372 lines
11 KiB
C
372 lines
11 KiB
C
/*
|
|
* Copyright (c) 2015, Freescale Semiconductor, Inc.
|
|
* Copyright 2016-2019 NXP
|
|
* All rights reserved.
|
|
*
|
|
* SPDX-License-Identifier: BSD-3-Clause
|
|
*/
|
|
|
|
#include "fsl_cmp.h"
|
|
|
|
/* Component ID definition, used by tools. */
|
|
#ifndef FSL_COMPONENT_ID
|
|
#define FSL_COMPONENT_ID "platform.drivers.cmp"
|
|
#endif
|
|
|
|
/*******************************************************************************
|
|
* Prototypes
|
|
******************************************************************************/
|
|
/*!
|
|
* @brief Get instance number for CMP module.
|
|
*
|
|
* @param base CMP peripheral base address
|
|
*/
|
|
static uint32_t CMP_GetInstance(CMP_Type *base);
|
|
|
|
/*******************************************************************************
|
|
* Variables
|
|
******************************************************************************/
|
|
/*! @brief Pointers to CMP bases for each instance. */
|
|
static CMP_Type *const s_cmpBases[] = CMP_BASE_PTRS;
|
|
#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
|
|
/*! @brief Pointers to CMP clocks for each instance. */
|
|
static const clock_ip_name_t s_cmpClocks[] = CMP_CLOCKS;
|
|
#endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */
|
|
|
|
/*******************************************************************************
|
|
* Codes
|
|
******************************************************************************/
|
|
static uint32_t CMP_GetInstance(CMP_Type *base)
|
|
{
|
|
uint32_t instance;
|
|
|
|
/* Find the instance index from base address mappings. */
|
|
for (instance = 0; instance < ARRAY_SIZE(s_cmpBases); instance++)
|
|
{
|
|
if (s_cmpBases[instance] == base)
|
|
{
|
|
break;
|
|
}
|
|
}
|
|
|
|
assert(instance < ARRAY_SIZE(s_cmpBases));
|
|
|
|
return instance;
|
|
}
|
|
|
|
/*!
|
|
* brief Initializes the CMP.
|
|
*
|
|
* This function initializes the CMP module. The operations included are as follows.
|
|
* - Enabling the clock for CMP module.
|
|
* - Configuring the comparator.
|
|
* - Enabling the CMP module.
|
|
* Note that for some devices, multiple CMP instances share the same clock gate. In this case, to enable the clock for
|
|
* any instance enables all CMPs. See the appropriate MCU reference manual for the clock assignment of the CMP.
|
|
*
|
|
* param base CMP peripheral base address.
|
|
* param config Pointer to the configuration structure.
|
|
*/
|
|
void CMP_Init(CMP_Type *base, const cmp_config_t *config)
|
|
{
|
|
assert(NULL != config);
|
|
|
|
uint8_t tmp8;
|
|
|
|
#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
|
|
/* Enable the clock. */
|
|
CLOCK_EnableClock(s_cmpClocks[CMP_GetInstance(base)]);
|
|
#endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */
|
|
|
|
/* Configure. */
|
|
CMP_Enable(base, false); /* Disable the CMP module during configuring. */
|
|
/* CMPx_CR1. */
|
|
tmp8 = (uint8_t)(base->CR1 & ~(CMP_CR1_PMODE_MASK | CMP_CR1_INV_MASK | CMP_CR1_COS_MASK | CMP_CR1_OPE_MASK));
|
|
if (true == config->enableHighSpeed)
|
|
{
|
|
tmp8 |= CMP_CR1_PMODE_MASK;
|
|
}
|
|
if (true == config->enableInvertOutput)
|
|
{
|
|
tmp8 |= CMP_CR1_INV_MASK;
|
|
}
|
|
if (true == config->useUnfilteredOutput)
|
|
{
|
|
tmp8 |= CMP_CR1_COS_MASK;
|
|
}
|
|
if (true == config->enablePinOut)
|
|
{
|
|
tmp8 |= CMP_CR1_OPE_MASK;
|
|
}
|
|
#if defined(FSL_FEATURE_CMP_HAS_TRIGGER_MODE) && FSL_FEATURE_CMP_HAS_TRIGGER_MODE
|
|
if (true == config->enableTriggerMode)
|
|
{
|
|
tmp8 |= CMP_CR1_TRIGM_MASK;
|
|
}
|
|
else
|
|
{
|
|
tmp8 &= ~(uint8_t)CMP_CR1_TRIGM_MASK;
|
|
}
|
|
#endif /* FSL_FEATURE_CMP_HAS_TRIGGER_MODE */
|
|
base->CR1 = tmp8;
|
|
|
|
/* CMPx_CR0. */
|
|
tmp8 = base->CR0 & ~(uint8_t)CMP_CR0_HYSTCTR_MASK;
|
|
tmp8 |= CMP_CR0_HYSTCTR(config->hysteresisMode);
|
|
base->CR0 = tmp8;
|
|
|
|
CMP_Enable(base, config->enableCmp); /* Enable the CMP module after configured or not. */
|
|
}
|
|
|
|
/*!
|
|
* brief De-initializes the CMP module.
|
|
*
|
|
* This function de-initializes the CMP module. The operations included are as follows.
|
|
* - Disabling the CMP module.
|
|
* - Disabling the clock for CMP module.
|
|
*
|
|
* This function disables the clock for the CMP.
|
|
* Note that for some devices, multiple CMP instances share the same clock gate. In this case, before disabling the
|
|
* clock for the CMP, ensure that all the CMP instances are not used.
|
|
*
|
|
* param base CMP peripheral base address.
|
|
*/
|
|
void CMP_Deinit(CMP_Type *base)
|
|
{
|
|
/* Disable the CMP module. */
|
|
CMP_Enable(base, false);
|
|
|
|
#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
|
|
/* Disable the clock. */
|
|
CLOCK_DisableClock(s_cmpClocks[CMP_GetInstance(base)]);
|
|
#endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */
|
|
}
|
|
|
|
/*!
|
|
* brief Initializes the CMP user configuration structure.
|
|
*
|
|
* This function initializes the user configuration structure to these default values.
|
|
* code
|
|
* config->enableCmp = true;
|
|
* config->hysteresisMode = kCMP_HysteresisLevel0;
|
|
* config->enableHighSpeed = false;
|
|
* config->enableInvertOutput = false;
|
|
* config->useUnfilteredOutput = false;
|
|
* config->enablePinOut = false;
|
|
* config->enableTriggerMode = false;
|
|
* endcode
|
|
* param config Pointer to the configuration structure.
|
|
*/
|
|
void CMP_GetDefaultConfig(cmp_config_t *config)
|
|
{
|
|
assert(NULL != config);
|
|
|
|
/* Initializes the configure structure to zero. */
|
|
(void)memset(config, 0, sizeof(*config));
|
|
|
|
config->enableCmp = true; /* Enable the CMP module after initialization. */
|
|
config->hysteresisMode = kCMP_HysteresisLevel0;
|
|
config->enableHighSpeed = false;
|
|
config->enableInvertOutput = false;
|
|
config->useUnfilteredOutput = false;
|
|
config->enablePinOut = false;
|
|
#if defined(FSL_FEATURE_CMP_HAS_TRIGGER_MODE) && FSL_FEATURE_CMP_HAS_TRIGGER_MODE
|
|
config->enableTriggerMode = false;
|
|
#endif /* FSL_FEATURE_CMP_HAS_TRIGGER_MODE */
|
|
}
|
|
|
|
/*!
|
|
* brief Sets the input channels for the comparator.
|
|
*
|
|
* This function sets the input channels for the comparator.
|
|
* Note that two input channels cannot be set the same way in the application. When the user selects the same input
|
|
* from the analog mux to the positive and negative port, the comparator is disabled automatically.
|
|
*
|
|
* param base CMP peripheral base address.
|
|
* param positiveChannel Positive side input channel number. Available range is 0-7.
|
|
* param negativeChannel Negative side input channel number. Available range is 0-7.
|
|
*/
|
|
void CMP_SetInputChannels(CMP_Type *base, uint8_t positiveChannel, uint8_t negativeChannel)
|
|
{
|
|
uint8_t tmp8 = base->MUXCR;
|
|
|
|
tmp8 &= ~(uint8_t)(CMP_MUXCR_PSEL_MASK | CMP_MUXCR_MSEL_MASK);
|
|
tmp8 |= CMP_MUXCR_PSEL(positiveChannel) | CMP_MUXCR_MSEL(negativeChannel);
|
|
base->MUXCR = tmp8;
|
|
}
|
|
|
|
#if defined(FSL_FEATURE_CMP_HAS_DMA) && FSL_FEATURE_CMP_HAS_DMA
|
|
/*!
|
|
* brief Enables/disables the DMA request for rising/falling events.
|
|
*
|
|
* This function enables/disables the DMA request for rising/falling events. Either event triggers the generation of
|
|
* the DMA request from CMP if the DMA feature is enabled. Both events are ignored for generating the DMA request from
|
|
* the CMP
|
|
* if the DMA is disabled.
|
|
*
|
|
* param base CMP peripheral base address.
|
|
* param enable Enables or disables the feature.
|
|
*/
|
|
void CMP_EnableDMA(CMP_Type *base, bool enable)
|
|
{
|
|
uint8_t tmp8 = (uint8_t)(base->SCR & ~(CMP_SCR_CFR_MASK | CMP_SCR_CFF_MASK)); /* To avoid change the w1c bits. */
|
|
|
|
if (enable)
|
|
{
|
|
tmp8 |= CMP_SCR_DMAEN_MASK;
|
|
}
|
|
else
|
|
{
|
|
tmp8 &= ~(uint8_t)CMP_SCR_DMAEN_MASK;
|
|
}
|
|
base->SCR = tmp8;
|
|
}
|
|
#endif /* FSL_FEATURE_CMP_HAS_DMA */
|
|
|
|
/*!
|
|
* brief Configures the filter.
|
|
*
|
|
* param base CMP peripheral base address.
|
|
* param config Pointer to the configuration structure.
|
|
*/
|
|
void CMP_SetFilterConfig(CMP_Type *base, const cmp_filter_config_t *config)
|
|
{
|
|
assert(NULL != config);
|
|
|
|
uint8_t tmp8;
|
|
|
|
#if defined(FSL_FEATURE_CMP_HAS_EXTERNAL_SAMPLE_SUPPORT) && FSL_FEATURE_CMP_HAS_EXTERNAL_SAMPLE_SUPPORT
|
|
/* Choose the clock source for sampling. */
|
|
if (config->enableSample)
|
|
{
|
|
base->CR1 |= CMP_CR1_SE_MASK; /* Choose the external SAMPLE clock. */
|
|
}
|
|
else
|
|
{
|
|
base->CR1 &= (uint8_t)(~CMP_CR1_SE_MASK); /* Choose the internal divided bus clock. */
|
|
}
|
|
#endif /* FSL_FEATURE_CMP_HAS_EXTERNAL_SAMPLE_SUPPORT */
|
|
/* Set the filter count. */
|
|
tmp8 = (uint8_t)(base->CR0 & ~CMP_CR0_FILTER_CNT_MASK);
|
|
tmp8 |= CMP_CR0_FILTER_CNT(config->filterCount);
|
|
base->CR0 = tmp8;
|
|
/* Set the filter period. It is used as the divider to bus clock. */
|
|
base->FPR = CMP_FPR_FILT_PER(config->filterPeriod);
|
|
}
|
|
|
|
/*!
|
|
* brief Configures the internal DAC.
|
|
*
|
|
* param base CMP peripheral base address.
|
|
* param config Pointer to the configuration structure. "NULL" disables the feature.
|
|
*/
|
|
void CMP_SetDACConfig(CMP_Type *base, const cmp_dac_config_t *config)
|
|
{
|
|
uint8_t tmp8 = 0U;
|
|
|
|
if (NULL == config)
|
|
{
|
|
/* Passing "NULL" as input parameter means no available configuration. So the DAC feature is disabled.*/
|
|
base->DACCR = 0U;
|
|
return;
|
|
}
|
|
/* CMPx_DACCR. */
|
|
tmp8 |= CMP_DACCR_DACEN_MASK; /* Enable the internal DAC. */
|
|
if (kCMP_VrefSourceVin2 == config->referenceVoltageSource)
|
|
{
|
|
tmp8 |= CMP_DACCR_VRSEL_MASK;
|
|
}
|
|
tmp8 |= CMP_DACCR_VOSEL(config->DACValue);
|
|
|
|
base->DACCR = tmp8;
|
|
}
|
|
|
|
/*!
|
|
* brief Enables the interrupts.
|
|
*
|
|
* param base CMP peripheral base address.
|
|
* param mask Mask value for interrupts. See "_cmp_interrupt_enable".
|
|
*/
|
|
void CMP_EnableInterrupts(CMP_Type *base, uint32_t mask)
|
|
{
|
|
uint8_t tmp8 = (uint8_t)(base->SCR & ~(CMP_SCR_CFR_MASK | CMP_SCR_CFF_MASK)); /* To avoid change the w1c bits. */
|
|
|
|
if (0U != ((uint32_t)kCMP_OutputRisingInterruptEnable & mask))
|
|
{
|
|
tmp8 |= CMP_SCR_IER_MASK;
|
|
}
|
|
if (0U != ((uint32_t)kCMP_OutputFallingInterruptEnable & mask))
|
|
{
|
|
tmp8 |= CMP_SCR_IEF_MASK;
|
|
}
|
|
base->SCR = tmp8;
|
|
}
|
|
|
|
/*!
|
|
* brief Disables the interrupts.
|
|
*
|
|
* param base CMP peripheral base address.
|
|
* param mask Mask value for interrupts. See "_cmp_interrupt_enable".
|
|
*/
|
|
void CMP_DisableInterrupts(CMP_Type *base, uint32_t mask)
|
|
{
|
|
uint8_t tmp8 = (uint8_t)(base->SCR & ~(CMP_SCR_CFR_MASK | CMP_SCR_CFF_MASK)); /* To avoid change the w1c bits. */
|
|
|
|
if (0U != ((uint32_t)kCMP_OutputRisingInterruptEnable & mask))
|
|
{
|
|
tmp8 &= ~(uint8_t)CMP_SCR_IER_MASK;
|
|
}
|
|
if (0U != ((uint32_t)kCMP_OutputFallingInterruptEnable & mask))
|
|
{
|
|
tmp8 &= ~(uint8_t)CMP_SCR_IEF_MASK;
|
|
}
|
|
base->SCR = tmp8;
|
|
}
|
|
|
|
/*!
|
|
* brief Gets the status flags.
|
|
*
|
|
* param base CMP peripheral base address.
|
|
*
|
|
* return Mask value for the asserted flags. See "_cmp_status_flags".
|
|
*/
|
|
uint32_t CMP_GetStatusFlags(CMP_Type *base)
|
|
{
|
|
uint32_t ret32 = 0U;
|
|
|
|
if (0U != (CMP_SCR_CFR_MASK & base->SCR))
|
|
{
|
|
ret32 |= (uint32_t)kCMP_OutputRisingEventFlag;
|
|
}
|
|
if (0U != (CMP_SCR_CFF_MASK & base->SCR))
|
|
{
|
|
ret32 |= (uint32_t)kCMP_OutputFallingEventFlag;
|
|
}
|
|
if (0U != (CMP_SCR_COUT_MASK & base->SCR))
|
|
{
|
|
ret32 |= (uint32_t)kCMP_OutputAssertEventFlag;
|
|
}
|
|
return ret32;
|
|
}
|
|
|
|
/*!
|
|
* brief Clears the status flags.
|
|
*
|
|
* param base CMP peripheral base address.
|
|
* param mask Mask value for the flags. See "_cmp_status_flags".
|
|
*/
|
|
void CMP_ClearStatusFlags(CMP_Type *base, uint32_t mask)
|
|
{
|
|
uint8_t tmp8 = (uint8_t)(base->SCR & ~(CMP_SCR_CFR_MASK | CMP_SCR_CFF_MASK)); /* To avoid change the w1c bits. */
|
|
|
|
if (0U != ((uint32_t)kCMP_OutputRisingEventFlag & mask))
|
|
{
|
|
tmp8 |= CMP_SCR_CFR_MASK;
|
|
}
|
|
if (0U != ((uint32_t)kCMP_OutputFallingEventFlag & mask))
|
|
{
|
|
tmp8 |= CMP_SCR_CFF_MASK;
|
|
}
|
|
base->SCR = tmp8;
|
|
}
|