rt-thread-official/bsp/stm32/stm32f072-st-nucleo
latercomer fe3c4d456e bsp中option env语句替换为新语句,并同步更新了source "$xxx"语句 2024-06-20 14:40:42 +08:00
..
.ci/attachconfig [ci][bsp] add strict mode 2024-01-10 18:08:09 +08:00
applications [RTduino] change the pinout group name 2024-03-29 21:49:13 +08:00
board bsp中option env语句替换为新语句,并同步更新了source "$xxx"语句 2024-06-20 14:40:42 +08:00
figures 1. Add bsp stm32f072-st-nucleo 2019-05-30 18:00:03 +08:00
.config [bsp] update projects 2024-03-21 11:23:29 +08:00
.gitignore 1. Add bsp stm32f072-st-nucleo 2019-05-30 18:00:03 +08:00
Kconfig bsp中option env语句替换为新语句,并同步更新了source "$xxx"语句 2024-06-20 14:40:42 +08:00
README.md [update] 2020-11-07 15:23:59 +08:00
README_zh.md 【Enlish readme】[bsp][stm32][f072-nucleo] add English version readme 2020-11-07 15:12:40 +08:00
SConscript 1. Add bsp stm32f072-st-nucleo 2019-05-30 18:00:03 +08:00
SConstruct [bsp]stm32工程生成路径在源码目录 2023-07-03 15:20:57 +08:00
project.ewp [bsp] update projects 2024-03-21 11:23:29 +08:00
project.eww [update] bsp .config file and rtconfig.h file. 2021-10-14 14:49:53 +08:00
project.uvoptx [bsp] Update all projects. 2022-03-29 19:28:06 +08:00
project.uvproj [bsp] update projects 2024-03-21 11:23:29 +08:00
project.uvprojx [bsp] update projects 2024-03-21 11:23:29 +08:00
rtconfig.h [bsp] update projects 2024-03-21 11:23:29 +08:00
rtconfig.py [scons][iar] 将IAR的PLATFORM字段由iar调整为iccarm 2022-06-09 07:01:59 +08:00
template.ewd 1. Add bsp stm32f072-st-nucleo 2019-05-30 18:00:03 +08:00
template.ewp 警告消除及代码格式化 2021-09-08 13:10:39 +08:00
template.eww 1. Add bsp stm32f072-st-nucleo 2019-05-30 18:00:03 +08:00
template.uvoptx [stm32][nucleo-f072] add arduino support (#5650) 2022-03-10 13:44:39 +08:00
template.uvproj 1. Add bsp stm32f072-st-nucleo 2019-05-30 18:00:03 +08:00
template.uvprojx [stm32][nucleo-f072] add arduino support (#5650) 2022-03-10 13:44:39 +08:00

README.md

STM32F072-Nucleo BSP Introduction

中文

MCU: STM32F072RB @48MHz, 128KB FLASH, 16KB RAM

The STM32F072x8/xB microcontrollers incorporate the high-performance ARM®Cortex®-M0 32-bit RISC core operating at up to 48 MHz frequency, high-speed embedded memories (up to 128 Kbytes of Flash memory and 16 Kbytes of SRAM), and an extensive range of enhanced peripherals and I/Os. All devices offer standard communication interfaces (two I2Cs, two SPI/I2S, one HDMI CEC and four USARTs), one USB Full-speed device (crystal-less), one CAN, one 12-bit ADC, one 12-bit DAC with two channels, seven 16-bit timers, one 32-bit timer and an advanced-control PWM timer.

The STM32F072x8/xB microcontrollers operate in the -40 to +85 °C and -40 to +105 °C temperature ranges, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving modes allows the design of low-power applications. The STM32F072x8/xB microcontrollers include devices in seven different packages ranging from 48 pins to 100 pins with a die form also available upon request. Depending on the device chosen, different sets of peripherals are included. These features make the STM32F072x8/xB microcontrollers suitable for a wide range of applications such as application control and user interfaces, hand-held equipment, A/V receivers and digital TV, PC peripherals, gaming and GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, video intercoms and HVACs.

KEY FEATURES

  • Core: ARM®32-bit Cortex®-M0 CPU, frequency up to 48 MHz

  • Memories

    • 64 to 128 Kbytes of Flash memory
    • 16 Kbytes of SRAM with HW parity
  • CRC calculation unit

  • Reset and power management

    • Digital and I/O supply: VDD= 2.0 V to 3.6 V
    • Analog supply: VDDA= VDDto 3.6 V
    • Selected I/Os: VDDIO2= 1.65 V to 3.6 V
    • Power-on/Power down reset (POR/PDR)
    • Programmable voltage detector (PVD)
    • Low power modes: Sleep, Stop, Standby
    • VBATsupply for RTC and backup registers
  • Clock management

    • 4 to 32 MHz crystal oscillator
    • 32 kHz oscillator for RTC with calibration
    • Internal 8 MHz RC with x6 PLL option
    • Internal 40 kHz RC oscillator
    • Internal 48 MHz oscillator with automatic trimming based on ext. synchronization
  • Up to 87 fast I/Os

    • All mappable on external interrupt vectors
    • Up to 68 I/Os with 5V tolerant capability and 19 with independent supply VDDIO2
  • Seven-channel DMA controller

  • One 12-bit, 1.0 μs ADC (up to 16 channels)

    • Conversion range: 0 to 3.6 V
    • Separate analog supply: 2.4 V to 3.6 V
  • One 12-bit D/A converter (with 2 channels)

  • Two fast low-power analog comparators with programmable input and output

  • Up to 24 capacitive sensing channels for touchkey, linear and rotary touch sensors

  • Calendar RTC with alarm and periodic wakeup from Stop/Standby

  • 12 timers

    • One 16-bit advanced-control timer for six-channel PWM output
    • One 32-bit and seven 16-bit timers, with up to four IC/OC, OCN, usable for IR control decoding or DAC control
    • Independent and system watchdog timers
    • SysTick timer
  • Communication interfaces

    • Two I2C interfaces supporting Fast Mode Plus (1 Mbit/s) with 20 mA current sink, one supporting SMBus/PMBus and wakeup
    • Four USARTs supporting master synchronous SPI and modem control, two with ISO7816 interface, LIN, IrDA, auto baud rate detection and wakeup feature
    • Two SPIs (18 Mbit/s) with 4 to 16 programmable bit frames, and with I2S interface multiplexed
    • CAN interface
    • USB 2.0 full-speed interface, able to run from internal 48 MHz oscillator and with BCD and LPM support
  • HDMI CEC wakeup on header reception

  • Serial wire debug (SWD)

  • 96-bit unique ID

  • All packages ECOPACK®2

Read more

Documents Description
STM32_Nucleo-64_BSP_Introduction How to run RT-Thread on STM32 Nucleo-64 boards (Must-Read)
STM32F072RB ST Official Website STM32F072RB datasheet and other resources

Maintained By

刘恒

iuzxhl@qq.com

Translated By

Meco Man @ RT-Thread Community

jiantingman@foxmail.com

https://github.com/mysterywolf