570 lines
21 KiB
C
570 lines
21 KiB
C
/*********************************************************************************************************//**
|
|
* @file IP/Example/ht32f5xxxx_02_usbdconf.h
|
|
* @version $Rev:: 5656 $
|
|
* @date $Date:: 2021-11-24 #$
|
|
* @brief The configuration file of USB Device Driver.
|
|
*************************************************************************************************************
|
|
* @attention
|
|
*
|
|
* Firmware Disclaimer Information
|
|
*
|
|
* 1. The customer hereby acknowledges and agrees that the program technical documentation, including the
|
|
* code, which is supplied by Holtek Semiconductor Inc., (hereinafter referred to as "HOLTEK") is the
|
|
* proprietary and confidential intellectual property of HOLTEK, and is protected by copyright law and
|
|
* other intellectual property laws.
|
|
*
|
|
* 2. The customer hereby acknowledges and agrees that the program technical documentation, including the
|
|
* code, is confidential information belonging to HOLTEK, and must not be disclosed to any third parties
|
|
* other than HOLTEK and the customer.
|
|
*
|
|
* 3. The program technical documentation, including the code, is provided "as is" and for customer reference
|
|
* only. After delivery by HOLTEK, the customer shall use the program technical documentation, including
|
|
* the code, at their own risk. HOLTEK disclaims any expressed, implied or statutory warranties, including
|
|
* the warranties of merchantability, satisfactory quality and fitness for a particular purpose.
|
|
*
|
|
* <h2><center>Copyright (C) Holtek Semiconductor Inc. All rights reserved</center></h2>
|
|
************************************************************************************************************/
|
|
// <<< Use Configuration Wizard in Context Menu >>>
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------------------------------------*/
|
|
#ifndef __HT32F5XXXX_02_USBDCONF_H
|
|
#define __HT32F5XXXX_02_USBDCONF_H
|
|
|
|
// <e0> Enter Low Power mode when Suspended
|
|
#define USBDCORE_ENABLE_LOW_POWER (0)
|
|
// </e>
|
|
|
|
#if (USBDCORE_ENABLE_LOW_POWER == 1)
|
|
#define USBDCore_LowPower() PWRCU_DeepSleep1(PWRCU_SLEEP_ENTRY_WFE)
|
|
#else
|
|
#define USBDCore_LowPower(...)
|
|
#endif
|
|
|
|
/*----------------------------------------------------------------------------------------------------------*/
|
|
/* USB Interrupt Enable */
|
|
/*----------------------------------------------------------------------------------------------------------*/
|
|
// <h> USB Interrupt Setting (UIER)
|
|
// <o0.0> USB Global Interrupt Enable (UGIE) (Default)
|
|
// <o0.1> Start Of Frame Interrupt Enable (SOFIE)
|
|
// <o0.2> USB Reset Interrupt Enable (URSTIE) (Default)
|
|
// <o0.3> Resume Interrupt Enable (RSMIE) (Default)
|
|
// <o0.4> Suspend Interrupt Enable (SUSPIE) (Default)
|
|
// <o0.5> Expected Start of Frame Interrupt Enable (ESOFE)
|
|
// <o0.8> Control Endpoint Interrupt Enable (EP0IE) (Default)
|
|
// <o0.9> Endpoint1 Interrupt Enable (EP1IE)
|
|
// <o0.10> Endpoint2 Interrupt Enable (EP2IE)
|
|
// <o0.11> Endpoint3 Interrupt Enable (EP3IE)
|
|
// <o0.12> Endpoint4 Interrupt Enable (EP4IE)
|
|
// <o0.13> Endpoint5 Interrupt Enable (EP5IE)
|
|
// <o0.14> Endpoint6 Interrupt Enable (EP6IE)
|
|
// <o0.15> Endpoint7 Interrupt Enable (EP7IE)
|
|
// <o0.16> Endpoint8 Interrupt Enable (EP8IE)
|
|
// <o0.17> Endpoint9 Interrupt Enable (EP9IE)
|
|
#define _UIER (0x011D)
|
|
// </h>
|
|
|
|
|
|
/*----------------------------------------------------------------------------------------------------------*/
|
|
/* Endpoint0 Configuration Setting */
|
|
/*----------------------------------------------------------------------------------------------------------*/
|
|
// <h> Control Endpoint0 Configuration
|
|
// <o0> Endpoint Buffer Length (EPLEN)
|
|
// <8=> 8 bytes
|
|
// <16=> 16 bytes
|
|
// <32=> 32 bytes
|
|
// <64=> 64 bytes
|
|
/* Maximum: 64 Bytes */
|
|
#define _EP0LEN (64)
|
|
|
|
|
|
// <h> Control Endpoint0 Interrupt Enable Settings (EP0IER)
|
|
// <o0.0> OUT Token Packet Received Interrupt Enable (OTRXIE)
|
|
// <o0.1> OUT Data Packet Received Interrupt Enable (ODRXIE) (Default)
|
|
// <o0.2> OUT Data Buffer Overrun Interrupt Enable (ODOVIE)
|
|
// <o0.3> IN Token Packet Received Interrupt Enable (ITRXIE)
|
|
// <o0.4> IN Data Packet Transmitted Interrupt Enable (IDTXIE) (Default)
|
|
// <o0.5> NAK Transmitted Interrupt Enable (NAKIE)
|
|
// <o0.6> STALL Transmitted Interrupt Enable (STLIE)
|
|
// <o0.7> USB Error Interrupt Enable (UERIE)
|
|
// <o0.8> SETUP Token Packet Received Interrupt Enable (STRXIE)
|
|
// <o0.9> SETUP Data Packet Received Interrupt Enable (SDRXIE) (Default)
|
|
// <o0.10> SETUP Data Error Interrupt Enable (SDERIE)
|
|
// <o0.11> Zero Length Data Packet Received Interrupt Enable (ZLRXIE)
|
|
#define _EP0_IER (0x212)
|
|
// </h>
|
|
// </h>
|
|
|
|
/*----------------------------------------------------------------------------------------------------------*/
|
|
/* Endpoint1 Configuration Setting */
|
|
/*----------------------------------------------------------------------------------------------------------*/
|
|
// <e0> Endpoint1 Configuration
|
|
#define _EP1_ENABLE (0)
|
|
|
|
// <o0> Endpoint Address (EPADR)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
// <8=> 8
|
|
// <9=> 9
|
|
#define _EP1_CFG_EPADR (1)
|
|
|
|
// <o0.0> Endpoint Enable (EPEN)
|
|
#define _EP1_CFG_EPEN_TMP (1)
|
|
|
|
// <o0> Endpoint Transfer Type
|
|
// <2=> Bulk
|
|
// <3=> Interrupt
|
|
#define _EP1_TYPR (3)
|
|
|
|
// <o0> Endpoint Direction (EPDIR)
|
|
// <1=> IN
|
|
// <0=> OUT
|
|
#define _EP1_CFG_EPDIR (1)
|
|
|
|
// <o0> Endpoint Buffer Length (EPLEN) (in byte) <4-64:4>
|
|
/* Maximum: 64 Bytes */
|
|
#define _EP1LEN_TMP (8)
|
|
|
|
// <h> Endpoint Interrupt Enable Settings (EPIER)
|
|
// <o0> Endpoint Interrupt Enable Settings (EPIER) <0x0-0xFF:1>
|
|
// <o0.0> OUT Token Packet Received Interrupt Enable (OTRXIE)
|
|
// <o0.1> OUT Data Packet Received Interrupt Enable (ODRXIE)
|
|
// <o0.2> OUT Data Buffer Overrun Interrupt Enable (ODOVIE)
|
|
// <o0.3> IN Token Packet Received Interrupt Enable (ITRXIE)
|
|
// <o0.4> IN Data Packet Transmitted Interrupt Enable (IDTXIE)
|
|
// <o0.5> NAK Transmitted Interrupt Enable (NAKIE)
|
|
// <o0.6> STALL Transmitted Interrupt Enable (STLIE)
|
|
// <o0.7> USB Error Interrupt Enable (UERIE)
|
|
#define _EP1_IER (0x10)
|
|
// </h>
|
|
// </e>
|
|
|
|
|
|
/*----------------------------------------------------------------------------------------------------------*/
|
|
/* Endpoint2 Configuration Setting */
|
|
/*----------------------------------------------------------------------------------------------------------*/
|
|
// <e0> Endpoint2 Configuration
|
|
#define _EP2_ENABLE (0)
|
|
|
|
// <o0> Endpoint Address (EPADR)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
// <8=> 8
|
|
// <9=> 9
|
|
#define _EP2_CFG_EPADR (2)
|
|
|
|
// <o0.0> Endpoint Enable (EPEN)
|
|
#define _EP2_CFG_EPEN_TMP (1)
|
|
|
|
// <o0> Endpoint Transfer Type
|
|
// <2=> Bulk
|
|
// <3=> Interrupt
|
|
#define _EP2_TYPR (3)
|
|
|
|
// <o0> Endpoint Direction (EPDIR)
|
|
// <1=> IN
|
|
// <0=> OUT
|
|
#define _EP2_CFG_EPDIR (0)
|
|
|
|
// <o0> Endpoint Buffer Length (EPLEN) (in byte) <4-64:4>
|
|
/* Maximum: 64 Bytes */
|
|
#define _EP2LEN_TMP (8)
|
|
|
|
// <h> Endpoint Interrupt Enable Settings (EPIER)
|
|
// <o0> Endpoint Interrupt Enable Settings (EPIER) <0x0-0xFF:1>
|
|
// <o0.0> OUT Token Packet Received Interrupt Enable (OTRXIE)
|
|
// <o0.1> OUT Data Packet Received Interrupt Enable (ODRXIE)
|
|
// <o0.2> OUT Data Buffer Overrun Interrupt Enable (ODOVIE)
|
|
// <o0.3> IN Token Packet Received Interrupt Enable (ITRXIE)
|
|
// <o0.4> IN Data Packet Transmitted Interrupt Enable (IDTXIE)
|
|
// <o0.5> NAK Transmitted Interrupt Enable (NAKIE)
|
|
// <o0.6> STALL Transmitted Interrupt Enable (STLIE)
|
|
// <o0.7> USB Error Interrupt Enable (UERIE)
|
|
#define _EP2_IER (0x002)
|
|
// </h>
|
|
// </e>
|
|
|
|
/*----------------------------------------------------------------------------------------------------------*/
|
|
/* Endpoint3 Configuration Setting */
|
|
/*----------------------------------------------------------------------------------------------------------*/
|
|
// <e0> Endpoint3 Configuration
|
|
#define _EP3_ENABLE (0)
|
|
|
|
// <o0> Endpoint Address (EPADR)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
// <8=> 8
|
|
// <9=> 9
|
|
#define _EP3_CFG_EPADR (3)
|
|
|
|
// <o0.0> Endpoint Enable (EPEN)
|
|
#define _EP3_CFG_EPEN_TMP (1)
|
|
|
|
// <o0> Endpoint Transfer Type
|
|
// <2=> Bulk
|
|
// <3=> Interrupt
|
|
#define _EP3_TYPR (3)
|
|
|
|
// <o0> Endpoint Direction (EPDIR)
|
|
// <1=> IN
|
|
// <0=> OUT
|
|
#define _EP3_CFG_EPDIR (1)
|
|
|
|
// <o0> Endpoint Buffer Length (EPLEN) (in byte) <4-64:4>
|
|
/* Maximum: 64 Bytes */
|
|
#define _EP3LEN_TMP (8)
|
|
|
|
// <h> Endpoint Interrupt Enable Settings (EPIER)
|
|
// <o0> Endpoint Interrupt Enable Settings (EPIER) <0x0-0xFF:1>
|
|
// <o0.0> OUT Token Packet Received Interrupt Enable (OTRXIE)
|
|
// <o0.1> OUT Data Packet Received Interrupt Enable (ODRXIE)
|
|
// <o0.2> OUT Data Buffer Overrun Interrupt Enable (ODOVIE)
|
|
// <o0.3> IN Token Packet Received Interrupt Enable (ITRXIE)
|
|
// <o0.4> IN Data Packet Transmitted Interrupt Enable (IDTXIE)
|
|
// <o0.5> NAK Transmitted Interrupt Enable (NAKIE)
|
|
// <o0.6> STALL Transmitted Interrupt Enable (STLIE)
|
|
// <o0.7> USB Error Interrupt Enable (UERIE)
|
|
#define _EP3_IER (0x10)
|
|
// </h>
|
|
// </e>
|
|
|
|
/*----------------------------------------------------------------------------------------------------------*/
|
|
/* Endpoint4 Configuration Setting */
|
|
/*----------------------------------------------------------------------------------------------------------*/
|
|
// <e0> Endpoint4 Configuration
|
|
#define _EP4_ENABLE (0)
|
|
|
|
// <o0> Endpoint Address (EPADR)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
// <8=> 8
|
|
// <9=> 9
|
|
#define _EP4_CFG_EPADR (4)
|
|
|
|
// <o0.0> Endpoint Enable (EPEN)
|
|
#define _EP4_CFG_EPEN_TMP (1)
|
|
|
|
// <o0> Endpoint Transfer Type
|
|
// <1=> Isochronous
|
|
// <2=> Bulk
|
|
// <3=> Interrupt
|
|
#define _EP4_TYPR (3)
|
|
|
|
// <o0> Endpoint Direction (EPDIR)
|
|
// <1=> IN
|
|
// <0=> OUT
|
|
#define _EP4_CFG_EPDIR (0)
|
|
|
|
// <o0> Endpoint Buffer Length (EPLEN) (in byte) <4-1000:4>
|
|
/* Maximum: 1000 Bytes */
|
|
#define _EP4LEN_TMP (8)
|
|
|
|
// <o0> Single/Double Buffer Selection (SDBS)
|
|
// <0=> Single Buffer
|
|
// <1=> Double Buffer
|
|
#define _EP4_CFG_SDBS (0)
|
|
|
|
// <h> Endpoint Interrupt Enable Settings (EPIER)
|
|
// <o0> Endpoint Interrupt Enable Settings (EPIER) <0x0-0xFF:1>
|
|
// <o0.0> OUT Token Packet Received Interrupt Enable (OTRXIE)
|
|
// <o0.1> OUT Data Packet Received Interrupt Enable (ODRXIE)
|
|
// <o0.2> OUT Data Buffer Overrun Interrupt Enable (ODOVIE)
|
|
// <o0.3> IN Token Packet Received Interrupt Enable (ITRXIE)
|
|
// <o0.4> IN Data Packet Transmitted Interrupt Enable (IDTXIE)
|
|
// <o0.5> NAK Transmitted Interrupt Enable (NAKIE)
|
|
// <o0.6> STALL Transmitted Interrupt Enable (STLIE)
|
|
// <o0.7> USB Error Interrupt Enable (UERIE)
|
|
#define _EP4_IER (0x02)
|
|
// </h>
|
|
// </e>
|
|
|
|
|
|
/*----------------------------------------------------------------------------------------------------------*/
|
|
/* Endpoint5 Configuration Setting */
|
|
/*----------------------------------------------------------------------------------------------------------*/
|
|
// <e0> Endpoint5 Configuration
|
|
#define _EP5_ENABLE (0)
|
|
|
|
// <o0> Endpoint Address (EPADR)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
// <8=> 8
|
|
// <9=> 9
|
|
#define _EP5_CFG_EPADR (5)
|
|
|
|
// <o0.0> Endpoint Enable (EPEN)
|
|
#define _EP5_CFG_EPEN_TMP (1)
|
|
|
|
// <o0> Endpoint Transfer Type
|
|
// <1=> Isochronous
|
|
// <2=> Bulk
|
|
// <3=> Interrupt
|
|
#define _EP5_TYPR (3)
|
|
|
|
// <o0> Endpoint Direction (EPDIR)
|
|
// <1=> IN
|
|
// <0=> OUT
|
|
#define _EP5_CFG_EPDIR (1)
|
|
|
|
// <o0> Endpoint Buffer Length (EPLEN) (in byte) <4-1000:4>
|
|
/* Maximum: 1000 Bytes */
|
|
#define _EP5LEN_TMP (8)
|
|
|
|
|
|
// <o0> Single/Double Buffer Selection (SDBS)
|
|
// <0=> Single Buffer
|
|
// <1=> Double Buffer
|
|
#define _EP5_CFG_SDBS (0)
|
|
|
|
// <h> Endpoint Interrupt Enable Settings (EPIER)
|
|
// <o0> Endpoint Interrupt Enable Settings (EPIER) <0x0-0xFF:1>
|
|
// <o0.0> OUT Token Packet Received Interrupt Enable (OTRXIE)
|
|
// <o0.1> OUT Data Packet Received Interrupt Enable (ODRXIE)
|
|
// <o0.2> OUT Data Buffer Overrun Interrupt Enable (ODOVIE)
|
|
// <o0.3> IN Token Packet Received Interrupt Enable (ITRXIE)
|
|
// <o0.4> IN Data Packet Transmitted Interrupt Enable (IDTXIE)
|
|
// <o0.5> NAK Transmitted Interrupt Enable (NAKIE)
|
|
// <o0.6> STALL Transmitted Interrupt Enable (STLIE)
|
|
// <o0.7> USB Error Interrupt Enable (UERIE)
|
|
#define _EP5_IER (0x10)
|
|
// </h>
|
|
// </e>
|
|
|
|
|
|
/*----------------------------------------------------------------------------------------------------------*/
|
|
/* Endpoint6 Configuration Setting */
|
|
/*----------------------------------------------------------------------------------------------------------*/
|
|
// <e0> Endpoint6 Configuration
|
|
#define _EP6_ENABLE (0)
|
|
|
|
// <o0> Endpoint Address (EPADR)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
// <8=> 8
|
|
// <9=> 9
|
|
#define _EP6_CFG_EPADR (6)
|
|
|
|
// <o0.0> Endpoint Enable (EPEN)
|
|
#define _EP6_CFG_EPEN_TMP (1)
|
|
|
|
// <o0> Endpoint Transfer Type
|
|
// <1=> Isochronous
|
|
// <2=> Bulk
|
|
// <3=> Interrupt
|
|
#define _EP6_TYPR (3)
|
|
|
|
// <o0> Endpoint Direction (EPDIR)
|
|
// <1=> IN
|
|
// <0=> OUT
|
|
#define _EP6_CFG_EPDIR (0)
|
|
|
|
// <o0> Endpoint Buffer Length (EPLEN) (in byte) <4-1000:4>
|
|
/* Maximum: 1000 Bytes */
|
|
#define _EP6LEN_TMP (8)
|
|
|
|
// <o0> Single/Double Buffer Selection (SDBS)
|
|
// <0=> Single Buffer
|
|
// <1=> Double Buffer
|
|
#define _EP6_CFG_SDBS (0)
|
|
|
|
// <h> Endpoint Interrupt Enable Settings (EPIER)
|
|
// <o0> Endpoint Interrupt Enable Settings (EPIER) <0x0-0xFF:1>
|
|
// <o0.0> OUT Token Packet Received Interrupt Enable (OTRXIE)
|
|
// <o0.1> OUT Data Packet Received Interrupt Enable (ODRXIE)
|
|
// <o0.2> OUT Data Buffer Overrun Interrupt Enable (ODOVIE)
|
|
// <o0.3> IN Token Packet Received Interrupt Enable (ITRXIE)
|
|
// <o0.4> IN Data Packet Transmitted Interrupt Enable (IDTXIE)
|
|
// <o0.5> NAK Transmitted Interrupt Enable (NAKIE)
|
|
// <o0.6> STALL Transmitted Interrupt Enable (STLIE)
|
|
// <o0.7> USB Error Interrupt Enable (UERIE)
|
|
#define _EP6_IER (0x02)
|
|
// </h>
|
|
// </e>
|
|
|
|
|
|
/*----------------------------------------------------------------------------------------------------------*/
|
|
/* Endpoint7 Configuration Setting */
|
|
/*----------------------------------------------------------------------------------------------------------*/
|
|
// <e0> Endpoint7 Configuration
|
|
#define _EP7_ENABLE (0)
|
|
|
|
// <o0> Endpoint Address (EPADR)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
// <8=> 8
|
|
// <9=> 9
|
|
#define _EP7_CFG_EPADR (7)
|
|
|
|
// <o0.0> Endpoint Enable (EPEN)
|
|
#define _EP7_CFG_EPEN_TMP (1)
|
|
|
|
// <o0> Endpoint Transfer Type
|
|
// <1=> Isochronous
|
|
// <2=> Bulk
|
|
// <3=> Interrupt
|
|
#define _EP7_TYPR (3)
|
|
|
|
// <o0> Endpoint Direction (EPDIR)
|
|
// <1=> IN
|
|
// <0=> OUT
|
|
#define _EP7_CFG_EPDIR (1)
|
|
|
|
// <o0> Endpoint Buffer Length (EPLEN) (in byte) <4-1000:4>
|
|
/* Maximum: 1000 Bytes */
|
|
#define _EP7LEN_TMP (8)
|
|
|
|
// <o0> Single/Double Buffer Selection (SDBS)
|
|
// <0=> Single Buffer
|
|
// <1=> Double Buffer
|
|
#define _EP7_CFG_SDBS (0)
|
|
|
|
// <h> Endpoint Interrupt Enable Settings (EPIER)
|
|
// <o0> Endpoint Interrupt Enable Settings (EPIER) <0x0-0xFF:1>
|
|
// <o0.0> OUT Token Packet Received Interrupt Enable (OTRXIE)
|
|
// <o0.1> OUT Data Packet Received Interrupt Enable (ODRXIE)
|
|
// <o0.2> OUT Data Buffer Overrun Interrupt Enable (ODOVIE)
|
|
// <o0.3> IN Token Packet Received Interrupt Enable (ITRXIE)
|
|
// <o0.4> IN Data Packet Transmitted Interrupt Enable (IDTXIE)
|
|
// <o0.5> NAK Transmitted Interrupt Enable (NAKIE)
|
|
// <o0.6> STALL Transmitted Interrupt Enable (STLIE)
|
|
// <o0.7> USB Error Interrupt Enable (UERIE)
|
|
#define _EP7_IER (0x10)
|
|
// </h>
|
|
// </e>
|
|
|
|
|
|
/*----------------------------------------------------------------------------------------------------------*/
|
|
/* Endpoint8 Configuration Setting */
|
|
/*----------------------------------------------------------------------------------------------------------*/
|
|
// <e0> Endpoint8 Configuration
|
|
#define _EP8_ENABLE (0)
|
|
|
|
// <o0> Endpoint Address (EPADR)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
// <8=> 8
|
|
// <9=> 9
|
|
#define _EP8_CFG_EPADR (8)
|
|
|
|
// <o0.0> Endpoint Enable (EPEN)
|
|
#define _EP8_CFG_EPEN_TMP (1)
|
|
|
|
// <o0> Endpoint Transfer Type
|
|
// <2=> Bulk
|
|
// <3=> Interrupt
|
|
#define _EP8_TYPR (3)
|
|
|
|
// <o0> Endpoint Direction (EPDIR)
|
|
// <1=> IN
|
|
// <0=> OUT
|
|
#define _EP8_CFG_EPDIR (1)
|
|
|
|
// <o0> Endpoint Buffer Length (EPLEN) (in byte) <4-64:4>
|
|
/* Maximum: 64 Bytes */
|
|
#define _EP8LEN_TMP (8)
|
|
|
|
// <h> Endpoint Interrupt Enable Settings (EPIER)
|
|
// <o0> Endpoint Interrupt Enable Settings (EPIER) <0x0-0xFF:1>
|
|
// <o0.0> OUT Token Packet Received Interrupt Enable (OTRXIE)
|
|
// <o0.1> OUT Data Packet Received Interrupt Enable (ODRXIE)
|
|
// <o0.2> OUT Data Buffer Overrun Interrupt Enable (ODOVIE)
|
|
// <o0.3> IN Token Packet Received Interrupt Enable (ITRXIE)
|
|
// <o0.4> IN Data Packet Transmitted Interrupt Enable (IDTXIE)
|
|
// <o0.5> NAK Transmitted Interrupt Enable (NAKIE)
|
|
// <o0.6> STALL Transmitted Interrupt Enable (STLIE)
|
|
// <o0.7> USB Error Interrupt Enable (UERIE)
|
|
#define _EP8_IER (0x10)
|
|
// </h>
|
|
// </e>
|
|
|
|
|
|
/*----------------------------------------------------------------------------------------------------------*/
|
|
/* Endpoint9 Configuration Setting */
|
|
/*----------------------------------------------------------------------------------------------------------*/
|
|
// <e0> Endpoint9 Configuration
|
|
#define _EP9_ENABLE (0)
|
|
|
|
// <o0> Endpoint Address (EPADR)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
// <8=> 8
|
|
// <9=> 9
|
|
#define _EP9_CFG_EPADR (9)
|
|
|
|
// <o0.0> Endpoint Enable (EPEN)
|
|
#define _EP9_CFG_EPEN_TMP (1)
|
|
|
|
// <o0> Endpoint Transfer Type
|
|
// <2=> Bulk
|
|
// <3=> Interrupt
|
|
#define _EP9_TYPR (3)
|
|
|
|
// <o0> Endpoint Direction (EPDIR)
|
|
// <1=> IN
|
|
// <0=> OUT
|
|
#define _EP9_CFG_EPDIR (1)
|
|
|
|
// <o0> Endpoint Buffer Length (EPLEN) (in byte) <4-64:4>
|
|
/* Maximum: 64 Bytes */
|
|
#define _EP9LEN_TMP (8)
|
|
|
|
// <h> Endpoint Interrupt Enable Settings (EPIER)
|
|
// <o0> Endpoint Interrupt Enable Settings (EPIER) <0x0-0xFF:1>
|
|
// <o0.0> OUT Token Packet Received Interrupt Enable (OTRXIE)
|
|
// <o0.1> OUT Data Packet Received Interrupt Enable (ODRXIE)
|
|
// <o0.2> OUT Data Buffer Overrun Interrupt Enable (ODOVIE)
|
|
// <o0.3> IN Token Packet Received Interrupt Enable (ITRXIE)
|
|
// <o0.4> IN Data Packet Transmitted Interrupt Enable (IDTXIE)
|
|
// <o0.5> NAK Transmitted Interrupt Enable (NAKIE)
|
|
// <o0.6> STALL Transmitted Interrupt Enable (STLIE)
|
|
// <o0.7> USB Error Interrupt Enable (UERIE)
|
|
#define _EP9_IER (0x10)
|
|
// </h>
|
|
// </e>
|
|
|
|
#endif
|