menu "Hardware Drivers Config"

    menu "On-chip Peripheral Drivers"
        source "$(BSP_DIR)/../libraries/ma35/rtt_port/Kconfig"
    endmenu

    menu "On-board Peripheral Drivers"

        config BSP_USING_CONSOLE
            bool "Enable UART0 for RTT Console(uart0)"
            select BSP_USING_UART
            select BSP_USING_UART0
            default y

        config BOARD_USING_NAU8822
            bool "NAU8822 Audio Codec supporting(over i2s0, i2c2)"
            select NU_PKG_USING_NAU8822
            select BSP_USING_I2C2
            select BSP_USING_I2S
            select BSP_USING_I2S0
            default n

        config BOARD_USING_STORAGE_SDCARD
            bool "SDCARD supporting(over sdh0)"
            select BSP_USING_SDH
            select BSP_USING_SDH0
            default y

        config BOARD_USING_STORAGE_EMMC
            bool "EMMC supporting(over sdh1)"
            select BSP_USING_SDH
            select BSP_USING_SDH1
            default y

        config BOARD_USING_STORAGE_RAWNAND
            bool "Raw NAND supporting(over nfi)"
            select BSP_USING_NFI
            select RT_USING_MTD_NAND
            default y

        config BOARD_USING_STORAGE_SPIFLASH
            bool "SPI NOR FLASH supporting(over qspi0)"
            select BSP_USING_QSPI
            select BSP_USING_QSPI0
            default n

        config BOARD_USING_STORAGE_SPINAND
            bool "SPI NAND FLASH supporting(over qspi0)"
            select BSP_USING_QSPI
            select BSP_USING_QSPI0
            select NU_PKG_USING_SPINAND
            default y

        config BOARD_USING_BUZZER
            bool "BUZZER function(over epwm1_ch5)"
            select BSP_USING_EPWM
            select BSP_USING_EPWM1
            select BSP_USING_EPWM1_PWM
            default y

        config BOARD_USING_MPU6500
            bool "MPU6500 6-axis MotionTracking Sensor(over i2c1)"
            select RT_USING_SENSOR
            select PKG_USING_MPU6XXX
            select PKG_USING_MPU6XXX_LATEST_VERSION
            select PKG_USING_MPU6XXX_ACCE
            select PKG_USING_MPU6XXX_GYRO
            select BSP_USING_I2C
            select BSP_USING_I2C1
            default y

        config BOARD_USING_USBHOST
            bool "USB HOST function"
            select BSP_USING_USBH
            default y

    endmenu

    menu "Board extended module drivers"

        config BOARD_USING_LCM
            bool "Use LCD panel."
            default y

        if BOARD_USING_LCM

            choice
                prompt "Select LCD panel devices.(Over DISP)"
                    default BOARD_USING_LCM_FW070TFT_WSVGA

                config BOARD_USING_LCM_FW070TFT_WVGA
                    bool "NuDesign TFT-LCD7-WVGA"
                    select BSP_USING_DISP
                    select LCM_USING_FW070TFT
                    help
                        Choose this option if you use 7" 800x480x32b LCD panel.

                config BOARD_USING_LCM_FW070TFT_WSVGA
                    bool "NuDesign TFT-LCD7-WSVGA"
                    select BSP_USING_DISP
                    select LCM_USING_FW070TFT_WSVGA
                    help
                        Choose this option if you use 7" 1024x600x32b LCD panel.
            endchoice

            choice
                prompt "Select Touch devices."
                    default BOARD_USING_GT911

                config BOARD_USING_GT911
                    bool "GT911 TPC"
                    select BSP_USING_I2C
                    select BSP_USING_I2C0
                    select NU_PKG_USING_TPC_GT911
                    help
                        Choose this option if you use GT911 external TSC touching function.

                config BOARD_USING_ADCTOUCH
                    bool "ADC touching"
                    select BSP_USING_ADC_TOUCH
                    select NU_PKG_USING_ADC_TOUCH
                    help
                        Choose this option if you use internal ADC touching function.

            endchoice
        endif



    config BOARD_USING_SENSOR0
        bool "CCAP-SENSOR PORT0(over i2c3/PM1/PK8)"
        select BSP_USING_I2C
        select BSP_USING_I2C3
        select BSP_USING_CCAP
        select BSP_USING_CCAP0
        default n

    if BOARD_USING_SENSOR0
        config BOARD_USING_SENSON0_ID
            int "Specify Sensor0 ID"
            default 0  if BOARD_USING_SENSOR0
            range 0 2
            help
                HM1055=0
                ADV728X=1
    endif

    config BOARD_USING_SENSOR1
        bool "CCAP-SENSOR PORT1(over i2c4/PN14/PD15)"
        select BSP_USING_I2C
        select BSP_USING_I2C4
        select BSP_USING_CCAP
        select BSP_USING_CCAP1
        default n

    if BOARD_USING_SENSOR1
        config BOARD_USING_SENSON1_ID
            int "Specify Sensor1 ID"
            default 0
            range 0 2
            help
                HM1055=0
                ADV728X=1
    endif


    endmenu

    source "$(BSP_DIR)/../libraries/nu_packages/Kconfig"

endmenu