rt-thread-official/bsp/fujitsu/mb9x/mb9bf500r/CMSIS/system_mb9bf50x.c

112 lines
4.3 KiB
C
Raw Permalink Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/************************************************************************/
/* (C) Fujitsu Semiconductor Europe GmbH */
/* */
/* The following software deliverable is intended for and must only be */
/* used for reference and in an evaluation laboratory environment. */
/* It is provided on an as-is basis without charge and is subject to */
/* alterations. */
/* It is the users obligation to fully test the software in its */
/* environment and to ensure proper functionality, qualification and */
/* compliance with component specifications. */
/* */
/* In the event the software deliverable includes the use of open */
/* source components, the provisions of the governing open source */
/* license agreement shall apply with respect to such software */
/* deliverable. */
/* FSEU does not warrant that the deliverables do not infringe any */
/* third party intellectual property right (IPR). In the event that */
/* the deliverables infringe a third party IPR it is the sole */
/* responsibility of the customer to obtain necessary licenses to */
/* continue the usage of the deliverable. */
/* */
/* To the maximum extent permitted by applicable law FSEU disclaims all */
/* warranties, whether express or implied, in particular, but not */
/* limited to, warranties of merchantability and fitness for a */
/* particular purpose for which the deliverable is not designated. */
/* */
/* To the maximum extent permitted by applicable law, FSEU's liability */
/* is restricted to intention and gross negligence. */
/* FSEU is not liable for consequential damages. */
/* */
/* (V1.4) */
/************************************************************************/
#include "mb9bf506r.h"
/*
* 80MHz : Master Clock
*/
const uint32_t SystemFrequency = 80000000UL;
uint32_t SysFreHCLK = 80000000UL; /* HCLK = MasterClock / 1 */
uint32_t SysFrePCLK0 = 40000000UL; /* PCLK0 = HCLK / 2 */
uint32_t SysFrePCLK1 = 40000000UL; /* PCLK1 = HCLK / 2 */
uint32_t SysFrePCLK2 = 40000000UL; /* PCLK2 = HCLK / 2 */
uint32_t SysFreTPIU = 0UL; /* TPIUCLK : Disable */
/*
* Prototype of internal function
*/
static void ClockInit(void);
static void HwwdtDisable(void);
/*
* Setup the microcontroller system
*/
void SystemInit (void)
{
HwwdtDisable(); /* Disable Hardware Watchdog */
ClockInit(); /* Initialize Clock */
}
/*
* Initialize Clock
*/
static void ClockInit(void)
{
/*set Main clock stabilization
wait time to 2ms*/
FM3_CRG->CSW_TMR = 0x79;
/*Enable Main Oscilator*/
FM3_CRG->SCM_CTL |= 1<<1;
/*Wait stabilization end*/
while(!(FM3_CRG->SCM_STR & 0x02));
/* sub CLK enable */
//FM3_CRG->SCM_CTL |= 0x08;
//while(!(FM3_CRG->SCM_STR & 0x08));
/*Set PLL stabilization
wait time to 512uS*/
FM3_CRG->PSW_TMR |= 2;
/*Set PLL to 80MHz*/
FM3_CRG->PLL_CTL1 = 0; /*K = 1, M=1*/
FM3_CRG->PLL_CTL2 = 19; /*N = 20*/
/*Enable PLL*/
FM3_CRG->SCM_CTL |= 0x10;
/*Set bus prescalers*/
FM3_CRG->BSC_PSR = 0; /*Base clock Prescaler 1:1*/
FM3_CRG->APBC0_PSR |= 1; /*APB0 clock Prescaler 1:2*/
FM3_CRG->APBC1_PSR |= 1; /*APB1 clock Prescaler 1:2*/
FM3_CRG->APBC2_PSR |= 1; /*APB2 clock Prescaler 1:2*/
/*Wait PLL stabilizatoin end*/
while(!(FM3_CRG->SCM_STR & 0x10));
/*Select PLL for main clock*/
FM3_CRG->SCM_CTL |= 2<<5;
/*Wait PLL to be connected*/
while((FM3_CRG->SCM_STR & 0xe0) != 0x40);
}
/*
* Stop HW Watchdog Timer
*/
static void HwwdtDisable(void)
{
/* UnLock (except WDG_CTL) */
FM3_HWWDT->WDG_LCK = 0x1ACCE551;
/* UnLock (WDG_CTL) */
FM3_HWWDT->WDG_LCK = 0xE5331AAE;
/* Disable WDG */
FM3_HWWDT->WDG_CTL = 0x00;
}