out Masked
|
|
// Interrupt Status
|
|
#define SSI_MIS_RORMIS 0x00000001 // SSI Receive Overrun Masked
|
|
// Interrupt Status
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SSI_O_ICR register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SSI_ICR_EOTIC 0x00000040 // End of Transmit Interrupt Clear
|
|
#define SSI_ICR_DMATXIC 0x00000020 // SSI Transmit DMA Interrupt Clear
|
|
#define SSI_ICR_DMARXIC 0x00000010 // SSI Receive DMA Interrupt Clear
|
|
#define SSI_ICR_RTIC 0x00000002 // SSI Receive Time-Out Interrupt
|
|
// Clear
|
|
#define SSI_ICR_RORIC 0x00000001 // SSI Receive Overrun Interrupt
|
|
// Clear
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SSI_O_DMACTL register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SSI_DMACTL_TXDMAE 0x00000002 // Transmit DMA Enable
|
|
#define SSI_DMACTL_RXDMAE 0x00000001 // Receive DMA Enable
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SSI_O_PP register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SSI_PP_FSSHLDFRM 0x00000008 // FSS Hold Frame Capability
|
|
#define SSI_PP_MODE_M 0x00000006 // Mode of Operation
|
|
#define SSI_PP_MODE_LEGACY 0x00000000 // Legacy SSI mode
|
|
#define SSI_PP_MODE_ADVBI 0x00000002 // Legacy mode, Advanced SSI mode
|
|
// and Bi-SSI mode enabled
|
|
#define SSI_PP_MODE_ADVBIQUAD 0x00000004 // Legacy mode, Advanced mode,
|
|
// Bi-SSI and Quad-SSI mode enabled
|
|
#define SSI_PP_HSCLK 0x00000001 // High Speed Capability
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SSI_O_CC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SSI_CC_CS_M 0x0000000F // SSI Baud Clock Source
|
|
#define SSI_CC_CS_SYSPLL 0x00000000 // System clock (based on clock
|
|
// source and divisor factor)
|
|
#define SSI_CC_CS_PIOSC 0x00000005 // PIOSC
|
|
|
|
#endif // __HW_SSI_H__
|