//***************************************************************************** // // hw_flash.h - Macros used when accessing the flash controller. // // Copyright (c) 2005-2017 Texas Instruments Incorporated. All rights reserved. // Software License Agreement // // Redistribution and use in source and binary forms, with or without // modification, are permitted provided that the following conditions // are met: // // Redistributions of source code must retain the above copyright // notice, this list of conditions and the following disclaimer. // // Redistributions in binary form must reproduce the above copyright // notice, this list of conditions and the following disclaimer in the // documentation and/or other materials provided with the // distribution. // // Neither the name of Texas Instruments Incorporated nor the names of // its contributors may be used to endorse or promote products derived // from this software without specific prior written permission. // // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS // "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT // LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR // A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT // OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, // SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT // LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, // DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT // (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE // OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. // //***************************************************************************** #ifndef __HW_FLASH_H__ #define __HW_FLASH_H__ //***************************************************************************** // // The following are defines for the FLASH register offsets. // //***************************************************************************** #define FLASH_FMA 0x400FD000 // Flash Memory Address #define FLASH_FMD 0x400FD004 // Flash Memory Data #define FLASH_FMC 0x400FD008 // Flash Memory Control #define FLASH_FCRIS 0x400FD00C // Flash Controller Raw Interrupt // Status #define FLASH_FCIM 0x400FD010 // Flash Controller Interrupt Mask #define FLASH_FCMISC 0x400FD014 // Flash Controller Masked // Interrupt Status and Clear #define FLASH_FMC2 0x400FD020 // Flash Memory Control 2 #define FLASH_FWBVAL 0x400FD030 // Flash Write Buffer Valid #define FLASH_FLPEKEY 0x400FD03C // Flash Program/Erase Key #define FLASH_FWBN 0x400FD100 // Flash Write Buffer n #define FLASH_PP 0x400FDFC0 // Flash Peripheral Properties #define FLASH_FSIZE 0x400FDFC0 // Flash Size #define FLASH_SSIZE 0x400FDFC4 // SRAM Size #define FLASH_CONF 0x400FDFC8 // Flash Configuration Register #define FLASH_ROMSWMAP 0x400FDFCC // ROM Software Map #define FLASH_DMASZ 0x400FDFD0 // Flash DMA Address Size #define FLASH_DMAST 0x400FDFD4 // Flash DMA Starting Address #define FLASH_RVP 0x400FE0D4 // Reset Vector Pointer #define FLASH_RMCTL 0x400FE0F0 // ROM Control #define FLASH_BOOTCFG 0x400FE1D0 // Boot Configuration #define FLASH_USERREG0 0x400FE1E0 // User Register 0 #define FLASH_USERREG1 0x400FE1E4 // User Register 1 #define FLASH_USERREG2 0x400FE1E8 // User Register 2 #define FLASH_USERREG3 0x400FE1EC // User Register 3 #define FLASH_FMPRE0 0x400FE200 // Flash Memory Protection Read // Enable 0 #define FLASH_FMPRE1 0x400FE204 // Flash Memory Protection Read // Enable 1 #define FLASH_FMPRE2 0x400FE208 // Flash Memory Protection Read // Enable 2 #define FLASH_FMPRE3 0x400FE20C // Flash Memory Protection Read // Enable 3 #define FLASH_FMPRE4 0x400FE210 // Flash Memory Protection Read // Enable 4 #define FLASH_FMPRE5 0x400FE214 // Flash Memory Protection Read // Enable 5 #define FLASH_FMPRE6 0x400FE218 // Flash Memory Protection Read // Enable 6 #define FLASH_FMPRE7 0x400FE21C // Flash Memory Protection Read // Enable 7 #define FLASH_FMPRE8 0x400FE220 // Flash Memory Protection Read // Enable 8 #define FLASH_FMPRE9 0x400FE224 // Flash Memory Protection Read // Enable 9 #define FLASH_FMPRE10 0x400FE228 // Flash Memory Protection Read // Enable 10 #define FLASH_FMPRE11 0x400FE22C // Flash Memory Protection Read // Enable 11 #define FLASH_FMPRE12 0x400FE230 // Flash Memory Protection Read // Enable 12 #define FLASH_FMPRE13 0x400FE234 // Flash Memory Protection Read // Enable 13 #define FLASH_FMPRE14 0x400FE238 // Flash Memory Protection Read // Enable 14 #define FLASH_FMPRE15 0x400FE23C // Flash Memory Protection Read // Enable 15 #define FLASH_FMPPE0 0x400FE400 // Flash Memory Protection Program // Enable 0 #define FLASH_FMPPE1 0x400FE404 // Flash Memory Protection Program // Enable 1 #define FLASH_FMPPE2 0x400FE408 // Flash Memory Protection Program // Enable 2 #define FLASH_FMPPE3 0x400FE40C // Flash Memory Protection Program // Enable 3 #define FLASH_FMPPE4 0x400FE410 // Flash Memory Protection Program // Enable 4 #define FLASH_FMPPE5 0x400FE414 // Flash Memory Protection Program // Enable 5 #define FLASH_FMPPE6 0x400FE418 // Flash Memory Protection Program // Enable 6 #define FLASH_FMPPE7 0x400FE41C // Flash Memory Protection Program // Enable 7 #define FLASH_FMPPE8 0x400FE420 // Flash Memory Protection Program // Enable 8 #define FLASH_FMPPE9 0x400FE424 // Flash Memory Protection Program // Enable 9 #define FLASH_FMPPE10 0x400FE428 // Flash Memory Protection Program // Enable 10 #define FLASH_FMPPE11 0x400FE42C // Flash Memory Protection Program // Enable 11 #define FLASH_FMPPE12 0x400FE430 // Flash Memory Protection Program // Enable 12 #define FLASH_FMPPE13 0x400FE434 // Flash Memory Protection Program // Enable 13 #define FLASH_FMPPE14 0x400FE438 // Flash Memory Protection Program // Enable 14 #define FLASH_FMPPE15 0x400FE43C // Flash Memory Protection Program // Enable 15 //***************************************************************************** // // The following are defines for the bit fields in the FLASH_FMA register. // //***************************************************************************** #define FLASH_FMA_OFFSET_M 0x000FFFFF // Address Offset #define FLASH_FMA_OFFSET_S 0 //***************************************************************************** // // The following are defines for the bit fields in the FLASH_FMD register. // //***************************************************************************** #define FLASH_FMD_DATA_M 0xFFFFFFFF // Data Value #define FLASH_FMD_DATA_S 0 //***************************************************************************** // // The following are defines for the bit fields in the FLASH_FMC register. // //***************************************************************************** #define FLASH_FMC_WRKEY 0xA4420000 // FLASH write key #define FLASH_FMC_COMT 0x00000008 // Commit Register Value #define FLASH_FMC_MERASE 0x00000004 // Mass Erase Flash Memory #define FLASH_FMC_ERASE 0x00000002 // Erase a Page of Flash Memory #define FLASH_FMC_WRITE 0x00000001 // Write a Word into Flash Memory //***************************************************************************** // // The following are defines for the bit fields in the FLASH_FCRIS register. // //***************************************************************************** #define FLASH_FCRIS_PROGRIS 0x00002000 // Program Verify Error Raw // Interrupt Status #define FLASH_FCRIS_ERRIS 0x00000800 // Erase Verify Error Raw Interrupt // Status #define FLASH_FCRIS_INVDRIS 0x00000400 // Invalid Data Raw Interrupt // Status #define FLASH_FCRIS_VOLTRIS 0x00000200 // Pump Voltage Raw Interrupt // Status #define FLASH_FCRIS_ERIS 0x00000004 // EEPROM Raw Interrupt Status #define FLASH_FCRIS_PRIS 0x00000002 // Programming Raw Interrupt Status #define FLASH_FCRIS_ARIS 0x00000001 // Access Raw Interrupt Status //***************************************************************************** // // The following are defines for the bit fields in the FLASH_FCIM register. // //***************************************************************************** #define FLASH_FCIM_PROGMASK 0x00002000 // PROGVER Interrupt Mask #define FLASH_FCIM_ERMASK 0x00000800 // ERVER Interrupt Mask #define FLASH_FCIM_INVDMASK 0x00000400 // Invalid Data Interrupt Mask #define FLASH_FCIM_VOLTMASK 0x00000200 // VOLT Interrupt Mask #define FLASH_FCIM_EMASK 0x00000004 // EEPROM Interrupt Mask #define FLASH_FCIM_PMASK 0x00000002 // Programming Interrupt Mask #define FLASH_FCIM_AMASK 0x00000001 // Access Interrupt Mask //***************************************************************************** // // The following are defines for the bit fields in the FLASH_FCMISC register. // //***************************************************************************** #define FLASH_FCMISC_PROGMISC 0x00002000 // PROGVER Masked Interrupt Status // and Clear #define FLASH_FCMISC_ERMISC 0x00000800 // ERVER Masked Interrupt Status // and Clear #define FLASH_FCMISC_INVDMISC 0x00000400 // Invalid Data Masked Interrupt // Status and Clear #define FLASH_FCMISC_VOLTMISC 0x00000200 // VOLT Masked Interrupt Status and // Clear #define FLASH_FCMISC_EMISC 0x00000004 // EEPROM Masked Interrupt Status // and Clear #define FLASH_FCMISC_PMISC 0x00000002 // Programming Masked Interrupt // Status and Clear #define FLASH_FCMISC_AMISC 0x00000001 // Access Masked Interrupt Status // and Clear //***************************************************************************** // // The following are defines for the bit fields in the FLASH_FMC2 register. // //***************************************************************************** #define FLASH_FMC2_WRKEY 0xA4420000 // FLASH write key #define FLASH_FMC2_WRBUF 0x00000001 // Buffered Flash Memory Write //***************************************************************************** // // The following are defines for the bit fields in the FLASH_FWBVAL register. // //***************************************************************************** #define FLASH_FWBVAL_FWB_M 0xFFFFFFFF // Flash Memory Write Buffer //***************************************************************************** // // The following are defines for the bit fields in the FLASH_FLPEKEY register. // //***************************************************************************** #define FLASH_FLPEKEY_PEKEY_M 0x0000FFFF // Key Value #define FLASH_FLPEKEY_PEKEY_S 0 //***************************************************************************** // // The following are defines for the bit fields in the FLASH_FWBN register. // //***************************************************************************** #define FLASH_FWBN_DATA_M 0xFFFFFFFF // Data //***************************************************************************** // // The following are defines for the bit fields in the FLASH_PP register. // //***************************************************************************** #define FLASH_PP_PFC 0x40000000 // Prefetch Buffer Mode #define FLASH_PP_FMM 0x20000000 // Flash Mirror Mode #define FLASH_PP_DFA 0x10000000 // DMA Flash Access #define FLASH_PP_EESS_M 0x00780000 // EEPROM Sector Size of the // physical bank #define FLASH_PP_EESS_1KB 0x00000000 // 1 KB #define FLASH_PP_EESS_2KB 0x00080000 // 2 KB #define FLASH_PP_EESS_4KB 0x00100000 // 4 KB #define FLASH_PP_EESS_8KB 0x00180000 // 8 KB #define FLASH_PP_MAINSS_M 0x00070000 // Flash Sector Size of the // physical bank #define FLASH_PP_MAINSS_1KB 0x00000000 // 1 KB #define FLASH_PP_MAINSS_2KB 0x00010000 // 2 KB #define FLASH_PP_MAINSS_4KB 0x00020000 // 4 KB #define FLASH_PP_MAINSS_8KB 0x00030000 // 8 KB #define FLASH_PP_MAINSS_16KB 0x00040000 // 16 KB #define FLASH_PP_SIZE_M 0x0000FFFF // Flash Size #define FLASH_PP_SIZE_512KB 0x000000FF // 512 KB of Flash #define FLASH_PP_SIZE_1MB 0x000001FF // 1024 KB of Flash //***************************************************************************** // // The following are defines for the bit fields in the FLASH_FSIZE register. // //***************************************************************************** #define FLASH_FSIZE_SIZE_M 0x0000FFFF // Flash Size #define FLASH_FSIZE_SIZE_32KB 0x0000000F // 32 KB of Flash #define FLASH_FSIZE_SIZE_64KB 0x0000001F // 64 KB of Flash #define FLASH_FSIZE_SIZE_128KB 0x0000003F // 128 KB of Flash #define FLASH_FSIZE_SIZE_256KB 0x0000007F // 256 KB of Flash //***************************************************************************** // // The following are defines for the bit fields in the FLASH_SSIZE register. // //***************************************************************************** #define FLASH_SSIZE_SIZE_M 0x0000FFFF // SRAM Size #define FLASH_SSIZE_SIZE_12KB 0x0000002F // 12 KB of SRAM #define FLASH_SSIZE_SIZE_24KB 0x0000005F // 24 KB of SRAM #define FLASH_SSIZE_SIZE_32KB 0x0000007F // 32 KB of SRAM #define FLASH_SSIZE_SIZE_256KB 0x000003FF // 256 KB of SRAM //***************************************************************************** // // The following are defines for the bit fields in the FLASH_CONF register. // //***************************************************************************** #define FLASH_CONF_FMME 0x40000000 // Flash Mirror Mode Enable #define FLASH_CONF_SPFE 0x20000000 // Single Prefetch Mode Enable #define FLASH_CONF_CLRTV 0x00100000 // Clear Valid Tags #define FLASH_CONF_FPFON 0x00020000 // Force Prefetch On #define FLASH_CONF_FPFOFF 0x00010000 // Force Prefetch Off //***************************************************************************** // // The following are defines for the bit fields in the FLASH_ROMSWMAP register. // //***************************************************************************** #define FLASH_ROMSWMAP_SAFERTOS 0x00000001 // SafeRTOS Present #define FLASH_ROMSWMAP_SW0EN_M 0x00000003 // ROM SW Region 0 Availability #define FLASH_ROMSWMAP_SW0EN_NOTVIS \ 0x00000000 // Software region not available to // the core #define FLASH_ROMSWMAP_SW0EN_CORE \ 0x00000001 // Region available to core #define FLASH_ROMSWMAP_SW1EN_M 0x0000000C // ROM SW Region 1 Availability #define FLASH_ROMSWMAP_SW1EN_NOTVIS \ 0x00000000 // Software region not available to // the core #define FLASH_ROMSWMAP_SW1EN_CORE \ 0x00000004 // Region available to core #define FLASH_ROMSWMAP_SW2EN_M 0x00000030 // ROM SW Region 2 Availability #define FLASH_ROMSWMAP_SW2EN_NOTVIS \ 0x00000000 // Software region not available to // the core #define FLASH_ROMSWMAP_SW2EN_CORE \ 0x00000010 // Region available to core #define FLASH_ROMSWMAP_SW3EN_M 0x000000C0 // ROM SW Region 3 Availability #define FLASH_ROMSWMAP_SW3EN_NOTVIS \ 0x00000000 // Software region not available to // the core #define FLASH_ROMSWMAP_SW3EN_CORE \ 0x00000040 // Region available to core #define FLASH_ROMSWMAP_SW4EN_M 0x00000300 // ROM SW Region 4 Availability #define FLASH_ROMSWMAP_SW4EN_NOTVIS \ 0x00000000 // Software region not available to // the core #define FLASH_ROMSWMAP_SW4EN_CORE \ 0x00000100 // Region available to core #define FLASH_ROMSWMAP_SW5EN_M 0x00000C00 // ROM SW Region 5 Availability #define FLASH_ROMSWMAP_SW5EN_NOTVIS \ 0x00000000 // Software region not available to // the core #define FLASH_ROMSWMAP_SW5EN_CORE \ 0x00000400 // Region available to core #define FLASH_ROMSWMAP_SW6EN_M 0x00003000 // ROM SW Region 6 Availability #define FLASH_ROMSWMAP_SW6EN_NOTVIS \ 0x00000000 // Software region not available to // the core #define FLASH_ROMSWMAP_SW6EN_CORE \ 0x00001000 // Region available to core #define FLASH_ROMSWMAP_SW7EN_M 0x0000C000 // ROM SW Region 7 Availability #define FLASH_ROMSWMAP_SW7EN_NOTVIS \ 0x00000000 // Software region not available to // the core #define FLASH_ROMSWMAP_SW7EN_CORE \ 0x00004000 // Region available to core //***************************************************************************** // // The following are defines for the bit fields in the FLASH_DMASZ register. // //***************************************************************************** #define FLASH_DMASZ_SIZE_M 0x0003FFFF // uDMA-accessible Memory Size #define FLASH_DMASZ_SIZE_S 0 //***************************************************************************** // // The following are defines for the bit fields in the FLASH_DMAST register. // //***************************************************************************** #define FLASH_DMAST_ADDR_M 0x1FFFF800 // Contains the starting address of // the flash region accessible by // uDMA if the FLASHPP register DFA // bit is set #define FLASH_DMAST_ADDR_S 11 //***************************************************************************** // // The following are defines for the bit fields in the FLASH_RVP register. // //***************************************************************************** #define FLASH_RVP_RV_M 0xFFFFFFFF // Reset Vector Pointer Address #define FLASH_RVP_RV_S 0 //***************************************************************************** // // The following are defines for the bit fields in the FLASH_RMCTL register. // //***************************************************************************** #define FLASH_RMCTL_BA 0x00000001 // Boot Alias //***************************************************************************** // // The following are defines for the bit fields in the FLASH_BOOTCFG register. // //***************************************************************************** #define FLASH_BOOTCFG_NW 0x80000000 // Not Written #define FLASH_BOOTCFG_PORT_M 0x0000E000 // Boot GPIO Port #define FLASH_BOOTCFG_PORT_A 0x00000000 // Port A #define FLASH_BOOTCFG_PORT_B 0x00002000 // Port B #define FLASH_BOOTCFG_PORT_C 0x00004000 // Port C #define FLASH_BOOTCFG_PORT_D 0x00006000 // Port D #define FLASH_BOOTCFG_PORT_E 0x00008000 // Port E #define FLASH_BOOTCFG_PORT_F 0x0000A000 // Port F #define FLASH_BOOTCFG_PORT_G 0x0000C000 // Port G #define FLASH_BOOTCFG_PORT_H 0x0000E000 // Port H #define FLASH_BOOTCFG_PIN_M 0x00001C00 // Boot GPIO Pin #define FLASH_BOOTCFG_PIN_0 0x00000000 // Pin 0 #define FLASH_BOOTCFG_PIN_1 0x00000400 // Pin 1 #define FLASH_BOOTCFG_PIN_2 0x00000800 // Pin 2 #define FLASH_BOOTCFG_PIN_3 0x00000C00 // Pin 3 #define FLASH_BOOTCFG_PIN_4 0x00001000 // Pin 4 #define FLASH_BOOTCFG_PIN_5 0x00001400 // Pin 5 #define FLASH_BOOTCFG_PIN_6 0x00001800 // Pin 6 #define FLASH_BOOTCFG_PIN_7 0x00001C00 // Pin 7 #define FLASH_BOOTCFG_POL 0x00000200 // Boot GPIO Polarity #define FLASH_BOOTCFG_EN 0x00000100 // Boot GPIO Enable #define FLASH_BOOTCFG_KEY 0x00000010 // KEY Select #define FLASH_BOOTCFG_DBG1 0x00000002 // Debug Control 1 #define FLASH_BOOTCFG_DBG0 0x00000001 // Debug Control 0 //***************************************************************************** // // The following are defines for the bit fields in the FLASH_USERREG0 register. // //***************************************************************************** #define FLASH_USERREG0_DATA_M 0xFFFFFFFF // User Data #define FLASH_USERREG0_DATA_S 0 //***************************************************************************** // // The following are defines for the bit fields in the FLASH_USERREG1 register. // //***************************************************************************** #define FLASH_USERREG1_DATA_M 0xFFFFFFFF // User Data #define FLASH_USERREG1_DATA_S 0 //***************************************************************************** // // The following are defines for the bit fields in the FLASH_USERREG2 register. // //***************************************************************************** #define FLASH_USERREG2_DATA_M 0xFFFFFFFF // User Data #define FLASH_USERREG2_DATA_S 0 //***************************************************************************** // // The following are defines for the bit fields in the FLASH_USERREG3 register. // //***************************************************************************** #define FLASH_USERREG3_DATA_M 0xFFFFFFFF // User Data #define FLASH_USERREG3_DATA_S 0 //***************************************************************************** // // The following are defines for the bit fields in the FLASH_FMPRE8 register. // //***************************************************************************** #define FLASH_FMPRE8_READ_ENABLE_M \ 0xFFFFFFFF // Flash Read Enable #define FLASH_FMPRE8_READ_ENABLE_S \ 0 //***************************************************************************** // // The following are defines for the bit fields in the FLASH_FMPRE9 register. // //***************************************************************************** #define FLASH_FMPRE9_READ_ENABLE_M \ 0xFFFFFFFF // Flash Read Enable #define FLASH_FMPRE9_READ_ENABLE_S \ 0 //***************************************************************************** // // The following are defines for the bit fields in the FLASH_FMPRE10 register. // //***************************************************************************** #define FLASH_FMPRE10_READ_ENABLE_M \ 0xFFFFFFFF // Flash Read Enable #define FLASH_FMPRE10_READ_ENABLE_S \ 0 //***************************************************************************** // // The following are defines for the bit fields in the FLASH_FMPRE11 register. // //***************************************************************************** #define FLASH_FMPRE11_READ_ENABLE_M \ 0xFFFFFFFF // Flash Read Enable #define FLASH_FMPRE11_READ_ENABLE_S \ 0 //***************************************************************************** // // The following are defines for the bit fields in the FLASH_FMPRE12 register. // //***************************************************************************** #define FLASH_FMPRE12_READ_ENABLE_M \ 0xFFFFFFFF // Flash Read Enable #define FLASH_FMPRE12_READ_ENABLE_S \ 0 //***************************************************************************** // // The following are defines for the bit fields in the FLASH_FMPRE13 register. // //***************************************************************************** #define FLASH_FMPRE13_READ_ENABLE_M \ 0xFFFFFFFF // Flash Read Enable #define FLASH_FMPRE13_READ_ENABLE_S \ 0 //***************************************************************************** // // The following are defines for the bit fields in the FLASH_FMPRE14 register. // //***************************************************************************** #define FLASH_FMPRE14_READ_ENABLE_M \ 0xFFFFFFFF // Flash Read Enable #define FLASH_FMPRE14_READ_ENABLE_S \ 0 //***************************************************************************** // // The following are defines for the bit fields in the FLASH_FMPRE15 register. // //***************************************************************************** #define FLASH_FMPRE15_READ_ENABLE_M \ 0xFFFFFFFF // Flash Read Enable #define FLASH_FMPRE15_READ_ENABLE_S \ 0 //***************************************************************************** // // The following are defines for the bit fields in the FLASH_FMPPE8 register. // //***************************************************************************** #define FLASH_FMPPE8_PROG_ENABLE_M \ 0xFFFFFFFF // Flash Programming Enable #define FLASH_FMPPE8_PROG_ENABLE_S \ 0 //***************************************************************************** // // The following are defines for the bit fields in the FLASH_FMPPE9 register. // //***************************************************************************** #define FLASH_FMPPE9_PROG_ENABLE_M \ 0xFFFFFFFF // Flash Programming Enable #define FLASH_FMPPE9_PROG_ENABLE_S \ 0 //***************************************************************************** // // The following are defines for the bit fields in the FLASH_FMPPE10 register. // //***************************************************************************** #define FLASH_FMPPE10_PROG_ENABLE_M \ 0xFFFFFFFF // Flash Programming Enable #define FLASH_FMPPE10_PROG_ENABLE_S \ 0 //***************************************************************************** // // The following are defines for the bit fields in the FLASH_FMPPE11 register. // //***************************************************************************** #define FLASH_FMPPE11_PROG_ENABLE_M \ 0xFFFFFFFF // Flash Programming Enable #define FLASH_FMPPE11_PROG_ENABLE_S \ 0 //***************************************************************************** // // The following are defines for the bit fields in the FLASH_FMPPE12 register. // //***************************************************************************** #define FLASH_FMPPE12_PROG_ENABLE_M \ 0xFFFFFFFF // Flash Programming Enable #define FLASH_FMPPE12_PROG_ENABLE_S \ 0 //***************************************************************************** // // The following are defines for the bit fields in the FLASH_FMPPE13 register. // //***************************************************************************** #define FLASH_FMPPE13_PROG_ENABLE_M \ 0xFFFFFFFF // Flash Programming Enable #define FLASH_FMPPE13_PROG_ENABLE_S \ 0 //***************************************************************************** // // The following are defines for the bit fields in the FLASH_FMPPE14 register. // //***************************************************************************** #define FLASH_FMPPE14_PROG_ENABLE_M \ 0xFFFFFFFF // Flash Programming Enable #define FLASH_FMPPE14_PROG_ENABLE_S \ 0 //***************************************************************************** // // The following are defines for the bit fields in the FLASH_FMPPE15 register. // //***************************************************************************** #define FLASH_FMPPE15_PROG_ENABLE_M \ 0xFFFFFFFF // Flash Programming Enable #define FLASH_FMPPE15_PROG_ENABLE_S \ 0 //***************************************************************************** // // The following are defines for the erase size of the FLASH block that is // erased by an erase operation, and the protect size is the size of the FLASH // block that is protected by each protection register. // //***************************************************************************** #define FLASH_PROTECT_SIZE 0x00000800 #define FLASH_ERASE_SIZE 0x00000400 #endif // __HW_FLASH_H__